11 files changed, 591 insertions, 109 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0356099..c4067d0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -114,6 +114,14 @@ config GPIO_EP93XX
 	depends on ARCH_EP93XX
 	select GPIO_GENERIC
 
+config GPIO_MM_LANTIQ
+	bool "Lantiq Memory mapped GPIOs"
+	depends on LANTIQ && SOC_XWAY
+	help
+	  This enables support for memory mapped GPIOs on the External Bus Unit
+	  (EBU) found on Lantiq SoCs. The gpios are output only as they are
+	  created by attaching a 16bit latch to the bus.
+
 config GPIO_MPC5200
 	def_bool y
 	depends on PPC_MPC52xx
@@ -358,6 +366,16 @@ config GPIO_STMPE
 	  This enables support for the GPIOs found on the STMPE I/O
 	  Expanders.
 
+config GPIO_STP_XWAY
+	bool "XWAY STP GPIOs"
+	depends on SOC_XWAY
+	help
+	  This enables support for the Serial To Parallel (STP) unit found on
+	  XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
+	  that can be up to 24 bit. This peripheral is aimed at driving leds.
+	  Some of the gpios/leds can be auto updated by the soc with dsl and
+	  phy status.
+
 config GPIO_TC3589X
 	bool "TC3589X GPIOs"
 	depends on MFD_TC3589X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fde36e5..0f55662 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_GPIO_MC33880)	+= gpio-mc33880.o
 obj-$(CONFIG_GPIO_MC9S08DZ60)	+= gpio-mc9s08dz60.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
 obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
+obj-$(CONFIG_GPIO_MM_LANTIQ)	+= gpio-mm-lantiq.o
 obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o
 obj-$(CONFIG_GPIO_MPC8XXX)	+= gpio-mpc8xxx.o
 obj-$(CONFIG_GPIO_MSIC)		+= gpio-msic.o
@@ -54,6 +55,7 @@ obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
 obj-$(CONFIG_GPIO_SODAVILLE)	+= gpio-sodaville.o
 obj-$(CONFIG_GPIO_STA2X11)	+= gpio-sta2x11.o
 obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
+obj-$(CONFIG_GPIO_STP_XWAY)	+= gpio-stp-xway.o
 obj-$(CONFIG_GPIO_SX150X)	+= gpio-sx150x.o
 obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
diff --git a/drivers/gpio/gpio-mm-lantiq.c b/drivers/gpio/gpio-mm-lantiq.c
new file mode 100644
index 0000000..2983dfb
--- /dev/null
+++ b/drivers/gpio/gpio-mm-lantiq.c
@@ -0,0 +1,158 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <lantiq_soc.h>
+
+/*
+ * By attaching hardware latches to the EBU it is possible to create output
+ * only gpios. This driver configures a special memory address, which when
+ * written to outputs 16 bit to the latches.
+ */
+
+#define LTQ_EBU_BUSCON	0x1e7ff		/* 16 bit access, slowest timing */
+#define LTQ_EBU_WP	0x80000000	/* write protect bit */
+
+struct ltq_mm {
+	struct of_mm_gpio_chip mmchip;
+	u16 shadow;	/* shadow the latches state */
+};
+
+/**
+ * ltq_mm_apply() - write the shadow value to the ebu address.
+ * @chip:     Pointer to our private data structure.
+ *
+ * Write the shadow value to the EBU to set the gpios. We need to set the
+ * global EBU lock to make sure that PCI/MTD dont break.
+ */
+static void ltq_mm_apply(struct ltq_mm *chip)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);
+	__raw_writew(chip->shadow, chip->mmchip.regs);
+	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+/**
+ * ltq_mm_set() - gpio_chip->set - set gpios.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * Set the shadow value and call ltq_mm_apply.
+ */
+static void ltq_mm_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct ltq_mm *chip =
+		container_of(mm_gc, struct ltq_mm, mmchip);
+
+	if (value)
+		chip->shadow |= (1 << offset);
+	else
+		chip->shadow &= ~(1 << offset);
+	ltq_mm_apply(chip);
+}
+
+/**
+ * ltq_mm_dir_out() - gpio_chip->dir_out - set gpio direction.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * Same as ltq_mm_set, always returns 0.
+ */
+static int ltq_mm_dir_out(struct gpio_chip *gc, unsigned offset, int value)
+{
+	ltq_mm_set(gc, offset, value);
+
+	return 0;
+}
+
+/**
+ * ltq_mm_save_regs() - Set initial values of GPIO pins
+ * @mm_gc: pointer to memory mapped GPIO chip structure
+ */
+static void ltq_mm_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct ltq_mm *chip =
+		container_of(mm_gc, struct ltq_mm, mmchip);
+
+	/* tell the ebu controller which memory address we will be using */
+	ltq_ebu_w32(CPHYSADDR(chip->mmchip.regs) | 0x1, LTQ_EBU_ADDRSEL1);
+
+	ltq_mm_apply(chip);
+}
+
+static int ltq_mm_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct ltq_mm *chip;
+	const __be32 *shadow;
+	int ret = 0;
+
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		return -ENOENT;
+	}
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->mmchip.gc.ngpio = 16;
+	chip->mmchip.gc.label = "gpio-mm-ltq";
+	chip->mmchip.gc.direction_output = ltq_mm_dir_out;
+	chip->mmchip.gc.set = ltq_mm_set;
+	chip->mmchip.save_regs = ltq_mm_save_regs;
+
+	/* store the shadow value if one was passed by the devicetree */
+	shadow = of_get_property(pdev->dev.of_node, "lantiq,shadow", NULL);
+	if (shadow)
+		chip->shadow = be32_to_cpu(*shadow);
+
+	ret = of_mm_gpiochip_add(pdev->dev.of_node, &chip->mmchip);
+	if (ret)
+		kfree(chip);
+	return ret;
+}
+
+static const struct of_device_id ltq_mm_match[] = {
+	{ .compatible = "lantiq,gpio-mm" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_mm_match);
+
+static struct platform_driver ltq_mm_driver = {
+	.probe = ltq_mm_probe,
+	.driver = {
+		.name = "gpio-mm-ltq",
+		.owner = THIS_MODULE,
+		.of_match_table = ltq_mm_match,
+	},
+};
+
+static int __init ltq_mm_init(void)
+{
+	return platform_driver_register(&ltq_mm_driver);
+}
+
+subsys_initcall(ltq_mm_init);
diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c
new file mode 100644
index 0000000..e35096b
--- /dev/null
+++ b/drivers/gpio/gpio-stp-xway.c
@@ -0,0 +1,301 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/of_platform.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <lantiq_soc.h>
+
+/*
+ * The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
+ * peripheral controller used to drive external shift register cascades. At most
+ * 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
+ * to drive the 2 LSBs of the cascade automatically.
+ */
+
+/* control register 0 */
+#define XWAY_STP_CON0		0x00
+/* control register 1 */
+#define XWAY_STP_CON1		0x04
+/* data register 0 */
+#define XWAY_STP_CPU0		0x08
+/* data register 1 */
+#define XWAY_STP_CPU1		0x0C
+/* access register */
+#define XWAY_STP_AR		0x10
+
+/* software or hardware update select bit */
+#define XWAY_STP_CON_SWU	BIT(31)
+
+/* automatic update rates */
+#define XWAY_STP_2HZ		0
+#define XWAY_STP_4HZ		BIT(23)
+#define XWAY_STP_8HZ		BIT(24)
+#define XWAY_STP_10HZ		(BIT(24) | BIT(23))
+#define XWAY_STP_SPEED_MASK	(0xf << 23)
+
+/* clock source for automatic update */
+#define XWAY_STP_UPD_FPI	BIT(31)
+#define XWAY_STP_UPD_MASK	(BIT(31) | BIT(30))
+
+/* let the adsl core drive the 2 LSBs */
+#define XWAY_STP_ADSL_SHIFT	24
+#define XWAY_STP_ADSL_MASK	0x3
+
+/* 2 groups of 3 bits can be driven by the phys */
+#define XWAY_STP_PHY_MASK	0x3
+#define XWAY_STP_PHY1_SHIFT	27
+#define XWAY_STP_PHY2_SHIFT	15
+
+/* STP has 3 groups of 8 bits */
+#define XWAY_STP_GROUP0		BIT(0)
+#define XWAY_STP_GROUP1		BIT(1)
+#define XWAY_STP_GROUP2		BIT(2)
+#define XWAY_STP_GROUP_MASK	(0x7)
+
+/* Edge configuration bits */
+#define XWAY_STP_FALLING	BIT(26)
+#define XWAY_STP_EDGE_MASK	BIT(26)
+
+#define xway_stp_r32(m, reg)		__raw_readl(m + reg)
+#define xway_stp_w32(m, val, reg)	__raw_writel(val, m + reg)
+#define xway_stp_w32_mask(m, clear, set, reg) \
+		ltq_w32((ltq_r32(m + reg) & ~(clear)) | (set), \
+		m + reg)
+
+struct xway_stp {
+	struct gpio_chip gc;
+	void __iomem *virt;
+	u32 edge;	/* rising or falling edge triggered shift register */
+	u16 shadow;	/* shadow the shift registers state */
+	u8 groups;	/* we can drive 1-3 groups of 8bit each */
+	u8 dsl;		/* the 2 LSBs can be driven by the dsl core */
+	u8 phy1;	/* 3 bits can be driven by phy1 */
+	u8 phy2;	/* 3 bits can be driven by phy2 */
+	u8 reserved;	/* mask out the hw driven bits in gpio_request */
+};
+
+/**
+ * xway_stp_set() - gpio_chip->set - set gpios.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * Set the shadow value and call ltq_ebu_apply.
+ */
+static void xway_stp_set(struct gpio_chip *gc, unsigned gpio, int val)
+{
+	struct xway_stp *chip =
+		container_of(gc, struct xway_stp, gc);
+
+	if (val)
+		chip->shadow |= BIT(gpio);
+	else
+		chip->shadow &= ~BIT(gpio);
+	xway_stp_w32(chip->virt, chip->shadow, XWAY_STP_CPU0);
+	xway_stp_w32_mask(chip->virt, 0, XWAY_STP_CON_SWU, XWAY_STP_CON0);
+}
+
+/**
+ * xway_stp_dir_out() - gpio_chip->dir_out - set gpio direction.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * Same as xway_stp_set, always returns 0.
+ */
+static int xway_stp_dir_out(struct gpio_chip *gc, unsigned gpio, int val)
+{
+	xway_stp_set(gc, gpio, val);
+
+	return 0;
+}
+
+/**
+ * xway_stp_request() - gpio_chip->request
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ *
+ * We mask out the HW driven pins
+ */
+static int xway_stp_request(struct gpio_chip *gc, unsigned gpio)
+{
+	struct xway_stp *chip =
+		container_of(gc, struct xway_stp, gc);
+
+	if ((gpio < 8) && (chip->reserved & BIT(gpio))) {
+		dev_err(gc->dev, "GPIO %d is driven by hardware\n", gpio);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/**
+ * xway_stp_hw_init() - Configure the STP unit and enable the clock gate
+ * @virt: pointer to the remapped register range
+ */
+static int xway_stp_hw_init(struct xway_stp *chip)
+{
+	/* sane defaults */
+	xway_stp_w32(chip->virt, 0, XWAY_STP_AR);
+	xway_stp_w32(chip->virt, 0, XWAY_STP_CPU0);
+	xway_stp_w32(chip->virt, 0, XWAY_STP_CPU1);
+	xway_stp_w32(chip->virt, XWAY_STP_CON_SWU, XWAY_STP_CON0);
+	xway_stp_w32(chip->virt, 0, XWAY_STP_CON1);
+
+	/* apply edge trigger settings for the shift register */
+	xway_stp_w32_mask(chip->virt, XWAY_STP_EDGE_MASK,
+				chip->edge, XWAY_STP_CON0);
+
+	/* apply led group settings */
+	xway_stp_w32_mask(chip->virt, XWAY_STP_GROUP_MASK,
+				chip->groups, XWAY_STP_CON1);
+
+	/* tell the hardware which pins are controlled by the dsl modem */
+	xway_stp_w32_mask(chip->virt,
+			XWAY_STP_ADSL_MASK << XWAY_STP_ADSL_SHIFT,
+			chip->dsl << XWAY_STP_ADSL_SHIFT,
+			XWAY_STP_CON0);
+
+	/* tell the hardware which pins are controlled by the phys */
+	xway_stp_w32_mask(chip->virt,
+			XWAY_STP_PHY_MASK << XWAY_STP_PHY1_SHIFT,
+			chip->phy1 << XWAY_STP_PHY1_SHIFT,
+			XWAY_STP_CON0);
+	xway_stp_w32_mask(chip->virt,
+			XWAY_STP_PHY_MASK << XWAY_STP_PHY2_SHIFT,
+			chip->phy2 << XWAY_STP_PHY2_SHIFT,
+			XWAY_STP_CON1);
+
+	/* mask out the hw driven bits in gpio_request */
+	chip->reserved = (chip->phy2 << 5) | (chip->phy1 << 2) | chip->dsl;
+
+	/*
+	 * if we have pins that are driven by hw, we need to tell the stp what
+	 * clock to use as a timer.
+	 */
+	if (chip->reserved)
+		xway_stp_w32_mask(chip->virt, XWAY_STP_UPD_MASK,
+			XWAY_STP_UPD_FPI, XWAY_STP_CON1);
+
+	return 0;
+}
+
+static int __devinit xway_stp_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	const __be32 *shadow, *groups, *dsl, *phy;
+	struct xway_stp *chip;
+	struct clk *clk;
+	int ret = 0;
+
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request STP resource\n");
+		return -ENOENT;
+	}
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->virt = devm_request_and_ioremap(&pdev->dev, res);
+	if (!chip->virt) {
+		dev_err(&pdev->dev, "failed to remap STP memory\n");
+		return -ENOMEM;
+	}
+	chip->gc.dev = &pdev->dev;
+	chip->gc.label = "stp-xway";
+	chip->gc.direction_output = xway_stp_dir_out;
+	chip->gc.set = xway_stp_set;
+	chip->gc.request = xway_stp_request;
+	chip->gc.base = -1;
+	chip->gc.owner = THIS_MODULE;
+
+	/* store the shadow value if one was passed by the devicetree */
+	shadow = of_get_property(pdev->dev.of_node, "lantiq,shadow", NULL);
+	if (shadow)
+		chip->shadow = be32_to_cpu(*shadow);
+
+	/* find out which gpio groups should be enabled */
+	groups = of_get_property(pdev->dev.of_node, "lantiq,groups", NULL);
+	if (groups)
+		chip->groups = be32_to_cpu(*groups) & XWAY_STP_GROUP_MASK;
+	else
+		chip->groups = XWAY_STP_GROUP0;
+	chip->gc.ngpio = fls(chip->groups) * 8;
+
+	/* find out which gpios are controlled by the dsl core */
+	dsl = of_get_property(pdev->dev.of_node, "lantiq,dsl", NULL);
+	if (dsl)
+		chip->dsl = be32_to_cpu(*dsl) & XWAY_STP_ADSL_MASK;
+
+	/* find out which gpios are controlled by the phys */
+	if (of_machine_is_compatible("lantiq,ar9") ||
+			of_machine_is_compatible("lantiq,gr9") ||
+			of_machine_is_compatible("lantiq,vr9")) {
+		phy = of_get_property(pdev->dev.of_node, "lantiq,phy1", NULL);
+		if (phy)
+			chip->phy1 = be32_to_cpu(*phy) & XWAY_STP_PHY_MASK;
+		phy = of_get_property(pdev->dev.of_node, "lantiq,phy2", NULL);
+		if (phy)
+			chip->phy2 = be32_to_cpu(*phy) & XWAY_STP_PHY_MASK;
+	}
+
+	/* check which edge trigger we should use, default to a falling edge */
+	if (!of_find_property(pdev->dev.of_node, "lantiq,rising", NULL))
+		chip->edge = XWAY_STP_FALLING;
+
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Failed to get clock\n");
+		return PTR_ERR(clk);
+	}
+	clk_enable(clk);
+
+	ret = xway_stp_hw_init(chip);
+	if (!ret)
+		ret = gpiochip_add(&chip->gc);
+
+	if (!ret)
+		dev_info(&pdev->dev, "Init done\n");
+
+	return ret;
+}
+
+static const struct of_device_id xway_stp_match[] = {
+	{ .compatible = "lantiq,gpio-stp-xway" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xway_stp_match);
+
+static struct platform_driver xway_stp_driver = {
+	.probe = xway_stp_probe,
+	.driver = {
+		.name = "gpio-stp-xway",
+		.owner = THIS_MODULE,
+		.of_match_table = xway_stp_match,
+	},
+};
+
+int __init xway_stp_init(void)
+{
+	return platform_driver_register(&xway_stp_driver);
+}
+
+subsys_initcall(xway_stp_init);
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
index b5401e3..c03456f 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -19,9 +19,9 @@
 #include <linux/mtd/cfi.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/of.h>
 
 #include <lantiq_soc.h>
-#include <lantiq_platform.h>
 
 /*
  * The NOR flash is connected to the same external bus unit (EBU) as PCI.
@@ -44,8 +44,9 @@ struct ltq_mtd {
 	struct map_info *map;
 };
 
-static char ltq_map_name[] = "ltq_nor";
-static const char *ltq_probe_types[] __devinitconst = { "cmdlinepart", NULL };
+static const char ltq_map_name[] = "ltq_nor";
+static const char *ltq_probe_types[] __devinitconst = {
+					"cmdlinepart", "ofpart", NULL };
 
 static map_word
 ltq_read16(struct map_info *map, unsigned long adr)
@@ -108,42 +109,38 @@ ltq_copy_to(struct map_info *map, unsigned long to,
 	spin_unlock_irqrestore(&ebu_lock, flags);
 }
 
-static int __init
+static int __devinit
 ltq_mtd_probe(struct platform_device *pdev)
 {
-	struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
+	struct mtd_part_parser_data ppdata;
 	struct ltq_mtd *ltq_mtd;
-	struct resource *res;
 	struct cfi_private *cfi;
 	int err;
 
+	if (of_machine_is_compatible("lantiq,falcon") &&
+			(ltq_boot_select() != BS_FLASH)) {
+		dev_err(&pdev->dev, "invalid bootstrap options\n");
+		return -ENODEV;
+	}
+
 	ltq_mtd = kzalloc(sizeof(struct ltq_mtd), GFP_KERNEL);
 	platform_set_drvdata(pdev, ltq_mtd);
 
 	ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!ltq_mtd->res) {
-		dev_err(&pdev->dev, "failed to get memory resource");
+		dev_err(&pdev->dev, "failed to get memory resource\n");
 		err = -ENOENT;
 		goto err_out;
 	}
 
-	res = devm_request_mem_region(&pdev->dev, ltq_mtd->res->start,
-		resource_size(ltq_mtd->res), dev_name(&pdev->dev));
-	if (!ltq_mtd->res) {
-		dev_err(&pdev->dev, "failed to request mem resource");
-		err = -EBUSY;
-		goto err_out;
-	}
-
 	ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL);
-	ltq_mtd->map->phys = res->start;
-	ltq_mtd->map->size = resource_size(res);
-	ltq_mtd->map->virt = devm_ioremap_nocache(&pdev->dev,
-				ltq_mtd->map->phys, ltq_mtd->map->size);
+	ltq_mtd->map->phys = ltq_mtd->res->start;
+	ltq_mtd->map->size = resource_size(ltq_mtd->res);
+	ltq_mtd->map->virt = devm_request_and_ioremap(&pdev->dev, ltq_mtd->res);
 	if (!ltq_mtd->map->virt) {
-		dev_err(&pdev->dev, "failed to ioremap!\n");
-		err = -ENOMEM;
-		goto err_free;
+		dev_err(&pdev->dev, "failed to remap mem resource\n");
+		err = -EBUSY;
+		goto err_out;
 	}
 
 	ltq_mtd->map->name = ltq_map_name;
@@ -169,9 +166,9 @@ ltq_mtd_probe(struct platform_device *pdev)
 	cfi->addr_unlock1 ^= 1;
 	cfi->addr_unlock2 ^= 1;
 
-	err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types, NULL,
-					ltq_mtd_data->parts,
-					ltq_mtd_data->nr_parts);
+	ppdata.of_node = pdev->dev.of_node;
+	err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types,
+					&ppdata, NULL, 0);
 	if (err) {
 		dev_err(&pdev->dev, "failed to add partitions\n");
 		goto err_destroy;
@@ -204,32 +201,23 @@ ltq_mtd_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id ltq_mtd_match[] = {
+	{ .compatible = "lantiq,nor" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_mtd_match);
+
 static struct platform_driver ltq_mtd_driver = {
+	.probe = ltq_mtd_probe,
 	.remove = __devexit_p(ltq_mtd_remove),
 	.driver = {
-		.name = "ltq_nor",
+		.name = "ltq-nor",
 		.owner = THIS_MODULE,
+		.of_match_table = ltq_mtd_match,
 	},
 };
 
-static int __init
-init_ltq_mtd(void)
-{
-	int ret = platform_driver_probe(&ltq_mtd_driver, ltq_mtd_probe);
-
-	if (ret)
-		pr_err("ltq_nor: error registering platform driver");
-	return ret;
-}
-
-static void __exit
-exit_ltq_mtd(void)
-{
-	platform_driver_unregister(&ltq_mtd_driver);
-}
-
-module_init(init_ltq_mtd);
-module_exit(exit_ltq_mtd);
+module_platform_driver(ltq_mtd_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
index 9312516..6770538 100644
--- a/drivers/of/of_pci_irq.c
+++ b/drivers/of/of_pci_irq.c
@@ -15,7 +15,7 @@
  * PCI tree until an device-node is found, at which point it will finish
  * resolving using the OF tree walking.
  */
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+int of_irq_map_pci(const struct pci_dev *pdev, struct of_irq *out_irq)
 {
 	struct device_node *dn, *ppnode;
 	struct pci_dev *ppdev;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8f16900..447e834 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2370,7 +2370,7 @@ void pci_enable_acs(struct pci_dev *dev)
  * number is always 0 (see the Implementation Note in section 2.2.8.1 of
  * the PCI Express Base Specification, Revision 2.1)
  */
-u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
+u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin)
 {
 	int slot;
 
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 96c1cac..02da071 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -31,16 +31,19 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
-#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 
 #include <lantiq_soc.h>
 
 #define PORT_LTQ_ASC		111
 #define MAXPORTS		2
 #define UART_DUMMY_UER_RX	1
-#define DRVNAME			"ltq_asc"
+#define DRVNAME			"lantiq,asc"
 #ifdef __BIG_ENDIAN
 #define LTQ_ASC_TBUF		(0x0020 + 3)
 #define LTQ_ASC_RBUF		(0x0024 + 3)
@@ -114,6 +117,9 @@ static DEFINE_SPINLOCK(ltq_asc_lock);
 
 struct ltq_uart_port {
 	struct uart_port	port;
+	/* clock used to derive divider */
+	struct clk		*fpiclk;
+	/* clock gating of the ASC core */
 	struct clk		*clk;
 	unsigned int		tx_irq;
 	unsigned int		rx_irq;
@@ -316,7 +322,9 @@ lqasc_startup(struct uart_port *port)
 	struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
 	int retval;
 
-	port->uartclk = clk_get_rate(ltq_port->clk);
+	if (ltq_port->clk)
+		clk_enable(ltq_port->clk);
+	port->uartclk = clk_get_rate(ltq_port->fpiclk);
 
 	ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
 		port->membase + LTQ_ASC_CLC);
@@ -382,6 +390,8 @@ lqasc_shutdown(struct uart_port *port)
 		port->membase + LTQ_ASC_RXFCON);
 	ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
 		port->membase + LTQ_ASC_TXFCON);
+	if (ltq_port->clk)
+		clk_disable(ltq_port->clk);
 }
 
 static void
@@ -630,7 +640,7 @@ lqasc_console_setup(struct console *co, char *options)
 
 	port = &ltq_port->port;
 
-	port->uartclk = clk_get_rate(ltq_port->clk);
+	port->uartclk = clk_get_rate(ltq_port->fpiclk);
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -668,37 +678,32 @@ static struct uart_driver lqasc_reg = {
 static int __init
 lqasc_probe(struct platform_device *pdev)
 {
+	struct device_node *node = pdev->dev.of_node;
 	struct ltq_uart_port *ltq_port;
 	struct uart_port *port;
-	struct resource *mmres, *irqres;
-	int tx_irq, rx_irq, err_irq;
-	struct clk *clk;
+	struct resource *mmres, irqres[3];
+	int line = 0;
 	int ret;
 
 	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!mmres || !irqres)
+	ret = of_irq_to_resource_table(node, irqres, 3);
+	if (!mmres || (ret != 3)) {
+		dev_err(&pdev->dev,
+			"failed to get memory/irq for serial port\n");
 		return -ENODEV;
+	}
 
-	if (pdev->id >= MAXPORTS)
-		return -EBUSY;
+	/* check if this is the console port */
+	if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC))
+		line = 1;
 
-	if (lqasc_port[pdev->id] != NULL)
+	if (lqasc_port[line]) {
+		dev_err(&pdev->dev, "port %d already allocated\n", line);
 		return -EBUSY;
-
-	clk = clk_get(&pdev->dev, "fpi");
-	if (IS_ERR(clk)) {
-		pr_err("failed to get fpi clk\n");
-		return -ENOENT;
 	}
 
-	tx_irq = platform_get_irq_byname(pdev, "tx");
-	rx_irq = platform_get_irq_byname(pdev, "rx");
-	err_irq = platform_get_irq_byname(pdev, "err");
-	if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0))
-		return -ENODEV;
-
-	ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL);
+	ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port),
+			GFP_KERNEL);
 	if (!ltq_port)
 		return -ENOMEM;
 
@@ -709,19 +714,26 @@ lqasc_probe(struct platform_device *pdev)
 	port->ops	= &lqasc_pops;
 	port->fifosize	= 16;
 	port->type	= PORT_LTQ_ASC,
-	port->line	= pdev->id;
+	port->line	= line;
 	port->dev	= &pdev->dev;
-
-	port->irq	= tx_irq; /* unused, just to be backward-compatibe */
+	/* unused, just to be backward-compatible */
+	port->irq	= irqres[0].start;
 	port->mapbase	= mmres->start;
 
-	ltq_port->clk	= clk;
+	ltq_port->fpiclk = clk_get_fpi();
+	if (IS_ERR(ltq_port->fpiclk)) {
+		pr_err("failed to get fpi clk\n");
+		return -ENOENT;
+	}
 
-	ltq_port->tx_irq = tx_irq;
-	ltq_port->rx_irq = rx_irq;
-	ltq_port->err_irq = err_irq;
+	/* not all asc ports have clock gates, lets ignore the return code */
+	ltq_port->clk = clk_get(&pdev->dev, NULL);
 
-	lqasc_port[pdev->id] = ltq_port;
+	ltq_port->tx_irq = irqres[0].start;
+	ltq_port->rx_irq = irqres[1].start;
+	ltq_port->err_irq = irqres[2].start;
+
+	lqasc_port[line] = ltq_port;
 	platform_set_drvdata(pdev, ltq_port);
 
 	ret = uart_add_one_port(&lqasc_reg, port);
@@ -729,10 +741,17 @@ lqasc_probe(struct platform_device *pdev)
 	return ret;
 }
 
+static const struct of_device_id ltq_asc_match[] = {
+	{ .compatible = DRVNAME },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_asc_match);
+
 static struct platform_driver lqasc_driver = {
 	.driver		= {
 		.name	= DRVNAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = ltq_asc_match,
 	},
 };
 
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index 0be8a2f..f76b1688 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -31,6 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/major.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c
index 4001eee..92c00b2 100644
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -57,6 +57,7 @@
 #include <linux/ioport.h>
 #include <linux/irqflags.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/major.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
index a9593a3..2e74c3a 100644
--- a/drivers/watchdog/lantiq_wdt.c
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -13,14 +13,15 @@
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
-#include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/uaccess.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <lantiq.h>
+#include <lantiq_soc.h>
 
-/* Section 3.4 of the datasheet
+/*
+ * Section 3.4 of the datasheet
  * The password sequence protects the WDT control register from unintended
  * write actions, which might cause malfunction of the WDT.
  *
@@ -70,7 +71,8 @@ ltq_wdt_disable(void)
 {
 	/* write the first password magic */
 	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
-	/* write the second password magic with no config
+	/*
+	 * write the second password magic with no config
 	 * this turns the watchdog off
 	 */
 	ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR);
@@ -184,7 +186,7 @@ static struct miscdevice ltq_wdt_miscdev = {
 	.fops	= &ltq_wdt_fops,
 };
 
-static int __init
+static int __devinit
 ltq_wdt_probe(struct platform_device *pdev)
 {
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -194,28 +196,27 @@ ltq_wdt_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "cannot obtain I/O memory region");
 		return -ENOENT;
 	}
-	res = devm_request_mem_region(&pdev->dev, res->start,
-		resource_size(res), dev_name(&pdev->dev));
-	if (!res) {
-		dev_err(&pdev->dev, "cannot request I/O memory region");
-		return -EBUSY;
-	}
-	ltq_wdt_membase = devm_ioremap_nocache(&pdev->dev, res->start,
-		resource_size(res));
+
+	ltq_wdt_membase = devm_request_and_ioremap(&pdev->dev, res);
 	if (!ltq_wdt_membase) {
 		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
 		return -ENOMEM;
 	}
 
 	/* we do not need to enable the clock as it is always running */
-	clk = clk_get(&pdev->dev, "io");
-	WARN_ON(!clk);
+	clk = clk_get_io();
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Failed to get clock\n");
+		return -ENOENT;
+	}
 	ltq_io_region_clk_rate = clk_get_rate(clk);
 	clk_put(clk);
 
+	/* find out if the watchdog caused the last reboot */
 	if (ltq_reset_cause() == LTQ_RST_CAUSE_WDTRST)
 		ltq_wdt_bootstatus = WDIOF_CARDRESET;
 
+	dev_info(&pdev->dev, "Init done\n");
 	return misc_register(&ltq_wdt_miscdev);
 }
 
@@ -227,33 +228,26 @@ ltq_wdt_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id ltq_wdt_match[] = {
+	{ .compatible = "lantiq,wdt" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_wdt_match);
 
 static struct platform_driver ltq_wdt_driver = {
+	.probe = ltq_wdt_probe,
 	.remove = __devexit_p(ltq_wdt_remove),
 	.driver = {
-		.name = "ltq_wdt",
+		.name = "wdt",
 		.owner = THIS_MODULE,
+		.of_match_table = ltq_wdt_match,
 	},
 };
 
-static int __init
-init_ltq_wdt(void)
-{
-	return platform_driver_probe(&ltq_wdt_driver, ltq_wdt_probe);
-}
-
-static void __exit
-exit_ltq_wdt(void)
-{
-	return platform_driver_unregister(&ltq_wdt_driver);
-}
-
-module_init(init_ltq_wdt);
-module_exit(exit_ltq_wdt);
+module_platform_driver(ltq_wdt_driver);
 
 module_param(nowayout, bool, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
-
 MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
 MODULE_DESCRIPTION("Lantiq SoC Watchdog");
 MODULE_LICENSE("GPL");