diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/mmc/host/au1xmmc.c | 45 | ||||
| -rw-r--r-- | drivers/mtd/nand/au1550nd.c | 298 | ||||
| -rw-r--r-- | drivers/net/irda/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/net/irda/au1000_ircc.h | 125 | ||||
| -rw-r--r-- | drivers/net/irda/au1k_ir.c | 1229 | ||||
| -rw-r--r-- | drivers/pcmcia/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/pcmcia/Makefile | 4 | ||||
| -rw-r--r-- | drivers/pcmcia/au1000_generic.c | 545 | ||||
| -rw-r--r-- | drivers/pcmcia/au1000_generic.h | 135 | ||||
| -rw-r--r-- | drivers/pcmcia/au1000_pb1x00.c | 294 | ||||
| -rw-r--r-- | drivers/pcmcia/db1xxx_ss.c | 26 | ||||
| -rw-r--r-- | drivers/spi/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/usb/host/alchemy-common.c | 277 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-au1xxx.c | 13 | ||||
| -rw-r--r-- | drivers/video/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/video/au1100fb.c | 12 | ||||
| -rw-r--r-- | drivers/video/au1200fb.c | 273 |
18 files changed, 1299 insertions, 2007 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a3afac4..cbe7a2f 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -299,11 +299,11 @@ config I2C_AT91 unless your system can cope with those limitations. config I2C_AU1550 - tristate "Au1550/Au1200 SMBus interface" + tristate "Au1550/Au1200/Au1300 SMBus interface" depends on MIPS_ALCHEMY help If you say yes to this option, support will be included for the - Au1550 and Au1200 SMBus interface. + Au1550/Au1200/Au1300 SMBus interface. This driver can also be built as a module. If so, the module will be called i2c-au1550. diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 5d3b9ae..dbd0c8a 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -153,6 +153,7 @@ static inline int has_dbdma(void) { switch (alchemy_get_cputype()) { case ALCHEMY_CPU_AU1200: + case ALCHEMY_CPU_AU1300: return 1; default: return 0; @@ -768,11 +769,15 @@ static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) config2 = au_readl(HOST_CONFIG2(host)); switch (ios->bus_width) { + case MMC_BUS_WIDTH_8: + config2 |= SD_CONFIG2_BB; + break; case MMC_BUS_WIDTH_4: + config2 &= ~SD_CONFIG2_BB; config2 |= SD_CONFIG2_WB; break; case MMC_BUS_WIDTH_1: - config2 &= ~SD_CONFIG2_WB; + config2 &= ~(SD_CONFIG2_WB | SD_CONFIG2_BB); break; } au_writel(config2, HOST_CONFIG2(host)); @@ -943,7 +948,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) struct mmc_host *mmc; struct au1xmmc_host *host; struct resource *r; - int ret; + int ret, iflag; mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev); if (!mmc) { @@ -982,37 +987,43 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no IRQ defined\n"); goto out3; } - host->irq = r->start; - /* IRQ is shared among both SD controllers */ - ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED, - DRIVER_NAME, host); - if (ret) { - dev_err(&pdev->dev, "cannot grab IRQ\n"); - goto out3; - } mmc->ops = &au1xmmc_ops; mmc->f_min = 450000; mmc->f_max = 24000000; + mmc->max_blk_size = 2048; + mmc->max_blk_count = 512; + + mmc->ocr_avail = AU1XMMC_OCR; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; + + iflag = IRQF_SHARED; /* Au1100/Au1200: one int for both ctrls */ + switch (alchemy_get_cputype()) { case ALCHEMY_CPU_AU1100: mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE; - mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; break; case ALCHEMY_CPU_AU1200: mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE; - mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; + break; + case ALCHEMY_CPU_AU1300: + iflag = 0; /* nothing is shared */ + mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE; + mmc->f_max = 52000000; + if (host->ioarea->start == AU1100_SD0_PHYS_ADDR) + mmc->caps |= MMC_CAP_8_BIT_DATA; break; } - mmc->max_blk_size = 2048; - mmc->max_blk_count = 512; - - mmc->ocr_avail = AU1XMMC_OCR; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + ret = request_irq(host->irq, au1xmmc_irq, iflag, DRIVER_NAME, host); + if (ret) { + dev_err(&pdev->dev, "cannot grab IRQ\n"); + goto out3; + } host->status = HOST_S_IDLE; diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 7dd3700..73abbc3 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -17,35 +17,19 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/platform_device.h> #include <asm/io.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1550nd.h> -#ifdef CONFIG_MIPS_PB1550 -#include <asm/mach-pb1x00/pb1550.h> -#elif defined(CONFIG_MIPS_DB1550) -#include <asm/mach-db1x00/db1x00.h> -#endif -#include <asm/mach-db1x00/bcsr.h> -/* - * MTD structure for NAND controller - */ -static struct mtd_info *au1550_mtd = NULL; -static void __iomem *p_nand; -static int nand_width = 1; /* default x8 */ -static void (*au1550_write_byte)(struct mtd_info *, u_char); +struct au1550nd_ctx { + struct mtd_info info; + struct nand_chip chip; -/* - * Define partitions for flash device - */ -static const struct mtd_partition partition_info[] = { - { - .name = "NAND FS 0", - .offset = 0, - .size = 8 * 1024 * 1024}, - { - .name = "NAND FS 1", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL} + int cs; + void __iomem *base; + void (*write_byte)(struct mtd_info *, u_char); }; /** @@ -259,24 +243,25 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len) static void au1550_hwcontrol(struct mtd_info *mtd, int cmd) { - register struct nand_chip *this = mtd->priv; + struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info); + struct nand_chip *this = mtd->priv; switch (cmd) { case NAND_CTL_SETCLE: - this->IO_ADDR_W = p_nand + MEM_STNAND_CMD; + this->IO_ADDR_W = ctx->base + MEM_STNAND_CMD; break; case NAND_CTL_CLRCLE: - this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; + this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA; break; case NAND_CTL_SETALE: - this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR; + this->IO_ADDR_W = ctx->base + MEM_STNAND_ADDR; break; case NAND_CTL_CLRALE: - this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; + this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA; /* FIXME: Nobody knows why this is necessary, * but it works only that way */ udelay(1); @@ -284,7 +269,7 @@ static void au1550_hwcontrol(struct mtd_info *mtd, int cmd) case NAND_CTL_SETNCE: /* assert (force assert) chip enable */ - au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL); + au_writel((1 << (4 + ctx->cs)), MEM_STNDCTL); break; case NAND_CTL_CLRNCE: @@ -331,9 +316,10 @@ static void au1550_select_chip(struct mtd_info *mtd, int chip) */ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr) { - register struct nand_chip *this = mtd->priv; + struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info); + struct nand_chip *this = mtd->priv; int ce_override = 0, i; - ulong flags; + unsigned long flags = 0; /* Begin command latch cycle */ au1550_hwcontrol(mtd, NAND_CTL_SETCLE); @@ -354,9 +340,9 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i column -= 256; readcmd = NAND_CMD_READ1; } - au1550_write_byte(mtd, readcmd); + ctx->write_byte(mtd, readcmd); } - au1550_write_byte(mtd, command); + ctx->write_byte(mtd, command); /* Set ALE and clear CLE to start address cycle */ au1550_hwcontrol(mtd, NAND_CTL_CLRCLE); @@ -369,10 +355,10 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i /* Adjust columns for 16 bit buswidth */ if (this->options & NAND_BUSWIDTH_16) column >>= 1; - au1550_write_byte(mtd, column); + ctx->write_byte(mtd, column); } if (page_addr != -1) { - au1550_write_byte(mtd, (u8)(page_addr & 0xff)); + ctx->write_byte(mtd, (u8)(page_addr & 0xff)); if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || @@ -390,11 +376,12 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i au1550_hwcontrol(mtd, NAND_CTL_SETNCE); } - au1550_write_byte(mtd, (u8)(page_addr >> 8)); + ctx->write_byte(mtd, (u8)(page_addr >> 8)); /* One more address cycle for devices > 32MiB */ if (this->chipsize > (32 << 20)) - au1550_write_byte(mtd, (u8)((page_addr >> 16) & 0x0f)); + ctx->write_byte(mtd, + ((page_addr >> 16) & 0x0f)); } /* Latch in address */ au1550_hwcontrol(mtd, NAND_CTL_CLRALE); @@ -440,121 +427,79 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i while(!this->dev_ready(mtd)); } - -/* - * Main initialization routine - */ -static int __init au1xxx_nand_init(void) +static int __devinit find_nand_cs(unsigned long nand_base) { - struct nand_chip *this; - u16 boot_swapboot = 0; /* default value */ - int retval; - u32 mem_staddr; - u32 nand_phys; - - /* Allocate memory for MTD device structure and private data */ - au1550_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); - if (!au1550_mtd) { - printk("Unable to allocate NAND MTD dev structure.\n"); - return -ENOMEM; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&au1550_mtd[1]); - - /* Link the private data with the MTD structure */ - au1550_mtd->priv = this; - au1550_mtd->owner = THIS_MODULE; - + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR); + unsigned long addr, staddr, start, mask, end; + int i; - /* MEM_STNDCTL: disable ints, disable nand boot */ - au_writel(0, MEM_STNDCTL); + for (i = 0; i < 4; i++) { + addr = 0x1000 + (i * 0x10); /* CSx */ + staddr = __raw_readl(base + addr + 0x08); /* STADDRx */ + /* figure out the decoded range of this CS */ + start = (staddr << 4) & 0xfffc0000; + mask = (staddr << 18) & 0xfffc0000; + end = (start | (start - 1)) & ~(start ^ mask); + if ((nand_base >= start) && (nand_base < end)) + return i; + } -#ifdef CONFIG_MIPS_PB1550 - /* set gpio206 high */ - gpio_direction_input(206); + return -ENODEV; +} - boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1); +static int __devinit au1550nd_probe(struct platform_device *pdev) +{ + struct au1550nd_platdata *pd; + struct au1550nd_ctx *ctx; + struct nand_chip *this; + struct resource *r; + int ret, cs; - switch (boot_swapboot) { - case 0: - case 2: - case 8: - case 0xC: - case 0xD: - /* x16 NAND Flash */ - nand_width = 0; - break; - case 1: - case 9: - case 3: - case 0xE: - case 0xF: - /* x8 NAND Flash */ - nand_width = 1; - break; - default: - printk("Pb1550 NAND: bad boot:swap\n"); - retval = -EINVAL; - goto outmem; + pd = pdev->dev.platform_data; + if (!pd) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; } -#endif - - /* Configure chip-select; normally done by boot code, e.g. YAMON */ -#ifdef NAND_STCFG - if (NAND_CS == 0) { - au_writel(NAND_STCFG, MEM_STCFG0); - au_writel(NAND_STTIME, MEM_STTIME0); - au_writel(NAND_STADDR, MEM_STADDR0); - } - if (NAND_CS == 1) { - au_writel(NAND_STCFG, MEM_STCFG1); - au_writel(NAND_STTIME, MEM_STTIME1); - au_writel(NAND_STADDR, MEM_STADDR1); + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + dev_err(&pdev->dev, "no memory for NAND context\n"); + return -ENOMEM; } - if (NAND_CS == 2) { - au_writel(NAND_STCFG, MEM_STCFG2); - au_writel(NAND_STTIME, MEM_STTIME2); - au_writel(NAND_STADDR, MEM_STADDR2); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no NAND memory resource\n"); + ret = -ENODEV; + goto out1; } - if (NAND_CS == 3) { - au_writel(NAND_STCFG, MEM_STCFG3); - au_writel(NAND_STTIME, MEM_STTIME3); - au_writel(NAND_STADDR, MEM_STADDR3); + if (request_mem_region(r->start, resource_size(r), "au1550-nand")) { + dev_err(&pdev->dev, "cannot claim NAND memory area\n"); + ret = -ENOMEM; + goto out1; } -#endif - - /* Locate NAND chip-select in order to determine NAND phys address */ - mem_staddr = 0x00000000; - if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0)) - mem_staddr = au_readl(MEM_STADDR0); - else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1)) - mem_staddr = au_readl(MEM_STADDR1); - else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2)) - mem_staddr = au_readl(MEM_STADDR2); - else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3)) - mem_staddr = au_readl(MEM_STADDR3); - - if (mem_staddr == 0x00000000) { - printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n"); - kfree(au1550_mtd); - return 1; + + ctx->base = ioremap_nocache(r->start, 0x1000); + if (!ctx->base) { + dev_err(&pdev->dev, "cannot remap NAND memory area\n"); + ret = -ENODEV; + goto out2; } - nand_phys = (mem_staddr << 4) & 0xFFFC0000; - p_nand = ioremap(nand_phys, 0x1000); + this = &ctx->chip; + ctx->info.priv = this; + ctx->info.owner = THIS_MODULE; - /* make controller and MTD agree */ - if (NAND_CS == 0) - nand_width = au_readl(MEM_STCFG0) & (1 << 22); - if (NAND_CS == 1) - nand_width = au_readl(MEM_STCFG1) & (1 << 22); - if (NAND_CS == 2) - nand_width = au_readl(MEM_STCFG2) & (1 << 22); - if (NAND_CS == 3) - nand_width = au_readl(MEM_STCFG3) & (1 << 22); + /* figure out which CS# r->start belongs to */ + cs = find_nand_cs(r->start); + if (cs < 0) { + dev_err(&pdev->dev, "cannot detect NAND chipselect\n"); + ret = -ENODEV; + goto out3; + } + ctx->cs = cs; - /* Set address of hardware control function */ this->dev_ready = au1550_device_ready; this->select_chip = au1550_select_chip; this->cmdfunc = au1550_command; @@ -565,54 +510,57 @@ static int __init au1xxx_nand_init(void) this->options = NAND_NO_AUTOINCR; - if (!nand_width) + if (pd->devwidth) this->options |= NAND_BUSWIDTH_16; - this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte; - au1550_write_byte = (!nand_width) ? au_write_byte16 : au_write_byte; + this->read_byte = (pd->devwidth) ? au_read_byte16 : au_read_byte; + ctx->write_byte = (pd->devwidth) ? au_write_byte16 : au_write_byte; this->read_word = au_read_word; - this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf; - this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf; - this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf; - - /* Scan to find existence of the device */ - if (nand_scan(au1550_mtd, 1)) { - retval = -ENXIO; - goto outio; + this->write_buf = (pd->devwidth) ? au_write_buf16 : au_write_buf; + this->read_buf = (pd->devwidth) ? au_read_buf16 : au_read_buf; + this->verify_buf = (pd->devwidth) ? au_verify_buf16 : au_verify_buf; + + ret = nand_scan(&ctx->info, 1); + if (ret) { + dev_err(&pdev->dev, "NAND scan failed with %d\n", ret); + goto out3; } - /* Register the partitions */ - mtd_device_register(au1550_mtd, partition_info, - ARRAY_SIZE(partition_info)); + mtd_device_register(&ctx->info, pd->parts, pd->num_parts); return 0; - outio: - iounmap(p_nand); - - outmem: - kfree(au1550_mtd); - return retval; +out3: + iounmap(ctx->base); +out2: + release_mem_region(r->start, resource_size(r)); +out1: + kfree(ctx); + return ret; } -module_init(au1xxx_nand_init); - -/* - * Clean up routine - */ -static void __exit au1550_cleanup(void) +static int __devexit au1550nd_remove(struct platform_device *pdev) { - /* Release resources, unregister device */ - nand_release(au1550_mtd); + struct au1550nd_ctx *ctx = platform_get_drvdata(pdev); + struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - /* Free the MTD device structure */ - kfree(au1550_mtd); - - /* Unmap */ - iounmap(p_nand); + nand_release(&ctx->info); + iounmap(ctx->base); + release_mem_region(r->start, 0x1000); + kfree(ctx); + return 0; } -module_exit(au1550_cleanup); +static struct platform_driver au1550nd_driver = { + .driver = { + .name = "au1550-nand", + .owner = THIS_MODULE, + }, + .probe = au1550nd_probe, + .remove = __devexit_p(au1550nd_remove), +}; + +module_platform_driver(au1550nd_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Embedded Edge, LLC"); diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index d423d18..e535137 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -313,8 +313,12 @@ config TOSHIBA_FIR donauboe. config AU1000_FIR - tristate "Alchemy Au1000 SIR/FIR" + tristate "Alchemy IrDA SIR/FIR" depends on IRDA && MIPS_ALCHEMY + help + Say Y/M here to build suppor the the IrDA peripheral on the + Alchemy Au1000 and Au1100 SoCs. + Say M to build a module; it will be called au1k_ir.ko config SMC_IRCC_FIR tristate "SMSC IrCC (EXPERIMENTAL)" diff --git a/drivers/net/irda/au1000_ircc.h b/drivers/net/irda/au1000_ircc.h deleted file mode 100644 index c072c09..0000000 --- a/drivers/net/irda/au1000_ircc.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Au1000 IrDA driver. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef AU1000_IRCC_H -#define AU1000_IRCC_H - -#include <linux/time.h> - -#include <linux/spinlock.h> -#include <linux/pm.h> -#include <asm/io.h> - -#define NUM_IR_IFF 1 -#define NUM_IR_DESC 64 -#define RING_SIZE_4 0x0 -#define RING_SIZE_16 0x3 -#define RING_SIZE_64 0xF -#define MAX_NUM_IR_DESC 64 -#define MAX_BUF_SIZE 2048 - -#define BPS_115200 0 -#define BPS_57600 1 -#define BPS_38400 2 -#define BPS_19200 5 -#define BPS_9600 11 -#define BPS_2400 47 - -/* Ring descriptor flags */ -#define AU_OWN (1<<7) /* tx,rx */ - -#define IR_DIS_CRC (1<<6) /* tx */ -#define IR_BAD_CRC (1<<5) /* tx */ -#define IR_NEED_PULSE (1<<4) /* tx */ -#define IR_FORCE_UNDER (1<<3) /* tx */ -#define IR_DISABLE_TX (1<<2) /* tx */ -#define IR_HW_UNDER (1<<0) /* tx */ -#define IR_TX_ERROR (IR_DIS_CRC|IR_BAD_CRC|IR_HW_UNDER) - -#define IR_PHY_ERROR (1<<6) /* rx */ -#define IR_CRC_ERROR (1<<5) /* rx */ -#define IR_MAX_LEN (1<<4) /* rx */ -#define IR_FIFO_OVER (1<<3) /* rx */ -#define IR_SIR_ERROR (1<<2) /* rx */ -#define IR_RX_ERROR (IR_PHY_ERROR|IR_CRC_ERROR| \ - IR_MAX_LEN|IR_FIFO_OVER|IR_SIR_ERROR) - -typedef struct db_dest { - struct db_dest *pnext; - volatile u32 *vaddr; - dma_addr_t dma_addr; -} db_dest_t; - - -typedef struct ring_desc { - u8 count_0; /* 7:0 */ - u8 count_1; /* 12:8 */ - u8 reserved; - u8 flags; - u8 addr_0; /* 7:0 */ - u8 addr_1; /* 15:8 */ - u8 addr_2; /* 23:16 */ - u8 addr_3; /* 31:24 */ -} ring_dest_t; - - -/* Private data for each instance */ -struct au1k_private { - - db_dest_t *pDBfree; - db_dest_t db[2*NUM_IR_DESC]; - volatile ring_dest_t *rx_ring[NUM_IR_DESC]; - volatile ring_dest_t *tx_ring[NUM_IR_DESC]; - db_dest_t *rx_db_inuse[NUM_IR_DESC]; - db_dest_t *tx_db_inuse[NUM_IR_DESC]; - u32 rx_head; - u32 tx_head; - u32 tx_tail; - u32 tx_full; - - iobuff_t rx_buff; - - struct net_device *netdev; - - struct timeval stamp; - struct timeval now; - struct qos_info qos; - struct irlap_cb *irlap; - - u8 open; - u32 speed; - u32 newspeed; - - u32 intr_work_done; /* number of Rx and Tx pkts processed in the isr */ - struct timer_list timer; - - spinlock_t lock; /* For serializing operations */ -}; -#endif /* AU1000_IRCC_H */ diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c index a3d696a..fc503aa 100644 --- a/drivers/net/irda/au1k_ir.c +++ b/drivers/net/irda/au1k_ir.c @@ -18,104 +18,220 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. */ -#include <linux/module.h> -#include <linux/types.h> + #include <linux/init.h> -#include <linux/errno.h> +#include <linux/module.h> #include <linux/netdevice.h> -#include <linux/slab.h> -#include <linux/rtnetlink.h> #include <linux/interrupt.h> -#include <linux/pm.h> -#include <linux/bitops.h> - -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/au1000.h> -#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) -#include <asm/pb1000.h> -#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) -#include <asm/db1x00.h> -#include <asm/mach-db1x00/bcsr.h> -#else -#error au1k_ir: unsupported board -#endif +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <linux/types.h> #include <net/irda/irda.h> #include <net/irda/irmod.h> #include <net/irda/wrapper.h> #include <net/irda/irda_device.h> -#include "au1000_ircc.h" +#include <asm/mach-au1x00/au1000.h> + +/* registers */ +#define IR_RING_PTR_STATUS 0x00 +#define IR_RING_BASE_ADDR_H 0x04 +#define IR_RING_BASE_ADDR_L 0x08 +#define IR_RING_SIZE 0x0C +#define IR_RING_PROMPT 0x10 +#define IR_RING_ADDR_CMPR 0x14 +#define IR_INT_CLEAR 0x18 +#define IR_CONFIG_1 0x20 +#define IR_SIR_FLAGS 0x24 +#define IR_STATUS 0x28 +#define IR_READ_PHY_CONFIG 0x2C +#define IR_WRITE_PHY_CONFIG 0x30 +#define IR_MAX_PKT_LEN 0x34 +#define IR_RX_BYTE_CNT 0x38 +#define IR_CONFIG_2 0x3C +#define IR_ENABLE 0x40 + +/* Config1 */ +#define IR_RX_INVERT_LED (1 << 0) +#define IR_TX_INVERT_LED (1 << 1) +#define IR_ST (1 << 2) +#define IR_SF (1 << 3) +#define IR_SIR (1 << 4) +#define IR_MIR (1 << 5) +#define IR_FIR (1 << 6) +#define IR_16CRC (1 << 7) +#define IR_TD (1 << 8) +#define IR_RX_ALL (1 << 9) +#define IR_DMA_ENABLE (1 << 10) +#define IR_RX_ENABLE (1 << 11) +#define IR_TX_ENABLE (1 << 12) +#define IR_LOOPBACK (1 << 14) +#define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ + IR_RX_ALL | IR_RX_ENABLE | IR_SF | \ + IR_16CRC) + +/* ir_status */ +#define IR_RX_STATUS (1 << 9) +#define IR_TX_STATUS (1 << 10) +#define IR_PHYEN (1 << 15) + +/* ir_write_phy_config */ +#define IR_BR(x) (((x) & 0x3f) << 10) /* baud rate */ +#define IR_PW(x) (((x) & 0x1f) << 5) /* pulse width */ +#define IR_P(x) ((x) & 0x1f) /* preamble bits */ + +/* Config2 */ +#define IR_MODE_INV (1 << 0) +#define IR_ONE_PIN (1 << 1) +#define IR_PHYCLK_40MHZ (0 << 2) +#define IR_PHYCLK_48MHZ (1 << 2) +#define IR_PHYCLK_56MHZ (2 << 2) +#define IR_PHYCLK_64MHZ (3 << 2) +#define IR_DP (1 << 4) +#define IR_DA (1 << 5) +#define IR_FLT_HIGH (0 << 6) +#define IR_FLT_MEDHI (1 << 6) +#define IR_FLT_MEDLO (2 << 6) +#define IR_FLT_LO (3 << 6) +#define IR_IEN (1 << 8) + +/* ir_enable */ +#define IR_HC (1 << 3) /* divide SBUS clock by 2 */ +#define IR_CE (1 << 2) /* clock enable */ +#define IR_C (1 << 1) /* coherency bit */ +#define IR_BE (1 << 0) /* set in big endian mode */ + +#define NUM_IR_DESC 64 +#define RING_SIZE_4 0x0 +#define RING_SIZE_16 0x3 +#define RING_SIZE_64 0xF +#define MAX_NUM_IR_DESC 64 +#define MAX_BUF_SIZE 2048 + +/* Ring descriptor flags */ +#define AU_OWN (1 << 7) /* tx,rx */ +#define IR_DIS_CRC (1 << 6) /* tx */ +#define IR_BAD_CRC (1 << 5) /* tx */ +#define IR_NEED_PULSE (1 << 4) /* tx */ +#define IR_FORCE_UNDER (1 << 3) /* tx */ +#define IR_DISABLE_TX (1 << 2) /* tx */ +#define IR_HW_UNDER (1 << 0) /* tx */ +#define IR_TX_ERROR (IR_DIS_CRC | IR_BAD_CRC | IR_HW_UNDER) + +#define IR_PHY_ERROR (1 << 6) /* rx */ +#define IR_CRC_ERROR (1 << 5) /* rx */ +#define IR_MAX_LEN (1 << 4) /* rx */ +#define IR_FIFO_OVER (1 << 3) /* rx */ +#define IR_SIR_ERROR (1 << 2) /* rx */ +#define IR_RX_ERROR (IR_PHY_ERROR | IR_CRC_ERROR | \ + IR_MAX_LEN | IR_FIFO_OVER | IR_SIR_ERROR) + +struct db_dest { + struct db_dest *pnext; + volatile u32 *vaddr; + dma_addr_t dma_addr; +}; -static int au1k_irda_net_init(struct net_device *); -static int au1k_irda_start(struct net_device *); -static int au1k_irda_stop(struct net_device *dev); -static int au1k_irda_hard_xmit(struct sk_buff *, struct net_device *); -static int au1k_irda_rx(struct net_device *); -static void au1k_irda_interrupt(int, void *); -static void au1k_tx_timeout(struct net_device *); -static int au1k_irda_ioctl(struct net_device *, struct ifreq *, int); -static int au1k_irda_set_speed(struct net_device *dev, int speed); +struct ring_dest { + u8 count_0; /* 7:0 */ + u8 count_1; /* 12:8 */ + u8 reserved; + u8 flags; + u8 addr_0; /* 7:0 */ + u8 addr_1; /* 15:8 */ + u8 addr_2; /* 23:16 */ + u8 addr_3; /* 31:24 */ +}; -static void *dma_alloc(size_t, dma_addr_t *); -static void dma_free(void *, size_t); +/* Private data for each instance */ +struct au1k_private { + void __iomem *iobase; + int irq_rx, irq_tx; + + struct db_dest *pDBfree; + struct db_dest db[2 * NUM_IR_DESC]; + volatile struct ring_dest *rx_ring[NUM_IR_DESC]; + volatile struct ring_dest *tx_ring[NUM_IR_DESC]; + struct db_dest *rx_db_inuse[NUM_IR_DESC]; + struct db_dest *tx_db_inuse[NUM_IR_DESC]; + u32 rx_head; + u32 tx_head; + u32 tx_tail; + u32 tx_full; + + iobuff_t rx_buff; + + struct net_device *netdev; + struct timeval stamp; + struct timeval now; + struct qos_info qos; + struct irlap_cb *irlap; + + u8 open; + u32 speed; + u32 newspeed; + + struct timer_list timer; + + struct resource *ioarea; + struct au1k_irda_platform_data *platdata; +}; static int qos_mtt_bits = 0x07; /* 1 ms or more */ -static struct net_device *ir_devs[NUM_IR_IFF]; -static char version[] __devinitdata = - "au1k_ircc:1.2 ppopov@mvista.com\n"; #define RUN_AT(x) (jiffies + (x)) -static DEFINE_SPINLOCK(ir_lock); +static void au1k_irda_plat_set_phy_mode(struct au1k_private *p, int mode) +{ + if (p->platdata && p->platdata->set_phy_mode) + p->platdata->set_phy_mode(mode); +} -/* - * IrDA peripheral bug. You have to read the register - * twice to get the right value. - */ -u32 read_ir_reg(u32 addr) -{ - readl(addr); - return readl(addr); +static inline unsigned long irda_read(struct au1k_private *p, + unsigned long ofs) +{ + /* + * IrDA peripheral bug. You have to read the register + * twice to get the right value. + */ + (void)__raw_readl(p->iobase + ofs); + return __raw_readl(p->iobase + ofs); } +static inline void irda_write(struct au1k_private *p, unsigned long ofs, + unsigned long val) +{ + __raw_writel(val, p->iobase + ofs); + wmb(); +} /* * Buffer allocation/deallocation routines. The buffer descriptor returned - * has the virtual and dma address of a buffer suitable for + * has the virtual and dma address of a buffer suitable for * both, receive and transmit operations. */ -static db_dest_t *GetFreeDB(struct au1k_private *aup) +static struct db_dest *GetFreeDB(struct au1k_private *aup) { - db_dest_t *pDB; - pDB = aup->pDBfree; - - if (pDB) { - aup->pDBfree = pDB->pnext; - } - return pDB; -} + struct db_dest *db; + db = aup->pDBfree; -static void ReleaseDB(struct au1k_private *aup, db_dest_t *pDB) -{ - db_dest_t *pDBfree = aup->pDBfree; - if (pDBfree) - pDBfree->pnext = pDB; - aup->pDBfree = pDB; + if (db) + aup->pDBfree = db->pnext; + return db; } - /* DMA memory allocation, derived from pci_alloc_consistent. However, the Au1000 data cache is coherent (when programmed so), therefore we return KSEG0 address, not KSEG1. */ -static void *dma_alloc(size_t size, dma_addr_t * dma_handle) +static void *dma_alloc(size_t size, dma_addr_t *dma_handle) { void *ret; int gfp = GFP_ATOMIC | GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); + ret = (void *)__get_free_pages(gfp, get_order(size)); if (ret != NULL) { memset(ret, 0, size); @@ -125,7 +241,6 @@ static void *dma_alloc(size_t size, dma_addr_t * dma_handle) return ret; } - static void dma_free(void *vaddr, size_t size) { vaddr = (void *)KSEG0ADDR(vaddr); @@ -133,206 +248,306 @@ static void dma_free(void *vaddr, size_t size) } -static void -setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base) +static void setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base) { int i; - for (i=0; i<NUM_IR_DESC; i++) { - aup->rx_ring[i] = (volatile ring_dest_t *) - (rx_base + sizeof(ring_dest_t)*i); + for (i = 0; i < NUM_IR_DESC; i++) { + aup->rx_ring[i] = (volatile struct ring_dest *) + (rx_base + sizeof(struct ring_dest) * i); } - for (i=0; i<NUM_IR_DESC; i++) { - aup->tx_ring[i] = (volatile ring_dest_t *) - (tx_base + sizeof(ring_dest_t)*i); + for (i = 0; i < NUM_IR_DESC; i++) { + aup->tx_ring[i] = (volatile struct ring_dest *) + (tx_base + sizeof(struct ring_dest) * i); } } -static int au1k_irda_init(void) -{ - static unsigned version_printed = 0; - struct au1k_private *aup; - struct net_device *dev; - int err; - - if (version_printed++ == 0) printk(version); - - dev = alloc_irdadev(sizeof(struct au1k_private)); - if (!dev) - return -ENOMEM; - - dev->irq = AU1000_IRDA_RX_INT; /* TX has its own interrupt */ - err = au1k_irda_net_init(dev); - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - ir_devs[0] = dev; - printk(KERN_INFO "IrDA: Registered device %s\n", dev->name); - return 0; - -out1: - aup = netdev_priv(dev); - dma_free((void *)aup->db[0].vaddr, - MAX_BUF_SIZE * 2*NUM_IR_DESC); - dma_free((void *)aup->rx_ring[0], - 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t))); - kfree(aup->rx_buff.head); -out: - free_netdev(dev); - return err; -} - static int au1k_irda_init_iobuf(iobuff_t *io, int size) { io->head = kmalloc(size, GFP_KERNEL); if (io->head != NULL) { - io->truesize = size; - io->in_frame = FALSE; - io->state = OUTSIDE_FRAME; - io->data = io->head; + io->truesize = size; + io->in_frame = FALSE; + io->state = OUTSIDE_FRAME; + io->data = io->head; } return io->head ? 0 : -ENOMEM; } -static const struct net_device_ops au1k_irda_netdev_ops = { - .ndo_open = au1k_irda_start, - .ndo_stop = au1k_irda_stop, - .ndo_start_xmit = au1k_irda_hard_xmit, - .ndo_tx_timeout = au1k_tx_timeout, - .ndo_do_ioctl = au1k_irda_ioctl, -}; - -static int au1k_irda_net_init(struct net_device *dev) +/* + * Set the IrDA communications speed. + */ +static int au1k_irda_set_speed(struct net_device *dev, int speed) { struct au1k_private *aup = netdev_priv(dev); - int i, retval = 0, err; - db_dest_t *pDB, *pDBfree; - dma_addr_t temp; + volatile struct ring_dest *ptxd; + unsigned long control; + int ret = 0, timeout = 10, i; - err = au1k_irda_init_iobuf(&aup->rx_buff, 14384); - if (err) - goto out1; + if (speed == aup->speed) + return ret; - dev->netdev_ops = &au1k_irda_netdev_ops; + /* disable PHY first */ + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF); + irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) & ~IR_PHYEN); - irda_init_max_qos_capabilies(&aup->qos); + /* disable RX/TX */ + irda_write(aup, IR_CONFIG_1, + irda_read(aup, IR_CONFIG_1) & ~(IR_RX_ENABLE | IR_TX_ENABLE)); + msleep(20); + while (irda_read(aup, IR_STATUS) & (IR_RX_STATUS | IR_TX_STATUS)) { + msleep(20); + if (!timeout--) { + printk(KERN_ERR "%s: rx/tx disable timeout\n", + dev->name); + break; + } + } - /* The only value we must override it the baudrate */ - aup->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| - IR_115200|IR_576000 |(IR_4000000 << 8); - - aup->qos.min_turn_time.bits = qos_mtt_bits; - irda_qos_bits_to_value(&aup->qos); + /* disable DMA */ + irda_write(aup, IR_CONFIG_1, + irda_read(aup, IR_CONFIG_1) & ~IR_DMA_ENABLE); + msleep(20); - retval = -ENOMEM; + /* After we disable tx/rx. the index pointers go back to zero. */ + aup->tx_head = aup->tx_tail = aup->rx_head = 0; + for (i = 0; i < NUM_IR_DESC; i++) { + ptxd = aup->tx_ring[i]; + ptxd->flags = 0; + ptxd->count_0 = 0; + ptxd->count_1 = 0; + } - /* Tx ring follows rx ring + 512 bytes */ - /* we need a 1k aligned buffer */ - aup->rx_ring[0] = (ring_dest_t *) - dma_alloc(2*MAX_NUM_IR_DESC*(sizeof(ring_dest_t)), &temp); - if (!aup->rx_ring[0]) - goto out2; + for (i = 0; i < NUM_IR_DESC; i++) { + ptxd = aup->rx_ring[i]; + ptxd->count_0 = 0; + ptxd->count_1 = 0; + ptxd->flags = AU_OWN; + } - /* allocate the data buffers */ - aup->db[0].vaddr = - (void *)dma_alloc(MAX_BUF_SIZE * 2*NUM_IR_DESC, &temp); - if (!aup->db[0].vaddr) - goto out3; + if (speed == 4000000) + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_FIR); + else + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_SIR); - setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512); + switch (speed) { + case 9600: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(11) | IR_PW(12)); + irda_write(aup, IR_CONFIG_1, IR_SIR_MODE); + break; + case 19200: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(5) | IR_PW(12)); + irda_write(aup, IR_CONFIG_1, IR_SIR_MODE); + break; + case 38400: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(2) | IR_PW(12)); + irda_write(aup, IR_CONFIG_1, IR_SIR_MODE); + break; + case 57600: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(1) | IR_PW(12)); + irda_write(aup, IR_CONFIG_1, IR_SIR_MODE); + break; + case 115200: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_PW(12)); + irda_write(aup, IR_CONFIG_1, IR_SIR_MODE); + break; + case 4000000: + irda_write(aup, IR_WRITE_PHY_CONFIG, IR_P(15)); + irda_write(aup, IR_CONFIG_1, IR_FIR | IR_DMA_ENABLE | + IR_RX_ENABLE); + break; + default: + printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed); + ret = -EINVAL; + break; + } - pDBfree = NULL; - pDB = aup->db; - for (i=0; i<(2*NUM_IR_DESC); i++) { - pDB->pnext = pDBfree; - pDBfree = pDB; - pDB->vaddr = - (u32 *)((unsigned)aup->db[0].vaddr + MAX_BUF_SIZE*i); - pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr); - pDB++; + aup->speed = speed; + irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) | IR_PHYEN); + + control = irda_read(aup, IR_STATUS); + irda_write(aup, IR_RING_PROMPT, 0); + + if (control & (1 << 14)) { + printk(KERN_ERR "%s: configuration error\n", dev->name); + } else { + if (control & (1 << 11)) + printk(KERN_DEBUG "%s Valid SIR config\n", dev->name); + if (control & (1 << 12)) + printk(KERN_DEBUG "%s Valid MIR config\n", dev->name); + if (control & (1 << 13)) + printk(KERN_DEBUG "%s Valid FIR config\n", dev->name); + if (control & (1 << 10)) + printk(KERN_DEBUG "%s TX enabled\n", dev->name); + if (control & (1 << 9)) + printk(KERN_DEBUG "%s RX enabled\n", dev->name); } - aup->pDBfree = pDBfree; - /* attach a data buffer to each descriptor */ - for (i=0; i<NUM_IR_DESC; i++) { - pDB = GetFreeDB(aup); - if (!pDB) goto out; - aup->rx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff); - aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff); - aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff); - aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff); - aup->rx_db_inuse[i] = pDB; + return ret; +} + +static void update_rx_stats(struct net_device *dev, u32 status, u32 count) +{ + struct net_device_stats *ps = &dev->stats; + + ps->rx_packets++; + + if (status & IR_RX_ERROR) { + ps->rx_errors++; + if (status & (IR_PHY_ERROR | IR_FIFO_OVER)) + ps->rx_missed_errors++; + if (status & IR_MAX_LEN) + ps->rx_length_errors++; + if (status & IR_CRC_ERROR) + ps->rx_crc_errors++; + } else + ps->rx_bytes += count; +} + +static void update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len) +{ + struct net_device_stats *ps = &dev->stats; + + ps->tx_packets++; + ps->tx_bytes += pkt_len; + + if (status & IR_TX_ERROR) { + ps->tx_errors++; + ps->tx_aborted_errors++; } - for (i=0; i<NUM_IR_DESC; i++) { - pDB = GetFreeDB(aup); - if (!pDB) goto out; - aup->tx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff); - aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff); - aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff); - aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff); - aup->tx_ring[i]->count_0 = 0; - aup->tx_ring[i]->count_1 = 0; - aup->tx_ring[i]->flags = 0; - aup->tx_db_inuse[i] = pDB; +} + +static void au1k_tx_ack(struct net_device *dev) +{ + struct au1k_private *aup = netdev_priv(dev); + volatile struct ring_dest *ptxd; + + ptxd = aup->tx_ring[aup->tx_tail]; + while (!(ptxd->flags & AU_OWN) && (aup->tx_tail != aup->tx_head)) { + update_tx_stats(dev, ptxd->flags, + (ptxd->count_1 << 8) | ptxd->count_0); + ptxd->count_0 = 0; + ptxd->count_1 = 0; + wmb(); + aup->tx_tail = (aup->tx_tail + 1) & (NUM_IR_DESC - 1); + ptxd = aup->tx_ring[aup->tx_tail]; + + if (aup->tx_full) { + aup->tx_full = 0; + netif_wake_queue(dev); + } } -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - /* power on */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, - BCSR_RESETS_IRDA_MODE_FULL); -#endif + if (aup->tx_tail == aup->tx_head) { + if (aup->newspeed) { + au1k_irda_set_speed(dev, aup->newspeed); + aup->newspeed = 0; + } else { + irda_write(aup, IR_CONFIG_1, + irda_read(aup, IR_CONFIG_1) & ~IR_TX_ENABLE); + irda_write(aup, IR_CONFIG_1, + irda_read(aup, IR_CONFIG_1) | IR_RX_ENABLE); + irda_write(aup, IR_RING_PROMPT, 0); + } + } +} - return 0; +static int au1k_irda_rx(struct net_device *dev) +{ + struct au1k_private *aup = netdev_priv(dev); + volatile struct ring_dest *prxd; + struct sk_buff *skb; + struct db_dest *pDB; + u32 flags, count; -out3: - dma_free((void *)aup->rx_ring[0], - 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t))); -out2: - kfree(aup->rx_buff.head); -out1: - printk(KERN_ERR "au1k_init_module failed. Returns %d\n", retval); - return retval; + prxd = aup->rx_ring[aup->rx_head]; + flags = prxd->flags; + + while (!(flags & AU_OWN)) { + pDB = aup->rx_db_inuse[aup->rx_head]; + count = (prxd->count_1 << 8) | prxd->count_0; + if (!(flags & IR_RX_ERROR)) { + /* good frame */ + update_rx_stats(dev, flags, count); + skb = alloc_skb(count + 1, GFP_ATOMIC); + if (skb == NULL) { + dev->stats.rx_dropped++; + continue; + } + skb_reserve(skb, 1); + if (aup->speed == 4000000) + skb_put(skb, count); + else + skb_put(skb, count - 2); + skb_copy_to_linear_data(skb, (void *)pDB->vaddr, + count - 2); + skb->dev = dev; + skb_reset_mac_header(skb); + skb->protocol = htons(ETH_P_IRDA); + netif_rx(skb); + prxd->count_0 = 0; + prxd->count_1 = 0; + } + prxd->flags |= AU_OWN; + aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1); + irda_write(aup, IR_RING_PROMPT, 0); + + /* next descriptor */ + prxd = aup->rx_ring[aup->rx_head]; + flags = prxd->flags; + + } + return 0; } +static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id) +{ + struct net_device *dev = dev_id; + struct au1k_private *aup = netdev_priv(dev); + + irda_write(aup, IR_INT_CLEAR, 0); /* ack irda interrupts */ + + au1k_irda_rx(dev); + au1k_tx_ack(dev); + + return IRQ_HANDLED; +} static int au1k_init(struct net_device *dev) { struct au1k_private *aup = netdev_priv(dev); + u32 enable, ring_address; int i; - u32 control; - u32 ring_address; - /* bring the device out of reset */ - control = 0xe; /* coherent, clock enable, one half system clock */ - + enable = IR_HC | IR_CE | IR_C; #ifndef CONFIG_CPU_LITTLE_ENDIAN - control |= 1; + enable |= IR_BE; #endif aup->tx_head = 0; aup->tx_tail = 0; aup->rx_head = 0; - for (i=0; i<NUM_IR_DESC; i++) { + for (i = 0; i < NUM_IR_DESC; i++) aup->rx_ring[i]->flags = AU_OWN; - } - writel(control, IR_INTERFACE_CONFIG); - au_sync_delay(10); + irda_write(aup, IR_ENABLE, enable); + msleep(20); - writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE); /* disable PHY */ - au_sync_delay(1); + /* disable PHY */ + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF); + irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) & ~IR_PHYEN); + msleep(20); - writel(MAX_BUF_SIZE, IR_MAX_PKT_LEN); + irda_write(aup, IR_MAX_PKT_LEN, MAX_BUF_SIZE); ring_address = (u32)virt_to_phys((void *)aup->rx_ring[0]); - writel(ring_address >> 26, IR_RING_BASE_ADDR_H); - writel((ring_address >> 10) & 0xffff, IR_RING_BASE_ADDR_L); + irda_write(aup, IR_RING_BASE_ADDR_H, ring_address >> 26); + irda_write(aup, IR_RING_BASE_ADDR_L, (ring_address >> 10) & 0xffff); - writel(RING_SIZE_64<<8 | RING_SIZE_64<<12, IR_RING_SIZE); + irda_write(aup, IR_RING_SIZE, + (RING_SIZE_64 << 8) | (RING_SIZE_64 << 12)); - writel(1<<2 | IR_ONE_PIN, IR_CONFIG_2); /* 48MHz */ - writel(0, IR_RING_ADDR_CMPR); + irda_write(aup, IR_CONFIG_2, IR_PHYCLK_48MHZ | IR_ONE_PIN); + irda_write(aup, IR_RING_ADDR_CMPR, 0); au1k_irda_set_speed(dev, 9600); return 0; @@ -340,25 +555,28 @@ static int au1k_init(struct net_device *dev) static int au1k_irda_start(struct net_device *dev) { - int retval; - char hwname[32]; struct au1k_private *aup = netdev_priv(dev); + char hwname[32]; + int retval; - if ((retval = au1k_init(dev))) { + retval = au1k_init(dev); + if (retval) { printk(KERN_ERR "%s: error in au1k_init\n", dev->name); return retval; } - if ((retval = request_irq(AU1000_IRDA_TX_INT, au1k_irda_interrupt, - 0, dev->name, dev))) { - printk(KERN_ERR "%s: unable to get IRQ %d\n", + retval = request_irq(aup->irq_tx, &au1k_irda_interrupt, 0, + dev->name, dev); + if (retval) { + printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, dev->irq); return retval; } - if ((retval = request_irq(AU1000_IRDA_RX_INT, au1k_irda_interrupt, - 0, dev->name, dev))) { - free_irq(AU1000_IRDA_TX_INT, dev); - printk(KERN_ERR "%s: unable to get IRQ %d\n", + retval = request_irq(aup->irq_rx, &au1k_irda_interrupt, 0, + dev->name, dev); + if (retval) { + free_irq(aup->irq_tx, dev); + printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, dev->irq); return retval; } @@ -368,9 +586,13 @@ static int au1k_irda_start(struct net_device *dev) aup->irlap = irlap_open(dev, &aup->qos, hwname); netif_start_queue(dev); - writel(read_ir_reg(IR_CONFIG_2) | 1<<8, IR_CONFIG_2); /* int enable */ + /* int enable */ + irda_write(aup, IR_CONFIG_2, irda_read(aup, IR_CONFIG_2) | IR_IEN); + + /* power up */ + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_SIR); - aup->timer.expires = RUN_AT((3*HZ)); + aup->timer.expires = RUN_AT((3 * HZ)); aup->timer.data = (unsigned long)dev; return 0; } @@ -379,11 +601,12 @@ static int au1k_irda_stop(struct net_device *dev) { struct au1k_private *aup = netdev_priv(dev); + au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF); + /* disable interrupts */ - writel(read_ir_reg(IR_CONFIG_2) & ~(1<<8), IR_CONFIG_2); - writel(0, IR_CONFIG_1); - writel(0, IR_INTERFACE_CONFIG); /* disable clock */ - au_sync(); + irda_write(aup, IR_CONFIG_2, irda_read(aup, IR_CONFIG_2) & ~IR_IEN); + irda_write(aup, IR_CONFIG_1, 0); + irda_write(aup, IR_ENABLE, 0); /* disable clock */ if (aup->irlap) { irlap_close(aup->irlap); @@ -394,83 +617,12 @@ static int au1k_irda_stop(struct net_device *dev) del_timer(&aup->timer); /* disable the interrupt */ - free_irq(AU1000_IRDA_TX_INT, dev); - free_irq(AU1000_IRDA_RX_INT, dev); - return 0; -} - -static void __exit au1k_irda_exit(void) -{ - struct net_device *dev = ir_devs[0]; - struct au1k_private *aup = netdev_priv(dev); + free_irq(aup->irq_tx, dev); + free_irq(aup->irq_rx, dev); - unregister_netdev(dev); - - dma_free((void *)aup->db[0].vaddr, - MAX_BUF_SIZE * 2*NUM_IR_DESC); - dma_free((void *)aup->rx_ring[0], - 2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t))); - kfree(aup->rx_buff.head); - free_netdev(dev); -} - - -static inline void -update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len) -{ - struct au1k_private *aup = netdev_priv(dev); - struct net_device_stats *ps = &aup->stats; - - ps->tx_packets++; - ps->tx_bytes += pkt_len; - - if (status & IR_TX_ERROR) { - ps->tx_errors++; - ps->tx_aborted_errors++; - } -} - - -static void au1k_tx_ack(struct net_device *dev) -{ - struct au1k_private *aup = netdev_priv(dev); - volatile ring_dest_t *ptxd; - - ptxd = aup->tx_ring[aup->tx_tail]; - while (!(ptxd->flags & AU_OWN) && (aup->tx_tail != aup->tx_head)) { - update_tx_stats(dev, ptxd->flags, - ptxd->count_1<<8 | ptxd->count_0); - ptxd->count_0 = 0; - ptxd->count_1 = 0; - au_sync(); - - aup->tx_tail = (aup->tx_tail + 1) & (NUM_IR_DESC - 1); - ptxd = aup->tx_ring[aup->tx_tail]; - - if (aup->tx_full) { - aup->tx_full = 0; - netif_wake_queue(dev); - } - } - - if (aup->tx_tail == aup->tx_head) { - if (aup->newspeed) { - au1k_irda_set_speed(dev, aup->newspeed); - aup->newspeed = 0; - } - else { - writel(read_ir_reg(IR_CONFIG_1) & ~IR_TX_ENABLE, - IR_CONFIG_1); - au_sync(); - writel(read_ir_reg(IR_CONFIG_1) | IR_RX_ENABLE, - IR_CONFIG_1); - writel(0, IR_RING_PROMPT); - au_sync(); - } - } + return 0; } - /* * Au1000 transmit routine. */ @@ -478,15 +630,12 @@ static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) { struct au1k_private *aup = netdev_priv(dev); int speed = irda_get_next_speed(skb); - volatile ring_dest_t *ptxd; - u32 len; - - u32 flags; - db_dest_t *pDB; + volatile struct ring_dest *ptxd; + struct db_dest *pDB; + u32 len, flags; - if (speed != aup->speed && speed != -1) { + if (speed != aup->speed && speed != -1) aup->newspeed = speed; - } if ((skb->len == 0) && (aup->newspeed)) { if (aup->tx_tail == aup->tx_head) { @@ -504,138 +653,47 @@ static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) printk(KERN_DEBUG "%s: tx_full\n", dev->name); netif_stop_queue(dev); aup->tx_full = 1; - return NETDEV_TX_BUSY; - } - else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) { + return 1; + } else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) { printk(KERN_DEBUG "%s: tx_full\n", dev->name); netif_stop_queue(dev); aup->tx_full = 1; - return NETDEV_TX_BUSY; + return 1; } pDB = aup->tx_db_inuse[aup->tx_head]; #if 0 - if (read_ir_reg(IR_RX_BYTE_CNT) != 0) { - printk("tx warning: rx byte cnt %x\n", - read_ir_reg(IR_RX_BYTE_CNT)); + if (irda_read(aup, IR_RX_BYTE_CNT) != 0) { + printk(KERN_DEBUG "tx warning: rx byte cnt %x\n", + irda_read(aup, IR_RX_BYTE_CNT)); } #endif - + if (aup->speed == 4000000) { /* FIR */ - skb_copy_from_linear_data(skb, pDB->vaddr, skb->len); + skb_copy_from_linear_data(skb, (void *)pDB->vaddr, skb->len); ptxd->count_0 = skb->len & 0xff; ptxd->count_1 = (skb->len >> 8) & 0xff; - - } - else { + } else { /* SIR */ len = async_wrap_skb(skb, (u8 *)pDB->vaddr, MAX_BUF_SIZE); ptxd->count_0 = len & 0xff; ptxd->count_1 = (len >> 8) & 0xff; ptxd->flags |= IR_DIS_CRC; - au_writel(au_readl(0xae00000c) & ~(1<<13), 0xae00000c); } ptxd->flags |= AU_OWN; - au_sync(); + wmb(); - writel(read_ir_reg(IR_CONFIG_1) | IR_TX_ENABLE, IR_CONFIG_1); - writel(0, IR_RING_PROMPT); - au_sync(); + irda_write(aup, IR_CONFIG_1, + irda_read(aup, IR_CONFIG_1) | IR_TX_ENABLE); + irda_write(aup, IR_RING_PROMPT, 0); dev_kfree_skb(skb); aup->tx_head = (aup->tx_head + 1) & (NUM_IR_DESC - 1); return NETDEV_TX_OK; } - -static inline void -update_rx_stats(struct net_device *dev, u32 status, u32 count) -{ - struct au1k_private *aup = netdev_priv(dev); - struct net_device_stats *ps = &aup->stats; - - ps->rx_packets++; - - if (status & IR_RX_ERROR) { - ps->rx_errors++; - if (status & (IR_PHY_ERROR|IR_FIFO_OVER)) - ps->rx_missed_errors++; - if (status & IR_MAX_LEN) - ps->rx_length_errors++; - if (status & IR_CRC_ERROR) - ps->rx_crc_errors++; - } - else - ps->rx_bytes += count; -} - -/* - * Au1000 receive routine. - */ -static int au1k_irda_rx(struct net_device *dev) -{ - struct au1k_private *aup = netdev_priv(dev); - struct sk_buff *skb; - volatile ring_dest_t *prxd; - u32 flags, count; - db_dest_t *pDB; - - prxd = aup->rx_ring[aup->rx_head]; - flags = prxd->flags; - - while (!(flags & AU_OWN)) { - pDB = aup->rx_db_inuse[aup->rx_head]; - count = prxd->count_1<<8 | prxd->count_0; - if (!(flags & IR_RX_ERROR)) { - /* good frame */ - update_rx_stats(dev, flags, count); - skb=alloc_skb(count+1,GFP_ATOMIC); - if (skb == NULL) { - aup->netdev->stats.rx_dropped++; - continue; - } - skb_reserve(skb, 1); - if (aup->speed == 4000000) - skb_put(skb, count); - else - skb_put(skb, count-2); - skb_copy_to_linear_data(skb, pDB->vaddr, count - 2); - skb->dev = dev; - skb_reset_mac_header(skb); - skb->protocol = htons(ETH_P_IRDA); - netif_rx(skb); - prxd->count_0 = 0; - prxd->count_1 = 0; - } - prxd->flags |= AU_OWN; - aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1); - writel(0, IR_RING_PROMPT); - au_sync(); - - /* next descriptor */ - prxd = aup->rx_ring[aup->rx_head]; - flags = prxd->flags; - - } - return 0; -} - - -static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id) -{ - struct net_device *dev = dev_id; - - writel(0, IR_INT_CLEAR); /* ack irda interrupts */ - - au1k_irda_rx(dev); - au1k_tx_ack(dev); - - return IRQ_HANDLED; -} - - /* * The Tx ring has been full longer than the watchdog timeout * value. The transmitter must be hung? @@ -653,142 +711,7 @@ static void au1k_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } - -/* - * Set the IrDA communications speed. - */ -static int -au1k_irda_set_speed(struct net_device *dev, int speed) -{ - unsigned long flags; - struct au1k_private *aup = netdev_priv(dev); - u32 control; - int ret = 0, timeout = 10, i; - volatile ring_dest_t *ptxd; -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - unsigned long irda_resets; -#endif - - if (speed == aup->speed) - return ret; - - spin_lock_irqsave(&ir_lock, flags); - - /* disable PHY first */ - writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE); - - /* disable RX/TX */ - writel(read_ir_reg(IR_CONFIG_1) & ~(IR_RX_ENABLE|IR_TX_ENABLE), - IR_CONFIG_1); - au_sync_delay(1); - while (read_ir_reg(IR_ENABLE) & (IR_RX_STATUS | IR_TX_STATUS)) { - mdelay(1); - if (!timeout--) { - printk(KERN_ERR "%s: rx/tx disable timeout\n", - dev->name); - break; - } - } - - /* disable DMA */ - writel(read_ir_reg(IR_CONFIG_1) & ~IR_DMA_ENABLE, IR_CONFIG_1); - au_sync_delay(1); - - /* - * After we disable tx/rx. the index pointers - * go back to zero. - */ - aup->tx_head = aup->tx_tail = aup->rx_head = 0; - for (i=0; i<NUM_IR_DESC; i++) { - ptxd = aup->tx_ring[i]; - ptxd->flags = 0; - ptxd->count_0 = 0; - ptxd->count_1 = 0; - } - - for (i=0; i<NUM_IR_DESC; i++) { - ptxd = aup->rx_ring[i]; - ptxd->count_0 = 0; - ptxd->count_1 = 0; - ptxd->flags = AU_OWN; - } - - if (speed == 4000000) { -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL); -#else /* Pb1000 and Pb1100 */ - writel(1<<13, CPLD_AUX1); -#endif - } - else { -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0); -#else /* Pb1000 and Pb1100 */ - writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1); -#endif - } - - switch (speed) { - case 9600: - writel(11<<10 | 12<<5, IR_WRITE_PHY_CONFIG); - writel(IR_SIR_MODE, IR_CONFIG_1); - break; - case 19200: - writel(5<<10 | 12<<5, IR_WRITE_PHY_CONFIG); - writel(IR_SIR_MODE, IR_CONFIG_1); - break; - case 38400: - writel(2<<10 | 12<<5, IR_WRITE_PHY_CONFIG); - writel(IR_SIR_MODE, IR_CONFIG_1); - break; - case 57600: - writel(1<<10 | 12<<5, IR_WRITE_PHY_CONFIG); - writel(IR_SIR_MODE, IR_CONFIG_1); - break; - case 115200: - writel(12<<5, IR_WRITE_PHY_CONFIG); - writel(IR_SIR_MODE, IR_CONFIG_1); - break; - case 4000000: - writel(0xF, IR_WRITE_PHY_CONFIG); - writel(IR_FIR|IR_DMA_ENABLE|IR_RX_ENABLE, IR_CONFIG_1); - break; - default: - printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed); - ret = -EINVAL; - break; - } - - aup->speed = speed; - writel(read_ir_reg(IR_ENABLE) | 0x8000, IR_ENABLE); - au_sync(); - - control = read_ir_reg(IR_ENABLE); - writel(0, IR_RING_PROMPT); - au_sync(); - - if (control & (1<<14)) { - printk(KERN_ERR "%s: configuration error\n", dev->name); - } - else { - if (control & (1<<11)) - printk(KERN_DEBUG "%s Valid SIR config\n", dev->name); - if (control & (1<<12)) - printk(KERN_DEBUG "%s Valid MIR config\n", dev->name); - if (control & (1<<13)) - printk(KERN_DEBUG "%s Valid FIR config\n", dev->name); - if (control & (1<<10)) - printk(KERN_DEBUG "%s TX enabled\n", dev->name); - if (control & (1<<9)) - printk(KERN_DEBUG "%s RX enabled\n", dev->name); - } - - spin_unlock_irqrestore(&ir_lock, flags); - return ret; -} - -static int -au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) +static int au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) { struct if_irda_req *rq = (struct if_irda_req *)ifreq; struct au1k_private *aup = netdev_priv(dev); @@ -829,8 +752,218 @@ au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) return ret; } +static const struct net_device_ops au1k_irda_netdev_ops = { + .ndo_open = au1k_irda_start, + .ndo_stop = au1k_irda_stop, + .ndo_start_xmit = au1k_irda_hard_xmit, + .ndo_tx_timeout = au1k_tx_timeout, + .ndo_do_ioctl = au1k_irda_ioctl, +}; + +static int __devinit au1k_irda_net_init(struct net_device *dev) +{ + struct au1k_private *aup = netdev_priv(dev); + struct db_dest *pDB, *pDBfree; + int i, err, retval = 0; + dma_addr_t temp; + + err = au1k_irda_init_iobuf(&aup->rx_buff, 14384); + if (err) + goto out1; + + dev->netdev_ops = &au1k_irda_netdev_ops; + + irda_init_max_qos_capabilies(&aup->qos); + + /* The only value we must override it the baudrate */ + aup->qos.baud_rate.bits = IR_9600 | IR_19200 | IR_38400 | + IR_57600 | IR_115200 | IR_576000 | (IR_4000000 << 8); + + aup->qos.min_turn_time.bits = qos_mtt_bits; + irda_qos_bits_to_value(&aup->qos); + + retval = -ENOMEM; + + /* Tx ring follows rx ring + 512 bytes */ + /* we need a 1k aligned buffer */ + aup->rx_ring[0] = (struct ring_dest *) + dma_alloc(2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest)), + &temp); + if (!aup->rx_ring[0]) + goto out2; + + /* allocate the data buffers */ + aup->db[0].vaddr = + (void *)dma_alloc(MAX_BUF_SIZE * 2 * NUM_IR_DESC, &temp); + if (!aup->db[0].vaddr) + goto out3; + + setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512); + + pDBfree = NULL; + pDB = aup->db; + for (i = 0; i < (2 * NUM_IR_DESC); i++) { + pDB->pnext = pDBfree; + pDBfree = pDB; + pDB->vaddr = + (u32 *)((unsigned)aup->db[0].vaddr + (MAX_BUF_SIZE * i)); + pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr); + pDB++; + } + aup->pDBfree = pDBfree; + + /* attach a data buffer to each descriptor */ + for (i = 0; i < NUM_IR_DESC; i++) { + pDB = GetFreeDB(aup); + if (!pDB) + goto out3; + aup->rx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff); + aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr >> 8) & 0xff); + aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr >> 16) & 0xff); + aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr >> 24) & 0xff); + aup->rx_db_inuse[i] = pDB; + } + for (i = 0; i < NUM_IR_DESC; i++) { + pDB = GetFreeDB(aup); + if (!pDB) + goto out3; + aup->tx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff); + aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr >> 8) & 0xff); + aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr >> 16) & 0xff); + aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr >> 24) & 0xff); + aup->tx_ring[i]->count_0 = 0; + aup->tx_ring[i]->count_1 = 0; + aup->tx_ring[i]->flags = 0; + aup->tx_db_inuse[i] = pDB; + } + + return 0; + +out3: + dma_free((void *)aup->rx_ring[0], + 2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest))); +out2: + kfree(aup->rx_buff.head); +out1: + printk(KERN_ERR "au1k_irda_net_init() failed. Returns %d\n", retval); + return retval; +} + +static int __devinit au1k_irda_probe(struct platform_device *pdev) +{ + struct au1k_private *aup; + struct net_device *dev; + struct resource *r; + int err; + + dev = alloc_irdadev(sizeof(struct au1k_private)); + if (!dev) + return -ENOMEM; + + aup = netdev_priv(dev); + + aup->platdata = pdev->dev.platform_data; + + err = -EINVAL; + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!r) + goto out; + + aup->irq_tx = r->start; + + r = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + if (!r) + goto out; + + aup->irq_rx = r->start; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + goto out; + + err = -EBUSY; + aup->ioarea = request_mem_region(r->start, r->end - r->start + 1, + pdev->name); + if (!aup->ioarea) + goto out; + + aup->iobase = ioremap_nocache(r->start, r->end - r->start + 1); + if (!aup->iobase) + goto out2; + + dev->irq = aup->irq_rx; + + err = au1k_irda_net_init(dev); + if (err) + goto out3; + err = register_netdev(dev); + if (err) + goto out4; + + platform_set_drvdata(pdev, dev); + + printk(KERN_INFO "IrDA: Registered device %s\n", dev->name); + return 0; + +out4: + dma_free((void *)aup->db[0].vaddr, + MAX_BUF_SIZE * 2 * NUM_IR_DESC); + dma_free((void *)aup->rx_ring[0], + 2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest))); + kfree(aup->rx_buff.head); +out3: + iounmap(aup->iobase); +out2: + release_resource(aup->ioarea); + kfree(aup->ioarea); +out: + free_netdev(dev); + return err; +} + +static int __devexit au1k_irda_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct au1k_private *aup = netdev_priv(dev); + + unregister_netdev(dev); + + dma_free((void *)aup->db[0].vaddr, + MAX_BUF_SIZE * 2 * NUM_IR_DESC); + dma_free((void *)aup->rx_ring[0], + 2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest))); + kfree(aup->rx_buff.head); + + iounmap(aup->iobase); + release_resource(aup->ioarea); + kfree(aup->ioarea); + + free_netdev(dev); + + return 0; +} + +static struct platform_driver au1k_irda_driver = { + .driver = { + .name = "au1000-irda", + .owner = THIS_MODULE, + }, + .probe = au1k_irda_probe, + .remove = __devexit_p(au1k_irda_remove), +}; + +static int __init au1k_irda_load(void) +{ + return platform_driver_register(&au1k_irda_driver); +} + +static void __exit au1k_irda_unload(void) +{ + return platform_driver_unregister(&au1k_irda_driver); +} + MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>"); MODULE_DESCRIPTION("Au1000 IrDA Device Driver"); -module_init(au1k_irda_init); -module_exit(au1k_irda_exit); +module_init(au1k_irda_load); +module_exit(au1k_irda_unload); diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 6e318ce..f9e3fb3 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -155,18 +155,14 @@ config PCMCIA_M8XX This driver is also available as a module called m8xx_pcmcia. -config PCMCIA_AU1X00 - tristate "Au1x00 pcmcia support" - depends on MIPS_ALCHEMY && PCMCIA - config PCMCIA_ALCHEMY_DEVBOARD tristate "Alchemy Db/Pb1xxx PCMCIA socket services" depends on MIPS_ALCHEMY && PCMCIA select 64BIT_PHYS_ADDR help Enable this driver of you want PCMCIA support on your Alchemy - Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board. - NOT suitable for the PB1000! + Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300 + board. NOT suitable for the PB1000! This driver is also available as a module called db1xxx_ss.ko diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 29935ea..ec543a4 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_base.o sa1100_cs.o obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_base.o sa1111_cs.o obj-$(CONFIG_M32R_PCC) += m32r_pcc.o obj-$(CONFIG_M32R_CFC) += m32r_cfc.o -obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o @@ -39,9 +38,6 @@ obj-$(CONFIG_AT91_CF) += at91_cf.o obj-$(CONFIG_ELECTRA_CF) += electra_cf.o obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o -au1x00_ss-y += au1000_generic.o -au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o - sa1111_cs-y += sa1111_generic.o sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1100_neponset.o sa1111_cs-$(CONFIG_SA1100_BADGE4) += sa1100_badge4.o diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c deleted file mode 100644 index 95dd7c6..0000000 --- a/drivers/pcmcia/au1000_generic.c +++ /dev/null @@ -1,545 +0,0 @@ -/* - * - * Alchemy Semi Au1000 pcmcia driver - * - * Copyright 2001-2003 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@embeddedalley.com or source@mvista.com - * - * Copyright 2004 Pete Popov, Embedded Alley Solutions, Inc. - * Updated the driver to 2.6. Followed the sa11xx API and largely - * copied many of the hardware independent functions. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/ioport.h> -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/notifier.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/mutex.h> -#include <linux/platform_device.h> -#include <linux/slab.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> - -#include <asm/mach-au1x00/au1000.h> -#include "au1000_generic.h" - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Pete Popov <ppopov@embeddedalley.com>"); -MODULE_DESCRIPTION("Linux PCMCIA Card Services: Au1x00 Socket Controller"); - -#if 0 -#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args) -#else -#define debug(x,args...) -#endif - -#define MAP_SIZE 0x100000 -extern struct au1000_pcmcia_socket au1000_pcmcia_socket[]; -#define PCMCIA_SOCKET(x) (au1000_pcmcia_socket + (x)) -#define to_au1000_socket(x) container_of(x, struct au1000_pcmcia_socket, socket) - -/* Some boards like to support CF cards as IDE root devices, so they - * grab pcmcia sockets directly. - */ -u32 *pcmcia_base_vaddrs[2]; -extern const unsigned long mips_io_port_base; - -static DEFINE_MUTEX(pcmcia_sockets_lock); - -static int (*au1x00_pcmcia_hw_init[])(struct device *dev) = { - au1x_board_init, -}; - -static int -au1x00_pcmcia_skt_state(struct au1000_pcmcia_socket *skt) -{ - struct pcmcia_state state; - unsigned int stat; - - memset(&state, 0, sizeof(struct pcmcia_state)); - - skt->ops->socket_state(skt, &state); - - stat = state.detect ? SS_DETECT : 0; - stat |= state.ready ? SS_READY : 0; - stat |= state.wrprot ? SS_WRPROT : 0; - stat |= state.vs_3v ? SS_3VCARD : 0; - stat |= state.vs_Xv ? SS_XVCARD : 0; - stat |= skt->cs_state.Vcc ? SS_POWERON : 0; - - if (skt->cs_state.flags & SS_IOCARD) - stat |= state.bvd1 ? SS_STSCHG : 0; - else { - if (state.bvd1 == 0) - stat |= SS_BATDEAD; - else if (state.bvd2 == 0) - stat |= SS_BATWARN; - } - return stat; -} - -/* - * au100_pcmcia_config_skt - * - * Convert PCMCIA socket state to our socket configure structure. - */ -static int -au1x00_pcmcia_config_skt(struct au1000_pcmcia_socket *skt, socket_state_t *state) -{ - int ret; - - ret = skt->ops->configure_socket(skt, state); - if (ret == 0) { - skt->cs_state = *state; - } - - if (ret < 0) - debug("unable to configure socket %d\n", skt->nr); - - return ret; -} - -/* au1x00_pcmcia_sock_init() - * - * (Re-)Initialise the socket, turning on status interrupts - * and PCMCIA bus. This must wait for power to stabilise - * so that the card status signals report correctly. - * - * Returns: 0 - */ -static int au1x00_pcmcia_sock_init(struct pcmcia_socket *sock) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - - debug("initializing socket %u\n", skt->nr); - - skt->ops->socket_init(skt); - return 0; -} - -/* - * au1x00_pcmcia_suspend() - * - * Remove power on the socket, disable IRQs from the card. - * Turn off status interrupts, and disable the PCMCIA bus. - * - * Returns: 0 - */ -static int au1x00_pcmcia_suspend(struct pcmcia_socket *sock) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - - debug("suspending socket %u\n", skt->nr); - - skt->ops->socket_suspend(skt); - - return 0; -} - -static DEFINE_SPINLOCK(status_lock); - -/* - * au1x00_check_status() - */ -static void au1x00_check_status(struct au1000_pcmcia_socket *skt) -{ - unsigned int events; - - debug("entering PCMCIA monitoring thread\n"); - - do { - unsigned int status; - unsigned long flags; - - status = au1x00_pcmcia_skt_state(skt); - - spin_lock_irqsave(&status_lock, flags); - events = (status ^ skt->status) & skt->cs_state.csc_mask; - skt->status = status; - spin_unlock_irqrestore(&status_lock, flags); - - debug("events: %s%s%s%s%s%s\n", - events == 0 ? "<NONE>" : "", - events & SS_DETECT ? "DETECT " : "", - events & SS_READY ? "READY " : "", - events & SS_BATDEAD ? "BATDEAD " : "", - events & SS_BATWARN ? "BATWARN " : "", - events & SS_STSCHG ? "STSCHG " : ""); - - if (events) - pcmcia_parse_events(&skt->socket, events); - } while (events); -} - -/* - * au1x00_pcmcia_poll_event() - * Let's poll for events in addition to IRQs since IRQ only is unreliable... - */ -static void au1x00_pcmcia_poll_event(unsigned long dummy) -{ - struct au1000_pcmcia_socket *skt = (struct au1000_pcmcia_socket *)dummy; - debug("polling for events\n"); - - mod_timer(&skt->poll_timer, jiffies + AU1000_PCMCIA_POLL_PERIOD); - - au1x00_check_status(skt); -} - -/* au1x00_pcmcia_get_status() - * - * From the sa11xx_core.c: - * Implements the get_status() operation for the in-kernel PCMCIA - * service (formerly SS_GetStatus in Card Services). Essentially just - * fills in bits in `status' according to internal driver state or - * the value of the voltage detect chipselect register. - * - * As a debugging note, during card startup, the PCMCIA core issues - * three set_socket() commands in a row the first with RESET deasserted, - * the second with RESET asserted, and the last with RESET deasserted - * again. Following the third set_socket(), a get_status() command will - * be issued. The kernel is looking for the SS_READY flag (see - * setup_socket(), reset_socket(), and unreset_socket() in cs.c). - * - * Returns: 0 - */ -static int -au1x00_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - - skt->status = au1x00_pcmcia_skt_state(skt); - *status = skt->status; - - return 0; -} - -/* au1x00_pcmcia_set_socket() - * Implements the set_socket() operation for the in-kernel PCMCIA - * service (formerly SS_SetSocket in Card Services). We more or - * less punt all of this work and let the kernel handle the details - * of power configuration, reset, &c. We also record the value of - * `state' in order to regurgitate it to the PCMCIA core later. - * - * Returns: 0 - */ -static int -au1x00_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - - debug("for sock %u\n", skt->nr); - - debug("\tmask: %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n", - (state->csc_mask==0)?"<NONE>":"", - (state->csc_mask&SS_DETECT)?"DETECT ":"", - (state->csc_mask&SS_READY)?"READY ":"", - (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"", - (state->csc_mask&SS_BATWARN)?"BATWARN ":"", - (state->csc_mask&SS_STSCHG)?"STSCHG ":"", - (state->flags==0)?"<NONE>":"", - (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"", - (state->flags&SS_IOCARD)?"IOCARD ":"", - (state->flags&SS_RESET)?"RESET ":"", - (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"", - (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":""); - debug("\tVcc %d Vpp %d irq %d\n", - state->Vcc, state->Vpp, state->io_irq); - - return au1x00_pcmcia_config_skt(skt, state); -} - -int -au1x00_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - unsigned int speed; - - if(map->map>=MAX_IO_WIN){ - debug("map (%d) out of range\n", map->map); - return -1; - } - - if(map->flags&MAP_ACTIVE){ - speed=(map->speed>0)?map->speed:AU1000_PCMCIA_IO_SPEED; - skt->spd_io[map->map] = speed; - } - - map->start=(unsigned int)(u32)skt->virt_io; - map->stop=map->start+MAP_SIZE; - return 0; - -} /* au1x00_pcmcia_set_io_map() */ - - -static int -au1x00_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map) -{ - struct au1000_pcmcia_socket *skt = to_au1000_socket(sock); - unsigned short speed = map->speed; - - if(map->map>=MAX_WIN){ - debug("map (%d) out of range\n", map->map); - return -1; - } - - if (map->flags & MAP_ATTRIB) { - skt->spd_attr[map->map] = speed; - skt->spd_mem[map->map] = 0; - } else { - skt->spd_attr[map->map] = 0; - skt->spd_mem[map->map] = speed; - } - - if (map->flags & MAP_ATTRIB) { - map->static_start = skt->phys_attr + map->card_start; - } - else { - map->static_start = skt->phys_mem + map->card_start; - } - - debug("set_mem_map %d start %08lx card_start %08x\n", - map->map, map->static_start, map->card_start); - return 0; - -} /* au1x00_pcmcia_set_mem_map() */ - -static struct pccard_operations au1x00_pcmcia_operations = { - .init = au1x00_pcmcia_sock_init, - .suspend = au1x00_pcmcia_suspend, - .get_status = au1x00_pcmcia_get_status, - .set_socket = au1x00_pcmcia_set_socket, - .set_io_map = au1x00_pcmcia_set_io_map, - .set_mem_map = au1x00_pcmcia_set_mem_map, -}; - -static const char *skt_names[] = { - "PCMCIA socket 0", - "PCMCIA socket 1", -}; - -struct skt_dev_info { - int nskt; -}; - -int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr) -{ - struct skt_dev_info *sinfo; - struct au1000_pcmcia_socket *skt; - int ret, i; - - sinfo = kzalloc(sizeof(struct skt_dev_info), GFP_KERNEL); - if (!sinfo) { - ret = -ENOMEM; - goto out; - } - - sinfo->nskt = nr; - - /* - * Initialise the per-socket structure. - */ - for (i = 0; i < nr; i++) { - skt = PCMCIA_SOCKET(i); - memset(skt, 0, sizeof(*skt)); - - skt->socket.resource_ops = &pccard_static_ops; - skt->socket.ops = &au1x00_pcmcia_operations; - skt->socket.owner = ops->owner; - skt->socket.dev.parent = dev; - - init_timer(&skt->poll_timer); - skt->poll_timer.function = au1x00_pcmcia_poll_event; - skt->poll_timer.data = (unsigned long)skt; - skt->poll_timer.expires = jiffies + AU1000_PCMCIA_POLL_PERIOD; - - skt->nr = first + i; - skt->irq = 255; - skt->dev = dev; - skt->ops = ops; - - skt->res_skt.name = skt_names[skt->nr]; - skt->res_io.name = "io"; - skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY; - skt->res_mem.name = "memory"; - skt->res_mem.flags = IORESOURCE_MEM; - skt->res_attr.name = "attribute"; - skt->res_attr.flags = IORESOURCE_MEM; - - /* - * PCMCIA client drivers use the inb/outb macros to access the - * IO registers. Since mips_io_port_base is added to the - * access address of the mips implementation of inb/outb, - * we need to subtract it here because we want to access the - * I/O or MEM address directly, without going through this - * "mips_io_port_base" mechanism. - */ - if (i == 0) { - skt->virt_io = (void *) - (ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) - - (u32)mips_io_port_base); - skt->phys_attr = AU1X_SOCK0_PHYS_ATTR; - skt->phys_mem = AU1X_SOCK0_PHYS_MEM; - } - else { - skt->virt_io = (void *) - (ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) - - (u32)mips_io_port_base); - skt->phys_attr = AU1X_SOCK1_PHYS_ATTR; - skt->phys_mem = AU1X_SOCK1_PHYS_MEM; - } - pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io; - ret = ops->hw_init(skt); - - skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD; - skt->socket.irq_mask = 0; - skt->socket.map_size = MAP_SIZE; - skt->socket.pci_irq = skt->irq; - skt->socket.io_offset = (unsigned long)skt->virt_io; - - skt->status = au1x00_pcmcia_skt_state(skt); - - ret = pcmcia_register_socket(&skt->socket); - if (ret) - goto out_err; - - WARN_ON(skt->socket.sock != i); - - add_timer(&skt->poll_timer); - } - - dev_set_drvdata(dev, sinfo); - return 0; - - -out_err: - ops->hw_shutdown(skt); - while (i-- > 0) { - skt = PCMCIA_SOCKET(i); - - del_timer_sync(&skt->poll_timer); - pcmcia_unregister_socket(&skt->socket); - if (i == 0) { - iounmap(skt->virt_io + (u32)mips_io_port_base); - skt->virt_io = NULL; - } -#ifndef CONFIG_MIPS_XXS1500 - else { - iounmap(skt->virt_io + (u32)mips_io_port_base); - skt->virt_io = NULL; - } -#endif - ops->hw_shutdown(skt); - - } - kfree(sinfo); -out: - return ret; -} - -int au1x00_drv_pcmcia_remove(struct platform_device *dev) -{ - struct skt_dev_info *sinfo = platform_get_drvdata(dev); - int i; - - mutex_lock(&pcmcia_sockets_lock); - platform_set_drvdata(dev, NULL); - - for (i = 0; i < sinfo->nskt; i++) { - struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i); - - del_timer_sync(&skt->poll_timer); - pcmcia_unregister_socket(&skt->socket); - skt->ops->hw_shutdown(skt); - au1x00_pcmcia_config_skt(skt, &dead_socket); - iounmap(skt->virt_io + (u32)mips_io_port_base); - skt->virt_io = NULL; - } - - kfree(sinfo); - mutex_unlock(&pcmcia_sockets_lock); - return 0; -} - - -/* - * PCMCIA "Driver" API - */ - -static int au1x00_drv_pcmcia_probe(struct platform_device *dev) -{ - int i, ret = -ENODEV; - - mutex_lock(&pcmcia_sockets_lock); - for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) { - ret = au1x00_pcmcia_hw_init[i](&dev->dev); - if (ret == 0) - break; - } - mutex_unlock(&pcmcia_sockets_lock); - return ret; -} - -static struct platform_driver au1x00_pcmcia_driver = { - .driver = { - .name = "au1x00-pcmcia", - .owner = THIS_MODULE, - }, - .probe = au1x00_drv_pcmcia_probe, - .remove = au1x00_drv_pcmcia_remove, -}; - - -/* au1x00_pcmcia_init() - * - * This routine performs low-level PCMCIA initialization and then - * registers this socket driver with Card Services. - * - * Returns: 0 on success, -ve error code on failure - */ -static int __init au1x00_pcmcia_init(void) -{ - int error = 0; - error = platform_driver_register(&au1x00_pcmcia_driver); - return error; -} - -/* au1x00_pcmcia_exit() - * Invokes the low-level kernel service to free IRQs associated with this - * socket controller and reset GPIO edge detection. - */ -static void __exit au1x00_pcmcia_exit(void) -{ - platform_driver_unregister(&au1x00_pcmcia_driver); -} - -module_init(au1x00_pcmcia_init); -module_exit(au1x00_pcmcia_exit); diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h deleted file mode 100644 index 5c36bda..0000000 --- a/drivers/pcmcia/au1000_generic.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Alchemy Semi Au1000 pcmcia driver include file - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#ifndef __ASM_AU1000_PCMCIA_H -#define __ASM_AU1000_PCMCIA_H - -/* include the world */ - -#include <pcmcia/ss.h> -#include <pcmcia/cistpl.h> -#include "cs_internal.h" - -#define AU1000_PCMCIA_POLL_PERIOD (2*HZ) -#define AU1000_PCMCIA_IO_SPEED (255) -#define AU1000_PCMCIA_MEM_SPEED (300) - -#define AU1X_SOCK0_IO 0xF00000000ULL -#define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL -#define AU1X_SOCK0_PHYS_MEM 0xF80000000ULL - -/* pcmcia socket 1 needs external glue logic so the memory map - * differs from board to board. - */ -#if defined(CONFIG_MIPS_PB1000) -#define AU1X_SOCK1_IO 0xF08000000ULL -#define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL -#define AU1X_SOCK1_PHYS_MEM 0xF88000000ULL -#endif - -struct pcmcia_state { - unsigned detect: 1, - ready: 1, - wrprot: 1, - bvd1: 1, - bvd2: 1, - vs_3v: 1, - vs_Xv: 1; -}; - -struct pcmcia_configure { - unsigned sock: 8, - vcc: 8, - vpp: 8, - output: 1, - speaker: 1, - reset: 1; -}; - -struct pcmcia_irqs { - int sock; - int irq; - const char *str; -}; - - -struct au1000_pcmcia_socket { - struct pcmcia_socket socket; - - /* - * Info from low level handler - */ - struct device *dev; - unsigned int nr; - unsigned int irq; - - /* - * Core PCMCIA state - */ - struct pcmcia_low_level *ops; - - unsigned int status; - socket_state_t cs_state; - - unsigned short spd_io[MAX_IO_WIN]; - unsigned short spd_mem[MAX_WIN]; - unsigned short spd_attr[MAX_WIN]; - - struct resource res_skt; - struct resource res_io; - struct resource res_mem; - struct resource res_attr; - - void * virt_io; - unsigned int phys_io; - unsigned int phys_attr; - unsigned int phys_mem; - unsigned short speed_io, speed_attr, speed_mem; - - unsigned int irq_state; - - struct timer_list poll_timer; -}; - -struct pcmcia_low_level { - struct module *owner; - - int (*hw_init)(struct au1000_pcmcia_socket *); - void (*hw_shutdown)(struct au1000_pcmcia_socket *); - - void (*socket_state)(struct au1000_pcmcia_socket *, struct pcmcia_state *); - int (*configure_socket)(struct au1000_pcmcia_socket *, struct socket_state_t *); - - /* - * Enable card status IRQs on (re-)initialisation. This can - * be called at initialisation, power management event, or - * pcmcia event. - */ - void (*socket_init)(struct au1000_pcmcia_socket *); - - /* - * Disable card status IRQs and PCMCIA bus on suspend. - */ - void (*socket_suspend)(struct au1000_pcmcia_socket *); -}; - -extern int au1x_board_init(struct device *dev); - -#endif /* __ASM_AU1000_PCMCIA_H */ diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c deleted file mode 100644 index b239664..0000000 --- a/drivers/pcmcia/au1000_pb1x00.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * - * Alchemy Semi Pb1000 boards specific pcmcia routines. - * - * Copyright 2002 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/proc_fs.h> -#include <linux/types.h> - -#include <pcmcia/ss.h> -#include <pcmcia/cistpl.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> - -#include <asm/au1000.h> -#include <asm/au1000_pcmcia.h> - -#define debug(fmt, arg...) do { } while (0) - -#include <asm/pb1000.h> -#define PCMCIA_IRQ AU1000_GPIO_15 - -static int pb1x00_pcmcia_init(struct pcmcia_init *init) -{ - u16 pcr; - pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; - - au_writel(0x8000, PB1000_MDR); /* clear pcmcia interrupt */ - au_sync_delay(100); - au_writel(0x4000, PB1000_MDR); /* enable pcmcia interrupt */ - au_sync(); - - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0); - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1); - au_writel(pcr, PB1000_PCR); - au_sync_delay(20); - - return PCMCIA_NUM_SOCKS; -} - -static int pb1x00_pcmcia_shutdown(void) -{ - u16 pcr; - pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0); - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1); - au_writel(pcr, PB1000_PCR); - au_sync_delay(20); - return 0; -} - -static int -pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) -{ - u32 inserted0, inserted1; - u16 vs0, vs1; - - vs0 = vs1 = (u16)au_readl(PB1000_ACR1); - inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2)); - inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2)); - vs0 = (vs0 >> 4) & 0x3; - vs1 = (vs1 >> 12) & 0x3; - - state->ready = 0; - state->vs_Xv = 0; - state->vs_3v = 0; - state->detect = 0; - - if (sock == 0) { - if (inserted0) { - switch (vs0) { - case 0: - case 2: - state->vs_3v=1; - break; - case 3: /* 5V */ - break; - default: - /* return without setting 'detect' */ - printk(KERN_ERR "pb1x00 bad VS (%d)\n", - vs0); - return 0; - } - state->detect = 1; - } - } - else { - if (inserted1) { - switch (vs1) { - case 0: - case 2: - state->vs_3v=1; - break; - case 3: /* 5V */ - break; - default: - /* return without setting 'detect' */ - printk(KERN_ERR "pb1x00 bad VS (%d)\n", - vs1); - return 0; - } - state->detect = 1; - } - } - - if (state->detect) { - state->ready = 1; - } - - state->bvd1=1; - state->bvd2=1; - state->wrprot=0; - return 1; -} - - -static int pb1x00_pcmcia_get_irq_info(struct pcmcia_irq_info *info) -{ - - if(info->sock > PCMCIA_MAX_SOCK) return -1; - - /* - * Even in the case of the Pb1000, both sockets are connected - * to the same irq line. - */ - info->irq = PCMCIA_IRQ; - - return 0; -} - - -static int -pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure) -{ - u16 pcr; - - if(configure->sock > PCMCIA_MAX_SOCK) return -1; - - pcr = au_readl(PB1000_PCR); - - if (configure->sock == 0) { - pcr &= ~(PCR_SLOT_0_VCC0 | PCR_SLOT_0_VCC1 | - PCR_SLOT_0_VPP0 | PCR_SLOT_0_VPP1); - } - else { - pcr &= ~(PCR_SLOT_1_VCC0 | PCR_SLOT_1_VCC1 | - PCR_SLOT_1_VPP0 | PCR_SLOT_1_VPP1); - } - - pcr &= ~PCR_SLOT_0_RST; - debug("Vcc %dV Vpp %dV, pcr %x\n", - configure->vcc, configure->vpp, pcr); - switch(configure->vcc){ - case 0: /* Vcc 0 */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_GND, - configure->sock); - break; - case 12: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_12V, - configure->sock); - break; - case 50: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_5V, - configure->sock); - break; - case 33: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_3V, - configure->sock); - break; - default: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ, - configure->sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - case 50: /* Vcc 5V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(VCC_5V,VPP_GND, - configure->sock); - break; - case 50: - pcr |= SET_VCC_VPP(VCC_5V,VPP_5V, - configure->sock); - break; - case 12: - pcr |= SET_VCC_VPP(VCC_5V,VPP_12V, - configure->sock); - break; - case 33: - pcr |= SET_VCC_VPP(VCC_5V,VPP_3V, - configure->sock); - break; - default: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ, - configure->sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - case 33: /* Vcc 3.3V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(VCC_3V,VPP_GND, - configure->sock); - break; - case 50: - pcr |= SET_VCC_VPP(VCC_3V,VPP_5V, - configure->sock); - break; - case 12: - pcr |= SET_VCC_VPP(VCC_3V,VPP_12V, - configure->sock); - break; - case 33: - pcr |= SET_VCC_VPP(VCC_3V,VPP_3V, - configure->sock); - break; - default: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ, - configure->sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - default: /* what's this ? */ - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock); - printk(KERN_ERR "%s: bad Vcc %d\n", - __func__, configure->vcc); - break; - } - - if (configure->sock == 0) { - pcr &= ~(PCR_SLOT_0_RST); - if (configure->reset) - pcr |= PCR_SLOT_0_RST; - } - else { - pcr &= ~(PCR_SLOT_1_RST); - if (configure->reset) - pcr |= PCR_SLOT_1_RST; - } - au_writel(pcr, PB1000_PCR); - au_sync_delay(300); - - return 0; -} - - -struct pcmcia_low_level pb1x00_pcmcia_ops = { - pb1x00_pcmcia_init, - pb1x00_pcmcia_shutdown, - pb1x00_pcmcia_socket_state, - pb1x00_pcmcia_get_irq_info, - pb1x00_pcmcia_configure_socket -}; diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c index 3e49df6..5b7c227 100644 --- a/drivers/pcmcia/db1xxx_ss.c +++ b/drivers/pcmcia/db1xxx_ss.c @@ -7,7 +7,7 @@ /* This is a fairly generic PCMCIA socket driver suitable for the * following Alchemy Development boards: - * Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200. + * Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200, Db1300 * * The Db1000 is used as a reference: Per-socket card-, carddetect- and * statuschange IRQs connected to SoC GPIOs, control and status register @@ -18,6 +18,7 @@ * - Pb1100/Pb1500: single socket only; voltage key bits VS are * at STATUS[5:4] (instead of STATUS[1:0]). * - Au1200-based: additional card-eject irqs, irqs not gpios! + * - Db1300: Db1200-like, no pwr ctrl, single socket (#1). */ #include <linux/delay.h> @@ -59,11 +60,17 @@ struct db1x_pcmcia_sock { #define BOARD_TYPE_DEFAULT 0 /* most boards */ #define BOARD_TYPE_DB1200 1 /* IRQs aren't gpios */ #define BOARD_TYPE_PB1100 2 /* VS bits slightly different */ +#define BOARD_TYPE_DB1300 3 /* no power control */ int board_type; }; #define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket) +static int db1300_card_inserted(struct db1x_pcmcia_sock *sock) +{ + return bcsr_read(BCSR_SIGSTAT) & (1 << 8); +} + /* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */ static int db1200_card_inserted(struct db1x_pcmcia_sock *sock) { @@ -84,6 +91,8 @@ static int db1x_card_inserted(struct db1x_pcmcia_sock *sock) switch (sock->board_type) { case BOARD_TYPE_DB1200: return db1200_card_inserted(sock); + case BOARD_TYPE_DB1300: + return db1300_card_inserted(sock); default: return db1000_card_inserted(sock); } @@ -160,7 +169,8 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) * ejection handler have been registered and the currently * active one disabled. */ - if (sock->board_type == BOARD_TYPE_DB1200) { + if ((sock->board_type == BOARD_TYPE_DB1200) || + (sock->board_type == BOARD_TYPE_DB1300)) { ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq, IRQF_DISABLED, "pcmcia_insert", sock); if (ret) @@ -174,7 +184,7 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) } /* enable the currently silent one */ - if (db1200_card_inserted(sock)) + if (db1x_card_inserted(sock)) enable_irq(sock->eject_irq); else enable_irq(sock->insert_irq); @@ -270,7 +280,8 @@ static int db1x_pcmcia_configure(struct pcmcia_socket *skt, } /* create new voltage code */ - cr_set |= ((v << 2) | p) << (sock->nr * 8); + if (sock->board_type != BOARD_TYPE_DB1300) + cr_set |= ((v << 2) | p) << (sock->nr * 8); changed = state->flags ^ sock->old_flags; @@ -343,6 +354,10 @@ static int db1x_pcmcia_get_status(struct pcmcia_socket *skt, /* if Vcc is not zero, we have applied power to a card */ status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0; + /* DB1300: power always on, but don't tell when no card present */ + if ((sock->board_type == BOARD_TYPE_DB1300) && (status & SS_DETECT)) + status = SS_POWERON | SS_3VCARD | SS_DETECT; + /* reset de-asserted? then we're ready */ status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET; @@ -419,6 +434,9 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev) case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200: sock->board_type = BOARD_TYPE_DB1200; break; + case BCSR_WHOAMI_DB1300: + sock->board_type = BOARD_TYPE_DB1300; + break; default: printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid); ret = -ENODEV; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a1fd73d..369e092 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -87,12 +87,12 @@ config SPI_BFIN_SPORT Enable support for a SPI bus via the Blackfin SPORT peripheral. config SPI_AU1550 - tristate "Au1550/Au12x0 SPI Controller" + tristate "Au1550/Au1200/Au1300 SPI Controller" depends on MIPS_ALCHEMY && EXPERIMENTAL select SPI_BITBANG help If you say yes to this option, support will be included for the - Au1550 SPI controller (may also work with Au1200,Au1210,Au1250). + PSC SPI controller found on Au1550, Au1200 and Au1300 series. config SPI_BITBANG tristate "Utilities for Bitbanging SPI masters" diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c index b4192c9..936af83 100644 --- a/drivers/usb/host/alchemy-common.c +++ b/drivers/usb/host/alchemy-common.c @@ -52,9 +52,263 @@ USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \ USBCFG_OME) +/* Au1300 USB config registers */ +#define USB_DWC_CTRL1 0x00 +#define USB_DWC_CTRL2 0x04 +#define USB_VBUS_TIMER 0x10 +#define USB_SBUS_CTRL 0x14 +#define USB_MSR_ERR 0x18 +#define USB_DWC_CTRL3 0x1C +#define USB_DWC_CTRL4 0x20 +#define USB_OTG_STATUS 0x28 +#define USB_DWC_CTRL5 0x2C +#define USB_DWC_CTRL6 0x30 +#define USB_DWC_CTRL7 0x34 +#define USB_PHY_STATUS 0xC0 +#define USB_INT_STATUS 0xC4 +#define USB_INT_ENABLE 0xC8 + +#define USB_DWC_CTRL1_OTGD 0x04 /* set to DISable OTG */ +#define USB_DWC_CTRL1_HSTRS 0x02 /* set to ENable EHCI */ +#define USB_DWC_CTRL1_DCRS 0x01 /* set to ENable UDC */ + +#define USB_DWC_CTRL2_PHY1RS 0x04 /* set to enable PHY1 */ +#define USB_DWC_CTRL2_PHY0RS 0x02 /* set to enable PHY0 */ +#define USB_DWC_CTRL2_PHYRS 0x01 /* set to enable PHY */ + +#define USB_DWC_CTRL3_OHCI1_CKEN (1 << 19) +#define USB_DWC_CTRL3_OHCI0_CKEN (1 << 18) +#define USB_DWC_CTRL3_EHCI0_CKEN (1 << 17) +#define USB_DWC_CTRL3_OTG0_CKEN (1 << 16) + +#define USB_SBUS_CTRL_SBCA 0x04 /* coherent access */ + +#define USB_INTEN_FORCE 0x20 +#define USB_INTEN_PHY 0x10 +#define USB_INTEN_UDC 0x08 +#define USB_INTEN_EHCI 0x04 +#define USB_INTEN_OHCI1 0x02 +#define USB_INTEN_OHCI0 0x01 static DEFINE_SPINLOCK(alchemy_usb_lock); +static inline void __au1300_usb_phyctl(void __iomem *base, int enable) +{ + unsigned long r, s; + + r = __raw_readl(base + USB_DWC_CTRL2); + s = __raw_readl(base + USB_DWC_CTRL3); + + s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN | + USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN; + + if (enable) { + /* simply enable all PHYs */ + r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | + USB_DWC_CTRL2_PHYRS; + __raw_writel(r, base + USB_DWC_CTRL2); + wmb(); + } else if (!s) { + /* no USB block active, do disable all PHYs */ + r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | + USB_DWC_CTRL2_PHYRS); + __raw_writel(r, base + USB_DWC_CTRL2); + wmb(); + } +} + +static inline void __au1300_ohci_control(void __iomem *base, int enable, int id) +{ + unsigned long r; + + if (enable) { + __raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */ + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); /* enable OHCI block */ + r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN + : USB_DWC_CTRL3_OHCI1_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); /* power up the PHYs */ + + r = __raw_readl(base + USB_INT_ENABLE); + r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + /* reset the OHCI start clock bit */ + __raw_writel(0, base + USB_DWC_CTRL7); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1); + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN + : USB_DWC_CTRL3_OHCI1_CKEN); + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_ehci_control(void __iomem *base, int enable) +{ + unsigned long r; + + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL3); + r |= USB_DWC_CTRL3_EHCI0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_HSTRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + + r = __raw_readl(base + USB_INT_ENABLE); + r |= USB_INTEN_EHCI; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~USB_INTEN_EHCI; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_HSTRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~USB_DWC_CTRL3_EHCI0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_udc_control(void __iomem *base, int enable) +{ + unsigned long r; + + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_DCRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + + r = __raw_readl(base + USB_INT_ENABLE); + r |= USB_INTEN_UDC; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~USB_INTEN_UDC; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_DCRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_otg_control(void __iomem *base, int enable) +{ + unsigned long r; + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL3); + r |= USB_DWC_CTRL3_OTG0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_OTGD; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + } else { + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_OTGD; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~USB_DWC_CTRL3_OTG0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline int au1300_usb_control(int block, int enable) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + int ret = 0; + + switch (block) { + case ALCHEMY_USB_OHCI0: + __au1300_ohci_control(base, enable, 0); + break; + case ALCHEMY_USB_OHCI1: + __au1300_ohci_control(base, enable, 1); + break; + case ALCHEMY_USB_EHCI0: + __au1300_ehci_control(base, enable); + break; + case ALCHEMY_USB_UDC0: + __au1300_udc_control(base, enable); + break; + case ALCHEMY_USB_OTG0: + __au1300_otg_control(base, enable); + break; + default: + ret = -ENODEV; + } + return ret; +} + +static inline void au1300_usb_init(void) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + + /* set some sane defaults. Note: we don't fiddle with DWC_CTRL4 + * here at all: Port 2 routing (EHCI or UDC) must be set either + * by boot firmware or platform init code; I can't autodetect + * a sane setting. + */ + __raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */ + wmb(); + __raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */ + wmb(); + __raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */ + wmb(); + __raw_writel(~0, base + USB_INT_STATUS); /* clear int status */ + wmb(); + /* set coherent access bit */ + __raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL); + wmb(); +} static inline void __au1200_ohci_control(void __iomem *base, int enable) { @@ -233,6 +487,9 @@ int alchemy_usb_control(int block, int enable) case ALCHEMY_CPU_AU1200: ret = au1200_usb_control(block, enable); break; + case ALCHEMY_CPU_AU1300: + ret = au1300_usb_control(block, enable); + break; default: ret = -ENODEV; } @@ -281,6 +538,20 @@ static void au1200_usb_pm(int susp) } } +static void au1300_usb_pm(int susp) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + /* remember Port2 routing */ + if (susp) { + alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4); + } else { + au1300_usb_init(); + __raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4); + wmb(); + } +} + static void alchemy_usb_pm(int susp) { switch (alchemy_get_cputype()) { @@ -295,6 +566,9 @@ static void alchemy_usb_pm(int susp) case ALCHEMY_CPU_AU1200: au1200_usb_pm(susp); break; + case ALCHEMY_CPU_AU1300: + au1300_usb_pm(susp); + break; } } @@ -328,6 +602,9 @@ static int __init alchemy_usb_init(void) case ALCHEMY_CPU_AU1200: au1200_usb_init(); break; + case ALCHEMY_CPU_AU1300: + au1300_usb_init(); + break; } register_syscore_ops(&alchemy_usb_pm_ops); diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 9b66df8..95d1a71 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -89,7 +89,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) { - int ret; + int ret, unit; struct usb_hcd *hcd; if (usb_disabled()) @@ -120,7 +120,9 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) goto err2; } - if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) { + unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; + if (alchemy_usb_control(unit, 1)) { printk(KERN_INFO "%s: controller init failed!\n", pdev->name); ret = -ENODEV; goto err3; @@ -135,7 +137,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) return ret; } - alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); + alchemy_usb_control(unit, 0); err3: iounmap(hcd->regs); err2: @@ -148,9 +150,12 @@ err1: static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); + int unit; + unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; usb_remove_hcd(hcd); - alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); + alchemy_usb_control(unit, 0); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d83e967..acd4ba5 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1763,16 +1763,16 @@ config FB_AU1100 au1100fb:panel=<name>. config FB_AU1200 - bool "Au1200 LCD Driver" + bool "Au1200/Au1300 LCD Driver" depends on (FB = y) && MIPS_ALCHEMY select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS help - This is the framebuffer driver for the AMD Au1200 SOC. It can drive - various panels and CRTs by passing in kernel cmd line option - au1200fb:panel=<name>. + This is the framebuffer driver for the Au1200/Au1300 SOCs. + It can drive various panels and CRTs by passing in kernel cmd line + option au1200fb:panel=<name>. config FB_VT8500 bool "VT8500 LCD Driver" diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index 649cb35..de9da67 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -60,18 +60,6 @@ #include "au1100fb.h" -/* - * Sanity check. If this is a new Au1100 based board, search for - * the PB1100 ifdefs to make sure you modify the code accordingly. - */ -#if defined(CONFIG_MIPS_PB1100) - #include <asm/mach-pb1x00/pb1100.h> -#elif defined(CONFIG_MIPS_DB1100) - #include <asm/mach-db1x00/db1x00.h> -#else - #error "Unknown Au1100 board, Au1100 FB driver not supported" -#endif - #define DRIVER_NAME "au1100fb" #define DRIVER_DESC "LCD controller driver for AU1100 processors" diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c index 7200559..04e4479 100644 --- a/drivers/video/au1200fb.c +++ b/drivers/video/au1200fb.c @@ -44,6 +44,7 @@ #include <linux/slab.h> #include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1200fb.h> /* platform_data */ #include "au1200fb.h" #define DRIVER_NAME "au1200fb" @@ -143,6 +144,7 @@ struct au1200_lcd_iodata_t { /* Private, per-framebuffer management information (independent of the panel itself) */ struct au1200fb_device { struct fb_info *fb_info; /* FB driver info record */ + struct au1200fb_platdata *pd; int plane; unsigned char* fb_mem; /* FrameBuffer memory map */ @@ -201,9 +203,6 @@ struct window_settings { #define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01 #endif -extern int board_au1200fb_panel_init (void); -extern int board_au1200fb_panel_shutdown (void); - /* * Default window configurations */ @@ -334,8 +333,6 @@ struct panel_settings uint32 mode_toyclksrc; uint32 mode_backlight; uint32 mode_auxpll; - int (*device_init)(void); - int (*device_shutdown)(void); #define Xres min_xres #define Yres min_yres u32 min_xres; /* Minimum horizontal resolution */ @@ -385,8 +382,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = NULL, - .device_shutdown = NULL, 320, 320, 240, 240, }, @@ -415,8 +410,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = NULL, - .device_shutdown = NULL, 640, 480, 640, 480, }, @@ -445,8 +438,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = NULL, - .device_shutdown = NULL, 800, 800, 600, 600, }, @@ -475,8 +466,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 6, /* 72MHz AUXPLL */ - .device_init = NULL, - .device_shutdown = NULL, 1024, 1024, 768, 768, }, @@ -505,8 +494,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 10, /* 120MHz AUXPLL */ - .device_init = NULL, - .device_shutdown = NULL, 1280, 1280, 1024, 1024, }, @@ -535,8 +522,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = board_au1200fb_panel_init, - .device_shutdown = board_au1200fb_panel_shutdown, 1024, 1024, 768, 768, }, @@ -568,8 +553,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = board_au1200fb_panel_init, - .device_shutdown = board_au1200fb_panel_shutdown, 640, 480, 640, 480, }, @@ -601,8 +584,6 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = board_au1200fb_panel_init, - .device_shutdown = board_au1200fb_panel_shutdown, 320, 320, 240, 240, }, @@ -634,11 +615,43 @@ static struct panel_settings known_lcd_panels[] = .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ .mode_backlight = 0x00000000, .mode_auxpll = 8, /* 96MHz AUXPLL */ - .device_init = board_au1200fb_panel_init, - .device_shutdown = board_au1200fb_panel_shutdown, 856, 856, 480, 480, }, + [9] = { + .name = "DB1300_800x480", + .monspecs = { + .modedb = NULL, + .modedb_len = 0, + .hfmin = 30000, + .hfmax = 70000, + .vfmin = 60, + .vfmax = 60, + .dclkmin = 6000000, + .dclkmax = 28000000, + .input = FB_DISP_RGB, + }, + .mode_screen = LCD_SCREEN_SX_N(800) | + LCD_SCREEN_SY_N(480), + .mode_horztiming = LCD_HORZTIMING_HPW_N(5) | + LCD_HORZTIMING_HND1_N(16) | + LCD_HORZTIMING_HND2_N(8), + .mode_verttiming = LCD_VERTTIMING_VPW_N(4) | + LCD_VERTTIMING_VND1_N(8) | + LCD_VERTTIMING_VND2_N(5), + .mode_clkcontrol = LCD_CLKCONTROL_PCD_N(1) | + LCD_CLKCONTROL_IV | + LCD_CLKCONTROL_IH, + .mode_pwmdiv = 0x00000000, + .mode_pwmhi = 0x00000000, + .mode_outmask = 0x00FFFFFF, + .mode_fifoctrl = 0x2f2f2f2f, + .mode_toyclksrc = 0x00000004, /* AUXPLL directly */ + .mode_backlight = 0x00000000, + .mode_auxpll = (48/12) * 2, + 800, 800, + 480, 480, + }, }; #define NUM_PANELS (ARRAY_SIZE(known_lcd_panels)) @@ -764,7 +777,8 @@ static int au1200_setlocation (struct au1200fb_device *fbdev, int plane, return 0; } -static void au1200_setpanel (struct panel_settings *newpanel) +static void au1200_setpanel(struct panel_settings *newpanel, + struct au1200fb_platdata *pd) { /* * Perform global setup/init of LCD controller @@ -798,8 +812,8 @@ static void au1200_setpanel (struct panel_settings *newpanel) the controller, the clock cannot be turned off before first shutting down the controller. */ - if (panel->device_shutdown != NULL) - panel->device_shutdown(); + if (pd->panel_shutdown) + pd->panel_shutdown(); } /* Newpanel == NULL indicates a shutdown operation only */ @@ -852,7 +866,8 @@ static void au1200_setpanel (struct panel_settings *newpanel) au_sync(); /* Call init of panel */ - if (panel->device_init != NULL) panel->device_init(); + if (pd->panel_init) + pd->panel_init(); /* FIX!!!! not appropriate on panel change!!! Global setup/init */ lcd->intenable = 0; @@ -1185,6 +1200,8 @@ static int au1200fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, */ static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi) { + struct au1200fb_device *fbdev = fbi->par; + /* Short-circuit screen blanking */ if (noblanking) return 0; @@ -1194,13 +1211,13 @@ static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi) case FB_BLANK_UNBLANK: case FB_BLANK_NORMAL: /* printk("turn on panel\n"); */ - au1200_setpanel(panel); + au1200_setpanel(panel, fbdev->pd); break; case FB_BLANK_VSYNC_SUSPEND: case FB_BLANK_HSYNC_SUSPEND: case FB_BLANK_POWERDOWN: /* printk("turn off panel\n"); */ - au1200_setpanel(NULL); + au1200_setpanel(NULL, fbdev->pd); break; default: break; @@ -1428,6 +1445,7 @@ static void get_window(unsigned int plane, static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) { + struct au1200fb_device *fbdev = info->par; int plane; int val; @@ -1472,7 +1490,7 @@ static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd, struct panel_settings *newpanel; panel_index = iodata.global.panel_choice; newpanel = &known_lcd_panels[panel_index]; - au1200_setpanel(newpanel); + au1200_setpanel(newpanel, fbdev->pd); } break; @@ -1588,22 +1606,102 @@ static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev) /*-------------------------------------------------------------------------*/ -/* AU1200 LCD controller device driver */ +static int au1200fb_setup(struct au1200fb_platdata *pd) +{ + char *options = NULL; + char *this_opt, *endptr; + int num_panels = ARRAY_SIZE(known_lcd_panels); + int panel_idx = -1; + + fb_get_options(DRIVER_NAME, &options); + + if (!options) + goto out; + + while ((this_opt = strsep(&options, ",")) != NULL) { + /* Panel option - can be panel name, + * "bs" for board-switch, or number/index */ + if (!strncmp(this_opt, "panel:", 6)) { + int i; + long int li; + char *endptr; + this_opt += 6; + /* First check for index, which allows + * to short circuit this mess */ + li = simple_strtol(this_opt, &endptr, 0); + if (*endptr == '\0') + panel_idx = (int)li; + else if (strcmp(this_opt, "bs") == 0) + panel_idx = pd->panel_index(); + else { + for (i = 0; i < num_panels; i++) { + if (!strcmp(this_opt, + known_lcd_panels[i].name)) { + panel_idx = i; + break; + } + } + } + if ((panel_idx < 0) || (panel_idx >= num_panels)) + print_warn("Panel %s not supported!", this_opt); + else + panel_index = panel_idx; + + } else if (strncmp(this_opt, "nohwcursor", 10) == 0) + nohwcursor = 1; + else if (strncmp(this_opt, "devices:", 8) == 0) { + this_opt += 8; + device_count = simple_strtol(this_opt, &endptr, 0); + if ((device_count < 0) || + (device_count > MAX_DEVICE_COUNT)) + device_count = MAX_DEVICE_COUNT; + } else if (strncmp(this_opt, "wincfg:", 7) == 0) { + this_opt += 7; + window_index = simple_strtol(this_opt, &endptr, 0); + if ((window_index < 0) || + (window_index >= ARRAY_SIZE(windows))) + window_index = DEFAULT_WINDOW_INDEX; + } else if (strncmp(this_opt, "off", 3) == 0) + return 1; + else + print_warn("Unsupported option \"%s\"", this_opt); + } + +out: + return 0; +} + +/* AU1200 LCD controller device driver */ static int __devinit au1200fb_drv_probe(struct platform_device *dev) { struct au1200fb_device *fbdev; + struct au1200fb_platdata *pd; struct fb_info *fbi = NULL; unsigned long page; int bpp, plane, ret, irq; + print_info("" DRIVER_DESC ""); + + pd = dev->dev.platform_data; + if (!pd) + return -ENODEV; + + /* Setup driver with options */ + if (au1200fb_setup(pd)) + return -ENODEV; + + /* Point to the panel selected */ + panel = &known_lcd_panels[panel_index]; + win = &windows[window_index]; + + printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name); + printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name); + /* shut gcc up */ ret = 0; fbdev = NULL; - /* Kickstart the panel */ - au1200_setpanel(panel); - for (plane = 0; plane < device_count; ++plane) { bpp = winbpp(win->w[plane].mode_winctrl1); if (win->w[plane].xres == 0) @@ -1619,6 +1717,7 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev) _au1200fb_infos[plane] = fbi; fbdev = fbi->par; fbdev->fb_info = fbi; + fbdev->pd = pd; fbdev->plane = plane; @@ -1680,6 +1779,11 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev) goto failed; } + platform_set_drvdata(dev, pd); + + /* Kickstart the panel */ + au1200_setpanel(panel, pd); + return 0; failed: @@ -1699,12 +1803,13 @@ failed: static int __devexit au1200fb_drv_remove(struct platform_device *dev) { + struct au1200fb_platdata *pd = platform_get_drvdata(dev); struct au1200fb_device *fbdev; struct fb_info *fbi; int plane; /* Turn off the panel */ - au1200_setpanel(NULL); + au1200_setpanel(NULL, pd); for (plane = 0; plane < device_count; ++plane) { fbi = _au1200fb_infos[plane]; @@ -1732,7 +1837,8 @@ static int __devexit au1200fb_drv_remove(struct platform_device *dev) #ifdef CONFIG_PM static int au1200fb_drv_suspend(struct device *dev) { - au1200_setpanel(NULL); + struct au1200fb_platdata *pd = dev_get_drvdata(dev); + au1200_setpanel(NULL, pd); lcd->outmask = 0; au_sync(); @@ -1742,11 +1848,12 @@ static int au1200fb_drv_suspend(struct device *dev) static int au1200fb_drv_resume(struct device *dev) { + struct au1200fb_platdata *pd = dev_get_drvdata(dev); struct fb_info *fbi; int i; /* Kickstart the panel */ - au1200_setpanel(panel); + au1200_setpanel(panel, pd); for (i = 0; i < device_count; i++) { fbi = _au1200fb_infos[i]; @@ -1781,100 +1888,8 @@ static struct platform_driver au1200fb_driver = { /*-------------------------------------------------------------------------*/ -/* Kernel driver */ - -static int au1200fb_setup(void) -{ - char *options = NULL; - char *this_opt, *endptr; - int num_panels = ARRAY_SIZE(known_lcd_panels); - int panel_idx = -1; - - fb_get_options(DRIVER_NAME, &options); - - if (options) { - while ((this_opt = strsep(&options,",")) != NULL) { - /* Panel option - can be panel name, - * "bs" for board-switch, or number/index */ - if (!strncmp(this_opt, "panel:", 6)) { - int i; - long int li; - char *endptr; - this_opt += 6; - /* First check for index, which allows - * to short circuit this mess */ - li = simple_strtol(this_opt, &endptr, 0); - if (*endptr == '\0') { - panel_idx = (int)li; - } - else if (strcmp(this_opt, "bs") == 0) { - extern int board_au1200fb_panel(void); - panel_idx = board_au1200fb_panel(); - } - - else - for (i = 0; i < num_panels; i++) { - if (!strcmp(this_opt, known_lcd_panels[i].name)) { - panel_idx = i; - break; - } - } - - if ((panel_idx < 0) || (panel_idx >= num_panels)) { - print_warn("Panel %s not supported!", this_opt); - } - else - panel_index = panel_idx; - } - - else if (strncmp(this_opt, "nohwcursor", 10) == 0) { - nohwcursor = 1; - } - - else if (strncmp(this_opt, "devices:", 8) == 0) { - this_opt += 8; - device_count = simple_strtol(this_opt, - &endptr, 0); - if ((device_count < 0) || - (device_count > MAX_DEVICE_COUNT)) - device_count = MAX_DEVICE_COUNT; - } - - else if (strncmp(this_opt, "wincfg:", 7) == 0) { - this_opt += 7; - window_index = simple_strtol(this_opt, - &endptr, 0); - if ((window_index < 0) || - (window_index >= ARRAY_SIZE(windows))) - window_index = DEFAULT_WINDOW_INDEX; - } - - else if (strncmp(this_opt, "off", 3) == 0) - return 1; - /* Unsupported option */ - else { - print_warn("Unsupported option \"%s\"", this_opt); - } - } - } - return 0; -} - static int __init au1200fb_init(void) { - print_info("" DRIVER_DESC ""); - - /* Setup driver with options */ - if (au1200fb_setup()) - return -ENODEV; - - /* Point to the panel selected */ - panel = &known_lcd_panels[panel_index]; - win = &windows[window_index]; - - printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name); - printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name); - return platform_driver_register(&au1200fb_driver); } |