diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/pci/pci.c | 5 | ||||
-rw-r--r-- | drivers/pci/quirks.c | 26 | ||||
-rw-r--r-- | drivers/usb/core/hcd-pci.c | 9 | ||||
-rw-r--r-- | drivers/usb/host/ehci-pci.c | 8 |
4 files changed, 31 insertions, 17 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 447e834..77cb54a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1744,6 +1744,11 @@ int pci_prepare_to_sleep(struct pci_dev *dev) if (target_state == PCI_POWER_ERROR) return -EIO; + /* Some devices mustn't be in D3 during system sleep */ + if (target_state == PCI_D3hot && + (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)) + return 0; + pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev)); error = pci_set_power_state(dev, target_state); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 2a75216..194b243a 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2929,6 +2929,32 @@ static void __devinit disable_igfx_irq(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); +/* + * The Intel 6 Series/C200 Series chipset's EHCI controllers on many + * ASUS motherboards will cause memory corruption or a system crash + * if they are in D3 while the system is put into S3 sleep. + */ +static void __devinit asus_ehci_no_d3(struct pci_dev *dev) +{ + const char *sys_info; + static const char good_Asus_board[] = "P8Z68-V"; + + if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP) + return; + if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK) + return; + sys_info = dmi_get_system_info(DMI_BOARD_NAME); + if (sys_info && memcmp(sys_info, good_Asus_board, + sizeof(good_Asus_board) - 1) == 0) + return; + + dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n"); + dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP; + device_set_wakeup_capable(&dev->dev, false); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3); + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 57ed9e4..622b4a4 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -493,15 +493,6 @@ static int hcd_pci_suspend_noirq(struct device *dev) pci_save_state(pci_dev); - /* - * Some systems crash if an EHCI controller is in D3 during - * a sleep transition. We have to leave such controllers in D0. - */ - if (hcd->broken_pci_sleep) { - dev_dbg(dev, "Staying in PCI D0\n"); - return retval; - } - /* If the root hub is dead rather than suspended, disallow remote * wakeup. usb_hc_died() should ensure that both hosts are marked as * dying, so we only need to check the primary roothub. diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bc94d7b..1234817 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -144,14 +144,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) hcd->has_tt = 1; tdi_reset(ehci); } - if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) { - /* EHCI #1 or #2 on 6 Series/C200 Series chipset */ - if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) { - ehci_info(ehci, "broken D3 during system sleep on ASUS\n"); - hcd->broken_pci_sleep = 1; - device_set_wakeup_capable(&pdev->dev, false); - } - } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { |