diff options
Diffstat (limited to 'drivers')
380 files changed, 10791 insertions, 3533 deletions
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 8a5bf3b..55b5b90 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -395,7 +395,7 @@ struct pci_dev *acpi_get_pci_dev(acpi_handle handle) fn = adr & 0xffff; pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn)); - if (hnd == handle) + if (!pdev || hnd == handle) break; pbus = pdev->subordinate; diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 3d763fd..f60b2b6 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -204,9 +204,20 @@ static void amba_device_release(struct device *dev) int amba_device_register(struct amba_device *dev, struct resource *parent) { u32 pid, cid; + u32 size; void __iomem *tmp; int i, ret; + device_initialize(&dev->dev); + + /* + * Copy from device_add + */ + if (dev->dev.init_name) { + dev_set_name(&dev->dev, "%s", dev->dev.init_name); + dev->dev.init_name = NULL; + } + dev->dev.release = amba_device_release; dev->dev.bus = &amba_bustype; dev->dev.dma_mask = &dev->dma_mask; @@ -219,16 +230,25 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) if (ret) goto err_out; - tmp = ioremap(dev->res.start, SZ_4K); + /* + * Dynamically calculate the size of the resource + * and use this for iomap + */ + size = resource_size(&dev->res); + tmp = ioremap(dev->res.start, size); if (!tmp) { ret = -ENOMEM; goto err_release; } + /* + * Read pid and cid based on size of resource + * they are located at end of region + */ for (pid = 0, i = 0; i < 4; i++) - pid |= (readl(tmp + 0xfe0 + 4 * i) & 255) << (i * 8); + pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8); for (cid = 0, i = 0; i < 4; i++) - cid |= (readl(tmp + 0xff0 + 4 * i) & 255) << (i * 8); + cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8); iounmap(tmp); @@ -240,7 +260,7 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) goto err_release; } - ret = device_register(&dev->dev); + ret = device_add(&dev->dev); if (ret) goto err_release; @@ -343,11 +363,14 @@ amba_find_device(const char *busid, struct device *parent, unsigned int id, int amba_request_regions(struct amba_device *dev, const char *name) { int ret = 0; + u32 size; if (!name) name = dev->dev.driver->name; - if (!request_mem_region(dev->res.start, SZ_4K, name)) + size = resource_size(&dev->res); + + if (!request_mem_region(dev->res.start, size, name)) ret = -EBUSY; return ret; @@ -361,7 +384,10 @@ int amba_request_regions(struct amba_device *dev, const char *name) */ void amba_release_regions(struct amba_device *dev) { - release_mem_region(dev->res.start, SZ_4K); + u32 size; + + size = resource_size(&dev->res); + release_mem_region(dev->res.start, size); } EXPORT_SYMBOL(amba_driver_register); diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index ddeb819..fc46653 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -357,7 +357,7 @@ static void fw_dev_release(struct device *dev) kfree(fw_priv->pages); kfree(fw_priv->fw_id); kfree(fw_priv); - put_device(dev); + kfree(dev); module_put(THIS_MODULE); } @@ -408,13 +408,11 @@ static int fw_register_device(struct device **dev_p, const char *fw_name, if (retval) { dev_err(device, "%s: device_register failed\n", __func__); put_device(f_dev); - goto error_kfree_fw_id; + return retval; } *dev_p = f_dev; return 0; -error_kfree_fw_id: - kfree(fw_priv->fw_id); error_kfree: kfree(f_dev); kfree(fw_priv); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index fae7254..58a3e57 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -762,6 +762,7 @@ static int dpm_prepare(pm_message_t state) dev->power.status = DPM_ON; if (error == -EAGAIN) { put_device(dev); + error = 0; continue; } printk(KERN_ERR "PM: Failed to prepare device %s " diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index bb72ada..1d886e0 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -298,6 +298,22 @@ config BLK_DEV_NBD If unsure, say N. +config BLK_DEV_OSD + tristate "OSD object-as-blkdev support" + depends on SCSI_OSD_ULD + ---help--- + Saying Y or M here will allow the exporting of a single SCSI + OSD (object-based storage) object as a Linux block device. + + For example, if you create a 2G object on an OSD device, + you can then use this module to present that 2G object as + a Linux block device. + + To compile this driver as a module, choose M here: the + module will be called osdblk. + + If unsure, say N. + config BLK_DEV_SX8 tristate "Promise SATA SX8 support" depends on PCI diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 7755a5e..cdaa3f8 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_XILINX_SYSACE) += xsysace.o obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o obj-$(CONFIG_MG_DISK) += mg_disk.o obj-$(CONFIG_SUNVDC) += sunvdc.o +obj-$(CONFIG_BLK_DEV_OSD) += osdblk.o obj-$(CONFIG_BLK_DEV_UMEM) += umem.o obj-$(CONFIG_BLK_DEV_NBD) += nbd.o diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index 9c6e5b0..2f07b7c 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1645,7 +1645,7 @@ static int __init fd_probe_drives(void) { int drive,drives,nomem; - printk(KERN_INFO "FD: probing units\n" KERN_INFO "found "); + printk(KERN_INFO "FD: probing units\nfound "); drives=0; nomem=0; for(drive=0;drive<FD_MAX_UNITS;drive++) { diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index c7a527c..65a0655 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -226,8 +226,18 @@ static inline void addQ(struct hlist_head *list, CommandList_struct *c) static inline void removeQ(CommandList_struct *c) { - if (WARN_ON(hlist_unhashed(&c->list))) + /* + * After kexec/dump some commands might still + * be in flight, which the firmware will try + * to complete. Resetting the firmware doesn't work + * with old fw revisions, so we have to mark + * them off as 'stale' to prevent the driver from + * falling over. + */ + if (WARN_ON(hlist_unhashed(&c->list))) { + c->cmd_type = CMD_MSG_STALE; return; + } hlist_del_init(&c->list); } @@ -4246,7 +4256,8 @@ static void fail_all_cmds(unsigned long ctlr) while (!hlist_empty(&h->cmpQ)) { c = hlist_entry(h->cmpQ.first, CommandList_struct, list); removeQ(c); - c->err_info->CommandStatus = CMD_HARDWARE_ERR; + if (c->cmd_type != CMD_MSG_STALE) + c->err_info->CommandStatus = CMD_HARDWARE_ERR; if (c->cmd_type == CMD_RWREQ) { complete_command(h, c, 0); } else if (c->cmd_type == CMD_IOCTL_PEND) diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h index cd665b0..dbaed1e 100644 --- a/drivers/block/cciss_cmd.h +++ b/drivers/block/cciss_cmd.h @@ -274,6 +274,7 @@ typedef struct _ErrorInfo_struct { #define CMD_SCSI 0x03 #define CMD_MSG_DONE 0x04 #define CMD_MSG_TIMEOUT 0x05 +#define CMD_MSG_STALE 0xff /* This structure needs to be divisible by 8 for new * indexing method. diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 862b40c..91b7530 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3327,7 +3327,10 @@ static inline int set_geometry(unsigned int cmd, struct floppy_struct *g, if (!capable(CAP_SYS_ADMIN)) return -EPERM; mutex_lock(&open_lock); - LOCK_FDC(drive, 1); + if (lock_fdc(drive, 1)) { + mutex_unlock(&open_lock); + return -EINTR; + } floppy_type[type] = *g; floppy_type[type].name = "user format"; for (cnt = type << 2; cnt < (type << 2) + 4; cnt++) diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c new file mode 100644 index 0000000..13c1aee --- /dev/null +++ b/drivers/block/osdblk.c @@ -0,0 +1,701 @@ + +/* + osdblk.c -- Export a single SCSI OSD object as a Linux block device + + + Copyright 2009 Red Hat, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + + Instructions for use + -------------------- + + 1) Map a Linux block device to an existing OSD object. + + In this example, we will use partition id 1234, object id 5678, + OSD device /dev/osd1. + + $ echo "1234 5678 /dev/osd1" > /sys/class/osdblk/add + + + 2) List all active blkdev<->object mappings. + + In this example, we have performed step #1 twice, creating two blkdevs, + mapped to two separate OSD objects. + + $ cat /sys/class/osdblk/list + 0 174 1234 5678 /dev/osd1 + 1 179 1994 897123 /dev/osd0 + + The columns, in order, are: + - blkdev unique id + - blkdev assigned major + - OSD object partition id + - OSD object id + - OSD device + + + 3) Remove an active blkdev<->object mapping. + + In this example, we remove the mapping with blkdev unique id 1. + + $ echo 1 > /sys/class/osdblk/remove + + + NOTE: The actual creation and deletion of OSD objects is outside the scope + of this driver. + + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <scsi/osd_initiator.h> +#include <scsi/osd_attributes.h> +#include <scsi/osd_sec.h> +#include <scsi/scsi_device.h> + +#define DRV_NAME "osdblk" +#define PFX DRV_NAME ": " + +/* #define _OSDBLK_DEBUG */ +#ifdef _OSDBLK_DEBUG +#define OSDBLK_DEBUG(fmt, a...) \ + printk(KERN_NOTICE "osdblk @%s:%d: " fmt, __func__, __LINE__, ##a) +#else +#define OSDBLK_DEBUG(fmt, a...) \ + do { if (0) printk(fmt, ##a); } while (0) +#endif + +MODULE_AUTHOR("Jeff Garzik <jeff@garzik.org>"); +MODULE_DESCRIPTION("block device inside an OSD object osdblk.ko"); +MODULE_LICENSE("GPL"); + +struct osdblk_device; + +enum { + OSDBLK_MINORS_PER_MAJOR = 256, /* max minors per blkdev */ + OSDBLK_MAX_REQ = 32, /* max parallel requests */ + OSDBLK_OP_TIMEOUT = 4 * 60, /* sync OSD req timeout */ +}; + +struct osdblk_request { + struct request *rq; /* blk layer request */ + struct bio *bio; /* cloned bio */ + struct osdblk_device *osdev; /* associated blkdev */ +}; + +struct osdblk_device { + int id; /* blkdev unique id */ + + int major; /* blkdev assigned major */ + struct gendisk *disk; /* blkdev's gendisk and rq */ + struct request_queue *q; + + struct osd_dev *osd; /* associated OSD */ + + char name[32]; /* blkdev name, e.g. osdblk34 */ + + spinlock_t lock; /* queue lock */ + + struct osd_obj_id obj; /* OSD partition, obj id */ + uint8_t obj_cred[OSD_CAP_LEN]; /* OSD cred */ + + struct osdblk_request req[OSDBLK_MAX_REQ]; /* request table */ + + struct list_head node; + + char osd_path[0]; /* OSD device path */ +}; + +static struct class *class_osdblk; /* /sys/class/osdblk */ +static DEFINE_MUTEX(ctl_mutex); /* Serialize open/close/setup/teardown */ +static LIST_HEAD(osdblkdev_list); + +static struct block_device_operations osdblk_bd_ops = { + .owner = THIS_MODULE, +}; + +static const struct osd_attr g_attr_logical_length = ATTR_DEF( + OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8); + +static void osdblk_make_credential(u8 cred_a[OSD_CAP_LEN], + const struct osd_obj_id *obj) +{ + osd_sec_init_nosec_doall_caps(cred_a, obj, false, true); +} + +/* copied from exofs; move to libosd? */ +/* + * Perform a synchronous OSD operation. copied from exofs; move to libosd? + */ +static int osd_sync_op(struct osd_request *or, int timeout, uint8_t *credential) +{ + int ret; + + or->timeout = timeout; + ret = osd_finalize_request(or, 0, credential, NULL); + if (ret) + return ret; + + ret = osd_execute_request(or); + + /* osd_req_decode_sense(or, ret); */ + return ret; +} + +/* + * Perform an asynchronous OSD operation. copied from exofs; move to libosd? + */ +static int osd_async_op(struct osd_request *or, osd_req_done_fn *async_done, + void *caller_context, u8 *cred) +{ + int ret; + + ret = osd_finalize_request(or, 0, cred, NULL); + if (ret) + return ret; + + ret = osd_execute_request_async(or, async_done, caller_context); + + return ret; +} + +/* copied from exofs; move to libosd? */ +static int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr) +{ + struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */ + void *iter = NULL; + int nelem; + + do { + nelem = 1; + osd_req_decode_get_attr_list(or, &cur_attr, &nelem, &iter); + if ((cur_attr.attr_page == attr->attr_page) && + (cur_attr.attr_id == attr->attr_id)) { + attr->len = cur_attr.len; + attr->val_ptr = cur_attr.val_ptr; + return 0; + } + } while (iter); + + return -EIO; +} + +static int osdblk_get_obj_size(struct osdblk_device *osdev, u64 *size_out) +{ + struct osd_request *or; + struct osd_attr attr; + int ret; + + /* start request */ + or = osd_start_request(osdev->osd, GFP_KERNEL); + if (!or) + return -ENOMEM; + + /* create a get-attributes(length) request */ + osd_req_get_attributes(or, &osdev->obj); + + osd_req_add_get_attr_list(or, &g_attr_logical_length, 1); + + /* execute op synchronously */ + ret = osd_sync_op(or, OSDBLK_OP_TIMEOUT, osdev->obj_cred); + if (ret) + goto out; + + /* extract length from returned attribute info */ + attr = g_attr_logical_length; + ret = extract_attr_from_req(or, &attr); + if (ret) + goto out; + + *size_out = get_unaligned_be64(attr.val_ptr); + +out: + osd_end_request(or); + return ret; + +} + +static void osdblk_osd_complete(struct osd_request *or, void *private) +{ + struct osdblk_request *orq = private; + struct osd_sense_info osi; + int ret = osd_req_decode_sense(or, &osi); + + if (ret) { + ret = -EIO; + OSDBLK_DEBUG("osdblk_osd_complete with err=%d\n", ret); + } + + /* complete OSD request */ + osd_end_request(or); + + /* complete request passed to osdblk by block layer */ + __blk_end_request_all(orq->rq, ret); +} + +static void bio_chain_put(struct bio *chain) +{ + struct bio *tmp; + + while (chain) { + tmp = chain; + chain = chain->bi_next; + + bio_put(tmp); + } +} + +static struct bio *bio_chain_clone(struct bio *old_chain, gfp_t gfpmask) +{ + struct bio *tmp, *new_chain = NULL, *tail = NULL; + + while (old_chain) { + tmp = bio_kmalloc(gfpmask, old_chain->bi_max_vecs); + if (!tmp) + goto err_out; + + __bio_clone(tmp, old_chain); + tmp->bi_bdev = NULL; + gfpmask &= ~__GFP_WAIT; + tmp->bi_next = NULL; + + if (!new_chain) + new_chain = tail = tmp; + else { + tail->bi_next = tmp; + tail = tmp; + } + + old_chain = old_chain->bi_next; + } + + return new_chain; + +err_out: + OSDBLK_DEBUG("bio_chain_clone with err\n"); + bio_chain_put(new_chain); + return NULL; +} + +static void osdblk_rq_fn(struct request_queue *q) +{ + struct osdblk_device *osdev = q->queuedata; + + while (1) { + struct request *rq; + struct osdblk_request *orq; + struct osd_request *or; + struct bio *bio; + bool do_write, do_flush; + + /* peek at request from block layer */ + rq = blk_fetch_request(q); + if (!rq) + break; + + /* filter out block requests we don't understand */ + if (!blk_fs_request(rq) && !blk_barrier_rq(rq)) { + blk_end_request_all(rq, 0); + continue; + } + + /* deduce our operation (read, write, flush) */ + /* I wish the block layer simplified cmd_type/cmd_flags/cmd[] + * into a clearly defined set of RPC commands: + * read, write, flush, scsi command, power mgmt req, + * driver-specific, etc. + */ + + do_flush = (rq->special == (void *) 0xdeadbeefUL); + do_write = (rq_data_dir(rq) == WRITE); + + if (!do_flush) { /* osd_flush does not use a bio */ + /* a bio clone to be passed down to OSD request */ + bio = bio_chain_clone(rq->bio, GFP_ATOMIC); + if (!bio) + break; + } else + bio = NULL; + + /* alloc internal OSD request, for OSD command execution */ + or = osd_start_request(osdev->osd, GFP_ATOMIC); + if (!or) { + bio_chain_put(bio); + OSDBLK_DEBUG("osd_start_request with err\n"); + break; + } + + orq = &osdev->req[rq->tag]; + orq->rq = rq; + orq->bio = bio; + orq->osdev = osdev; + + /* init OSD command: flush, write or read */ + if (do_flush) + osd_req_flush_object(or, &osdev->obj, + OSD_CDB_FLUSH_ALL, 0, 0); + else if (do_write) + osd_req_write(or, &osdev->obj, blk_rq_pos(rq) * 512ULL, + bio, blk_rq_bytes(rq)); + else + osd_req_read(or, &osdev->obj, blk_rq_pos(rq) * 512ULL, + bio, blk_rq_bytes(rq)); + + OSDBLK_DEBUG("%s 0x%x bytes at 0x%llx\n", + do_flush ? "flush" : do_write ? + "write" : "read", blk_rq_bytes(rq), + blk_rq_pos(rq) * 512ULL); + + /* begin OSD command execution */ + if (osd_async_op(or, osdblk_osd_complete, orq, + osdev->obj_cred)) { + osd_end_request(or); + blk_requeue_request(q, rq); + bio_chain_put(bio); + OSDBLK_DEBUG("osd_execute_request_async with err\n"); + break; + } + + /* remove the special 'flush' marker, now that the command + * is executing + */ + rq->special = NULL; + } +} + +static void osdblk_prepare_flush(struct request_queue *q, struct request *rq) +{ + /* add driver-specific marker, to indicate that this request + * is a flush command + */ + rq->special = (void *) 0xdeadbeefUL; +} + +static void osdblk_free_disk(struct osdblk_device *osdev) +{ + struct gendisk *disk = osdev->disk; + + if (!disk) + return; + + if (disk->flags & GENHD_FL_UP) + del_gendisk(disk); + if (disk->queue) + blk_cleanup_queue(disk->queue); + put_disk(disk); +} + +static int osdblk_init_disk(struct osdblk_device *osdev) +{ + struct gendisk *disk; + struct request_queue *q; + int rc; + u64 obj_size = 0; + + /* contact OSD, request size info about the object being mapped */ + rc = osdblk_get_obj_size(osdev, &obj_size); + if (rc) + return rc; + + /* create gendisk info */ + disk = alloc_disk(OSDBLK_MINORS_PER_MAJOR); + if (!disk) + return -ENOMEM; + + sprintf(disk->disk_name, DRV_NAME "%d", osdev->id); + disk->major = osdev->major; + disk->first_minor = 0; + disk->fops = &osdblk_bd_ops; + disk->private_data = osdev; + + /* init rq */ + q = blk_init_queue(osdblk_rq_fn, &osdev->lock); + if (!q) { + put_disk(disk); + return -ENOMEM; + } + + /* switch queue to TCQ mode; allocate tag map */ + rc = blk_queue_init_tags(q, OSDBLK_MAX_REQ, NULL); + if (rc) { + blk_cleanup_queue(q); + put_disk(disk); + return rc; + } + + /* Set our limits to the lower device limits, because osdblk cannot + * sleep when allocating a lower-request and therefore cannot be + * bouncing. + */ + blk_queue_stack_limits(q, osd_request_queue(osdev->osd)); + + blk_queue_prep_rq(q, blk_queue_start_tag); + blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush); + + disk->queue = q; + + q->queuedata = osdev; + + osdev->disk = disk; + osdev->q = q; + + /* finally, announce the disk to the world */ + set_capacity(disk, obj_size / 512ULL); + add_disk(disk); + + printk(KERN_INFO "%s: Added of size 0x%llx\n", + disk->disk_name, (unsigned long long)obj_size); + + return 0; +} + +/******************************************************************** + * /sys/class/osdblk/ + * add map OSD object to blkdev + * remove unmap OSD object + * list show mappings + *******************************************************************/ + +static void class_osdblk_release(struct class *cls) +{ + kfree(cls); +} + +static ssize_t class_osdblk_list(struct class *c, char *data) +{ + int n = 0; + struct list_head *tmp; + + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + + list_for_each(tmp, &osdblkdev_list) { + struct osdblk_device *osdev; + + osdev = list_entry(tmp, struct osdblk_device, node); + + n += sprintf(data+n, "%d %d %llu %llu %s\n", + osdev->id, + osdev->major, + osdev->obj.partition, + osdev->obj.id, + osdev->osd_path); + } + + mutex_unlock(&ctl_mutex); + return n; +} + +static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count) +{ + struct osdblk_device *osdev; + ssize_t rc; + int irc, new_id = 0; + struct list_head *tmp; + + if (!try_module_get(THIS_MODULE)) + return -ENODEV; + + /* new osdblk_device object */ + osdev = kzalloc(sizeof(*osdev) + strlen(buf) + 1, GFP_KERNEL); + if (!osdev) { + rc = -ENOMEM; + goto err_out_mod; + } + + /* static osdblk_device initialization */ + spin_lock_init(&osdev->lock); + INIT_LIST_HEAD(&osdev->node); + + /* generate unique id: find highest unique id, add one */ + + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + + list_for_each(tmp, &osdblkdev_list) { + struct osdblk_device *osdev; + + osdev = list_entry(tmp, struct osdblk_device, node); + if (osdev->id > new_id) + new_id = osdev->id + 1; + } + + osdev->id = new_id; + + /* add to global list */ + list_add_tail(&osdev->node, &osdblkdev_list); + + mutex_unlock(&ctl_mutex); + + /* parse add command */ + if (sscanf(buf, "%llu %llu %s", &osdev->obj.partition, &osdev->obj.id, + osdev->osd_path) != 3) { + rc = -EINVAL; + goto err_out_slot; + } + + /* initialize rest of new object */ + sprintf(osdev->name, DRV_NAME "%d", osdev->id); + + /* contact requested OSD */ + osdev->osd = osduld_path_lookup(osdev->osd_path); + if (IS_ERR(osdev->osd)) { + rc = PTR_ERR(osdev->osd); + goto err_out_slot; + } + + /* build OSD credential */ + osdblk_make_credential(osdev->obj_cred, &osdev->obj); + + /* register our block device */ + irc = register_blkdev(0, osdev->name); + if (irc < 0) { + rc = irc; + goto err_out_osd; + } + + osdev->major = irc; + + /* set up and announce blkdev mapping */ + rc = osdblk_init_disk(osdev); + if (rc) + goto err_out_blkdev; + + return count; + +err_out_blkdev: + unregister_blkdev(osdev->major, osdev->name); +err_out_osd: + osduld_put_device(osdev->osd); +err_out_slot: + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + list_del_init(&osdev->node); + mutex_unlock(&ctl_mutex); + + kfree(osdev); +err_out_mod: + OSDBLK_DEBUG("Error adding device %s\n", buf); + module_put(THIS_MODULE); + return rc; +} + +static ssize_t class_osdblk_remove(struct class *c, const char *buf, + size_t count) +{ + struct osdblk_device *osdev = NULL; + int target_id, rc; + unsigned long ul; + struct list_head *tmp; + + rc = strict_strtoul(buf, 10, &ul); + if (rc) + return rc; + + /* convert to int; abort if we lost anything in the conversion */ + target_id = (int) ul; + if (target_id != ul) + return -EINVAL; + + /* remove object from list immediately */ + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + + list_for_each(tmp, &osdblkdev_list) { + osdev = list_entry(tmp, struct osdblk_device, node); + if (osdev->id == target_id) { + list_del_init(&osdev->node); + break; + } + osdev = NULL; + } + + mutex_unlock(&ctl_mutex); + + if (!osdev) + return -ENOENT; + + /* clean up and free blkdev and associated OSD connection */ + osdblk_free_disk(osdev); + unregister_blkdev(osdev->major, osdev->name); + osduld_put_device(osdev->osd); + kfree(osdev); + + /* release module ref */ + module_put(THIS_MODULE); + + return count; +} + +static struct class_attribute class_osdblk_attrs[] = { + __ATTR(add, 0200, NULL, class_osdblk_add), + __ATTR(remove, 0200, NULL, class_osdblk_remove), + __ATTR(list, 0444, class_osdblk_list, NULL), + __ATTR_NULL +}; + +static int osdblk_sysfs_init(void) +{ + int ret = 0; + + /* + * create control files in sysfs + * /sys/class/osdblk/... + */ + class_osdblk = kzalloc(sizeof(*class_osdblk), GFP_KERNEL); + if (!class_osdblk) + return -ENOMEM; + + class_osdblk->name = DRV_NAME; + class_osdblk->owner = THIS_MODULE; + class_osdblk->class_release = class_osdblk_release; + class_osdblk->class_attrs = class_osdblk_attrs; + + ret = class_register(class_osdblk); + if (ret) { + kfree(class_osdblk); + class_osdblk = NULL; + printk(PFX "failed to create class osdblk\n"); + return ret; + } + + return 0; +} + +static void osdblk_sysfs_cleanup(void) +{ + if (class_osdblk) + class_destroy(class_osdblk); + class_osdblk = NULL; +} + +static int __init osdblk_init(void) +{ + int rc; + + rc = osdblk_sysfs_init(); + if (rc) + return rc; + + return 0; +} + +static void __exit osdblk_exit(void) +{ + osdblk_sysfs_cleanup(); +} + +module_init(osdblk_init); +module_exit(osdblk_exit); + diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 83650e0..99a506f 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -1372,8 +1372,10 @@ try_next_bio: wakeup = (pd->write_congestion_on > 0 && pd->bio_queue_size <= pd->write_congestion_off); spin_unlock(&pd->lock); - if (wakeup) - clear_bdi_congested(&pd->disk->queue->backing_dev_info, WRITE); + if (wakeup) { + clear_bdi_congested(&pd->disk->queue->backing_dev_info, + BLK_RW_ASYNC); + } pkt->sleep_time = max(PACKET_WAIT_TIME, 1); pkt_set_state(pkt, PACKET_WAITING_STATE); @@ -2592,10 +2594,10 @@ static int pkt_make_request(struct request_queue *q, struct bio *bio) spin_lock(&pd->lock); if (pd->write_congestion_on > 0 && pd->bio_queue_size >= pd->write_congestion_on) { - set_bdi_congested(&q->backing_dev_info, WRITE); + set_bdi_congested(&q->backing_dev_info, BLK_RW_ASYNC); do { spin_unlock(&pd->lock); - congestion_wait(WRITE, HZ); + congestion_wait(BLK_RW_ASYNC, HZ); spin_lock(&pd->lock); } while(pd->bio_queue_size > pd->write_congestion_off); } diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index f08491a..b20abe10 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -390,9 +390,10 @@ static inline void ace_dump_mem(void *base, int len) static void ace_dump_regs(struct ace_device *ace) { - dev_info(ace->dev, " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n" - KERN_INFO " status:%.8x mpu_lba:%.8x busmode:%4x\n" - KERN_INFO " error: %.8x cfg_lba:%.8x fatstat:%.4x\n", + dev_info(ace->dev, + " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n" + " status:%.8x mpu_lba:%.8x busmode:%4x\n" + " error: %.8x cfg_lba:%.8x fatstat:%.4x\n", ace_in32(ace, ACE_CTRL), ace_in(ace, ACE_SECCNTCMD), ace_in(ace, ACE_VERSION), diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 0bd01f4..6a06913 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -1029,10 +1029,6 @@ config CS5535_GPIO If compiled as a module, it will be called cs5535_gpio. -config GPIO_VR41XX - tristate "NEC VR4100 series General-purpose I/O Unit support" - depends on CPU_VR41XX - config RAW_DRIVER tristate "RAW driver (/dev/raw/rawN)" depends on BLOCK diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 189efcf..66f779a 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -95,7 +95,6 @@ obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o -obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o obj-$(CONFIG_GPIO_TB0219) += tb0219.o obj-$(CONFIG_TELCLOCK) += tlclk.o diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c index 140ea10..c02db01f7 100644 --- a/drivers/char/bsr.c +++ b/drivers/char/bsr.c @@ -27,6 +27,7 @@ #include <linux/cdev.h> #include <linux/list.h> #include <linux/mm.h> +#include <asm/pgtable.h> #include <asm/io.h> /* @@ -75,12 +76,13 @@ static struct class *bsr_class; static int bsr_major; enum { - BSR_8 = 0, - BSR_16 = 1, - BSR_64 = 2, - BSR_128 = 3, - BSR_UNKNOWN = 4, - BSR_MAX = 5, + BSR_8 = 0, + BSR_16 = 1, + BSR_64 = 2, + BSR_128 = 3, + BSR_4096 = 4, + BSR_UNKNOWN = 5, + BSR_MAX = 6, }; static unsigned bsr_types[BSR_MAX]; @@ -117,15 +119,22 @@ static int bsr_mmap(struct file *filp, struct vm_area_struct *vma) { unsigned long size = vma->vm_end - vma->vm_start; struct bsr_dev *dev = filp->private_data; + int ret; - if (size > dev->bsr_len || (size & (PAGE_SIZE-1))) - return -EINVAL; - - vma->vm_flags |= (VM_IO | VM_DONTEXPAND); vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT, - size, vma->vm_page_prot)) + /* check for the case of a small BSR device and map one 4k page for it*/ + if (dev->bsr_len < PAGE_SIZE && size == PAGE_SIZE) + ret = remap_4k_pfn(vma, vma->vm_start, dev->bsr_addr >> 12, + vma->vm_page_prot); + else if (size <= dev->bsr_len) + ret = io_remap_pfn_range(vma, vma->vm_start, + dev->bsr_addr >> PAGE_SHIFT, + size, vma->vm_page_prot); + else + return -EINVAL; + + if (ret) return -EAGAIN; return 0; @@ -205,6 +214,11 @@ static int bsr_add_node(struct device_node *bn) cur->bsr_stride = bsr_stride[i]; cur->bsr_dev = MKDEV(bsr_major, i + total_bsr_devs); + /* if we have a bsr_len of > 4k and less then PAGE_SIZE (64k pages) */ + /* we can only map 4k of it, so only advertise the 4k in sysfs */ + if (cur->bsr_len > 4096 && cur->bsr_len < PAGE_SIZE) + cur->bsr_len = 4096; + switch(cur->bsr_bytes) { case 8: cur->bsr_type = BSR_8; @@ -218,9 +232,11 @@ static int bsr_add_node(struct device_node *bn) case 128: cur->bsr_type = BSR_128; break; + case 4096: + cur->bsr_type = BSR_4096; + break; default: cur->bsr_type = BSR_UNKNOWN; - printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes); } cur->bsr_num = bsr_types[cur->bsr_type]; diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 5dcbe60..91b53eb 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -305,10 +305,11 @@ static int __init intel_init_hw_struct(struct intel_rng_hw *intel_rng_hw, (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK)) == BIOS_CNTL_LOCK_ENABLE_MASK) { static __initdata /*const*/ char warning[] = - KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n" - KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n" - KERN_WARNING PFX "you are certain that your system has a functional\n" - KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n"; + KERN_WARNING +PFX "Firmware space is locked read-only. If you can't or\n" +PFX "don't want to disable this in firmware setup, and if\n" +PFX "you are certain that your system has a functional\n" +PFX "RNG, try using the 'no_fwh_detect' option.\n"; if (no_fwh_detect) return -ENODEV; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 4159292..621d118 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -1478,10 +1478,10 @@ static int __devinit load_firmware(struct pci_dev *pdev, status = inw(base + 0x4); if (status != 0) { dev_warn(&pdev->dev, "Card%d rejected load header:\n" - KERN_WARNING "Address:0x%x\n" - KERN_WARNING "Count:0x%x\n" - KERN_WARNING "Status:0x%x\n", - index + 1, frame->addr, frame->count, status); + "Address:0x%x\n" + "Count:0x%x\n" + "Status:0x%x\n", + index + 1, frame->addr, frame->count, status); goto errrelfw; } outsw(base, frame->data, word_count); @@ -1526,10 +1526,10 @@ static int __devinit load_firmware(struct pci_dev *pdev, status = inw(base + 0x4); if (status != 0) { dev_warn(&pdev->dev, "Card%d rejected verify header:\n" - KERN_WARNING "Address:0x%x\n" - KERN_WARNING "Count:0x%x\n" - KERN_WARNING "Status: 0x%x\n", - index + 1, frame->addr, frame->count, status); + "Address:0x%x\n" + "Count:0x%x\n" + "Status: 0x%x\n", + index + 1, frame->addr, frame->count, status); goto errrelfw; } diff --git a/drivers/char/pty.c b/drivers/char/pty.c index daebe1b..9d1b4f5 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -75,114 +75,88 @@ static void pty_close(struct tty_struct *tty, struct file *filp) */ static void pty_unthrottle(struct tty_struct *tty) { - struct tty_struct *o_tty = tty->link; - - if (!o_tty) - return; - - tty_wakeup(o_tty); + tty_wakeup(tty->link); set_bit(TTY_THROTTLED, &tty->flags); } -/* - * WSH 05/24/97: modified to - * (1) use space in tty->flip instead of a shared temp buffer - * The flip buffers aren't being used for a pty, so there's lots - * of space available. The buffer is protected by a per-pty - * semaphore that should almost never come under contention. - * (2) avoid redundant copying for cases where count >> receive_room - * N.B. Calls from user space may now return an error code instead of - * a count. +/** + * pty_space - report space left for writing + * @to: tty we are writing into * - * FIXME: Our pty_write method is called with our ldisc lock held but - * not our partners. We can't just wait on the other one blindly without - * risking deadlocks. At some point when everything has settled down we need - * to look into making pty_write at least able to sleep over an ldisc change. + * The tty buffers allow 64K but we sneak a peak and clip at 8K this + * allows a lot of overspill room for echo and other fun messes to + * be handled properly + */ + +static int pty_space(struct tty_struct *to) +{ + int n = 8192 - to->buf.memory_used; + if (n < 0) + return 0; + return n; +} + +/** + * pty_write - write to a pty + * @tty: the tty we write from + * @buf: kernel buffer of data + * @count: bytes to write * - * The return on no ldisc is a bit counter intuitive but the logic works - * like this. During an ldisc change the other end will flush its buffers. We - * thus return the full length which is identical to the case where we had - * proper locking and happened to queue the bytes just before the flush during - * the ldisc change. + * Our "hardware" write method. Data is coming from the ldisc which + * may be in a non sleeping state. We simply throw this at the other + * end of the link as if we were an IRQ handler receiving stuff for + * the other side of the pty/tty pair. */ + static int pty_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct tty_struct *to = tty->link; - struct tty_ldisc *ld; - int c = count; + int c; - if (!to || tty->stopped) + if (tty->stopped) return 0; - ld = tty_ldisc_ref(to); - - if (ld) { - c = to->receive_room; - if (c > count) - c = count; - ld->ops->receive_buf(to, buf, NULL, c); - tty_ldisc_deref(ld); + + /* This isn't locked but our 8K is quite sloppy so no + big deal */ + + c = pty_space(to); + if (c > count) + c = count; + if (c > 0) { + /* Stuff the data into the input queue of the other end */ + c = tty_insert_flip_string(to, buf, c); + /* And shovel */ + tty_flip_buffer_push(to); + tty_wakeup(tty); } return c; } +/** + * pty_write_room - write space + * @tty: tty we are writing from + * + * Report how many bytes the ldisc can send into the queue for + * the other device. + */ + static int pty_write_room(struct tty_struct *tty) { - struct tty_struct *to = tty->link; - - if (!to || tty->stopped) - return 0; - - return to->receive_room; + return pty_space(tty->link); } -/* - * WSH 05/24/97: Modified for asymmetric MASTER/SLAVE behavior - * The chars_in_buffer() value is used by the ldisc select() function - * to hold off writing when chars_in_buffer > WAKEUP_CHARS (== 256). - * The pty driver chars_in_buffer() Master/Slave must behave differently: - * - * The Master side needs to allow typed-ahead commands to accumulate - * while being canonicalized, so we report "our buffer" as empty until - * some threshold is reached, and then report the count. (Any count > - * WAKEUP_CHARS is regarded by select() as "full".) To avoid deadlock - * the count returned must be 0 if no canonical data is available to be - * read. (The N_TTY ldisc.chars_in_buffer now knows this.) +/** + * pty_chars_in_buffer - characters currently in our tx queue + * @tty: our tty * - * The Slave side passes all characters in raw mode to the Master side's - * buffer where they can be read immediately, so in this case we can - * return the true count in the buffer. + * Report how much we have in the transmit queue. As everything is + * instantly at the other end this is easy to implement. */ + static int pty_chars_in_buffer(struct tty_struct *tty) { - struct tty_struct *to = tty->link; - struct tty_ldisc *ld; - int count = 0; - - /* We should get the line discipline lock for "tty->link" */ - if (!to) - return 0; - /* We cannot take a sleeping reference here without deadlocking with - an ldisc change - but it doesn't really matter */ - ld = tty_ldisc_ref(to); - if (ld == NULL) - return 0; - - /* The ldisc must report 0 if no characters available to be read */ - if (ld->ops->chars_in_buffer) - count = ld->ops->chars_in_buffer(to); - - tty_ldisc_deref(ld); - - if (tty->driver->subtype == PTY_TYPE_SLAVE) - return count; - - /* Master side driver ... if the other side's read buffer is less than - * half full, return 0 to allow writers to proceed; otherwise return - * the count. This leaves a comfortable margin to avoid overflow, - * and still allows half a buffer's worth of typed-ahead commands. - */ - return (count < N_TTY_BUF_SIZE/2) ? 0 : count; + return 0; } /* Set the lock flag on a pty */ @@ -202,20 +176,10 @@ static void pty_flush_buffer(struct tty_struct *tty) { struct tty_struct *to = tty->link; unsigned long flags; - struct tty_ldisc *ld; if (!to) return; - ld = tty_ldisc_ref(to); - - /* The other end is changing discipline */ - if (!ld) - return; - - if (ld->ops->flush_buffer) - to->ldisc->ops->flush_buffer(to); - tty_ldisc_deref(ld); - + /* tty_buffer_flush(to); FIXME */ if (to->packet) { spin_lock_irqsave(&tty->ctrl_lock, flags); tty->ctrl_status |= TIOCPKT_FLUSHWRITE; diff --git a/drivers/char/tb0219.c b/drivers/char/tb0219.c index 6062b62..b3ec9b1 100644 --- a/drivers/char/tb0219.c +++ b/drivers/char/tb0219.c @@ -1,7 +1,7 @@ /* * Driver for TANBAC TB0219 base board. * - * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,7 +28,7 @@ #include <asm/vr41xx/giu.h> #include <asm/vr41xx/tb0219.h> -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); MODULE_DESCRIPTION("TANBAC TB0219 base board driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index a19e935..913aa8d 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -867,15 +867,22 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_wait_idle(tty); /* - * Shutdown the current line discipline, and reset it to N_TTY. - * - * FIXME: this MUST get fixed for the new reflocking + * Now kill off the ldisc */ + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + /* Force an oops if we mess this up */ + tty->ldisc = NULL; + + /* Ensure the next open requests the N_TTY ldisc */ + tty_set_termios_ldisc(tty, N_TTY); - tty_ldisc_reinit(tty); /* This will need doing differently if we need to lock */ if (o_tty) tty_ldisc_release(o_tty, NULL); + + /* And the memory resources remaining (buffers, termios) will be + disposed of when the kref hits zero */ } /** diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c index 54c8372..e69de29 100644 --- a/drivers/char/vr41xx_giu.c +++ b/drivers/char/vr41xx_giu.c @@ -1,680 +0,0 @@ -/* - * Driver for NEC VR4100 series General-purpose I/O Unit. - * - * Copyright (C) 2002 MontaVista Software Inc. - * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com> - * Copyright (C) 2003-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/smp_lock.h> -#include <linux/spinlock.h> -#include <linux/types.h> - -#include <asm/io.h> -#include <asm/vr41xx/giu.h> -#include <asm/vr41xx/irq.h> -#include <asm/vr41xx/vr41xx.h> - -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); -MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver"); -MODULE_LICENSE("GPL"); - -static int major; /* default is dynamic major device number */ -module_param(major, int, 0); -MODULE_PARM_DESC(major, "Major device number"); - -#define GIUIOSELL 0x00 -#define GIUIOSELH 0x02 -#define GIUPIODL 0x04 -#define GIUPIODH 0x06 -#define GIUINTSTATL 0x08 -#define GIUINTSTATH 0x0a -#define GIUINTENL 0x0c -#define GIUINTENH 0x0e -#define GIUINTTYPL 0x10 -#define GIUINTTYPH 0x12 -#define GIUINTALSELL 0x14 -#define GIUINTALSELH 0x16 -#define GIUINTHTSELL 0x18 -#define GIUINTHTSELH 0x1a -#define GIUPODATL 0x1c -#define GIUPODATEN 0x1c -#define GIUPODATH 0x1e - #define PIOEN0 0x0100 - #define PIOEN1 0x0200 -#define GIUPODAT 0x1e -#define GIUFEDGEINHL 0x20 -#define GIUFEDGEINHH 0x22 -#define GIUREDGEINHL 0x24 -#define GIUREDGEINHH 0x26 - -#define GIUUSEUPDN 0x1e0 -#define GIUTERMUPDN 0x1e2 - -#define GPIO_HAS_PULLUPDOWN_IO 0x0001 -#define GPIO_HAS_OUTPUT_ENABLE 0x0002 -#define GPIO_HAS_INTERRUPT_EDGE_SELECT 0x0100 - -static spinlock_t giu_lock; -static unsigned long giu_flags; -static unsigned int giu_nr_pins; - -static void __iomem *giu_base; - -#define giu_read(offset) readw(giu_base + (offset)) -#define giu_write(offset, value) writew((value), giu_base + (offset)) - -#define GPIO_PIN_OF_IRQ(irq) ((irq) - GIU_IRQ_BASE) -#define GIUINT_HIGH_OFFSET 16 -#define GIUINT_HIGH_MAX 32 - -static inline uint16_t giu_set(uint16_t offset, uint16_t set) -{ - uint16_t data; - - data = giu_read(offset); - data |= set; - giu_write(offset, data); - - return data; -} - -static inline uint16_t giu_clear(uint16_t offset, uint16_t clear) -{ - uint16_t data; - - data = giu_read(offset); - data &= ~clear; - giu_write(offset, data); - - return data; -} - -static void ack_giuint_low(unsigned int irq) -{ - giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(irq)); -} - -static void mask_giuint_low(unsigned int irq) -{ - giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); -} - -static void mask_ack_giuint_low(unsigned int irq) -{ - unsigned int pin; - - pin = GPIO_PIN_OF_IRQ(irq); - giu_clear(GIUINTENL, 1 << pin); - giu_write(GIUINTSTATL, 1 << pin); -} - -static void unmask_giuint_low(unsigned int irq) -{ - giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); -} - -static struct irq_chip giuint_low_irq_chip = { - .name = "GIUINTL", - .ack = ack_giuint_low, - .mask = mask_giuint_low, - .mask_ack = mask_ack_giuint_low, - .unmask = unmask_giuint_low, -}; - -static void ack_giuint_high(unsigned int irq) -{ - giu_write(GIUINTSTATH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); -} - -static void mask_giuint_high(unsigned int irq) -{ - giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); -} - -static void mask_ack_giuint_high(unsigned int irq) -{ - unsigned int pin; - - pin = GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET; - giu_clear(GIUINTENH, 1 << pin); - giu_write(GIUINTSTATH, 1 << pin); -} - -static void unmask_giuint_high(unsigned int irq) -{ - giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); -} - -static struct irq_chip giuint_high_irq_chip = { - .name = "GIUINTH", - .ack = ack_giuint_high, - .mask = mask_giuint_high, - .mask_ack = mask_ack_giuint_high, - .unmask = unmask_giuint_high, -}; - -static int giu_get_irq(unsigned int irq) -{ - uint16_t pendl, pendh, maskl, maskh; - int i; - - pendl = giu_read(GIUINTSTATL); - pendh = giu_read(GIUINTSTATH); - maskl = giu_read(GIUINTENL); - maskh = giu_read(GIUINTENH); - - maskl &= pendl; - maskh &= pendh; - - if (maskl) { - for (i = 0; i < 16; i++) { - if (maskl & (1 << i)) - return GIU_IRQ(i); - } - } else if (maskh) { - for (i = 0; i < 16; i++) { - if (maskh & (1 << i)) - return GIU_IRQ(i + GIUINT_HIGH_OFFSET); - } - } - - printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n", - maskl, pendl, maskh, pendh); - - atomic_inc(&irq_err_count); - - return -EINVAL; -} - -void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal) -{ - uint16_t mask; - - if (pin < GIUINT_HIGH_OFFSET) { - mask = 1 << pin; - if (trigger != IRQ_TRIGGER_LEVEL) { - giu_set(GIUINTTYPL, mask); - if (signal == IRQ_SIGNAL_HOLD) - giu_set(GIUINTHTSELL, mask); - else - giu_clear(GIUINTHTSELL, mask); - if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) { - switch (trigger) { - case IRQ_TRIGGER_EDGE_FALLING: - giu_set(GIUFEDGEINHL, mask); - giu_clear(GIUREDGEINHL, mask); - break; - case IRQ_TRIGGER_EDGE_RISING: - giu_clear(GIUFEDGEINHL, mask); - giu_set(GIUREDGEINHL, mask); - break; - default: - giu_set(GIUFEDGEINHL, mask); - giu_set(GIUREDGEINHL, mask); - break; - } - } - set_irq_chip_and_handler(GIU_IRQ(pin), - &giuint_low_irq_chip, - handle_edge_irq); - } else { - giu_clear(GIUINTTYPL, mask); - giu_clear(GIUINTHTSELL, mask); - set_irq_chip_and_handler(GIU_IRQ(pin), - &giuint_low_irq_chip, - handle_level_irq); - } - giu_write(GIUINTSTATL, mask); - } else if (pin < GIUINT_HIGH_MAX) { - mask = 1 << (pin - GIUINT_HIGH_OFFSET); - if (trigger != IRQ_TRIGGER_LEVEL) { - giu_set(GIUINTTYPH, mask); - if (signal == IRQ_SIGNAL_HOLD) - giu_set(GIUINTHTSELH, mask); - else - giu_clear(GIUINTHTSELH, mask); - if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) { - switch (trigger) { - case IRQ_TRIGGER_EDGE_FALLING: - giu_set(GIUFEDGEINHH, mask); - giu_clear(GIUREDGEINHH, mask); - break; - case IRQ_TRIGGER_EDGE_RISING: - giu_clear(GIUFEDGEINHH, mask); - giu_set(GIUREDGEINHH, mask); - break; - default: - giu_set(GIUFEDGEINHH, mask); - giu_set(GIUREDGEINHH, mask); - break; - } - } - set_irq_chip_and_handler(GIU_IRQ(pin), - &giuint_high_irq_chip, - handle_edge_irq); - } else { - giu_clear(GIUINTTYPH, mask); - giu_clear(GIUINTHTSELH, mask); - set_irq_chip_and_handler(GIU_IRQ(pin), - &giuint_high_irq_chip, - handle_level_irq); - } - giu_write(GIUINTSTATH, mask); - } -} -EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger); - -void vr41xx_set_irq_level(unsigned int pin, irq_level_t level) -{ - uint16_t mask; - - if (pin < GIUINT_HIGH_OFFSET) { - mask = 1 << pin; - if (level == IRQ_LEVEL_HIGH) - giu_set(GIUINTALSELL, mask); - else - giu_clear(GIUINTALSELL, mask); - giu_write(GIUINTSTATL, mask); - } else if (pin < GIUINT_HIGH_MAX) { - mask = 1 << (pin - GIUINT_HIGH_OFFSET); - if (level == IRQ_LEVEL_HIGH) - giu_set(GIUINTALSELH, mask); - else - giu_clear(GIUINTALSELH, mask); - giu_write(GIUINTSTATH, mask); - } -} -EXPORT_SYMBOL_GPL(vr41xx_set_irq_level); - -gpio_data_t vr41xx_gpio_get_pin(unsigned int pin) -{ - uint16_t reg, mask; - - if (pin >= giu_nr_pins) - return GPIO_DATA_INVAL; - - if (pin < 16) { - reg = giu_read(GIUPIODL); - mask = (uint16_t)1 << pin; - } else if (pin < 32) { - reg = giu_read(GIUPIODH); - mask = (uint16_t)1 << (pin - 16); - } else if (pin < 48) { - reg = giu_read(GIUPODATL); - mask = (uint16_t)1 << (pin - 32); - } else { - reg = giu_read(GIUPODATH); - mask = (uint16_t)1 << (pin - 48); - } - - if (reg & mask) - return GPIO_DATA_HIGH; - - return GPIO_DATA_LOW; -} -EXPORT_SYMBOL_GPL(vr41xx_gpio_get_pin); - -int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data) -{ - uint16_t offset, mask, reg; - unsigned long flags; - - if (pin >= giu_nr_pins) - return -EINVAL; - - if (pin < 16) { - offset = GIUPIODL; - mask = (uint16_t)1 << pin; - } else if (pin < 32) { - offset = GIUPIODH; - mask = (uint16_t)1 << (pin - 16); - } else if (pin < 48) { - offset = GIUPODATL; - mask = (uint16_t)1 << (pin - 32); - } else { - offset = GIUPODATH; - mask = (uint16_t)1 << (pin - 48); - } - - spin_lock_irqsave(&giu_lock, flags); - - reg = giu_read(offset); - if (data == GPIO_DATA_HIGH) - reg |= mask; - else - reg &= ~mask; - giu_write(offset, reg); - - spin_unlock_irqrestore(&giu_lock, flags); - - return 0; -} -EXPORT_SYMBOL_GPL(vr41xx_gpio_set_pin); - -int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir) -{ - uint16_t offset, mask, reg; - unsigned long flags; - - if (pin >= giu_nr_pins) - return -EINVAL; - - if (pin < 16) { - offset = GIUIOSELL; - mask = (uint16_t)1 << pin; - } else if (pin < 32) { - offset = GIUIOSELH; - mask = (uint16_t)1 << (pin - 16); - } else { - if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) { - offset = GIUPODATEN; - mask = (uint16_t)1 << (pin - 32); - } else { - switch (pin) { - case 48: - offset = GIUPODATH; - mask = PIOEN0; - break; - case 49: - offset = GIUPODATH; - mask = PIOEN1; - break; - default: - return -EINVAL; - } - } - } - - spin_lock_irqsave(&giu_lock, flags); - - reg = giu_read(offset); - if (dir == GPIO_OUTPUT) - reg |= mask; - else - reg &= ~mask; - giu_write(offset, reg); - - spin_unlock_irqrestore(&giu_lock, flags); - - return 0; -} -EXPORT_SYMBOL_GPL(vr41xx_gpio_set_direction); - -int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull) -{ - uint16_t reg, mask; - unsigned long flags; - - if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO) - return -EPERM; - - if (pin >= 15) - return -EINVAL; - - mask = (uint16_t)1 << pin; - - spin_lock_irqsave(&giu_lock, flags); - - if (pull == GPIO_PULL_UP || pull == GPIO_PULL_DOWN) { - reg = giu_read(GIUTERMUPDN); - if (pull == GPIO_PULL_UP) - reg |= mask; - else - reg &= ~mask; - giu_write(GIUTERMUPDN, reg); - - reg = giu_read(GIUUSEUPDN); - reg |= mask; - giu_write(GIUUSEUPDN, reg); - } else { - reg = giu_read(GIUUSEUPDN); - reg &= ~mask; - giu_write(GIUUSEUPDN, reg); - } - - spin_unlock_irqrestore(&giu_lock, flags); - - return 0; -} -EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown); - -static ssize_t gpio_read(struct file *file, char __user *buf, size_t len, - loff_t *ppos) -{ - unsigned int pin; - char value = '0'; - - pin = iminor(file->f_path.dentry->d_inode); - if (pin >= giu_nr_pins) - return -EBADF; - - if (vr41xx_gpio_get_pin(pin) == GPIO_DATA_HIGH) - value = '1'; - - if (len <= 0) - return -EFAULT; - - if (put_user(value, buf)) - return -EFAULT; - - return 1; -} - -static ssize_t gpio_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) -{ - unsigned int pin; - size_t i; - char c; - int retval = 0; - - pin = iminor(file->f_path.dentry->d_inode); - if (pin >= giu_nr_pins) - return -EBADF; - - for (i = 0; i < len; i++) { - if (get_user(c, data + i)) - return -EFAULT; - - switch (c) { - case '0': - retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_LOW); - break; - case '1': - retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_HIGH); - break; - case 'D': - printk(KERN_INFO "GPIO%d: pull down\n", pin); - retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DOWN); - break; - case 'd': - printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin); - retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE); - break; - case 'I': - printk(KERN_INFO "GPIO%d: input\n", pin); - retval = vr41xx_gpio_set_direction(pin, GPIO_INPUT); - break; - case 'O': - printk(KERN_INFO "GPIO%d: output\n", pin); - retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT); - break; - case 'o': - printk(KERN_INFO "GPIO%d: output disable\n", pin); - retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT_DISABLE); - break; - case 'P': - printk(KERN_INFO "GPIO%d: pull up\n", pin); - retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_UP); - break; - case 'p': - printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin); - retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE); - break; - default: - break; - } - - if (retval < 0) - break; - } - - return i; -} - -static int gpio_open(struct inode *inode, struct file *file) -{ - unsigned int pin; - - cycle_kernel_lock(); - pin = iminor(inode); - if (pin >= giu_nr_pins) - return -EBADF; - - return nonseekable_open(inode, file); -} - -static int gpio_release(struct inode *inode, struct file *file) -{ - unsigned int pin; - - pin = iminor(inode); - if (pin >= giu_nr_pins) - return -EBADF; - - return 0; -} - -static const struct file_operations gpio_fops = { - .owner = THIS_MODULE, - .read = gpio_read, - .write = gpio_write, - .open = gpio_open, - .release = gpio_release, -}; - -static int __devinit giu_probe(struct platform_device *dev) -{ - struct resource *res; - unsigned int trigger, i, pin; - struct irq_chip *chip; - int irq, retval; - - switch (dev->id) { - case GPIO_50PINS_PULLUPDOWN: - giu_flags = GPIO_HAS_PULLUPDOWN_IO; - giu_nr_pins = 50; - break; - case GPIO_36PINS: - giu_nr_pins = 36; - break; - case GPIO_48PINS_EDGE_SELECT: - giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT; - giu_nr_pins = 48; - break; - default: - printk(KERN_ERR "GIU: unknown ID %d\n", dev->id); - return -ENODEV; - } - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) - return -EBUSY; - - giu_base = ioremap(res->start, res->end - res->start + 1); - if (!giu_base) - return -ENOMEM; - - retval = register_chrdev(major, "GIU", &gpio_fops); - if (retval < 0) { - iounmap(giu_base); - giu_base = NULL; - return retval; - } - - if (major == 0) { - major = retval; - printk(KERN_INFO "GIU: major number %d\n", major); - } - - spin_lock_init(&giu_lock); - - giu_write(GIUINTENL, 0); - giu_write(GIUINTENH, 0); - - trigger = giu_read(GIUINTTYPH) << 16; - trigger |= giu_read(GIUINTTYPL); - for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) { - pin = GPIO_PIN_OF_IRQ(i); - if (pin < GIUINT_HIGH_OFFSET) - chip = &giuint_low_irq_chip; - else - chip = &giuint_high_irq_chip; - - if (trigger & (1 << pin)) - set_irq_chip_and_handler(i, chip, handle_edge_irq); - else - set_irq_chip_and_handler(i, chip, handle_level_irq); - - } - - irq = platform_get_irq(dev, 0); - if (irq < 0 || irq >= nr_irqs) - return -EBUSY; - - return cascade_irq(irq, giu_get_irq); -} - -static int __devexit giu_remove(struct platform_device *dev) -{ - if (giu_base) { - iounmap(giu_base); - giu_base = NULL; - } - - return 0; -} - -static struct platform_driver giu_device_driver = { - .probe = giu_probe, - .remove = __devexit_p(giu_remove), - .driver = { - .name = "GIU", - .owner = THIS_MODULE, - }, -}; - -static int __init vr41xx_giu_init(void) -{ - return platform_driver_register(&giu_device_driver); -} - -static void __exit vr41xx_giu_exit(void) -{ - platform_driver_unregister(&giu_device_driver); -} - -module_init(vr41xx_giu_init); -module_exit(vr41xx_giu_exit); diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 9ffb05f..93c2322 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -161,7 +161,7 @@ static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta, if (periodic) sh_tmu_write(p, TCOR, delta); else - sh_tmu_write(p, TCOR, 0); + sh_tmu_write(p, TCOR, 0xffffffff); sh_tmu_write(p, TCNT, delta); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 6e2ec0b..b90eda8 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -761,6 +761,10 @@ static struct kobj_type ktype_cpufreq = { * cpufreq_add_dev - add a CPU device * * Adds the cpufreq interface for a CPU device. + * + * The Oracle says: try running cpufreq registration/unregistration concurrently + * with with cpu hotplugging and all hell will break loose. Tried to clean this + * mess up, but more thorough testing is needed. - Mathieu */ static int cpufreq_add_dev(struct sys_device *sys_dev) { @@ -772,9 +776,6 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) struct sys_device *cpu_sys_dev; unsigned long flags; unsigned int j; -#ifdef CONFIG_SMP - struct cpufreq_policy *managed_policy; -#endif if (cpu_is_offline(cpu)) return 0; @@ -804,15 +805,12 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) goto nomem_out; } if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) { - kfree(policy); ret = -ENOMEM; - goto nomem_out; + goto err_free_policy; } if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) { - free_cpumask_var(policy->cpus); - kfree(policy); ret = -ENOMEM; - goto nomem_out; + goto err_free_cpumask; } policy->cpu = cpu; @@ -820,7 +818,8 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) /* Initially set CPU itself as the policy_cpu */ per_cpu(policy_cpu, cpu) = cpu; - lock_policy_rwsem_write(cpu); + ret = (lock_policy_rwsem_write(cpu) < 0); + WARN_ON(ret); init_completion(&policy->kobj_unregister); INIT_WORK(&policy->update, handle_update); @@ -833,7 +832,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = cpufreq_driver->init(policy); if (ret) { dprintk("initialization failed\n"); - goto err_out; + goto err_unlock_policy; } policy->user_policy.min = policy->min; policy->user_policy.max = policy->max; @@ -852,21 +851,29 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) #endif for_each_cpu(j, policy->cpus) { + struct cpufreq_policy *managed_policy; + if (cpu == j) continue; /* Check for existing affected CPUs. * They may not be aware of it due to CPU Hotplug. */ - managed_policy = cpufreq_cpu_get(j); /* FIXME: Where is this released? What about error paths? */ + managed_policy = cpufreq_cpu_get(j); if (unlikely(managed_policy)) { /* Set proper policy_cpu */ unlock_policy_rwsem_write(cpu); per_cpu(policy_cpu, cpu) = managed_policy->cpu; - if (lock_policy_rwsem_write(cpu) < 0) - goto err_out_driver_exit; + if (lock_policy_rwsem_write(cpu) < 0) { + /* Should not go through policy unlock path */ + if (cpufreq_driver->exit) + cpufreq_driver->exit(policy); + ret = -EBUSY; + cpufreq_cpu_put(managed_policy); + goto err_free_cpumask; + } spin_lock_irqsave(&cpufreq_driver_lock, flags); cpumask_copy(managed_policy->cpus, policy->cpus); @@ -877,12 +884,14 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = sysfs_create_link(&sys_dev->kobj, &managed_policy->kobj, "cpufreq"); - if (ret) - goto err_out_driver_exit; - - cpufreq_debug_enable_ratelimit(); - ret = 0; - goto err_out_driver_exit; /* call driver->exit() */ + if (!ret) + cpufreq_cpu_put(managed_policy); + /* + * Success. We only needed to be added to the mask. + * Call driver->exit() because only the cpu parent of + * the kobj needed to call init(). + */ + goto out_driver_exit; /* call driver->exit() */ } } #endif @@ -892,25 +901,25 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj, "cpufreq"); if (ret) - goto err_out_driver_exit; + goto out_driver_exit; /* set up files for this cpu device */ drv_attr = cpufreq_driver->attr; while ((drv_attr) && (*drv_attr)) { ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); if (ret) - goto err_out_driver_exit; + goto err_out_kobj_put; drv_attr++; } if (cpufreq_driver->get) { ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); if (ret) - goto err_out_driver_exit; + goto err_out_kobj_put; } if (cpufreq_driver->target) { ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); if (ret) - goto err_out_driver_exit; + goto err_out_kobj_put; } spin_lock_irqsave(&cpufreq_driver_lock, flags); @@ -922,18 +931,22 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) /* symlink affected CPUs */ for_each_cpu(j, policy->cpus) { + struct cpufreq_policy *managed_policy; + if (j == cpu) continue; if (!cpu_online(j)) continue; dprintk("CPU %u already managed, adding link\n", j); - cpufreq_cpu_get(cpu); + managed_policy = cpufreq_cpu_get(cpu); cpu_sys_dev = get_cpu_sysdev(j); ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj, "cpufreq"); - if (ret) + if (ret) { + cpufreq_cpu_put(managed_policy); goto err_out_unregister; + } } policy->governor = NULL; /* to assure that the starting sequence is @@ -965,17 +978,20 @@ err_out_unregister: per_cpu(cpufreq_cpu_data, j) = NULL; spin_unlock_irqrestore(&cpufreq_driver_lock, flags); +err_out_kobj_put: kobject_put(&policy->kobj); wait_for_completion(&policy->kobj_unregister); -err_out_driver_exit: +out_driver_exit: if (cpufreq_driver->exit) cpufreq_driver->exit(policy); -err_out: +err_unlock_policy: unlock_policy_rwsem_write(cpu); +err_free_cpumask: + free_cpumask_var(policy->cpus); +err_free_policy: kfree(policy); - nomem_out: module_put(cpufreq_driver->owner); module_out: @@ -1070,8 +1086,6 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) spin_unlock_irqrestore(&cpufreq_driver_lock, flags); #endif - unlock_policy_rwsem_write(cpu); - if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); @@ -1088,6 +1102,8 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) if (cpufreq_driver->exit) cpufreq_driver->exit(data); + unlock_policy_rwsem_write(cpu); + free_cpumask_var(data->related_cpus); free_cpumask_var(data->cpus); kfree(data); diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 7fc58af..5749050 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -63,22 +63,20 @@ struct cpu_dbs_info_s { unsigned int down_skip; unsigned int requested_freq; int cpu; - unsigned int enable:1; + /* + * percpu mutex that serializes governor limit change with + * do_dbs_timer invocation. We do not want do_dbs_timer to run + * when user is changing the governor or limits. + */ + struct mutex timer_mutex; }; static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); static unsigned int dbs_enable; /* number of CPUs using this policy */ /* - * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug - * lock and dbs_mutex. cpu_hotplug lock should always be held before - * dbs_mutex. If any function that can potentially take cpu_hotplug lock - * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then - * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock - * is recursive for the same process. -Venki - * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it - * would deadlock with cancel_delayed_work_sync(), which is needed for proper - * raceless workqueue teardown. + * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on + * different CPUs. It protects dbs_enable in governor start/stop. */ static DEFINE_MUTEX(dbs_mutex); @@ -143,9 +141,6 @@ dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val, struct cpufreq_policy *policy; - if (!this_dbs_info->enable) - return 0; - policy = this_dbs_info->cur_policy; /* @@ -488,18 +483,12 @@ static void do_dbs_timer(struct work_struct *work) delay -= jiffies % delay; - if (lock_policy_rwsem_write(cpu) < 0) - return; - - if (!dbs_info->enable) { - unlock_policy_rwsem_write(cpu); - return; - } + mutex_lock(&dbs_info->timer_mutex); dbs_check_cpu(dbs_info); queue_delayed_work_on(cpu, kconservative_wq, &dbs_info->work, delay); - unlock_policy_rwsem_write(cpu); + mutex_unlock(&dbs_info->timer_mutex); } static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) @@ -508,7 +497,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; - dbs_info->enable = 1; INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer); queue_delayed_work_on(dbs_info->cpu, kconservative_wq, &dbs_info->work, delay); @@ -516,7 +504,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { - dbs_info->enable = 0; cancel_delayed_work_sync(&dbs_info->work); } @@ -535,9 +522,6 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, if ((!cpu_online(cpu)) || (!policy->cur)) return -EINVAL; - if (this_dbs_info->enable) /* Already enabled */ - break; - mutex_lock(&dbs_mutex); rc = sysfs_create_group(&policy->kobj, &dbs_attr_group); @@ -561,6 +545,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, this_dbs_info->down_skip = 0; this_dbs_info->requested_freq = policy->cur; + mutex_init(&this_dbs_info->timer_mutex); dbs_enable++; /* * Start the timerschedule work, when this governor @@ -590,17 +575,19 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, &dbs_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); } - dbs_timer_init(this_dbs_info); - mutex_unlock(&dbs_mutex); + dbs_timer_init(this_dbs_info); + break; case CPUFREQ_GOV_STOP: - mutex_lock(&dbs_mutex); dbs_timer_exit(this_dbs_info); + + mutex_lock(&dbs_mutex); sysfs_remove_group(&policy->kobj, &dbs_attr_group); dbs_enable--; + mutex_destroy(&this_dbs_info->timer_mutex); /* * Stop the timerschedule work, when this governor @@ -616,7 +603,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, break; case CPUFREQ_GOV_LIMITS: - mutex_lock(&dbs_mutex); + mutex_lock(&this_dbs_info->timer_mutex); if (policy->max < this_dbs_info->cur_policy->cur) __cpufreq_driver_target( this_dbs_info->cur_policy, @@ -625,7 +612,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, __cpufreq_driver_target( this_dbs_info->cur_policy, policy->min, CPUFREQ_RELATION_L); - mutex_unlock(&dbs_mutex); + mutex_unlock(&this_dbs_info->timer_mutex); break; } diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 1911d17..d6ba142 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -70,23 +70,21 @@ struct cpu_dbs_info_s { unsigned int freq_lo_jiffies; unsigned int freq_hi_jiffies; int cpu; - unsigned int enable:1, - sample_type:1; + unsigned int sample_type:1; + /* + * percpu mutex that serializes governor limit change with + * do_dbs_timer invocation. We do not want do_dbs_timer to run + * when user is changing the governor or limits. + */ + struct mutex timer_mutex; }; static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); static unsigned int dbs_enable; /* number of CPUs using this policy */ /* - * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug - * lock and dbs_mutex. cpu_hotplug lock should always be held before - * dbs_mutex. If any function that can potentially take cpu_hotplug lock - * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then - * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock - * is recursive for the same process. -Venki - * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it - * would deadlock with cancel_delayed_work_sync(), which is needed for proper - * raceless workqueue teardown. + * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on + * different CPUs. It protects dbs_enable in governor start/stop. */ static DEFINE_MUTEX(dbs_mutex); @@ -192,13 +190,18 @@ static unsigned int powersave_bias_target(struct cpufreq_policy *policy, return freq_hi; } +static void ondemand_powersave_bias_init_cpu(int cpu) +{ + struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu); + dbs_info->freq_table = cpufreq_frequency_get_table(cpu); + dbs_info->freq_lo = 0; +} + static void ondemand_powersave_bias_init(void) { int i; for_each_online_cpu(i) { - struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, i); - dbs_info->freq_table = cpufreq_frequency_get_table(i); - dbs_info->freq_lo = 0; + ondemand_powersave_bias_init_cpu(i); } } @@ -240,12 +243,10 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused, unsigned int input; int ret; ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; mutex_lock(&dbs_mutex); - if (ret != 1) { - mutex_unlock(&dbs_mutex); - return -EINVAL; - } dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate); mutex_unlock(&dbs_mutex); @@ -259,13 +260,12 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, int ret; ret = sscanf(buf, "%u", &input); - mutex_lock(&dbs_mutex); if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || input < MIN_FREQUENCY_UP_THRESHOLD) { - mutex_unlock(&dbs_mutex); return -EINVAL; } + mutex_lock(&dbs_mutex); dbs_tuners_ins.up_threshold = input; mutex_unlock(&dbs_mutex); @@ -363,9 +363,6 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) struct cpufreq_policy *policy; unsigned int j; - if (!this_dbs_info->enable) - return; - this_dbs_info->freq_lo = 0; policy = this_dbs_info->cur_policy; @@ -493,14 +490,7 @@ static void do_dbs_timer(struct work_struct *work) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; - - if (lock_policy_rwsem_write(cpu) < 0) - return; - - if (!dbs_info->enable) { - unlock_policy_rwsem_write(cpu); - return; - } + mutex_lock(&dbs_info->timer_mutex); /* Common NORMAL_SAMPLE setup */ dbs_info->sample_type = DBS_NORMAL_SAMPLE; @@ -517,7 +507,7 @@ static void do_dbs_timer(struct work_struct *work) dbs_info->freq_lo, CPUFREQ_RELATION_H); } queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay); - unlock_policy_rwsem_write(cpu); + mutex_unlock(&dbs_info->timer_mutex); } static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) @@ -526,8 +516,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; - dbs_info->enable = 1; - ondemand_powersave_bias_init(); dbs_info->sample_type = DBS_NORMAL_SAMPLE; INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer); queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work, @@ -536,7 +524,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { - dbs_info->enable = 0; cancel_delayed_work_sync(&dbs_info->work); } @@ -555,19 +542,15 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, if ((!cpu_online(cpu)) || (!policy->cur)) return -EINVAL; - if (this_dbs_info->enable) /* Already enabled */ - break; - mutex_lock(&dbs_mutex); - dbs_enable++; rc = sysfs_create_group(&policy->kobj, &dbs_attr_group); if (rc) { - dbs_enable--; mutex_unlock(&dbs_mutex); return rc; } + dbs_enable++; for_each_cpu(j, policy->cpus) { struct cpu_dbs_info_s *j_dbs_info; j_dbs_info = &per_cpu(cpu_dbs_info, j); @@ -581,6 +564,8 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, } } this_dbs_info->cpu = cpu; + ondemand_powersave_bias_init_cpu(cpu); + mutex_init(&this_dbs_info->timer_mutex); /* * Start the timerschedule work, when this governor * is used for first time @@ -598,29 +583,31 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, max(min_sampling_rate, latency * LATENCY_MULTIPLIER); } - dbs_timer_init(this_dbs_info); - mutex_unlock(&dbs_mutex); + + dbs_timer_init(this_dbs_info); break; case CPUFREQ_GOV_STOP: - mutex_lock(&dbs_mutex); dbs_timer_exit(this_dbs_info); + + mutex_lock(&dbs_mutex); sysfs_remove_group(&policy->kobj, &dbs_attr_group); + mutex_destroy(&this_dbs_info->timer_mutex); dbs_enable--; mutex_unlock(&dbs_mutex); break; case CPUFREQ_GOV_LIMITS: - mutex_lock(&dbs_mutex); + mutex_lock(&this_dbs_info->timer_mutex); if (policy->max < this_dbs_info->cur_policy->cur) __cpufreq_driver_target(this_dbs_info->cur_policy, policy->max, CPUFREQ_RELATION_H); else if (policy->min > this_dbs_info->cur_policy->cur) __cpufreq_driver_target(this_dbs_info->cur_policy, policy->min, CPUFREQ_RELATION_L); - mutex_unlock(&dbs_mutex); + mutex_unlock(&this_dbs_info->timer_mutex); break; } return 0; diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index c36bf40..858fe60 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -754,13 +754,13 @@ static void amd64_cpu_display_info(struct amd64_pvt *pvt) static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt) { int bit; - enum dev_type edac_cap = EDAC_NONE; + enum dev_type edac_cap = EDAC_FLAG_NONE; bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F) ? 19 : 17; - if (pvt->dclr0 >> BIT(bit)) + if (pvt->dclr0 & BIT(bit)) edac_cap = EDAC_FLAG_SECDED; return edac_cap; @@ -1269,7 +1269,7 @@ static int f10_early_channel_count(struct amd64_pvt *pvt) if (channels == 0) channels = 1; - debugf0("DIMM count= %d\n", channels); + debugf0("MCT channel count: %d\n", channels); return channels; @@ -2966,7 +2966,12 @@ static int amd64_check_ecc_enabled(struct amd64_pvt *pvt) " Use of the override can cause " "unknown side effects.\n"); ret = -ENODEV; - } + } else + /* + * enable further driver loading if ECC enable is + * overridden. + */ + ret = 0; } else { amd64_printk(KERN_INFO, "ECC is enabled by BIOS, Proceeding " @@ -3006,7 +3011,6 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci) mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2; mci->edac_ctl_cap = EDAC_FLAG_NONE; - mci->edac_cap = EDAC_FLAG_NONE; if (pvt->nbcap & K8_NBCAP_SECDED) mci->edac_ctl_cap |= EDAC_FLAG_SECDED; @@ -3052,7 +3056,7 @@ static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl, if (!pvt) goto err_exit; - pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl); + pvt->mc_node_id = get_node_id(dram_f2_ctl); pvt->dram_f2_ctl = dram_f2_ctl; pvt->ext_model = boot_cpu_data.x86_model >> 4; @@ -3179,8 +3183,7 @@ static int __devinit amd64_init_one_instance(struct pci_dev *pdev, { int ret = 0; - debugf0("(MC node=%d,mc_type='%s')\n", - get_mc_node_id_from_pdev(pdev), + debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev), get_amd_family_name(mc_type->driver_data)); ret = pci_enable_device(pdev); @@ -3319,15 +3322,17 @@ static int __init amd64_edac_init(void) err = amd64_init_2nd_stage(pvt_lookup[nb]); if (err) - goto err_exit; + goto err_2nd_stage; } amd64_setup_pci_device(); return 0; +err_2nd_stage: + debugf0("2nd stage failed\n"); + err_exit: - debugf0("'finish_setup' stage failed\n"); pci_unregister_driver(&amd64_pci_driver); return err; diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index a159957..ba73015 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -444,7 +444,7 @@ enum { #define K8_MSR_MC4ADDR 0x0412 /* AMD sets the first MC device at device ID 0x18. */ -static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev) +static inline int get_node_id(struct pci_dev *pdev) { return PCI_SLOT(pdev->devfn) - 0x18; } diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 3493c6b..871c13b 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -150,6 +150,8 @@ enum mem_type { MEM_FB_DDR2, /* fully buffered DDR2 */ MEM_RDDR2, /* Registered DDR2 RAM */ MEM_XDR, /* Rambus XDR */ + MEM_DDR3, /* DDR3 RAM */ + MEM_RDDR3, /* Registered DDR3 RAM */ }; #define MEM_FLAG_EMPTY BIT(MEM_EMPTY) @@ -167,6 +169,8 @@ enum mem_type { #define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2) #define MEM_FLAG_RDDR2 BIT(MEM_RDDR2) #define MEM_FLAG_XDR BIT(MEM_XDR) +#define MEM_FLAG_DDR3 BIT(MEM_DDR3) +#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3) /* chipset Error Detection and Correction capabilities and mode */ enum edac_type { diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index ad218fe..e1d4ce0 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -94,7 +94,9 @@ static const char *mem_types[] = { [MEM_DDR2] = "Unbuffered-DDR2", [MEM_FB_DDR2] = "FullyBuffered-DDR2", [MEM_RDDR2] = "Registered-DDR2", - [MEM_XDR] = "XDR" + [MEM_XDR] = "XDR", + [MEM_DDR3] = "Unbuffered-DDR3", + [MEM_RDDR3] = "Registered-DDR3" }; static const char *dev_types[] = { diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 7c8c2d7..3f2ccfc 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -757,6 +757,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci) case DSC_SDTYPE_DDR2: mtype = MEM_RDDR2; break; + case DSC_SDTYPE_DDR3: + mtype = MEM_RDDR3; + break; default: mtype = MEM_UNKNOWN; break; @@ -769,6 +772,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci) case DSC_SDTYPE_DDR2: mtype = MEM_DDR2; break; + case DSC_SDTYPE_DDR3: + mtype = MEM_DDR3; + break; default: mtype = MEM_UNKNOWN; break; diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h index 135b353..52432ee 100644 --- a/drivers/edac/mpc85xx_edac.h +++ b/drivers/edac/mpc85xx_edac.h @@ -53,6 +53,7 @@ #define DSC_SDTYPE_DDR 0x02000000 #define DSC_SDTYPE_DDR2 0x03000000 +#define DSC_SDTYPE_DDR3 0x07000000 #define DSC_X32_EN 0x00000020 /* Err_Int_En */ diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c index 543fcca..f74edae 100644 --- a/drivers/firewire/core-card.c +++ b/drivers/firewire/core-card.c @@ -196,8 +196,8 @@ static void allocate_broadcast_channel(struct fw_card *card, int generation) { int channel, bandwidth = 0; - fw_iso_resource_manage(card, generation, 1ULL << 31, - &channel, &bandwidth, true); + fw_iso_resource_manage(card, generation, 1ULL << 31, &channel, + &bandwidth, true, card->bm_transaction_data); if (channel == 31) { card->broadcast_channel_allocated = true; device_for_each_child(card->device, (void *)(long)generation, @@ -230,7 +230,6 @@ static void fw_card_bm_work(struct work_struct *work) bool do_reset = false; bool root_device_is_running; bool root_device_is_cmc; - __be32 lock_data[2]; spin_lock_irqsave(&card->lock, flags); @@ -273,22 +272,23 @@ static void fw_card_bm_work(struct work_struct *work) goto pick_me; } - lock_data[0] = cpu_to_be32(0x3f); - lock_data[1] = cpu_to_be32(local_id); + card->bm_transaction_data[0] = cpu_to_be32(0x3f); + card->bm_transaction_data[1] = cpu_to_be32(local_id); spin_unlock_irqrestore(&card->lock, flags); rcode = fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP, irm_id, generation, SCODE_100, CSR_REGISTER_BASE + CSR_BUS_MANAGER_ID, - lock_data, sizeof(lock_data)); + card->bm_transaction_data, + sizeof(card->bm_transaction_data)); if (rcode == RCODE_GENERATION) /* Another bus reset, BM work has been rescheduled. */ goto out; if (rcode == RCODE_COMPLETE && - lock_data[0] != cpu_to_be32(0x3f)) { + card->bm_transaction_data[0] != cpu_to_be32(0x3f)) { /* Somebody else is BM. Only act as IRM. */ if (local_id == irm_id) diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index d1d30c6..ced186d 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -125,6 +125,7 @@ struct iso_resource { int generation; u64 channels; s32 bandwidth; + __be32 transaction_data[2]; struct iso_resource_event *e_alloc, *e_dealloc; }; @@ -1049,7 +1050,8 @@ static void iso_resource_work(struct work_struct *work) r->channels, &channel, &bandwidth, todo == ISO_RES_ALLOC || todo == ISO_RES_REALLOC || - todo == ISO_RES_ALLOC_ONCE); + todo == ISO_RES_ALLOC_ONCE, + r->transaction_data); /* * Is this generation outdated already? As long as this resource sticks * in the idr, it will be scheduled again for a newer generation or at diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c index 166f19c..110e731 100644 --- a/drivers/firewire/core-iso.c +++ b/drivers/firewire/core-iso.c @@ -177,9 +177,8 @@ EXPORT_SYMBOL(fw_iso_context_stop); */ static int manage_bandwidth(struct fw_card *card, int irm_id, int generation, - int bandwidth, bool allocate) + int bandwidth, bool allocate, __be32 data[2]) { - __be32 data[2]; int try, new, old = allocate ? BANDWIDTH_AVAILABLE_INITIAL : 0; /* @@ -215,9 +214,9 @@ static int manage_bandwidth(struct fw_card *card, int irm_id, int generation, } static int manage_channel(struct fw_card *card, int irm_id, int generation, - u32 channels_mask, u64 offset, bool allocate) + u32 channels_mask, u64 offset, bool allocate, __be32 data[2]) { - __be32 data[2], c, all, old; + __be32 c, all, old; int i, retry = 5; old = all = allocate ? cpu_to_be32(~0) : 0; @@ -260,7 +259,7 @@ static int manage_channel(struct fw_card *card, int irm_id, int generation, } static void deallocate_channel(struct fw_card *card, int irm_id, - int generation, int channel) + int generation, int channel, __be32 buffer[2]) { u32 mask; u64 offset; @@ -269,7 +268,7 @@ static void deallocate_channel(struct fw_card *card, int irm_id, offset = channel < 32 ? CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI : CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO; - manage_channel(card, irm_id, generation, mask, offset, false); + manage_channel(card, irm_id, generation, mask, offset, false, buffer); } /** @@ -298,7 +297,7 @@ static void deallocate_channel(struct fw_card *card, int irm_id, */ void fw_iso_resource_manage(struct fw_card *card, int generation, u64 channels_mask, int *channel, int *bandwidth, - bool allocate) + bool allocate, __be32 buffer[2]) { u32 channels_hi = channels_mask; /* channels 31...0 */ u32 channels_lo = channels_mask >> 32; /* channels 63...32 */ @@ -310,10 +309,12 @@ void fw_iso_resource_manage(struct fw_card *card, int generation, if (channels_hi) c = manage_channel(card, irm_id, generation, channels_hi, - CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI, allocate); + CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI, + allocate, buffer); if (channels_lo && c < 0) { c = manage_channel(card, irm_id, generation, channels_lo, - CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO, allocate); + CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO, + allocate, buffer); if (c >= 0) c += 32; } @@ -325,12 +326,13 @@ void fw_iso_resource_manage(struct fw_card *card, int generation, if (*bandwidth == 0) return; - ret = manage_bandwidth(card, irm_id, generation, *bandwidth, allocate); + ret = manage_bandwidth(card, irm_id, generation, *bandwidth, + allocate, buffer); if (ret < 0) *bandwidth = 0; if (allocate && ret < 0 && c >= 0) { - deallocate_channel(card, irm_id, generation, c); + deallocate_channel(card, irm_id, generation, c, buffer); *channel = ret; } } diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h index c3cfc64..6052816 100644 --- a/drivers/firewire/core.h +++ b/drivers/firewire/core.h @@ -120,7 +120,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event); int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma); void fw_iso_resource_manage(struct fw_card *card, int generation, - u64 channels_mask, int *channel, int *bandwidth, bool allocate); + u64 channels_mask, int *channel, int *bandwidth, + bool allocate, __be32 buffer[2]); /* -topology */ diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 24c4563..8d51568 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -201,6 +201,12 @@ static struct fw_device *target_device(struct sbp2_target *tgt) #define SBP2_CYCLE_LIMIT (0xc8 << 12) /* 200 125us cycles */ /* + * There is no transport protocol limit to the CDB length, but we implement + * a fixed length only. 16 bytes is enough for disks larger than 2 TB. + */ +#define SBP2_MAX_CDB_SIZE 16 + +/* * The default maximum s/g segment size of a FireWire controller is * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to * be quadlet-aligned, we set the length limit to 0xffff & ~3. @@ -312,7 +318,7 @@ struct sbp2_command_orb { struct sbp2_pointer next; struct sbp2_pointer data_descriptor; __be32 misc; - u8 command_block[12]; + u8 command_block[SBP2_MAX_CDB_SIZE]; } request; struct scsi_cmnd *cmd; scsi_done_fn_t done; @@ -1146,6 +1152,8 @@ static int sbp2_probe(struct device *dev) if (fw_device_enable_phys_dma(device) < 0) goto fail_shost_put; + shost->max_cmd_len = SBP2_MAX_CDB_SIZE; + if (scsi_add_host(shost, &unit->device) < 0) goto fail_shost_put; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 3582c39..96dda81 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -79,6 +79,12 @@ config GPIO_XILINX help Say yes here to support the Xilinx FPGA GPIO device +config GPIO_VR41XX + tristate "NEC VR4100 series General-purpose I/O Uint support" + depends on CPU_VR41XX + help + Say yes here to support the NEC VR4100 series General-purpose I/O Uint + comment "I2C GPIO expanders:" config GPIO_MAX732X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index ef90203..9244c6f 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_GPIO_PL061) += pl061.o obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o +obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c index aa8e7cb..4ee4c83 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/pl061.c @@ -109,6 +109,16 @@ static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value) writeb(!!value << offset, chip->base + (1 << (offset + 2))); } +static int pl061_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc); + + if (chip->irq_base == (unsigned) -1) + return -EINVAL; + + return chip->irq_base + offset; +} + /* * PL061 GPIO IRQ */ @@ -200,7 +210,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) desc->chip->ack(irq); list_for_each(ptr, chip_list) { unsigned long pending; - int gpio; + int offset; chip = list_entry(ptr, struct pl061_gpio, list); pending = readb(chip->base + GPIOMIS); @@ -209,8 +219,8 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) if (pending == 0) continue; - for_each_bit(gpio, &pending, PL061_GPIO_NR) - generic_handle_irq(gpio_to_irq(gpio)); + for_each_bit(offset, &pending, PL061_GPIO_NR) + generic_handle_irq(pl061_to_irq(&chip->gc, offset)); } desc->chip->unmask(irq); } @@ -221,7 +231,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) struct pl061_gpio *chip; struct list_head *chip_list; int ret, irq, i; - static unsigned long init_irq[BITS_TO_LONGS(NR_IRQS)]; + static DECLARE_BITMAP(init_irq, NR_IRQS); pdata = dev->dev.platform_data; if (pdata == NULL) @@ -251,6 +261,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) chip->gc.direction_output = pl061_direction_output; chip->gc.get = pl061_get_value; chip->gc.set = pl061_set_value; + chip->gc.to_irq = pl061_to_irq; chip->gc.base = pdata->gpio_base; chip->gc.ngpio = PL061_GPIO_NR; chip->gc.label = dev_name(&dev->dev); @@ -280,6 +291,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id) if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */ chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL); if (chip_list == NULL) { + clear_bit(irq, init_irq); ret = -ENOMEM; goto iounmap; } diff --git a/drivers/gpio/vr41xx_giu.c b/drivers/gpio/vr41xx_giu.c new file mode 100644 index 0000000..b70e0613 --- /dev/null +++ b/drivers/gpio/vr41xx_giu.c @@ -0,0 +1,586 @@ +/* + * Driver for NEC VR4100 series General-purpose I/O Unit. + * + * Copyright (C) 2002 MontaVista Software Inc. + * Author: Yoichi Yuasa <source@mvista.com> + * Copyright (C) 2003-2009 Yoichi Yuasa <yuasa@linux-mips.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/smp_lock.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#include <asm/vr41xx/giu.h> +#include <asm/vr41xx/irq.h> +#include <asm/vr41xx/vr41xx.h> + +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); +MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver"); +MODULE_LICENSE("GPL"); + +#define GIUIOSELL 0x00 +#define GIUIOSELH 0x02 +#define GIUPIODL 0x04 +#define GIUPIODH 0x06 +#define GIUINTSTATL 0x08 +#define GIUINTSTATH 0x0a +#define GIUINTENL 0x0c +#define GIUINTENH 0x0e +#define GIUINTTYPL 0x10 +#define GIUINTTYPH 0x12 +#define GIUINTALSELL 0x14 +#define GIUINTALSELH 0x16 +#define GIUINTHTSELL 0x18 +#define GIUINTHTSELH 0x1a +#define GIUPODATL 0x1c +#define GIUPODATEN 0x1c +#define GIUPODATH 0x1e + #define PIOEN0 0x0100 + #define PIOEN1 0x0200 +#define GIUPODAT 0x1e +#define GIUFEDGEINHL 0x20 +#define GIUFEDGEINHH 0x22 +#define GIUREDGEINHL 0x24 +#define GIUREDGEINHH 0x26 + +#define GIUUSEUPDN 0x1e0 +#define GIUTERMUPDN 0x1e2 + +#define GPIO_HAS_PULLUPDOWN_IO 0x0001 +#define GPIO_HAS_OUTPUT_ENABLE 0x0002 +#define GPIO_HAS_INTERRUPT_EDGE_SELECT 0x0100 + +enum { + GPIO_INPUT, + GPIO_OUTPUT, +}; + +static DEFINE_SPINLOCK(giu_lock); +static unsigned long giu_flags; + +static void __iomem *giu_base; + +#define giu_read(offset) readw(giu_base + (offset)) +#define giu_write(offset, value) writew((value), giu_base + (offset)) + +#define GPIO_PIN_OF_IRQ(irq) ((irq) - GIU_IRQ_BASE) +#define GIUINT_HIGH_OFFSET 16 +#define GIUINT_HIGH_MAX 32 + +static inline u16 giu_set(u16 offset, u16 set) +{ + u16 data; + + data = giu_read(offset); + data |= set; + giu_write(offset, data); + + return data; +} + +static inline u16 giu_clear(u16 offset, u16 clear) +{ + u16 data; + + data = giu_read(offset); + data &= ~clear; + giu_write(offset, data); + + return data; +} + +static void ack_giuint_low(unsigned int irq) +{ + giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(irq)); +} + +static void mask_giuint_low(unsigned int irq) +{ + giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); +} + +static void mask_ack_giuint_low(unsigned int irq) +{ + unsigned int pin; + + pin = GPIO_PIN_OF_IRQ(irq); + giu_clear(GIUINTENL, 1 << pin); + giu_write(GIUINTSTATL, 1 << pin); +} + +static void unmask_giuint_low(unsigned int irq) +{ + giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); +} + +static struct irq_chip giuint_low_irq_chip = { + .name = "GIUINTL", + .ack = ack_giuint_low, + .mask = mask_giuint_low, + .mask_ack = mask_ack_giuint_low, + .unmask = unmask_giuint_low, +}; + +static void ack_giuint_high(unsigned int irq) +{ + giu_write(GIUINTSTATH, + 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); +} + +static void mask_giuint_high(unsigned int irq) +{ + giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); +} + +static void mask_ack_giuint_high(unsigned int irq) +{ + unsigned int pin; + + pin = GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET; + giu_clear(GIUINTENH, 1 << pin); + giu_write(GIUINTSTATH, 1 << pin); +} + +static void unmask_giuint_high(unsigned int irq) +{ + giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); +} + +static struct irq_chip giuint_high_irq_chip = { + .name = "GIUINTH", + .ack = ack_giuint_high, + .mask = mask_giuint_high, + .mask_ack = mask_ack_giuint_high, + .unmask = unmask_giuint_high, +}; + +static int giu_get_irq(unsigned int irq) +{ + u16 pendl, pendh, maskl, maskh; + int i; + + pendl = giu_read(GIUINTSTATL); + pendh = giu_read(GIUINTSTATH); + maskl = giu_read(GIUINTENL); + maskh = giu_read(GIUINTENH); + + maskl &= pendl; + maskh &= pendh; + + if (maskl) { + for (i = 0; i < 16; i++) { + if (maskl & (1 << i)) + return GIU_IRQ(i); + } + } else if (maskh) { + for (i = 0; i < 16; i++) { + if (maskh & (1 << i)) + return GIU_IRQ(i + GIUINT_HIGH_OFFSET); + } + } + + printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n", + maskl, pendl, maskh, pendh); + + atomic_inc(&irq_err_count); + + return -EINVAL; +} + +void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, + irq_signal_t signal) +{ + u16 mask; + + if (pin < GIUINT_HIGH_OFFSET) { + mask = 1 << pin; + if (trigger != IRQ_TRIGGER_LEVEL) { + giu_set(GIUINTTYPL, mask); + if (signal == IRQ_SIGNAL_HOLD) + giu_set(GIUINTHTSELL, mask); + else + giu_clear(GIUINTHTSELL, mask); + if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) { + switch (trigger) { + case IRQ_TRIGGER_EDGE_FALLING: + giu_set(GIUFEDGEINHL, mask); + giu_clear(GIUREDGEINHL, mask); + break; + case IRQ_TRIGGER_EDGE_RISING: + giu_clear(GIUFEDGEINHL, mask); + giu_set(GIUREDGEINHL, mask); + break; + default: + giu_set(GIUFEDGEINHL, mask); + giu_set(GIUREDGEINHL, mask); + break; + } + } + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_low_irq_chip, + handle_edge_irq); + } else { + giu_clear(GIUINTTYPL, mask); + giu_clear(GIUINTHTSELL, mask); + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_low_irq_chip, + handle_level_irq); + } + giu_write(GIUINTSTATL, mask); + } else if (pin < GIUINT_HIGH_MAX) { + mask = 1 << (pin - GIUINT_HIGH_OFFSET); + if (trigger != IRQ_TRIGGER_LEVEL) { + giu_set(GIUINTTYPH, mask); + if (signal == IRQ_SIGNAL_HOLD) + giu_set(GIUINTHTSELH, mask); + else + giu_clear(GIUINTHTSELH, mask); + if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) { + switch (trigger) { + case IRQ_TRIGGER_EDGE_FALLING: + giu_set(GIUFEDGEINHH, mask); + giu_clear(GIUREDGEINHH, mask); + break; + case IRQ_TRIGGER_EDGE_RISING: + giu_clear(GIUFEDGEINHH, mask); + giu_set(GIUREDGEINHH, mask); + break; + default: + giu_set(GIUFEDGEINHH, mask); + giu_set(GIUREDGEINHH, mask); + break; + } + } + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_high_irq_chip, + handle_edge_irq); + } else { + giu_clear(GIUINTTYPH, mask); + giu_clear(GIUINTHTSELH, mask); + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_high_irq_chip, + handle_level_irq); + } + giu_write(GIUINTSTATH, mask); + } +} +EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger); + +void vr41xx_set_irq_level(unsigned int pin, irq_level_t level) +{ + u16 mask; + + if (pin < GIUINT_HIGH_OFFSET) { + mask = 1 << pin; + if (level == IRQ_LEVEL_HIGH) + giu_set(GIUINTALSELL, mask); + else + giu_clear(GIUINTALSELL, mask); + giu_write(GIUINTSTATL, mask); + } else if (pin < GIUINT_HIGH_MAX) { + mask = 1 << (pin - GIUINT_HIGH_OFFSET); + if (level == IRQ_LEVEL_HIGH) + giu_set(GIUINTALSELH, mask); + else + giu_clear(GIUINTALSELH, mask); + giu_write(GIUINTSTATH, mask); + } +} +EXPORT_SYMBOL_GPL(vr41xx_set_irq_level); + +static int giu_set_direction(struct gpio_chip *chip, unsigned pin, int dir) +{ + u16 offset, mask, reg; + unsigned long flags; + + if (pin >= chip->ngpio) + return -EINVAL; + + if (pin < 16) { + offset = GIUIOSELL; + mask = 1 << pin; + } else if (pin < 32) { + offset = GIUIOSELH; + mask = 1 << (pin - 16); + } else { + if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) { + offset = GIUPODATEN; + mask = 1 << (pin - 32); + } else { + switch (pin) { + case 48: + offset = GIUPODATH; + mask = PIOEN0; + break; + case 49: + offset = GIUPODATH; + mask = PIOEN1; + break; + default: + return -EINVAL; + } + } + } + + spin_lock_irqsave(&giu_lock, flags); + + reg = giu_read(offset); + if (dir == GPIO_OUTPUT) + reg |= mask; + else + reg &= ~mask; + giu_write(offset, reg); + + spin_unlock_irqrestore(&giu_lock, flags); + + return 0; +} + +int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull) +{ + u16 reg, mask; + unsigned long flags; + + if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO) + return -EPERM; + + if (pin >= 15) + return -EINVAL; + + mask = 1 << pin; + + spin_lock_irqsave(&giu_lock, flags); + + if (pull == GPIO_PULL_UP || pull == GPIO_PULL_DOWN) { + reg = giu_read(GIUTERMUPDN); + if (pull == GPIO_PULL_UP) + reg |= mask; + else + reg &= ~mask; + giu_write(GIUTERMUPDN, reg); + + reg = giu_read(GIUUSEUPDN); + reg |= mask; + giu_write(GIUUSEUPDN, reg); + } else { + reg = giu_read(GIUUSEUPDN); + reg &= ~mask; + giu_write(GIUUSEUPDN, reg); + } + + spin_unlock_irqrestore(&giu_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown); + +static int vr41xx_gpio_get(struct gpio_chip *chip, unsigned pin) +{ + u16 reg, mask; + + if (pin >= chip->ngpio) + return -EINVAL; + + if (pin < 16) { + reg = giu_read(GIUPIODL); + mask = 1 << pin; + } else if (pin < 32) { + reg = giu_read(GIUPIODH); + mask = 1 << (pin - 16); + } else if (pin < 48) { + reg = giu_read(GIUPODATL); + mask = 1 << (pin - 32); + } else { + reg = giu_read(GIUPODATH); + mask = 1 << (pin - 48); + } + + if (reg & mask) + return 1; + + return 0; +} + +static void vr41xx_gpio_set(struct gpio_chip *chip, unsigned pin, + int value) +{ + u16 offset, mask, reg; + unsigned long flags; + + if (pin >= chip->ngpio) + return; + + if (pin < 16) { + offset = GIUPIODL; + mask = 1 << pin; + } else if (pin < 32) { + offset = GIUPIODH; + mask = 1 << (pin - 16); + } else if (pin < 48) { + offset = GIUPODATL; + mask = 1 << (pin - 32); + } else { + offset = GIUPODATH; + mask = 1 << (pin - 48); + } + + spin_lock_irqsave(&giu_lock, flags); + + reg = giu_read(offset); + if (value) + reg |= mask; + else + reg &= ~mask; + giu_write(offset, reg); + + spin_unlock_irqrestore(&giu_lock, flags); +} + + +static int vr41xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return giu_set_direction(chip, offset, GPIO_INPUT); +} + +static int vr41xx_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + vr41xx_gpio_set(chip, offset, value); + + return giu_set_direction(chip, offset, GPIO_OUTPUT); +} + +static int vr41xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + if (offset >= chip->ngpio) + return -EINVAL; + + return GIU_IRQ_BASE + offset; +} + +static struct gpio_chip vr41xx_gpio_chip = { + .label = "vr41xx", + .owner = THIS_MODULE, + .direction_input = vr41xx_gpio_direction_input, + .get = vr41xx_gpio_get, + .direction_output = vr41xx_gpio_direction_output, + .set = vr41xx_gpio_set, + .to_irq = vr41xx_gpio_to_irq, +}; + +static int __devinit giu_probe(struct platform_device *pdev) +{ + struct resource *res; + unsigned int trigger, i, pin; + struct irq_chip *chip; + int irq, retval; + + switch (pdev->id) { + case GPIO_50PINS_PULLUPDOWN: + giu_flags = GPIO_HAS_PULLUPDOWN_IO; + vr41xx_gpio_chip.ngpio = 50; + break; + case GPIO_36PINS: + vr41xx_gpio_chip.ngpio = 36; + break; + case GPIO_48PINS_EDGE_SELECT: + giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT; + vr41xx_gpio_chip.ngpio = 48; + break; + default: + dev_err(&pdev->dev, "GIU: unknown ID %d\n", pdev->id); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EBUSY; + + giu_base = ioremap(res->start, res->end - res->start + 1); + if (!giu_base) + return -ENOMEM; + + vr41xx_gpio_chip.dev = &pdev->dev; + + retval = gpiochip_add(&vr41xx_gpio_chip); + + giu_write(GIUINTENL, 0); + giu_write(GIUINTENH, 0); + + trigger = giu_read(GIUINTTYPH) << 16; + trigger |= giu_read(GIUINTTYPL); + for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) { + pin = GPIO_PIN_OF_IRQ(i); + if (pin < GIUINT_HIGH_OFFSET) + chip = &giuint_low_irq_chip; + else + chip = &giuint_high_irq_chip; + + if (trigger & (1 << pin)) + set_irq_chip_and_handler(i, chip, handle_edge_irq); + else + set_irq_chip_and_handler(i, chip, handle_level_irq); + + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0 || irq >= nr_irqs) + return -EBUSY; + + return cascade_irq(irq, giu_get_irq); +} + +static int __devexit giu_remove(struct platform_device *pdev) +{ + if (giu_base) { + iounmap(giu_base); + giu_base = NULL; + } + + return 0; +} + +static struct platform_driver giu_device_driver = { + .probe = giu_probe, + .remove = __devexit_p(giu_remove), + .driver = { + .name = "GIU", + .owner = THIS_MODULE, + }, +}; + +static int __init vr41xx_giu_init(void) +{ + return platform_driver_register(&giu_device_driver); +} + +static void __exit vr41xx_giu_exit(void) +{ + platform_driver_unregister(&giu_device_driver); +} + +module_init(vr41xx_giu_init); +module_exit(vr41xx_giu_exit); diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index c961fe4..39b393d 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -81,6 +81,7 @@ config DRM_I830 config DRM_I915 tristate "i915 driver" + depends on AGP_INTEL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4e89ab0..fe23f29 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -16,6 +16,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \ drm-$(CONFIG_COMPAT) += drm_ioc32.o obj-$(CONFIG_DRM) += drm.o +obj-$(CONFIG_DRM_TTM) += ttm/ obj-$(CONFIG_DRM_TDFX) += tdfx/ obj-$(CONFIG_DRM_R128) += r128/ obj-$(CONFIG_DRM_RADEON)+= radeon/ @@ -26,4 +27,3 @@ obj-$(CONFIG_DRM_I915) += i915/ obj-$(CONFIG_DRM_SIS) += sis/ obj-$(CONFIG_DRM_SAVAGE)+= savage/ obj-$(CONFIG_DRM_VIA) +=via/ -obj-$(CONFIG_DRM_TTM) += ttm/ diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index a6f73f1..3da9cfa 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -1090,6 +1090,8 @@ int drm_helper_resume_force_mode(struct drm_device *dev) if (ret == false) DRM_ERROR("failed to set mode on crtc %p\n", crtc); } + /* disable the unused connectors while restoring the modesetting */ + drm_helper_disable_unused_functions(dev); return 0; } EXPORT_SYMBOL(drm_helper_resume_force_mode); diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 7d08352..80cc6d0 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -294,10 +294,10 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo; unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo; unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo; - unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 8 | pt->hsync_offset_lo; - unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 6 | pt->hsync_pulse_width_lo; - unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) | (pt->vsync_offset_pulse_width_lo & 0xf); - unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) >> 2 | pt->vsync_offset_pulse_width_lo >> 4; + unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo; + unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo; + unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4; + unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf); /* ignore tiny modes */ if (hactive < 64 || vactive < 64) @@ -347,8 +347,8 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ? DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC; - mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf) << 8; - mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4; + mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4; + mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8; if (quirks & EDID_QUIRK_DETAILED_IN_CM) { mode->width_mm *= 10; diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 51c5a05..30d6b99 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -13,6 +13,8 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \ intel_crt.o \ intel_lvds.o \ intel_bios.o \ + intel_dp.o \ + intel_dp_i2c.o \ intel_hdmi.o \ intel_sdvo.o \ intel_modes.o \ diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h index e747ac4..288fc50 100644 --- a/drivers/gpu/drm/i915/dvo.h +++ b/drivers/gpu/drm/i915/dvo.h @@ -37,7 +37,7 @@ struct intel_dvo_device { /* GPIO register used for i2c bus to control this device */ u32 gpio; int slave_addr; - struct intel_i2c_chan *i2c_bus; + struct i2c_adapter *i2c_bus; const struct intel_dvo_dev_ops *dev_ops; void *dev_priv; @@ -52,7 +52,7 @@ struct intel_dvo_dev_ops { * Returns NULL if the device does not exist. */ bool (*init)(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus); + struct i2c_adapter *i2cbus); /* * Called to allow the output a chance to create properties after the diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c index 03d4b49..621815b 100644 --- a/drivers/gpu/drm/i915/dvo_ch7017.c +++ b/drivers/gpu/drm/i915/dvo_ch7017.c @@ -176,19 +176,20 @@ static void ch7017_dpms(struct intel_dvo_device *dvo, int mode); static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val) { - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -208,10 +209,11 @@ static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val) static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val) { - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -228,8 +230,9 @@ static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val) /** Probes for a CH7017 on the given bus and slave address. */ static bool ch7017_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); struct ch7017_priv *priv; uint8_t val; @@ -237,8 +240,7 @@ static bool ch7017_init(struct intel_dvo_device *dvo, if (priv == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = priv; if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val)) @@ -248,7 +250,7 @@ static bool ch7017_init(struct intel_dvo_device *dvo, val != CH7018_DEVICE_ID_VALUE && val != CH7019_DEVICE_ID_VALUE) { DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n", - val, i2cbus->adapter.name,i2cbus->slave_addr); + val, i2cbus->adapter.name,dvo->slave_addr); goto fail; } diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c index d2fd95d..a9b8962 100644 --- a/drivers/gpu/drm/i915/dvo_ch7xxx.c +++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c @@ -123,19 +123,20 @@ static char *ch7xxx_get_id(uint8_t vid) static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) { struct ch7xxx_priv *ch7xxx= dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -152,7 +153,7 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (!ch7xxx->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -161,10 +162,11 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) { struct ch7xxx_priv *ch7xxx = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -178,14 +180,14 @@ static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) if (!ch7xxx->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } static bool ch7xxx_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { /* this will detect the CH7xxx chip on the specified i2c bus */ struct ch7xxx_priv *ch7xxx; @@ -196,8 +198,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, if (ch7xxx == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = ch7xxx; ch7xxx->quiet = true; @@ -207,7 +208,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, name = ch7xxx_get_id(vendor); if (!name) { DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n", - vendor, i2cbus->adapter.name, i2cbus->slave_addr); + vendor, adapter->name, dvo->slave_addr); goto out; } @@ -217,7 +218,7 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, if (device != CH7xxx_DID) { DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n", - vendor, i2cbus->adapter.name, i2cbus->slave_addr); + vendor, adapter->name, dvo->slave_addr); goto out; } diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c index 0c8d375..aa176f9 100644 --- a/drivers/gpu/drm/i915/dvo_ivch.c +++ b/drivers/gpu/drm/i915/dvo_ivch.c @@ -169,13 +169,14 @@ static void ivch_dump_regs(struct intel_dvo_device *dvo); static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) { struct ivch_priv *priv = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[1]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 0, }, @@ -186,7 +187,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD | I2C_M_NOSTART, .len = 2, .buf = in_buf, @@ -202,7 +203,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) if (!priv->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -211,10 +212,11 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) { struct ivch_priv *priv = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[3]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 3, .buf = out_buf, @@ -229,7 +231,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) if (!priv->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; @@ -237,7 +239,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) /** Probes the given bus and slave address for an ivch */ static bool ivch_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { struct ivch_priv *priv; uint16_t temp; @@ -246,8 +248,7 @@ static bool ivch_init(struct intel_dvo_device *dvo, if (priv == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = priv; priv->quiet = true; diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c index 033a4bb..e1c1f73 100644 --- a/drivers/gpu/drm/i915/dvo_sil164.c +++ b/drivers/gpu/drm/i915/dvo_sil164.c @@ -76,19 +76,20 @@ struct sil164_priv { static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) { struct sil164_priv *sil = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -105,7 +106,7 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (!sil->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -113,10 +114,11 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) { struct sil164_priv *sil= dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -130,7 +132,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) if (!sil->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; @@ -138,7 +140,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) /* Silicon Image 164 driver for chip on i2c bus */ static bool sil164_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { /* this will detect the SIL164 chip on the specified i2c bus */ struct sil164_priv *sil; @@ -148,8 +150,7 @@ static bool sil164_init(struct intel_dvo_device *dvo, if (sil == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = sil; sil->quiet = true; @@ -158,7 +159,7 @@ static bool sil164_init(struct intel_dvo_device *dvo, if (ch != (SIL164_VID & 0xff)) { DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n", - ch, i2cbus->adapter.name, i2cbus->slave_addr); + ch, adapter->name, dvo->slave_addr); goto out; } @@ -167,7 +168,7 @@ static bool sil164_init(struct intel_dvo_device *dvo, if (ch != (SIL164_DID & 0xff)) { DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n", - ch, i2cbus->adapter.name, i2cbus->slave_addr); + ch, adapter->name, dvo->slave_addr); goto out; } sil->quiet = false; diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c index 207fda8..9ecc907 100644 --- a/drivers/gpu/drm/i915/dvo_tfp410.c +++ b/drivers/gpu/drm/i915/dvo_tfp410.c @@ -101,19 +101,20 @@ struct tfp410_priv { static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) { struct tfp410_priv *tfp = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); u8 out_buf[2]; u8 in_buf[2]; struct i2c_msg msgs[] = { { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -130,7 +131,7 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) if (!tfp->quiet) { DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; } @@ -138,10 +139,11 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) { struct tfp410_priv *tfp = dvo->dev_priv; - struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + struct i2c_adapter *adapter = dvo->i2c_bus; + struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter); uint8_t out_buf[2]; struct i2c_msg msg = { - .addr = i2cbus->slave_addr, + .addr = dvo->slave_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -155,7 +157,7 @@ static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) if (!tfp->quiet) { DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", - addr, i2cbus->adapter.name, i2cbus->slave_addr); + addr, i2cbus->adapter.name, dvo->slave_addr); } return false; @@ -174,7 +176,7 @@ static int tfp410_getid(struct intel_dvo_device *dvo, int addr) /* Ti TFP410 driver for chip on i2c bus */ static bool tfp410_init(struct intel_dvo_device *dvo, - struct intel_i2c_chan *i2cbus) + struct i2c_adapter *adapter) { /* this will detect the tfp410 chip on the specified i2c bus */ struct tfp410_priv *tfp; @@ -184,20 +186,19 @@ static bool tfp410_init(struct intel_dvo_device *dvo, if (tfp == NULL) return false; - dvo->i2c_bus = i2cbus; - dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->i2c_bus = adapter; dvo->dev_priv = tfp; tfp->quiet = true; if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) { DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n", - id, i2cbus->adapter.name, i2cbus->slave_addr); + id, adapter->name, dvo->slave_addr); goto out; } if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) { DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n", - id, i2cbus->adapter.name, i2cbus->slave_addr); + id, adapter->name, dvo->slave_addr); goto out; } tfp->quiet = false; diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index f112c76..8c47831 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -846,7 +846,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data, return 0; } - printk(KERN_DEBUG "set status page addr 0x%08x\n", (u32)hws->addr); + DRM_DEBUG("set status page addr 0x%08x\n", (u32)hws->addr); dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12); @@ -885,8 +885,8 @@ static int i915_set_status_page(struct drm_device *dev, void *data, * some RAM for the framebuffer at early boot. This code figures out * how much was set aside so we can use it for our own purposes. */ -static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size, - unsigned long *preallocated_size) +static int i915_probe_agp(struct drm_device *dev, uint32_t *aperture_size, + uint32_t *preallocated_size) { struct pci_dev *bridge_dev; u16 tmp = 0; @@ -984,10 +984,11 @@ static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size, return 0; } -static int i915_load_modeset_init(struct drm_device *dev) +static int i915_load_modeset_init(struct drm_device *dev, + unsigned long prealloc_size, + unsigned long agp_size) { struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long agp_size, prealloc_size; int fb_bar = IS_I9XX(dev) ? 2 : 0; int ret = 0; @@ -1002,10 +1003,6 @@ static int i915_load_modeset_init(struct drm_device *dev) if (IS_I965G(dev) || IS_G33(dev)) dev_priv->cursor_needs_physical = false; - ret = i915_probe_agp(dev, &agp_size, &prealloc_size); - if (ret) - goto out; - /* Basic memrange allocator for stolen space (aka vram) */ drm_mm_init(&dev_priv->vram, 0, prealloc_size); @@ -1082,6 +1079,44 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master) master->driver_priv = NULL; } +static void i915_get_mem_freq(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + u32 tmp; + + if (!IS_IGD(dev)) + return; + + tmp = I915_READ(CLKCFG); + + switch (tmp & CLKCFG_FSB_MASK) { + case CLKCFG_FSB_533: + dev_priv->fsb_freq = 533; /* 133*4 */ + break; + case CLKCFG_FSB_800: + dev_priv->fsb_freq = 800; /* 200*4 */ + break; + case CLKCFG_FSB_667: + dev_priv->fsb_freq = 667; /* 167*4 */ + break; + case CLKCFG_FSB_400: + dev_priv->fsb_freq = 400; /* 100*4 */ + break; + } + + switch (tmp & CLKCFG_MEM_MASK) { + case CLKCFG_MEM_533: + dev_priv->mem_freq = 533; + break; + case CLKCFG_MEM_667: + dev_priv->mem_freq = 667; + break; + case CLKCFG_MEM_800: + dev_priv->mem_freq = 800; + break; + } +} + /** * i915_driver_load - setup chip and create an initial config * @dev: DRM device @@ -1098,6 +1133,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) struct drm_i915_private *dev_priv = dev->dev_private; resource_size_t base, size; int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1; + uint32_t agp_size, prealloc_size; /* i915 has 4 more counters */ dev->counters += 4; @@ -1146,9 +1182,22 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) "performance may suffer.\n"); } + ret = i915_probe_agp(dev, &agp_size, &prealloc_size); + if (ret) + goto out_iomapfree; + /* enable GEM by default */ dev_priv->has_gem = 1; + if (prealloc_size > agp_size * 3 / 4) { + DRM_ERROR("Detected broken video BIOS with %d/%dkB of video " + "memory stolen.\n", + prealloc_size / 1024, agp_size / 1024); + DRM_ERROR("Disabling GEM. (try reducing stolen memory or " + "updating the BIOS to fix).\n"); + dev_priv->has_gem = 0; + } + dev->driver->get_vblank_counter = i915_get_vblank_counter; dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ if (IS_G4X(dev) || IS_IGDNG(dev)) { @@ -1165,6 +1214,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto out_iomapfree; } + i915_get_mem_freq(dev); + /* On the 945G/GM, the chipset reports the MSI capability on the * integrated graphics even though the support isn't actually there * according to the published specs. It doesn't appear to function @@ -1180,6 +1231,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) pci_enable_msi(dev->pdev); spin_lock_init(&dev_priv->user_irq_lock); + spin_lock_init(&dev_priv->error_lock); dev_priv->user_irq_refcount = 0; ret = drm_vblank_init(dev, I915_NUM_PIPE); @@ -1190,7 +1242,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) } if (drm_core_check_feature(dev, DRIVER_MODESET)) { - ret = i915_load_modeset_init(dev); + ret = i915_load_modeset_init(dev, prealloc_size, agp_size); if (ret < 0) { DRM_ERROR("failed to init modeset\n"); goto out_rmmap; diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 98560e1..fc4b68a 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -35,6 +35,7 @@ #include "drm_pciids.h" #include <linux/console.h> +#include "drm_crtc_helper.h" static unsigned int i915_modeset = -1; module_param_named(modeset, i915_modeset, int, 0400); @@ -57,8 +58,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) struct drm_i915_private *dev_priv = dev->dev_private; if (!dev || !dev_priv) { - printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv); - printk(KERN_ERR "DRM not initialized, aborting suspend.\n"); + DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv); + DRM_ERROR("DRM not initialized, aborting suspend.\n"); return -ENODEV; } @@ -67,8 +68,6 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) pci_save_state(dev->pdev); - i915_save_state(dev); - /* If KMS is active, we do the leavevt stuff here */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { if (i915_gem_idle(dev)) @@ -77,6 +76,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) drm_irq_uninstall(dev); } + i915_save_state(dev); + intel_opregion_free(dev, 1); if (state.event == PM_EVENT_SUSPEND) { @@ -115,6 +116,10 @@ static int i915_resume(struct drm_device *dev) drm_irq_install(dev); } + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + /* Resume the modeset for every activated CRTC */ + drm_helper_resume_force_mode(dev); + } return ret; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 7a84f04..d087528 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -133,6 +133,22 @@ struct sdvo_device_mapping { u8 initialized; }; +struct drm_i915_error_state { + u32 eir; + u32 pgtbl_er; + u32 pipeastat; + u32 pipebstat; + u32 ipeir; + u32 ipehr; + u32 instdone; + u32 acthd; + u32 instpm; + u32 instps; + u32 instdone1; + u32 seqno; + struct timeval time; +}; + typedef struct drm_i915_private { struct drm_device *dev; @@ -209,6 +225,11 @@ typedef struct drm_i915_private { int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ int num_fence_regs; /* 8 on pre-965, 16 otherwise */ + unsigned int fsb_freq, mem_freq; + + spinlock_t error_lock; + struct drm_i915_error_state *first_error; + /* Register state */ u8 saveLBB; u32 saveDSPACNTR; @@ -306,6 +327,17 @@ typedef struct drm_i915_private { u32 saveCURBPOS; u32 saveCURBBASE; u32 saveCURSIZE; + u32 saveDP_B; + u32 saveDP_C; + u32 saveDP_D; + u32 savePIPEA_GMCH_DATA_M; + u32 savePIPEB_GMCH_DATA_M; + u32 savePIPEA_GMCH_DATA_N; + u32 savePIPEB_GMCH_DATA_N; + u32 savePIPEA_DP_LINK_M; + u32 savePIPEB_DP_LINK_M; + u32 savePIPEA_DP_LINK_N; + u32 savePIPEB_DP_LINK_N; struct { struct drm_mm gtt_space; @@ -457,9 +489,6 @@ struct drm_i915_gem_object { */ int fence_reg; - /** Boolean whether this object has a valid gtt offset. */ - int gtt_bound; - /** How many users have pinned this object in GTT space */ int pin_count; @@ -644,6 +673,7 @@ void i915_gem_free_object(struct drm_gem_object *obj); int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment); void i915_gem_object_unpin(struct drm_gem_object *obj); int i915_gem_object_unbind(struct drm_gem_object *obj); +void i915_gem_release_mmap(struct drm_gem_object *obj); void i915_gem_lastclose(struct drm_device *dev); uint32_t i915_get_gem_seqno(struct drm_device *dev); int i915_gem_object_get_fence_reg(struct drm_gem_object *obj); @@ -857,7 +887,10 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \ IS_I915GM(dev))) #define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev)) +#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev)) +/* dsparb controlled by hw only */ +#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index fd2b8bd..5bf4203 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1006,7 +1006,7 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); #if WATCH_BUF - DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", + DRM_INFO("set_domain_ioctl %p(%zd), %08x %08x\n", obj, obj->size, read_domains, write_domain); #endif if (read_domains & I915_GEM_DOMAIN_GTT) { @@ -1050,7 +1050,7 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, } #if WATCH_BUF - DRM_INFO("%s: sw_finish %d (%p %d)\n", + DRM_INFO("%s: sw_finish %d (%p %zd)\n", __func__, args->handle, obj, obj->size); #endif obj_priv = obj->driver_private; @@ -1252,6 +1252,31 @@ out_free_list: return ret; } +/** + * i915_gem_release_mmap - remove physical page mappings + * @obj: obj in question + * + * Preserve the reservation of the mmaping with the DRM core code, but + * relinquish ownership of the pages back to the system. + * + * It is vital that we remove the page mapping if we have mapped a tiled + * object through the GTT and then lose the fence register due to + * resource pressure. Similarly if the object has been moved out of the + * aperture, than pages mapped into userspace must be revoked. Removing the + * mapping will then trigger a page fault on the next user access, allowing + * fixup by i915_gem_fault(). + */ +void +i915_gem_release_mmap(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + if (dev->dev_mapping) + unmap_mapping_range(dev->dev_mapping, + obj_priv->mmap_offset, obj->size, 1); +} + static void i915_gem_free_mmap_offset(struct drm_gem_object *obj) { @@ -1861,7 +1886,6 @@ i915_gem_object_unbind(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; - loff_t offset; int ret = 0; #if WATCH_BUF @@ -1898,9 +1922,7 @@ i915_gem_object_unbind(struct drm_gem_object *obj) BUG_ON(obj_priv->active); /* blow away mappings if mapped through GTT */ - offset = ((loff_t) obj->map_list.hash.key) << PAGE_SHIFT; - if (dev->dev_mapping) - unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1); + i915_gem_release_mmap(obj); if (obj_priv->fence_reg != I915_FENCE_REG_NONE) i915_gem_clear_fence_reg(obj); @@ -2222,7 +2244,6 @@ try_again: /* None available, try to steal one or wait for a user to finish */ if (i == dev_priv->num_fence_regs) { uint32_t seqno = dev_priv->mm.next_gem_seqno; - loff_t offset; if (avail == 0) return -ENOSPC; @@ -2274,10 +2295,7 @@ try_again: * Zap this virtual mapping so we can set up a fence again * for this object next time we need it. */ - offset = ((loff_t) reg->obj->map_list.hash.key) << PAGE_SHIFT; - if (dev->dev_mapping) - unmap_mapping_range(dev->dev_mapping, offset, - reg->obj->size, 1); + i915_gem_release_mmap(reg->obj); old_obj_priv->fence_reg = I915_FENCE_REG_NONE; } @@ -2423,7 +2441,7 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) } #if WATCH_BUF - DRM_INFO("Binding object of size %d at 0x%08x\n", + DRM_INFO("Binding object of size %zd at 0x%08x\n", obj->size, obj_priv->gtt_offset); #endif ret = i915_gem_object_get_pages(obj); @@ -4227,6 +4245,7 @@ i915_gem_lastclose(struct drm_device *dev) void i915_gem_load(struct drm_device *dev) { + int i; drm_i915_private_t *dev_priv = dev->dev_private; spin_lock_init(&dev_priv->mm.active_list_lock); @@ -4246,6 +4265,18 @@ i915_gem_load(struct drm_device *dev) else dev_priv->num_fence_regs = 8; + /* Initialize fence registers to zero */ + if (IS_I965G(dev)) { + for (i = 0; i < 16; i++) + I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0); + } else { + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_830_0 + (i * 4), 0); + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_945_8 + (i * 4), 0); + } + i915_gem_detect_bit_6_swizzle(dev); } diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c index 8d0b943..e602614 100644 --- a/drivers/gpu/drm/i915/i915_gem_debug.c +++ b/drivers/gpu/drm/i915/i915_gem_debug.c @@ -87,7 +87,7 @@ i915_gem_dump_object(struct drm_gem_object *obj, int len, chunk_len = page_len - chunk; if (chunk_len > 128) chunk_len = 128; - i915_gem_dump_page(obj_priv->page_list[page], + i915_gem_dump_page(obj_priv->pages[page], chunk, chunk + chunk_len, obj_priv->gtt_offset + page * PAGE_SIZE, @@ -143,7 +143,7 @@ i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle) uint32_t *backing_map = NULL; int bad_count = 0; - DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %dkb):\n", + DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %zdkb):\n", __func__, obj, obj_priv->gtt_offset, handle, obj->size / 1024); @@ -157,7 +157,7 @@ i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle) for (page = 0; page < obj->size / PAGE_SIZE; page++) { int i; - backing_map = kmap_atomic(obj_priv->page_list[page], KM_USER0); + backing_map = kmap_atomic(obj_priv->pages[page], KM_USER0); if (backing_map == NULL) { DRM_ERROR("failed to map backing page\n"); diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c index 28146e4..9a44bfc 100644 --- a/drivers/gpu/drm/i915/i915_gem_debugfs.c +++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c @@ -75,11 +75,10 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data) case ACTIVE_LIST: seq_printf(m, "Active:\n"); lock = &dev_priv->mm.active_list_lock; - spin_lock(lock); head = &dev_priv->mm.active_list; break; case INACTIVE_LIST: - seq_printf(m, "Inctive:\n"); + seq_printf(m, "Inactive:\n"); head = &dev_priv->mm.inactive_list; break; case FLUSHING_LIST: @@ -91,6 +90,8 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data) return 0; } + if (lock) + spin_lock(lock); list_for_each_entry(obj_priv, head, list) { struct drm_gem_object *obj = obj_priv->obj; @@ -104,7 +105,10 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data) if (obj->name) seq_printf(m, " (name: %d)", obj->name); if (obj_priv->fence_reg != I915_FENCE_REG_NONE) - seq_printf(m, " (fence: %d)\n", obj_priv->fence_reg); + seq_printf(m, " (fence: %d)", obj_priv->fence_reg); + if (obj_priv->gtt_space != NULL) + seq_printf(m, " (gtt_offset: %08x)", obj_priv->gtt_offset); + seq_printf(m, "\n"); } @@ -323,6 +327,39 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) return 0; } +static int i915_error_state(struct seq_file *m, void *unused) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_error_state *error; + unsigned long flags; + + spin_lock_irqsave(&dev_priv->error_lock, flags); + if (!dev_priv->first_error) { + seq_printf(m, "no error state collected\n"); + goto out; + } + + error = dev_priv->first_error; + + seq_printf(m, "EIR: 0x%08x\n", error->eir); + seq_printf(m, " PGTBL_ER: 0x%08x\n", error->pgtbl_er); + seq_printf(m, " INSTPM: 0x%08x\n", error->instpm); + seq_printf(m, " IPEIR: 0x%08x\n", error->ipeir); + seq_printf(m, " IPEHR: 0x%08x\n", error->ipehr); + seq_printf(m, " INSTDONE: 0x%08x\n", error->instdone); + seq_printf(m, " ACTHD: 0x%08x\n", error->acthd); + if (IS_I965G(dev)) { + seq_printf(m, " INSTPS: 0x%08x\n", error->instps); + seq_printf(m, " INSTDONE1: 0x%08x\n", error->instdone1); + } + +out: + spin_unlock_irqrestore(&dev_priv->error_lock, flags); + + return 0; +} static struct drm_info_list i915_gem_debugfs_list[] = { {"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST}, @@ -336,6 +373,7 @@ static struct drm_info_list i915_gem_debugfs_list[] = { {"i915_ringbuffer_data", i915_ringbuffer_data, 0}, {"i915_ringbuffer_info", i915_ringbuffer_info, 0}, {"i915_batchbuffers", i915_batchbuffer_info, 0}, + {"i915_error_state", i915_error_state, 0}, }; #define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list) diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 5c1ceec..a2d527b 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -114,11 +114,13 @@ intel_alloc_mchbar_resource(struct drm_device *dev) mchbar_addr = ((u64)temp_hi << 32) | temp_lo; /* If ACPI doesn't have it, assume we need to allocate it ourselves */ +#ifdef CONFIG_PNP if (mchbar_addr && pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) { ret = 0; goto out_put; } +#endif /* Get some space for it */ ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res, @@ -519,6 +521,12 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, goto err; } + /* If we've changed tiling, GTT-mappings of the object + * need to re-fault to ensure that the correct fence register + * setup is in place. + */ + i915_gem_release_mmap(obj); + obj_priv->tiling_mode = args->tiling_mode; obj_priv->stride = args->stride; } diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index b86b7b7..7ba23a6 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -26,6 +26,7 @@ * */ +#include <linux/sysrq.h> #include "drmP.h" #include "drm.h" #include "i915_drm.h" @@ -41,9 +42,10 @@ * we leave them always unmasked in IMR and then control enabling them through * PIPESTAT alone. */ -#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \ - I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) +#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \ + I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | \ + I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) /** Interrupts that we mask and unmask at runtime. */ #define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT) @@ -232,7 +234,17 @@ static void i915_hotplug_work_func(struct work_struct *work) drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, hotplug_work); struct drm_device *dev = dev_priv->dev; - + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + + if (mode_config->num_connector) { + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->hot_plug) + (*intel_output->hot_plug) (intel_output); + } + } /* Just fire off a uevent and let userspace tell us what to do */ drm_sysfs_hotplug_event(dev); } @@ -278,6 +290,47 @@ irqreturn_t igdng_irq_handler(struct drm_device *dev) return ret; } +static void i915_capture_error_state(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_i915_error_state *error; + unsigned long flags; + + spin_lock_irqsave(&dev_priv->error_lock, flags); + if (dev_priv->first_error) + goto out; + + error = kmalloc(sizeof(*error), GFP_ATOMIC); + if (!error) { + DRM_DEBUG("out ot memory, not capturing error state\n"); + goto out; + } + + error->eir = I915_READ(EIR); + error->pgtbl_er = I915_READ(PGTBL_ER); + error->pipeastat = I915_READ(PIPEASTAT); + error->pipebstat = I915_READ(PIPEBSTAT); + error->instpm = I915_READ(INSTPM); + if (!IS_I965G(dev)) { + error->ipeir = I915_READ(IPEIR); + error->ipehr = I915_READ(IPEHR); + error->instdone = I915_READ(INSTDONE); + error->acthd = I915_READ(ACTHD); + } else { + error->ipeir = I915_READ(IPEIR_I965); + error->ipehr = I915_READ(IPEHR_I965); + error->instdone = I915_READ(INSTDONE_I965); + error->instps = I915_READ(INSTPS); + error->instdone1 = I915_READ(INSTDONE1); + error->acthd = I915_READ(ACTHD_I965); + } + + dev_priv->first_error = error; + +out: + spin_unlock_irqrestore(&dev_priv->error_lock, flags); +} + irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; @@ -323,11 +376,15 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) * Clear the PIPE(A|B)STAT regs before the IIR */ if (pipea_stats & 0x8000ffff) { + if (pipea_stats & PIPE_FIFO_UNDERRUN_STATUS) + DRM_DEBUG("pipe a underrun\n"); I915_WRITE(PIPEASTAT, pipea_stats); irq_received = 1; } if (pipeb_stats & 0x8000ffff) { + if (pipeb_stats & PIPE_FIFO_UNDERRUN_STATUS) + DRM_DEBUG("pipe b underrun\n"); I915_WRITE(PIPEBSTAT, pipeb_stats); irq_received = 1; } @@ -352,6 +409,80 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) I915_READ(PORT_HOTPLUG_STAT); } + if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) { + u32 eir = I915_READ(EIR); + + i915_capture_error_state(dev); + + printk(KERN_ERR "render error detected, EIR: 0x%08x\n", + eir); + if (eir & I915_ERROR_PAGE_TABLE) { + u32 pgtbl_err = I915_READ(PGTBL_ER); + printk(KERN_ERR "page table error\n"); + printk(KERN_ERR " PGTBL_ER: 0x%08x\n", + pgtbl_err); + I915_WRITE(PGTBL_ER, pgtbl_err); + (void)I915_READ(PGTBL_ER); + } + if (eir & I915_ERROR_MEMORY_REFRESH) { + printk(KERN_ERR "memory refresh error\n"); + printk(KERN_ERR "PIPEASTAT: 0x%08x\n", + pipea_stats); + printk(KERN_ERR "PIPEBSTAT: 0x%08x\n", + pipeb_stats); + /* pipestat has already been acked */ + } + if (eir & I915_ERROR_INSTRUCTION) { + printk(KERN_ERR "instruction error\n"); + printk(KERN_ERR " INSTPM: 0x%08x\n", + I915_READ(INSTPM)); + if (!IS_I965G(dev)) { + u32 ipeir = I915_READ(IPEIR); + + printk(KERN_ERR " IPEIR: 0x%08x\n", + I915_READ(IPEIR)); + printk(KERN_ERR " IPEHR: 0x%08x\n", + I915_READ(IPEHR)); + printk(KERN_ERR " INSTDONE: 0x%08x\n", + I915_READ(INSTDONE)); + printk(KERN_ERR " ACTHD: 0x%08x\n", + I915_READ(ACTHD)); + I915_WRITE(IPEIR, ipeir); + (void)I915_READ(IPEIR); + } else { + u32 ipeir = I915_READ(IPEIR_I965); + + printk(KERN_ERR " IPEIR: 0x%08x\n", + I915_READ(IPEIR_I965)); + printk(KERN_ERR " IPEHR: 0x%08x\n", + I915_READ(IPEHR_I965)); + printk(KERN_ERR " INSTDONE: 0x%08x\n", + I915_READ(INSTDONE_I965)); + printk(KERN_ERR " INSTPS: 0x%08x\n", + I915_READ(INSTPS)); + printk(KERN_ERR " INSTDONE1: 0x%08x\n", + I915_READ(INSTDONE1)); + printk(KERN_ERR " ACTHD: 0x%08x\n", + I915_READ(ACTHD_I965)); + I915_WRITE(IPEIR_I965, ipeir); + (void)I915_READ(IPEIR_I965); + } + } + + I915_WRITE(EIR, eir); + (void)I915_READ(EIR); + eir = I915_READ(EIR); + if (eir) { + /* + * some errors might have become stuck, + * mask them. + */ + DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir); + I915_WRITE(EMR, I915_READ(EMR) | eir); + I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); + } + } + I915_WRITE(IIR, iir); new_iir = I915_READ(IIR); /* Flush posted writes */ @@ -722,6 +853,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR; + u32 error_mask; DRM_INIT_WAITQUEUE(&dev_priv->irq_queue); @@ -758,6 +890,21 @@ int i915_driver_irq_postinstall(struct drm_device *dev) i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT); } + /* + * Enable some error detection, note the instruction error mask + * bit is reserved, so we leave it masked. + */ + if (IS_G4X(dev)) { + error_mask = ~(GM45_ERROR_PAGE_TABLE | + GM45_ERROR_MEM_PRIV | + GM45_ERROR_CP_PRIV | + I915_ERROR_MEMORY_REFRESH); + } else { + error_mask = ~(I915_ERROR_PAGE_TABLE | + I915_ERROR_MEMORY_REFRESH); + } + I915_WRITE(EMR, error_mask); + /* Disable pipe interrupt enables, clear pending pipe status */ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f6237a0..6c08584 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -206,6 +206,7 @@ /* * Instruction and interrupt control regs */ +#define PGTBL_ER 0x02024 #define PRB0_TAIL 0x02030 #define PRB0_HEAD 0x02034 #define PRB0_START 0x02038 @@ -226,11 +227,18 @@ #define PRB1_HEAD 0x02044 /* 915+ only */ #define PRB1_START 0x02048 /* 915+ only */ #define PRB1_CTL 0x0204c /* 915+ only */ +#define IPEIR_I965 0x02064 +#define IPEHR_I965 0x02068 +#define INSTDONE_I965 0x0206c +#define INSTPS 0x02070 /* 965+ only */ +#define INSTDONE1 0x0207c /* 965+ only */ #define ACTHD_I965 0x02074 #define HWS_PGA 0x02080 #define HWS_ADDRESS_MASK 0xfffff000 #define HWS_START_ADDRESS_SHIFT 4 #define IPEIR 0x02088 +#define IPEHR 0x0208c +#define INSTDONE 0x02090 #define NOPID 0x02094 #define HWSTAM 0x02098 #define SCPD0 0x0209c /* 915+ only */ @@ -258,10 +266,22 @@ #define EIR 0x020b0 #define EMR 0x020b4 #define ESR 0x020b8 +#define GM45_ERROR_PAGE_TABLE (1<<5) +#define GM45_ERROR_MEM_PRIV (1<<4) +#define I915_ERROR_PAGE_TABLE (1<<4) +#define GM45_ERROR_CP_PRIV (1<<3) +#define I915_ERROR_MEMORY_REFRESH (1<<1) +#define I915_ERROR_INSTRUCTION (1<<0) #define INSTPM 0x020c0 #define ACTHD 0x020c8 #define FW_BLC 0x020d8 +#define FW_BLC2 0x020dc #define FW_BLC_SELF 0x020e0 /* 915+ only */ +#define FW_BLC_SELF_EN (1<<15) +#define MM_BURST_LENGTH 0x00700000 +#define MM_FIFO_WATERMARK 0x0001F000 +#define LM_BURST_LENGTH 0x00000700 +#define LM_FIFO_WATERMARK 0x0000001F #define MI_ARB_STATE 0x020e4 /* 915+ only */ #define CACHE_MODE_0 0x02120 /* 915+ only */ #define CM0_MASK_SHIFT 16 @@ -569,6 +589,23 @@ #define C0DRB3 0x10206 #define C1DRB3 0x10606 +/* Clocking configuration register */ +#define CLKCFG 0x10c00 +#define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */ +#define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */ +#define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ +#define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ +#define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ +#define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ +/* Note, below two are guess */ +#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ +#define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */ +#define CLKCFG_FSB_MASK (7 << 0) +#define CLKCFG_MEM_533 (1 << 4) +#define CLKCFG_MEM_667 (2 << 4) +#define CLKCFG_MEM_800 (3 << 4) +#define CLKCFG_MEM_MASK (7 << 4) + /** GM965 GM45 render standby register */ #define MCHBAR_RENDER_STANDBY 0x111B8 @@ -834,9 +871,25 @@ #define HORIZ_INTERP_MASK (3 << 6) #define HORIZ_AUTO_SCALE (1 << 5) #define PANEL_8TO6_DITHER_ENABLE (1 << 3) +#define PFIT_FILTER_FUZZY (0 << 24) +#define PFIT_SCALING_AUTO (0 << 26) +#define PFIT_SCALING_PROGRAMMED (1 << 26) +#define PFIT_SCALING_PILLAR (2 << 26) +#define PFIT_SCALING_LETTER (3 << 26) #define PFIT_PGM_RATIOS 0x61234 #define PFIT_VERT_SCALE_MASK 0xfff00000 #define PFIT_HORIZ_SCALE_MASK 0x0000fff0 +/* Pre-965 */ +#define PFIT_VERT_SCALE_SHIFT 20 +#define PFIT_VERT_SCALE_MASK 0xfff00000 +#define PFIT_HORIZ_SCALE_SHIFT 4 +#define PFIT_HORIZ_SCALE_MASK 0x0000fff0 +/* 965+ */ +#define PFIT_VERT_SCALE_SHIFT_965 16 +#define PFIT_VERT_SCALE_MASK_965 0x1fff0000 +#define PFIT_HORIZ_SCALE_SHIFT_965 0 +#define PFIT_HORIZ_SCALE_MASK_965 0x00001fff + #define PFIT_AUTO_RATIOS 0x61238 /* Backlight control */ @@ -1552,6 +1605,34 @@ #define DSPARB_CSTART_SHIFT 7 #define DSPARB_BSTART_MASK (0x7f) #define DSPARB_BSTART_SHIFT 0 +#define DSPARB_BEND_SHIFT 9 /* on 855 */ +#define DSPARB_AEND_SHIFT 0 + +#define DSPFW1 0x70034 +#define DSPFW2 0x70038 +#define DSPFW3 0x7003c +#define IGD_SELF_REFRESH_EN (1<<30) + +/* FIFO watermark sizes etc */ +#define I915_FIFO_LINE_SIZE 64 +#define I830_FIFO_LINE_SIZE 32 +#define I945_FIFO_SIZE 127 /* 945 & 965 */ +#define I915_FIFO_SIZE 95 +#define I855GM_FIFO_SIZE 255 +#define I830_FIFO_SIZE 95 +#define I915_MAX_WM 0x3f + +#define IGD_DISPLAY_FIFO 512 /* in 64byte unit */ +#define IGD_FIFO_LINE_SIZE 64 +#define IGD_MAX_WM 0x1ff +#define IGD_DFT_WM 0x3f +#define IGD_DFT_HPLLOFF_WM 0 +#define IGD_GUARD_WM 10 +#define IGD_CURSOR_FIFO 64 +#define IGD_CURSOR_MAX_WM 0x3f +#define IGD_CURSOR_DFT_WM 0 +#define IGD_CURSOR_GUARD_WM 5 + /* * The two pipe frame counter registers are not synchronized, so * reading a stable value is somewhat tricky. The following code diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index a98e283..9e1d16e 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -222,23 +222,12 @@ static void i915_restore_vga(struct drm_device *dev) I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK); } -int i915_save_state(struct drm_device *dev) +static void i915_save_modeset_reg(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - int i; - - pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); - - /* Render Standby */ - if (IS_I965G(dev) && IS_MOBILE(dev)) - dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); - - /* Hardware status page */ - dev_priv->saveHWS = I915_READ(HWS_PGA); - - /* Display arbitration control */ - dev_priv->saveDSPARB = I915_READ(DSPARB); + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return; /* Pipe & plane A info */ dev_priv->savePIPEACONF = I915_READ(PIPEACONF); dev_priv->savePIPEASRC = I915_READ(PIPEASRC); @@ -294,7 +283,122 @@ int i915_save_state(struct drm_device *dev) } i915_save_palette(dev, PIPE_B); dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT); + return; +} +static void i915_restore_modeset_reg(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return; + + /* Pipe & plane A info */ + /* Prime the clock */ + if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { + I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & + ~DPLL_VCO_ENABLE); + DRM_UDELAY(150); + } + I915_WRITE(FPA0, dev_priv->saveFPA0); + I915_WRITE(FPA1, dev_priv->saveFPA1); + /* Actually enable it */ + I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); + DRM_UDELAY(150); + if (IS_I965G(dev)) + I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); + DRM_UDELAY(150); + + /* Restore mode */ + I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A); + I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A); + I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A); + I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); + I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); + I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); + I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + + /* Restore plane info */ + I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); + I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS); + I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC); + I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR); + I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE); + if (IS_I965G(dev)) { + I915_WRITE(DSPASURF, dev_priv->saveDSPASURF); + I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF); + } + + I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF); + + i915_restore_palette(dev, PIPE_A); + /* Enable the plane */ + I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR); + I915_WRITE(DSPAADDR, I915_READ(DSPAADDR)); + + /* Pipe & plane B info */ + if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { + I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & + ~DPLL_VCO_ENABLE); + DRM_UDELAY(150); + } + I915_WRITE(FPB0, dev_priv->saveFPB0); + I915_WRITE(FPB1, dev_priv->saveFPB1); + /* Actually enable it */ + I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); + DRM_UDELAY(150); + if (IS_I965G(dev)) + I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); + DRM_UDELAY(150); + + /* Restore mode */ + I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B); + I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B); + I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B); + I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); + I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); + I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); + I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + + /* Restore plane info */ + I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); + I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS); + I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC); + I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR); + I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE); + if (IS_I965G(dev)) { + I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF); + I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF); + } + + I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF); + + i915_restore_palette(dev, PIPE_B); + /* Enable the plane */ + I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); + I915_WRITE(DSPBADDR, I915_READ(DSPBADDR)); + return; +} +int i915_save_state(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + + pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + + /* Render Standby */ + if (IS_I965G(dev) && IS_MOBILE(dev)) + dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); + + /* Hardware status page */ + dev_priv->saveHWS = I915_READ(HWS_PGA); + + /* Display arbitration control */ + dev_priv->saveDSPARB = I915_READ(DSPARB); + + /* This is only meaningful in non-KMS mode */ + /* Don't save them in KMS mode */ + i915_save_modeset_reg(dev); /* Cursor state */ dev_priv->saveCURACNTR = I915_READ(CURACNTR); dev_priv->saveCURAPOS = I915_READ(CURAPOS); @@ -322,6 +426,20 @@ int i915_save_state(struct drm_device *dev) dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + /* Display Port state */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + dev_priv->saveDP_B = I915_READ(DP_B); + dev_priv->saveDP_C = I915_READ(DP_C); + dev_priv->saveDP_D = I915_READ(DP_D); + dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M); + dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M); + dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N); + dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N); + dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M); + dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M); + dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N); + dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N); + } /* FIXME: save TV & SDVO state */ /* FBC state */ @@ -404,92 +522,21 @@ int i915_restore_state(struct drm_device *dev) for (i = 0; i < 8; i++) I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]); } - - /* Pipe & plane A info */ - /* Prime the clock */ - if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & - ~DPLL_VCO_ENABLE); - DRM_UDELAY(150); + + /* Display port ratios (must be done before clock is set) */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M); + I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M); + I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N); + I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N); + I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M); + I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M); + I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N); + I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N); } - I915_WRITE(FPA0, dev_priv->saveFPA0); - I915_WRITE(FPA1, dev_priv->saveFPA1); - /* Actually enable it */ - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); - DRM_UDELAY(150); - if (IS_I965G(dev)) - I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); - DRM_UDELAY(150); - - /* Restore mode */ - I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A); - I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A); - I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A); - I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); - I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); - I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); - I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); - - /* Restore plane info */ - I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); - I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS); - I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC); - I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR); - I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE); - if (IS_I965G(dev)) { - I915_WRITE(DSPASURF, dev_priv->saveDSPASURF); - I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF); - } - - I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF); - - i915_restore_palette(dev, PIPE_A); - /* Enable the plane */ - I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR); - I915_WRITE(DSPAADDR, I915_READ(DSPAADDR)); - - /* Pipe & plane B info */ - if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & - ~DPLL_VCO_ENABLE); - DRM_UDELAY(150); - } - I915_WRITE(FPB0, dev_priv->saveFPB0); - I915_WRITE(FPB1, dev_priv->saveFPB1); - /* Actually enable it */ - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); - DRM_UDELAY(150); - if (IS_I965G(dev)) - I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); - DRM_UDELAY(150); - - /* Restore mode */ - I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B); - I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B); - I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B); - I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); - I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); - I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); - I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); - - /* Restore plane info */ - I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); - I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS); - I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC); - I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR); - I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE); - if (IS_I965G(dev)) { - I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF); - I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF); - } - - I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF); - - i915_restore_palette(dev, PIPE_B); - /* Enable the plane */ - I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); - I915_WRITE(DSPBADDR, I915_READ(DSPBADDR)); - + /* This is only meaningful in non-KMS mode */ + /* Don't restore them in KMS mode */ + i915_restore_modeset_reg(dev); /* Cursor state */ I915_WRITE(CURAPOS, dev_priv->saveCURAPOS); I915_WRITE(CURACNTR, dev_priv->saveCURACNTR); @@ -518,6 +565,12 @@ int i915_restore_state(struct drm_device *dev) I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + /* Display Port state */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + I915_WRITE(DP_B, dev_priv->saveDP_B); + I915_WRITE(DP_C, dev_priv->saveDP_C); + I915_WRITE(DP_D, dev_priv->saveDP_D); + } /* FIXME: restore TV & SDVO state */ /* FBC info */ diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index cdd126d..7cc4471 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -97,11 +97,14 @@ static void parse_lfp_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) { + struct drm_device *dev = dev_priv->dev; struct bdb_lvds_options *lvds_options; struct bdb_lvds_lfp_data *lvds_lfp_data; + struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; struct bdb_lvds_lfp_data_entry *entry; struct lvds_dvo_timing *dvo_timing; struct drm_display_mode *panel_fixed_mode; + int lfp_data_size; /* Defaults if we can't find VBT info */ dev_priv->lvds_dither = 0; @@ -119,10 +122,25 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, if (!lvds_lfp_data) return; + lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS); + if (!lvds_lfp_data_ptrs) + return; + dev_priv->lvds_vbt = 1; - entry = &lvds_lfp_data->data[lvds_options->panel_type]; - dvo_timing = &entry->dvo_timing; + lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset - + lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset; + entry = (struct bdb_lvds_lfp_data_entry *) + ((uint8_t *)lvds_lfp_data->data + (lfp_data_size * + lvds_options->panel_type)); + + /* On IGDNG mobile, LVDS data block removes panel fitting registers. + So dec 2 dword from dvo_timing offset */ + if (IS_IGDNG(dev)) + dvo_timing = (struct lvds_dvo_timing *) + ((u8 *)&entry->dvo_timing - 8); + else + dvo_timing = &entry->dvo_timing; panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); @@ -185,10 +203,12 @@ parse_general_features(struct drm_i915_private *dev_priv, dev_priv->lvds_use_ssc = general->enable_ssc; if (dev_priv->lvds_use_ssc) { - if (IS_I855(dev_priv->dev)) - dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48; - else - dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96; + if (IS_I85X(dev_priv->dev)) + dev_priv->lvds_ssc_freq = + general->ssc_freq ? 66 : 48; + else + dev_priv->lvds_ssc_freq = + general->ssc_freq ? 100 : 96; } } } diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 6de97fc..d6a1a6e 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -46,7 +46,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode) temp = I915_READ(reg); temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); - temp |= ADPA_DAC_ENABLE; + temp &= ~ADPA_DAC_ENABLE; switch(mode) { case DRM_MODE_DPMS_ON: @@ -428,8 +428,34 @@ static void intel_crt_destroy(struct drm_connector *connector) static int intel_crt_get_modes(struct drm_connector *connector) { + int ret; struct intel_output *intel_output = to_intel_output(connector); - return intel_ddc_get_modes(intel_output); + struct i2c_adapter *ddcbus; + struct drm_device *dev = connector->dev; + + + ret = intel_ddc_get_modes(intel_output); + if (ret || !IS_G4X(dev)) + goto end; + + ddcbus = intel_output->ddc_bus; + /* Try to probe digital port for output in DVI-I -> VGA mode. */ + intel_output->ddc_bus = + intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D"); + + if (!intel_output->ddc_bus) { + intel_output->ddc_bus = ddcbus; + dev_printk(KERN_ERR, &connector->dev->pdev->dev, + "DDC bus registration failed for CRTDDC_D.\n"); + goto end; + } + /* Try to get modes by GPIOD port */ + ret = intel_ddc_get_modes(intel_output); + intel_i2c_destroy(ddcbus); + +end: + return ret; + } static int intel_crt_set_property(struct drm_connector *connector, diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3e1c781..508838e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -25,14 +25,17 @@ */ #include <linux/i2c.h> +#include <linux/kernel.h> #include "drmP.h" #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" +#include "intel_dp.h" #include "drm_crtc_helper.h" bool intel_pipe_has_type (struct drm_crtc *crtc, int type); +static void intel_update_watermarks(struct drm_device *dev); typedef struct { /* given values */ @@ -127,19 +130,6 @@ struct intel_limit { #define I9XX_P2_LVDS_FAST 7 #define I9XX_P2_LVDS_SLOW_LIMIT 112000 -#define INTEL_LIMIT_I8XX_DVO_DAC 0 -#define INTEL_LIMIT_I8XX_LVDS 1 -#define INTEL_LIMIT_I9XX_SDVO_DAC 2 -#define INTEL_LIMIT_I9XX_LVDS 3 -#define INTEL_LIMIT_G4X_SDVO 4 -#define INTEL_LIMIT_G4X_HDMI_DAC 5 -#define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS 6 -#define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS 7 -#define INTEL_LIMIT_IGD_SDVO_DAC 8 -#define INTEL_LIMIT_IGD_LVDS 9 -#define INTEL_LIMIT_IGDNG_SDVO_DAC 10 -#define INTEL_LIMIT_IGDNG_LVDS 11 - /*The parameter is for SDVO on G4x platform*/ #define G4X_DOT_SDVO_MIN 25000 #define G4X_DOT_SDVO_MAX 270000 @@ -218,6 +208,25 @@ struct intel_limit { #define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0 +/*The parameter is for DISPLAY PORT on G4x platform*/ +#define G4X_DOT_DISPLAY_PORT_MIN 161670 +#define G4X_DOT_DISPLAY_PORT_MAX 227000 +#define G4X_N_DISPLAY_PORT_MIN 1 +#define G4X_N_DISPLAY_PORT_MAX 2 +#define G4X_M_DISPLAY_PORT_MIN 97 +#define G4X_M_DISPLAY_PORT_MAX 108 +#define G4X_M1_DISPLAY_PORT_MIN 0x10 +#define G4X_M1_DISPLAY_PORT_MAX 0x12 +#define G4X_M2_DISPLAY_PORT_MIN 0x05 +#define G4X_M2_DISPLAY_PORT_MAX 0x06 +#define G4X_P_DISPLAY_PORT_MIN 10 +#define G4X_P_DISPLAY_PORT_MAX 20 +#define G4X_P1_DISPLAY_PORT_MIN 1 +#define G4X_P1_DISPLAY_PORT_MAX 2 +#define G4X_P2_DISPLAY_PORT_SLOW 10 +#define G4X_P2_DISPLAY_PORT_FAST 10 +#define G4X_P2_DISPLAY_PORT_LIMIT 0 + /* IGDNG */ /* as we calculate clock using (register_value + 2) for N/M1/M2, so here the range value for them is (actual_value-2). @@ -256,8 +265,11 @@ static bool intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); -static const intel_limit_t intel_limits[] = { - { /* INTEL_LIMIT_I8XX_DVO_DAC */ +static bool +intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *best_clock); + +static const intel_limit_t intel_limits_i8xx_dvo = { .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, @@ -269,8 +281,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_I8XX_LVDS */ +}; + +static const intel_limit_t intel_limits_i8xx_lvds = { .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, @@ -282,8 +295,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_I9XX_SDVO_DAC */ +}; + +static const intel_limit_t intel_limits_i9xx_sdvo = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, @@ -295,8 +309,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_I9XX_LVDS */ +}; + +static const intel_limit_t intel_limits_i9xx_lvds = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, @@ -311,9 +326,10 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, - }, +}; + /* below parameter and function is for G4X Chipset Family*/ - { /* INTEL_LIMIT_G4X_SDVO */ +static const intel_limit_t intel_limits_g4x_sdvo = { .dot = { .min = G4X_DOT_SDVO_MIN, .max = G4X_DOT_SDVO_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, .n = { .min = G4X_N_SDVO_MIN, .max = G4X_N_SDVO_MAX }, @@ -327,8 +343,9 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_SDVO_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_G4X_HDMI_DAC */ +}; + +static const intel_limit_t intel_limits_g4x_hdmi = { .dot = { .min = G4X_DOT_HDMI_DAC_MIN, .max = G4X_DOT_HDMI_DAC_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, .n = { .min = G4X_N_HDMI_DAC_MIN, .max = G4X_N_HDMI_DAC_MAX }, @@ -342,8 +359,9 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_HDMI_DAC_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS */ +}; + +static const intel_limit_t intel_limits_g4x_single_channel_lvds = { .dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN, .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX }, .vco = { .min = G4X_VCO_MIN, @@ -365,8 +383,9 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS */ +}; + +static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { .dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN, .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX }, .vco = { .min = G4X_VCO_MIN, @@ -388,8 +407,32 @@ static const intel_limit_t intel_limits[] = { .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, - }, - { /* INTEL_LIMIT_IGD_SDVO */ +}; + +static const intel_limit_t intel_limits_g4x_display_port = { + .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN, + .max = G4X_DOT_DISPLAY_PORT_MAX }, + .vco = { .min = G4X_VCO_MIN, + .max = G4X_VCO_MAX}, + .n = { .min = G4X_N_DISPLAY_PORT_MIN, + .max = G4X_N_DISPLAY_PORT_MAX }, + .m = { .min = G4X_M_DISPLAY_PORT_MIN, + .max = G4X_M_DISPLAY_PORT_MAX }, + .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN, + .max = G4X_M1_DISPLAY_PORT_MAX }, + .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN, + .max = G4X_M2_DISPLAY_PORT_MAX }, + .p = { .min = G4X_P_DISPLAY_PORT_MIN, + .max = G4X_P_DISPLAY_PORT_MAX }, + .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN, + .max = G4X_P1_DISPLAY_PORT_MAX}, + .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT, + .p2_slow = G4X_P2_DISPLAY_PORT_SLOW, + .p2_fast = G4X_P2_DISPLAY_PORT_FAST }, + .find_pll = intel_find_pll_g4x_dp, +}; + +static const intel_limit_t intel_limits_igd_sdvo = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX}, .vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX }, .n = { .min = IGD_N_MIN, .max = IGD_N_MAX }, @@ -401,8 +444,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_IGD_LVDS */ +}; + +static const intel_limit_t intel_limits_igd_lvds = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX }, .n = { .min = IGD_N_MIN, .max = IGD_N_MAX }, @@ -415,8 +459,9 @@ static const intel_limit_t intel_limits[] = { .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW }, .find_pll = intel_find_best_PLL, - }, - { /* INTEL_LIMIT_IGDNG_SDVO_DAC */ +}; + +static const intel_limit_t intel_limits_igdng_sdvo = { .dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX }, .vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX }, .n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX }, @@ -429,8 +474,9 @@ static const intel_limit_t intel_limits[] = { .p2_slow = IGDNG_P2_SDVO_DAC_SLOW, .p2_fast = IGDNG_P2_SDVO_DAC_FAST }, .find_pll = intel_igdng_find_best_PLL, - }, - { /* INTEL_LIMIT_IGDNG_LVDS */ +}; + +static const intel_limit_t intel_limits_igdng_lvds = { .dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX }, .vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX }, .n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX }, @@ -443,16 +489,15 @@ static const intel_limit_t intel_limits[] = { .p2_slow = IGDNG_P2_LVDS_SLOW, .p2_fast = IGDNG_P2_LVDS_FAST }, .find_pll = intel_igdng_find_best_PLL, - }, }; static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc) { const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS]; + limit = &intel_limits_igdng_lvds; else - limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC]; + limit = &intel_limits_igdng_sdvo; return limit; } @@ -467,19 +512,19 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) /* LVDS with dual channel */ - limit = &intel_limits - [INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS]; + limit = &intel_limits_g4x_dual_channel_lvds; else /* LVDS with dual channel */ - limit = &intel_limits - [INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS]; + limit = &intel_limits_g4x_single_channel_lvds; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) || intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) { - limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC]; + limit = &intel_limits_g4x_hdmi; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { - limit = &intel_limits[INTEL_LIMIT_G4X_SDVO]; + limit = &intel_limits_g4x_sdvo; + } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) { + limit = &intel_limits_g4x_display_port; } else /* The option is for other outputs */ - limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + limit = &intel_limits_i9xx_sdvo; return limit; } @@ -495,19 +540,19 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc) limit = intel_g4x_limit(crtc); } else if (IS_I9XX(dev) && !IS_IGD(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS]; + limit = &intel_limits_i9xx_lvds; else - limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + limit = &intel_limits_i9xx_sdvo; } else if (IS_IGD(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_IGD_LVDS]; + limit = &intel_limits_igd_lvds; else - limit = &intel_limits[INTEL_LIMIT_IGD_SDVO_DAC]; + limit = &intel_limits_igd_sdvo; } else { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS]; + limit = &intel_limits_i8xx_lvds; else - limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC]; + limit = &intel_limits_i8xx_dvo; } return limit; } @@ -764,6 +809,32 @@ out: return found; } +/* DisplayPort has only two frequencies, 162MHz and 270MHz */ +static bool +intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *best_clock) +{ + intel_clock_t clock; + if (target < 200000) { + clock.p1 = 2; + clock.p2 = 10; + clock.n = 2; + clock.m1 = 23; + clock.m2 = 8; + } else { + clock.p1 = 1; + clock.p2 = 10; + clock.n = 1; + clock.m1 = 14; + clock.m2 = 2; + } + clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); + clock.p = (clock.p1 * clock.p2); + clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; + memcpy(best_clock, &clock, sizeof(intel_clock_t)); + return true; +} + void intel_wait_for_vblank(struct drm_device *dev) { @@ -933,7 +1004,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int plane = intel_crtc->pipe; + int plane = intel_crtc->plane; int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; @@ -1263,8 +1334,10 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) /* Give the overlay scaler a chance to enable if it's on this pipe */ //intel_crtc_dpms_video(crtc, true); TODO + intel_update_watermarks(dev); break; case DRM_MODE_DPMS_OFF: + intel_update_watermarks(dev); /* Give the overlay scaler a chance to disable if it's on this pipe */ //intel_crtc_dpms_video(crtc, FALSE); TODO @@ -1443,7 +1516,6 @@ static int intel_get_core_clock_speed(struct drm_device *dev) return 0; /* Silence gcc warning */ } - /** * Return the pipe currently connected to the panel fitter, * or -1 if the panel fitter is not present or not in use @@ -1502,7 +1574,7 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes, temp = (u64) DATA_N * pixel_clock; temp = div_u64(temp, link_clock); - m_n->gmch_m = (temp * bytes_per_pixel) / nlanes; + m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes); m_n->gmch_n = DATA_N; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); @@ -1513,6 +1585,420 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes, } +struct intel_watermark_params { + unsigned long fifo_size; + unsigned long max_wm; + unsigned long default_wm; + unsigned long guard_size; + unsigned long cacheline_size; +}; + +/* IGD has different values for various configs */ +static struct intel_watermark_params igd_display_wm = { + IGD_DISPLAY_FIFO, + IGD_MAX_WM, + IGD_DFT_WM, + IGD_GUARD_WM, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params igd_display_hplloff_wm = { + IGD_DISPLAY_FIFO, + IGD_MAX_WM, + IGD_DFT_HPLLOFF_WM, + IGD_GUARD_WM, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params igd_cursor_wm = { + IGD_CURSOR_FIFO, + IGD_CURSOR_MAX_WM, + IGD_CURSOR_DFT_WM, + IGD_CURSOR_GUARD_WM, + IGD_FIFO_LINE_SIZE, +}; +static struct intel_watermark_params igd_cursor_hplloff_wm = { + IGD_CURSOR_FIFO, + IGD_CURSOR_MAX_WM, + IGD_CURSOR_DFT_WM, + IGD_CURSOR_GUARD_WM, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i945_wm_info = { + I915_FIFO_LINE_SIZE, + I915_MAX_WM, + 1, + 0, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i915_wm_info = { + I945_FIFO_SIZE, + I915_MAX_WM, + 1, + 0, + I915_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i855_wm_info = { + I855GM_FIFO_SIZE, + I915_MAX_WM, + 1, + 0, + I830_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i830_wm_info = { + I830_FIFO_SIZE, + I915_MAX_WM, + 1, + 0, + I830_FIFO_LINE_SIZE +}; + +static unsigned long intel_calculate_wm(unsigned long clock_in_khz, + struct intel_watermark_params *wm, + int pixel_size, + unsigned long latency_ns) +{ + unsigned long bytes_required, wm_size; + + bytes_required = (clock_in_khz * pixel_size * latency_ns) / 1000000; + bytes_required /= wm->cacheline_size; + wm_size = wm->fifo_size - bytes_required - wm->guard_size; + + if (wm_size > wm->max_wm) + wm_size = wm->max_wm; + if (wm_size == 0) + wm_size = wm->default_wm; + return wm_size; +} + +struct cxsr_latency { + int is_desktop; + unsigned long fsb_freq; + unsigned long mem_freq; + unsigned long display_sr; + unsigned long display_hpll_disable; + unsigned long cursor_sr; + unsigned long cursor_hpll_disable; +}; + +static struct cxsr_latency cxsr_latency_table[] = { + {1, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */ + {1, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */ + {1, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */ + + {1, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */ + {1, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */ + {1, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */ + + {1, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */ + {1, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */ + {1, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */ + + {0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */ + {0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */ + {0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */ + + {0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */ + {0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */ + {0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */ + + {0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */ + {0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */ + {0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */ +}; + +static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb, + int mem) +{ + int i; + struct cxsr_latency *latency; + + if (fsb == 0 || mem == 0) + return NULL; + + for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) { + latency = &cxsr_latency_table[i]; + if (is_desktop == latency->is_desktop && + fsb == latency->fsb_freq && mem == latency->mem_freq) + break; + } + if (i >= ARRAY_SIZE(cxsr_latency_table)) { + DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n"); + return NULL; + } + return latency; +} + +static void igd_disable_cxsr(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg; + + /* deactivate cxsr */ + reg = I915_READ(DSPFW3); + reg &= ~(IGD_SELF_REFRESH_EN); + I915_WRITE(DSPFW3, reg); + DRM_INFO("Big FIFO is disabled\n"); +} + +static void igd_enable_cxsr(struct drm_device *dev, unsigned long clock, + int pixel_size) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg; + unsigned long wm; + struct cxsr_latency *latency; + + latency = intel_get_cxsr_latency(IS_IGDG(dev), dev_priv->fsb_freq, + dev_priv->mem_freq); + if (!latency) { + DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n"); + igd_disable_cxsr(dev); + return; + } + + /* Display SR */ + wm = intel_calculate_wm(clock, &igd_display_wm, pixel_size, + latency->display_sr); + reg = I915_READ(DSPFW1); + reg &= 0x7fffff; + reg |= wm << 23; + I915_WRITE(DSPFW1, reg); + DRM_DEBUG("DSPFW1 register is %x\n", reg); + + /* cursor SR */ + wm = intel_calculate_wm(clock, &igd_cursor_wm, pixel_size, + latency->cursor_sr); + reg = I915_READ(DSPFW3); + reg &= ~(0x3f << 24); + reg |= (wm & 0x3f) << 24; + I915_WRITE(DSPFW3, reg); + + /* Display HPLL off SR */ + wm = intel_calculate_wm(clock, &igd_display_hplloff_wm, + latency->display_hpll_disable, I915_FIFO_LINE_SIZE); + reg = I915_READ(DSPFW3); + reg &= 0xfffffe00; + reg |= wm & 0x1ff; + I915_WRITE(DSPFW3, reg); + + /* cursor HPLL off SR */ + wm = intel_calculate_wm(clock, &igd_cursor_hplloff_wm, pixel_size, + latency->cursor_hpll_disable); + reg = I915_READ(DSPFW3); + reg &= ~(0x3f << 16); + reg |= (wm & 0x3f) << 16; + I915_WRITE(DSPFW3, reg); + DRM_DEBUG("DSPFW3 register is %x\n", reg); + + /* activate cxsr */ + reg = I915_READ(DSPFW3); + reg |= IGD_SELF_REFRESH_EN; + I915_WRITE(DSPFW3, reg); + + DRM_INFO("Big FIFO is enabled\n"); + + return; +} + +const static int latency_ns = 5000; /* default for non-igd platforms */ + + +static void i965_update_wm(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + DRM_DEBUG("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 8\n"); + + /* 965 has limitations... */ + I915_WRITE(DSPFW1, (8 << 16) | (8 << 8) | (8 << 0)); + I915_WRITE(DSPFW2, (8 << 8) | (8 << 0)); +} + +static void i9xx_update_wm(struct drm_device *dev, int planea_clock, + int planeb_clock, int sr_hdisplay, int pixel_size) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK; + uint32_t fwater_hi = I915_READ(FW_BLC2) & LM_FIFO_WATERMARK; + int bsize, asize, cwm, bwm = 1, awm = 1, srwm = 1; + uint32_t dsparb = I915_READ(DSPARB); + int planea_entries, planeb_entries; + struct intel_watermark_params *wm_params; + unsigned long line_time_us; + int sr_clock, sr_entries = 0; + + if (IS_I965GM(dev) || IS_I945GM(dev)) + wm_params = &i945_wm_info; + else if (IS_I9XX(dev)) + wm_params = &i915_wm_info; + else + wm_params = &i855_wm_info; + + planea_entries = intel_calculate_wm(planea_clock, wm_params, + pixel_size, latency_ns); + planeb_entries = intel_calculate_wm(planeb_clock, wm_params, + pixel_size, latency_ns); + + DRM_DEBUG("FIFO entries - A: %d, B: %d\n", planea_entries, + planeb_entries); + + if (IS_I9XX(dev)) { + asize = dsparb & 0x7f; + bsize = (dsparb >> DSPARB_CSTART_SHIFT) & 0x7f; + } else { + asize = dsparb & 0x1ff; + bsize = (dsparb >> DSPARB_BEND_SHIFT) & 0x1ff; + } + DRM_DEBUG("FIFO size - A: %d, B: %d\n", asize, bsize); + + /* Two extra entries for padding */ + awm = asize - (planea_entries + 2); + bwm = bsize - (planeb_entries + 2); + + /* Sanity check against potentially bad FIFO allocations */ + if (awm <= 0) { + /* pipe is on but has too few FIFO entries */ + if (planea_entries != 0) + DRM_DEBUG("plane A needs more FIFO entries\n"); + awm = 1; + } + if (bwm <= 0) { + if (planeb_entries != 0) + DRM_DEBUG("plane B needs more FIFO entries\n"); + bwm = 1; + } + + /* + * Overlay gets an aggressive default since video jitter is bad. + */ + cwm = 2; + + /* Calc sr entries for one pipe configs */ + if (!planea_clock || !planeb_clock) { + sr_clock = planea_clock ? planea_clock : planeb_clock; + line_time_us = (sr_hdisplay * 1000) / sr_clock; + sr_entries = (((latency_ns / line_time_us) + 1) * pixel_size * + sr_hdisplay) / 1000; + sr_entries = roundup(sr_entries / wm_params->cacheline_size, 1); + if (sr_entries < wm_params->fifo_size) + srwm = wm_params->fifo_size - sr_entries; + } + + DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", + awm, bwm, cwm, srwm); + + fwater_lo = fwater_lo | ((bwm & 0x3f) << 16) | (awm & 0x3f); + fwater_hi = fwater_hi | (cwm & 0x1f); + + I915_WRITE(FW_BLC, fwater_lo); + I915_WRITE(FW_BLC2, fwater_hi); + if (IS_I9XX(dev)) + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f)); +} + +static void i830_update_wm(struct drm_device *dev, int planea_clock, + int pixel_size) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dsparb = I915_READ(DSPARB); + uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK; + unsigned int asize, awm; + int planea_entries; + + planea_entries = intel_calculate_wm(planea_clock, &i830_wm_info, + pixel_size, latency_ns); + + asize = dsparb & 0x7f; + + awm = asize - planea_entries; + + fwater_lo = fwater_lo | awm; + + I915_WRITE(FW_BLC, fwater_lo); +} + +/** + * intel_update_watermarks - update FIFO watermark values based on current modes + * + * Calculate watermark values for the various WM regs based on current mode + * and plane configuration. + * + * There are several cases to deal with here: + * - normal (i.e. non-self-refresh) + * - self-refresh (SR) mode + * - lines are large relative to FIFO size (buffer can hold up to 2) + * - lines are small relative to FIFO size (buffer can hold more than 2 + * lines), so need to account for TLB latency + * + * The normal calculation is: + * watermark = dotclock * bytes per pixel * latency + * where latency is platform & configuration dependent (we assume pessimal + * values here). + * + * The SR calculation is: + * watermark = (trunc(latency/line time)+1) * surface width * + * bytes per pixel + * where + * line time = htotal / dotclock + * and latency is assumed to be high, as above. + * + * The final value programmed to the register should always be rounded up, + * and include an extra 2 entries to account for clock crossings. + * + * We don't use the sprite, so we can ignore that. And on Crestline we have + * to set the non-SR watermarks to 8. + */ +static void intel_update_watermarks(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct intel_crtc *intel_crtc; + int sr_hdisplay = 0; + unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0; + int enabled = 0, pixel_size = 0; + + if (DSPARB_HWCONTROL(dev)) + return; + + /* Get the clock config from both planes */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + intel_crtc = to_intel_crtc(crtc); + if (crtc->enabled) { + enabled++; + if (intel_crtc->plane == 0) { + DRM_DEBUG("plane A (pipe %d) clock: %d\n", + intel_crtc->pipe, crtc->mode.clock); + planea_clock = crtc->mode.clock; + } else { + DRM_DEBUG("plane B (pipe %d) clock: %d\n", + intel_crtc->pipe, crtc->mode.clock); + planeb_clock = crtc->mode.clock; + } + sr_hdisplay = crtc->mode.hdisplay; + sr_clock = crtc->mode.clock; + if (crtc->fb) + pixel_size = crtc->fb->bits_per_pixel / 8; + else + pixel_size = 4; /* by default */ + } + } + + if (enabled <= 0) + return; + + /* Single pipe configs can enable self refresh */ + if (enabled == 1 && IS_IGD(dev)) + igd_enable_cxsr(dev, sr_clock, pixel_size); + else if (IS_IGD(dev)) + igd_disable_cxsr(dev); + + if (IS_I965G(dev)) + i965_update_wm(dev); + else if (IS_I9XX(dev) || IS_MOBILE(dev)) + i9xx_update_wm(dev, planea_clock, planeb_clock, sr_hdisplay, + pixel_size); + else + i830_update_wm(dev, planea_clock, pixel_size); +} + static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -1541,7 +2027,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, intel_clock_t clock; u32 dpll = 0, fp = 0, dspcntr, pipeconf; bool ok, is_sdvo = false, is_dvo = false; - bool is_crt = false, is_lvds = false, is_tv = false; + bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; const intel_limit_t *limit; @@ -1585,6 +2071,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, case INTEL_OUTPUT_ANALOG: is_crt = true; break; + case INTEL_OUTPUT_DISPLAYPORT: + is_dp = true; + break; } num_outputs++; @@ -1600,6 +2089,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } else { refclk = 48000; } + /* * Returns a set of divisors for the desired target clock with the given @@ -1662,6 +2152,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, else if (IS_IGDNG(dev)) dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } + if (is_dp) + dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ if (IS_IGD(dev)) @@ -1809,6 +2301,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(lvds_reg, lvds); I915_READ(lvds_reg); } + if (is_dp) + intel_dp_set_m_n(crtc, mode, adjusted_mode); I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll); @@ -1871,6 +2365,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Flush the plane changes */ ret = intel_pipe_set_base(crtc, x, y, old_fb); + + intel_update_watermarks(dev); + drm_vblank_post_modeset(dev, pipe); return ret; @@ -2359,6 +2856,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); intel_crtc->pipe = pipe; + intel_crtc->plane = pipe; for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; intel_crtc->lut_g[i] = i; @@ -2475,6 +2973,8 @@ static void intel_setup_outputs(struct drm_device *dev) found = intel_sdvo_init(dev, SDVOB); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) intel_hdmi_init(dev, SDVOB); + if (!found && SUPPORTS_INTEGRATED_DP(dev)) + intel_dp_init(dev, DP_B); } /* Before G4X SDVOC doesn't have its own detect register */ @@ -2487,7 +2987,11 @@ static void intel_setup_outputs(struct drm_device *dev) found = intel_sdvo_init(dev, SDVOC); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) intel_hdmi_init(dev, SDVOC); + if (!found && SUPPORTS_INTEGRATED_DP(dev)) + intel_dp_init(dev, DP_C); } + if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) + intel_dp_init(dev, DP_D); } else intel_dvo_init(dev); @@ -2530,6 +3034,11 @@ static void intel_setup_outputs(struct drm_device *dev) (1 << 1)); clone_mask = (1 << INTEL_OUTPUT_TVOUT); break; + case INTEL_OUTPUT_DISPLAYPORT: + crtc_mask = ((1 << 0) | + (1 << 1)); + clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT); + break; } encoder->possible_crtcs = crtc_mask; encoder->possible_clones = intel_connector_clones(dev, clone_mask); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c new file mode 100644 index 0000000..6770ae8 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -0,0 +1,1156 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Keith Packard <keithp@keithp.com> + * + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "intel_dp.h" + +#define DP_LINK_STATUS_SIZE 6 +#define DP_LINK_CHECK_TIMEOUT (10 * 1000) + +#define DP_LINK_CONFIGURATION_SIZE 9 + +struct intel_dp_priv { + uint32_t output_reg; + uint32_t DP; + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]; + uint32_t save_DP; + uint8_t save_link_configuration[DP_LINK_CONFIGURATION_SIZE]; + bool has_audio; + int dpms_mode; + uint8_t link_bw; + uint8_t lane_count; + uint8_t dpcd[4]; + struct intel_output *intel_output; + struct i2c_adapter adapter; + struct i2c_algo_dp_aux_data algo; +}; + +static void +intel_dp_link_train(struct intel_output *intel_output, uint32_t DP, + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]); + +static void +intel_dp_link_down(struct intel_output *intel_output, uint32_t DP); + +static int +intel_dp_max_lane_count(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int max_lane_count = 4; + + if (dp_priv->dpcd[0] >= 0x11) { + max_lane_count = dp_priv->dpcd[2] & 0x1f; + switch (max_lane_count) { + case 1: case 2: case 4: + break; + default: + max_lane_count = 4; + } + } + return max_lane_count; +} + +static int +intel_dp_max_link_bw(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int max_link_bw = dp_priv->dpcd[1]; + + switch (max_link_bw) { + case DP_LINK_BW_1_62: + case DP_LINK_BW_2_7: + break; + default: + max_link_bw = DP_LINK_BW_1_62; + break; + } + return max_link_bw; +} + +static int +intel_dp_link_clock(uint8_t link_bw) +{ + if (link_bw == DP_LINK_BW_2_7) + return 270000; + else + return 162000; +} + +/* I think this is a fiction */ +static int +intel_dp_link_required(int pixel_clock) +{ + return pixel_clock * 3; +} + +static int +intel_dp_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct intel_output *intel_output = to_intel_output(connector); + int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output)); + int max_lanes = intel_dp_max_lane_count(intel_output); + + if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes) + return MODE_CLOCK_HIGH; + + if (mode->clock < 10000) + return MODE_CLOCK_LOW; + + return MODE_OK; +} + +static uint32_t +pack_aux(uint8_t *src, int src_bytes) +{ + int i; + uint32_t v = 0; + + if (src_bytes > 4) + src_bytes = 4; + for (i = 0; i < src_bytes; i++) + v |= ((uint32_t) src[i]) << ((3-i) * 8); + return v; +} + +static void +unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) +{ + int i; + if (dst_bytes > 4) + dst_bytes = 4; + for (i = 0; i < dst_bytes; i++) + dst[i] = src >> ((3-i) * 8); +} + +/* hrawclock is 1/4 the FSB frequency */ +static int +intel_hrawclk(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t clkcfg; + + clkcfg = I915_READ(CLKCFG); + switch (clkcfg & CLKCFG_FSB_MASK) { + case CLKCFG_FSB_400: + return 100; + case CLKCFG_FSB_533: + return 133; + case CLKCFG_FSB_667: + return 166; + case CLKCFG_FSB_800: + return 200; + case CLKCFG_FSB_1067: + return 266; + case CLKCFG_FSB_1333: + return 333; + /* these two are just a guess; one of them might be right */ + case CLKCFG_FSB_1600: + case CLKCFG_FSB_1600_ALT: + return 400; + default: + return 133; + } +} + +static int +intel_dp_aux_ch(struct intel_output *intel_output, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_size) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint32_t output_reg = dp_priv->output_reg; + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t ch_ctl = output_reg + 0x10; + uint32_t ch_data = ch_ctl + 4; + int i; + int recv_bytes; + uint32_t ctl; + uint32_t status; + uint32_t aux_clock_divider; + int try; + + /* The clock divider is based off the hrawclk, + * and would like to run at 2MHz. So, take the + * hrawclk value and divide by 2 and use that + */ + aux_clock_divider = intel_hrawclk(dev) / 2; + /* Must try at least 3 times according to DP spec */ + for (try = 0; try < 5; try++) { + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4) { + uint32_t d = pack_aux(send + i, send_bytes - i);; + + I915_WRITE(ch_data + i, d); + } + + ctl = (DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_TIME_OUT_400us | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + + /* Send the command and wait for it to complete */ + I915_WRITE(ch_ctl, ctl); + (void) I915_READ(ch_ctl); + for (;;) { + udelay(100); + status = I915_READ(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + } + + /* Clear done status and any errors */ + I915_WRITE(ch_ctl, (ctl | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR)); + (void) I915_READ(ch_ctl); + if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0) + break; + } + + if ((status & DP_AUX_CH_CTL_DONE) == 0) { + DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status); + return -EBUSY; + } + + /* Check for timeout or receive error. + * Timeouts occur when the sink is not connected + */ + if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { + DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status); + return -EIO; + } + + /* Timeouts occur when the device isn't connected, so they're + * "normal" -- don't fill the kernel log with these */ + if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { + DRM_DEBUG("dp_aux_ch timeout status 0x%08x\n", status); + return -ETIMEDOUT; + } + + /* Unload any bytes sent back from the other side */ + recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> + DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); + + if (recv_bytes > recv_size) + recv_bytes = recv_size; + + for (i = 0; i < recv_bytes; i += 4) { + uint32_t d = I915_READ(ch_data + i); + + unpack_aux(d, recv + i, recv_bytes - i); + } + + return recv_bytes; +} + +/* Write data to the aux channel in native mode */ +static int +intel_dp_aux_native_write(struct intel_output *intel_output, + uint16_t address, uint8_t *send, int send_bytes) +{ + int ret; + uint8_t msg[20]; + int msg_bytes; + uint8_t ack; + + if (send_bytes > 16) + return -1; + msg[0] = AUX_NATIVE_WRITE << 4; + msg[1] = address >> 8; + msg[2] = address; + msg[3] = send_bytes - 1; + memcpy(&msg[4], send, send_bytes); + msg_bytes = send_bytes + 4; + for (;;) { + ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1); + if (ret < 0) + return ret; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) + break; + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -EIO; + } + return send_bytes; +} + +/* Write a single byte to the aux channel in native mode */ +static int +intel_dp_aux_native_write_1(struct intel_output *intel_output, + uint16_t address, uint8_t byte) +{ + return intel_dp_aux_native_write(intel_output, address, &byte, 1); +} + +/* read bytes from a native aux channel */ +static int +intel_dp_aux_native_read(struct intel_output *intel_output, + uint16_t address, uint8_t *recv, int recv_bytes) +{ + uint8_t msg[4]; + int msg_bytes; + uint8_t reply[20]; + int reply_bytes; + uint8_t ack; + int ret; + + msg[0] = AUX_NATIVE_READ << 4; + msg[1] = address >> 8; + msg[2] = address & 0xff; + msg[3] = recv_bytes - 1; + + msg_bytes = 4; + reply_bytes = recv_bytes + 1; + + for (;;) { + ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, + reply, reply_bytes); + if (ret == 0) + return -EPROTO; + if (ret < 0) + return ret; + ack = reply[0]; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) { + memcpy(recv, reply + 1, ret - 1); + return ret - 1; + } + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -EIO; + } +} + +static int +intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_bytes) +{ + struct intel_dp_priv *dp_priv = container_of(adapter, + struct intel_dp_priv, + adapter); + struct intel_output *intel_output = dp_priv->intel_output; + + return intel_dp_aux_ch(intel_output, + send, send_bytes, recv, recv_bytes); +} + +static int +intel_dp_i2c_init(struct intel_output *intel_output, const char *name) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + DRM_ERROR("i2c_init %s\n", name); + dp_priv->algo.running = false; + dp_priv->algo.address = 0; + dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch; + + memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter)); + dp_priv->adapter.owner = THIS_MODULE; + dp_priv->adapter.class = I2C_CLASS_DDC; + strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1); + dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0'; + dp_priv->adapter.algo_data = &dp_priv->algo; + dp_priv->adapter.dev.parent = &intel_output->base.kdev; + + return i2c_dp_aux_add_bus(&dp_priv->adapter); +} + +static bool +intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int lane_count, clock; + int max_lane_count = intel_dp_max_lane_count(intel_output); + int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0; + static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; + + for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { + for (clock = 0; clock <= max_clock; clock++) { + int link_avail = intel_dp_link_clock(bws[clock]) * lane_count; + + if (intel_dp_link_required(mode->clock) <= link_avail) { + dp_priv->link_bw = bws[clock]; + dp_priv->lane_count = lane_count; + adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw); + DRM_DEBUG("Display port link bw %02x lane count %d clock %d\n", + dp_priv->link_bw, dp_priv->lane_count, + adjusted_mode->clock); + return true; + } + } + } + return false; +} + +struct intel_dp_m_n { + uint32_t tu; + uint32_t gmch_m; + uint32_t gmch_n; + uint32_t link_m; + uint32_t link_n; +}; + +static void +intel_reduce_ratio(uint32_t *num, uint32_t *den) +{ + while (*num > 0xffffff || *den > 0xffffff) { + *num >>= 1; + *den >>= 1; + } +} + +static void +intel_dp_compute_m_n(int bytes_per_pixel, + int nlanes, + int pixel_clock, + int link_clock, + struct intel_dp_m_n *m_n) +{ + m_n->tu = 64; + m_n->gmch_m = pixel_clock * bytes_per_pixel; + m_n->gmch_n = link_clock * nlanes; + intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; + intel_reduce_ratio(&m_n->link_m, &m_n->link_n); +} + +void +intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int lane_count = 4; + struct intel_dp_m_n m_n; + + /* + * Find the lane count in the intel_output private + */ + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (!connector->encoder || connector->encoder->crtc != crtc) + continue; + + if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) { + lane_count = dp_priv->lane_count; + break; + } + } + + /* + * Compute the GMCH and Link ratios. The '3' here is + * the number of bytes_per_pixel post-LUT, which we always + * set up for 8-bits of R/G/B, or 3 bytes total. + */ + intel_dp_compute_m_n(3, lane_count, + mode->clock, adjusted_mode->clock, &m_n); + + if (intel_crtc->pipe == 0) { + I915_WRITE(PIPEA_GMCH_DATA_M, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(PIPEA_GMCH_DATA_N, + m_n.gmch_n); + I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m); + I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n); + } else { + I915_WRITE(PIPEB_GMCH_DATA_M, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(PIPEB_GMCH_DATA_N, + m_n.gmch_n); + I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m); + I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n); + } +} + +static void +intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + struct drm_crtc *crtc = intel_output->enc.crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + dp_priv->DP = (DP_LINK_TRAIN_OFF | + DP_VOLTAGE_0_4 | + DP_PRE_EMPHASIS_0 | + DP_SYNC_VS_HIGH | + DP_SYNC_HS_HIGH); + + switch (dp_priv->lane_count) { + case 1: + dp_priv->DP |= DP_PORT_WIDTH_1; + break; + case 2: + dp_priv->DP |= DP_PORT_WIDTH_2; + break; + case 4: + dp_priv->DP |= DP_PORT_WIDTH_4; + break; + } + if (dp_priv->has_audio) + dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE; + + memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); + dp_priv->link_configuration[0] = dp_priv->link_bw; + dp_priv->link_configuration[1] = dp_priv->lane_count; + + /* + * Check for DPCD version > 1.1, + * enable enahanced frame stuff in that case + */ + if (dp_priv->dpcd[0] >= 0x11) { + dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + dp_priv->DP |= DP_ENHANCED_FRAMING; + } + + if (intel_crtc->pipe == 1) + dp_priv->DP |= DP_PIPEB_SELECT; +} + + +static void +intel_dp_dpms(struct drm_encoder *encoder, int mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dp_reg = I915_READ(dp_priv->output_reg); + + if (mode != DRM_MODE_DPMS_ON) { + if (dp_reg & DP_PORT_EN) + intel_dp_link_down(intel_output, dp_priv->DP); + } else { + if (!(dp_reg & DP_PORT_EN)) + intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); + } + dp_priv->dpms_mode = mode; +} + +/* + * Fetch AUX CH registers 0x202 - 0x207 which contain + * link status information + */ +static bool +intel_dp_get_link_status(struct intel_output *intel_output, + uint8_t link_status[DP_LINK_STATUS_SIZE]) +{ + int ret; + + ret = intel_dp_aux_native_read(intel_output, + DP_LANE0_1_STATUS, + link_status, DP_LINK_STATUS_SIZE); + if (ret != DP_LINK_STATUS_SIZE) + return false; + return true; +} + +static uint8_t +intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int r) +{ + return link_status[r - DP_LANE0_1_STATUS]; +} + +static void +intel_dp_save(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + dp_priv->save_DP = I915_READ(dp_priv->output_reg); + intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET, + dp_priv->save_link_configuration, + sizeof (dp_priv->save_link_configuration)); +} + +static uint8_t +intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : + DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); + uint8_t l = intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; +} + +static uint8_t +intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : + DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); + uint8_t l = intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; +} + + +#if 0 +static char *voltage_names[] = { + "0.4V", "0.6V", "0.8V", "1.2V" +}; +static char *pre_emph_names[] = { + "0dB", "3.5dB", "6dB", "9.5dB" +}; +static char *link_train_names[] = { + "pattern 1", "pattern 2", "idle", "off" +}; +#endif + +/* + * These are source-specific values; current Intel hardware supports + * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB + */ +#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 + +static uint8_t +intel_dp_pre_emphasis_max(uint8_t voltage_swing) +{ + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } +} + +static void +intel_get_adjust_train(struct intel_output *intel_output, + uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane_count, + uint8_t train_set[4]) +{ + uint8_t v = 0; + uint8_t p = 0; + int lane; + + for (lane = 0; lane < lane_count; lane++) { + uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane); + uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane); + + if (this_v > v) + v = this_v; + if (this_p > p) + p = this_p; + } + + if (v >= I830_DP_VOLTAGE_MAX) + v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + + if (p >= intel_dp_pre_emphasis_max(v)) + p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + for (lane = 0; lane < 4; lane++) + train_set[lane] = v | p; +} + +static uint32_t +intel_dp_signal_levels(uint8_t train_set, int lane_count) +{ + uint32_t signal_levels = 0; + + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + default: + signal_levels |= DP_VOLTAGE_0_4; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + signal_levels |= DP_VOLTAGE_0_6; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + signal_levels |= DP_VOLTAGE_0_8; + break; + case DP_TRAIN_VOLTAGE_SWING_1200: + signal_levels |= DP_VOLTAGE_1_2; + break; + } + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPHASIS_0: + default: + signal_levels |= DP_PRE_EMPHASIS_0; + break; + case DP_TRAIN_PRE_EMPHASIS_3_5: + signal_levels |= DP_PRE_EMPHASIS_3_5; + break; + case DP_TRAIN_PRE_EMPHASIS_6: + signal_levels |= DP_PRE_EMPHASIS_6; + break; + case DP_TRAIN_PRE_EMPHASIS_9_5: + signal_levels |= DP_PRE_EMPHASIS_9_5; + break; + } + return signal_levels; +} + +static uint8_t +intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_LANE0_1_STATUS + (lane >> 1); + int s = (lane & 1) * 4; + uint8_t l = intel_dp_link_status(link_status, i); + + return (l >> s) & 0xf; +} + +/* Check for clock recovery is done on all channels */ +static bool +intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +{ + int lane; + uint8_t lane_status; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = intel_get_lane_status(link_status, lane); + if ((lane_status & DP_LANE_CR_DONE) == 0) + return false; + } + return true; +} + +/* Check to see if channel eq is done on all channels */ +#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\ + DP_LANE_CHANNEL_EQ_DONE|\ + DP_LANE_SYMBOL_LOCKED) +static bool +intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +{ + uint8_t lane_align; + uint8_t lane_status; + int lane; + + lane_align = intel_dp_link_status(link_status, + DP_LANE_ALIGN_STATUS_UPDATED); + if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) + return false; + for (lane = 0; lane < lane_count; lane++) { + lane_status = intel_get_lane_status(link_status, lane); + if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) + return false; + } + return true; +} + +static bool +intel_dp_set_link_train(struct intel_output *intel_output, + uint32_t dp_reg_value, + uint8_t dp_train_pat, + uint8_t train_set[4], + bool first) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + int ret; + + I915_WRITE(dp_priv->output_reg, dp_reg_value); + POSTING_READ(dp_priv->output_reg); + if (first) + intel_wait_for_vblank(dev); + + intel_dp_aux_native_write_1(intel_output, + DP_TRAINING_PATTERN_SET, + dp_train_pat); + + ret = intel_dp_aux_native_write(intel_output, + DP_TRAINING_LANE0_SET, train_set, 4); + if (ret != 4) + return false; + + return true; +} + +static void +intel_dp_link_train(struct intel_output *intel_output, uint32_t DP, + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint8_t train_set[4]; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + int i; + uint8_t voltage; + bool clock_recovery = false; + bool channel_eq = false; + bool first = true; + int tries; + + /* Write the link configuration data */ + intel_dp_aux_native_write(intel_output, 0x100, + link_configuration, DP_LINK_CONFIGURATION_SIZE); + + DP |= DP_PORT_EN; + DP &= ~DP_LINK_TRAIN_MASK; + memset(train_set, 0, 4); + voltage = 0xff; + tries = 0; + clock_recovery = false; + for (;;) { + /* Use train_set[0] to set the voltage and pre emphasis values */ + uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count); + DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + + if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1, + DP_TRAINING_PATTERN_1, train_set, first)) + break; + first = false; + /* Set training pattern 1 */ + + udelay(100); + if (!intel_dp_get_link_status(intel_output, link_status)) + break; + + if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) { + clock_recovery = true; + break; + } + + /* Check to see if we've tried the max voltage */ + for (i = 0; i < dp_priv->lane_count; i++) + if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) + break; + if (i == dp_priv->lane_count) + break; + + /* Check to see if we've tried the same voltage 5 times */ + if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++tries; + if (tries == 5) + break; + } else + tries = 0; + voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + + /* Compute new train_set as requested by target */ + intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set); + } + + /* channel equalization */ + tries = 0; + channel_eq = false; + for (;;) { + /* Use train_set[0] to set the voltage and pre emphasis values */ + uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count); + DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; + + /* channel eq pattern */ + if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2, + DP_TRAINING_PATTERN_2, train_set, + false)) + break; + + udelay(400); + if (!intel_dp_get_link_status(intel_output, link_status)) + break; + + if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) { + channel_eq = true; + break; + } + + /* Try 5 times */ + if (tries > 5) + break; + + /* Compute new train_set as requested by target */ + intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set); + ++tries; + } + + I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF); + POSTING_READ(dp_priv->output_reg); + intel_dp_aux_native_write_1(intel_output, + DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE); +} + +static void +intel_dp_link_down(struct intel_output *intel_output, uint32_t DP) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN); + POSTING_READ(dp_priv->output_reg); +} + +static void +intel_dp_restore(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (dp_priv->save_DP & DP_PORT_EN) + intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration); + else + intel_dp_link_down(intel_output, dp_priv->save_DP); +} + +/* + * According to DP spec + * 5.1.2: + * 1. Read DPCD + * 2. Configure link according to Receiver Capabilities + * 3. Use Link Training from 2.5.3.3 and 3.5.1.3 + * 4. Check link status on receipt of hot-plug interrupt + */ + +static void +intel_dp_check_link_status(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + + if (!intel_output->enc.crtc) + return; + + if (!intel_dp_get_link_status(intel_output, link_status)) { + intel_dp_link_down(intel_output, dp_priv->DP); + return; + } + + if (!intel_channel_eq_ok(link_status, dp_priv->lane_count)) + intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); +} + +/** + * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. + * + * \return true if DP port is connected. + * \return false if DP port is disconnected. + */ +static enum drm_connector_status +intel_dp_detect(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + uint32_t temp, bit; + enum drm_connector_status status; + + dp_priv->has_audio = false; + + temp = I915_READ(PORT_HOTPLUG_EN); + + I915_WRITE(PORT_HOTPLUG_EN, + temp | + DPB_HOTPLUG_INT_EN | + DPC_HOTPLUG_INT_EN | + DPD_HOTPLUG_INT_EN); + + POSTING_READ(PORT_HOTPLUG_EN); + + switch (dp_priv->output_reg) { + case DP_B: + bit = DPB_HOTPLUG_INT_STATUS; + break; + case DP_C: + bit = DPC_HOTPLUG_INT_STATUS; + break; + case DP_D: + bit = DPD_HOTPLUG_INT_STATUS; + break; + default: + return connector_status_unknown; + } + + temp = I915_READ(PORT_HOTPLUG_STAT); + + if ((temp & bit) == 0) + return connector_status_disconnected; + + status = connector_status_disconnected; + if (intel_dp_aux_native_read(intel_output, + 0x000, dp_priv->dpcd, + sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd)) + { + if (dp_priv->dpcd[0] != 0) + status = connector_status_connected; + } + return status; +} + +static int intel_dp_get_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + /* We should parse the EDID data and find out if it has an audio sink + */ + + return intel_ddc_get_modes(intel_output); +} + +static void +intel_dp_destroy (struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->i2c_bus) + intel_i2c_destroy(intel_output->i2c_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(intel_output); +} + +static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = { + .dpms = intel_dp_dpms, + .mode_fixup = intel_dp_mode_fixup, + .prepare = intel_encoder_prepare, + .mode_set = intel_dp_mode_set, + .commit = intel_encoder_commit, +}; + +static const struct drm_connector_funcs intel_dp_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .save = intel_dp_save, + .restore = intel_dp_restore, + .detect = intel_dp_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_dp_destroy, +}; + +static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { + .get_modes = intel_dp_get_modes, + .mode_valid = intel_dp_mode_valid, + .best_encoder = intel_best_encoder, +}; + +static void intel_dp_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_dp_enc_funcs = { + .destroy = intel_dp_enc_destroy, +}; + +void +intel_dp_hot_plug(struct intel_output *intel_output) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON) + intel_dp_check_link_status(intel_output); +} + +void +intel_dp_init(struct drm_device *dev, int output_reg) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_connector *connector; + struct intel_output *intel_output; + struct intel_dp_priv *dp_priv; + + intel_output = kcalloc(sizeof(struct intel_output) + + sizeof(struct intel_dp_priv), 1, GFP_KERNEL); + if (!intel_output) + return; + + dp_priv = (struct intel_dp_priv *)(intel_output + 1); + + connector = &intel_output->base; + drm_connector_init(dev, connector, &intel_dp_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort); + drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); + + intel_output->type = INTEL_OUTPUT_DISPLAYPORT; + + connector->interlace_allowed = true; + connector->doublescan_allowed = 0; + + dp_priv->intel_output = intel_output; + dp_priv->output_reg = output_reg; + dp_priv->has_audio = false; + dp_priv->dpms_mode = DRM_MODE_DPMS_ON; + intel_output->dev_priv = dp_priv; + + drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs, + DRM_MODE_ENCODER_TMDS); + drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs); + + drm_mode_connector_attach_encoder(&intel_output->base, + &intel_output->enc); + drm_sysfs_connector_add(connector); + + /* Set up the DDC bus. */ + intel_dp_i2c_init(intel_output, + (output_reg == DP_B) ? "DPDDC-B" : + (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D"); + intel_output->ddc_bus = &dp_priv->adapter; + intel_output->hot_plug = intel_dp_hot_plug; + + /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written + * 0xd. Failure to do so will result in spurious interrupts being + * generated on the port when a cable is not attached. + */ + if (IS_G4X(dev) && !IS_GM45(dev)) { + u32 temp = I915_READ(PEG_BAND_GAP_DATA); + I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd); + } +} diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h new file mode 100644 index 0000000..2b38054 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp.h @@ -0,0 +1,144 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _INTEL_DP_H_ +#define _INTEL_DP_H_ + +/* From the VESA DisplayPort spec */ + +#define AUX_NATIVE_WRITE 0x8 +#define AUX_NATIVE_READ 0x9 +#define AUX_I2C_WRITE 0x0 +#define AUX_I2C_READ 0x1 +#define AUX_I2C_STATUS 0x2 +#define AUX_I2C_MOT 0x4 + +#define AUX_NATIVE_REPLY_ACK (0x0 << 4) +#define AUX_NATIVE_REPLY_NACK (0x1 << 4) +#define AUX_NATIVE_REPLY_DEFER (0x2 << 4) +#define AUX_NATIVE_REPLY_MASK (0x3 << 4) + +#define AUX_I2C_REPLY_ACK (0x0 << 6) +#define AUX_I2C_REPLY_NACK (0x1 << 6) +#define AUX_I2C_REPLY_DEFER (0x2 << 6) +#define AUX_I2C_REPLY_MASK (0x3 << 6) + +/* AUX CH addresses */ +#define DP_LINK_BW_SET 0x100 +# define DP_LINK_BW_1_62 0x06 +# define DP_LINK_BW_2_7 0x0a + +#define DP_LANE_COUNT_SET 0x101 +# define DP_LANE_COUNT_MASK 0x0f +# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) + +#define DP_TRAINING_PATTERN_SET 0x102 + +# define DP_TRAINING_PATTERN_DISABLE 0 +# define DP_TRAINING_PATTERN_1 1 +# define DP_TRAINING_PATTERN_2 2 +# define DP_TRAINING_PATTERN_MASK 0x3 + +# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_MASK (3 << 2) + +# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) +# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) + +# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) +# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) +# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) +# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) + +#define DP_TRAINING_LANE0_SET 0x103 +#define DP_TRAINING_LANE1_SET 0x104 +#define DP_TRAINING_LANE2_SET 0x105 +#define DP_TRAINING_LANE3_SET 0x106 + +# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 +# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 +# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) +# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0) +# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0) +# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0) +# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0) + +# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) +# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3) +# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3) +# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3) +# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3) + +# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 +# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) + +#define DP_DOWNSPREAD_CTRL 0x107 +# define DP_SPREAD_AMP_0_5 (1 << 4) + +#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 +# define DP_SET_ANSI_8B10B (1 << 0) + +#define DP_LANE0_1_STATUS 0x202 +#define DP_LANE2_3_STATUS 0x203 + +# define DP_LANE_CR_DONE (1 << 0) +# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) +# define DP_LANE_SYMBOL_LOCKED (1 << 2) + +#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 + +#define DP_INTERLANE_ALIGN_DONE (1 << 0) +#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DP_LINK_STATUS_UPDATED (1 << 7) + +#define DP_SINK_STATUS 0x205 + +#define DP_RECEIVE_PORT_0_STATUS (1 << 0) +#define DP_RECEIVE_PORT_1_STATUS (1 << 1) + +#define DP_ADJUST_REQUEST_LANE0_1 0x206 +#define DP_ADJUST_REQUEST_LANE2_3 0x207 + +#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 +#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 +#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c +#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 +#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 +#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 +#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 +#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 + +struct i2c_algo_dp_aux_data { + bool running; + u16 address; + int (*aux_ch) (struct i2c_adapter *adapter, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_bytes); +}; + +int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter); + +#endif /* _INTEL_DP_H_ */ diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c new file mode 100644 index 0000000..a63b6f5 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dp_i2c.c @@ -0,0 +1,273 @@ +/* + * Copyright © 2009 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/i2c.h> +#include "intel_dp.h" +#include "drmP.h" + +/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ + +#define MODE_I2C_START 1 +#define MODE_I2C_WRITE 2 +#define MODE_I2C_READ 4 +#define MODE_I2C_STOP 8 + +static int +i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, + uint8_t write_byte, uint8_t *read_byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + uint16_t address = algo_data->address; + uint8_t msg[5]; + uint8_t reply[2]; + int msg_bytes; + int reply_bytes; + int ret; + + /* Set up the command byte */ + if (mode & MODE_I2C_READ) + msg[0] = AUX_I2C_READ << 4; + else + msg[0] = AUX_I2C_WRITE << 4; + + if (!(mode & MODE_I2C_STOP)) + msg[0] |= AUX_I2C_MOT << 4; + + msg[1] = address >> 8; + msg[2] = address; + + switch (mode) { + case MODE_I2C_WRITE: + msg[3] = 0; + msg[4] = write_byte; + msg_bytes = 5; + reply_bytes = 1; + break; + case MODE_I2C_READ: + msg[3] = 0; + msg_bytes = 4; + reply_bytes = 2; + break; + default: + msg_bytes = 3; + reply_bytes = 1; + break; + } + + for (;;) { + ret = (*algo_data->aux_ch)(adapter, + msg, msg_bytes, + reply, reply_bytes); + if (ret < 0) { + DRM_DEBUG("aux_ch failed %d\n", ret); + return ret; + } + switch (reply[0] & AUX_I2C_REPLY_MASK) { + case AUX_I2C_REPLY_ACK: + if (mode == MODE_I2C_READ) { + *read_byte = reply[1]; + } + return reply_bytes - 1; + case AUX_I2C_REPLY_NACK: + DRM_DEBUG("aux_ch nack\n"); + return -EREMOTEIO; + case AUX_I2C_REPLY_DEFER: + DRM_DEBUG("aux_ch defer\n"); + udelay(100); + break; + default: + DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]); + return -EREMOTEIO; + } + } +} + +/* + * I2C over AUX CH + */ + +/* + * Send the address. If the I2C link is running, this 'restarts' + * the connection with the new address, this is used for doing + * a write followed by a read (as needed for DDC) + */ +static int +i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_START; + int ret; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + algo_data->address = address; + algo_data->running = true; + ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + return ret; +} + +/* + * Stop the I2C transaction. This closes out the link, sending + * a bare address packet with the MOT bit turned off + */ +static void +i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_STOP; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + if (algo_data->running) { + (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + algo_data->running = false; + } +} + +/* + * Write a single byte to the current I2C address, the + * the I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); + return ret; +} + +/* + * Read a single byte from the current I2C address, the + * I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); + return ret; +} + +static int +i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + int ret = 0; + bool reading = false; + int m; + int b; + + for (m = 0; m < num; m++) { + u16 len = msgs[m].len; + u8 *buf = msgs[m].buf; + reading = (msgs[m].flags & I2C_M_RD) != 0; + ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); + if (ret < 0) + break; + if (reading) { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); + if (ret < 0) + break; + } + } else { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); + if (ret < 0) + break; + } + } + if (ret < 0) + break; + } + if (ret >= 0) + ret = num; + i2c_algo_dp_aux_stop(adapter, reading); + DRM_DEBUG("dp_aux_xfer return %d\n", ret); + return ret; +} + +static u32 +i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_10BIT_ADDR; +} + +static const struct i2c_algorithm i2c_dp_aux_algo = { + .master_xfer = i2c_algo_dp_aux_xfer, + .functionality = i2c_algo_dp_aux_functionality, +}; + +static void +i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) +{ + (void) i2c_algo_dp_aux_address(adapter, 0, false); + (void) i2c_algo_dp_aux_stop(adapter, false); + +} + +static int +i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) +{ + adapter->algo = &i2c_dp_aux_algo; + adapter->retries = 3; + i2c_dp_aux_reset_bus(adapter); + return 0; +} + +int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter) +{ + int error; + + error = i2c_dp_aux_prepare_bus(adapter); + if (error) + return error; + error = i2c_add_adapter(adapter); + return error; +} +EXPORT_SYMBOL(i2c_dp_aux_add_bus); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index cd4b9c5..004541c 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -54,6 +54,7 @@ #define INTEL_OUTPUT_LVDS 4 #define INTEL_OUTPUT_TVOUT 5 #define INTEL_OUTPUT_HDMI 6 +#define INTEL_OUTPUT_DISPLAYPORT 7 #define INTEL_DVO_CHIP_NONE 0 #define INTEL_DVO_CHIP_LVDS 1 @@ -65,7 +66,6 @@ struct intel_i2c_chan { u32 reg; /* GPIO reg */ struct i2c_adapter adapter; struct i2c_algo_bit_data algo; - u8 slave_addr; }; struct intel_framebuffer { @@ -79,11 +79,12 @@ struct intel_output { struct drm_encoder enc; int type; - struct intel_i2c_chan *i2c_bus; /* for control functions */ - struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */ + struct i2c_adapter *i2c_bus; + struct i2c_adapter *ddc_bus; bool load_detect_temp; bool needs_tv_clock; void *dev_priv; + void (*hot_plug)(struct intel_output *); }; struct intel_crtc { @@ -104,9 +105,9 @@ struct intel_crtc { #define enc_to_intel_output(x) container_of(x, struct intel_output, enc) #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base) -struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, - const char *name); -void intel_i2c_destroy(struct intel_i2c_chan *chan); +struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg, + const char *name); +void intel_i2c_destroy(struct i2c_adapter *adapter); int intel_ddc_get_modes(struct intel_output *intel_output); extern bool intel_ddc_probe(struct intel_output *intel_output); void intel_i2c_quirk_set(struct drm_device *dev, bool enable); @@ -116,6 +117,10 @@ extern bool intel_sdvo_init(struct drm_device *dev, int output_device); extern void intel_dvo_init(struct drm_device *dev); extern void intel_tv_init(struct drm_device *dev); extern void intel_lvds_init(struct drm_device *dev); +extern void intel_dp_init(struct drm_device *dev, int dp_reg); +void +intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); extern void intel_crtc_load_lut(struct drm_crtc *crtc); extern void intel_encoder_prepare (struct drm_encoder *encoder); diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 1ee3007..13bff20 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -384,10 +384,9 @@ void intel_dvo_init(struct drm_device *dev) { struct intel_output *intel_output; struct intel_dvo_device *dvo; - struct intel_i2c_chan *i2cbus = NULL; + struct i2c_adapter *i2cbus = NULL; int ret = 0; int i; - int gpio_inited = 0; int encoder_type = DRM_MODE_ENCODER_NONE; intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) @@ -420,14 +419,11 @@ void intel_dvo_init(struct drm_device *dev) * It appears that everything is on GPIOE except for panels * on i830 laptops, which are on GPIOB (DVOA). */ - if (gpio_inited != gpio) { - if (i2cbus != NULL) - intel_i2c_destroy(i2cbus); - if (!(i2cbus = intel_i2c_create(dev, gpio, - gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) { - continue; - } - gpio_inited = gpio; + if (i2cbus != NULL) + intel_i2c_destroy(i2cbus); + if (!(i2cbus = intel_i2c_create(dev, gpio, + gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) { + continue; } if (dvo->dev_ops!= NULL) diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 1af7d68..1d30802 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -453,7 +453,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, size = ALIGN(size, PAGE_SIZE); fbo = drm_gem_object_alloc(dev, size); if (!fbo) { - printk(KERN_ERR "failed to allocate framebuffer\n"); + DRM_ERROR("failed to allocate framebuffer\n"); ret = -ENOMEM; goto out; } @@ -610,8 +610,8 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, par->dev = dev; /* To allow resizeing without swapping buffers */ - printk("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width, - intel_fb->base.height, obj_priv->gtt_offset, fbo); + DRM_DEBUG("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width, + intel_fb->base.height, obj_priv->gtt_offset, fbo); mutex_unlock(&dev->struct_mutex); return 0; @@ -698,13 +698,13 @@ static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc * } else intelfb_set_par(info); - printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, + DRM_INFO("fb%d: %s frame buffer device\n", info->node, info->fix.id); /* Switch back to kernel console on panic */ kernelfb_mode = *modeset; atomic_notifier_chain_register(&panic_notifier_list, &paniced); - printk(KERN_INFO "registered panic notifier\n"); + DRM_DEBUG("registered panic notifier\n"); return 0; } @@ -852,13 +852,13 @@ static int intelfb_single_fb_probe(struct drm_device *dev) } else intelfb_set_par(info); - printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, + DRM_INFO("fb%d: %s frame buffer device\n", info->node, info->fix.id); /* Switch back to kernel console on panic */ kernelfb_mode = *modeset; atomic_notifier_chain_register(&panic_notifier_list, &paniced); - printk(KERN_INFO "registered panic notifier\n"); + DRM_DEBUG("registered panic notifier\n"); return 0; } @@ -872,8 +872,8 @@ void intelfb_restore(void) { int ret; if ((ret = drm_crtc_helper_set_config(&kernelfb_mode)) != 0) { - printk(KERN_ERR "Failed to restore crtc configuration: %d\n", - ret); + DRM_ERROR("Failed to restore crtc configuration: %d\n", + ret); } } diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 4ea2a65..9e30daa 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -31,6 +31,7 @@ #include "drmP.h" #include "drm.h" #include "drm_crtc.h" +#include "drm_edid.h" #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" @@ -56,8 +57,7 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder, sdvox = SDVO_ENCODING_HDMI | SDVO_BORDER_ENABLE | SDVO_VSYNC_ACTIVE_HIGH | - SDVO_HSYNC_ACTIVE_HIGH | - SDVO_NULL_PACKETS_DURING_VSYNC; + SDVO_HSYNC_ACTIVE_HIGH; if (hdmi_priv->has_hdmi_sink) sdvox |= SDVO_AUDIO_ENABLE; @@ -129,20 +129,26 @@ static bool intel_hdmi_mode_fixup(struct drm_encoder *encoder, return true; } -static void -intel_hdmi_sink_detect(struct drm_connector *connector) +static enum drm_connector_status +intel_hdmi_edid_detect(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv; struct edid *edid = NULL; + enum drm_connector_status status = connector_status_disconnected; edid = drm_get_edid(&intel_output->base, - &intel_output->ddc_bus->adapter); - if (edid != NULL) { - hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid); - kfree(edid); + intel_output->ddc_bus); + hdmi_priv->has_hdmi_sink = false; + if (edid) { + if (edid->input & DRM_EDID_INPUT_DIGITAL) { + status = connector_status_connected; + hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid); + } intel_output->base.display_info.raw_edid = NULL; + kfree(edid); } + return status; } static enum drm_connector_status @@ -154,11 +160,7 @@ igdng_hdmi_detect(struct drm_connector *connector) /* FIXME hotplug detect */ hdmi_priv->has_hdmi_sink = false; - intel_hdmi_sink_detect(connector); - if (hdmi_priv->has_hdmi_sink) - return connector_status_connected; - else - return connector_status_disconnected; + return intel_hdmi_edid_detect(connector); } static enum drm_connector_status @@ -201,10 +203,9 @@ intel_hdmi_detect(struct drm_connector *connector) return connector_status_unknown; } - if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) { - intel_hdmi_sink_detect(connector); - return connector_status_connected; - } else + if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) + return intel_hdmi_edid_detect(connector); + else return connector_status_disconnected; } diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index f7061f6..62b8bea 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -124,6 +124,7 @@ static void set_data(void *data, int state_high) * @output: driver specific output device * @reg: GPIO reg to use * @name: name for this bus + * @slave_addr: slave address (if fixed) * * Creates and registers a new i2c bus with the Linux i2c layer, for use * in output probing and control (e.g. DDC or SDVO control functions). @@ -139,8 +140,8 @@ static void set_data(void *data, int state_high) * %GPIOH * see PRM for details on how these different busses are used. */ -struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, - const char *name) +struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg, + const char *name) { struct intel_i2c_chan *chan; @@ -174,7 +175,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, intel_i2c_quirk_set(dev, false); udelay(20); - return chan; + return &chan->adapter; out_free: kfree(chan); @@ -187,11 +188,16 @@ out_free: * * Unregister the adapter from the i2c layer, then free the structure. */ -void intel_i2c_destroy(struct intel_i2c_chan *chan) +void intel_i2c_destroy(struct i2c_adapter *adapter) { - if (!chan) + struct intel_i2c_chan *chan; + + if (!adapter) return; + chan = container_of(adapter, + struct intel_i2c_chan, + adapter); i2c_del_adapter(&chan->adapter); kfree(chan); } diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f073ed8..9ab38ef 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -36,9 +36,25 @@ #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" +#include <linux/acpi.h> #define I915_LVDS "i915_lvds" +/* + * the following four scaling options are defined. + * #define DRM_MODE_SCALE_NON_GPU 0 + * #define DRM_MODE_SCALE_FULLSCREEN 1 + * #define DRM_MODE_SCALE_NO_SCALE 2 + * #define DRM_MODE_SCALE_ASPECT 3 + */ + +/* Private structure for the integrated LVDS support */ +struct intel_lvds_priv { + int fitting_mode; + u32 pfit_control; + u32 pfit_pgm_ratios; +}; + /** * Sets the backlight level. * @@ -213,26 +229,45 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { + /* + * float point operation is not supported . So the PANEL_RATIO_FACTOR + * is defined, which can avoid the float point computation when + * calculating the panel ratio. + */ +#define PANEL_RATIO_FACTOR 8192 struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); struct drm_encoder *tmp_encoder; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; + u32 pfit_control = 0, pfit_pgm_ratios = 0; + int left_border = 0, right_border = 0, top_border = 0; + int bottom_border = 0; + bool border = 0; + int panel_ratio, desired_ratio, vert_scale, horiz_scale; + int horiz_ratio, vert_ratio; + u32 hsync_width, vsync_width; + u32 hblank_width, vblank_width; + u32 hsync_pos, vsync_pos; /* Should never happen!! */ if (!IS_I965G(dev) && intel_crtc->pipe == 0) { - printk(KERN_ERR "Can't support LVDS on pipe A\n"); + DRM_ERROR("Can't support LVDS on pipe A\n"); return false; } /* Should never happen!! */ list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) { if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) { - printk(KERN_ERR "Can't enable LVDS and another " + DRM_ERROR("Can't enable LVDS and another " "encoder on the same pipe\n"); return false; } } - + /* If we don't have a panel mode, there is nothing we can do */ + if (dev_priv->panel_fixed_mode == NULL) + return true; /* * If we have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode, @@ -256,6 +291,243 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); } + /* Make sure pre-965s set dither correctly */ + if (!IS_I965G(dev)) { + if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + } + + /* Native modes don't need fitting */ + if (adjusted_mode->hdisplay == mode->hdisplay && + adjusted_mode->vdisplay == mode->vdisplay) { + pfit_pgm_ratios = 0; + border = 0; + goto out; + } + + /* 965+ wants fuzzy fitting */ + if (IS_I965G(dev)) + pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) | + PFIT_FILTER_FUZZY; + + hsync_width = adjusted_mode->crtc_hsync_end - + adjusted_mode->crtc_hsync_start; + vsync_width = adjusted_mode->crtc_vsync_end - + adjusted_mode->crtc_vsync_start; + hblank_width = adjusted_mode->crtc_hblank_end - + adjusted_mode->crtc_hblank_start; + vblank_width = adjusted_mode->crtc_vblank_end - + adjusted_mode->crtc_vblank_start; + /* + * Deal with panel fitting options. Figure out how to stretch the + * image based on its aspect ratio & the current panel fitting mode. + */ + panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR / + adjusted_mode->vdisplay; + desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR / + mode->vdisplay; + /* + * Enable automatic panel scaling for non-native modes so that they fill + * the screen. Should be enabled before the pipe is enabled, according + * to register description and PRM. + * Change the value here to see the borders for debugging + */ + I915_WRITE(BCLRPAT_A, 0); + I915_WRITE(BCLRPAT_B, 0); + + switch (lvds_priv->fitting_mode) { + case DRM_MODE_SCALE_NO_SCALE: + /* + * For centered modes, we have to calculate border widths & + * heights and modify the values programmed into the CRTC. + */ + left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2; + right_border = left_border; + if (mode->hdisplay & 1) + right_border++; + top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2; + bottom_border = top_border; + if (mode->vdisplay & 1) + bottom_border++; + /* Set active & border values */ + adjusted_mode->crtc_hdisplay = mode->hdisplay; + /* Keep the boder be even */ + if (right_border & 1) + right_border++; + /* use the border directly instead of border minuse one */ + adjusted_mode->crtc_hblank_start = mode->hdisplay + + right_border; + /* keep the blank width constant */ + adjusted_mode->crtc_hblank_end = + adjusted_mode->crtc_hblank_start + hblank_width; + /* get the hsync pos relative to hblank start */ + hsync_pos = (hblank_width - hsync_width) / 2; + /* keep the hsync pos be even */ + if (hsync_pos & 1) + hsync_pos++; + adjusted_mode->crtc_hsync_start = + adjusted_mode->crtc_hblank_start + hsync_pos; + /* keep the hsync width constant */ + adjusted_mode->crtc_hsync_end = + adjusted_mode->crtc_hsync_start + hsync_width; + adjusted_mode->crtc_vdisplay = mode->vdisplay; + /* use the border instead of border minus one */ + adjusted_mode->crtc_vblank_start = mode->vdisplay + + bottom_border; + /* keep the vblank width constant */ + adjusted_mode->crtc_vblank_end = + adjusted_mode->crtc_vblank_start + vblank_width; + /* get the vsync start postion relative to vblank start */ + vsync_pos = (vblank_width - vsync_width) / 2; + adjusted_mode->crtc_vsync_start = + adjusted_mode->crtc_vblank_start + vsync_pos; + /* keep the vsync width constant */ + adjusted_mode->crtc_vsync_end = + adjusted_mode->crtc_vblank_start + vsync_width; + border = 1; + break; + case DRM_MODE_SCALE_ASPECT: + /* Scale but preserve the spect ratio */ + pfit_control |= PFIT_ENABLE; + if (IS_I965G(dev)) { + /* 965+ is easy, it does everything in hw */ + if (panel_ratio > desired_ratio) + pfit_control |= PFIT_SCALING_PILLAR; + else if (panel_ratio < desired_ratio) + pfit_control |= PFIT_SCALING_LETTER; + else + pfit_control |= PFIT_SCALING_AUTO; + } else { + /* + * For earlier chips we have to calculate the scaling + * ratio by hand and program it into the + * PFIT_PGM_RATIO register + */ + u32 horiz_bits, vert_bits, bits = 12; + horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/ + adjusted_mode->hdisplay; + vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/ + adjusted_mode->vdisplay; + horiz_scale = adjusted_mode->hdisplay * + PANEL_RATIO_FACTOR / mode->hdisplay; + vert_scale = adjusted_mode->vdisplay * + PANEL_RATIO_FACTOR / mode->vdisplay; + + /* retain aspect ratio */ + if (panel_ratio > desired_ratio) { /* Pillar */ + u32 scaled_width; + scaled_width = mode->hdisplay * vert_scale / + PANEL_RATIO_FACTOR; + horiz_ratio = vert_ratio; + pfit_control |= (VERT_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + /* Pillar will have left/right borders */ + left_border = (adjusted_mode->hdisplay - + scaled_width) / 2; + right_border = left_border; + if (mode->hdisplay & 1) /* odd resolutions */ + right_border++; + /* keep the border be even */ + if (right_border & 1) + right_border++; + adjusted_mode->crtc_hdisplay = scaled_width; + /* use border instead of border minus one */ + adjusted_mode->crtc_hblank_start = + scaled_width + right_border; + /* keep the hblank width constant */ + adjusted_mode->crtc_hblank_end = + adjusted_mode->crtc_hblank_start + + hblank_width; + /* + * get the hsync start pos relative to + * hblank start + */ + hsync_pos = (hblank_width - hsync_width) / 2; + /* keep the hsync_pos be even */ + if (hsync_pos & 1) + hsync_pos++; + adjusted_mode->crtc_hsync_start = + adjusted_mode->crtc_hblank_start + + hsync_pos; + /* keept hsync width constant */ + adjusted_mode->crtc_hsync_end = + adjusted_mode->crtc_hsync_start + + hsync_width; + border = 1; + } else if (panel_ratio < desired_ratio) { /* letter */ + u32 scaled_height = mode->vdisplay * + horiz_scale / PANEL_RATIO_FACTOR; + vert_ratio = horiz_ratio; + pfit_control |= (HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + /* Letterbox will have top/bottom border */ + top_border = (adjusted_mode->vdisplay - + scaled_height) / 2; + bottom_border = top_border; + if (mode->vdisplay & 1) + bottom_border++; + adjusted_mode->crtc_vdisplay = scaled_height; + /* use border instead of border minus one */ + adjusted_mode->crtc_vblank_start = + scaled_height + bottom_border; + /* keep the vblank width constant */ + adjusted_mode->crtc_vblank_end = + adjusted_mode->crtc_vblank_start + + vblank_width; + /* + * get the vsync start pos relative to + * vblank start + */ + vsync_pos = (vblank_width - vsync_width) / 2; + adjusted_mode->crtc_vsync_start = + adjusted_mode->crtc_vblank_start + + vsync_pos; + /* keep the vsync width constant */ + adjusted_mode->crtc_vsync_end = + adjusted_mode->crtc_vsync_start + + vsync_width; + border = 1; + } else { + /* Aspects match, Let hw scale both directions */ + pfit_control |= (VERT_AUTO_SCALE | + HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + } + horiz_bits = (1 << bits) * horiz_ratio / + PANEL_RATIO_FACTOR; + vert_bits = (1 << bits) * vert_ratio / + PANEL_RATIO_FACTOR; + pfit_pgm_ratios = + ((vert_bits << PFIT_VERT_SCALE_SHIFT) & + PFIT_VERT_SCALE_MASK) | + ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) & + PFIT_HORIZ_SCALE_MASK); + } + break; + + case DRM_MODE_SCALE_FULLSCREEN: + /* + * Full scaling, even if it changes the aspect ratio. + * Fortunately this is all done for us in hw. + */ + pfit_control |= PFIT_ENABLE; + if (IS_I965G(dev)) + pfit_control |= PFIT_SCALING_AUTO; + else + pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + break; + default: + break; + } + +out: + lvds_priv->pfit_control = pfit_control; + lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios; /* * XXX: It would be nice to support lower refresh rates on the * panels to reduce power consumption, and perhaps match the @@ -301,8 +573,8 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); - u32 pfit_control; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; /* * The LVDS pin pair will already have been turned on in the @@ -319,22 +591,8 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, * screen. Should be enabled before the pipe is enabled, according to * register description and PRM. */ - if (mode->hdisplay != adjusted_mode->hdisplay || - mode->vdisplay != adjusted_mode->vdisplay) - pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | - HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | - HORIZ_INTERP_BILINEAR); - else - pfit_control = 0; - - if (!IS_I965G(dev)) { - if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) - pfit_control |= PANEL_8TO6_DITHER_ENABLE; - } - else - pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT; - - I915_WRITE(PFIT_CONTROL, pfit_control); + I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios); + I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control); } /** @@ -406,6 +664,34 @@ static int intel_lvds_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { + struct drm_device *dev = connector->dev; + struct intel_output *intel_output = + to_intel_output(connector); + + if (property == dev->mode_config.scaling_mode_property && + connector->encoder) { + struct drm_crtc *crtc = connector->encoder->crtc; + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; + if (value == DRM_MODE_SCALE_NON_GPU) { + DRM_DEBUG_KMS(I915_LVDS, + "non_GPU property is unsupported\n"); + return 0; + } + if (lvds_priv->fitting_mode == value) { + /* the LVDS scaling property is not changed */ + return 0; + } + lvds_priv->fitting_mode = value; + if (crtc && crtc->enabled) { + /* + * If the CRTC is enabled, the display will be changed + * according to the new panel fitting mode. + */ + drm_crtc_helper_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, crtc->fb); + } + } + return 0; } @@ -456,7 +742,7 @@ static const struct dmi_system_id intel_no_lvds[] = { .callback = intel_no_lvds_dmi_callback, .ident = "Apple Mac Mini (Core series)", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_SYS_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), }, }, @@ -464,7 +750,7 @@ static const struct dmi_system_id intel_no_lvds[] = { .callback = intel_no_lvds_dmi_callback, .ident = "Apple Mac Mini (Core 2 series)", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_SYS_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"), }, }, @@ -503,6 +789,65 @@ static const struct dmi_system_id intel_no_lvds[] = { { } /* terminating entry */ }; +#ifdef CONFIG_ACPI +/* + * check_lid_device -- check whether @handle is an ACPI LID device. + * @handle: ACPI device handle + * @level : depth in the ACPI namespace tree + * @context: the number of LID device when we find the device + * @rv: a return value to fill if desired (Not use) + */ +static acpi_status +check_lid_device(acpi_handle handle, u32 level, void *context, + void **return_value) +{ + struct acpi_device *acpi_dev; + int *lid_present = context; + + acpi_dev = NULL; + /* Get the acpi device for device handle */ + if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) { + /* If there is no ACPI device for handle, return */ + return AE_OK; + } + + if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7)) + *lid_present = 1; + + return AE_OK; +} + +/** + * check whether there exists the ACPI LID device by enumerating the ACPI + * device tree. + */ +static int intel_lid_present(void) +{ + int lid_present = 0; + + if (acpi_disabled) { + /* If ACPI is disabled, there is no ACPI device tree to + * check, so assume the LID device would have been present. + */ + return 1; + } + + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + check_lid_device, &lid_present, NULL); + + return lid_present; +} +#else +static int intel_lid_present(void) +{ + /* In the absence of ACPI built in, assume that the LID device would + * have been present. + */ + return 1; +} +#endif + /** * intel_lvds_init - setup LVDS connectors on this device * @dev: drm device @@ -518,6 +863,7 @@ void intel_lvds_init(struct drm_device *dev) struct drm_encoder *encoder; struct drm_display_mode *scan; /* *modes, *bios_mode; */ struct drm_crtc *crtc; + struct intel_lvds_priv *lvds_priv; u32 lvds; int pipe, gpio = GPIOC; @@ -525,13 +871,24 @@ void intel_lvds_init(struct drm_device *dev) if (dmi_check_system(intel_no_lvds)) return; + /* Assume that any device without an ACPI LID device also doesn't + * have an integrated LVDS. We would be better off parsing the BIOS + * to get a reliable indicator, but that code isn't written yet. + * + * In the case of all-in-one desktops using LVDS that we've seen, + * they're using SDVO LVDS. + */ + if (!intel_lid_present()) + return; + if (IS_IGDNG(dev)) { if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0) return; gpio = PCH_GPIOC; } - intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); + intel_output = kzalloc(sizeof(struct intel_output) + + sizeof(struct intel_lvds_priv), GFP_KERNEL); if (!intel_output) { return; } @@ -553,7 +910,18 @@ void intel_lvds_init(struct drm_device *dev) connector->interlace_allowed = false; connector->doublescan_allowed = false; + lvds_priv = (struct intel_lvds_priv *)(intel_output + 1); + intel_output->dev_priv = lvds_priv; + /* create the scaling mode property */ + drm_mode_create_scaling_mode_property(dev); + /* + * the initial panel fitting mode will be FULL_SCREEN. + */ + drm_connector_attach_property(&intel_output->base, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN; /* * LVDS discovery: * 1) check for EDID on DDC @@ -649,5 +1017,5 @@ failed: if (intel_output->ddc_bus) intel_i2c_destroy(intel_output->ddc_bus); drm_connector_cleanup(connector); - kfree(connector); + kfree(intel_output); } diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index e0910fe..67e2f46 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -53,10 +53,9 @@ bool intel_ddc_probe(struct intel_output *intel_output) } }; - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); - ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2); - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); - + intel_i2c_quirk_set(intel_output->base.dev, true); + ret = i2c_transfer(intel_output->ddc_bus, msgs, 2); + intel_i2c_quirk_set(intel_output->base.dev, false); if (ret == 2) return true; @@ -74,10 +73,9 @@ int intel_ddc_get_modes(struct intel_output *intel_output) struct edid *edid; int ret = 0; - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); - edid = drm_get_edid(&intel_output->base, - &intel_output->ddc_bus->adapter); - intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); + intel_i2c_quirk_set(intel_output->base.dev, true); + edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus); + intel_i2c_quirk_set(intel_output->base.dev, false); if (edid) { drm_mode_connector_update_edid_property(&intel_output->base, edid); diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 9a00adb..4f0c309 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -38,8 +38,7 @@ #undef SDVO_DEBUG #define I915_SDVO "i915_sdvo" struct intel_sdvo_priv { - struct intel_i2c_chan *i2c_bus; - int slaveaddr; + u8 slave_addr; /* Register for the SDVO device: SDVOB or SDVOC */ int output_device; @@ -69,12 +68,23 @@ struct intel_sdvo_priv { * This is set if we treat the device as HDMI, instead of DVI. */ bool is_hdmi; + /** * This is set if we detect output of sdvo device as LVDS. */ bool is_lvds; /** + * This is sdvo flags for input timing. + */ + uint8_t sdvo_flags; + + /** + * This is sdvo fixed pannel mode pointer + */ + struct drm_display_mode *sdvo_lvds_fixed_mode; + + /** * Returned SDTV resolutions allowed for the current format, if the * device reported it. */ @@ -146,13 +156,13 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, struct i2c_msg msgs[] = { { - .addr = sdvo_priv->i2c_bus->slave_addr, + .addr = sdvo_priv->slave_addr >> 1, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = sdvo_priv->i2c_bus->slave_addr, + .addr = sdvo_priv->slave_addr >> 1, .flags = I2C_M_RD, .len = 1, .buf = buf, @@ -162,7 +172,7 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, out_buf[0] = addr; out_buf[1] = 0; - if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2) + if ((ret = i2c_transfer(intel_output->i2c_bus, msgs, 2)) == 2) { *ch = buf[0]; return true; @@ -175,10 +185,11 @@ static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, u8 ch) { + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; u8 out_buf[2]; struct i2c_msg msgs[] = { { - .addr = intel_output->i2c_bus->slave_addr, + .addr = sdvo_priv->slave_addr >> 1, .flags = 0, .len = 2, .buf = out_buf, @@ -188,7 +199,7 @@ static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, out_buf[0] = addr; out_buf[1] = ch; - if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1) + if (i2c_transfer(intel_output->i2c_bus, msgs, 1) == 1) { return true; } @@ -592,6 +603,7 @@ intel_sdvo_create_preferred_input_timing(struct intel_output *output, uint16_t height) { struct intel_sdvo_preferred_input_timing_args args; + struct intel_sdvo_priv *sdvo_priv = output->dev_priv; uint8_t status; memset(&args, 0, sizeof(args)); @@ -599,7 +611,12 @@ intel_sdvo_create_preferred_input_timing(struct intel_output *output, args.width = width; args.height = height; args.interlace = 0; - args.scaled = 0; + + if (sdvo_priv->is_lvds && + (sdvo_priv->sdvo_lvds_fixed_mode->hdisplay != width || + sdvo_priv->sdvo_lvds_fixed_mode->vdisplay != height)) + args.scaled = 1; + intel_sdvo_write_cmd(output, SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING, &args, sizeof(args)); status = intel_sdvo_read_response(output, NULL, 0); @@ -944,12 +961,7 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, struct intel_output *output = enc_to_intel_output(encoder); struct intel_sdvo_priv *dev_priv = output->dev_priv; - if (!dev_priv->is_tv) { - /* Make the CRTC code factor in the SDVO pixel multiplier. The - * SDVO device will be told of the multiplier during mode_set. - */ - adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); - } else { + if (dev_priv->is_tv) { struct intel_sdvo_dtd output_dtd; bool success; @@ -980,6 +992,7 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, intel_sdvo_get_preferred_input_timing(output, &input_dtd); intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd); + dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags; drm_mode_set_crtcinfo(adjusted_mode, 0); @@ -990,6 +1003,52 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, } else { return false; } + } else if (dev_priv->is_lvds) { + struct intel_sdvo_dtd output_dtd; + bool success; + + drm_mode_set_crtcinfo(dev_priv->sdvo_lvds_fixed_mode, 0); + /* Set output timings */ + intel_sdvo_get_dtd_from_mode(&output_dtd, + dev_priv->sdvo_lvds_fixed_mode); + + intel_sdvo_set_target_output(output, + dev_priv->controlled_output); + intel_sdvo_set_output_timing(output, &output_dtd); + + /* Set the input timing to the screen. Assume always input 0. */ + intel_sdvo_set_target_input(output, true, false); + + + success = intel_sdvo_create_preferred_input_timing( + output, + mode->clock / 10, + mode->hdisplay, + mode->vdisplay); + + if (success) { + struct intel_sdvo_dtd input_dtd; + + intel_sdvo_get_preferred_input_timing(output, + &input_dtd); + intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd); + dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags; + + drm_mode_set_crtcinfo(adjusted_mode, 0); + + mode->clock = adjusted_mode->clock; + + adjusted_mode->clock *= + intel_sdvo_get_pixel_multiplier(mode); + } else { + return false; + } + + } else { + /* Make the CRTC code factor in the SDVO pixel multiplier. The + * SDVO device will be told of the multiplier during mode_set. + */ + adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); } return true; } @@ -1033,15 +1092,16 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, /* We have tried to get input timing in mode_fixup, and filled into adjusted_mode */ - if (sdvo_priv->is_tv) + if (sdvo_priv->is_tv || sdvo_priv->is_lvds) { intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); - else + input_dtd.part2.sdvo_flags = sdvo_priv->sdvo_flags; + } else intel_sdvo_get_dtd_from_mode(&input_dtd, mode); /* If it's a TV, we already set the output timing in mode_fixup. * Otherwise, the output timing is equal to the input timing. */ - if (!sdvo_priv->is_tv) { + if (!sdvo_priv->is_tv && !sdvo_priv->is_lvds) { /* Set the output timing to the screen */ intel_sdvo_set_target_output(output, sdvo_priv->controlled_output); @@ -1116,6 +1176,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT; } + if (sdvo_priv->sdvo_flags & SDVO_NEED_TO_STALL) + sdvox |= SDVO_STALL_SELECT; intel_sdvo_write_sdvox(output, sdvox); } @@ -1276,6 +1338,17 @@ static int intel_sdvo_mode_valid(struct drm_connector *connector, if (sdvo_priv->pixel_clock_max < mode->clock) return MODE_CLOCK_HIGH; + if (sdvo_priv->is_lvds == true) { + if (sdvo_priv->sdvo_lvds_fixed_mode == NULL) + return MODE_PANEL; + + if (mode->hdisplay > sdvo_priv->sdvo_lvds_fixed_mode->hdisplay) + return MODE_PANEL; + + if (mode->vdisplay > sdvo_priv->sdvo_lvds_fixed_mode->vdisplay) + return MODE_PANEL; + } + return MODE_OK; } @@ -1369,9 +1442,8 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector) struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; struct edid *edid = NULL; - intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); edid = drm_get_edid(&intel_output->base, - &intel_output->ddc_bus->adapter); + intel_output->ddc_bus); if (edid != NULL) { sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid); kfree(edid); @@ -1549,23 +1621,21 @@ static void intel_sdvo_get_tv_modes(struct drm_connector *connector) static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); - struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; struct drm_i915_private *dev_priv = connector->dev->dev_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + struct drm_display_mode *newmode; /* * Attempt to get the mode list from DDC. * Assume that the preferred modes are * arranged in priority order. */ - /* set the bus switch and get the modes */ - intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); intel_ddc_get_modes(intel_output); if (list_empty(&connector->probed_modes) == false) - return; + goto end; /* Fetch modes from VBT */ if (dev_priv->sdvo_lvds_vbt_mode != NULL) { - struct drm_display_mode *newmode; newmode = drm_mode_duplicate(connector->dev, dev_priv->sdvo_lvds_vbt_mode); if (newmode != NULL) { @@ -1575,6 +1645,16 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) drm_mode_probed_add(connector, newmode); } } + +end: + list_for_each_entry(newmode, &connector->probed_modes, head) { + if (newmode->type & DRM_MODE_TYPE_PREFERRED) { + sdvo_priv->sdvo_lvds_fixed_mode = + drm_mode_duplicate(connector->dev, newmode); + break; + } + } + } static int intel_sdvo_get_modes(struct drm_connector *connector) @@ -1597,14 +1677,20 @@ static int intel_sdvo_get_modes(struct drm_connector *connector) static void intel_sdvo_destroy(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; if (intel_output->i2c_bus) intel_i2c_destroy(intel_output->i2c_bus); if (intel_output->ddc_bus) intel_i2c_destroy(intel_output->ddc_bus); + if (sdvo_priv->sdvo_lvds_fixed_mode != NULL) + drm_mode_destroy(connector->dev, + sdvo_priv->sdvo_lvds_fixed_mode); + drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); + kfree(intel_output); } @@ -1709,7 +1795,7 @@ intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - if (to_intel_output(connector)->ddc_bus == chan) { + if (to_intel_output(connector)->ddc_bus == &chan->adapter) { intel_output = to_intel_output(connector); break; } @@ -1723,7 +1809,7 @@ static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap, struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; struct i2c_algo_bit_data *algo_data; - struct i2c_algorithm *algo; + const struct i2c_algorithm *algo; algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data; intel_output = @@ -1733,7 +1819,7 @@ static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap, return -EINVAL; sdvo_priv = intel_output->dev_priv; - algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo; + algo = intel_output->i2c_bus->algo; intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); return algo->master_xfer(i2c_adap, msgs, num); @@ -1785,13 +1871,11 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) struct drm_connector *connector; struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; - struct intel_i2c_chan *i2cbus = NULL; - struct intel_i2c_chan *ddcbus = NULL; + int connector_type; u8 ch[0x40]; int i; - int encoder_type, output_id; - u8 slave_addr; + int encoder_type; intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL); if (!intel_output) { @@ -1799,29 +1883,24 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) } sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1); + sdvo_priv->output_device = output_device; + + intel_output->dev_priv = sdvo_priv; intel_output->type = INTEL_OUTPUT_SDVO; /* setup the DDC bus. */ if (output_device == SDVOB) - i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); + intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); else - i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); + intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); - if (!i2cbus) + if (!intel_output->i2c_bus) goto err_inteloutput; - slave_addr = intel_sdvo_get_slave_addr(dev, output_device); - sdvo_priv->i2c_bus = i2cbus; + sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, output_device); - if (output_device == SDVOB) { - output_id = 1; - } else { - output_id = 2; - } - sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1; - sdvo_priv->output_device = output_device; - intel_output->i2c_bus = i2cbus; - intel_output->dev_priv = sdvo_priv; + /* Save the bit-banging i2c functionality for use by the DDC wrapper */ + intel_sdvo_i2c_bit_algo.functionality = intel_output->i2c_bus->algo->functionality; /* Read the regs to test if we can talk to the device */ for (i = 0; i < 0x40; i++) { @@ -1835,17 +1914,15 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) /* setup the DDC bus. */ if (output_device == SDVOB) - ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); + intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); else - ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); + intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); - if (ddcbus == NULL) + if (intel_output->ddc_bus == NULL) goto err_i2c; - intel_sdvo_i2c_bit_algo.functionality = - intel_output->i2c_bus->adapter.algo->functionality; - ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo; - intel_output->ddc_bus = ddcbus; + /* Wrap with our custom algo which switches to DDC mode */ + intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo; /* In defaut case sdvo lvds is false */ sdvo_priv->is_lvds = false; @@ -1965,9 +2042,10 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) return true; err_i2c: - if (ddcbus != NULL) + if (intel_output->ddc_bus != NULL) intel_i2c_destroy(intel_output->ddc_bus); - intel_i2c_destroy(intel_output->i2c_bus); + if (intel_output->i2c_bus != NULL) + intel_i2c_destroy(intel_output->i2c_bus); err_inteloutput: kfree(intel_output); diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h index 193938b..ba5cdf8 100644 --- a/drivers/gpu/drm/i915/intel_sdvo_regs.h +++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h @@ -715,6 +715,7 @@ struct intel_sdvo_enhancements_arg { #define SDVO_HBUF_TX_ONCE (2 << 6) #define SDVO_HBUF_TX_VSYNC (3 << 6) #define SDVO_CMD_GET_AUDIO_TX_INFO 0x9c +#define SDVO_NEED_TO_STALL (1 << 7) struct intel_sdvo_encode{ u8 dvi_rev; diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index ea68992..a43c98e 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1383,34 +1383,31 @@ intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output) /* * Detect TV by polling) */ - if (intel_output->load_detect_temp) { - /* TV not currently running, prod it with destructive detect */ - save_tv_dac = tv_dac; - tv_ctl = I915_READ(TV_CTL); - save_tv_ctl = tv_ctl; - tv_ctl &= ~TV_ENC_ENABLE; - tv_ctl &= ~TV_TEST_MODE_MASK; - tv_ctl |= TV_TEST_MODE_MONITOR_DETECT; - tv_dac &= ~TVDAC_SENSE_MASK; - tv_dac &= ~DAC_A_MASK; - tv_dac &= ~DAC_B_MASK; - tv_dac &= ~DAC_C_MASK; - tv_dac |= (TVDAC_STATE_CHG_EN | - TVDAC_A_SENSE_CTL | - TVDAC_B_SENSE_CTL | - TVDAC_C_SENSE_CTL | - DAC_CTL_OVERRIDE | - DAC_A_0_7_V | - DAC_B_0_7_V | - DAC_C_0_7_V); - I915_WRITE(TV_CTL, tv_ctl); - I915_WRITE(TV_DAC, tv_dac); - intel_wait_for_vblank(dev); - tv_dac = I915_READ(TV_DAC); - I915_WRITE(TV_DAC, save_tv_dac); - I915_WRITE(TV_CTL, save_tv_ctl); - intel_wait_for_vblank(dev); - } + save_tv_dac = tv_dac; + tv_ctl = I915_READ(TV_CTL); + save_tv_ctl = tv_ctl; + tv_ctl &= ~TV_ENC_ENABLE; + tv_ctl &= ~TV_TEST_MODE_MASK; + tv_ctl |= TV_TEST_MODE_MONITOR_DETECT; + tv_dac &= ~TVDAC_SENSE_MASK; + tv_dac &= ~DAC_A_MASK; + tv_dac &= ~DAC_B_MASK; + tv_dac &= ~DAC_C_MASK; + tv_dac |= (TVDAC_STATE_CHG_EN | + TVDAC_A_SENSE_CTL | + TVDAC_B_SENSE_CTL | + TVDAC_C_SENSE_CTL | + DAC_CTL_OVERRIDE | + DAC_A_0_7_V | + DAC_B_0_7_V | + DAC_C_0_7_V); + I915_WRITE(TV_CTL, tv_ctl); + I915_WRITE(TV_DAC, tv_dac); + intel_wait_for_vblank(dev); + tv_dac = I915_READ(TV_DAC); + I915_WRITE(TV_DAC, save_tv_dac); + I915_WRITE(TV_CTL, save_tv_ctl); + intel_wait_for_vblank(dev); /* * A B C * 0 1 1 Composite diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index f30aa72..f97563d 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -35,6 +35,23 @@ #include "atom.h" /* + * Clear GPU surface registers. + */ +static void radeon_surface_init(struct radeon_device *rdev) +{ + /* FIXME: check this out */ + if (rdev->family < CHIP_R600) { + int i; + + for (i = 0; i < 8; i++) { + WREG32(RADEON_SURFACE0_INFO + + i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO), + 0); + } + } +} + +/* * GPU scratch registers helpers function. */ static void radeon_scratch_init(struct radeon_device *rdev) @@ -496,6 +513,8 @@ int radeon_device_init(struct radeon_device *rdev, radeon_errata(rdev); /* Initialize scratch registers */ radeon_scratch_init(rdev); + /* Initialize surface registers */ + radeon_surface_init(rdev); /* TODO: disable VGA need to use VGA request */ /* BIOS*/ @@ -604,9 +623,6 @@ int radeon_device_init(struct radeon_device *rdev, if (r) { return r; } - if (rdev->fbdev_rfb && rdev->fbdev_rfb->obj) { - rdev->fbdev_robj = rdev->fbdev_rfb->obj->driver_private; - } if (!ret) { DRM_INFO("radeon: kernel modesetting successfully initialized.\n"); } diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 09c9fb9..84ba69f 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -345,7 +345,7 @@ static void __exit radeon_exit(void) drm_exit(driver); } -late_initcall(radeon_init); +module_init(radeon_init); module_exit(radeon_exit); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index fa86d39..9e8f191 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -478,14 +478,16 @@ int radeonfb_create(struct radeon_device *rdev, { struct fb_info *info; struct radeon_fb_device *rfbdev; - struct drm_framebuffer *fb; + struct drm_framebuffer *fb = NULL; struct radeon_framebuffer *rfb; struct drm_mode_fb_cmd mode_cmd; struct drm_gem_object *gobj = NULL; struct radeon_object *robj = NULL; struct device *device = &rdev->pdev->dev; int size, aligned_size, ret; + u64 fb_gpuaddr; void *fbptr = NULL; + unsigned long tmp; mode_cmd.width = surface_width; mode_cmd.height = surface_height; @@ -498,11 +500,12 @@ int radeonfb_create(struct radeon_device *rdev, aligned_size = ALIGN(size, PAGE_SIZE); ret = radeon_gem_object_create(rdev, aligned_size, 0, - RADEON_GEM_DOMAIN_VRAM, - false, ttm_bo_type_kernel, - false, &gobj); + RADEON_GEM_DOMAIN_VRAM, + false, ttm_bo_type_kernel, + false, &gobj); if (ret) { - printk(KERN_ERR "failed to allocate framebuffer\n"); + printk(KERN_ERR "failed to allocate framebuffer (%d %d)\n", + surface_width, surface_height); ret = -ENOMEM; goto out; } @@ -515,12 +518,19 @@ int radeonfb_create(struct radeon_device *rdev, ret = -ENOMEM; goto out_unref; } + ret = radeon_object_pin(robj, RADEON_GEM_DOMAIN_VRAM, &fb_gpuaddr); + if (ret) { + printk(KERN_ERR "failed to pin framebuffer\n"); + ret = -ENOMEM; + goto out_unref; + } list_add(&fb->filp_head, &rdev->ddev->mode_config.fb_kernel_list); rfb = to_radeon_framebuffer(fb); *rfb_p = rfb; rdev->fbdev_rfb = rfb; + rdev->fbdev_robj = robj; info = framebuffer_alloc(sizeof(struct radeon_fb_device), device); if (info == NULL) { @@ -541,13 +551,13 @@ int radeonfb_create(struct radeon_device *rdev, info->fix.xpanstep = 1; /* doing it in hw */ info->fix.ypanstep = 1; /* doing it in hw */ info->fix.ywrapstep = 0; - info->fix.accel = FB_ACCEL_I830; + info->fix.accel = FB_ACCEL_NONE; info->fix.type_aux = 0; info->flags = FBINFO_DEFAULT; info->fbops = &radeonfb_ops; info->fix.line_length = fb->pitch; - info->screen_base = fbptr; - info->fix.smem_start = (unsigned long)fbptr; + tmp = fb_gpuaddr - rdev->mc.vram_location; + info->fix.smem_start = rdev->mc.aper_base + tmp; info->fix.smem_len = size; info->screen_base = fbptr; info->screen_size = size; @@ -562,8 +572,8 @@ int radeonfb_create(struct radeon_device *rdev, info->var.width = -1; info->var.xres = fb_width; info->var.yres = fb_height; - info->fix.mmio_start = pci_resource_start(rdev->pdev, 2); - info->fix.mmio_len = pci_resource_len(rdev->pdev, 2); + info->fix.mmio_start = 0; + info->fix.mmio_len = 0; info->pixmap.size = 64*1024; info->pixmap.buf_align = 8; info->pixmap.access_align = 32; @@ -644,7 +654,7 @@ out_unref: if (robj) { radeon_object_kunmap(robj); } - if (ret) { + if (fb && ret) { list_del(&fb->filp_head); drm_gem_object_unreference(gobj); drm_framebuffer_cleanup(fb); @@ -813,6 +823,7 @@ int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb) robj = rfb->obj->driver_private; unregister_framebuffer(info); radeon_object_kunmap(robj); + radeon_object_unpin(robj); framebuffer_release(info); } diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 983e8df..bac0d06 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -223,7 +223,6 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain, { uint32_t flags; uint32_t tmp; - void *fbptr; int r; flags = radeon_object_flags_from_domain(domain); @@ -242,10 +241,6 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain, DRM_ERROR("radeon: failed to reserve object for pinning it.\n"); return r; } - if (robj->rdev->fbdev_robj == robj) { - mutex_lock(&robj->rdev->fbdev_info->lock); - radeon_object_kunmap(robj); - } tmp = robj->tobj.mem.placement; ttm_flag_masked(&tmp, flags, TTM_PL_MASK_MEM); robj->tobj.proposed_placement = tmp | TTM_PL_FLAG_NO_EVICT | TTM_PL_MASK_CACHING; @@ -261,23 +256,12 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain, DRM_ERROR("radeon: failed to pin object.\n"); } radeon_object_unreserve(robj); - if (robj->rdev->fbdev_robj == robj) { - if (!r) { - r = radeon_object_kmap(robj, &fbptr); - } - if (!r) { - robj->rdev->fbdev_info->screen_base = fbptr; - robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr; - } - mutex_unlock(&robj->rdev->fbdev_info->lock); - } return r; } void radeon_object_unpin(struct radeon_object *robj) { uint32_t flags; - void *fbptr; int r; spin_lock(&robj->tobj.lock); @@ -297,10 +281,6 @@ void radeon_object_unpin(struct radeon_object *robj) DRM_ERROR("radeon: failed to reserve object for unpinning it.\n"); return; } - if (robj->rdev->fbdev_robj == robj) { - mutex_lock(&robj->rdev->fbdev_info->lock); - radeon_object_kunmap(robj); - } flags = robj->tobj.mem.placement; robj->tobj.proposed_placement = flags & ~TTM_PL_FLAG_NO_EVICT; r = ttm_buffer_object_validate(&robj->tobj, @@ -310,16 +290,6 @@ void radeon_object_unpin(struct radeon_object *robj) DRM_ERROR("radeon: failed to unpin buffer.\n"); } radeon_object_unreserve(robj); - if (robj->rdev->fbdev_robj == robj) { - if (!r) { - r = radeon_object_kmap(robj, &fbptr); - } - if (!r) { - robj->rdev->fbdev_info->screen_base = fbptr; - robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr; - } - mutex_unlock(&robj->rdev->fbdev_info->lock); - } } int radeon_object_wait(struct radeon_object *robj) diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index 517c845..bdec583 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -34,7 +34,6 @@ #include <linux/highmem.h> #include <linux/wait.h> #include <linux/vmalloc.h> -#include <linux/version.h> #include <linux/module.h> void ttm_bo_free_old_node(struct ttm_buffer_object *bo) diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c index 27b146c..40b7503 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_vm.c +++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c @@ -32,7 +32,6 @@ #include <ttm/ttm_bo_driver.h> #include <ttm/ttm_placement.h> #include <linux/mm.h> -#include <linux/version.h> #include <linux/rbtree.h> #include <linux/module.h> #include <linux/uaccess.h> diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 0331fa7..75dc8bd 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -28,7 +28,6 @@ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com> */ -#include <linux/version.h> #include <linux/vmalloc.h> #include <linux/sched.h> #include <linux/highmem.h> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index aa87b6a..8206442 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -328,6 +328,7 @@ config I2C_DAVINCI config I2C_DESIGNWARE tristate "Synopsys DesignWare" + depends on HAVE_CLK help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index e447674..b1bc6e2 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -85,10 +85,11 @@ static void dump_iic_regs(const char* header, struct ibm_iic_private* dev) { volatile struct iic_regs __iomem *iic = dev->vaddr; printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header); - printk(KERN_DEBUG " cntl = 0x%02x, mdcntl = 0x%02x\n" - KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n" - KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" - KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n", + printk(KERN_DEBUG + " cntl = 0x%02x, mdcntl = 0x%02x\n" + " sts = 0x%02x, extsts = 0x%02x\n" + " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" + " xtcntlss = 0x%02x, directcntl = 0x%02x\n", in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), in_8(&iic->xtcntlss), in_8(&iic->directcntl)); diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c index bd066bb..09f98ed 100644 --- a/drivers/ide/cs5520.c +++ b/drivers/ide/cs5520.c @@ -135,6 +135,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic ide_pci_setup_ports(dev, d, &hw[0], &hws[0]); hw[0].irq = 14; + hw[1].irq = 15; return ide_host_add(d, hws, 2, NULL); } diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 77f79d2..c509c99 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -92,6 +92,11 @@ int ide_acpi_init(void) return 0; } +bool ide_port_acpi(ide_hwif_t *hwif) +{ + return ide_noacpi == 0 && hwif->acpidata; +} + /** * ide_get_dev_handle - finds acpi_handle and PCI device.function * @dev: device to locate @@ -352,9 +357,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive) unsigned long gtf_address; unsigned long obj_loc; - if (ide_noacpi) - return 0; - DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn); ret = do_drive_get_GTF(drive, >f_length, >f_address, &obj_loc); @@ -389,16 +391,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) struct acpi_buffer output; union acpi_object *out_obj; - if (ide_noacpi) - return; - - DEBPRINT("ENTER:\n"); - - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* Setting up output buffer for _GTM */ output.length = ACPI_ALLOCATE_BUFFER; output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ @@ -479,16 +471,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif) struct ide_acpi_drive_link *master = &hwif->acpidata->master; struct ide_acpi_drive_link *slave = &hwif->acpidata->slave; - if (ide_noacpi) - return; - - DEBPRINT("ENTER:\n"); - - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* Give the GTM buffer + drive Identify data to the channel via the * _STM method: */ /* setup input parameters buffer for _STM */ @@ -527,16 +509,11 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) ide_drive_t *drive; int i; - if (ide_noacpi || ide_noacpi_psx) + if (ide_noacpi_psx) return; DEBPRINT("ENTER:\n"); - if (!hwif->acpidata) { - DEBPRINT("no ACPI data for %s\n", hwif->name); - return; - } - /* channel first and then drives for power on and verse versa for power off */ if (on) acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0); @@ -616,7 +593,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) drive->name, err); } - if (!ide_acpionboot) { + if (ide_noacpi || ide_acpionboot == 0) { DEBPRINT("ACPI methods disabled on boot\n"); return; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 4a19686..6a9a769 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -592,9 +592,19 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) } } else if (!blk_pc_request(rq)) { ide_cd_request_sense_fixup(drive, cmd); - /* complain if we still have data left to transfer */ + uptodate = cmd->nleft ? 0 : 1; - if (uptodate == 0) + + /* + * suck out the remaining bytes from the drive in an + * attempt to complete the data xfer. (see BZ#13399) + */ + if (!(stat & ATA_ERR) && !uptodate && thislen) { + ide_pio_bytes(drive, cmd, write, thislen); + uptodate = cmd->nleft ? 0 : 1; + } + + if (!uptodate) rq->cmd_flags |= REQ_FAILED; } goto out_end; @@ -876,9 +886,12 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, return stat; /* - * Sanity check the given block size + * Sanity check the given block size, in so far as making + * sure the sectors_per_frame we give to the caller won't + * end up being bogus. */ blocklen = be32_to_cpu(capbuf.blocklen); + blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS; switch (blocklen) { case 512: case 1024: @@ -886,10 +899,9 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, case 4096: break; default: - printk(KERN_ERR PFX "%s: weird block size %u\n", + printk_once(KERN_ERR PFX "%s: weird block size %u; " + "setting default block size to 2048\n", drive->name, blocklen); - printk(KERN_ERR PFX "%s: default to 2kb block size\n", - drive->name); blocklen = 2048; break; } diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c index 5bf958e..1099bf7 100644 --- a/drivers/ide/ide-devsets.c +++ b/drivers/ide/ide-devsets.c @@ -183,6 +183,6 @@ ide_startstop_t ide_do_devset(ide_drive_t *drive, struct request *rq) err = setfunc(drive, *(int *)&rq->cmd[1]); if (err) rq->errors = err; - ide_complete_rq(drive, err, ide_rq_bytes(rq)); + ide_complete_rq(drive, err, blk_rq_bytes(rq)); return ide_stopped; } diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 219e6fb..ee58c88 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -361,9 +361,6 @@ static int ide_tune_dma(ide_drive_t *drive) if (__ide_dma_bad_drive(drive)) return 0; - if (ide_id_dma_bug(drive)) - return 0; - if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) return config_drive_for_dma(drive); @@ -394,24 +391,6 @@ static int ide_dma_check(ide_drive_t *drive) return -1; } -int ide_id_dma_bug(ide_drive_t *drive) -{ - u16 *id = drive->id; - - if (id[ATA_ID_FIELD_VALID] & 4) { - if ((id[ATA_ID_UDMA_MODES] >> 8) && - (id[ATA_ID_MWDMA_MODES] >> 8)) - goto err_out; - } else if ((id[ATA_ID_MWDMA_MODES] >> 8) && - (id[ATA_ID_SWDMA_MODES] >> 8)) - goto err_out; - - return 0; -err_out: - printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name); - return 1; -} - int ide_set_dma(ide_drive_t *drive) { int rc; diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c index 2b91419..e9abf2c 100644 --- a/drivers/ide/ide-eh.c +++ b/drivers/ide/ide-eh.c @@ -149,7 +149,7 @@ static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) { if (err <= 0 && rq->errors == 0) rq->errors = -EIO; - ide_complete_rq(drive, err ? err : 0, ide_rq_bytes(rq)); + ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq)); } } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 8b3f204..fefbdfc 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -293,7 +293,7 @@ out_end: drive->failed_pc = NULL; if (blk_fs_request(rq) == 0 && rq->errors == 0) rq->errors = -EIO; - ide_complete_rq(drive, -EIO, ide_rq_bytes(rq)); + ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); return ide_stopped; } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1059f80..db96138 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -112,16 +112,6 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) } } -/* obsolete, blk_rq_bytes() should be used instead */ -unsigned int ide_rq_bytes(struct request *rq) -{ - if (blk_pc_request(rq)) - return blk_rq_bytes(rq); - else - return blk_rq_cur_sectors(rq) << 9; -} -EXPORT_SYMBOL_GPL(ide_rq_bytes); - int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes) { ide_hwif_t *hwif = drive->hwif; @@ -152,14 +142,14 @@ void ide_kill_rq(ide_drive_t *drive, struct request *rq) if ((media == ide_floppy || media == ide_tape) && drv_req) { rq->errors = 0; - ide_complete_rq(drive, 0, blk_rq_bytes(rq)); } else { if (media == ide_tape) rq->errors = IDE_DRV_ERROR_GENERAL; else if (blk_fs_request(rq) == 0 && rq->errors == 0) rq->errors = -EIO; - ide_complete_rq(drive, -EIO, ide_rq_bytes(rq)); } + + ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); } static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index 82f252c..e246d3d 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -64,7 +64,8 @@ static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd, goto out; } - id = kmalloc(size, GFP_KERNEL); + /* ata_id_to_hd_driveid() relies on 'id' to be fully allocated. */ + id = kmalloc(ATA_ID_WORDS * 2, GFP_KERNEL); if (id == NULL) { rc = -ENOMEM; goto out; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index fa04715..2892b24 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -210,6 +210,7 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); */ static const struct drive_list_entry ivb_list[] = { { "QUANTUM FIREBALLlct10 05" , "A03.0900" }, + { "QUANTUM FIREBALLlct20 30" , "APL.0900" }, { "TSSTcorp CDDVDW SH-S202J" , "SB00" }, { "TSSTcorp CDDVDW SH-S202J" , "SB01" }, { "TSSTcorp CDDVDW SH-S202N" , "SB00" }, @@ -329,9 +330,6 @@ int ide_driveid_update(ide_drive_t *drive) kfree(id); - if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive)) - ide_dma_off(drive); - return 1; out_err: if (rc == 2) diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index c14ca14..ad7be266 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -10,9 +10,11 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) struct request_pm_state rqpm; int ret; - /* call ACPI _GTM only once */ - if ((drive->dn & 1) == 0 || pair == NULL) - ide_acpi_get_timing(hwif); + if (ide_port_acpi(hwif)) { + /* call ACPI _GTM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) + ide_acpi_get_timing(hwif); + } memset(&rqpm, 0, sizeof(rqpm)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); @@ -26,9 +28,11 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ret = blk_execute_rq(drive->queue, NULL, rq, 0); blk_put_request(rq); - /* call ACPI _PS3 only after both devices are suspended */ - if (ret == 0 && ((drive->dn & 1) || pair == NULL)) - ide_acpi_set_state(hwif, 0); + if (ret == 0 && ide_port_acpi(hwif)) { + /* call ACPI _PS3 only after both devices are suspended */ + if ((drive->dn & 1) || pair == NULL) + ide_acpi_set_state(hwif, 0); + } return ret; } @@ -42,13 +46,15 @@ int generic_ide_resume(struct device *dev) struct request_pm_state rqpm; int err; - /* call ACPI _PS0 / _STM only once */ - if ((drive->dn & 1) == 0 || pair == NULL) { - ide_acpi_set_state(hwif, 1); - ide_acpi_push_timing(hwif); - } + if (ide_port_acpi(hwif)) { + /* call ACPI _PS0 / _STM only once */ + if ((drive->dn & 1) == 0 || pair == NULL) { + ide_acpi_set_state(hwif, 1); + ide_acpi_push_timing(hwif); + } - ide_acpi_exec_tfs(drive); + ide_acpi_exec_tfs(drive); + } memset(&rqpm, 0, sizeof(rqpm)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 51af4ee..1bb106f 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -818,6 +818,24 @@ static int ide_port_setup_devices(ide_hwif_t *hwif) return j; } +static void ide_host_enable_irqs(struct ide_host *host) +{ + ide_hwif_t *hwif; + int i; + + ide_host_for_each_port(i, hwif, host) { + if (hwif == NULL) + continue; + + /* clear any pending IRQs */ + hwif->tp_ops->read_status(hwif); + + /* unmask IRQs */ + if (hwif->io_ports.ctl_addr) + hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); + } +} + /* * This routine sets up the IRQ for an IDE interface. */ @@ -831,9 +849,6 @@ static int init_irq (ide_hwif_t *hwif) if (irq_handler == NULL) irq_handler = ide_intr; - if (io_ports->ctl_addr) - hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); - if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif)) goto out_up; @@ -1404,6 +1419,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d, ide_port_tune_devices(hwif); } + ide_host_enable_irqs(host); + ide_host_for_each_port(i, hwif, host) { if (hwif == NULL) continue; diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 83b734a..52b25f8 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -880,6 +880,7 @@ static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *ud) } shost->hostdata[0] = (unsigned long)lu; + shost->max_cmd_len = SBP2_MAX_CDB_SIZE; if (!scsi_add_host(shost, &ud->device)) { lu->shost = shost; diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index c5036f1..64a3a66 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -25,6 +25,12 @@ #define SBP2_DEVICE_NAME "sbp2" /* + * There is no transport protocol limit to the CDB length, but we implement + * a fixed length only. 16 bytes is enough for disks larger than 2 TB. + */ +#define SBP2_MAX_CDB_SIZE 16 + +/* * SBP-2 specific definitions */ @@ -51,7 +57,7 @@ struct sbp2_command_orb { u32 data_descriptor_hi; u32 data_descriptor_lo; u32 misc; - u8 cdb[12]; + u8 cdb[SBP2_MAX_CDB_SIZE]; } __attribute__((packed)); #define SBP2_LOGIN_REQUEST 0x0 diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 9d8f796..a6b989a 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -12,6 +12,42 @@ menuconfig INPUT_KEYBOARD if INPUT_KEYBOARD +config KEYBOARD_AAED2000 + tristate "AAED-2000 keyboard" + depends on MACH_AAED2000 + select INPUT_POLLDEV + default y + help + Say Y here to enable the keyboard on the Agilent AAED-2000 + development board. + + To compile this driver as a module, choose M here: the + module will be called aaed2000_kbd. + +config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA + help + Say Y here if you are running Linux on any AMIGA and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called amikbd. + +config ATARI_KBD_CORE + bool + +config KEYBOARD_ATARI + tristate "Atari keyboard" + depends on ATARI + select ATARI_KBD_CORE + help + Say Y here if you are running Linux on any Atari and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called atakbd. + config KEYBOARD_ATKBD tristate "AT keyboard" if EMBEDDED || !X86 default y @@ -68,69 +104,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES right-hand column will be interpreted as the key shown in the left-hand column. -config KEYBOARD_SUNKBD - tristate "Sun Type 4 and Type 5 keyboard" - select SERIO - help - Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, - connected either to the Sun keyboard connector or to an serial - (RS-232) port via a simple adapter. - - To compile this driver as a module, choose M here: the - module will be called sunkbd. - -config KEYBOARD_LKKBD - tristate "DECstation/VAXstation LK201/LK401 keyboard" - select SERIO - help - Say Y here if you want to use a LK201 or LK401 style serial - keyboard. This keyboard is also useable on PCs if you attach - it with the inputattach program. The connector pinout is - described within lkkbd.c. - - To compile this driver as a module, choose M here: the - module will be called lkkbd. - -config KEYBOARD_LOCOMO - tristate "LoCoMo Keyboard Support" - depends on SHARP_LOCOMO && INPUT_KEYBOARD - help - Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA - - To compile this driver as a module, choose M here: the - module will be called locomokbd. - -config KEYBOARD_XTKBD - tristate "XT keyboard" - select SERIO - help - Say Y here if you want to use the old IBM PC/XT keyboard (or - compatible) on your system. This is only possible with a - parallel port keyboard adapter, you cannot connect it to the - keyboard port on a PC that runs Linux. - - To compile this driver as a module, choose M here: the - module will be called xtkbd. - -config KEYBOARD_NEWTON - tristate "Newton keyboard" - select SERIO - help - Say Y here if you have a Newton keyboard on a serial port. - - To compile this driver as a module, choose M here: the - module will be called newtonkbd. - -config KEYBOARD_STOWAWAY - tristate "Stowaway keyboard" - select SERIO +config KEYBOARD_BFIN + tristate "Blackfin BF54x keypad support" + depends on (BF54x && !BF544) help - Say Y here if you have a Stowaway keyboard on a serial port. - Stowaway compatible keyboards like Dicota Input-PDA keyboard - are also supported by this driver. + Say Y here if you want to use the BF54x keypad. To compile this driver as a module, choose M here: the - module will be called stowaway. + module will be called bf54x-keys. config KEYBOARD_CORGI tristate "Corgi keyboard" @@ -143,61 +124,50 @@ config KEYBOARD_CORGI To compile this driver as a module, choose M here: the module will be called corgikbd. -config KEYBOARD_SPITZ - tristate "Spitz keyboard" - depends on PXA_SHARPSL - default y +config KEYBOARD_LKKBD + tristate "DECstation/VAXstation LK201/LK401 keyboard" + select SERIO help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, - SL-C3000 and Sl-C3100 series of PDAs. + Say Y here if you want to use a LK201 or LK401 style serial + keyboard. This keyboard is also useable on PCs if you attach + it with the inputattach program. The connector pinout is + described within lkkbd.c. To compile this driver as a module, choose M here: the - module will be called spitzkbd. + module will be called lkkbd. -config KEYBOARD_TOSA - tristate "Tosa keyboard" - depends on MACH_TOSA - default y +config KEYBOARD_EP93XX + tristate "EP93xx Matrix Keypad support" + depends on ARCH_EP93XX help - Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + Say Y here to enable the matrix keypad on the Cirrus EP93XX. To compile this driver as a module, choose M here: the - module will be called tosakbd. + module will be called ep93xx_keypad. -config KEYBOARD_TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on KEYBOARD_TOSA - default n +config KEYBOARD_GPIO + tristate "GPIO Buttons" + depends on GENERIC_GPIO help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! + This driver implements support for buttons connected + to GPIO pins of various CPUs (and some other chips). -config KEYBOARD_AMIGA - tristate "Amiga keyboard" - depends on AMIGA - help - Say Y here if you are running Linux on any AMIGA and have a keyboard - attached. + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. To compile this driver as a module, choose M here: the - module will be called amikbd. + module will be called gpio_keys. -config ATARI_KBD_CORE - bool - -config KEYBOARD_ATARI - tristate "Atari keyboard" - depends on ATARI - select ATARI_KBD_CORE +config KEYBOARD_MATRIX + tristate "GPIO driven matrix keypad support" + depends on GENERIC_GPIO help - Say Y here if you are running Linux on any Atari and have a keyboard - attached. + Enable support for GPIO driven matrix keypad. To compile this driver as a module, choose M here: the - module will be called atakbd. + module will be called matrix_keypad. config KEYBOARD_HIL_OLD tristate "HP HIL keyboard support (simple driver)" @@ -261,20 +231,39 @@ config KEYBOARD_LM8323 To compile this driver as a module, choose M here: the module will be called lm8323. -config KEYBOARD_OMAP - tristate "TI OMAP keypad support" - depends on (ARCH_OMAP1 || ARCH_OMAP2) +config KEYBOARD_LOCOMO + tristate "LoCoMo Keyboard Support" + depends on SHARP_LOCOMO help - Say Y here if you want to use the OMAP keypad. + Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA To compile this driver as a module, choose M here: the - module will be called omap-keypad. + module will be called locomokbd. + +config KEYBOARD_MAPLE + tristate "Maple bus keyboard" + depends on SH_DREAMCAST && MAPLE + help + Say Y here if you have a Dreamcast console running Linux and have + a keyboard attached to its Maple bus. + + To compile this driver as a module, choose M here: the + module will be called maple_keyb. + +config KEYBOARD_NEWTON + tristate "Newton keyboard" + select SERIO + help + Say Y here if you have a Newton keyboard on a serial port. + + To compile this driver as a module, choose M here: the + module will be called newtonkbd. config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" depends on PXA27x || PXA3xx help - Enable support for PXA27x/PXA3xx keypad controller + Enable support for PXA27x/PXA3xx keypad controller. To compile this driver as a module, choose M here: the module will be called pxa27x_keypad. @@ -288,51 +277,38 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. -config KEYBOARD_AAED2000 - tristate "AAED-2000 keyboard" - depends on MACH_AAED2000 - select INPUT_POLLDEV +config KEYBOARD_SPITZ + tristate "Spitz keyboard" + depends on PXA_SHARPSL default y help - Say Y here to enable the keyboard on the Agilent AAED-2000 - development board. - - To compile this driver as a module, choose M here: the - module will be called aaed2000_kbd. - -config KEYBOARD_GPIO - tristate "GPIO Buttons" - depends on GENERIC_GPIO - help - This driver implements support for buttons connected - to GPIO pins of various CPUs (and some other chips). - - Say Y here if your device has buttons connected - directly to such GPIO pins. Your board-specific - setup logic must also provide a platform device, - with configuration data saying which GPIOs are used. + Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, + SL-C3000 and Sl-C3100 series of PDAs. To compile this driver as a module, choose M here: the - module will be called gpio-keys. + module will be called spitzkbd. -config KEYBOARD_MAPLE - tristate "Maple bus keyboard" - depends on SH_DREAMCAST && MAPLE +config KEYBOARD_STOWAWAY + tristate "Stowaway keyboard" + select SERIO help - Say Y here if you have a Dreamcast console running Linux and have - a keyboard attached to its Maple bus. + Say Y here if you have a Stowaway keyboard on a serial port. + Stowaway compatible keyboards like Dicota Input-PDA keyboard + are also supported by this driver. To compile this driver as a module, choose M here: the - module will be called maple_keyb. + module will be called stowaway. -config KEYBOARD_BFIN - tristate "Blackfin BF54x keypad support" - depends on (BF54x && !BF544) +config KEYBOARD_SUNKBD + tristate "Sun Type 4 and Type 5 keyboard" + select SERIO help - Say Y here if you want to use the BF54x keypad. + Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, + connected either to the Sun keyboard connector or to an serial + (RS-232) port via a simple adapter. To compile this driver as a module, choose M here: the - module will be called bf54x-keys. + module will be called sunkbd. config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" @@ -344,13 +320,45 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. -config KEYBOARD_EP93XX - tristate "EP93xx Matrix Keypad support" - depends on ARCH_EP93XX +config KEYBOARD_OMAP + tristate "TI OMAP keypad support" + depends on (ARCH_OMAP1 || ARCH_OMAP2) help - Say Y here to enable the matrix keypad on the Cirrus EP93XX. + Say Y here if you want to use the OMAP keypad. To compile this driver as a module, choose M here: the - module will be called ep93xx_keypad. + module will be called omap-keypad. + +config KEYBOARD_TOSA + tristate "Tosa keyboard" + depends on MACH_TOSA + default y + help + Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + + To compile this driver as a module, choose M here: the + module will be called tosakbd. + +config KEYBOARD_TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on KEYBOARD_TOSA + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + +config KEYBOARD_XTKBD + tristate "XT keyboard" + select SERIO + help + Say Y here if you want to use the old IBM PC/XT keyboard (or + compatible) on your system. This is only possible with a + parallel port keyboard adapter, you cannot connect it to the + keyboard port on a PC that runs Linux. + + To compile this driver as a module, choose M here: the + module will be called xtkbd. endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 156b647..b5b5eae 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -4,29 +4,30 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o -obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o -obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o -obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o +obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o -obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o -obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o -obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o +obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o -obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o -obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o +obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o +obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o +obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o +obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o +obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o +obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o +obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o -obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o -obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o -obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o -obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o -obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o -obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o -obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o +obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o +obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 2157cd7..efed0c9 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -29,7 +29,8 @@ struct gpio_button_data { struct gpio_keys_button *button; struct input_dev *input; - struct delayed_work work; + struct timer_list timer; + struct work_struct work; }; struct gpio_keys_drvdata { @@ -40,7 +41,7 @@ struct gpio_keys_drvdata { static void gpio_keys_report_event(struct work_struct *work) { struct gpio_button_data *bdata = - container_of(work, struct gpio_button_data, work.work); + container_of(work, struct gpio_button_data, work); struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; @@ -50,17 +51,25 @@ static void gpio_keys_report_event(struct work_struct *work) input_sync(input); } +static void gpio_keys_timer(unsigned long _data) +{ + struct gpio_button_data *data = (struct gpio_button_data *)_data; + + schedule_work(&data->work); +} + static irqreturn_t gpio_keys_isr(int irq, void *dev_id) { struct gpio_button_data *bdata = dev_id; struct gpio_keys_button *button = bdata->button; - unsigned long delay; BUG_ON(irq != gpio_to_irq(button->gpio)); - delay = button->debounce_interval ? - msecs_to_jiffies(button->debounce_interval) : 0; - schedule_delayed_work(&bdata->work, delay); + if (button->debounce_interval) + mod_timer(&bdata->timer, + jiffies + msecs_to_jiffies(button->debounce_interval)); + else + schedule_work(&bdata->work); return IRQ_HANDLED; } @@ -107,7 +116,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) bdata->input = input; bdata->button = button; - INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event); + setup_timer(&bdata->timer, + gpio_keys_timer, (unsigned long)bdata); + INIT_WORK(&bdata->work, gpio_keys_report_event); error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); if (error < 0) { @@ -166,7 +177,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) fail2: while (--i >= 0) { free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); - cancel_delayed_work_sync(&ddata->data[i].work); + if (pdata->buttons[i].debounce_interval) + del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } @@ -190,7 +203,9 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { int irq = gpio_to_irq(pdata->buttons[i].gpio); free_irq(irq, &ddata->data[i]); - cancel_delayed_work_sync(&ddata->data[i].work); + if (pdata->buttons[i].debounce_interval) + del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c new file mode 100644 index 0000000..e9b2e7cb --- /dev/null +++ b/drivers/input/keyboard/matrix_keypad.c @@ -0,0 +1,453 @@ +/* + * GPIO driven matrix keyboard driver + * + * Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com> + * + * Based on corgikbd.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/input/matrix_keypad.h> + +struct matrix_keypad { + const struct matrix_keypad_platform_data *pdata; + struct input_dev *input_dev; + unsigned short *keycodes; + + uint32_t last_key_state[MATRIX_MAX_COLS]; + struct delayed_work work; + bool scan_pending; + bool stopped; + spinlock_t lock; +}; + +/* + * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause + * minmal side effect when scanning other columns, here it is configured to + * be input, and it should work on most platforms. + */ +static void __activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + bool level_on = !pdata->active_low; + + if (on) { + gpio_direction_output(pdata->col_gpios[col], level_on); + } else { + gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); + gpio_direction_input(pdata->col_gpios[col]); + } +} + +static void activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + __activate_col(pdata, col, on); + + if (on && pdata->col_scan_delay_us) + udelay(pdata->col_scan_delay_us); +} + +static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, + bool on) +{ + int col; + + for (col = 0; col < pdata->num_col_gpios; col++) + __activate_col(pdata, col, on); +} + +static bool row_asserted(const struct matrix_keypad_platform_data *pdata, + int row) +{ + return gpio_get_value_cansleep(pdata->row_gpios[row]) ? + !pdata->active_low : pdata->active_low; +} + +static void enable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq(gpio_to_irq(pdata->row_gpios[i])); +} + +static void disable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); +} + +/* + * This gets the keys from keyboard and reports it to input subsystem + */ +static void matrix_keypad_scan(struct work_struct *work) +{ + struct matrix_keypad *keypad = + container_of(work, struct matrix_keypad, work.work); + struct input_dev *input_dev = keypad->input_dev; + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + uint32_t new_state[MATRIX_MAX_COLS]; + int row, col, code; + + /* de-activate all columns for scanning */ + activate_all_cols(pdata, false); + + memset(new_state, 0, sizeof(new_state)); + + /* assert each column and read the row status out */ + for (col = 0; col < pdata->num_col_gpios; col++) { + + activate_col(pdata, col, true); + + for (row = 0; row < pdata->num_row_gpios; row++) + new_state[col] |= + row_asserted(pdata, row) ? (1 << row) : 0; + + activate_col(pdata, col, false); + } + + for (col = 0; col < pdata->num_col_gpios; col++) { + uint32_t bits_changed; + + bits_changed = keypad->last_key_state[col] ^ new_state[col]; + if (bits_changed == 0) + continue; + + for (row = 0; row < pdata->num_row_gpios; row++) { + if ((bits_changed & (1 << row)) == 0) + continue; + + code = (row << 4) + col; + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, + keypad->keycodes[code], + new_state[col] & (1 << row)); + } + } + input_sync(input_dev); + + memcpy(keypad->last_key_state, new_state, sizeof(new_state)); + + activate_all_cols(pdata, true); + + /* Enable IRQs again */ + spin_lock_irq(&keypad->lock); + keypad->scan_pending = false; + enable_row_irqs(keypad); + spin_unlock_irq(&keypad->lock); +} + +static irqreturn_t matrix_keypad_interrupt(int irq, void *id) +{ + struct matrix_keypad *keypad = id; + unsigned long flags; + + spin_lock_irqsave(&keypad->lock, flags); + + /* + * See if another IRQ beaten us to it and scheduled the + * scan already. In that case we should not try to + * disable IRQs again. + */ + if (unlikely(keypad->scan_pending || keypad->stopped)) + goto out; + + disable_row_irqs(keypad); + keypad->scan_pending = true; + schedule_delayed_work(&keypad->work, + msecs_to_jiffies(keypad->pdata->debounce_ms)); + +out: + spin_unlock_irqrestore(&keypad->lock, flags); + return IRQ_HANDLED; +} + +static int matrix_keypad_start(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = false; + mb(); + + /* + * Schedule an immediate key scan to capture current key state; + * columns will be activated and IRQs be enabled after the scan. + */ + schedule_delayed_work(&keypad->work, 0); + + return 0; +} + +static void matrix_keypad_stop(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = true; + mb(); + flush_work(&keypad->work.work); + /* + * matrix_keypad_scan() will leave IRQs enabled; + * we should disable them now. + */ + disable_row_irqs(keypad); +} + +#ifdef CONFIG_PM +static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + matrix_keypad_stop(keypad->input_dev); + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + return 0; +} + +static int matrix_keypad_resume(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + matrix_keypad_start(keypad->input_dev); + + return 0; +} +#else +#define matrix_keypad_suspend NULL +#define matrix_keypad_resume NULL +#endif + +static int __devinit init_matrix_gpio(struct platform_device *pdev, + struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i, err = -EINVAL; + + /* initialized strobe lines as outputs, activated */ + for (i = 0; i < pdata->num_col_gpios; i++) { + err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for COL%d\n", + pdata->col_gpios[i], i); + goto err_free_cols; + } + + gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for ROW%d\n", + pdata->row_gpios[i], i); + goto err_free_rows; + } + + gpio_direction_input(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = request_irq(gpio_to_irq(pdata->row_gpios[i]), + matrix_keypad_interrupt, + IRQF_DISABLED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "matrix-keypad", keypad); + if (err) { + dev_err(&pdev->dev, + "Unable to acquire interrupt for GPIO line %i\n", + pdata->row_gpios[i]); + goto err_free_irqs; + } + } + + /* initialized as disabled - enabled by input->open */ + disable_row_irqs(keypad); + return 0; + +err_free_irqs: + while (--i >= 0) + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + i = pdata->num_row_gpios; +err_free_rows: + while (--i >= 0) + gpio_free(pdata->row_gpios[i]); + i = pdata->num_col_gpios; +err_free_cols: + while (--i >= 0) + gpio_free(pdata->col_gpios[i]); + + return err; +} + +static int __devinit matrix_keypad_probe(struct platform_device *pdev) +{ + const struct matrix_keypad_platform_data *pdata; + const struct matrix_keymap_data *keymap_data; + struct matrix_keypad *keypad; + struct input_dev *input_dev; + unsigned short *keycodes; + int i; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + keymap_data = pdata->keymap_data; + if (!keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + if (!keymap_data->max_keymap_size) { + dev_err(&pdev->dev, "invalid keymap data supplied\n"); + return -EINVAL; + } + + keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); + keycodes = kzalloc(keymap_data->max_keymap_size * + sizeof(keypad->keycodes), + GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !keycodes || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + keypad->input_dev = input_dev; + keypad->pdata = pdata; + keypad->keycodes = keycodes; + keypad->stopped = true; + INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); + spin_lock_init(&keypad->lock); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->open = matrix_keypad_start; + input_dev->close = matrix_keypad_stop; + + input_dev->keycode = keycodes; + input_dev->keycodesize = sizeof(*keycodes); + input_dev->keycodemax = keymap_data->max_keymap_size; + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short code = KEY_VAL(key); + + keycodes[(row << 4) + col] = code; + __set_bit(code, input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + err = init_matrix_gpio(pdev, keypad); + if (err) + goto err_free_mem; + + err = input_register_device(keypad->input_dev); + if (err) + goto err_free_mem; + + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + + return 0; + +err_free_mem: + input_free_device(input_dev); + kfree(keycodes); + kfree(keypad); + return err; +} + +static int __devexit matrix_keypad_remove(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + device_init_wakeup(&pdev->dev, 0); + + for (i = 0; i < pdata->num_row_gpios; i++) { + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + gpio_free(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_col_gpios; i++) + gpio_free(pdata->col_gpios[i]); + + input_unregister_device(keypad->input_dev); + platform_set_drvdata(pdev, NULL); + kfree(keypad->keycodes); + kfree(keypad); + + return 0; +} + +static struct platform_driver matrix_keypad_driver = { + .probe = matrix_keypad_probe, + .remove = __devexit_p(matrix_keypad_remove), + .suspend = matrix_keypad_suspend, + .resume = matrix_keypad_resume, + .driver = { + .name = "matrix-keypad", + .owner = THIS_MODULE, + }, +}; + +static int __init matrix_keypad_init(void) +{ + return platform_driver_register(&matrix_keypad_driver); +} + +static void __exit matrix_keypad_exit(void) +{ + platform_driver_unregister(&matrix_keypad_driver); +} + +module_init(matrix_keypad_init); +module_exit(matrix_keypad_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:matrix-keypad"); diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c index 2adf9cb..d114d3a 100644 --- a/drivers/input/misc/cobalt_btns.c +++ b/drivers/input/misc/cobalt_btns.c @@ -1,7 +1,7 @@ /* * Cobalt button interface driver. * - * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -148,7 +148,7 @@ static int __devexit cobalt_buttons_remove(struct platform_device *pdev) return 0; } -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); MODULE_DESCRIPTION("Cobalt button interface driver"); MODULE_LICENSE("GPL"); /* work with hotplug and coldplug */ diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c index 5e5eb88..7b6ce17 100644 --- a/drivers/input/mouse/gpio_mouse.c +++ b/drivers/input/mouse/gpio_mouse.c @@ -46,7 +46,7 @@ static void gpio_mouse_scan(struct input_polled_dev *dev) input_sync(input); } -static int __init gpio_mouse_probe(struct platform_device *pdev) +static int __devinit gpio_mouse_probe(struct platform_device *pdev) { struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data; struct input_polled_dev *input_poll; @@ -170,10 +170,8 @@ static int __devexit gpio_mouse_remove(struct platform_device *pdev) return 0; } -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:gpio_mouse"); - static struct platform_driver gpio_mouse_device_driver = { + .probe = gpio_mouse_probe, .remove = __devexit_p(gpio_mouse_remove), .driver = { .name = "gpio_mouse", @@ -183,8 +181,7 @@ static struct platform_driver gpio_mouse_device_driver = { static int __init gpio_mouse_init(void) { - return platform_driver_probe(&gpio_mouse_device_driver, - gpio_mouse_probe); + return platform_driver_register(&gpio_mouse_device_driver); } module_init(gpio_mouse_init); @@ -197,3 +194,5 @@ module_exit(gpio_mouse_exit); MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); MODULE_DESCRIPTION("GPIO mouse driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */ + diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index fb8a3cd..924e8ed 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -392,6 +392,34 @@ static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), }, }, + { + .ident = "Acer Aspire One 150", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"), + }, + }, + { + .ident = "Advent 4211", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"), + DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"), + }, + }, + { + .ident = "Medion Akoya Mini E1210", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), + DMI_MATCH(DMI_PRODUCT_NAME, "E1210"), + }, + }, + { + .ident = "Mivvy M310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"), + DMI_MATCH(DMI_PRODUCT_NAME, "N10"), + }, + }, { } }; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index f919bf5..582245c 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -934,10 +934,11 @@ static bool i8042_suspended; static int i8042_suspend(struct platform_device *dev, pm_message_t state) { - if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) { + if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) i8042_controller_reset(); - i8042_suspended = true; - } + + i8042_suspended = state.event == PM_EVENT_SUSPEND || + state.event == PM_EVENT_FREEZE; return 0; } diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index fb17573..d66f494 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -935,10 +935,11 @@ static int serio_suspend(struct device *dev, pm_message_t state) { struct serio *serio = to_serio_port(dev); - if (!serio->suspended && state.event == PM_EVENT_SUSPEND) { + if (!serio->suspended && state.event == PM_EVENT_SUSPEND) serio_cleanup(serio); - serio->suspended = true; - } + + serio->suspended = state.event == PM_EVENT_SUSPEND || + state.event == PM_EVENT_FREEZE; return 0; } diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 38bf863..c896d6a 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -384,6 +384,8 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_STYLUS2, 0); wacom_report_key(wcombo, BTN_TOUCH, 0); wacom_report_abs(wcombo, ABS_WHEEL, 0); + if (wacom->features->type >= INTUOS3S) + wacom_report_abs(wcombo, ABS_Z, 0); } wacom_report_key(wcombo, wacom->tool[idx], 0); wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ @@ -836,6 +838,7 @@ static struct wacom_features wacom_features[] = { { "Wacom DTU710", 8, 34080, 27660, 511, 0, PL }, { "Wacom DTF521", 8, 6282, 4762, 511, 0, PL }, { "Wacom DTF720", 8, 6858, 5506, 511, 0, PL }, + { "Wacom DTF720a", 8, 6858, 5506, 511, 0, PL }, { "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU }, { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, @@ -897,8 +900,9 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c index 6071f58..937dfe4 100644 --- a/drivers/input/touchscreen/w90p910_ts.c +++ b/drivers/input/touchscreen/w90p910_ts.c @@ -326,7 +326,7 @@ static struct platform_driver w90x900ts_driver = { .probe = w90x900ts_probe, .remove = __devexit_p(w90x900ts_remove), .driver = { - .name = "w90x900-ts", + .name = "nuc900-ts", .owner = THIS_MODULE, }, }; @@ -347,4 +347,4 @@ module_exit(w90x900ts_exit); MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); MODULE_DESCRIPTION("w90p910 touch screen driver!"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:w90p910-ts"); +MODULE_ALIAS("platform:nuc900-ts"); diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c index ec51696..2d91049 100644 --- a/drivers/isdn/gigaset/ev-layer.c +++ b/drivers/isdn/gigaset/ev-layer.c @@ -294,32 +294,33 @@ struct reply_t gigaset_tab_cid[] = {RSP_OK, 604,604, -1, 605, 5, {ACT_CMD+AT_MSN}}, {RSP_OK, 605,605, -1, 606, 5, {ACT_CMD+AT_ISO}}, {RSP_NULL, 605,605, -1, 606, 5, {ACT_CMD+AT_ISO}}, - {RSP_OK, 606,606, -1, 607, 5, {0}, "+VLS=17\r"}, /* set "Endgeraetemodus" */ + {RSP_OK, 606,606, -1, 607, 5, {0}, "+VLS=17\r"}, {RSP_OK, 607,607, -1, 608,-1}, - //{RSP_ZSAU, 608,608,ZSAU_PROCEEDING, 608, 0, {ACT_ERROR}},//DELETE {RSP_ZSAU, 608,608,ZSAU_PROCEEDING, 609, 5, {ACT_CMD+AT_DIAL}}, {RSP_OK, 609,609, -1, 650, 0, {ACT_DIALING}}, - {RSP_ZVLS, 608,608, 17, -1,-1, {ACT_DEBUG}}, - {RSP_ZCTP, 609,609, -1, -1,-1, {ACT_DEBUG}}, - {RSP_ZCPN, 609,609, -1, -1,-1, {ACT_DEBUG}}, {RSP_ERROR, 601,609, -1, 0, 0, {ACT_ABORTDIAL}}, {EV_TIMEOUT, 601,609, -1, 0, 0, {ACT_ABORTDIAL}}, - /* dialing */ - {RSP_ZCTP, 650,650, -1, -1,-1, {ACT_DEBUG}}, - {RSP_ZCPN, 650,650, -1, -1,-1, {ACT_DEBUG}}, - {RSP_ZSAU, 650,650,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}}, /* some devices don't send this */ - - /* connection established */ - {RSP_ZSAU, 650,650,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, //FIXME -> DLE1 - {RSP_ZSAU, 750,750,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, //FIXME -> DLE1 - - {EV_BC_OPEN, 800,800, -1, 800,-1, {ACT_NOTIFY_BC_UP}}, //FIXME new constate + timeout + /* optional dialing responses */ + {EV_BC_OPEN, 650,650, -1, 651,-1}, + {RSP_ZVLS, 608,651, 17, -1,-1, {ACT_DEBUG}}, + {RSP_ZCTP, 609,651, -1, -1,-1, {ACT_DEBUG}}, + {RSP_ZCPN, 609,651, -1, -1,-1, {ACT_DEBUG}}, + {RSP_ZSAU, 650,651,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}}, + + /* connect */ + {RSP_ZSAU, 650,650,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, + {RSP_ZSAU, 651,651,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT, + ACT_NOTIFY_BC_UP}}, + {RSP_ZSAU, 750,750,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, + {RSP_ZSAU, 751,751,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT, + ACT_NOTIFY_BC_UP}}, + {EV_BC_OPEN, 800,800, -1, 800,-1, {ACT_NOTIFY_BC_UP}}, /* remote hangup */ - {RSP_ZSAU, 650,650,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEREJECT}}, - {RSP_ZSAU, 750,750,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}}, + {RSP_ZSAU, 650,651,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEREJECT}}, + {RSP_ZSAU, 750,751,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}}, {RSP_ZSAU, 800,800,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}}, /* hangup */ @@ -358,7 +359,8 @@ struct reply_t gigaset_tab_cid[] = {RSP_ZSAU, 700,729,ZSAU_ACTIVE, 0, 0, {ACT_ABORTACCEPT}}, {RSP_ZSAU, 700,729,ZSAU_DISCONNECT_IND, 0, 0, {ACT_ABORTACCEPT}}, - {EV_TIMEOUT, 750,750, -1, 0, 0, {ACT_CONNTIMEOUT}}, + {EV_BC_OPEN, 750,750, -1, 751,-1}, + {EV_TIMEOUT, 750,751, -1, 0, 0, {ACT_CONNTIMEOUT}}, /* B channel closed (general case) */ {EV_BC_CLOSED, -1, -1, -1, -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME @@ -876,12 +878,6 @@ static void bchannel_down(struct bc_state *bcs) static void bchannel_up(struct bc_state *bcs) { - if (!(bcs->chstate & CHS_D_UP)) { - dev_notice(bcs->cs->dev, "%s: D channel not up\n", __func__); - bcs->chstate |= CHS_D_UP; - gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN); - } - if (bcs->chstate & CHS_B_UP) { dev_notice(bcs->cs->dev, "%s: B channel already up\n", __func__); diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c index db3a1e4..bed38fc 100644 --- a/drivers/isdn/gigaset/isocdata.c +++ b/drivers/isdn/gigaset/isocdata.c @@ -174,12 +174,6 @@ int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size) pr_err("invalid size %d\n", size); return -EINVAL; } - src = iwb->read; - if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD || - (read < src && limit >= src))) { - pr_err("isoc write buffer frame reservation violated\n"); - return -EFAULT; - } #endif if (read < write) { diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 9b60b6b..7c8e7122a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -75,6 +75,7 @@ config LEDS_ALIX2 depends on LEDS_CLASS && X86 && EXPERIMENTAL help This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs. + You have to set leds-alix2.force=1 for boards with Award BIOS. config LEDS_H1940 tristate "LED Support for iPAQ H1940 device" @@ -145,15 +146,16 @@ config LEDS_GPIO_OF of_platform devices. For instance, LEDs which are listed in a "dts" file. -config LEDS_LP5521 - tristate "LED Support for the LP5521 LEDs" +config LEDS_LP3944 + tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" depends on LEDS_CLASS && I2C help - If you say 'Y' here you get support for the National Semiconductor - LP5521 LED driver used in n8x0 boards. + This option enables support for LEDs connected to the National + Semiconductor LP3944 Lighting Management Unit (LMU) also known as + Fun Light Chip. - This driver can be built as a module by choosing 'M'. The module - will be called leds-lp5521. + To compile this driver as a module, choose M here: the + module will be called leds-lp3944. config LEDS_CLEVO_MAIL tristate "Mail LED on Clevo notebook" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 2d41c4d..e8cdcf7 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o +obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c index ddbd773..731d4ee 100644 --- a/drivers/leds/leds-alix2.c +++ b/drivers/leds/leds-alix2.c @@ -14,7 +14,7 @@ static int force = 0; module_param(force, bool, 0444); -MODULE_PARM_DESC(force, "Assume system has ALIX.2 style LEDs"); +MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs"); struct alix_led { struct led_classdev cdev; @@ -155,6 +155,11 @@ static int __init alix_led_init(void) goto out; } + /* enable output on GPIO for LED 1,2,3 */ + outl(1 << 6, 0x6104); + outl(1 << 9, 0x6184); + outl(1 << 11, 0x6184); + pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); if (!IS_ERR(pdev)) { ret = platform_driver_probe(&alix_led_driver, alix_led_probe); diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index 4149ecb..779d7f2 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -97,6 +97,10 @@ struct bd2802_led { enum led_ids led_id; enum led_colors color; enum led_bits state; + + /* General attributes of RGB LEDs */ + int wave_pattern; + int rgb_current; }; @@ -254,7 +258,7 @@ static void bd2802_set_on(struct bd2802_led *led, enum led_ids id, bd2802_reset_cancel(led); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); - bd2802_write_byte(led->client, reg, BD2802_CURRENT_032); + bd2802_write_byte(led->client, reg, led->rgb_current); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN); @@ -275,9 +279,9 @@ static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id, reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); - bd2802_write_byte(led->client, reg, BD2802_CURRENT_032); + bd2802_write_byte(led->client, reg, led->rgb_current); reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN); - bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF); + bd2802_write_byte(led->client, reg, led->wave_pattern); bd2802_enable(led, id); bd2802_update_state(led, id, color, BD2802_BLINK); @@ -406,7 +410,7 @@ static void bd2802_enable_adv_conf(struct bd2802_led *led) ret = device_create_file(&led->client->dev, bd2802_addr_attributes[i]); if (ret) { - dev_err(&led->client->dev, "failed to sysfs file %s\n", + dev_err(&led->client->dev, "failed: sysfs file %s\n", bd2802_addr_attributes[i]->attr.name); goto failed_remove_files; } @@ -483,6 +487,52 @@ static struct device_attribute bd2802_adv_conf_attr = { .store = bd2802_store_adv_conf, }; +#define BD2802_CONTROL_ATTR(attr_name, name_str) \ +static ssize_t bd2802_show_##attr_name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\ + ssize_t ret; \ + down_read(&led->rwsem); \ + ret = sprintf(buf, "0x%02x\n", led->attr_name); \ + up_read(&led->rwsem); \ + return ret; \ +} \ +static ssize_t bd2802_store_##attr_name(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\ + unsigned long val; \ + int ret; \ + if (!count) \ + return -EINVAL; \ + ret = strict_strtoul(buf, 16, &val); \ + if (ret) \ + return ret; \ + down_write(&led->rwsem); \ + led->attr_name = val; \ + up_write(&led->rwsem); \ + return count; \ +} \ +static struct device_attribute bd2802_##attr_name##_attr = { \ + .attr = { \ + .name = name_str, \ + .mode = 0644, \ + .owner = THIS_MODULE \ + }, \ + .show = bd2802_show_##attr_name, \ + .store = bd2802_store_##attr_name, \ +}; + +BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern"); +BD2802_CONTROL_ATTR(rgb_current, "rgb_current"); + +static struct device_attribute *bd2802_attributes[] = { + &bd2802_adv_conf_attr, + &bd2802_wave_pattern_attr, + &bd2802_rgb_current_attr, +}; + static void bd2802_led_work(struct work_struct *work) { struct bd2802_led *led = container_of(work, struct bd2802_led, work); @@ -538,7 +588,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led1r.brightness = LED_OFF; led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness; led->cdev_led1r.blink_set = bd2802_set_led1r_blink; - led->cdev_led1r.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led1r); if (ret < 0) { @@ -551,7 +600,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led1g.brightness = LED_OFF; led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness; led->cdev_led1g.blink_set = bd2802_set_led1g_blink; - led->cdev_led1g.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led1g); if (ret < 0) { @@ -564,7 +612,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led1b.brightness = LED_OFF; led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness; led->cdev_led1b.blink_set = bd2802_set_led1b_blink; - led->cdev_led1b.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led1b); if (ret < 0) { @@ -577,7 +624,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led2r.brightness = LED_OFF; led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness; led->cdev_led2r.blink_set = bd2802_set_led2r_blink; - led->cdev_led2r.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led2r); if (ret < 0) { @@ -590,7 +636,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led) led->cdev_led2g.brightness = LED_OFF; led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness; led->cdev_led2g.blink_set = bd2802_set_led2g_blink; - led->cdev_led2g.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&led->client->dev, &led->cdev_led2g); if (ret < 0) { @@ -640,7 +685,7 @@ static int __devinit bd2802_probe(struct i2c_client *client, { struct bd2802_led *led; struct bd2802_led_platform_data *pdata; - int ret; + int ret, i; led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL); if (!led) { @@ -670,13 +715,20 @@ static int __devinit bd2802_probe(struct i2c_client *client, /* To save the power, reset BD2802 after detecting */ gpio_set_value(led->pdata->reset_gpio, 0); + /* Default attributes */ + led->wave_pattern = BD2802_PATTERN_HALF; + led->rgb_current = BD2802_CURRENT_032; + init_rwsem(&led->rwsem); - ret = device_create_file(&client->dev, &bd2802_adv_conf_attr); - if (ret) { - dev_err(&client->dev, "failed to create sysfs file %s\n", - bd2802_adv_conf_attr.attr.name); - goto failed_free; + for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) { + ret = device_create_file(&led->client->dev, + bd2802_attributes[i]); + if (ret) { + dev_err(&led->client->dev, "failed: sysfs file %s\n", + bd2802_attributes[i]->attr.name); + goto failed_unregister_dev_file; + } } ret = bd2802_register_led_classdev(led); @@ -686,7 +738,8 @@ static int __devinit bd2802_probe(struct i2c_client *client, return 0; failed_unregister_dev_file: - device_remove_file(&client->dev, &bd2802_adv_conf_attr); + for (i--; i >= 0; i--) + device_remove_file(&led->client->dev, bd2802_attributes[i]); failed_free: i2c_set_clientdata(client, NULL); kfree(led); @@ -697,12 +750,14 @@ failed_free: static int __exit bd2802_remove(struct i2c_client *client) { struct bd2802_led *led = i2c_get_clientdata(client); + int i; - bd2802_unregister_led_classdev(led); gpio_set_value(led->pdata->reset_gpio, 0); + bd2802_unregister_led_classdev(led); if (led->adf_on) bd2802_disable_adv_conf(led); - device_remove_file(&client->dev, &bd2802_adv_conf_attr); + for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) + device_remove_file(&led->client->dev, bd2802_attributes[i]); i2c_set_clientdata(client, NULL); kfree(led); @@ -723,8 +778,7 @@ static int bd2802_resume(struct i2c_client *client) struct bd2802_led *led = i2c_get_clientdata(client); if (!bd2802_is_all_off(led) || led->adf_on) { - gpio_set_value(led->pdata->reset_gpio, 1); - udelay(100); + bd2802_reset_cancel(led); bd2802_restore_state(led); } @@ -762,4 +816,4 @@ module_exit(bd2802_exit); MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>"); MODULE_DESCRIPTION("BD2802 LED driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c index ff0e8c3..5f1ce81 100644 --- a/drivers/leds/leds-cobalt-raq.c +++ b/drivers/leds/leds-cobalt-raq.c @@ -1,7 +1,7 @@ /* * LEDs driver for the Cobalt Raq series. * - * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index d210905..6b06638 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -76,7 +76,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template, struct gpio_led_data *led_dat, struct device *parent, int (*blink_set)(unsigned, unsigned long *, unsigned long *)) { - int ret; + int ret, state; /* skip leds that aren't available */ if (!gpio_is_valid(template->gpio)) { @@ -99,11 +99,15 @@ static int __devinit create_gpio_led(const struct gpio_led *template, led_dat->cdev.blink_set = gpio_blink_set; } led_dat->cdev.brightness_set = gpio_led_set; - led_dat->cdev.brightness = LED_OFF; + if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) + state = !!gpio_get_value(led_dat->gpio) ^ led_dat->active_low; + else + state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); + led_dat->cdev.brightness = state ? LED_FULL : LED_OFF; if (!template->retain_state_suspended) led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; - ret = gpio_direction_output(led_dat->gpio, led_dat->active_low); + ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state); if (ret < 0) goto err; @@ -129,7 +133,7 @@ static void delete_gpio_led(struct gpio_led_data *led) } #ifdef CONFIG_LEDS_GPIO_PLATFORM -static int gpio_led_probe(struct platform_device *pdev) +static int __devinit gpio_led_probe(struct platform_device *pdev) { struct gpio_led_platform_data *pdata = pdev->dev.platform_data; struct gpio_led_data *leds_data; @@ -223,12 +227,22 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev, memset(&led, 0, sizeof(led)); for_each_child_of_node(np, child) { enum of_gpio_flags flags; + const char *state; led.gpio = of_get_gpio_flags(child, 0, &flags); led.active_low = flags & OF_GPIO_ACTIVE_LOW; led.name = of_get_property(child, "label", NULL) ? : child->name; led.default_trigger = of_get_property(child, "linux,default-trigger", NULL); + state = of_get_property(child, "default-state", NULL); + if (state) { + if (!strcmp(state, "keep")) + led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + else if(!strcmp(state, "on")) + led.default_state = LEDS_GPIO_DEFSTATE_ON; + else + led.default_state = LEDS_GPIO_DEFSTATE_OFF; + } ret = create_gpio_led(&led, &pdata->led_data[pdata->num_leds++], &ofdev->dev, NULL); diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c new file mode 100644 index 0000000..5946208 --- /dev/null +++ b/drivers/leds/leds-lp3944.c @@ -0,0 +1,466 @@ +/* + * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip + * + * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* + * I2C driver for National Semiconductor LP3944 Funlight Chip + * http://www.national.com/pf/LP/LP3944.html + * + * This helper chip can drive up to 8 leds, with two programmable DIM modes; + * it could even be used as a gpio expander but this driver assumes it is used + * as a led controller. + * + * The DIM modes are used to set _blink_ patterns for leds, the pattern is + * specified supplying two parameters: + * - period: from 0s to 1.6s + * - duty cycle: percentage of the period the led is on, from 0 to 100 + * + * LP3944 can be found on Motorola A910 smartphone, where it drives the rgb + * leds, the camera flash light and the displays backlights. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/mutex.h> +#include <linux/workqueue.h> +#include <linux/leds-lp3944.h> + +/* Read Only Registers */ +#define LP3944_REG_INPUT1 0x00 /* LEDs 0-7 InputRegister (Read Only) */ +#define LP3944_REG_REGISTER1 0x01 /* None (Read Only) */ + +#define LP3944_REG_PSC0 0x02 /* Frequency Prescaler 0 (R/W) */ +#define LP3944_REG_PWM0 0x03 /* PWM Register 0 (R/W) */ +#define LP3944_REG_PSC1 0x04 /* Frequency Prescaler 1 (R/W) */ +#define LP3944_REG_PWM1 0x05 /* PWM Register 1 (R/W) */ +#define LP3944_REG_LS0 0x06 /* LEDs 0-3 Selector (R/W) */ +#define LP3944_REG_LS1 0x07 /* LEDs 4-7 Selector (R/W) */ + +/* These registers are not used to control leds in LP3944, they can store + * arbitrary values which the chip will ignore. + */ +#define LP3944_REG_REGISTER8 0x08 +#define LP3944_REG_REGISTER9 0x09 + +#define LP3944_DIM0 0 +#define LP3944_DIM1 1 + +/* period in ms */ +#define LP3944_PERIOD_MIN 0 +#define LP3944_PERIOD_MAX 1600 + +/* duty cycle is a percentage */ +#define LP3944_DUTY_CYCLE_MIN 0 +#define LP3944_DUTY_CYCLE_MAX 100 + +#define ldev_to_led(c) container_of(c, struct lp3944_led_data, ldev) + +/* Saved data */ +struct lp3944_led_data { + u8 id; + enum lp3944_type type; + enum lp3944_status status; + struct led_classdev ldev; + struct i2c_client *client; + struct work_struct work; +}; + +struct lp3944_data { + struct mutex lock; + struct i2c_client *client; + struct lp3944_led_data leds[LP3944_LEDS_MAX]; +}; + +static int lp3944_reg_read(struct i2c_client *client, u8 reg, u8 *value) +{ + int tmp; + + tmp = i2c_smbus_read_byte_data(client, reg); + if (tmp < 0) + return -EINVAL; + + *value = tmp; + + return 0; +} + +static int lp3944_reg_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/** + * Set the period for DIM status + * + * @client: the i2c client + * @dim: either LP3944_DIM0 or LP3944_DIM1 + * @period: period of a blink, that is a on/off cycle, expressed in ms. + */ +static int lp3944_dim_set_period(struct i2c_client *client, u8 dim, u16 period) +{ + u8 psc_reg; + u8 psc_value; + int err; + + if (dim == LP3944_DIM0) + psc_reg = LP3944_REG_PSC0; + else if (dim == LP3944_DIM1) + psc_reg = LP3944_REG_PSC1; + else + return -EINVAL; + + /* Convert period to Prescaler value */ + if (period > LP3944_PERIOD_MAX) + return -EINVAL; + + psc_value = (period * 255) / LP3944_PERIOD_MAX; + + err = lp3944_reg_write(client, psc_reg, psc_value); + + return err; +} + +/** + * Set the duty cycle for DIM status + * + * @client: the i2c client + * @dim: either LP3944_DIM0 or LP3944_DIM1 + * @duty_cycle: percentage of a period during which a led is ON + */ +static int lp3944_dim_set_dutycycle(struct i2c_client *client, u8 dim, + u8 duty_cycle) +{ + u8 pwm_reg; + u8 pwm_value; + int err; + + if (dim == LP3944_DIM0) + pwm_reg = LP3944_REG_PWM0; + else if (dim == LP3944_DIM1) + pwm_reg = LP3944_REG_PWM1; + else + return -EINVAL; + + /* Convert duty cycle to PWM value */ + if (duty_cycle > LP3944_DUTY_CYCLE_MAX) + return -EINVAL; + + pwm_value = (duty_cycle * 255) / LP3944_DUTY_CYCLE_MAX; + + err = lp3944_reg_write(client, pwm_reg, pwm_value); + + return err; +} + +/** + * Set the led status + * + * @led: a lp3944_led_data structure + * @status: one of LP3944_LED_STATUS_OFF + * LP3944_LED_STATUS_ON + * LP3944_LED_STATUS_DIM0 + * LP3944_LED_STATUS_DIM1 + */ +static int lp3944_led_set(struct lp3944_led_data *led, u8 status) +{ + struct lp3944_data *data = i2c_get_clientdata(led->client); + u8 id = led->id; + u8 reg; + u8 val = 0; + int err; + + dev_dbg(&led->client->dev, "%s: %s, status before normalization:%d\n", + __func__, led->ldev.name, status); + + switch (id) { + case LP3944_LED0: + case LP3944_LED1: + case LP3944_LED2: + case LP3944_LED3: + reg = LP3944_REG_LS0; + break; + case LP3944_LED4: + case LP3944_LED5: + case LP3944_LED6: + case LP3944_LED7: + id -= LP3944_LED4; + reg = LP3944_REG_LS1; + break; + default: + return -EINVAL; + } + + if (status > LP3944_LED_STATUS_DIM1) + return -EINVAL; + + /* invert only 0 and 1, leave unchanged the other values, + * remember we are abusing status to set blink patterns + */ + if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2) + status = 1 - status; + + mutex_lock(&data->lock); + lp3944_reg_read(led->client, reg, &val); + + val &= ~(LP3944_LED_STATUS_MASK << (id << 1)); + val |= (status << (id << 1)); + + dev_dbg(&led->client->dev, "%s: %s, reg:%d id:%d status:%d val:%#x\n", + __func__, led->ldev.name, reg, id, status, val); + + /* set led status */ + err = lp3944_reg_write(led->client, reg, val); + mutex_unlock(&data->lock); + + return err; +} + +static int lp3944_led_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct lp3944_led_data *led = ldev_to_led(led_cdev); + u16 period; + u8 duty_cycle; + int err; + + /* units are in ms */ + if (*delay_on + *delay_off > LP3944_PERIOD_MAX) + return -EINVAL; + + if (*delay_on == 0 && *delay_off == 0) { + /* Special case: the leds subsystem requires a default user + * friendly blink pattern for the LED. Let's blink the led + * slowly (1Hz). + */ + *delay_on = 500; + *delay_off = 500; + } + + period = (*delay_on) + (*delay_off); + + /* duty_cycle is the percentage of period during which the led is ON */ + duty_cycle = 100 * (*delay_on) / period; + + /* invert duty cycle for inverted leds, this has the same effect of + * swapping delay_on and delay_off + */ + if (led->type == LP3944_LED_TYPE_LED_INVERTED) + duty_cycle = 100 - duty_cycle; + + /* NOTE: using always the first DIM mode, this means that all leds + * will have the same blinking pattern. + * + * We could find a way later to have two leds blinking in hardware + * with different patterns at the same time, falling back to software + * control for the other ones. + */ + err = lp3944_dim_set_period(led->client, LP3944_DIM0, period); + if (err) + return err; + + err = lp3944_dim_set_dutycycle(led->client, LP3944_DIM0, duty_cycle); + if (err) + return err; + + dev_dbg(&led->client->dev, "%s: OK hardware accelerated blink!\n", + __func__); + + led->status = LP3944_LED_STATUS_DIM0; + schedule_work(&led->work); + + return 0; +} + +static void lp3944_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct lp3944_led_data *led = ldev_to_led(led_cdev); + + dev_dbg(&led->client->dev, "%s: %s, %d\n", + __func__, led_cdev->name, brightness); + + led->status = brightness; + schedule_work(&led->work); +} + +static void lp3944_led_work(struct work_struct *work) +{ + struct lp3944_led_data *led; + + led = container_of(work, struct lp3944_led_data, work); + lp3944_led_set(led, led->status); +} + +static int lp3944_configure(struct i2c_client *client, + struct lp3944_data *data, + struct lp3944_platform_data *pdata) +{ + int i, err = 0; + + for (i = 0; i < pdata->leds_size; i++) { + struct lp3944_led *pled = &pdata->leds[i]; + struct lp3944_led_data *led = &data->leds[i]; + led->client = client; + led->id = i; + + switch (pled->type) { + + case LP3944_LED_TYPE_LED: + case LP3944_LED_TYPE_LED_INVERTED: + led->type = pled->type; + led->status = pled->status; + led->ldev.name = pled->name; + led->ldev.max_brightness = 1; + led->ldev.brightness_set = lp3944_led_set_brightness; + led->ldev.blink_set = lp3944_led_set_blink; + led->ldev.flags = LED_CORE_SUSPENDRESUME; + + INIT_WORK(&led->work, lp3944_led_work); + err = led_classdev_register(&client->dev, &led->ldev); + if (err < 0) { + dev_err(&client->dev, + "couldn't register LED %s\n", + led->ldev.name); + goto exit; + } + + /* to expose the default value to userspace */ + led->ldev.brightness = led->status; + + /* Set the default led status */ + err = lp3944_led_set(led, led->status); + if (err < 0) { + dev_err(&client->dev, + "%s couldn't set STATUS %d\n", + led->ldev.name, led->status); + goto exit; + } + break; + + case LP3944_LED_TYPE_NONE: + default: + break; + + } + } + return 0; + +exit: + if (i > 0) + for (i = i - 1; i >= 0; i--) + switch (pdata->leds[i].type) { + + case LP3944_LED_TYPE_LED: + case LP3944_LED_TYPE_LED_INVERTED: + led_classdev_unregister(&data->leds[i].ldev); + cancel_work_sync(&data->leds[i].work); + break; + + case LP3944_LED_TYPE_NONE: + default: + break; + } + + return err; +} + +static int __devinit lp3944_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp3944_platform_data *lp3944_pdata = client->dev.platform_data; + struct lp3944_data *data; + + if (lp3944_pdata == NULL) { + dev_err(&client->dev, "no platform data\n"); + return -EINVAL; + } + + /* Let's see whether this adapter can support what we need. */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "insufficient functionality!\n"); + return -ENODEV; + } + + data = kzalloc(sizeof(struct lp3944_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + i2c_set_clientdata(client, data); + + mutex_init(&data->lock); + + dev_info(&client->dev, "lp3944 enabled\n"); + + lp3944_configure(client, data, lp3944_pdata); + return 0; +} + +static int __devexit lp3944_remove(struct i2c_client *client) +{ + struct lp3944_platform_data *pdata = client->dev.platform_data; + struct lp3944_data *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < pdata->leds_size; i++) + switch (data->leds[i].type) { + case LP3944_LED_TYPE_LED: + case LP3944_LED_TYPE_LED_INVERTED: + led_classdev_unregister(&data->leds[i].ldev); + cancel_work_sync(&data->leds[i].work); + break; + + case LP3944_LED_TYPE_NONE: + default: + break; + } + + kfree(data); + i2c_set_clientdata(client, NULL); + + return 0; +} + +/* lp3944 i2c driver struct */ +static const struct i2c_device_id lp3944_id[] = { + {"lp3944", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lp3944_id); + +static struct i2c_driver lp3944_driver = { + .driver = { + .name = "lp3944", + }, + .probe = lp3944_probe, + .remove = __devexit_p(lp3944_remove), + .id_table = lp3944_id, +}; + +static int __init lp3944_module_init(void) +{ + return i2c_add_driver(&lp3944_driver); +} + +static void __exit lp3944_module_exit(void) +{ + i2c_del_driver(&lp3944_driver); +} + +module_init(lp3944_module_init); +module_exit(lp3944_module_exit); + +MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>"); +MODULE_DESCRIPTION("LP3944 Fun Light Chip"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index 3937244..dba8921 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -35,7 +35,7 @@ struct pca9532_data { struct pca9532_led leds[16]; struct mutex update_lock; struct input_dev *idev; - struct work_struct work; + struct work_struct work; u8 pwm[2]; u8 psc[2]; }; @@ -87,14 +87,14 @@ static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink, if (b > 0xFF) return -EINVAL; data->pwm[pwm] = b; - data->psc[pwm] = blink; - return 0; + data->psc[pwm] = blink; + return 0; } static int pca9532_setpwm(struct i2c_client *client, int pwm) { - struct pca9532_data *data = i2c_get_clientdata(client); - mutex_lock(&data->update_lock); + struct pca9532_data *data = i2c_get_clientdata(client); + mutex_lock(&data->update_lock); i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm), data->pwm[pwm]); i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm), @@ -132,11 +132,11 @@ static void pca9532_set_brightness(struct led_classdev *led_cdev, led->state = PCA9532_ON; else { led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */ - err = pca9532_calcpwm(led->client, 0, 0, value); + err = pca9532_calcpwm(led->client, 0, 0, value); if (err) return; /* XXX: led api doesn't allow error code? */ } - schedule_work(&led->work); + schedule_work(&led->work); } static int pca9532_set_blink(struct led_classdev *led_cdev, @@ -145,7 +145,7 @@ static int pca9532_set_blink(struct led_classdev *led_cdev, struct pca9532_led *led = ldev_to_led(led_cdev); struct i2c_client *client = led->client; int psc; - int err = 0; + int err = 0; if (*delay_on == 0 && *delay_off == 0) { /* led subsystem ask us for a blink rate */ @@ -157,11 +157,11 @@ static int pca9532_set_blink(struct led_classdev *led_cdev, /* Thecus specific: only use PSC/PWM 0 */ psc = (*delay_on * 152-1)/1000; - err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness); - if (err) - return err; - schedule_work(&led->work); - return 0; + err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness); + if (err) + return err; + schedule_work(&led->work); + return 0; } static int pca9532_event(struct input_dev *dev, unsigned int type, @@ -178,15 +178,15 @@ static int pca9532_event(struct input_dev *dev, unsigned int type, else data->pwm[1] = 0; - schedule_work(&data->work); + schedule_work(&data->work); - return 0; + return 0; } static void pca9532_input_work(struct work_struct *work) { - struct pca9532_data *data; - data = container_of(work, struct pca9532_data, work); + struct pca9532_data *data; + data = container_of(work, struct pca9532_data, work); mutex_lock(&data->update_lock); i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1), data->pwm[1]); @@ -195,11 +195,11 @@ static void pca9532_input_work(struct work_struct *work) static void pca9532_led_work(struct work_struct *work) { - struct pca9532_led *led; - led = container_of(work, struct pca9532_led, work); - if (led->state == PCA9532_PWM0) - pca9532_setpwm(led->client, 0); - pca9532_setled(led); + struct pca9532_led *led; + led = container_of(work, struct pca9532_led, work); + if (led->state == PCA9532_PWM0) + pca9532_setpwm(led->client, 0); + pca9532_setled(led); } static int pca9532_configure(struct i2c_client *client, @@ -232,7 +232,7 @@ static int pca9532_configure(struct i2c_client *client, led->ldev.brightness = LED_OFF; led->ldev.brightness_set = pca9532_set_brightness; led->ldev.blink_set = pca9532_set_blink; - INIT_WORK(&led->work, pca9532_led_work); + INIT_WORK(&led->work, pca9532_led_work); err = led_classdev_register(&client->dev, &led->ldev); if (err < 0) { dev_err(&client->dev, @@ -262,11 +262,11 @@ static int pca9532_configure(struct i2c_client *client, BIT_MASK(SND_TONE); data->idev->event = pca9532_event; input_set_drvdata(data->idev, data); - INIT_WORK(&data->work, pca9532_input_work); + INIT_WORK(&data->work, pca9532_input_work); err = input_register_device(data->idev); if (err) { input_free_device(data->idev); - cancel_work_sync(&data->work); + cancel_work_sync(&data->work); data->idev = NULL; goto exit; } @@ -283,13 +283,13 @@ exit: break; case PCA9532_TYPE_LED: led_classdev_unregister(&data->leds[i].ldev); - cancel_work_sync(&data->leds[i].work); + cancel_work_sync(&data->leds[i].work); break; case PCA9532_TYPE_N2100_BEEP: if (data->idev != NULL) { input_unregister_device(data->idev); input_free_device(data->idev); - cancel_work_sync(&data->work); + cancel_work_sync(&data->work); data->idev = NULL; } break; @@ -340,13 +340,13 @@ static int pca9532_remove(struct i2c_client *client) break; case PCA9532_TYPE_LED: led_classdev_unregister(&data->leds[i].ldev); - cancel_work_sync(&data->leds[i].work); + cancel_work_sync(&data->leds[i].work); break; case PCA9532_TYPE_N2100_BEEP: if (data->idev != NULL) { input_unregister_device(data->idev); input_free_device(data->idev); - cancel_work_sync(&data->work); + cancel_work_sync(&data->work); data->idev = NULL; } break; diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index d4e8979..9c31382 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -82,7 +82,7 @@ struct lg_cpu { struct lg_eventfd { unsigned long addr; - struct file *event; + struct eventfd_ctx *event; }; struct lg_eventfd_map { diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 32e2971..9f9a295 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -50,7 +50,7 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd) /* Now append new entry. */ new->map[new->num].addr = addr; - new->map[new->num].event = eventfd_fget(fd); + new->map[new->num].event = eventfd_ctx_fdget(fd); if (IS_ERR(new->map[new->num].event)) { kfree(new); return PTR_ERR(new->map[new->num].event); @@ -357,7 +357,7 @@ static int close(struct inode *inode, struct file *file) /* Release any eventfds they registered. */ for (i = 0; i < lg->eventfds->num; i++) - fput(lg->eventfds->map[i].event); + eventfd_ctx_put(lg->eventfds->map[i].event); kfree(lg->eventfds); /* If lg->dead doesn't contain an error code it will be NULL or a diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index 6e149f4..a0f6838 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -378,6 +378,17 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, dev->ofdev.dev.bus = &macio_bus_type; dev->ofdev.dev.release = macio_release_dev; +#ifdef CONFIG_PCI + /* Set the DMA ops to the ones from the PCI device, this could be + * fishy if we didn't know that on PowerMac it's always direct ops + * or iommu ops that will work fine + */ + dev->ofdev.dev.archdata.dma_ops = + chip->lbus.pdev->dev.archdata.dma_ops; + dev->ofdev.dev.archdata.dma_data = + chip->lbus.pdev->dev.archdata.dma_data; +#endif /* CONFIG_PCI */ + #ifdef DEBUG printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n", dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj); diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 9933eb8..529e2ba 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -776,7 +776,7 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) * But don't wait if split was due to the io size restriction */ if (unlikely(out_of_pages)) - congestion_wait(WRITE, HZ/100); + congestion_wait(BLK_RW_ASYNC, HZ/100); /* * With async crypto it is unsafe to share the crypto context diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c index c3ae515..3710ff8 100644 --- a/drivers/md/dm-exception-store.c +++ b/drivers/md/dm-exception-store.c @@ -195,7 +195,7 @@ int dm_exception_store_create(struct dm_target *ti, int argc, char **argv, struct dm_exception_store **store) { int r = 0; - struct dm_exception_store_type *type; + struct dm_exception_store_type *type = NULL; struct dm_exception_store *tmp_store; char persistent; @@ -211,12 +211,15 @@ int dm_exception_store_create(struct dm_target *ti, int argc, char **argv, } persistent = toupper(*argv[1]); - if (persistent != 'P' && persistent != 'N') { + if (persistent == 'P') + type = get_type("P"); + else if (persistent == 'N') + type = get_type("N"); + else { ti->error = "Persistent flag is not P or N"; return -EINVAL; } - type = get_type(&persistent); if (!type) { ti->error = "Exception store type not recognised"; r = -EINVAL; diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 4899ebe..2cba557 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -495,7 +495,7 @@ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, return 0; } - if (blk_stack_limits(limits, &q->limits, start) < 0) + if (blk_stack_limits(limits, &q->limits, start << 9) < 0) DMWARN("%s: target device %s is misaligned", dm_device_name(ti->table->md), bdevname(bdev, b)); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 3c6d4ee..9acd54a 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1017,7 +1017,7 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector, clone->bi_flags |= 1 << BIO_CLONED; if (bio_integrity(bio)) { - bio_integrity_clone(clone, bio, GFP_NOIO); + bio_integrity_clone(clone, bio, GFP_NOIO, bs); bio_integrity_trim(clone, bio_sector_offset(bio, idx, offset), len); } @@ -1045,7 +1045,7 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector, clone->bi_flags &= ~(1 << BIO_SEG_VALID); if (bio_integrity(bio)) { - bio_integrity_clone(clone, bio, GFP_NOIO); + bio_integrity_clone(clone, bio, GFP_NOIO, bs); if (idx != bio->bi_idx || clone->bi_size < bio->bi_size) bio_integrity_trim(clone, diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 15c8b7b..5810fa9 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -166,8 +166,8 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) rdev->sectors = sectors * mddev->chunk_sectors; } - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. diff --git a/drivers/md/md.c b/drivers/md/md.c index 09be637..d4351ff 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1756,9 +1756,10 @@ static void print_sb_1(struct mdp_superblock_1 *sb) __u8 *uuid; uuid = sb->set_uuid; - printk(KERN_INFO "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x" - ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n" - KERN_INFO "md: Name: \"%s\" CT:%llu\n", + printk(KERN_INFO + "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x" + ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n" + "md: Name: \"%s\" CT:%llu\n", le32_to_cpu(sb->major_version), le32_to_cpu(sb->feature_map), uuid[0], uuid[1], uuid[2], uuid[3], @@ -1770,12 +1771,13 @@ static void print_sb_1(struct mdp_superblock_1 *sb) & MD_SUPERBLOCK_1_TIME_SEC_MASK); uuid = sb->device_uuid; - printk(KERN_INFO "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu" + printk(KERN_INFO + "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu" " RO:%llu\n" - KERN_INFO "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x" - ":%02x%02x%02x%02x%02x%02x\n" - KERN_INFO "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n" - KERN_INFO "md: (MaxDev:%u) \n", + "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x" + ":%02x%02x%02x%02x%02x%02x\n" + "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n" + "md: (MaxDev:%u) \n", le32_to_cpu(sb->level), (unsigned long long)le64_to_cpu(sb->size), le32_to_cpu(sb->raid_disks), @@ -3573,7 +3575,8 @@ suspend_lo_store(mddev_t *mddev, const char *buf, size_t len) char *e; unsigned long long new = simple_strtoull(buf, &e, 10); - if (mddev->pers->quiesce == NULL) + if (mddev->pers == NULL || + mddev->pers->quiesce == NULL) return -EINVAL; if (buf == e || (*e && *e != '\n')) return -EINVAL; @@ -3601,7 +3604,8 @@ suspend_hi_store(mddev_t *mddev, const char *buf, size_t len) char *e; unsigned long long new = simple_strtoull(buf, &e, 10); - if (mddev->pers->quiesce == NULL) + if (mddev->pers == NULL || + mddev->pers->quiesce == NULL) return -EINVAL; if (buf == e || (*e && *e != '\n')) return -EINVAL; @@ -3844,11 +3848,9 @@ static int md_alloc(dev_t dev, char *name) flush_scheduled_work(); mutex_lock(&disks_mutex); - if (mddev->gendisk) { - mutex_unlock(&disks_mutex); - mddev_put(mddev); - return -EEXIST; - } + error = -EEXIST; + if (mddev->gendisk) + goto abort; if (name) { /* Need to ensure that 'name' is not a duplicate. @@ -3860,17 +3862,15 @@ static int md_alloc(dev_t dev, char *name) if (mddev2->gendisk && strcmp(mddev2->gendisk->disk_name, name) == 0) { spin_unlock(&all_mddevs_lock); - return -EEXIST; + goto abort; } spin_unlock(&all_mddevs_lock); } + error = -ENOMEM; mddev->queue = blk_alloc_queue(GFP_KERNEL); - if (!mddev->queue) { - mutex_unlock(&disks_mutex); - mddev_put(mddev); - return -ENOMEM; - } + if (!mddev->queue) + goto abort; mddev->queue->queuedata = mddev; /* Can be unlocked because the queue is new: no concurrency */ @@ -3880,11 +3880,9 @@ static int md_alloc(dev_t dev, char *name) disk = alloc_disk(1 << shift); if (!disk) { - mutex_unlock(&disks_mutex); blk_cleanup_queue(mddev->queue); mddev->queue = NULL; - mddev_put(mddev); - return -ENOMEM; + goto abort; } disk->major = MAJOR(mddev->unit); disk->first_minor = unit << shift; @@ -3906,16 +3904,22 @@ static int md_alloc(dev_t dev, char *name) mddev->gendisk = disk; error = kobject_init_and_add(&mddev->kobj, &md_ktype, &disk_to_dev(disk)->kobj, "%s", "md"); - mutex_unlock(&disks_mutex); - if (error) + if (error) { + /* This isn't possible, but as kobject_init_and_add is marked + * __must_check, we must do something with the result + */ printk(KERN_WARNING "md: cannot register %s/md - name in use\n", disk->disk_name); - else { + error = 0; + } + abort: + mutex_unlock(&disks_mutex); + if (!error) { kobject_uevent(&mddev->kobj, KOBJ_ADD); mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state"); } mddev_put(mddev); - return 0; + return error; } static struct kobject *md_probe(dev_t dev, int *part, void *data) @@ -6334,10 +6338,16 @@ void md_do_sync(mddev_t *mddev) sysfs_notify(&mddev->kobj, NULL, "sync_completed"); } - if (j >= mddev->resync_max) - wait_event(mddev->recovery_wait, - mddev->resync_max > j - || kthread_should_stop()); + while (j >= mddev->resync_max && !kthread_should_stop()) { + /* As this condition is controlled by user-space, + * we can block indefinitely, so use '_interruptible' + * to avoid triggering warnings. + */ + flush_signals(current); /* just in case */ + wait_event_interruptible(mddev->recovery_wait, + mddev->resync_max > j + || kthread_should_stop()); + } if (kthread_should_stop()) goto interrupted; diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index cbe368f..237fe3f 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -294,7 +294,8 @@ static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) for (path = first; path <= last; path++) if ((p=conf->multipaths+path)->rdev == NULL) { q = rdev->bdev->bd_disk->queue; - blk_queue_stack_limits(mddev->queue, q); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as @@ -463,9 +464,9 @@ static int multipath_run (mddev_t *mddev) disk = conf->multipaths + disk_idx; disk->rdev = rdev; + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); /* as we don't honour merge_bvec_fn, we must never risk * violating it, not that we ever expect a device with * a merge_bvec_fn to be involved in multipath */ diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index ab4a489..335f490 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -170,8 +170,8 @@ static int create_strip_zones(mddev_t *mddev) } dev[j] = rdev1; - blk_queue_stack_limits(mddev->queue, - rdev1->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev1->bdev, + rdev1->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. @@ -250,6 +250,11 @@ static int create_strip_zones(mddev_t *mddev) mddev->chunk_sectors << 9); goto abort; } + + blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9); + blk_queue_io_opt(mddev->queue, + (mddev->chunk_sectors << 9) * mddev->raid_disks); + printk(KERN_INFO "raid0: done.\n"); mddev->private = conf; return 0; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 89939a7..0569efb 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1123,8 +1123,8 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) for (mirror = first; mirror <= last; mirror++) if ( !(p=conf->mirrors+mirror)->rdev) { - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. @@ -1988,9 +1988,8 @@ static int run(mddev_t *mddev) disk = conf->mirrors + disk_idx; disk->rdev = rdev; - - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index ae12cea..7298a5e 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1151,8 +1151,8 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) for ( ; mirror <= last ; mirror++) if ( !(p=conf->mirrors+mirror)->rdev) { - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. @@ -2044,7 +2044,7 @@ raid10_size(mddev_t *mddev, sector_t sectors, int raid_disks) static int run(mddev_t *mddev) { conf_t *conf; - int i, disk_idx; + int i, disk_idx, chunk_size; mirror_info_t *disk; mdk_rdev_t *rdev; int nc, fc, fo; @@ -2130,6 +2130,14 @@ static int run(mddev_t *mddev) spin_lock_init(&conf->device_lock); mddev->queue->queue_lock = &conf->device_lock; + chunk_size = mddev->chunk_sectors << 9; + blk_queue_io_min(mddev->queue, chunk_size); + if (conf->raid_disks % conf->near_copies) + blk_queue_io_opt(mddev->queue, chunk_size * conf->raid_disks); + else + blk_queue_io_opt(mddev->queue, chunk_size * + (conf->raid_disks / conf->near_copies)); + list_for_each_entry(rdev, &mddev->disks, same_set) { disk_idx = rdev->raid_disk; if (disk_idx >= mddev->raid_disks @@ -2138,9 +2146,8 @@ static int run(mddev_t *mddev) disk = conf->mirrors + disk_idx; disk->rdev = rdev; - - blk_queue_stack_limits(mddev->queue, - rdev->bdev->bd_disk->queue); + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); /* as we don't honour merge_bvec_fn, we must never risk * violating it, so limit ->max_sector to one PAGE, as * a one page request is never in violation. diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index f9f991e..3783553 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3699,13 +3699,21 @@ static int make_request(struct request_queue *q, struct bio * bi) goto retry; } } - /* FIXME what if we get a false positive because these - * are being updated. - */ - if (logical_sector >= mddev->suspend_lo && + + if (bio_data_dir(bi) == WRITE && + logical_sector >= mddev->suspend_lo && logical_sector < mddev->suspend_hi) { release_stripe(sh); - schedule(); + /* As the suspend_* range is controlled by + * userspace, we want an interruptible + * wait. + */ + flush_signals(current); + prepare_to_wait(&conf->wait_for_overlap, + &w, TASK_INTERRUPTIBLE); + if (logical_sector >= mddev->suspend_lo && + logical_sector < mddev->suspend_hi) + schedule(); goto retry; } @@ -4452,7 +4460,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) static int run(mddev_t *mddev) { raid5_conf_t *conf; - int working_disks = 0; + int working_disks = 0, chunk_size; mdk_rdev_t *rdev; if (mddev->recovery_cp != MaxSector) @@ -4607,6 +4615,14 @@ static int run(mddev_t *mddev) md_set_array_sectors(mddev, raid5_size(mddev, 0, 0)); blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec); + chunk_size = mddev->chunk_sectors << 9; + blk_queue_io_min(mddev->queue, chunk_size); + blk_queue_io_opt(mddev->queue, chunk_size * + (conf->raid_disks - conf->max_degraded)); + + list_for_each_entry(rdev, &mddev->disks, same_set) + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); return 0; abort: diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index b6da9c38..aa20ce8 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -1096,8 +1096,19 @@ static int xc2028_set_params(struct dvb_frontend *fe, } /* All S-code tables need a 200kHz shift */ - if (priv->ctrl.demod) + if (priv->ctrl.demod) { demod = priv->ctrl.demod + 200; + /* + * The DTV7 S-code table needs a 700 kHz shift. + * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this + * + * DTV7 is only used in Australia. Germany or Italy may also + * use this firmware after initialization, but a tune to a UHF + * channel should then cause DTV78 to be used. + */ + if (type & DTV7) + demod += 500; + } return generic_set_freq(fe, p->frequency, T_DIGITAL_TV, type, 0, demod); diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 68eb449..d8d4214 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -1,5 +1,6 @@ config TTPCI_EEPROM tristate + depends on I2C default n config DVB_AV7110 diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 640421c..46d2163 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -1200,7 +1200,7 @@ static int si470x_fops_release(struct file *file) video_unregister_device(radio->videodev); kfree(radio->buffer); kfree(radio); - goto done; + goto unlock; } /* stop rds reception */ @@ -1213,9 +1213,8 @@ static int si470x_fops_release(struct file *file) retval = si470x_stop(radio); usb_autopm_put_interface(radio->intf); } - +unlock: mutex_unlock(&radio->disconnect_lock); - done: return retval; } diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 061e147..84b6fc1 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -312,6 +312,14 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 7fb3add..9f2e321 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index c92a250..36f2d76 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -198,11 +198,14 @@ static const struct cx18_card_pci_info cx18_pci_mpc718[] = { static const struct cx18_card cx18_card_mpc718 = { .type = CX18_CARD_YUAN_MPC718, - .name = "Yuan MPC718", - .comment = "Analog video capture works; some audio line in may not.\n", + .name = "Yuan MPC718 MiniPCI DVB-T/Analog", + .comment = "Experimenters needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_418_AV, - .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | + CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -211,27 +214,34 @@ static const struct cx18_card cx18_card_mpc718 = { { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, - { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, - { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 0 }, - { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL1, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 }, }, - .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 }, .tuners = { /* XC3028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, + /* FIXME - the FM radio is just a guess and driver doesn't use SIF */ + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, .ddr = { - /* Probably Samsung K4D263238G-VC33 memory */ - .chip_config = 0x003, - .refresh = 0x30c, - .timing1 = 0x23230b73, - .timing2 = 0x08, + /* Hynix HY5DU283222B DDR RAM */ + .chip_config = 0x303, + .refresh = 0x3bd, + .timing1 = 0x36320966, + .timing2 = 0x1f, .tune_lane = 0, .initial_emrs = 2, }, + .gpio_init.initial_value = 0x1, + .gpio_init.direction = 0x3, + /* FIXME - these GPIO's are just guesses */ + .gpio_audio_input = { .mask = 0x3, + .tuner = 0x1, + .linein = 0x3, + .radio = 0x1 }, .xceive_pin = 0, .pci_list = cx18_pci_mpc718, .i2c = &cx18_i2c_std, diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index 6ea3fe6..51a0c33 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -30,6 +30,10 @@ #include "s5h1409.h" #include "mxl5005s.h" #include "zl10353.h" + +#include <linux/firmware.h> +#include "mt352.h" +#include "mt352_priv.h" #include "tuner-xc2028.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -38,6 +42,11 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define CX18_CLOCK_ENABLE2 0xc71024 #define CX18_DMUX_CLK_MASK 0x0080 +/* + * CX18_CARD_HVR_1600_ESMT + * CX18_CARD_HVR_1600_SAMSUNG + */ + static struct mxl5005s_config hauppauge_hvr1600_tuner = { .i2c_address = 0xC6 >> 1, .if_freq = IF_FREQ_5380000HZ, @@ -65,6 +74,9 @@ static struct s5h1409_config hauppauge_hvr1600_config = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +/* + * CX18_CARD_LEADTEK_DVR3100H + */ /* Information/confirmation of proper config values provided by Terry Wu */ static struct zl10353_config leadtek_dvr3100h_demod = { .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ @@ -74,6 +86,121 @@ static struct zl10353_config leadtek_dvr3100h_demod = { .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ }; +/* + * CX18_CARD_YUAN_MPC718 + */ +/* + * Due to + * + * 1. an absence of information on how to prgram the MT352 + * 2. the Linux mt352 module pushing MT352 initialzation off onto us here + * + * We have to use an init sequence that *you* must extract from the Windows + * driver (yuanrap.sys) and which we load as a firmware. + * + * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual + * with chip programming details, then I can remove this annoyance. + */ +static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, + const struct firmware **fw) +{ + struct cx18 *cx = stream->cx; + const char *fn = "dvb-cx18-mpc718-mt352.fw"; + int ret; + + ret = request_firmware(fw, fn, &cx->pci_dev->dev); + if (ret) + CX18_ERR("Unable to open firmware file %s\n", fn); + else { + size_t sz = (*fw)->size; + if (sz < 2 || sz > 64 || (sz % 2) != 0) { + CX18_ERR("Firmware %s has a bad size: %lu bytes\n", + fn, (unsigned long) sz); + ret = -EILSEQ; + release_firmware(*fw); + *fw = NULL; + } + } + + if (ret) { + CX18_ERR("The MPC718 board variant with the MT352 DVB-T" + "demodualtor will not work without it\n"); + CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware " + "mpc718' if you need the firmware\n"); + } + return ret; +} + +static int yuan_mpc718_mt352_init(struct dvb_frontend *fe) +{ + struct cx18_dvb *dvb = container_of(fe->dvb, + struct cx18_dvb, dvb_adapter); + struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb); + const struct firmware *fw = NULL; + int ret; + int i; + u8 buf[3]; + + ret = yuan_mpc718_mt352_reqfw(stream, &fw); + if (ret) + return ret; + + /* Loop through all the register-value pairs in the firmware file */ + for (i = 0; i < fw->size; i += 2) { + buf[0] = fw->data[i]; + /* Intercept a few registers we want to set ourselves */ + switch (buf[0]) { + case TRL_NOMINAL_RATE_0: + /* Set our custom OFDM bandwidth in the case below */ + break; + case TRL_NOMINAL_RATE_1: + /* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */ + /* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */ + /* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */ + buf[1] = 0x72; + buf[2] = 0x49; + mt352_write(fe, buf, 3); + break; + case INPUT_FREQ_0: + /* Set our custom IF in the case below */ + break; + case INPUT_FREQ_1: + /* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */ + buf[1] = 0x31; + buf[2] = 0xc0; + mt352_write(fe, buf, 3); + break; + default: + /* Pass through the register-value pair from the fw */ + buf[1] = fw->data[i+1]; + mt352_write(fe, buf, 2); + break; + } + } + + buf[0] = (u8) TUNER_GO; + buf[1] = 0x01; /* Go */ + mt352_write(fe, buf, 2); + release_firmware(fw); + return 0; +} + +static struct mt352_config yuan_mpc718_mt352_demod = { + .demod_address = 0x1e >> 1, + .adc_clock = 20480, /* 20.480 MHz */ + .if2 = 4560, /* 4.560 MHz */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .demod_init = yuan_mpc718_mt352_init, +}; + +static struct zl10353_config yuan_mpc718_zl10353_demod = { + .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ + .if2 = 45600, /* 4.560 MHz IF from the XC3028 */ + .parallel_ts = 1, /* Not a serial TS */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ +}; + static int dvb_register(struct cx18_stream *stream); /* Kernel DVB framework calls this when the feed needs to start. @@ -113,6 +240,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) break; case CX18_CARD_LEADTEK_DVR3100H: + case CX18_CARD_YUAN_MPC718: default: /* Assumption - Parallel transport - Signalling * undefined or default. @@ -326,6 +454,38 @@ static int dvb_register(struct cx18_stream *stream) fe->ops.tuner_ops.set_config(fe, &ctrl); } break; + case CX18_CARD_YUAN_MPC718: + /* + * TODO + * Apparently, these cards also could instead have a + * DiBcom demod supported by one of the db7000 drivers + */ + dvb->fe = dvb_attach(mt352_attach, + &yuan_mpc718_mt352_demod, + &cx->i2c_adap[1]); + if (dvb->fe == NULL) + dvb->fe = dvb_attach(zl10353_attach, + &yuan_mpc718_zl10353_demod, + &cx->i2c_adap[1]); + if (dvb->fe != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &cx->i2c_adap[1], + .i2c_addr = 0xc2 >> 1, + .ctrl = NULL, + }; + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + .type = XC2028_AUTO, + }; + + fe = dvb_attach(xc2028_attach, dvb->fe, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctrl); + } + break; default: /* No Digital Tv Support */ break; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 48a9751..86ac529 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -463,6 +463,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = { .if_khz = 5380, }; +static int cx23885_dvb_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *param) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1275: + switch (param->u.vsb.modulation) { + case VSB_8: + cx23885_gpio_clear(dev, GPIO_5); + break; + case QAM_64: + case QAM_256: + default: + cx23885_gpio_set(dev, GPIO_5); + break; + } + break; + } + return (port->set_frontend_save) ? + port->set_frontend_save(fe, param) : -ENODEV; +} + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -502,6 +526,12 @@ static int dvb_register(struct cx23885_tsport *port) 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_hvr127x_config); } + + /* FIXME: temporary hack */ + /* define bridge override to set_frontend */ + port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend; + fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend; + break; case CX23885_BOARD_HAUPPAUGE_HVR1255: i2c_bus = &dev->i2c_bus[0]; diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 1a2ac51..214a55e 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -288,6 +288,10 @@ struct cx23885_tsport { /* Allow a single tsport to have multiple frontends */ u32 num_frontends; void *port_priv; + + /* FIXME: temporary hack */ + int (*set_frontend_save) (struct dvb_frontend *, + struct dvb_frontend_parameters *); }; struct cx23885_dev { diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 16a5af3..6524b49 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -8,6 +8,8 @@ config VIDEO_EM28XX select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO + ---help--- This is a video4linux driver for Empia 28xx based TV cards. diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c43fdb9..ebd24a2 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -58,6 +58,8 @@ static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); +#define MT9V011_VERSION 0x8243 + /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */ static unsigned long em28xx_devused; @@ -191,6 +193,13 @@ static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; + +static struct em28xx_reg_seq silvercrest_reg_seq[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0x01, 0xf7, 10}, + { -1, -1, -1, -1}, +}; + /* * Board definitions */ @@ -438,6 +447,18 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_VIDEO, } }, }, + [EM2820_BOARD_SILVERCREST_WEBCAM] = { + .name = "Silvercrest Webcam 1.3mpix", + .tuner_type = TUNER_ABSENT, + .is_27xx = 1, + .decoder = EM28XX_MT9V011, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, + } }, + }, [EM2821_BOARD_SUPERCOMP_USB_2] = { .name = "Supercomp USB 2.0 TV", .valid = EM28XX_BOARD_NOT_VALIDATED, @@ -826,7 +847,7 @@ struct em28xx_board em28xx_boards[] = { .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, - .dvb_gpio = default_analog, + .dvb_gpio = default_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -1639,6 +1660,11 @@ static unsigned short tvp5150_addrs[] = { I2C_CLIENT_END }; +static unsigned short mt9v011_addrs[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, @@ -1678,6 +1704,46 @@ static inline void em28xx_set_model(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ; } +/* HINT method: webcam I2C chips + * + * This method work for webcams with Micron sensors + */ +static int em28xx_hint_sensor(struct em28xx *dev) +{ + int rc; + char *sensor_name; + unsigned char cmd; + __be16 version_be; + u16 version; + + if (dev->model != EM2820_BOARD_UNKNOWN) + return 0; + + dev->i2c_client.addr = 0xba >> 1; + cmd = 0; + i2c_master_send(&dev->i2c_client, &cmd, 1); + rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2); + if (rc != 2) + return -EINVAL; + + version = be16_to_cpu(version_be); + + switch (version) { + case MT9V011_VERSION: + dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + sensor_name = "mt9v011"; + break; + default: + printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version)); + return -EINVAL; + } + + em28xx_errdev("Sensor is %s, assuming that webcam is %s\n", + sensor_name, em28xx_boards[dev->model].name); + + return 0; +} + /* Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ @@ -1706,7 +1772,10 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_info("chip ID is em2750\n"); break; case CHIP_ID_EM2820: - em28xx_info("chip ID is em2820\n"); + if (dev->board.is_27xx) + em28xx_info("chip is em2710\n"); + else + em28xx_info("chip ID is em2820\n"); break; case CHIP_ID_EM2840: em28xx_info("chip ID is em2840\n"); @@ -2158,6 +2227,10 @@ void em28xx_card_setup(struct em28xx *dev) before probing the i2c bus. */ em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; + case EM2820_BOARD_SILVERCREST_WEBCAM: + /* FIXME: need to document the registers bellow */ + em28xx_write_reg(dev, 0x0d, 0x42); + em28xx_write_reg(dev, 0x13, 0x08); } if (dev->board.has_snapshot_button) @@ -2189,6 +2262,10 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvp5150", "tvp5150", tvp5150_addrs); + if (dev->board.decoder == EM28XX_MT9V011) + v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "mt9v011", "mt9v011", mt9v011_addrs); + if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvaudio", "tvaudio", dev->board.tvaudio_addr); @@ -2333,6 +2410,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } + em28xx_hint_sensor(dev); + /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); @@ -2573,6 +2652,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, retval = em28xx_init_dev(&dev, udev, interface, nr); if (retval) { em28xx_devused &= ~(1<<dev->devno); + mutex_unlock(&dev->lock); kfree(dev); goto err; } diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index c8d7ce8..079ab4d 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -648,17 +648,28 @@ int em28xx_capture_start(struct em28xx *dev, int start) int em28xx_set_outfmt(struct em28xx *dev) { int ret; + int vinmode, vinctl, outfmt; + + outfmt = dev->format->reg; + + if (dev->board.is_27xx) { + vinmode = 0x0d; + vinctl = 0x00; + } else { + vinmode = 0x10; + vinctl = 0x11; + } ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT, - dev->format->reg | 0x20, 0x3f); + outfmt | 0x20, 0xff); if (ret < 0) - return ret; + return ret; - ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10); + ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode); if (ret < 0) return ret; - return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11); + return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl); } static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, @@ -695,13 +706,19 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) { u8 mode; /* the em2800 scaler only supports scaling down to 50% */ - if (dev->board.is_em2800) + + if (dev->board.is_27xx) { + /* FIXME: Don't use the scaler yet */ + mode = 0; + } else if (dev->board.is_em2800) { mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00); - else { + } else { u8 buf[2]; + buf[0] = h; buf[1] = h >> 8; em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2); + buf[0] = v; buf[1] = v >> 8; em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2); @@ -720,8 +737,11 @@ int em28xx_resolution_set(struct em28xx *dev) height = norm_maxh(dev) >> 1; em28xx_set_outfmt(dev); + + em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2); em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2); + return em28xx_scaler_set(dev, dev->hscale, dev->vscale); } diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index e7b47c8..3da97c3 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -243,6 +243,14 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, + .parallel_ts = 1, + .if2 = 45600, +}; + #ifdef EM28XX_DRX397XD_SUPPORT /* [TODO] djh - not sure yet what the device config needs to contain */ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { @@ -433,7 +441,6 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: - case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_KWORLD_DVB_310U: case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, @@ -444,6 +451,25 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_TERRATEC_HYBRID_XS: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_terratec_xs_zl10353_xc3028, + &dev->i2c_adap); + if (dvb->frontend == NULL) { + /* This board could have either a zl10353 or a mt352. + If the chip id isn't for zl10353, try mt352 */ + + /* FIXME: make support for mt352 work */ + printk(KERN_ERR "version of this board with mt352 not " + "currently supported\n"); + result = -EINVAL; + goto out_free; + } + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2883_BOARD_KWORLD_HYBRID_330U: case EM2882_BOARD_EVGA_INDTUBE: dvb->frontend = dvb_attach(s5h1409_attach, diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 2c86fcf..27e33a2 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -483,7 +483,7 @@ static char *i2c_devs[128] = { [0xa0 >> 1] = "eeprom", [0xb0 >> 1] = "tda9874", [0xb8 >> 1] = "tvp5150a", - [0xba >> 1] = "tvp5150a", + [0xba >> 1] = "webcam sensor or tvp5150a", [0xc0 >> 1] = "tuner (analog)", [0xc2 >> 1] = "tuner (analog)", [0xc4 >> 1] = "tuner (analog)", diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 8fe1bee..14316c9 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -90,10 +90,35 @@ MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); /* supported video standards */ static struct em28xx_fmt format[] = { { - .name = "16bpp YUY2, 4:2:2, packed", + .name = "16 bpp YUY2, 4:2:2, packed", .fourcc = V4L2_PIX_FMT_YUYV, .depth = 16, .reg = EM28XX_OUTFMT_YUV422_Y0UY1V, + }, { + .name = "16 bpp RGB 565, LE", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .reg = EM28XX_OUTFMT_RGB_16_656, + }, { + .name = "8 bpp Bayer BGBG..GRGR", + .fourcc = V4L2_PIX_FMT_SBGGR8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_BGBG, + }, { + .name = "8 bpp Bayer GRGR..BGBG", + .fourcc = V4L2_PIX_FMT_SGRBG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GRGR, + }, { + .name = "8 bpp Bayer GBGB..RGRG", + .fourcc = V4L2_PIX_FMT_SGBRG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GBGB, + }, { + .name = "12 bpp YUV411", + .fourcc = V4L2_PIX_FMT_YUV411P, + .depth = 12, + .reg = EM28XX_OUTFMT_YUV411, }, }; @@ -701,7 +726,11 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; } - if (dev->board.is_em2800) { + if (dev->board.is_27xx) { + /* FIXME: This is the only supported fmt */ + width = 640; + height = 480; + } else if (dev->board.is_em2800) { /* the em2800 can only scale down to 50% */ height = height > (3 * maxh / 4) ? maxh : maxh / 2; width = width > (3 * maxw / 4) ? maxw : maxw / 2; @@ -733,13 +762,40 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } +static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc, + unsigned width, unsigned height) +{ + struct em28xx_fmt *fmt; + + /* FIXME: This is the only supported fmt */ + if (dev->board.is_27xx) { + width = 640; + height = 480; + } + + fmt = format_by_fourcc(fourcc); + if (!fmt) + return -EINVAL; + + dev->format = fmt; + dev->width = width; + dev->height = height; + + /* set new image size */ + get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); + + em28xx_set_alternate(dev); + em28xx_resolution_set(dev); + + return 0; +} + static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; int rc; - struct em28xx_fmt *fmt; rc = check_dev(dev); if (rc < 0) @@ -749,12 +805,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, vidioc_try_fmt_vid_cap(file, priv, f); - fmt = format_by_fourcc(f->fmt.pix.pixelformat); - if (!fmt) { - rc = -EINVAL; - goto out; - } - if (videobuf_queue_is_busy(&fh->vb_vidq)) { em28xx_errdev("%s queue busy\n", __func__); rc = -EBUSY; @@ -767,16 +817,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, goto out; } - /* set new image size */ - dev->width = f->fmt.pix.width; - dev->height = f->fmt.pix.height; - dev->format = fmt; - get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); - - em28xx_set_alternate(dev); - em28xx_resolution_set(dev); - - rc = 0; + rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat, + f->fmt.pix.width, f->fmt.pix.height); out: mutex_unlock(&dev->lock); @@ -1616,11 +1658,6 @@ static int em28xx_v4l2_open(struct file *filp) filp->private_data = fh; if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->hscale = 0; - dev->vscale = 0; - em28xx_set_mode(dev, EM28XX_ANALOG_MODE); em28xx_set_alternate(dev); em28xx_resolution_set(dev); @@ -1962,15 +1999,14 @@ int em28xx_register_analog_devices(struct em28xx *dev) /* set default norm */ dev->norm = em28xx_video_template.current_norm; - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->hscale = 0; - dev->vscale = 0; dev->ctl_input = 0; /* Analog specific initialization */ dev->format = &format[0]; + em28xx_set_video_format(dev, format[0].fourcc, + norm_maxw(dev), norm_maxh(dev)); + video_mux(dev, dev->ctl_input); /* Audio defaults */ diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 813ce45..d90fef4 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -107,6 +107,7 @@ #define EM2860_BOARD_TERRATEC_AV350 68 #define EM2882_BOARD_KWORLD_ATSC_315U 69 #define EM2882_BOARD_EVGA_INDTUBE 70 +#define EM2820_BOARD_SILVERCREST_WEBCAM 71 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -360,6 +361,7 @@ enum em28xx_decoder { EM28XX_NODECODER, EM28XX_TVP5150, EM28XX_SAA711X, + EM28XX_MT9V011, }; enum em28xx_adecoder { @@ -388,6 +390,7 @@ struct em28xx_board { unsigned int max_range_640_480:1; unsigned int has_dvb:1; unsigned int has_snapshot_button:1; + unsigned int is_27xx:1; unsigned int valid:1; unsigned char xclk, i2c_speed; diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h index 9df7137..992ce53 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.h +++ b/drivers/media/video/gspca/stv06xx/stv06xx.h @@ -36,10 +36,6 @@ #define STV_ISOC_ENDPOINT_ADDR 0x81 -#ifndef V4L2_PIX_FMT_SGRBG8 -#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') -#endif - #define STV_REG23 0x0423 /* Control registers of the STV0600 ASIC */ diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c new file mode 100644 index 0000000..1fe8fc9 --- /dev/null +++ b/drivers/media/video/mt9v011.c @@ -0,0 +1,431 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <media/v4l2-device.h> +#include "mt9v011.h" +#include <media/v4l2-i2c-drv.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_LICENSE("GPL"); + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +/* supported controls */ +static struct v4l2_queryctrl mt9v011_qctrl[] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = (1 << 10) - 1, + .step = 1, + .default_value = 0x0020, + .flags = 0, + }, { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, +}; + +struct mt9v011 { + struct v4l2_subdev sd; + unsigned width, height; + + u16 global_gain, red_bal, blue_bal; +}; + +static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v011, sd); +} + +static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + __be16 buffer; + int rc, val; + + rc = i2c_master_send(c, &addr, 1); + if (rc != 1) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 1)\n", rc); + + msleep(10); + + rc = i2c_master_recv(c, (char *)&buffer, 2); + if (rc != 2) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 2)\n", rc); + + val = be16_to_cpu(buffer); + + v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val); + + return val; +} + +static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, + u16 value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[3]; + int rc; + + buffer[0] = addr; + buffer[1] = value >> 8; + buffer[2] = value & 0xff; + + v4l2_dbg(2, debug, sd, + "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); + rc = i2c_master_send(c, buffer, 3); + if (rc != 3) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 3)\n", rc); +} + + +struct i2c_reg_value { + unsigned char reg; + u16 value; +}; + +/* + * Values used at the original driver + * Some values are marked as Reserved at the datasheet + */ +static const struct i2c_reg_value mt9v011_init_default[] = { + { R0D_MT9V011_RESET, 0x0001 }, + { R0D_MT9V011_RESET, 0x0000 }, + + { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, + { R09_MT9V011_SHUTTER_WIDTH, 0x1fc }, + + { R0A_MT9V011_CLK_SPEED, 0x0000 }, + { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, + { R20_MT9V011_READ_MODE, 0x1000 }, + + { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */ +}; + +static void set_balance(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + u16 green1_gain, green2_gain, blue_gain, red_gain; + + green1_gain = core->global_gain; + green2_gain = core->global_gain; + + blue_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + red_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain); + mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain); + mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); + mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); +} + +static void set_res(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned vstart, hstart; + + /* + * The mt9v011 doesn't have scaling. So, in order to select the desired + * resolution, we're cropping at the middle of the sensor. + * hblank and vblank should be adjusted, in order to warrant that + * we'll preserve the line timings for 30 fps, no matter what resolution + * is selected. + * NOTE: datasheet says that width (and height) should be filled with + * width-1. However, this doesn't work, since one pixel per line will + * be missing. + */ + + hstart = 14 + (640 - core->width) / 2; + mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); + mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); + mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); + + vstart = 8 + (640 - core->height) / 2; + mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); + mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); + mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); +}; + +static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) + mt9v011_write(sd, mt9v011_init_default[i].reg, + mt9v011_init_default[i].value); + + set_balance(sd); + set_res(sd); + + return 0; +}; + +static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + + v4l2_dbg(1, debug, sd, "g_ctrl called\n"); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + ctrl->value = core->global_gain; + return 0; + case V4L2_CID_RED_BALANCE: + ctrl->value = core->red_bal; + return 0; + case V4L2_CID_BLUE_BALANCE: + ctrl->value = core->blue_bal; + return 0; + } + return -EINVAL; +} + +static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + u8 i, n; + n = ARRAY_SIZE(mt9v011_qctrl); + + for (i = 0; i < n; i++) { + if (ctrl->id != mt9v011_qctrl[i].id) + continue; + if (ctrl->value < mt9v011_qctrl[i].minimum || + ctrl->value > mt9v011_qctrl[i].maximum) + return -ERANGE; + v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n", + ctrl->id, ctrl->value); + break; + } + + switch (ctrl->id) { + case V4L2_CID_GAIN: + core->global_gain = ctrl->value; + break; + case V4L2_CID_RED_BALANCE: + core->red_bal = ctrl->value; + break; + case V4L2_CID_BLUE_BALANCE: + core->blue_bal = ctrl->value; + break; + default: + return -EINVAL; + } + + set_balance(sd); + + return 0; +} + +static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt) +{ + if (fmt->index > 0) + return -EINVAL; + + fmt->flags = 0; + strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG"); + fmt->pixelformat = V4L2_PIX_FMT_SGRBG8; + + return 0; +} + +static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8) + return -EINVAL; + + v4l_bound_align_image(&pix->width, 48, 639, 1, + &pix->height, 32, 480, 1, 0); + + return 0; +} + +static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + struct mt9v011 *core = to_mt9v011(sd); + int rc; + + rc = mt9v011_try_fmt(sd, fmt); + if (rc < 0) + return -EINVAL; + + core->width = pix->width; + core->height = pix->height; + + set_res(sd); + + return 0; +} + + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v011_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + reg->val = mt9v011_read(sd, reg->reg & 0xff); + reg->size = 2; + + return 0; +} + +static int mt9v011_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff); + + return 0; +} +#endif + +static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011, + MT9V011_VERSION); +} + +static const struct v4l2_subdev_core_ops mt9v011_core_ops = { + .g_ctrl = mt9v011_g_ctrl, + .s_ctrl = mt9v011_s_ctrl, + .reset = mt9v011_reset, + .g_chip_ident = mt9v011_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9v011_g_register, + .s_register = mt9v011_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9v011_video_ops = { + .enum_fmt = mt9v011_enum_fmt, + .try_fmt = mt9v011_try_fmt, + .s_fmt = mt9v011_s_fmt, +}; + +static const struct v4l2_subdev_ops mt9v011_ops = { + .core = &mt9v011_core_ops, + .video = &mt9v011_video_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int mt9v011_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + u16 version; + struct mt9v011 *core; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL); + if (!core) + return -ENOMEM; + + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); + + /* Check if the sensor is really a MT9V011 */ + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + if (version != MT9V011_VERSION) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n", + version); + kfree(core); + return -EINVAL; + } + + core->global_gain = 0x0024; + core->width = 640; + core->height = 480; + + v4l_info(c, "chip found @ 0x%02x (%s)\n", + c->addr << 1, c->adapter->name); + + return 0; +} + +static int mt9v011_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + + v4l2_dbg(1, debug, sd, + "mt9v011.c: removing mt9v011 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + kfree(to_mt9v011(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id mt9v011_id[] = { + { "mt9v011", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v011_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "mt9v011", + .probe = mt9v011_probe, + .remove = mt9v011_remove, + .id_table = mt9v011_id, +}; diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h new file mode 100644 index 0000000..9e443ee --- /dev/null +++ b/drivers/media/video/mt9v011.h @@ -0,0 +1,35 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#ifndef MT9V011_H_ +#define MT9V011_H_ + +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8243 + +#endif diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 16f595d..9f5ae81 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -237,11 +237,11 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd) return -ENOMEM; icd->num_user_formats = fmts; - fmts = 0; dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts); /* Second pass - actually fill data formats */ + fmts = 0; for (i = 0; i < icd->num_formats; i++) if (!ici->ops->get_formats) { icd->user_formats[i].host_fmt = icd->formats + i; @@ -877,8 +877,11 @@ static int soc_camera_probe(struct device *dev) (unsigned short)~0; ret = soc_camera_init_user_formats(icd); - if (ret < 0) + if (ret < 0) { + if (icd->ops->remove) + icd->ops->remove(icd); goto eiufmt; + } icd->height = DEFAULT_HEIGHT; icd->width = DEFAULT_WIDTH; @@ -902,8 +905,10 @@ static int soc_camera_remove(struct device *dev) { struct soc_camera_device *icd = to_soc_camera_dev(dev); + mutex_lock(&icd->video_lock); if (icd->ops->remove) icd->ops->remove(icd); + mutex_unlock(&icd->video_lock); soc_camera_free_user_formats(icd); @@ -1145,6 +1150,7 @@ evidallocd: } EXPORT_SYMBOL(soc_camera_video_start); +/* Called from client .remove() methods with .video_lock held */ void soc_camera_video_stop(struct soc_camera_device *icd) { struct video_device *vdev = icd->vdev; @@ -1154,10 +1160,8 @@ void soc_camera_video_stop(struct soc_camera_device *icd) if (!icd->dev.parent || !vdev) return; - mutex_lock(&icd->video_lock); video_unregister_device(vdev); icd->vdev = NULL; - mutex_unlock(&icd->video_lock); } EXPORT_SYMBOL(soc_camera_video_stop); diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index cd72668..7705fc6 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -343,6 +343,53 @@ static struct bar_std bars[] = { #define TO_U(r, g, b) \ (((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128) +/* precalculate color bar values to speed up rendering */ +static void precalculate_bars(struct vivi_fh *fh) +{ + struct vivi_dev *dev = fh->dev; + unsigned char r, g, b; + int k, is_yuv; + + fh->input = dev->input; + + for (k = 0; k < 8; k++) { + r = bars[fh->input].bar[k][0]; + g = bars[fh->input].bar[k][1]; + b = bars[fh->input].bar[k][2]; + is_yuv = 0; + + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + is_yuv = 1; + break; + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_RGB565X: + r >>= 3; + g >>= 2; + b >>= 3; + break; + case V4L2_PIX_FMT_RGB555: + case V4L2_PIX_FMT_RGB555X: + r >>= 3; + g >>= 3; + b >>= 3; + break; + } + + if (is_yuv) { + fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ + fh->bars[k][1] = TO_U(r, g, b); /* Cb */ + fh->bars[k][2] = TO_V(r, g, b); /* Cr */ + } else { + fh->bars[k][0] = r; + fh->bars[k][1] = g; + fh->bars[k][2] = b; + } + } + +} + #define TSTAMP_MIN_Y 24 #define TSTAMP_MAX_Y (TSTAMP_MIN_Y + 15) #define TSTAMP_INPUT_X 10 @@ -755,6 +802,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, buf->vb.height = fh->height; buf->vb.field = field; + precalculate_bars(fh); + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { rc = videobuf_iolock(vq, &buf->vb, NULL); if (rc < 0) @@ -893,53 +942,6 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } -/* precalculate color bar values to speed up rendering */ -static void precalculate_bars(struct vivi_fh *fh) -{ - struct vivi_dev *dev = fh->dev; - unsigned char r, g, b; - int k, is_yuv; - - fh->input = dev->input; - - for (k = 0; k < 8; k++) { - r = bars[fh->input].bar[k][0]; - g = bars[fh->input].bar[k][1]; - b = bars[fh->input].bar[k][2]; - is_yuv = 0; - - switch (fh->fmt->fourcc) { - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: - is_yuv = 1; - break; - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_RGB565X: - r >>= 3; - g >>= 2; - b >>= 3; - break; - case V4L2_PIX_FMT_RGB555: - case V4L2_PIX_FMT_RGB555X: - r >>= 3; - g >>= 3; - b >>= 3; - break; - } - - if (is_yuv) { - fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ - fh->bars[k][1] = TO_U(r, g, b); /* Cb */ - fh->bars[k][2] = TO_V(r, g, b); /* Cr */ - } else { - fh->bars[k][0] = r; - fh->bars[k][1] = g; - fh->bars[k][2] = b; - } - } - -} - /*FIXME: This seems to be generic enough to be at videodev2 */ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) @@ -965,8 +967,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; - precalculate_bars(fh); - ret = 0; out: mutex_unlock(&q->vb_lock); @@ -1357,6 +1357,7 @@ static int __init vivi_create_instance(int inst) goto unreg_dev; *vfd = vivi_template; + vfd->debug = debug; ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); if (ret < 0) diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c index 7ac12cb..5b6e58a 100644 --- a/drivers/mfd/dm355evm_msp.c +++ b/drivers/mfd/dm355evm_msp.c @@ -32,8 +32,7 @@ * This driver was tested with firmware revision A4. */ -#if defined(CONFIG_KEYBOARD_DM355EVM) \ - || defined(CONFIG_KEYBOARD_DM355EVM_MODULE) +#if defined(CONFIG_INPUT_DM355EVM) || defined(CONFIG_INPUT_DM355EVM_MODULE) #define msp_has_keyboard() true #else #define msp_has_keyboard() false diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index 671a7ef..c1de4af 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -238,8 +238,10 @@ static irqreturn_t pcap_adc_irq(int irq, void *_pcap) mutex_lock(&pcap->adc_mutex); req = pcap->adc_queue[pcap->adc_head]; - if (WARN(!req, KERN_WARNING "adc irq without pending request\n")) + if (WARN(!req, KERN_WARNING "adc irq without pending request\n")) { + mutex_unlock(&pcap->adc_mutex); return IRQ_HANDLED; + } /* read requested channels results */ ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp); diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 4c7b796..0cc5eef 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -367,7 +367,8 @@ int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to) break; default: - return -1; + gate = -1; + goto already; } writel(mode, sm->regs + SM501_POWER_MODE_CONTROL); diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 68ab39d..df1f86b 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -233,6 +233,19 @@ config ISL29003 This driver can also be built as a module. If so, the module will be called isl29003. +config EP93XX_PWM + tristate "EP93xx PWM support" + depends on ARCH_EP93XX + help + This option enables device driver support for the PWM channels + on the Cirrus EP93xx processors. The EP9307 chip only has one + PWM channel all the others have two, the second channel is an + alternate function of the EGPIO14 pin. A sysfs interface is + provided to control the PWM channels. + + To compile this driver as a module, choose M here: the module will + be called ep93xx_pwm. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 36f733c..f982d2e 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o obj-$(CONFIG_ISL29003) += isl29003.o +obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o obj-$(CONFIG_C2PORT) += c2port/ obj-y += eeprom/ obj-y += cb710/ diff --git a/drivers/misc/ep93xx_pwm.c b/drivers/misc/ep93xx_pwm.c new file mode 100644 index 0000000..ba46941 --- /dev/null +++ b/drivers/misc/ep93xx_pwm.c @@ -0,0 +1,384 @@ +/* + * Simple PWM driver for EP93XX + * + * (c) Copyright 2009 Matthieu Crapet <mcrapet@gmail.com> + * (c) Copyright 2009 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * EP9307 has only one channel: + * - PWMOUT + * + * EP9301/02/12/15 have two channels: + * - PWMOUT + * - PWMOUT1 (alternate function for EGPIO14) + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/platform.h> + +#define EP93XX_PWMx_TERM_COUNT 0x00 +#define EP93XX_PWMx_DUTY_CYCLE 0x04 +#define EP93XX_PWMx_ENABLE 0x08 +#define EP93XX_PWMx_INVERT 0x0C + +#define EP93XX_PWM_MAX_COUNT 0xFFFF + +struct ep93xx_pwm { + void __iomem *mmio_base; + struct clk *clk; + u32 duty_percent; +}; + +static inline void ep93xx_pwm_writel(struct ep93xx_pwm *pwm, + unsigned int val, unsigned int off) +{ + __raw_writel(val, pwm->mmio_base + off); +} + +static inline unsigned int ep93xx_pwm_readl(struct ep93xx_pwm *pwm, + unsigned int off) +{ + return __raw_readl(pwm->mmio_base + off); +} + +static inline void ep93xx_pwm_write_tc(struct ep93xx_pwm *pwm, u16 value) +{ + ep93xx_pwm_writel(pwm, value, EP93XX_PWMx_TERM_COUNT); +} + +static inline u16 ep93xx_pwm_read_tc(struct ep93xx_pwm *pwm) +{ + return ep93xx_pwm_readl(pwm, EP93XX_PWMx_TERM_COUNT); +} + +static inline void ep93xx_pwm_write_dc(struct ep93xx_pwm *pwm, u16 value) +{ + ep93xx_pwm_writel(pwm, value, EP93XX_PWMx_DUTY_CYCLE); +} + +static inline void ep93xx_pwm_enable(struct ep93xx_pwm *pwm) +{ + ep93xx_pwm_writel(pwm, 0x1, EP93XX_PWMx_ENABLE); +} + +static inline void ep93xx_pwm_disable(struct ep93xx_pwm *pwm) +{ + ep93xx_pwm_writel(pwm, 0x0, EP93XX_PWMx_ENABLE); +} + +static inline int ep93xx_pwm_is_enabled(struct ep93xx_pwm *pwm) +{ + return ep93xx_pwm_readl(pwm, EP93XX_PWMx_ENABLE) & 0x1; +} + +static inline void ep93xx_pwm_invert(struct ep93xx_pwm *pwm) +{ + ep93xx_pwm_writel(pwm, 0x1, EP93XX_PWMx_INVERT); +} + +static inline void ep93xx_pwm_normal(struct ep93xx_pwm *pwm) +{ + ep93xx_pwm_writel(pwm, 0x0, EP93XX_PWMx_INVERT); +} + +static inline int ep93xx_pwm_is_inverted(struct ep93xx_pwm *pwm) +{ + return ep93xx_pwm_readl(pwm, EP93XX_PWMx_INVERT) & 0x1; +} + +/* + * /sys/devices/platform/ep93xx-pwm.N + * /min_freq read-only minimum pwm output frequency + * /max_req read-only maximum pwm output frequency + * /freq read-write pwm output frequency (0 = disable output) + * /duty_percent read-write pwm duty cycle percent (1..99) + * /invert read-write invert pwm output + */ + +static ssize_t ep93xx_pwm_get_min_freq(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ep93xx_pwm *pwm = platform_get_drvdata(pdev); + unsigned long rate = clk_get_rate(pwm->clk); + + return sprintf(buf, "%ld\n", rate / (EP93XX_PWM_MAX_COUNT + 1)); +} + +static ssize_t ep93xx_pwm_get_max_freq(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ep93xx_pwm *pwm = platform_get_drvdata(pdev); + unsigned long rate = clk_get_rate(pwm->clk); + + return sprintf(buf, "%ld\n", rate / 2); +} + +static ssize_t ep93xx_pwm_get_freq(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ep93xx_pwm *pwm = platform_get_drvdata(pdev); + + if (ep93xx_pwm_is_enabled(pwm)) { + unsigned long rate = clk_get_rate(pwm->clk); + u16 term = ep93xx_pwm_read_tc(pwm); + + return sprintf(buf, "%ld\n", rate / (term + 1)); + } else { + return sprintf(buf, "disabled\n"); + } +} + +static ssize_t ep93xx_pwm_set_freq(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ep93xx_pwm *pwm = platform_get_drvdata(pdev); + long val; + int err; + + err = strict_strtol(buf, 10, &val); + if (err) + return -EINVAL; + + if (val == 0) { + ep93xx_pwm_disable(pwm); + } else if (val <= (clk_get_rate(pwm->clk) / 2)) { + u32 term, duty; + + val = (clk_get_rate(pwm->clk) / val) - 1; + if (val > EP93XX_PWM_MAX_COUNT) + val = EP93XX_PWM_MAX_COUNT; + if (val < 1) + val = 1; + + term = ep93xx_pwm_read_tc(pwm); + duty = ((val + 1) * pwm->duty_percent / 100) - 1; + + /* If pwm is running, order is important */ + if (val > term) { + ep93xx_pwm_write_tc(pwm, val); + ep93xx_pwm_write_dc(pwm, duty); + } else { + ep93xx_pwm_write_dc(pwm, duty); + ep93xx_pwm_write_tc(pwm, val); + } + + if (!ep93xx_pwm_is_enabled(pwm)) + ep93xx_pwm_enable(pwm); + } else { + return -EINVAL; + } + + return count; +} + +static ssize_t ep93xx_pwm_get_duty_percent(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ep93xx_pwm *pwm = platform_get_drvdata(pdev); + + return sprintf(buf, "%d\n", pwm->duty_percent); +} + +static ssize_t ep93xx_pwm_set_duty_percent(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ep93xx_pwm *pwm = platform_get_drvdata(pdev); + long val; + int err; + + err = strict_strtol(buf, 10, &val); + if (err) + return -EINVAL; + + if (val > 0 && val < 100) { + u32 term = ep93xx_pwm_read_tc(pwm); + ep93xx_pwm_write_dc(pwm, ((term + 1) * val / 100) - 1); + pwm->duty_percent = val; + return count; + } + + return -EINVAL; +} + +static ssize_t ep93xx_pwm_get_invert(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ep93xx_pwm *pwm = platform_get_drvdata(pdev); + + return sprintf(buf, "%d\n", ep93xx_pwm_is_inverted(pwm)); +} + +static ssize_t ep93xx_pwm_set_invert(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ep93xx_pwm *pwm = platform_get_drvdata(pdev); + long val; + int err; + + err = strict_strtol(buf, 10, &val); + if (err) + return -EINVAL; + + if (val == 0) + ep93xx_pwm_normal(pwm); + else if (val == 1) + ep93xx_pwm_invert(pwm); + else + return -EINVAL; + + return count; +} + +static DEVICE_ATTR(min_freq, S_IRUGO, ep93xx_pwm_get_min_freq, NULL); +static DEVICE_ATTR(max_freq, S_IRUGO, ep93xx_pwm_get_max_freq, NULL); +static DEVICE_ATTR(freq, S_IWUGO | S_IRUGO, + ep93xx_pwm_get_freq, ep93xx_pwm_set_freq); +static DEVICE_ATTR(duty_percent, S_IWUGO | S_IRUGO, + ep93xx_pwm_get_duty_percent, ep93xx_pwm_set_duty_percent); +static DEVICE_ATTR(invert, S_IWUGO | S_IRUGO, + ep93xx_pwm_get_invert, ep93xx_pwm_set_invert); + +static struct attribute *ep93xx_pwm_attrs[] = { + &dev_attr_min_freq.attr, + &dev_attr_max_freq.attr, + &dev_attr_freq.attr, + &dev_attr_duty_percent.attr, + &dev_attr_invert.attr, + NULL +}; + +static const struct attribute_group ep93xx_pwm_sysfs_files = { + .attrs = ep93xx_pwm_attrs, +}; + +static int __init ep93xx_pwm_probe(struct platform_device *pdev) +{ + struct ep93xx_pwm *pwm; + struct resource *res; + int err; + + err = ep93xx_pwm_acquire_gpio(pdev); + if (err) + return err; + + pwm = kzalloc(sizeof(struct ep93xx_pwm), GFP_KERNEL); + if (!pwm) { + err = -ENOMEM; + goto fail_no_mem; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + err = -ENXIO; + goto fail_no_mem_resource; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (res == NULL) { + err = -EBUSY; + goto fail_no_mem_resource; + } + + pwm->mmio_base = ioremap(res->start, resource_size(res)); + if (pwm->mmio_base == NULL) { + err = -ENXIO; + goto fail_no_ioremap; + } + + err = sysfs_create_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files); + if (err) + goto fail_no_sysfs; + + pwm->clk = clk_get(&pdev->dev, "pwm_clk"); + if (IS_ERR(pwm->clk)) { + err = PTR_ERR(pwm->clk); + goto fail_no_clk; + } + + pwm->duty_percent = 50; + + platform_set_drvdata(pdev, pwm); + + /* disable pwm at startup. Avoids zero value. */ + ep93xx_pwm_disable(pwm); + ep93xx_pwm_write_tc(pwm, EP93XX_PWM_MAX_COUNT); + ep93xx_pwm_write_dc(pwm, EP93XX_PWM_MAX_COUNT / 2); + + clk_enable(pwm->clk); + + return 0; + +fail_no_clk: + sysfs_remove_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files); +fail_no_sysfs: + iounmap(pwm->mmio_base); +fail_no_ioremap: + release_mem_region(res->start, resource_size(res)); +fail_no_mem_resource: + kfree(pwm); +fail_no_mem: + ep93xx_pwm_release_gpio(pdev); + return err; +} + +static int __exit ep93xx_pwm_remove(struct platform_device *pdev) +{ + struct ep93xx_pwm *pwm = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + ep93xx_pwm_disable(pwm); + clk_disable(pwm->clk); + clk_put(pwm->clk); + platform_set_drvdata(pdev, NULL); + sysfs_remove_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files); + iounmap(pwm->mmio_base); + release_mem_region(res->start, resource_size(res)); + kfree(pwm); + ep93xx_pwm_release_gpio(pdev); + + return 0; +} + +static struct platform_driver ep93xx_pwm_driver = { + .driver = { + .name = "ep93xx-pwm", + .owner = THIS_MODULE, + }, + .remove = __exit_p(ep93xx_pwm_remove), +}; + +static int __init ep93xx_pwm_init(void) +{ + return platform_driver_probe(&ep93xx_pwm_driver, ep93xx_pwm_probe); +} + +static void __exit ep93xx_pwm_exit(void) +{ + platform_driver_unregister(&ep93xx_pwm_driver); +} + +module_init(ep93xx_pwm_init); +module_exit(ep93xx_pwm_exit); + +MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>, " + "H Hartley Sweeten <hsweeten@visionengravers.com>"); +MODULE_DESCRIPTION("EP93xx PWM driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ep93xx-pwm"); diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 8d1c60a..5d778ec 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -235,7 +235,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) skb->ip_summed = CHECKSUM_UNNECESSARY; dev_dbg(xpnet, "passing skb to network layer\n" - KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " + "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " "skb->end=0x%p skb->len=%d\n", (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), skb->len); @@ -399,7 +399,7 @@ xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg, msg->buf_pa = xp_pa((void *)start_addr); dev_dbg(xpnet, "sending XPC message to %d:%d\n" - KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " + "msg->buf_pa=0x%lx, msg->size=%u, " "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, msg->leadin_ignore, msg->tailout_ignore); diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 240608c..a461017 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1313,6 +1313,12 @@ static int mmc_spi_probe(struct spi_device *spi) struct mmc_spi_host *host; int status; + /* We rely on full duplex transfers, mostly to reduce + * per-transfer overheads (by making fewer transfers). + */ + if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) + return -EINVAL; + /* MMC and SD specs only seem to care that sampling is on the * rising edge ... meaning SPI modes 0 or 3. So either SPI mode * should be legit. We'll use mode 0 since the steady state is 0, diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index e1aa847..a923ee2 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -21,6 +21,7 @@ #include <linux/amba/bus.h> #include <linux/clk.h> #include <linux/scatterlist.h> +#include <linux/gpio.h> #include <asm/cacheflush.h> #include <asm/div64.h> @@ -472,17 +473,41 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } } +static int mmci_get_ro(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + + if (host->gpio_wp == -ENOSYS) + return -ENOSYS; + + return gpio_get_value(host->gpio_wp); +} + +static int mmci_get_cd(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + unsigned int status; + + if (host->gpio_cd == -ENOSYS) + status = host->plat->status(mmc_dev(host->mmc)); + else + status = gpio_get_value(host->gpio_cd); + + return !status; +} + static const struct mmc_host_ops mmci_ops = { .request = mmci_request, .set_ios = mmci_set_ios, + .get_ro = mmci_get_ro, + .get_cd = mmci_get_cd, }; static void mmci_check_status(unsigned long data) { struct mmci_host *host = (struct mmci_host *)data; - unsigned int status; + unsigned int status = mmci_get_cd(host->mmc); - status = host->plat->status(mmc_dev(host->mmc)); if (status ^ host->oldstat) mmc_detect_change(host->mmc, 0); @@ -515,12 +540,15 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) host = mmc_priv(mmc); host->mmc = mmc; - /* Bits 12 thru 19 is the designer */ - host->hw_designer = (dev->periphid >> 12) & 0xff; - /* Bits 20 thru 23 is the revison */ - host->hw_revision = (dev->periphid >> 20) & 0xf; + + host->gpio_wp = -ENOSYS; + host->gpio_cd = -ENOSYS; + + host->hw_designer = amba_manf(dev); + host->hw_revision = amba_rev(dev); DBG(host, "designer ID = 0x%02x\n", host->hw_designer); DBG(host, "revision = 0x%01x\n", host->hw_revision); + host->clk = clk_get(&dev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); @@ -591,6 +619,27 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) writel(0, host->base + MMCIMASK1); writel(0xfff, host->base + MMCICLEAR); +#ifdef CONFIG_GPIOLIB + if (gpio_is_valid(plat->gpio_cd)) { + ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)"); + if (ret == 0) + ret = gpio_direction_input(plat->gpio_cd); + if (ret == 0) + host->gpio_cd = plat->gpio_cd; + else if (ret != -ENOSYS) + goto err_gpio_cd; + } + if (gpio_is_valid(plat->gpio_wp)) { + ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)"); + if (ret == 0) + ret = gpio_direction_input(plat->gpio_wp); + if (ret == 0) + host->gpio_wp = plat->gpio_wp; + else if (ret != -ENOSYS) + goto err_gpio_wp; + } +#endif + ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host); if (ret) goto unmap; @@ -602,6 +651,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) writel(MCI_IRQENABLE, host->base + MMCIMASK0); amba_set_drvdata(dev, mmc); + host->oldstat = mmci_get_cd(host->mmc); mmc_add_host(mmc); @@ -620,6 +670,12 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) irq0_free: free_irq(dev->irq[0], host); unmap: + if (host->gpio_wp != -ENOSYS) + gpio_free(host->gpio_wp); + err_gpio_wp: + if (host->gpio_cd != -ENOSYS) + gpio_free(host->gpio_cd); + err_gpio_cd: iounmap(host->base); clk_disable: clk_disable(host->clk); @@ -655,6 +711,11 @@ static int __devexit mmci_remove(struct amba_device *dev) free_irq(dev->irq[0], host); free_irq(dev->irq[1], host); + if (host->gpio_wp != -ENOSYS) + gpio_free(host->gpio_wp); + if (host->gpio_cd != -ENOSYS) + gpio_free(host->gpio_cd); + iounmap(host->base); clk_disable(host->clk); clk_put(host->clk); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 0441bac..839f264 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -151,6 +151,8 @@ struct mmci_host { struct mmc_data *data; struct mmc_host *mmc; struct clk *clk; + int gpio_cd; + int gpio_wp; unsigned int data_xfered; diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index 5011fa7..1479da6 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -194,7 +194,7 @@ static struct mtd_partition * newpart(char *s, parts[this_part].name = extra_mem; extra_mem += name_len + 1; - dbg(("partition %d: name <%s>, offset %x, size %x, mask flags %x\n", + dbg(("partition %d: name <%s>, offset %llx, size %llx, mask flags %x\n", this_part, parts[this_part].name, parts[this_part].offset, diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 59c4612..ae5fe91 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -54,7 +54,7 @@ #define SR_SRWD 0x80 /* SR write protect */ /* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */ +#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ #define CMD_SIZE 4 #ifdef CONFIG_M25PXX_USE_FAST_READ diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 73f0522..d8cf29c 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -226,7 +226,7 @@ static u16 INFTL_findfreeblock(struct INFTLrecord *inftl, int desperate) if (!desperate && inftl->numfreeEUNs < 2) { DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free " "EUNs (%d)\n", inftl->numfreeEUNs); - return 0xffff; + return BLOCK_NIL; } /* Scan for a free block */ @@ -281,7 +281,8 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned silly = MAX_LOOPS; while (thisEUN < inftl->nb_blocks) { for (block = 0; block < inftl->EraseSize/SECTORSIZE; block ++) { - if ((BlockMap[block] != 0xffff) || BlockDeleted[block]) + if ((BlockMap[block] != BLOCK_NIL) || + BlockDeleted[block]) continue; if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) @@ -525,7 +526,7 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block) if (!silly--) { printk(KERN_WARNING "INFTL: infinite loop in " "Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* Skip to next block in chain */ @@ -549,7 +550,7 @@ hitused: * waiting to be picked up. We're going to have to fold * a chain to make room. */ - thisEUN = INFTL_makefreeblock(inftl, 0xffff); + thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL); /* * Hopefully we free something, lets try again. @@ -631,7 +632,7 @@ hitused: printk(KERN_WARNING "INFTL: error folding to make room for Virtual " "Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c index b08a798..2aac41b 100644 --- a/drivers/mtd/maps/integrator-flash.c +++ b/drivers/mtd/maps/integrator-flash.c @@ -42,10 +42,8 @@ #include <mach/hardware.h> #include <asm/system.h> -#define SUBDEV_NAME_SIZE (BUS_ID_SIZE + 2) - struct armflash_subdev_info { - char name[SUBDEV_NAME_SIZE]; + char *name; struct mtd_info *mtd; struct map_info map; struct flash_platform_data *plat; @@ -134,6 +132,8 @@ static void armflash_subdev_remove(struct armflash_subdev_info *subdev) map_destroy(subdev->mtd); if (subdev->map.virt) iounmap(subdev->map.virt); + kfree(subdev->name); + subdev->name = NULL; release_mem_region(subdev->map.phys, subdev->map.size); } @@ -177,16 +177,22 @@ static int armflash_probe(struct platform_device *dev) if (nr == 1) /* No MTD concatenation, just use the default name */ - snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s", - dev_name(&dev->dev)); + subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL); else - snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s-%d", - dev_name(&dev->dev), i); + subdev->name = kasprintf(GFP_KERNEL, "%s-%d", + dev_name(&dev->dev), i); + if (!subdev->name) { + err = -ENOMEM; + break; + } subdev->plat = plat; err = armflash_subdev_probe(subdev, res); - if (err) + if (err) { + kfree(subdev->name); + subdev->name = NULL; break; + } } info->nr_subdev = i; diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 2802992..20c828b 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -534,7 +534,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) &num_partitions); if ((!partitions) || (num_partitions == 0)) { - printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n"); + printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n"); res = ENXIO; goto err_no_partitions; } diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 0cd76f8..ebd07e9 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -11,6 +11,8 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/sched.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -541,7 +543,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); unsigned long timeo = jiffies; - int status, state = this->state; + int status = NAND_STATUS_FAIL, state = this->state; if (state == FL_ERASING) timeo += (HZ * 400) / 1000; @@ -556,8 +558,9 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) while (time_before(jiffies, timeo)) { status = __raw_readb(this->IO_ADDR_R); - if (!(status & 0x40)) + if (status & NAND_STATUS_READY) break; + cond_resched(); } return status; } diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c index 2c410a0..0f5562a 100644 --- a/drivers/mtd/nand/ts7250.c +++ b/drivers/mtd/nand/ts7250.c @@ -24,8 +24,11 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> -#include <asm/io.h> +#include <linux/io.h> + #include <mach/hardware.h> +#include <mach/ts72xx.h> + #include <asm/sizes.h> #include <asm/mach-types.h> diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index e3f8495..fb86cac 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -208,7 +208,7 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) /* Normally, we force a fold to happen before we run out of free blocks completely */ if (!desperate && nftl->numfreeEUNs < 2) { DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n"); - return 0xffff; + return BLOCK_NIL; } /* Scan for a free block */ @@ -230,11 +230,11 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) printk("Argh! No free blocks found! LastFreeEUN = %d, " "FirstEUN = %d\n", nftl->LastFreeEUN, le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN)); - return 0xffff; + return BLOCK_NIL; } } while (pot != nftl->LastFreeEUN); - return 0xffff; + return BLOCK_NIL; } static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock ) @@ -431,7 +431,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p /* add the header so that it is now a valid chain */ oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); - oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff; + oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = BLOCK_NIL; nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8, 8, &retlen, (char *)&oob.u); @@ -515,7 +515,7 @@ static u16 NFTL_makefreeblock( struct NFTLrecord *nftl , unsigned pendingblock) if (ChainLength < 2) { printk(KERN_WARNING "No Virtual Unit Chains available for folding. " "Failing request\n"); - return 0xffff; + return BLOCK_NIL; } return NFTL_foldchain (nftl, LongestChain, pendingblock); @@ -578,7 +578,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* Skip to next block in chain */ @@ -601,7 +601,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) //u16 startEUN = nftl->EUNtable[thisVUC]; //printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC); - writeEUN = NFTL_makefreeblock(nftl, 0xffff); + writeEUN = NFTL_makefreeblock(nftl, BLOCK_NIL); if (writeEUN == BLOCK_NIL) { /* OK, we accept that the above comment is @@ -673,7 +673,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block, diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 286ed59..e1f7d0a 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -657,6 +657,11 @@ static int io_init(struct ubi_device *ubi) if (ubi->mtd->block_isbad && ubi->mtd->block_markbad) ubi->bad_allowed = 1; + if (ubi->mtd->type == MTD_NORFLASH) { + ubi_assert(ubi->mtd->writesize == 1); + ubi->nor_flash = 1; + } + ubi->min_io_size = ubi->mtd->writesize; ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft; @@ -996,6 +1001,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) ubi_msg("number of PEBs reserved for bad PEB handling: %d", ubi->beb_rsvd_pebs); ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec); + ubi_msg("image sequence number: %d", ubi->image_seq); /* * The below lock makes sure we do not race with 'ubi_thread()' which diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c index c0ed60e..54b0186 100644 --- a/drivers/mtd/ubi/debug.c +++ b/drivers/mtd/ubi/debug.c @@ -44,6 +44,8 @@ void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr) be32_to_cpu(ec_hdr->vid_hdr_offset)); printk(KERN_DEBUG "\tdata_offset %d\n", be32_to_cpu(ec_hdr->data_offset)); + printk(KERN_DEBUG "\timage_seq %d\n", + be32_to_cpu(ec_hdr->image_seq)); printk(KERN_DEBUG "\thdr_crc %#08x\n", be32_to_cpu(ec_hdr->hdr_crc)); printk(KERN_DEBUG "erase counter header hexdump:\n"); diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h index 13777e5..a4da7a0 100644 --- a/drivers/mtd/ubi/debug.h +++ b/drivers/mtd/ubi/debug.h @@ -93,6 +93,12 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req); #define UBI_IO_DEBUG 0 #endif +#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID +int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len); +#else +#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0 +#endif + #ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT #define DBG_DISABLE_BGT 1 #else @@ -167,6 +173,7 @@ static inline int ubi_dbg_is_erase_failure(void) #define ubi_dbg_is_bitflip() 0 #define ubi_dbg_is_write_failure() 0 #define ubi_dbg_is_erase_failure() 0 +#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0 #endif /* !CONFIG_MTD_UBI_DEBUG */ #endif /* !__UBI_DEBUG_H__ */ diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index effaff2..4cb6992 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -98,17 +98,12 @@ static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum, static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum); static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum, const struct ubi_vid_hdr *vid_hdr); -static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset, - int len); -static int paranoid_check_empty(struct ubi_device *ubi, int pnum); #else #define paranoid_check_not_bad(ubi, pnum) 0 #define paranoid_check_peb_ec_hdr(ubi, pnum) 0 #define paranoid_check_ec_hdr(ubi, pnum, ec_hdr) 0 #define paranoid_check_peb_vid_hdr(ubi, pnum) 0 #define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0 -#define paranoid_check_all_ff(ubi, pnum, offset, len) 0 -#define paranoid_check_empty(ubi, pnum) 0 #endif /** @@ -244,7 +239,7 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, return err > 0 ? -EINVAL : err; /* The area we are writing to has to contain all 0xFF bytes */ - err = paranoid_check_all_ff(ubi, pnum, offset, len); + err = ubi_dbg_check_all_ff(ubi, pnum, offset, len); if (err) return err > 0 ? -EINVAL : err; @@ -271,8 +266,8 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, addr = (loff_t)pnum * ubi->peb_size + offset; err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf); if (err) { - ubi_err("error %d while writing %d bytes to PEB %d:%d, written" - " %zd bytes", err, len, pnum, offset, written); + ubi_err("error %d while writing %d bytes to PEB %d:%d, written " + "%zd bytes", err, len, pnum, offset, written); ubi_dbg_dump_stack(); } else ubi_assert(written == len); @@ -350,7 +345,7 @@ retry: return -EIO; } - err = paranoid_check_all_ff(ubi, pnum, 0, ubi->peb_size); + err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size); if (err) return err > 0 ? -EINVAL : err; @@ -459,6 +454,54 @@ out: } /** + * nor_erase_prepare - prepare a NOR flash PEB for erasure. + * @ubi: UBI device description object + * @pnum: physical eraseblock number to prepare + * + * NOR flash, or at least some of them, have peculiar embedded PEB erasure + * algorithm: the PEB is first filled with zeroes, then it is erased. And + * filling with zeroes starts from the end of the PEB. This was observed with + * Spansion S29GL512N NOR flash. + * + * This means that in case of a power cut we may end up with intact data at the + * beginning of the PEB, and all zeroes at the end of PEB. In other words, the + * EC and VID headers are OK, but a large chunk of data at the end of PEB is + * zeroed. This makes UBI mistakenly treat this PEB as used and associate it + * with an LEB, which leads to subsequent failures (e.g., UBIFS fails). + * + * This function is called before erasing NOR PEBs and it zeroes out EC and VID + * magic numbers in order to invalidate them and prevent the failures. Returns + * zero in case of success and a negative error code in case of failure. + */ +static int nor_erase_prepare(struct ubi_device *ubi, int pnum) +{ + int err; + size_t written; + loff_t addr; + uint32_t data = 0; + + addr = (loff_t)pnum * ubi->peb_size; + err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data); + if (err) { + ubi_err("error %d while writing 4 bytes to PEB %d:%d, written " + "%zd bytes", err, pnum, 0, written); + ubi_dbg_dump_stack(); + return err; + } + + addr += ubi->vid_hdr_aloffset; + err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data); + if (err) { + ubi_err("error %d while writing 4 bytes to PEB %d:%d, written " + "%zd bytes", err, pnum, ubi->vid_hdr_aloffset, written); + ubi_dbg_dump_stack(); + return err; + } + + return 0; +} + +/** * ubi_io_sync_erase - synchronously erase a physical eraseblock. * @ubi: UBI device description object * @pnum: physical eraseblock number to erase @@ -489,6 +532,12 @@ int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture) return -EROFS; } + if (ubi->nor_flash) { + err = nor_erase_prepare(ubi, pnum); + if (err) + return err; + } + if (torture) { ret = torture_peb(ubi, pnum); if (ret < 0) @@ -672,11 +721,6 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, if (read_err != -EBADMSG && check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) { /* The physical eraseblock is supposedly empty */ - err = paranoid_check_all_ff(ubi, pnum, 0, - ubi->peb_size); - if (err) - return err > 0 ? UBI_IO_BAD_EC_HDR : err; - if (verbose) ubi_warn("no EC header found at PEB %d, " "only 0xFF bytes", pnum); @@ -752,6 +796,7 @@ int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum, ec_hdr->version = UBI_VERSION; ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset); ec_hdr->data_offset = cpu_to_be32(ubi->leb_start); + ec_hdr->image_seq = cpu_to_be32(ubi->image_seq); crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC); ec_hdr->hdr_crc = cpu_to_be32(crc); @@ -947,15 +992,6 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, if (read_err != -EBADMSG && check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) { /* The physical eraseblock is supposedly free */ - - /* - * The below is just a paranoid check, it has to be - * compiled out if paranoid checks are disabled. - */ - err = paranoid_check_empty(ubi, pnum); - if (err) - return err > 0 ? UBI_IO_BAD_VID_HDR : err; - if (verbose) ubi_warn("no VID header found at PEB %d, " "only 0xFF bytes", pnum); @@ -1229,7 +1265,7 @@ exit: } /** - * paranoid_check_all_ff - check that a region of flash is empty. + * ubi_dbg_check_all_ff - check that a region of flash is empty. * @ubi: UBI device description object * @pnum: the physical eraseblock number to check * @offset: the starting offset within the physical eraseblock to check @@ -1239,8 +1275,7 @@ exit: * @offset of the physical eraseblock @pnum, %1 if not, and a negative error * code if an error occurred. */ -static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset, - int len) +int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len) { size_t read; int err; @@ -1276,74 +1311,4 @@ error: return err; } -/** - * paranoid_check_empty - whether a PEB is empty. - * @ubi: UBI device description object - * @pnum: the physical eraseblock number to check - * - * This function makes sure PEB @pnum is empty, which means it contains only - * %0xFF data bytes. Returns zero if the PEB is empty, %1 if not, and a - * negative error code in case of failure. - * - * Empty PEBs have the EC header, and do not have the VID header. The caller of - * this function should have already made sure the PEB does not have the VID - * header. However, this function re-checks that, because it is possible that - * the header and data has already been written to the PEB. - * - * Let's consider a possible scenario. Suppose there are 2 tasks - A and B. - * Task A is in 'wear_leveling_worker()'. It is reading VID header of PEB X to - * find which LEB it corresponds to. PEB X is currently unmapped, and has no - * VID header. Task B is trying to write to PEB X. - * - * Task A: in 'ubi_io_read_vid_hdr()': reads the VID header from PEB X. The - * read data contain all 0xFF bytes; - * Task B: writes VID header and some data to PEB X; - * Task A: assumes PEB X is empty, calls 'paranoid_check_empty()'. And if we - * do not re-read the VID header, and do not cancel the checking if it - * is there, we fail. - */ -static int paranoid_check_empty(struct ubi_device *ubi, int pnum) -{ - int err, offs = ubi->vid_hdr_aloffset, len = ubi->vid_hdr_alsize; - size_t read; - uint32_t magic; - const struct ubi_vid_hdr *vid_hdr; - - mutex_lock(&ubi->dbg_buf_mutex); - err = ubi->mtd->read(ubi->mtd, offs, len, &read, ubi->dbg_peb_buf); - if (err && err != -EUCLEAN) { - ubi_err("error %d while reading %d bytes from PEB %d:%d, " - "read %zd bytes", err, len, pnum, offs, read); - goto error; - } - - vid_hdr = ubi->dbg_peb_buf; - magic = be32_to_cpu(vid_hdr->magic); - if (magic == UBI_VID_HDR_MAGIC) - /* The PEB contains VID header, so it is not empty */ - goto out; - - err = check_pattern(ubi->dbg_peb_buf, 0xFF, len); - if (err == 0) { - ubi_err("flash region at PEB %d:%d, length %d does not " - "contain all 0xFF bytes", pnum, offs, len); - goto fail; - } - -out: - mutex_unlock(&ubi->dbg_buf_mutex); - return 0; - -fail: - ubi_err("paranoid check failed for PEB %d", pnum); - ubi_msg("hex dump of the %d-%d region", offs, offs + len); - print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, - ubi->dbg_peb_buf, len, 1); - err = 1; -error: - ubi_dbg_dump_stack(); - mutex_unlock(&ubi->dbg_buf_mutex); - return err; -} - #endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */ diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index c3d653b..f60895e 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -757,6 +757,8 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, si->is_empty = 0; if (!ec_corr) { + int image_seq; + /* Make sure UBI version is OK */ if (ech->version != UBI_VERSION) { ubi_err("this UBI version is %d, image version is %d", @@ -778,6 +780,18 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, ubi_dbg_dump_ec_hdr(ech); return -EINVAL; } + + image_seq = be32_to_cpu(ech->ec); + if (!si->image_seq_set) { + ubi->image_seq = image_seq; + si->image_seq_set = 1; + } else if (ubi->image_seq != image_seq) { + ubi_err("bad image sequence number %d in PEB %d, " + "expected %d", image_seq, pnum, ubi->image_seq); + ubi_dbg_dump_ec_hdr(ech); + return -EINVAL; + } + } /* OK, we've done with the EC header, let's look at the VID header */ diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h index 61df208..1017cf1 100644 --- a/drivers/mtd/ubi/scan.h +++ b/drivers/mtd/ubi/scan.h @@ -102,6 +102,7 @@ struct ubi_scan_volume { * @mean_ec: mean erase counter value * @ec_sum: a temporary variable used when calculating @mean_ec * @ec_count: a temporary variable used when calculating @mean_ec + * @image_seq_set: indicates @ubi->image_seq is known * * This data structure contains the result of scanning and may be used by other * UBI sub-systems to build final UBI data structures, further error-recovery @@ -124,6 +125,7 @@ struct ubi_scan_info { int mean_ec; uint64_t ec_sum; int ec_count; + int image_seq_set; }; struct ubi_device; diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h index 8419fdc..503ea9b 100644 --- a/drivers/mtd/ubi/ubi-media.h +++ b/drivers/mtd/ubi/ubi-media.h @@ -129,6 +129,7 @@ enum { * @ec: the erase counter * @vid_hdr_offset: where the VID header starts * @data_offset: where the user data start + * @image_seq: image sequence number * @padding2: reserved for future, zeroes * @hdr_crc: erase counter header CRC checksum * @@ -144,6 +145,14 @@ enum { * volume identifier header and user data, relative to the beginning of the * physical eraseblock. These values have to be the same for all physical * eraseblocks. + * + * The @image_seq field is used to validate a UBI image that has been prepared + * for a UBI device. The @image_seq value can be any value, but it must be the + * same on all eraseblocks. UBI will ensure that all new erase counter headers + * also contain this value, and will check the value when scanning at start-up. + * One way to make use of @image_seq is to increase its value by one every time + * an image is flashed over an existing image, then, if the flashing does not + * complete, UBI will detect the error when scanning. */ struct ubi_ec_hdr { __be32 magic; @@ -152,7 +161,8 @@ struct ubi_ec_hdr { __be64 ec; /* Warning: the current limit is 31-bit anyway! */ __be32 vid_hdr_offset; __be32 data_offset; - __u8 padding2[36]; + __be32 image_seq; + __u8 padding2[32]; __be32 hdr_crc; } __attribute__ ((packed)); diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 28acd13..6a5fe96 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -301,6 +301,7 @@ struct ubi_wl_entry; * @vol->readers, @vol->writers, @vol->exclusive, * @vol->ref_count, @vol->mapping and @vol->eba_tbl. * @ref_count: count of references on the UBI device + * @image_seq: image sequence number recorded on EC headers * * @rsvd_pebs: count of reserved physical eraseblocks * @avail_pebs: count of available physical eraseblocks @@ -372,6 +373,7 @@ struct ubi_wl_entry; * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or * not + * @nor_flash: non-zero if working on top of NOR flash * @mtd: MTD device descriptor * * @peb_buf1: a buffer of PEB size used for different purposes @@ -390,6 +392,7 @@ struct ubi_device { struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT]; spinlock_t volumes_lock; int ref_count; + int image_seq; int rsvd_pebs; int avail_pebs; @@ -452,7 +455,8 @@ struct ubi_device { int vid_hdr_offset; int vid_hdr_aloffset; int vid_hdr_shift; - int bad_allowed; + unsigned int bad_allowed:1; + unsigned int nor_flash:1; struct mtd_info *mtd; void *peb_buf1; diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 2b24723..600c722 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -459,6 +459,14 @@ retry: dbg_wl("PEB %d EC %d", e->pnum, e->ec); prot_queue_add(ubi, e); spin_unlock(&ubi->wl_lock); + + err = ubi_dbg_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset, + ubi->peb_size - ubi->vid_hdr_aloffset); + if (err) { + ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum); + return err > 0 ? -EINVAL : err; + } + return e->pnum; } diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c index 85a1817..08787f5 100644 --- a/drivers/net/a2065.c +++ b/drivers/net/a2065.c @@ -569,16 +569,8 @@ static int lance_start_xmit (struct sk_buff *skb, struct net_device *dev) #ifdef DEBUG_DRIVER /* dump the packet */ - { - int i; - - for (i = 0; i < 64; i++) { - if ((i % 16) == 0) - printk("\n" KERN_DEBUG); - printk ("%2.2x ", skb->data [i]); - } - printk("\n"); - } + print_hex_dump(KERN_DEBUG, "skb->data: ", DUMP_PREFIX_NONE, + 16, 1, skb->data, 64, true); #endif entry = lp->tx_new & lp->tx_ring_mod_mask; ib->btx_ring [entry].length = (-skblen) | 0xf000; diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index d6d4ab3..7d227cda 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -158,15 +158,12 @@ module_exit(arcnet_exit); void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc) { - int i; + char hdr[32]; - printk(KERN_DEBUG "%6s: skb dump (%s) follows:", dev->name, desc); - for (i = 0; i < skb->len; i++) { - if (i % 16 == 0) - printk("\n" KERN_DEBUG "[%04X] ", i); - printk("%02X ", ((u_char *) skb->data)[i]); - } - printk("\n"); + /* dump the packet */ + snprintf(hdr, sizeof(hdr), "%6s:%s skb->data:", dev->name, desc); + print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, + 16, 1, skb->data, skb->len, true); } EXPORT_SYMBOL(arcnet_dump_skb); @@ -184,6 +181,7 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum, int i, length; unsigned long flags = 0; static uint8_t buf[512]; + char hdr[32]; /* hw.copy_from_card expects IRQ context so take the IRQ lock to keep it single threaded */ @@ -197,14 +195,10 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum, /* if the offset[0] byte is nonzero, this is a 256-byte packet */ length = (buf[2] ? 256 : 512); - printk(KERN_DEBUG "%6s: packet dump (%s) follows:", dev->name, desc); - for (i = 0; i < length; i++) { - if (i % 16 == 0) - printk("\n" KERN_DEBUG "[%04X] ", i); - printk("%02X ", buf[i]); - } - printk("\n"); - + /* dump the packet */ + snprintf(hdr, sizeof(hdr), "%6s:%s packet dump:", dev->name, desc); + print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, + 16, 1, buf, length, true); } #else diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c index e4afbd6..607007d 100644 --- a/drivers/net/atl1c/atl1c_ethtool.c +++ b/drivers/net/atl1c/atl1c_ethtool.c @@ -281,6 +281,8 @@ static int atl1c_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_PHY) adapter->wol |= AT_WUFC_LNKC; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c index 619c658..4003955 100644 --- a/drivers/net/atl1e/atl1e_ethtool.c +++ b/drivers/net/atl1e/atl1e_ethtool.c @@ -365,6 +365,8 @@ static int atl1e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_PHY) adapter->wol |= AT_WUFC_LNKC; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index f703758..5b4bf3d 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -73,7 +73,7 @@ static inline char *nic_name(struct pci_dev *pdev) #define RX_FRAGS_REFILL_WM (RX_Q_LEN - MAX_RX_POST) #define BE_MAX_LRO_DESCRIPTORS 16 -#define BE_MAX_FRAGS_PER_FRAME 16 +#define BE_MAX_FRAGS_PER_FRAME (min((u32) 16, (u32) MAX_SKB_FRAGS)) struct be_dma_mem { void *va; diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index 9592f22..cccc541 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -162,8 +162,8 @@ be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce) return -EINVAL; adapter->max_rx_coal = coalesce->rx_max_coalesced_frames; - if (adapter->max_rx_coal > MAX_SKB_FRAGS) - adapter->max_rx_coal = MAX_SKB_FRAGS - 1; + if (adapter->max_rx_coal > BE_MAX_FRAGS_PER_FRAME) + adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME; /* if AIC is being turned on now, start with an EQD of 0 */ if (rx_eq->enable_aic == 0 && diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h index b02e805..29c33c7 100644 --- a/drivers/net/benet/be_hw.h +++ b/drivers/net/benet/be_hw.h @@ -55,6 +55,10 @@ #define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK 0x7 /* bits 26 - 28 */ #define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT 26 +/********* ISR0 Register offset **********/ +#define CEV_ISR0_OFFSET 0xC18 +#define CEV_ISR_SIZE 4 + /********* Event Q door bell *************/ #define DB_EQ_OFFSET DB_CQ_OFFSET #define DB_EQ_RING_ID_MASK 0x1FF /* bits 0 - 8 */ diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 66c10c8..c43f6a1 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -666,7 +666,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter, { struct be_queue_info *rxq = &adapter->rx_obj.q; struct be_rx_page_info *page_info; - u16 rxq_idx, i, num_rcvd; + u16 rxq_idx, i, num_rcvd, j; u32 pktsize, hdr_len, curr_frag_len; u8 *start; @@ -709,22 +709,33 @@ static void skb_fill_rx_data(struct be_adapter *adapter, /* More frags present for this completion */ pktsize -= curr_frag_len; /* account for above copied frag */ - for (i = 1; i < num_rcvd; i++) { + for (i = 1, j = 0; i < num_rcvd; i++) { index_inc(&rxq_idx, rxq->len); page_info = get_rx_page_info(adapter, rxq_idx); curr_frag_len = min(pktsize, rx_frag_size); - skb_shinfo(skb)->frags[i].page = page_info->page; - skb_shinfo(skb)->frags[i].page_offset = page_info->page_offset; - skb_shinfo(skb)->frags[i].size = curr_frag_len; + /* Coalesce all frags from the same physical page in one slot */ + if (page_info->page_offset == 0) { + /* Fresh page */ + j++; + skb_shinfo(skb)->frags[j].page = page_info->page; + skb_shinfo(skb)->frags[j].page_offset = + page_info->page_offset; + skb_shinfo(skb)->frags[j].size = 0; + skb_shinfo(skb)->nr_frags++; + } else { + put_page(page_info->page); + } + + skb_shinfo(skb)->frags[j].size += curr_frag_len; skb->len += curr_frag_len; skb->data_len += curr_frag_len; - skb_shinfo(skb)->nr_frags++; pktsize -= curr_frag_len; memset(page_info, 0, sizeof(*page_info)); } + BUG_ON(j > MAX_SKB_FRAGS); done: be_rx_stats_update(adapter, pktsize, num_rcvd); @@ -786,7 +797,7 @@ static void be_rx_compl_process_lro(struct be_adapter *adapter, struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME]; struct be_queue_info *rxq = &adapter->rx_obj.q; u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len; - u16 i, rxq_idx = 0, vid; + u16 i, rxq_idx = 0, vid, j; num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp); pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp); @@ -794,20 +805,28 @@ static void be_rx_compl_process_lro(struct be_adapter *adapter, rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp); remaining = pkt_size; - for (i = 0; i < num_rcvd; i++) { + for (i = 0, j = -1; i < num_rcvd; i++) { page_info = get_rx_page_info(adapter, rxq_idx); curr_frag_len = min(remaining, rx_frag_size); - rx_frags[i].page = page_info->page; - rx_frags[i].page_offset = page_info->page_offset; - rx_frags[i].size = curr_frag_len; - remaining -= curr_frag_len; + /* Coalesce all frags from the same physical page in one slot */ + if (i == 0 || page_info->page_offset == 0) { + /* First frag or Fresh page */ + j++; + rx_frags[j].page = page_info->page; + rx_frags[j].page_offset = page_info->page_offset; + rx_frags[j].size = 0; + } else { + put_page(page_info->page); + } + rx_frags[j].size += curr_frag_len; + remaining -= curr_frag_len; index_inc(&rxq_idx, rxq->len); - memset(page_info, 0, sizeof(*page_info)); } + BUG_ON(j > MAX_SKB_FRAGS); if (likely(!vlanf)) { lro_receive_frags(&adapter->rx_obj.lro_mgr, rx_frags, pkt_size, @@ -1255,15 +1274,17 @@ static irqreturn_t be_intx(int irq, void *dev) { struct be_adapter *adapter = dev; struct be_ctrl_info *ctrl = &adapter->ctrl; - int rx, tx; + int isr; - tx = event_handle(ctrl, &adapter->tx_eq); - rx = event_handle(ctrl, &adapter->rx_eq); + isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET + + ctrl->pci_func * CEV_ISR_SIZE); + if (!isr) + return IRQ_NONE; - if (rx || tx) - return IRQ_HANDLED; - else - return IRQ_NONE; + event_handle(ctrl, &adapter->tx_eq); + event_handle(ctrl, &adapter->rx_eq); + + return IRQ_HANDLED; } static irqreturn_t be_msix_rx(int irq, void *dev) diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c index 9578a3d..206144f 100644 --- a/drivers/net/bmac.c +++ b/drivers/net/bmac.c @@ -428,10 +428,11 @@ bmac_init_phy(struct net_device *dev) printk(KERN_DEBUG "phy registers:"); for (addr = 0; addr < 32; ++addr) { if ((addr & 7) == 0) - printk("\n" KERN_DEBUG); - printk(" %.4x", bmac_mif_read(dev, addr)); + printk(KERN_DEBUG); + printk(KERN_CONT " %.4x", bmac_mif_read(dev, addr)); } - printk("\n"); + printk(KERN_CONT "\n"); + if (bp->is_bmac_plus) { unsigned int capable, ctrl; diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 8678457..85a737c 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -902,6 +902,8 @@ struct bnx2x { u16 rx_quick_cons_trip; u16 rx_ticks_int; u16 rx_ticks; +/* Maximal coalescing timeout in us */ +#define BNX2X_MAX_COALESCE_TOUT (0xf0*12) u32 lin_cnt; diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index fbf1352..c36a5f3 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -484,8 +484,9 @@ static void bnx2x_fw_dump(struct bnx2x *bp) mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104); mark = ((mark + 0x3) & ~0x3); - printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark); + printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark); + printk(KERN_ERR PFX); for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + @@ -500,7 +501,7 @@ static void bnx2x_fw_dump(struct bnx2x *bp) data[8] = 0x0; printk(KERN_CONT "%s", (char *)data); } - printk("\n" KERN_ERR PFX "end of fw dump\n"); + printk(KERN_ERR PFX "end of fw dump\n"); } static void bnx2x_panic_dump(struct bnx2x *bp) @@ -4434,7 +4435,7 @@ static void bnx2x_update_coalesce(struct bnx2x *bp) REG_WR16(bp, BAR_USTRORM_INTMEM + USTORM_SB_HC_DISABLE_OFFSET(port, sb_id, U_SB_ETH_RX_CQ_INDEX), - bp->rx_ticks ? 0 : 1); + (bp->rx_ticks/12) ? 0 : 1); /* HC_INDEX_C_ETH_TX_CQ_CONS */ REG_WR8(bp, BAR_CSTRORM_INTMEM + @@ -4444,7 +4445,7 @@ static void bnx2x_update_coalesce(struct bnx2x *bp) REG_WR16(bp, BAR_CSTRORM_INTMEM + CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id, C_SB_ETH_TX_CQ_INDEX), - bp->tx_ticks ? 0 : 1); + (bp->tx_ticks/12) ? 0 : 1); } } @@ -7354,7 +7355,7 @@ static void bnx2x_reset_task(struct work_struct *work) #ifdef BNX2X_STOP_ON_ERROR BNX2X_ERR("reset task called but STOP_ON_ERROR defined" " so reset not done to allow debug dump,\n" - KERN_ERR " you will need to reboot when done\n"); + " you will need to reboot when done\n"); return; #endif @@ -8637,6 +8638,14 @@ static int bnx2x_nway_reset(struct net_device *dev) return 0; } +static u32 +bnx2x_get_link(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + return bp->link_vars.link_up; +} + static int bnx2x_get_eeprom_len(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); @@ -9061,12 +9070,12 @@ static int bnx2x_set_coalesce(struct net_device *dev, struct bnx2x *bp = netdev_priv(dev); bp->rx_ticks = (u16) coal->rx_coalesce_usecs; - if (bp->rx_ticks > 3000) - bp->rx_ticks = 3000; + if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT) + bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT; bp->tx_ticks = (u16) coal->tx_coalesce_usecs; - if (bp->tx_ticks > 0x3000) - bp->tx_ticks = 0x3000; + if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT) + bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT; if (netif_running(dev)) bnx2x_update_coalesce(bp); @@ -10034,7 +10043,7 @@ static struct ethtool_ops bnx2x_ethtool_ops = { .get_msglevel = bnx2x_get_msglevel, .set_msglevel = bnx2x_set_msglevel, .nway_reset = bnx2x_nway_reset, - .get_link = ethtool_op_get_link, + .get_link = bnx2x_get_link, .get_eeprom_len = bnx2x_get_eeprom_len, .get_eeprom = bnx2x_get_eeprom, .set_eeprom = bnx2x_set_eeprom, diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c index 58afafb..fd5e32c 100644 --- a/drivers/net/cpmac.c +++ b/drivers/net/cpmac.c @@ -1097,7 +1097,7 @@ static const struct net_device_ops cpmac_netdev_ops = { .ndo_start_xmit = cpmac_start_xmit, .ndo_tx_timeout = cpmac_tx_timeout, .ndo_set_multicast_list = cpmac_set_multicast_list, - .ndo_so_ioctl = cpmac_ioctl, + .ndo_do_ioctl = cpmac_ioctl, .ndo_set_config = cpmac_config, .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 538dda4..fb5df5c 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -642,8 +642,7 @@ static int setup_sge_qsets(struct adapter *adap) struct port_info *pi = netdev_priv(dev); pi->qs = &adap->sge.qs[pi->first_qset]; - for (j = pi->first_qset; j < pi->first_qset + pi->nqsets; - ++j, ++qset_idx) { + for (j = 0; j < pi->nqsets; ++j, ++qset_idx) { set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO); err = t3_sge_alloc_qset(adap, qset_idx, 1, (adap->flags & USING_MSIX) ? qset_idx + 1 : diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 2df8fb0..12fd446 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -1820,11 +1820,19 @@ static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) struct device *emac_dev = &priv->ndev->dev; struct sockaddr *sa = addr; + if (!is_valid_ether_addr(sa->sa_data)) + return -EINVAL; + /* Store mac addr in priv and rx channel and set it in EMAC hw */ memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); - memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len); memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len); - emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr); + + /* If the interface is down - rxch is NULL. */ + /* MAC address is configured only after the interface is enabled. */ + if (netif_running(ndev)) { + memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len); + emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr); + } if (netif_msg_drv(priv)) dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n", diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 895d721..4b6a219 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -268,8 +268,9 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) printk(KERN_INFO "tx_coalesce:\t%d packets\n", tx_coalesce); if (np->coalesce) - printk(KERN_INFO "rx_coalesce:\t%d packets\n" - KERN_INFO "rx_timeout: \t%d ns\n", + printk(KERN_INFO + "rx_coalesce:\t%d packets\n" + "rx_timeout: \t%d ns\n", np->rx_coalesce, np->rx_timeout*640); if (np->vlan) printk(KERN_INFO "vlan(id):\t%d\n", np->vlan); @@ -1522,9 +1523,9 @@ mii_get_media (struct net_device *dev) printk (KERN_INFO "Operating at 10 Mbps, "); } if (bmcr & MII_BMCR_DUPLEX_MODE) { - printk ("Full duplex\n"); + printk (KERN_CONT "Full duplex\n"); } else { - printk ("Half duplex\n"); + printk (KERN_CONT "Half duplex\n"); } } if (np->tx_flow) @@ -1614,9 +1615,9 @@ mii_set_media (struct net_device *dev) } if (np->full_duplex) { bmcr |= MII_BMCR_DUPLEX_MODE; - printk ("Full duplex\n"); + printk (KERN_CONT "Full duplex\n"); } else { - printk ("Half duplex\n"); + printk (KERN_CONT "Half duplex\n"); } #if 0 /* Set 1000BaseT Master/Slave setting */ @@ -1669,9 +1670,9 @@ mii_get_media_pcs (struct net_device *dev) __u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR); printk (KERN_INFO "Operating at 1000 Mbps, "); if (bmcr & MII_BMCR_DUPLEX_MODE) { - printk ("Full duplex\n"); + printk (KERN_CONT "Full duplex\n"); } else { - printk ("Half duplex\n"); + printk (KERN_CONT "Half duplex\n"); } } if (np->tx_flow) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 5e3356f..5b8cbdb 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2185,12 +2185,16 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter, /* Free all the Rx ring sk_buffs */ for (i = 0; i < rx_ring->count; i++) { buffer_info = &rx_ring->buffer_info[i]; - if (buffer_info->skb) { + if (buffer_info->dma) { pci_unmap_single(pdev, buffer_info->dma, buffer_info->length, PCI_DMA_FROMDEVICE); + } + + buffer_info->dma = 0; + if (buffer_info->skb) { dev_kfree_skb(buffer_info->skb); buffer_info->skb = NULL; } @@ -4033,6 +4037,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, buffer_info->dma, buffer_info->length, PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; length = le16_to_cpu(rx_desc->length); /* !EOP means multiple descriptors were used to store a single @@ -4222,6 +4227,7 @@ map_skb: pci_unmap_single(pdev, buffer_info->dma, adapter->rx_buffer_len, PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; break; /* while !buffer_info->skb */ } @@ -4817,6 +4823,9 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, netif_device_detach(netdev); + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + if (netif_running(netdev)) e1000_down(adapter); pci_disable_device(pdev); diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 8890c97..c0f185b 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -238,6 +238,7 @@ #define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ #define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ #define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */ +#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ /* Constants used to interpret the masked PCI-X bus speed. */ @@ -575,6 +576,8 @@ #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ #define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ +#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ + /* NVM Control */ #define E1000_EECD_SK 0x00000001 /* NVM Clock */ #define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 163c1c0..fd44d9f 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -215,6 +215,7 @@ enum e1e_registers { E1000_SWSM = 0x05B50, /* SW Semaphore */ E1000_FWSM = 0x05B54, /* FW Semaphore */ E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */ + E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */ E1000_HICR = 0x08F00, /* Host Interface Control */ }; @@ -302,6 +303,9 @@ enum e1e_registers { #define E1000_KMRNCTRLSTA_REN 0x00200000 #define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ #define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ +#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7 +#define E1000_KMRNCTRLSTA_K1_ENABLE 0x140E +#define E1000_KMRNCTRLSTA_K1_DISABLE 0x1400 #define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 #define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */ diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 9e23f50f..d56c747 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -338,6 +338,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) { struct e1000_nvm_info *nvm = &hw->nvm; struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; + union ich8_hws_flash_status hsfsts; u32 gfpreg; u32 sector_base_addr; u32 sector_end_addr; @@ -374,6 +375,20 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Adjust to word count */ nvm->flash_bank_size /= sizeof(u16); + /* + * Make sure the flash bank size does not overwrite the 4k + * sector ranges. We may have 64k allotted to us but we only care + * about the first 2 4k sectors. Therefore, if we have anything less + * than 64k set in the HSFSTS register, we will reduce the bank size + * down to 4k and let the rest remain unused. If berasesz == 3, then + * we are working in 64k mode. Otherwise we are not. + */ + if (nvm->flash_bank_size > E1000_ICH8_SHADOW_RAM_WORDS) { + hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); + if (hsfsts.hsf_status.berasesz != 3) + nvm->flash_bank_size = E1000_ICH8_SHADOW_RAM_WORDS; + } + nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS; /* Clear shadow ram */ @@ -446,6 +461,95 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) return 0; } +/** + * e1000_check_for_copper_link_ich8lan - Check for link (Copper) + * @hw: pointer to the HW structure + * + * Checks to see of the link status of the hardware has changed. If a + * change in link status has been detected, then we read the PHY registers + * to get the current speed/duplex if link exists. + **/ +static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + bool link; + + /* + * We only want to go out to the PHY registers to see if Auto-Neg + * has completed and/or if our link status has changed. The + * get_link_status flag is set upon receiving a Link Status + * Change or Rx Sequence Error interrupt. + */ + if (!mac->get_link_status) { + ret_val = 0; + goto out; + } + + if (hw->mac.type == e1000_pchlan) { + ret_val = e1000e_write_kmrn_reg(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + E1000_KMRNCTRLSTA_K1_ENABLE); + if (ret_val) + goto out; + } + + /* + * First we want to see if the MII Status Register reports + * link. If so, then we want to get the current speed/duplex + * of the PHY. + */ + ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + goto out; + + if (!link) + goto out; /* No link detected */ + + mac->get_link_status = false; + + if (hw->phy.type == e1000_phy_82578) { + ret_val = e1000_link_stall_workaround_hv(hw); + if (ret_val) + goto out; + } + + /* + * Check if there was DownShift, must be checked + * immediately after link-up + */ + e1000e_check_downshift(hw); + + /* + * If we are forcing speed/duplex, then we simply return since + * we have already determined whether we have link or not. + */ + if (!mac->autoneg) { + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + /* + * Auto-Neg is enabled. Auto Speed Detection takes care + * of MAC speed/duplex configuration. So we only need to + * configure Collision Distance in the MAC. + */ + e1000e_config_collision_dist(hw); + + /* + * Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = e1000e_config_fc_after_link_up(hw); + if (ret_val) + hw_dbg(hw, "Error configuring flow control\n"); + +out: + return ret_val; +} + static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -694,6 +798,38 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) } /** + * e1000_lan_init_done_ich8lan - Check for PHY config completion + * @hw: pointer to the HW structure + * + * Check the appropriate indication the MAC has finished configuring the + * PHY after a software reset. + **/ +static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) +{ + u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT; + + /* Wait for basic configuration completes before proceeding */ + do { + data = er32(STATUS); + data &= E1000_STATUS_LAN_INIT_DONE; + udelay(100); + } while ((!data) && --loop); + + /* + * If basic configuration is incomplete before the above loop + * count reaches 0, loading the configuration from NVM will + * leave the PHY in a bad state possibly resulting in no link. + */ + if (loop == 0) + hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n"); + + /* Clear the Init Done bit for the next init event */ + data = er32(STATUS); + data &= ~E1000_STATUS_LAN_INIT_DONE; + ew32(STATUS, data); +} + +/** * e1000_phy_hw_reset_ich8lan - Performs a PHY reset * @hw: pointer to the HW structure * @@ -707,13 +843,15 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) u32 i; u32 data, cnf_size, cnf_base_addr, sw_cfg_mask; s32 ret_val; - u16 loop = E1000_ICH8_LAN_INIT_TIMEOUT; u16 word_addr, reg_data, reg_addr, phy_page = 0; ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) return ret_val; + /* Allow time for h/w to get to a quiescent state after reset */ + mdelay(10); + if (hw->mac.type == e1000_pchlan) { ret_val = e1000_hv_phy_workarounds_ich8lan(hw); if (ret_val) @@ -741,26 +879,8 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) if (!(data & sw_cfg_mask)) return 0; - /* Wait for basic configuration completes before proceeding*/ - do { - data = er32(STATUS); - data &= E1000_STATUS_LAN_INIT_DONE; - udelay(100); - } while ((!data) && --loop); - - /* - * If basic configuration is incomplete before the above loop - * count reaches 0, loading the configuration from NVM will - * leave the PHY in a bad state possibly resulting in no link. - */ - if (loop == 0) { - hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n"); - } - - /* Clear the Init Done bit for the next init event */ - data = er32(STATUS); - data &= ~E1000_STATUS_LAN_INIT_DONE; - ew32(STATUS, data); + /* Wait for basic configuration completes before proceeding */ + e1000_lan_init_done_ich8lan(hw); /* * Make sure HW does not configure LCD from PHY @@ -961,12 +1081,14 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU; ew32(PHY_CTRL, phy_ctrl); + if (phy->type != e1000_phy_igp_3) + return 0; + /* * Call gig speed drop workaround on LPLU before accessing * any PHY registers */ - if ((hw->mac.type == e1000_ich8lan) && - (hw->phy.type == e1000_phy_igp_3)) + if (hw->mac.type == e1000_ich8lan) e1000e_gig_downshift_workaround_ich8lan(hw); /* When LPLU is enabled, we should disable SmartSpeed */ @@ -979,6 +1101,9 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU; ew32(PHY_CTRL, phy_ctrl); + if (phy->type != e1000_phy_igp_3) + return 0; + /* * LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most @@ -1038,6 +1163,10 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active) if (!active) { phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU; ew32(PHY_CTRL, phy_ctrl); + + if (phy->type != e1000_phy_igp_3) + return 0; + /* * LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most @@ -1073,12 +1202,14 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active) phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU; ew32(PHY_CTRL, phy_ctrl); + if (phy->type != e1000_phy_igp_3) + return 0; + /* * Call gig speed drop workaround on LPLU before accessing * any PHY registers */ - if ((hw->mac.type == e1000_ich8lan) && - (hw->phy.type == e1000_phy_igp_3)) + if (hw->mac.type == e1000_ich8lan) e1000e_gig_downshift_workaround_ich8lan(hw); /* When LPLU is enabled, we should disable SmartSpeed */ @@ -1905,7 +2036,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) break; case 1: sector_size = ICH_FLASH_SEG_SIZE_4K; - iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_4K; + iteration = 1; break; case 2: if (hw->mac.type == e1000_ich9lan) { @@ -1917,7 +2048,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) break; case 3: sector_size = ICH_FLASH_SEG_SIZE_64K; - iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_64K; + iteration = 1; break; default: return -E1000_ERR_NVM; @@ -2143,6 +2274,12 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl = er32(CTRL); if (!e1000_check_reset_block(hw)) { + /* Clear PHY Reset Asserted bit */ + if (hw->mac.type >= e1000_pchlan) { + u32 status = er32(STATUS); + ew32(STATUS, status & ~E1000_STATUS_PHYRA); + } + /* * PHY HW reset requires MAC CORE reset at the same * time to make sure the interface between MAC and the @@ -2156,23 +2293,34 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); - if (!ret_val) { - /* release the swflag because it is not reset by - * hardware reset - */ + if (!ret_val) e1000_release_swflag_ich8lan(hw); - } - ret_val = e1000e_get_auto_rd_done(hw); - if (ret_val) { - /* - * When auto config read does not complete, do not - * return with an error. This can happen in situations - * where there is no eeprom and prevents getting link. - */ - hw_dbg(hw, "Auto Read Done did not complete\n"); + if (ctrl & E1000_CTRL_PHY_RST) + ret_val = hw->phy.ops.get_cfg_done(hw); + + if (hw->mac.type >= e1000_ich10lan) { + e1000_lan_init_done_ich8lan(hw); + } else { + ret_val = e1000e_get_auto_rd_done(hw); + if (ret_val) { + /* + * When auto config read does not complete, do not + * return with an error. This can happen in situations + * where there is no eeprom and prevents getting link. + */ + hw_dbg(hw, "Auto Read Done did not complete\n"); + } } + /* + * For PCH, this write will make sure that any noise + * will be detected as a CRC error and be dropped rather than show up + * as a bad packet to the DMA engine. + */ + if (hw->mac.type == e1000_pchlan) + ew32(CRC_OFFSET, 0x65656565); + ew32(IMC, 0xffffffff); icr = er32(ICR); @@ -2222,6 +2370,18 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); + /* + * The 82578 Rx buffer will stall if wakeup is enabled in host and + * the ME. Reading the BM_WUC register will clear the host wakeup bit. + * Reset the phy after disabling host wakeup to reset the Rx buffer. + */ + if (hw->phy.type == e1000_phy_82578) { + hw->phy.ops.read_phy_reg(hw, BM_WUC, &i); + ret_val = e1000_phy_hw_reset_ich8lan(hw); + if (ret_val) + return ret_val; + } + /* Setup link and flow control */ ret_val = e1000_setup_link_ich8lan(hw); @@ -2254,16 +2414,6 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) ew32(CTRL_EXT, ctrl_ext); /* - * The 82578 Rx buffer will stall if wakeup is enabled in host and - * the ME. Reading the BM_WUC register will clear the host wakeup bit. - * Reset the phy after disabling host wakeup to reset the Rx buffer. - */ - if (hw->phy.type == e1000_phy_82578) { - e1e_rphy(hw, BM_WUC, &i); - e1000e_phy_hw_reset_generic(hw); - } - - /* * Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there @@ -2485,6 +2635,14 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed, if (ret_val) return ret_val; + if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) { + ret_val = e1000e_write_kmrn_reg(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + E1000_KMRNCTRLSTA_K1_DISABLE); + if (ret_val) + return ret_val; + } + if ((hw->mac.type == e1000_ich8lan) && (hw->phy.type == e1000_phy_igp_3) && (*speed == SPEED_1000)) { @@ -2850,6 +3008,16 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) { u32 bank = 0; + if (hw->mac.type >= e1000_pchlan) { + u32 status = er32(STATUS); + + if (status & E1000_STATUS_PHYRA) + ew32(STATUS, status & ~E1000_STATUS_PHYRA); + else + hw_dbg(hw, + "PHY Reset Asserted not set - needs delay\n"); + } + e1000e_get_cfg_done(hw); /* If EEPROM is not marked present, init the IGP 3 PHY manually */ @@ -2921,7 +3089,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw) static struct e1000_mac_operations ich8_mac_ops = { .id_led_init = e1000e_id_led_init, .check_mng_mode = e1000_check_mng_mode_ich8lan, - .check_for_link = e1000e_check_for_copper_link, + .check_for_link = e1000_check_for_copper_link_ich8lan, /* cleanup_led dependent on mac type */ .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan, .get_bus_info = e1000_get_bus_info_ich8lan, diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index be6d9e9..99ba2b8 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -378,12 +378,6 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) mac->get_link_status = 0; - if (hw->phy.type == e1000_phy_82578) { - ret_val = e1000_link_stall_workaround_hv(hw); - if (ret_val) - return ret_val; - } - /* * Check if there was DownShift, must be checked * immediately after link-up diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 679885a..63415bb 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4785,6 +4785,9 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, netif_device_detach(netdev); + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + if (netif_running(netdev)) e1000e_down(adapter); pci_disable_device(pdev); diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index e23459c..994401f 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -1531,7 +1531,12 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, */ ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); if (ret_val) - break; + /* + * If the first read fails, another entity may have + * ownership of the resources, wait and try again to + * see if they have relinquished the resources yet. + */ + udelay(usec_interval); ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); if (ret_val) break; @@ -2737,6 +2742,11 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) if (hw->phy.type != e1000_phy_82578) goto out; + /* Do not apply workaround if in PHY loopback bit 14 set */ + hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data); + if (data & PHY_CONTROL_LB) + goto out; + /* check if link is up and at 1Gbps */ ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data); if (ret_val) diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index b60e27d..88d7ebf 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -338,8 +338,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, #ifndef MODULE static int printed_version; if (!printed_version++) - printk (KERN_INFO "%s" KERN_INFO "%s", - version, version2); + printk(KERN_INFO "%s%s", version, version2); #endif card_idx++; @@ -1600,7 +1599,7 @@ static int __init epic_init (void) { /* when a module, this is printed whether or not devices are found in probe */ #ifdef MODULE - printk (KERN_INFO "%s" KERN_INFO "%s", + printk (KERN_INFO "%s%s", version, version2); #endif diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index 891be28..48385c4 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -1209,17 +1209,20 @@ static void fealnx_tx_timeout(struct net_device *dev) unsigned long flags; int i; - printk(KERN_WARNING "%s: Transmit timed out, status %8.8x," - " resetting...\n", dev->name, ioread32(ioaddr + ISR)); + printk(KERN_WARNING + "%s: Transmit timed out, status %8.8x, resetting...\n", + dev->name, ioread32(ioaddr + ISR)); { printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int) np->rx_ring[i].status); - printk("\n" KERN_DEBUG " Tx ring %p: ", np->tx_ring); + printk(KERN_CONT " %8.8x", + (unsigned int) np->rx_ring[i].status); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x", np->tx_ring[i].status); - printk("\n"); + printk(KERN_CONT " %4.4x", np->tx_ring[i].status); + printk(KERN_CONT "\n"); } spin_lock_irqsave(&np->lock, flags); diff --git a/drivers/net/fec.h b/drivers/net/fec.h index 30b7dd6..cc47f3f 100644 --- a/drivers/net/fec.h +++ b/drivers/net/fec.h @@ -46,12 +46,12 @@ #else -#define FEC_ECNTRL; 0x000 /* Ethernet control reg */ -#define FEC_IEVENT; 0x004 /* Interrupt even reg */ -#define FEC_IMASK; 0x008 /* Interrupt mask reg */ -#define FEC_IVEC; 0x00c /* Interrupt vec status reg */ -#define FEC_R_DES_ACTIVE; 0x010 /* Receive descriptor reg */ -#define FEC_X_DES_ACTIVE; 0x01c /* Transmit descriptor reg */ +#define FEC_ECNTRL 0x000 /* Ethernet control reg */ +#define FEC_IEVENT 0x004 /* Interrupt even reg */ +#define FEC_IMASK 0x008 /* Interrupt mask reg */ +#define FEC_IVEC 0x00c /* Interrupt vec status reg */ +#define FEC_R_DES_ACTIVE 0x010 /* Receive descriptor reg */ +#define FEC_X_DES_ACTIVE 0x014 /* Transmit descriptor reg */ #define FEC_MII_DATA 0x040 /* MII manage frame reg */ #define FEC_MII_SPEED 0x044 /* MII speed control reg */ #define FEC_R_BOUND 0x08c /* FIFO receive bound reg */ diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 1094d29..3b4e076 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -3514,11 +3514,13 @@ static irqreturn_t nv_nic_irq(int foo, void *data) nv_msi_workaround(np); #ifdef CONFIG_FORCEDETH_NAPI - napi_schedule(&np->napi); - - /* Disable furthur irq's - (msix not enabled with napi) */ - writel(0, base + NvRegIrqMask); + if (napi_schedule_prep(&np->napi)) { + /* + * Disable further irq's (msix not enabled with napi) + */ + writel(0, base + NvRegIrqMask); + __napi_schedule(&np->napi); + } #else do @@ -3615,12 +3617,13 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data) nv_msi_workaround(np); #ifdef CONFIG_FORCEDETH_NAPI - napi_schedule(&np->napi); - - /* Disable furthur irq's - (msix not enabled with napi) */ - writel(0, base + NvRegIrqMask); - + if (napi_schedule_prep(&np->napi)) { + /* + * Disable further irq's (msix not enabled with napi) + */ + writel(0, base + NvRegIrqMask); + __napi_schedule(&np->napi); + } #else do { diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c index 3af5813..d167090 100644 --- a/drivers/net/fsl_pq_mdio.c +++ b/drivers/net/fsl_pq_mdio.c @@ -188,7 +188,7 @@ static int fsl_pq_mdio_find_free(struct mii_bus *new_bus) } -#ifdef CONFIG_GIANFAR +#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs) { struct gfar __iomem *enet_regs; @@ -206,7 +206,7 @@ static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs) #endif -#ifdef CONFIG_UCC_GETH +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id) { struct device_node *np = NULL; @@ -291,7 +291,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev, if (of_device_is_compatible(np, "fsl,gianfar-mdio") || of_device_is_compatible(np, "fsl,gianfar-tbi") || of_device_is_compatible(np, "gianfar")) { -#ifdef CONFIG_GIANFAR +#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) tbipa = get_gfar_tbipa(regs); #else err = -ENODEV; @@ -299,7 +299,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev, #endif } else if (of_device_is_compatible(np, "fsl,ucc-mdio") || of_device_is_compatible(np, "ucc_geth_phy")) { -#ifdef CONFIG_UCC_GETH +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) u32 id; static u32 mii_mng_master; diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index 9d5b62c..d62378c 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -173,8 +173,8 @@ static int tx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; static const char version[] __devinitconst = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n" -KERN_INFO " Some modifications by Eric kasten <kasten@nscl.msu.edu>\n" -KERN_INFO " Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n"; +" Some modifications by Eric kasten <kasten@nscl.msu.edu>\n" +" Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n"; /* IP_MF appears to be only defined in <netinet/ip.h>, however, @@ -1080,11 +1080,14 @@ static void hamachi_tx_timeout(struct net_device *dev) { printk(KERN_DEBUG " Rx ring %p: ", hmp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length)); - printk("\n"KERN_DEBUG" Tx ring %p: ", hmp->tx_ring); + printk(KERN_CONT " %8.8x", + le32_to_cpu(hmp->rx_ring[i].status_n_length)); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG" Tx ring %p: ", hmp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length)); - printk("\n"); + printk(KERN_CONT " %4.4x", + le32_to_cpu(hmp->tx_ring[i].status_n_length)); + printk(KERN_CONT "\n"); } /* Reinit the hardware and make sure the Rx and Tx processes @@ -1753,13 +1756,13 @@ static int hamachi_close(struct net_device *dev) #ifdef __i386__ if (hamachi_debug > 2) { - printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n", + printk(KERN_DEBUG " Tx ring at %8.8x:\n", (int)hmp->tx_ring_dma); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %c #%d desc. %8.8x %8.8x.\n", + printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x.\n", readl(ioaddr + TxCurPtr) == (long)&hmp->tx_ring[i] ? '>' : ' ', i, hmp->tx_ring[i].status_n_length, hmp->tx_ring[i].addr); - printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + printk(KERN_DEBUG " Rx ring %8.8x:\n", (int)hmp->rx_ring_dma); for (i = 0; i < RX_RING_SIZE; i++) { printk(KERN_DEBUG " %c #%d desc. %4.4x %8.8x\n", @@ -1770,7 +1773,7 @@ static int hamachi_close(struct net_device *dev) u16 *addr = (u16 *) hmp->rx_skbuff[i]->data; int j; - + printk(KERN_DEBUG "Addr: "); for (j = 0; j < 0x50; j++) printk(" %4.4x", addr[j]); printk("\n"); diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 5e4b7af..3527032 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -68,7 +68,7 @@ static const char paranoia_str[] = KERN_ERR static const char bc_drvname[] = "baycom_epp"; static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c index 2e6fc4d..5f5af9a 100644 --- a/drivers/net/hamradio/baycom_par.c +++ b/drivers/net/hamradio/baycom_par.c @@ -102,7 +102,7 @@ static const char bc_drvname[] = "baycom_par"; static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index b6a816e..aa4488e 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -91,7 +91,7 @@ static const char bc_drvname[] = "baycom_ser_fdx"; static const char bc_drvinfo[] = KERN_INFO "baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c index 3bcc57a..88c5935 100644 --- a/drivers/net/hamradio/baycom_ser_hdx.c +++ b/drivers/net/hamradio/baycom_ser_hdx.c @@ -79,7 +79,7 @@ static const char bc_drvname[] = "baycom_ser_hdx"; static const char bc_drvinfo[] = KERN_INFO "baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index efd9be2..ac28dd5 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -190,6 +190,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) phy->ops.write_reg = igb_write_phy_reg_igp; } + /* set lan id */ + hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >> + E1000_STATUS_FUNC_SHIFT; + /* Set phy->phy_addr and phy->id. */ ret_val = igb_get_phy_id_82575(hw); if (ret_val) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index ea17319..be48029 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -4549,11 +4549,12 @@ static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring, cleaned = true; cleaned_count++; + /* this is the fast path for the non-packet split case */ if (!adapter->rx_ps_hdr_size) { pci_unmap_single(pdev, buffer_info->dma, - adapter->rx_buffer_len + - NET_IP_ALIGN, + adapter->rx_buffer_len, PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; skb_put(skb, length); goto send_up; } @@ -4570,8 +4571,9 @@ static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring, if (!skb_shinfo(skb)->nr_frags) { pci_unmap_single(pdev, buffer_info->dma, - adapter->rx_ps_hdr_size + NET_IP_ALIGN, + adapter->rx_ps_hdr_size, PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; skb_put(skb, hlen); } @@ -4713,7 +4715,6 @@ static void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring, bufsz = adapter->rx_ps_hdr_size; else bufsz = adapter->rx_buffer_len; - bufsz += NET_IP_ALIGN; while (cleaned_count--) { rx_desc = E1000_RX_DESC_ADV(*rx_ring, i); @@ -4737,7 +4738,7 @@ static void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring, } if (!buffer_info->skb) { - skb = netdev_alloc_skb(netdev, bufsz); + skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN); if (!skb) { adapter->alloc_rx_buff_failed++; goto no_buffers; @@ -5338,6 +5339,9 @@ static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev, netif_device_detach(netdev); + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + if (netif_running(netdev)) igb_down(adapter); pci_disable_device(pdev); diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c index f3eed6a..911c082 100644 --- a/drivers/net/irda/bfin_sir.c +++ b/drivers/net/irda/bfin_sir.c @@ -677,6 +677,14 @@ static int bfin_sir_init_iobuf(iobuff_t *io, int size) return 0; } +static const struct net_device_ops bfin_sir_ndo = { + .ndo_open = bfin_sir_open, + .ndo_stop = bfin_sir_stop, + .ndo_start_xmit = bfin_sir_hard_xmit, + .ndo_do_ioctl = bfin_sir_ioctl, + .ndo_get_stats = bfin_sir_stats, +}; + static int __devinit bfin_sir_probe(struct platform_device *pdev) { struct net_device *dev; @@ -718,12 +726,8 @@ static int __devinit bfin_sir_probe(struct platform_device *pdev) if (err) goto err_mem_3; - dev->hard_start_xmit = bfin_sir_hard_xmit; - dev->open = bfin_sir_open; - dev->stop = bfin_sir_stop; - dev->do_ioctl = bfin_sir_ioctl; - dev->get_stats = bfin_sir_stats; - dev->irq = sir_port->irq; + dev->netdev_ops = &bfin_sir_ndo; + dev->irq = sir_port->irq; irda_init_max_qos_capabilies(&self->qos); diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index d56890f..7c5978a 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -138,6 +138,10 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) adapter->hw.fc.requested_mode = ixgbe_fc_none; } adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; + if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; + adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; + } adapter->flags |= IXGBE_FLAG_DCB_ENABLED; ixgbe_init_interrupt_scheme(adapter); if (netif_running(netdev)) @@ -154,6 +158,8 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) adapter->dcb_cfg.pfc_mode_enable = false; adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; adapter->flags |= IXGBE_FLAG_RSS_ENABLED; + if (adapter->hw.mac.type == ixgbe_mac_82599EB) + adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; ixgbe_init_interrupt_scheme(adapter); if (netif_running(netdev)) netdev->netdev_ops->ndo_open(netdev); diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 86f4f3e..2a97800 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -139,7 +139,7 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->autoneg = AUTONEG_ENABLE; ecmd->transceiver = XCVR_EXTERNAL; if ((hw->phy.media_type == ixgbe_media_type_copper) || - (hw->mac.type == ixgbe_mac_82599EB)) { + (hw->phy.multispeed_fiber)) { ecmd->supported |= (SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg); @@ -217,7 +217,7 @@ static int ixgbe_set_settings(struct net_device *netdev, s32 err = 0; if ((hw->phy.media_type == ixgbe_media_type_copper) || - (hw->mac.type == ixgbe_mac_82599EB)) { + (hw->phy.multispeed_fiber)) { /* 10000/copper and 1000/copper must autoneg * this function does not support any duplex forcing, but can * limit the advertising of the adapter to only 10000 or 1000 */ @@ -245,6 +245,7 @@ static int ixgbe_set_settings(struct net_device *netdev, } else { /* in this case we currently only support 10Gb/FULL */ if ((ecmd->autoneg == AUTONEG_ENABLE) || + (ecmd->advertising != ADVERTISED_10000baseT_Full) || (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)) return -EINVAL; } @@ -1829,7 +1830,6 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter, break; default: wol->supported = 0; - retval = 0; } return retval; diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index e756e22..e3442f4 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -563,7 +563,6 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, union ixgbe_adv_rx_desc *rx_desc; struct ixgbe_rx_buffer *bi; unsigned int i; - unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN; i = rx_ring->next_to_use; bi = &rx_ring->rx_buffer_info[i]; @@ -593,7 +592,9 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, if (!bi->skb) { struct sk_buff *skb; - skb = netdev_alloc_skb(adapter->netdev, bufsz); + skb = netdev_alloc_skb(adapter->netdev, + (rx_ring->rx_buf_len + + NET_IP_ALIGN)); if (!skb) { adapter->alloc_rx_buff_failed++; @@ -608,7 +609,8 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, skb_reserve(skb, NET_IP_ALIGN); bi->skb = skb; - bi->dma = pci_map_single(pdev, skb->data, bufsz, + bi->dma = pci_map_single(pdev, skb->data, + rx_ring->rx_buf_len, PCI_DMA_FROMDEVICE); } /* Refresh the desc even if buffer_addrs didn't change because @@ -732,6 +734,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, pci_unmap_single(pdev, rx_buffer_info->dma, rx_ring->rx_buf_len, PCI_DMA_FROMDEVICE); + rx_buffer_info->dma = 0; skb_put(skb, len); } @@ -2694,16 +2697,23 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) /* * For hot-pluggable SFP+ devices, a new SFP+ module may have - * arrived before interrupts were enabled. We need to kick off - * the SFP+ module setup first, then try to bring up link. + * arrived before interrupts were enabled but after probe. Such + * devices wouldn't have their type identified yet. We need to + * kick off the SFP+ module setup first, then try to bring up link. * If we're not hot-pluggable SFP+, we just need to configure link * and bring it up. */ - err = hw->phy.ops.identify(hw); - if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err); - ixgbe_down(adapter); - return err; + if (hw->phy.type == ixgbe_phy_unknown) { + err = hw->phy.ops.identify(hw); + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { + /* + * Take the device down and schedule the sfp tasklet + * which will unregister_netdev and log it. + */ + ixgbe_down(adapter); + schedule_work(&adapter->sfp_config_module_task); + return err; + } } if (ixgbe_is_sfp(hw)) { @@ -2812,9 +2822,11 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter, } if (!rx_buffer_info->page) continue; - pci_unmap_page(pdev, rx_buffer_info->page_dma, PAGE_SIZE / 2, - PCI_DMA_FROMDEVICE); - rx_buffer_info->page_dma = 0; + if (rx_buffer_info->page_dma) { + pci_unmap_page(pdev, rx_buffer_info->page_dma, + PAGE_SIZE / 2, PCI_DMA_FROMDEVICE); + rx_buffer_info->page_dma = 0; + } put_page(rx_buffer_info->page); rx_buffer_info->page = NULL; rx_buffer_info->page_offset = 0; @@ -3118,7 +3130,11 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter) #endif if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n"); - ixgbe_set_rss_queues(adapter); + if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) || + (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) + ixgbe_set_fdir_queues(adapter); + else + ixgbe_set_rss_queues(adapter); } /* adding FCoE rx rings to the end */ f->mask = adapter->num_rx_queues; @@ -3376,7 +3392,12 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter) } #endif /* CONFIG_IXGBE_DCB */ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { - ixgbe_cache_ring_rss(adapter); + if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) || + (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) + ixgbe_cache_ring_fdir(adapter); + else + ixgbe_cache_ring_rss(adapter); + fcoe_i = f->mask; } for (i = 0; i < f->indices; i++, fcoe_i++) @@ -3716,14 +3737,15 @@ static void ixgbe_sfp_task(struct work_struct *work) if ((hw->phy.type == ixgbe_phy_nl) && (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) { s32 ret = hw->phy.ops.identify_sfp(hw); - if (ret) + if (ret == IXGBE_ERR_SFP_NOT_PRESENT) goto reschedule; ret = hw->phy.ops.reset(hw); if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) { - DPRINTK(PROBE, ERR, "failed to initialize because an " - "unsupported SFP+ module type was detected.\n" - "Reload the driver after installing a " - "supported module.\n"); + dev_err(&adapter->pdev->dev, "failed to initialize " + "because an unsupported SFP+ module type " + "was detected.\n" + "Reload the driver after installing a " + "supported module.\n"); unregister_netdev(adapter->netdev); } else { DPRINTK(PROBE, INFO, "detected SFP+: %d\n", @@ -4502,7 +4524,8 @@ static void ixgbe_multispeed_fiber_task(struct work_struct *work) u32 autoneg; adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK; - if (hw->mac.ops.get_link_capabilities) + autoneg = hw->phy.autoneg_advertised; + if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) hw->mac.ops.get_link_capabilities(hw, &autoneg, &hw->mac.autoneg); if (hw->mac.ops.setup_link_speed) @@ -4524,10 +4547,17 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work) u32 err; adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK; + + /* Time for electrical oscillations to settle down */ + msleep(100); err = hw->phy.ops.identify_sfp(hw); + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err); - ixgbe_down(adapter); + dev_err(&adapter->pdev->dev, "failed to initialize because " + "an unsupported SFP+ module type was detected.\n" + "Reload the driver after installing a supported " + "module.\n"); + unregister_netdev(adapter->netdev); return; } hw->mac.ops.setup_sfp(hw); @@ -5513,8 +5543,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, round_jiffies(jiffies + (2 * HZ))); err = 0; } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - dev_err(&adapter->pdev->dev, "failed to load because an " - "unsupported SFP+ module type was detected.\n"); + dev_err(&adapter->pdev->dev, "failed to initialize because " + "an unsupported SFP+ module type was detected.\n" + "Reload the driver after installing a supported " + "module.\n"); goto err_sw_init; } else if (err) { dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err); @@ -5555,12 +5587,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, netdev->features |= NETIF_F_FCOE_CRC; netdev->features |= NETIF_F_FSO; netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1; - DPRINTK(DRV, INFO, "FCoE enabled, " - "disabling Flow Director\n"); - adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; - adapter->flags &= - ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; - adapter->atr_sample_rate = 0; } else { adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; } diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 453e966..9ecad17 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -60,6 +60,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) if (hw->phy.type == ixgbe_phy_unknown) { for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { + hw->phy.mdio.prtad = phy_addr; if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) { ixgbe_get_phy_id(hw); hw->phy.type = @@ -68,6 +69,8 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) break; } } + /* clear value if nothing found */ + hw->phy.mdio.prtad = 0; } else { status = 0; } diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c index dc45e98..6851bdb 100644 --- a/drivers/net/mdio.c +++ b/drivers/net/mdio.c @@ -14,6 +14,10 @@ #include <linux/mdio.h> #include <linux/module.h> +MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers"); +MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc."); +MODULE_LICENSE("GPL"); + /** * mdio45_probe - probe for an MDIO (clause 45) device * @mdio: MDIO interface diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index c9bfe4e..78c0883 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -130,8 +130,8 @@ static int full_duplex[MAX_UNITS]; static const char version[] __devinitconst = KERN_INFO DRV_NAME " dp8381x driver, version " DRV_VERSION ", " DRV_RELDATE "\n" - KERN_INFO " originally by Donald Becker <becker@scyld.com>\n" - KERN_INFO " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n"; + " originally by Donald Becker <becker@scyld.com>\n" + " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver"); diff --git a/drivers/net/ne.c b/drivers/net/ne.c index 5c3e242..992dbff 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -321,7 +321,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } if (ei_debug && version_printed++ == 0) - printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2); + printk(KERN_INFO "%s%s", version1, version2); printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr); diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 970cede..e1cdba7 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -60,7 +60,18 @@ #define _NETXEN_NIC_LINUX_SUBVERSION 30 #define NETXEN_NIC_LINUX_VERSIONID "4.0.30" -#define NETXEN_VERSION_CODE(a, b, c) (((a) << 16) + ((b) << 8) + (c)) +#define NETXEN_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c)) +#define _major(v) (((v) >> 24) & 0xff) +#define _minor(v) (((v) >> 16) & 0xff) +#define _build(v) ((v) & 0xffff) + +/* version in image has weird encoding: + * 7:0 - major + * 15:8 - minor + * 31:16 - build (little endian) + */ +#define NETXEN_DECODE_VERSION(v) \ + NETXEN_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16)) #define NETXEN_NUM_FLASH_SECTORS (64) #define NETXEN_FLASH_SECTOR_SIZE (64 * 1024) @@ -614,6 +625,7 @@ struct netxen_new_user_info { #define NX_P2_MN_ROMIMAGE 0 #define NX_P3_CT_ROMIMAGE 1 #define NX_P3_MN_ROMIMAGE 2 +#define NX_FLASH_ROMIMAGE 3 #define NETXEN_USER_START_OLD NETXEN_PXE_START /* for backward compatibility */ @@ -1243,7 +1255,7 @@ struct netxen_adapter { u32 resv3; u8 has_link_events; - u8 resv1; + u8 fw_type; u16 tx_context_id; u16 mtu; u16 is_up; @@ -1387,6 +1399,7 @@ void netxen_free_adapter_offload(struct netxen_adapter *adapter); int netxen_initialize_adapter_offload(struct netxen_adapter *adapter); int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val); int netxen_load_firmware(struct netxen_adapter *adapter); +int netxen_need_fw_reset(struct netxen_adapter *adapter); void netxen_request_firmware(struct netxen_adapter *adapter); void netxen_release_firmware(struct netxen_adapter *adapter); int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose); diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 3cc0478..8241036 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -853,6 +853,7 @@ enum { #define NX_PEG_TUNE_CAPABILITY (NETXEN_CAM_RAM(0x02c)) #define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL (0x14) +#define NETXEN_PEG_ALIVE_COUNTER (NETXEN_CAM_RAM(0xb0)) #define ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC))) #define ISR_LEGACY_INT_TRIGGERED(VAL) (((VAL) & 0x300) == 0x200) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 055bb61..b899bd5 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -684,11 +684,84 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) } int +netxen_need_fw_reset(struct netxen_adapter *adapter) +{ + u32 count, old_count; + u32 val, version, major, minor, build; + int i, timeout; + u8 fw_type; + + /* NX2031 firmware doesn't support heartbit */ + if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) + return 1; + + /* last attempt had failed */ + if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED) + return 1; + + old_count = count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER); + + for (i = 0; i < 10; i++) { + + timeout = msleep_interruptible(200); + if (timeout) { + NXWR32(adapter, CRB_CMDPEG_STATE, + PHAN_INITIALIZE_FAILED); + return -EINTR; + } + + count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER); + if (count != old_count) + break; + } + + /* firmware is dead */ + if (count == old_count) + return 1; + + /* check if we have got newer or different file firmware */ + if (adapter->fw) { + + const struct firmware *fw = adapter->fw; + + val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]); + version = NETXEN_DECODE_VERSION(val); + + major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR); + minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR); + build = NXRD32(adapter, NETXEN_FW_VERSION_SUB); + + if (version > NETXEN_VERSION_CODE(major, minor, build)) + return 1; + + if (version == NETXEN_VERSION_CODE(major, minor, build)) { + + val = NXRD32(adapter, NETXEN_MIU_MN_CONTROL); + fw_type = (val & 0x4) ? + NX_P3_CT_ROMIMAGE : NX_P3_MN_ROMIMAGE; + + if (adapter->fw_type != fw_type) + return 1; + } + } + + return 0; +} + +static char *fw_name[] = { + "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin", "flash", +}; + +int netxen_load_firmware(struct netxen_adapter *adapter) { u64 *ptr64; u32 i, flashaddr, size; const struct firmware *fw = adapter->fw; + struct pci_dev *pdev = adapter->pdev; + + dev_info(&pdev->dev, "loading firmware from %s\n", + fw_name[adapter->fw_type]); if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 1); @@ -756,7 +829,7 @@ static int netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname) { __le32 val; - u32 major, minor, build, ver, min_ver, bios; + u32 ver, min_ver, bios; struct pci_dev *pdev = adapter->pdev; const struct firmware *fw = adapter->fw; @@ -768,21 +841,18 @@ netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname) return -EINVAL; val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]); - major = (__force u32)val & 0xff; - minor = ((__force u32)val >> 8) & 0xff; - build = (__force u32)val >> 16; if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) min_ver = NETXEN_VERSION_CODE(4, 0, 216); else min_ver = NETXEN_VERSION_CODE(3, 4, 216); - ver = NETXEN_VERSION_CODE(major, minor, build); + ver = NETXEN_DECODE_VERSION(val); - if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) { + if ((_major(ver) > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) { dev_err(&pdev->dev, "%s: firmware version %d.%d.%d unsupported\n", - fwname, major, minor, build); + fwname, _major(ver), _minor(ver), _build(ver)); return -EINVAL; } @@ -798,22 +868,21 @@ netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname) if (netxen_rom_fast_read(adapter, NX_FW_VERSION_OFFSET, (int *)&val)) return -EIO; - major = (__force u32)val & 0xff; - minor = ((__force u32)val >> 8) & 0xff; - build = (__force u32)val >> 16; - if (NETXEN_VERSION_CODE(major, minor, build) > ver) + val = NETXEN_DECODE_VERSION(val); + if (val > ver) { + dev_info(&pdev->dev, "%s: firmware is older than flash\n", + fwname); return -EINVAL; + } NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC); return 0; } -static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" }; - void netxen_request_firmware(struct netxen_adapter *adapter) { u32 capability, flashed_ver; - int fw_type; + u8 fw_type; struct pci_dev *pdev = adapter->pdev; int rc = 0; @@ -830,6 +899,8 @@ request_mn: netxen_rom_fast_read(adapter, NX_FW_VERSION_OFFSET, (int *)&flashed_ver); + flashed_ver = NETXEN_DECODE_VERSION(flashed_ver); + if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) { capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY); if (capability & NX_PEG_TUNE_MN_PRESENT) { @@ -838,6 +909,10 @@ request_mn: } } + fw_type = NX_FLASH_ROMIMAGE; + adapter->fw = NULL; + goto done; + request_fw: rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev); if (rc != 0) { @@ -846,6 +921,7 @@ request_fw: goto request_mn; } + fw_type = NX_FLASH_ROMIMAGE; adapter->fw = NULL; goto done; } @@ -859,16 +935,13 @@ request_fw: goto request_mn; } + fw_type = NX_FLASH_ROMIMAGE; adapter->fw = NULL; goto done; } done: - if (adapter->fw) - dev_info(&pdev->dev, "loading firmware from file %s\n", - fw_name[fw_type]); - else - dev_info(&pdev->dev, "loading firmware from flash\n"); + adapter->fw_type = fw_type; } diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 2919a2d..27539dd 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -718,6 +718,10 @@ netxen_start_firmware(struct netxen_adapter *adapter, int request_fw) if (request_fw) netxen_request_firmware(adapter); + err = netxen_need_fw_reset(adapter); + if (err <= 0) + return err; + if (first_boot != 0x55555555) { NXWR32(adapter, CRB_CMDPEG_STATE, 0); netxen_pinit_from_rom(adapter, 0); diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 8c1f698..89f7b2a 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -105,7 +105,7 @@ IVc. Errata static char version[] __devinitdata = KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n" -KERN_INFO " Support available from http://foo.com/bar/baz.html\n"; +" Support available from http://foo.com/bar/baz.html\n"; /* define to 1 to enable PIO instead of MMIO */ #undef USE_IO_OPS diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index f51944b..06618af 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -298,14 +298,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) strcpy(info->node.dev_name, dev->name); - printk(KERN_INFO "%s: port %#3lx, irq %d,", - dev->name, dev->base_addr, dev->irq); - printk (" mmio %#5lx,", (u_long)ti->mmio); - printk (" sram %#5lx,", (u_long)ti->sram_base << 12); - printk ("\n" KERN_INFO " hwaddr="); - for (i = 0; i < TR_ALEN; i++) - printk("%02X", dev->dev_addr[i]); - printk("\n"); + printk(KERN_INFO + "%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n", + dev->name, dev->base_addr, dev->irq, + (u_long)ti->mmio, (u_long)(ti->sram_base << 12), + dev->dev_addr); return 0; cs_failed: diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 02ef63e..36de91b 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -1425,15 +1425,12 @@ static void BuildLAF(int *ladrf, int *adr) ladrf[byte] |= (1 << (hashcode & 7)); #ifdef PCMCIA_DEBUG - if (pc_debug > 2) { - printk(KERN_DEBUG " adr ="); - for (i = 0; i < 6; i++) - printk(" %02X", adr[i]); - printk("\n" KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63]" - " =", hashcode); - for (i = 0; i < 8; i++) - printk(" %02X", ladrf[i]); - printk("\n"); + if (pc_debug > 2) + printk(KERN_DEBUG " adr =%pM\n", adr); + printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode); + for (i = 0; i < 8; i++) + printk(KERN_CONT " %02X", ladrf[i]); + printk(KERN_CONT "\n"); } #endif } /* BuildLAF */ diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 652a368..9ef1c1b 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1727,6 +1727,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50), PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110), PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941), + PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826), PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df), PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0), PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd), diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 1c35e1d..2836815 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -485,7 +485,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev, &new_ring_dma_addr); if (new_tx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Consistent memory allocation failed.\n", dev->name); return; @@ -496,7 +496,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_dma_addr_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_tx_ring; } @@ -505,7 +505,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_skb_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_lists; } @@ -563,7 +563,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, &new_ring_dma_addr); if (new_rx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Consistent memory allocation failed.\n", dev->name); return; @@ -574,7 +574,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_dma_addr_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_rx_ring; } @@ -583,7 +583,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_skb_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_lists; } @@ -1766,38 +1766,38 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) /* Version 0x2623 and 0x2624 */ if (((chip_version + 1) & 0xfffe) == 0x2624) { i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */ - printk("\n" KERN_INFO " tx_start_pt(0x%04x):", i); + printk(KERN_INFO " tx_start_pt(0x%04x):", i); switch (i >> 10) { case 0: - printk(" 20 bytes,"); + printk(KERN_CONT " 20 bytes,"); break; case 1: - printk(" 64 bytes,"); + printk(KERN_CONT " 64 bytes,"); break; case 2: - printk(" 128 bytes,"); + printk(KERN_CONT " 128 bytes,"); break; case 3: - printk("~220 bytes,"); + printk(KERN_CONT "~220 bytes,"); break; } i = a->read_bcr(ioaddr, 18); /* Check Burst/Bus control */ - printk(" BCR18(%x):", i & 0xffff); + printk(KERN_CONT " BCR18(%x):", i & 0xffff); if (i & (1 << 5)) - printk("BurstWrEn "); + printk(KERN_CONT "BurstWrEn "); if (i & (1 << 6)) - printk("BurstRdEn "); + printk(KERN_CONT "BurstRdEn "); if (i & (1 << 7)) - printk("DWordIO "); + printk(KERN_CONT "DWordIO "); if (i & (1 << 11)) - printk("NoUFlow "); + printk(KERN_CONT "NoUFlow "); i = a->read_bcr(ioaddr, 25); - printk("\n" KERN_INFO " SRAMSIZE=0x%04x,", i << 8); + printk(KERN_INFO " SRAMSIZE=0x%04x,", i << 8); i = a->read_bcr(ioaddr, 26); - printk(" SRAM_BND=0x%04x,", i << 8); + printk(KERN_CONT " SRAM_BND=0x%04x,", i << 8); i = a->read_bcr(ioaddr, 27); if (i & (1 << 14)) - printk("LowLatRx"); + printk(KERN_CONT "LowLatRx"); } } @@ -1996,7 +1996,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) &lp->tx_ring_dma_addr); if (lp->tx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Consistent memory allocation failed.\n", name); return -ENOMEM; @@ -2008,7 +2008,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) &lp->rx_ring_dma_addr); if (lp->rx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Consistent memory allocation failed.\n", name); return -ENOMEM; @@ -2018,7 +2018,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->tx_dma_addr) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } @@ -2027,7 +2027,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->rx_dma_addr) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } @@ -2036,7 +2036,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->tx_skbuff) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } @@ -2045,7 +2045,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->rx_skbuff) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 61755cb..eda94fc 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -928,13 +928,32 @@ static void phy_state_machine(struct work_struct *work) * Otherwise, it's 0, and we're * still waiting for AN */ if (err > 0) { - phydev->state = PHY_RUNNING; + err = phy_read_status(phydev); + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else + phydev->state = PHY_NOLINK; + phydev->adjust_link(phydev->attached_dev); } else { phydev->state = PHY_AN; phydev->link_timeout = PHY_AN_TIMEOUT; } - } else - phydev->state = PHY_RUNNING; + } else { + err = phy_read_status(phydev); + if (err) + break; + + if (phydev->link) { + phydev->state = PHY_RUNNING; + netif_carrier_on(phydev->attached_dev); + } else + phydev->state = PHY_NOLINK; + phydev->adjust_link(phydev->attached_dev); + } break; } diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index 156e02e..6ed5317 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -1607,6 +1607,8 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev); int ql_cam_route_initialize(struct ql_adapter *qdev); int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data); int ql_mb_about_fw(struct ql_adapter *qdev); +void ql_link_on(struct ql_adapter *qdev); +void ql_link_off(struct ql_adapter *qdev); #if 1 #define QL_ALL_DUMP diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c index 37c99fe..eb6a9ee 100644 --- a/drivers/net/qlge/qlge_ethtool.c +++ b/drivers/net/qlge/qlge_ethtool.c @@ -59,7 +59,7 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev) cqicb->pkt_delay = cpu_to_le16(qdev->tx_max_coalesced_frames); cqicb->flags = FLAGS_LI; - status = ql_write_cfg(qdev, cqicb, sizeof(cqicb), + status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb), CFG_LCQ, rx_ring->cq_id); if (status) { QPRINTK(qdev, IFUP, ERR, @@ -82,7 +82,7 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev) cqicb->pkt_delay = cpu_to_le16(qdev->rx_max_coalesced_frames); cqicb->flags = FLAGS_LI; - status = ql_write_cfg(qdev, cqicb, sizeof(cqicb), + status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb), CFG_LCQ, rx_ring->cq_id); if (status) { QPRINTK(qdev, IFUP, ERR, diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 90d1f76..5768af1 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -214,6 +214,10 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit, return -ENOMEM; } + status = ql_sem_spinlock(qdev, SEM_ICB_MASK); + if (status) + return status; + status = ql_wait_cfg(qdev, bit); if (status) { QPRINTK(qdev, IFUP, ERR, @@ -221,12 +225,8 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit, goto exit; } - status = ql_sem_spinlock(qdev, SEM_ICB_MASK); - if (status) - goto exit; ql_write32(qdev, ICB_L, (u32) map); ql_write32(qdev, ICB_H, (u32) (map >> 32)); - ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */ mask = CFG_Q_MASK | (bit << 16); value = bit | (q_id << CFG_Q_SHIFT); @@ -237,6 +237,7 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit, */ status = ql_wait_cfg(qdev, bit); exit: + ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */ pci_unmap_single(qdev->pdev, map, size, direction); return status; } @@ -412,6 +413,57 @@ exit: return status; } +/* Set or clear MAC address in hardware. We sometimes + * have to clear it to prevent wrong frame routing + * especially in a bonding environment. + */ +static int ql_set_mac_addr(struct ql_adapter *qdev, int set) +{ + int status; + char zero_mac_addr[ETH_ALEN]; + char *addr; + + if (set) { + addr = &qdev->ndev->dev_addr[0]; + QPRINTK(qdev, IFUP, DEBUG, + "Set Mac addr %02x:%02x:%02x:%02x:%02x:%02x\n", + addr[0], addr[1], addr[2], addr[3], + addr[4], addr[5]); + } else { + memset(zero_mac_addr, 0, ETH_ALEN); + addr = &zero_mac_addr[0]; + QPRINTK(qdev, IFUP, DEBUG, + "Clearing MAC address on %s\n", + qdev->ndev->name); + } + status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); + if (status) + return status; + status = ql_set_mac_addr_reg(qdev, (u8 *) addr, + MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ); + ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); + if (status) + QPRINTK(qdev, IFUP, ERR, "Failed to init mac " + "address.\n"); + return status; +} + +void ql_link_on(struct ql_adapter *qdev) +{ + QPRINTK(qdev, LINK, ERR, "%s: Link is up.\n", + qdev->ndev->name); + netif_carrier_on(qdev->ndev); + ql_set_mac_addr(qdev, 1); +} + +void ql_link_off(struct ql_adapter *qdev) +{ + QPRINTK(qdev, LINK, ERR, "%s: Link is down.\n", + qdev->ndev->name); + netif_carrier_off(qdev->ndev); + ql_set_mac_addr(qdev, 0); +} + /* Get a specific frame routing value from the CAM. * Used for debug and reg dump. */ @@ -1628,7 +1680,7 @@ static void ql_process_mac_tx_intr(struct ql_adapter *qdev, tx_ring = &qdev->tx_ring[mac_rsp->txq_idx]; tx_ring_desc = &tx_ring->q[mac_rsp->tid]; ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt); - qdev->stats.tx_bytes += tx_ring_desc->map_cnt; + qdev->stats.tx_bytes += (tx_ring_desc->skb)->len; qdev->stats.tx_packets++; dev_kfree_skb(tx_ring_desc->skb); tx_ring_desc->skb = NULL; @@ -1660,13 +1712,13 @@ static void ql_process_mac_tx_intr(struct ql_adapter *qdev, /* Fire up a handler to reset the MPI processor. */ void ql_queue_fw_error(struct ql_adapter *qdev) { - netif_carrier_off(qdev->ndev); + ql_link_off(qdev); queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0); } void ql_queue_asic_error(struct ql_adapter *qdev) { - netif_carrier_off(qdev->ndev); + ql_link_off(qdev); ql_disable_interrupts(qdev); /* Clear adapter up bit to signal the recovery * process that it shouldn't kill the reset worker @@ -2104,7 +2156,7 @@ static int qlge_send(struct sk_buff *skb, struct net_device *ndev) } tx_ring_desc = &tx_ring->q[tx_ring->prod_idx]; mac_iocb_ptr = tx_ring_desc->queue_entry; - memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr)); + memset((void *)mac_iocb_ptr, 0, sizeof(*mac_iocb_ptr)); mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB; mac_iocb_ptr->tid = tx_ring_desc->index; @@ -2743,7 +2795,7 @@ static int ql_start_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring) ql_init_tx_ring(qdev, tx_ring); - err = ql_write_cfg(qdev, wqicb, sizeof(wqicb), CFG_LRQ, + err = ql_write_cfg(qdev, wqicb, sizeof(*wqicb), CFG_LRQ, (u16) tx_ring->wq_id); if (err) { QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n"); @@ -3008,7 +3060,7 @@ static int ql_start_rss(struct ql_adapter *qdev) int i; u8 *hash_id = (u8 *) ricb->hash_cq_id; - memset((void *)ricb, 0, sizeof(ricb)); + memset((void *)ricb, 0, sizeof(*ricb)); ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K; ricb->flags = @@ -3030,7 +3082,7 @@ static int ql_start_rss(struct ql_adapter *qdev) QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n"); - status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0); + status = ql_write_cfg(qdev, ricb, sizeof(*ricb), CFG_LR, 0); if (status) { QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n"); return status; @@ -3039,25 +3091,40 @@ static int ql_start_rss(struct ql_adapter *qdev) return status; } -/* Initialize the frame-to-queue routing. */ -static int ql_route_initialize(struct ql_adapter *qdev) +static int ql_clear_routing_entries(struct ql_adapter *qdev) { - int status = 0; - int i; + int i, status = 0; status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); if (status) return status; - /* Clear all the entries in the routing table. */ for (i = 0; i < 16; i++) { status = ql_set_routing_reg(qdev, i, 0, 0); if (status) { QPRINTK(qdev, IFUP, ERR, - "Failed to init routing register for CAM packets.\n"); - goto exit; + "Failed to init routing register for CAM " + "packets.\n"); + break; } } + ql_sem_unlock(qdev, SEM_RT_IDX_MASK); + return status; +} + +/* Initialize the frame-to-queue routing. */ +static int ql_route_initialize(struct ql_adapter *qdev) +{ + int status = 0; + + status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); + if (status) + return status; + + /* Clear all the entries in the routing table. */ + status = ql_clear_routing_entries(qdev); + if (status) + goto exit; status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1); if (status) { @@ -3096,14 +3163,15 @@ exit: int ql_cam_route_initialize(struct ql_adapter *qdev) { - int status; + int status, set; - status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); - if (status) - return status; - status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr, - MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ); - ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); + /* If check if the link is up and use to + * determine if we are setting or clearing + * the MAC address in the CAM. + */ + set = ql_read32(qdev, STS); + set &= qdev->port_link_up; + status = ql_set_mac_addr(qdev, set); if (status) { QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n"); return status; @@ -3210,9 +3278,17 @@ static int ql_adapter_reset(struct ql_adapter *qdev) { u32 value; int status = 0; - unsigned long end_jiffies = jiffies + - max((unsigned long)1, usecs_to_jiffies(30)); + unsigned long end_jiffies; + /* Clear all the entries in the routing table. */ + status = ql_clear_routing_entries(qdev); + if (status) { + QPRINTK(qdev, IFUP, ERR, "Failed to clear routing bits.\n"); + return status; + } + + end_jiffies = jiffies + + max((unsigned long)1, usecs_to_jiffies(30)); ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR); do { @@ -3252,7 +3328,7 @@ static int ql_adapter_down(struct ql_adapter *qdev) int i, status = 0; struct rx_ring *rx_ring; - netif_carrier_off(qdev->ndev); + ql_link_off(qdev); /* Don't kill the reset worker thread if we * are in the process of recovery. @@ -3319,8 +3395,12 @@ static int ql_adapter_up(struct ql_adapter *qdev) } set_bit(QL_ADAPTER_UP, &qdev->flags); ql_alloc_rx_buffers(qdev); - if ((ql_read32(qdev, STS) & qdev->port_init)) - netif_carrier_on(qdev->ndev); + /* If the port is initialized and the + * link is up the turn on the carrier. + */ + if ((ql_read32(qdev, STS) & qdev->port_init) && + (ql_read32(qdev, STS) & qdev->port_link_up)) + ql_link_on(qdev); ql_enable_interrupts(qdev); ql_enable_all_completion_interrupts(qdev); netif_tx_start_all_queues(qdev->ndev); @@ -3346,11 +3426,6 @@ static int ql_get_adapter_resources(struct ql_adapter *qdev) return -ENOMEM; } status = ql_request_irq(qdev); - if (status) - goto err_irq; - return status; -err_irq: - ql_free_mem_resources(qdev); return status; } @@ -3414,7 +3489,7 @@ static int ql_configure_rings(struct ql_adapter *qdev) for (i = 0; i < qdev->tx_ring_count; i++) { tx_ring = &qdev->tx_ring[i]; - memset((void *)tx_ring, 0, sizeof(tx_ring)); + memset((void *)tx_ring, 0, sizeof(*tx_ring)); tx_ring->qdev = qdev; tx_ring->wq_id = i; tx_ring->wq_len = qdev->tx_ring_size; @@ -3430,7 +3505,7 @@ static int ql_configure_rings(struct ql_adapter *qdev) for (i = 0; i < qdev->rx_ring_count; i++) { rx_ring = &qdev->rx_ring[i]; - memset((void *)rx_ring, 0, sizeof(rx_ring)); + memset((void *)rx_ring, 0, sizeof(*rx_ring)); rx_ring->qdev = qdev; rx_ring->cq_id = i; rx_ring->cpu = i % cpu_cnt; /* CPU to run handler on. */ @@ -3789,7 +3864,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev, int pos, err = 0; u16 val16; - memset((void *)qdev, 0, sizeof(qdev)); + memset((void *)qdev, 0, sizeof(*qdev)); err = pci_enable_device(pdev); if (err) { dev_err(&pdev->dev, "PCI device enable failed.\n"); @@ -3976,7 +4051,7 @@ static int __devinit qlge_probe(struct pci_dev *pdev, pci_disable_device(pdev); return err; } - netif_carrier_off(ndev); + ql_link_off(qdev); ql_display_dev_info(ndev); cards_found++; return 0; diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index 71afbf8..6685bd9 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -238,7 +238,7 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp) &qdev->mpi_port_cfg_work, 0); } - netif_carrier_on(qdev->ndev); + ql_link_on(qdev); } static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp) @@ -251,7 +251,7 @@ static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp) if (status) QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n"); - netif_carrier_off(qdev->ndev); + ql_link_off(qdev); } static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp) @@ -849,7 +849,7 @@ void ql_mpi_idc_work(struct work_struct *work) case MB_CMD_PORT_RESET: case MB_CMD_SET_PORT_CFG: case MB_CMD_STOP_FW: - netif_carrier_off(qdev->ndev); + ql_link_off(qdev); /* Signal the resulting link up AEN * that the frame routing and mac addr * needs to be set. diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index ed63d23..961b539 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -49,8 +49,8 @@ #include <asm/processor.h> #define DRV_NAME "r6040" -#define DRV_VERSION "0.23" -#define DRV_RELDATE "05May2009" +#define DRV_VERSION "0.24" +#define DRV_RELDATE "08Jul2009" /* PHY CHIP Address */ #define PHY1_ADDR 1 /* For MAC1 */ @@ -704,8 +704,11 @@ static irqreturn_t r6040_interrupt(int irq, void *dev_id) /* Read MISR status and clear */ status = ioread16(ioaddr + MISR); - if (status == 0x0000 || status == 0xffff) + if (status == 0x0000 || status == 0xffff) { + /* Restore RDC MAC interrupt */ + iowrite16(misr, ioaddr + MIER); return IRQ_NONE; + } /* RX interrupt request */ if (status & RX_INTS) { diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 341882f..a2d82dd 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -865,8 +865,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_cpu_data *cd = mdp->cd; irqreturn_t ret = IRQ_NONE; - u32 ioaddr, boguscnt = RX_RING_SIZE; - u32 intr_status = 0; + u32 ioaddr, intr_status = 0; ioaddr = ndev->base_addr; spin_lock(&mdp->lock); @@ -901,12 +900,6 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) if (intr_status & cd->eesr_err_check) sh_eth_error(ndev, intr_status); - if (--boguscnt < 0) { - printk(KERN_WARNING - "%s: Too much work at interrupt, status=0x%4.4x.\n", - ndev->name, intr_status); - } - other_irq: spin_unlock(&mdp->lock); diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 7681d28..daf961a 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2495,7 +2495,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) if (likely(status >> 16 == (status & 0xffff))) { skb = sky2->rx_ring[sky2->rx_next].skb; skb->ip_summed = CHECKSUM_COMPLETE; - skb->csum = status & 0xffff; + skb->csum = le16_to_cpu(status); } else { printk(KERN_NOTICE PFX "%s: hardware receive " "checksum problem (status = %#x)\n", diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index b60639b..66067f9 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -1938,7 +1938,7 @@ static int __devexit smsc911x_drv_remove(struct platform_device *pdev) if (!res) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start); + release_mem_region(res->start, resource_size(res)); iounmap(pdata->ioaddr); @@ -1976,7 +1976,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) retval = -ENODEV; goto out_0; } - res_size = res->end - res->start + 1; + res_size = resource_size(res); irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq_res) { @@ -2104,7 +2104,7 @@ out_unmap_io_3: out_free_netdev_2: free_netdev(dev); out_release_io_1: - release_mem_region(res->start, res->end - res->start); + release_mem_region(res->start, resource_size(res)); out_0: return retval; } diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 838cce8..669253c 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -180,7 +180,7 @@ static int full_duplex[MAX_UNITS] = {0, }; /* These identify the driver base version and may not be removed. */ static const char version[] __devinitconst = KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>\n" -KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n"; +" (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver"); diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 545f81b..d1521c3 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -1698,13 +1698,13 @@ static int netdev_close(struct net_device *dev) #ifdef __i386__ if (netif_msg_hw(np)) { - printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n", + printk(KERN_DEBUG " Tx ring at %8.8x:\n", (int)(np->tx_ring_dma)); for (i = 0; i < TX_RING_SIZE; i++) - printk(" #%d desc. %4.4x %8.8x %8.8x.\n", + printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n", i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr, np->tx_ring[i].frag[0].length); - printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + printk(KERN_DEBUG " Rx ring %8.8x:\n", (int)(np->rx_ring_dma)); for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) { printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 0f78f99..7030bd5 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -1132,7 +1132,9 @@ static int tsi108_get_mac(struct net_device *dev) } if (!is_valid_ether_addr(dev->dev_addr)) { - printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2); + printk(KERN_ERR + "%s: Invalid MAC address. word1: %08x, word2: %08x\n", + dev->name, word1, word2); return -EINVAL; } @@ -1201,8 +1203,8 @@ static void tsi108_set_rx_mode(struct net_device *dev) __set_bit(hash, &data->mc_hash[0]); } else { printk(KERN_ERR - "%s: got multicast address of length %d " - "instead of 6.\n", dev->name, + "%s: got multicast address of length %d instead of 6.\n", + dev->name, mc->dmi_addrlen); } diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 81f054d..ef49744 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -944,9 +944,10 @@ static void de_set_media (struct de_private *de) macmode &= ~FullDuplex; if (netif_msg_link(de)) { - printk(KERN_INFO "%s: set link %s\n" - KERN_INFO "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n" - KERN_INFO "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n", + printk(KERN_INFO + "%s: set link %s\n" + "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n" + "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n", de->dev->name, media_name[media], de->dev->name, dr32(MacMode), dr32(SIAStatus), dr32(CSR13), dr32(CSR14), dr32(CSR15), diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 2abb5d3..99a6364 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -570,16 +570,18 @@ static void tulip_tx_timeout(struct net_device *dev) (unsigned int)tp->rx_ring[i].buffer2, buf[0], buf[1], buf[2]); for (j = 0; buf[j] != 0xee && j < 1600; j++) - if (j < 100) printk(" %2.2x", buf[j]); - printk(" j=%d.\n", j); + if (j < 100) + printk(KERN_CONT " %2.2x", buf[j]); + printk(KERN_CONT " j=%d.\n", j); } printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)tp->rx_ring[i].status); - printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring); + printk(KERN_CONT " %8.8x", + (unsigned int)tp->rx_ring[i].status); + printk(KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)tp->tx_ring[i].status); - printk("\n"); + printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status); + printk(KERN_CONT "\n"); } #endif diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index 842b1a2c..0f15773 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -142,7 +142,7 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; static const char version[] __initconst = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n" - KERN_INFO " http://www.scyld.com/network/drivers.html\n"; + " http://www.scyld.com/network/drivers.html\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver"); @@ -939,7 +939,7 @@ static void tx_timeout(struct net_device *dev) printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) printk(" %8.8x", (unsigned int)np->rx_ring[i].status); - printk("\n"KERN_DEBUG" Tx ring %p: ", np->tx_ring); + printk(KERN_DEBUG" Tx ring %p: ", np->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) printk(" %8.8x", np->tx_ring[i].status); printk("\n"); @@ -1520,7 +1520,7 @@ static int netdev_close(struct net_device *dev) printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n", i, np->tx_ring[i].length, np->tx_ring[i].status, np->tx_ring[i].buffer1); - printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + printk(KERN_DEBUG " Rx ring %8.8x:\n", (int)np->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) { printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 11a0ba4..027f7ab 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -486,12 +486,14 @@ static unsigned int tun_chr_poll(struct file *file, poll_table * wait) { struct tun_file *tfile = file->private_data; struct tun_struct *tun = __tun_get(tfile); - struct sock *sk = tun->sk; + struct sock *sk; unsigned int mask = 0; if (!tun) return POLLERR; + sk = tun->sk; + DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name); poll_wait(file, &tun->socket.wait, wait); @@ -1324,20 +1326,22 @@ static int tun_chr_close(struct inode *inode, struct file *file) struct tun_file *tfile = file->private_data; struct tun_struct *tun; - - rtnl_lock(); tun = __tun_get(tfile); if (tun) { - DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name); + struct net_device *dev = tun->dev; + + DBG(KERN_INFO "%s: tun_chr_close\n", dev->name); __tun_detach(tun); /* If desireable, unregister the netdevice. */ - if (!(tun->flags & TUN_PERSIST)) - unregister_netdevice(tun->dev); - + if (!(tun->flags & TUN_PERSIST)) { + rtnl_lock(); + if (dev->reg_state == NETREG_REGISTERED) + unregister_netdevice(dev); + rtnl_unlock(); + } } - rtnl_unlock(); tun = tfile->tun; if (tun) diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c index 80e0177..cd35d50 100644 --- a/drivers/net/usb/cdc_eem.c +++ b/drivers/net/usb/cdc_eem.c @@ -319,7 +319,7 @@ static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb) return crc == crc2; if (unlikely(crc != crc2)) { - dev->stats.rx_errors++; + dev->net->stats.rx_errors++; dev_kfree_skb_any(skb2); } else usbnet_skb_return(dev, skb2); diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 7ae8244..1d3730d 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -513,11 +513,11 @@ static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb) len = (skb->data[1] | (skb->data[2] << 8)) - 4; if (unlikely(status & 0xbf)) { - if (status & 0x01) dev->stats.rx_fifo_errors++; - if (status & 0x02) dev->stats.rx_crc_errors++; - if (status & 0x04) dev->stats.rx_frame_errors++; - if (status & 0x20) dev->stats.rx_missed_errors++; - if (status & 0x90) dev->stats.rx_length_errors++; + if (status & 0x01) dev->net->stats.rx_fifo_errors++; + if (status & 0x02) dev->net->stats.rx_crc_errors++; + if (status & 0x04) dev->net->stats.rx_frame_errors++; + if (status & 0x20) dev->net->stats.rx_missed_errors++; + if (status & 0x90) dev->net->stats.rx_length_errors++; return 0; } diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c index 034e8a7..aeb1ab0 100644 --- a/drivers/net/usb/net1080.c +++ b/drivers/net/usb/net1080.c @@ -433,7 +433,7 @@ static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb) dbg("rx framesize %d range %d..%d mtu %d", skb->len, net->hard_header_len, dev->hard_mtu, net->mtu); #endif - dev->stats.rx_frame_errors++; + dev->net->stats.rx_frame_errors++; nc_ensure_sync(dev); return 0; } @@ -442,12 +442,12 @@ static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb) hdr_len = le16_to_cpup(&header->hdr_len); packet_len = le16_to_cpup(&header->packet_len); if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) { - dev->stats.rx_frame_errors++; + dev->net->stats.rx_frame_errors++; dbg("packet too big, %d", packet_len); nc_ensure_sync(dev); return 0; } else if (hdr_len < MIN_HEADER) { - dev->stats.rx_frame_errors++; + dev->net->stats.rx_frame_errors++; dbg("header too short, %d", hdr_len); nc_ensure_sync(dev); return 0; @@ -465,21 +465,21 @@ static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb) if ((packet_len & 0x01) == 0) { if (skb->data [packet_len] != PAD_BYTE) { - dev->stats.rx_frame_errors++; + dev->net->stats.rx_frame_errors++; dbg("bad pad"); return 0; } skb_trim(skb, skb->len - 1); } if (skb->len != packet_len) { - dev->stats.rx_frame_errors++; + dev->net->stats.rx_frame_errors++; dbg("bad packet len %d (expected %d)", skb->len, packet_len); nc_ensure_sync(dev); return 0; } if (header->packet_id != get_unaligned(&trailer->packet_id)) { - dev->stats.rx_fifo_errors++; + dev->net->stats.rx_fifo_errors++; dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x", le16_to_cpu(header->packet_id), le16_to_cpu(trailer->packet_id)); diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 1bf243e..2232232 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -487,7 +487,7 @@ int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb) if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET || skb->len < msg_len || (data_offset + data_len + 8) > msg_len)) { - dev->stats.rx_frame_errors++; + dev->net->stats.rx_frame_errors++; devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d", le32_to_cpu(hdr->msg_type), msg_len, data_offset, data_len, skb->len); diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 89a91f8..fe04589 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1108,18 +1108,18 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) if (unlikely(header & RX_STS_ES_)) { if (netif_msg_rx_err(dev)) devdbg(dev, "Error header=0x%08x", header); - dev->stats.rx_errors++; - dev->stats.rx_dropped++; + dev->net->stats.rx_errors++; + dev->net->stats.rx_dropped++; if (header & RX_STS_CRC_) { - dev->stats.rx_crc_errors++; + dev->net->stats.rx_crc_errors++; } else { if (header & (RX_STS_TL_ | RX_STS_RF_)) - dev->stats.rx_frame_errors++; + dev->net->stats.rx_frame_errors++; if ((header & RX_STS_LE_) && (!(header & RX_STS_FT_))) - dev->stats.rx_length_errors++; + dev->net->stats.rx_length_errors++; } } else { /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */ diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 22c0585..edfd9e1 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -234,8 +234,8 @@ void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb) int status; skb->protocol = eth_type_trans (skb, dev->net); - dev->stats.rx_packets++; - dev->stats.rx_bytes += skb->len; + dev->net->stats.rx_packets++; + dev->net->stats.rx_bytes += skb->len; if (netif_msg_rx_status (dev)) devdbg (dev, "< rx, len %zu, type 0x%x", @@ -397,7 +397,7 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb) if (netif_msg_rx_err (dev)) devdbg (dev, "drop"); error: - dev->stats.rx_errors++; + dev->net->stats.rx_errors++; skb_queue_tail (&dev->done, skb); } } @@ -420,8 +420,8 @@ static void rx_complete (struct urb *urb) case 0: if (skb->len < dev->net->hard_header_len) { entry->state = rx_cleanup; - dev->stats.rx_errors++; - dev->stats.rx_length_errors++; + dev->net->stats.rx_errors++; + dev->net->stats.rx_length_errors++; if (netif_msg_rx_err (dev)) devdbg (dev, "rx length %d", skb->len); } @@ -433,7 +433,7 @@ static void rx_complete (struct urb *urb) * storm, recovering as needed. */ case -EPIPE: - dev->stats.rx_errors++; + dev->net->stats.rx_errors++; usbnet_defer_kevent (dev, EVENT_RX_HALT); // FALLTHROUGH @@ -451,7 +451,7 @@ static void rx_complete (struct urb *urb) case -EPROTO: case -ETIME: case -EILSEQ: - dev->stats.rx_errors++; + dev->net->stats.rx_errors++; if (!timer_pending (&dev->delay)) { mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES); if (netif_msg_link (dev)) @@ -465,12 +465,12 @@ block: /* data overrun ... flush fifo? */ case -EOVERFLOW: - dev->stats.rx_over_errors++; + dev->net->stats.rx_over_errors++; // FALLTHROUGH default: entry->state = rx_cleanup; - dev->stats.rx_errors++; + dev->net->stats.rx_errors++; if (netif_msg_rx_err (dev)) devdbg (dev, "rx status %d", urb_status); break; @@ -583,8 +583,8 @@ int usbnet_stop (struct net_device *net) if (netif_msg_ifdown (dev)) devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld", - dev->stats.rx_packets, dev->stats.tx_packets, - dev->stats.rx_errors, dev->stats.tx_errors + net->stats.rx_packets, net->stats.tx_packets, + net->stats.rx_errors, net->stats.tx_errors ); // ensure there are no more active urbs @@ -891,10 +891,10 @@ static void tx_complete (struct urb *urb) struct usbnet *dev = entry->dev; if (urb->status == 0) { - dev->stats.tx_packets++; - dev->stats.tx_bytes += entry->length; + dev->net->stats.tx_packets++; + dev->net->stats.tx_bytes += entry->length; } else { - dev->stats.tx_errors++; + dev->net->stats.tx_errors++; switch (urb->status) { case -EPIPE: @@ -1020,7 +1020,7 @@ int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net) devdbg (dev, "drop, code %d", retval); drop: retval = NET_XMIT_SUCCESS; - dev->stats.tx_dropped++; + dev->net->stats.tx_dropped++; if (skb) dev_kfree_skb_any (skb); usb_free_urb (urb); diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 87197dd..1097c72 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -208,11 +208,14 @@ rx_drop: static struct net_device_stats *veth_get_stats(struct net_device *dev) { - struct veth_priv *priv = netdev_priv(dev); - struct net_device_stats *dev_stats = &dev->stats; - unsigned int cpu; + struct veth_priv *priv; + struct net_device_stats *dev_stats; + int cpu; struct veth_net_stats *stats; + priv = netdev_priv(dev); + dev_stats = &dev->stats; + dev_stats->rx_packets = 0; dev_stats->tx_packets = 0; dev_stats->rx_bytes = 0; @@ -220,17 +223,16 @@ static struct net_device_stats *veth_get_stats(struct net_device *dev) dev_stats->tx_dropped = 0; dev_stats->rx_dropped = 0; - if (priv->stats) - for_each_online_cpu(cpu) { - stats = per_cpu_ptr(priv->stats, cpu); + for_each_online_cpu(cpu) { + stats = per_cpu_ptr(priv->stats, cpu); - dev_stats->rx_packets += stats->rx_packets; - dev_stats->tx_packets += stats->tx_packets; - dev_stats->rx_bytes += stats->rx_bytes; - dev_stats->tx_bytes += stats->tx_bytes; - dev_stats->tx_dropped += stats->tx_dropped; - dev_stats->rx_dropped += stats->rx_dropped; - } + dev_stats->rx_packets += stats->rx_packets; + dev_stats->tx_packets += stats->tx_packets; + dev_stats->rx_bytes += stats->rx_bytes; + dev_stats->tx_bytes += stats->tx_bytes; + dev_stats->tx_dropped += stats->tx_dropped; + dev_stats->rx_dropped += stats->rx_dropped; + } return dev_stats; } @@ -257,8 +259,6 @@ static int veth_close(struct net_device *dev) netif_carrier_off(dev); netif_carrier_off(priv->peer); - free_percpu(priv->stats); - priv->stats = NULL; return 0; } @@ -289,6 +289,15 @@ static int veth_dev_init(struct net_device *dev) return 0; } +static void veth_dev_free(struct net_device *dev) +{ + struct veth_priv *priv; + + priv = netdev_priv(dev); + free_percpu(priv->stats); + free_netdev(dev); +} + static const struct net_device_ops veth_netdev_ops = { .ndo_init = veth_dev_init, .ndo_open = veth_open, @@ -306,7 +315,7 @@ static void veth_setup(struct net_device *dev) dev->netdev_ops = &veth_netdev_ops; dev->ethtool_ops = &veth_ethtool_ops; dev->features |= NETIF_F_LLTX; - dev->destructor = free_netdev; + dev->destructor = veth_dev_free; } /* diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c index 223238d..1ea1ef6 100644 --- a/drivers/net/wan/hd64570.c +++ b/drivers/net/wan/hd64570.c @@ -584,8 +584,9 @@ static void sca_dump_rings(struct net_device *dev) sca_in(DSR_RX(phy_node(port)), card) & DSR_DE ? "" : "in"); for (cnt = 0; cnt < port_to_card(port)->rx_ring_buffers; cnt++) printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat))); + printk(KERN_CONT "\n"); - printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " + printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " "last=%u %sactive", sca_inw(get_dmac_tx(port) + CDAL, card), sca_inw(get_dmac_tx(port) + EDAL, card), diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c index 497b003..f099c34 100644 --- a/drivers/net/wan/hd64572.c +++ b/drivers/net/wan/hd64572.c @@ -529,8 +529,9 @@ static void sca_dump_rings(struct net_device *dev) sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in"); for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++) printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat))); + printk(KERN_CONT "\n"); - printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " + printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " "last=%u %sactive", sca_inl(get_dmac_tx(port) + CDAL, card), sca_inl(get_dmac_tx(port) + EDAL, card), diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index 3fb9dbc..d14e95a 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -326,11 +326,9 @@ sbni_pci_probe( struct net_device *dev ) } if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs) - printk( KERN_WARNING " WARNING: The PCI BIOS assigned " - "this PCI card to IRQ %d, which is unlikely " - "to work!.\n" - KERN_WARNING " You should use the PCI BIOS " - "setup to assign a valid IRQ line.\n", + printk( KERN_WARNING + " WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n" + " You should use the PCI BIOS setup to assign a valid IRQ line.\n", pci_irq_line ); /* avoiding re-enable dual adapters */ diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig index d26e7b4..eb0337c 100644 --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig @@ -1,5 +1,6 @@ config ATH_COMMON tristate "Atheros Wireless Cards" + depends on WLAN_80211 depends on ATH5K || ATH9K || AR9170_USB source "drivers/net/wireless/ath/ath5k/Kconfig" diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index b61a071..4ccf48e 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -355,7 +355,14 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, } if (bf_next == NULL) { - INIT_LIST_HEAD(&bf_head); + /* + * Make sure the last desc is reclaimed if it + * not a holding desc. + */ + if (!bf_last->bf_stale) + list_move_tail(&bf->list, &bf_head); + else + INIT_LIST_HEAD(&bf_head); } else { ASSERT(!list_empty(bf_q)); list_move_tail(&bf->list, &bf_head); diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index f580c28..4044806 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -648,6 +648,7 @@ struct b43_wl { u8 nr_devs; bool radiotap_enabled; + bool radio_enabled; /* The beacon we are currently using (AP or IBSS mode). * This beacon stuff is protected by the irq_lock. */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 6456afe..e71c8d9 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3497,8 +3497,8 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed) if (phy->ops->set_rx_antenna) phy->ops->set_rx_antenna(dev, antenna); - if (!!conf->radio_enabled != phy->radio_on) { - if (conf->radio_enabled) { + if (wl->radio_enabled != phy->radio_on) { + if (wl->radio_enabled) { b43_software_rfkill(dev, false); b43info(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) { @@ -4339,6 +4339,7 @@ static int b43_op_start(struct ieee80211_hw *hw) wl->beacon0_uploaded = 0; wl->beacon1_uploaded = 0; wl->beacon_templates_virgin = 1; + wl->radio_enabled = 1; mutex_lock(&wl->mutex); @@ -4378,6 +4379,7 @@ static void b43_op_stop(struct ieee80211_hw *hw) if (b43_status(dev) >= B43_STAT_STARTED) b43_wireless_core_stop(dev); b43_wireless_core_exit(dev); + wl->radio_enabled = 0; mutex_unlock(&wl->mutex); cancel_work_sync(&(wl->txpower_adjust_work)); @@ -4560,6 +4562,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) B43_WARN_ON(1); dev->phy.gmode = have_2ghz_phy; + dev->phy.radio_on = 1; tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; b43_wireless_core_reset(dev, tmp); diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 3cfc303..6c3a749 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -35,6 +35,7 @@ static /*const */ struct pcmcia_device_id b43_pcmcia_tbl[] = { PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448), + PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476), PCMCIA_DEVICE_NULL, }; diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h index 77fda14..038baa8 100644 --- a/drivers/net/wireless/b43legacy/b43legacy.h +++ b/drivers/net/wireless/b43legacy/b43legacy.h @@ -607,6 +607,7 @@ struct b43legacy_wl { u8 nr_devs; bool radiotap_enabled; + bool radio_enabled; /* The beacon we are currently using (AP or IBSS mode). * This beacon stuff is protected by the irq_lock. */ diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index e5136fb..c4973c1 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2689,8 +2689,8 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw, /* Antennas for RX and management frame TX. */ b43legacy_mgmtframe_txantenna(dev, antenna_tx); - if (!!conf->radio_enabled != phy->radio_on) { - if (conf->radio_enabled) { + if (wl->radio_enabled != phy->radio_on) { + if (wl->radio_enabled) { b43legacy_radio_turn_on(dev); b43legacyinfo(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) @@ -3441,6 +3441,7 @@ static int b43legacy_op_start(struct ieee80211_hw *hw) wl->beacon0_uploaded = 0; wl->beacon1_uploaded = 0; wl->beacon_templates_virgin = 1; + wl->radio_enabled = 1; mutex_lock(&wl->mutex); @@ -3479,6 +3480,7 @@ static void b43legacy_op_stop(struct ieee80211_hw *hw) if (b43legacy_status(dev) >= B43legacy_STAT_STARTED) b43legacy_wireless_core_stop(dev); b43legacy_wireless_core_exit(dev); + wl->radio_enabled = 0; mutex_unlock(&wl->mutex); } @@ -3620,6 +3622,7 @@ static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev) have_bphy = 1; dev->phy.gmode = (have_gphy || have_bphy); + dev->phy.radio_on = 1; tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0; b43legacy_wireless_core_reset(dev, tmp); diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig index 1eccb6d..030401d 100644 --- a/drivers/net/wireless/iwmc3200wifi/Kconfig +++ b/drivers/net/wireless/iwmc3200wifi/Kconfig @@ -4,6 +4,15 @@ config IWM depends on CFG80211 select WIRELESS_EXT select FW_LOADER + help + The Intel Wireless Multicomm 3200 hardware is a combo + card with GPS, Bluetooth, WiMax and 802.11 radios. It + runs over SDIO and is typically found on Moorestown + based platform. This driver takes care of the 802.11 + part, which is a fullmac one. + + If you choose to build it as a module, it'll be called + iwmc3200wifi.ko. config IWM_DEBUG bool "Enable full debugging output in iwmc3200wifi" diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index e789c6e..a111bda 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -418,6 +418,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, continue; if (!data2->started || !hwsim_ps_rx_ok(data2, skb) || + !data->channel || !data2->channel || data->channel->center_freq != data2->channel->center_freq || !(data->group & data2->group)) continue; diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index b618bd1..22ca122 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -823,30 +823,30 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb) struct p54_tx_info *range; unsigned long flags; - if (unlikely(!skb || !dev || skb_queue_empty(&priv->tx_queue))) + if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue))) return; - /* There used to be a check here to see if the SKB was on the - * TX queue or not. This can never happen because all SKBs we - * see here successfully went through p54_assign_address() - * which means the SKB is on the ->tx_queue. + /* + * don't try to free an already unlinked skb */ + if (unlikely((!skb->next) || (!skb->prev))) + return; spin_lock_irqsave(&priv->tx_queue.lock, flags); info = IEEE80211_SKB_CB(skb); range = (void *)info->rate_driver_data; - if (!skb_queue_is_first(&priv->tx_queue, skb)) { + if (skb->prev != (struct sk_buff *)&priv->tx_queue) { struct ieee80211_tx_info *ni; struct p54_tx_info *mr; - ni = IEEE80211_SKB_CB(skb_queue_prev(&priv->tx_queue, skb)); + ni = IEEE80211_SKB_CB(skb->prev); mr = (struct p54_tx_info *)ni->rate_driver_data; } - if (!skb_queue_is_last(&priv->tx_queue, skb)) { + if (skb->next != (struct sk_buff *)&priv->tx_queue) { struct ieee80211_tx_info *ni; struct p54_tx_info *mr; - ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue, skb)); + ni = IEEE80211_SKB_CB(skb->next); mr = (struct p54_tx_info *)ni->rate_driver_data; } __skb_unlink(skb, &priv->tx_queue); @@ -864,13 +864,15 @@ static struct sk_buff *p54_find_tx_entry(struct ieee80211_hw *dev, unsigned long flags; spin_lock_irqsave(&priv->tx_queue.lock, flags); - skb_queue_walk(&priv->tx_queue, entry) { + entry = priv->tx_queue.next; + while (entry != (struct sk_buff *)&priv->tx_queue) { struct p54_hdr *hdr = (struct p54_hdr *) entry->data; if (hdr->req_id == req_id) { spin_unlock_irqrestore(&priv->tx_queue.lock, flags); return entry; } + entry = entry->next; } spin_unlock_irqrestore(&priv->tx_queue.lock, flags); return NULL; @@ -888,33 +890,36 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) int count, idx; spin_lock_irqsave(&priv->tx_queue.lock, flags); - skb_queue_walk(&priv->tx_queue, entry) { + entry = (struct sk_buff *) priv->tx_queue.next; + while (entry != (struct sk_buff *)&priv->tx_queue) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); struct p54_hdr *entry_hdr; struct p54_tx_data *entry_data; unsigned int pad = 0, frame_len; range = (void *)info->rate_driver_data; - if (range->start_addr != addr) + if (range->start_addr != addr) { + entry = entry->next; continue; + } - if (!skb_queue_is_last(&priv->tx_queue, entry)) { + if (entry->next != (struct sk_buff *)&priv->tx_queue) { struct ieee80211_tx_info *ni; struct p54_tx_info *mr; - ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue, - entry)); + ni = IEEE80211_SKB_CB(entry->next); mr = (struct p54_tx_info *)ni->rate_driver_data; } __skb_unlink(entry, &priv->tx_queue); - spin_unlock_irqrestore(&priv->tx_queue.lock, flags); frame_len = entry->len; entry_hdr = (struct p54_hdr *) entry->data; entry_data = (struct p54_tx_data *) entry_hdr->data; - priv->tx_stats[entry_data->hw_queue].len--; + if (priv->tx_stats[entry_data->hw_queue].len) + priv->tx_stats[entry_data->hw_queue].len--; priv->stats.dot11ACKFailureCount += payload->tries - 1; + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); /* * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are @@ -1164,21 +1169,23 @@ static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, } } - skb_queue_walk(&priv->tx_queue, entry) { + entry = priv->tx_queue.next; + while (left--) { u32 hole_size; info = IEEE80211_SKB_CB(entry); range = (void *)info->rate_driver_data; hole_size = range->start_addr - last_addr; if (!target_skb && hole_size >= len) { - target_skb = skb_queue_prev(&priv->tx_queue, entry); + target_skb = entry->prev; hole_size -= len; target_addr = last_addr; } largest_hole = max(largest_hole, hole_size); last_addr = range->end_addr; + entry = entry->next; } if (!target_skb && priv->rx_end - last_addr >= len) { - target_skb = skb_peek_tail(&priv->tx_queue); + target_skb = priv->tx_queue.prev; largest_hole = max(largest_hole, priv->rx_end - last_addr - len); if (!skb_queue_empty(&priv->tx_queue)) { info = IEEE80211_SKB_CB(target_skb); @@ -2084,6 +2091,7 @@ out: static void p54_stop(struct ieee80211_hw *dev) { struct p54_common *priv = dev->priv; + struct sk_buff *skb; mutex_lock(&priv->conf_mutex); priv->mode = NL80211_IFTYPE_UNSPECIFIED; @@ -2098,7 +2106,8 @@ static void p54_stop(struct ieee80211_hw *dev) p54_tx_cancel(dev, priv->cached_beacon); priv->stop(dev); - skb_queue_purge(&priv->tx_queue); + while ((skb = skb_dequeue(&priv->tx_queue))) + kfree_skb(skb); priv->cached_beacon = NULL; priv->tsf_high32 = priv->tsf_low32 = 0; mutex_unlock(&priv->conf_mutex); diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index b10b038..698b11b 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -2427,11 +2427,10 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len) #ifdef PCMCIA_DEBUG if (pc_debug > 3) { - int i; - printk(KERN_DEBUG "skb->data before untranslate"); - for (i = 0; i < 64; i++) - printk("%02x ", skb->data[i]); - printk("\n" KERN_DEBUG + print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ", + DUMP_PREFIX_NONE, 16, 1, + skb->data, 64, true); + printk(KERN_DEBUG "type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n", ntohs(type), psnap->dsap, psnap->ssap, psnap->ctrl, psnap->org[0], psnap->org[1], psnap->org[2]); diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 6af7064..c6d3006 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -3556,17 +3556,8 @@ wv_82593_config(struct net_device * dev) cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */ #ifdef DEBUG_I82593_SHOW - { - u_char *c = (u_char *) &cfblk; - int i; - printk(KERN_DEBUG "wavelan_cs: config block:"); - for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++) - { - if((i % 16) == 0) printk("\n" KERN_DEBUG); - printk("%02x ", *c); - } - printk("\n"); - } + print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE, + 16, 1, &cfblk, sizeof(struct i82593_conf_block), false); #endif /* Copy the config block to the i82593 */ diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 14a19ba..0e6e446 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -38,7 +38,6 @@ static struct usb_device_id usb_ids[] = { /* ZD1211 */ { USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 }, - { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 }, @@ -61,6 +60,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ + { USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, @@ -87,6 +87,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B }, /* "Driverless" devices that need ejecting */ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER }, diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index 3c7a505..a075801 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -109,7 +109,7 @@ static int gx_fix; /* These identify the driver base version and may not be removed. */ static const char version[] __devinitconst = KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n" - KERN_INFO " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n"; + " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver"); @@ -700,12 +700,15 @@ static void yellowfin_tx_timeout(struct net_device *dev) int i; printk(KERN_WARNING " Rx ring %p: ", yp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", yp->rx_ring[i].result_status); - printk("\n"KERN_WARNING" Tx ring %p: ", yp->tx_ring); + printk(KERN_CONT " %8.8x", + yp->rx_ring[i].result_status); + printk(KERN_CONT "\n"); + printk(KERN_WARNING" Tx ring %p: ", yp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs, - yp->tx_ring[i].result_status); - printk("\n"); + printk(KERN_CONT " %4.4x /%8.8x", + yp->tx_status[i].tx_errs, + yp->tx_ring[i].result_status); + printk(KERN_CONT "\n"); } /* If the hardware is found to hang regularly, we will update the code @@ -1216,20 +1219,20 @@ static int yellowfin_close(struct net_device *dev) #if defined(__i386__) if (yellowfin_debug > 2) { - printk("\n"KERN_DEBUG" Tx ring at %8.8llx:\n", + printk(KERN_DEBUG" Tx ring at %8.8llx:\n", (unsigned long long)yp->tx_ring_dma); for (i = 0; i < TX_RING_SIZE*2; i++) - printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n", + printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n", ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ', i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr, yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status); printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status); for (i = 0; i < TX_RING_SIZE; i++) - printk(" #%d status %4.4x %4.4x %4.4x %4.4x.\n", + printk(KERN_DEBUG " #%d status %4.4x %4.4x %4.4x %4.4x.\n", i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs, yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused); - printk("\n"KERN_DEBUG " Rx ring %8.8llx:\n", + printk(KERN_DEBUG " Rx ring %8.8llx:\n", (unsigned long long)yp->rx_ring_dma); for (i = 0; i < RX_RING_SIZE; i++) { printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n", diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c index e1f6ce0..3c2270a 100644 --- a/drivers/oprofile/oprofile_stats.c +++ b/drivers/oprofile/oprofile_stats.c @@ -33,6 +33,7 @@ void oprofile_reset_stats(void) atomic_set(&oprofile_stats.sample_lost_no_mm, 0); atomic_set(&oprofile_stats.sample_lost_no_mapping, 0); atomic_set(&oprofile_stats.event_lost_overflow, 0); + atomic_set(&oprofile_stats.bt_lost_no_mapping, 0); } diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 5d610cb..0f0e0b9 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1134,7 +1134,7 @@ static const struct file_operations ccio_proc_bitmap_fops = { .llseek = seq_lseek, .release = single_release, }; -#endif +#endif /* CONFIG_PROC_FS */ /** * ccio_find_ioc - Find the ioc in the ioc_list @@ -1568,14 +1568,15 @@ static int __init ccio_probe(struct parisc_device *dev) /* if this fails, no I/O cards will work, so may as well bug */ BUG_ON(dev->dev.platform_data == NULL); HBA_DATA(dev->dev.platform_data)->iommu = ioc; - + +#ifdef CONFIG_PROC_FS if (ioc_count == 0) { proc_create(MODULE_NAME, 0, proc_runway_root, &ccio_proc_info_fops); proc_create(MODULE_NAME"-bitmap", 0, proc_runway_root, &ccio_proc_bitmap_fops); } - +#endif ioc_count++; parisc_has_iommu(); diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 52ae0b1..c590974e 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -353,7 +353,7 @@ static unsigned int dino_startup_irq(unsigned int irq) return 0; } -static struct hw_interrupt_type dino_interrupt_type = { +static struct irq_chip dino_interrupt_type = { .typename = "GSC-PCI", .startup = dino_startup_irq, .shutdown = dino_disable_irq, @@ -1019,22 +1019,22 @@ static int __init dino_probe(struct parisc_device *dev) ** It's not used to avoid chicken/egg problems ** with configuration accessor functions. */ - bus = pci_scan_bus_parented(&dev->dev, dino_current_bus, - &dino_cfg_ops, NULL); + dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev, + dino_current_bus, &dino_cfg_ops, NULL); + if(bus) { - pci_bus_add_devices(bus); /* This code *depends* on scanning being single threaded * if it isn't, this global bus number count will fail */ dino_current_bus = bus->subordinate + 1; pci_bus_assign_resources(bus); + pci_bus_add_devices(bus); } else { - printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n", + printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n", dev_name(&dev->dev), dino_current_bus); /* increment the bus number in case of duplicates */ dino_current_bus++; } - dino_dev->hba.hba_bus = bus; return 0; } diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index 5b89f40..5122074 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -188,7 +188,7 @@ static unsigned int eisa_startup_irq(unsigned int irq) return 0; } -static struct hw_interrupt_type eisa_interrupt_type = { +static struct irq_chip eisa_interrupt_type = { .typename = "EISA", .startup = eisa_startup_irq, .shutdown = eisa_disable_irq, diff --git a/drivers/parisc/eisa_enumerator.c b/drivers/parisc/eisa_enumerator.c index c709ecc..0be1d50 100644 --- a/drivers/parisc/eisa_enumerator.c +++ b/drivers/parisc/eisa_enumerator.c @@ -101,7 +101,7 @@ static int configure_memory(const unsigned char *buf, printk("memory %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end); result = request_resource(mem_parent, res); if (result < 0) { - printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); + printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); return result; } } @@ -191,7 +191,7 @@ static int configure_port(const unsigned char *buf, struct resource *io_parent, printk("ioports %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end); result = request_resource(io_parent, res); if (result < 0) { - printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); + printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); return result; } } @@ -224,7 +224,7 @@ static int configure_port_init(const unsigned char *buf) case HPEE_PORT_INIT_WIDTH_BYTE: s=1; if (c & HPEE_PORT_INIT_MASK) { - printk("\n" KERN_WARNING "port_init: unverified mask attribute\n"); + printk(KERN_WARNING "port_init: unverified mask attribute\n"); outb((inb(get_16(buf+len+1) & get_8(buf+len+3)) | get_8(buf+len+4)), get_16(buf+len+1)); @@ -249,7 +249,7 @@ static int configure_port_init(const unsigned char *buf) case HPEE_PORT_INIT_WIDTH_DWORD: s=4; if (c & HPEE_PORT_INIT_MASK) { - printk("\n" KERN_WARNING "port_init: unverified mask attribute\n"); + printk(KERN_WARNING "port_init: unverified mask attribute\n"); outl((inl(get_16(buf+len+1) & get_32(buf+len+3)) | get_32(buf+len+7)), get_16(buf+len+1)); @@ -259,7 +259,7 @@ static int configure_port_init(const unsigned char *buf) break; default: - printk("\n" KERN_ERR "Invalid port init word %02x\n", c); + printk(KERN_ERR "Invalid port init word %02x\n", c); return 0; } @@ -297,7 +297,7 @@ static int configure_type_string(const unsigned char *buf) /* just skip past the type field */ len = get_8(buf); if (len > 80) { - printk("\n" KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len); + printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len); } return 1+len; @@ -398,7 +398,7 @@ static int parse_slot_config(int slot, } if (p0 + function_len < pos) { - printk("\n" KERN_ERR "eisa_enumerator: function %d length mis-match " + printk(KERN_ERR "eisa_enumerator: function %d length mis-match " "got %d, expected %d\n", num_func, pos-p0, function_len); res=-1; diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c index d336329..647adc9 100644 --- a/drivers/parisc/gsc.c +++ b/drivers/parisc/gsc.c @@ -148,7 +148,7 @@ static unsigned int gsc_asic_startup_irq(unsigned int irq) return 0; } -static struct hw_interrupt_type gsc_asic_interrupt_type = { +static struct irq_chip gsc_asic_interrupt_type = { .typename = "GSC-ASIC", .startup = gsc_asic_startup_irq, .shutdown = gsc_asic_disable_irq, @@ -158,7 +158,7 @@ static struct hw_interrupt_type gsc_asic_interrupt_type = { .end = no_end_irq, }; -int gsc_assign_irq(struct hw_interrupt_type *type, void *data) +int gsc_assign_irq(struct irq_chip *type, void *data) { static int irq = GSC_IRQ_BASE; struct irq_desc *desc; diff --git a/drivers/parisc/gsc.h b/drivers/parisc/gsc.h index 762a1ba..b9d7bfb 100644 --- a/drivers/parisc/gsc.h +++ b/drivers/parisc/gsc.h @@ -38,7 +38,7 @@ struct gsc_asic { int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic); int gsc_alloc_irq(struct gsc_irq *dev); /* dev needs an irq */ int gsc_claim_irq(struct gsc_irq *dev, int irq); /* dev needs this irq */ -int gsc_assign_irq(struct hw_interrupt_type *type, void *data); +int gsc_assign_irq(struct irq_chip *type, void *data); int gsc_find_local_irq(unsigned int irq, int *global_irq, int limit); void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl, void (*choose)(struct parisc_device *child, void *ctrl)); diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 4a9cc92..88e3335 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -729,7 +729,7 @@ static int iosapic_set_affinity_irq(unsigned int irq, } #endif -static struct hw_interrupt_type iosapic_interrupt_type = { +static struct irq_chip iosapic_interrupt_type = { .typename = "IO-SAPIC-level", .startup = iosapic_startup_irq, .shutdown = iosapic_disable_irq, diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 59fbbf1..ede6146 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -980,28 +980,38 @@ static void lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) { unsigned long bytecnt; - pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; /* PA_VIEW */ - pdc_pat_cell_mod_maddr_block_t io_pdc_cell; /* IO_VIEW */ long io_count; long status; /* PDC return status */ long pa_count; + pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; /* PA_VIEW */ + pdc_pat_cell_mod_maddr_block_t *io_pdc_cell; /* IO_VIEW */ int i; + pa_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL); + if (!pa_pdc_cell) + return; + + io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL); + if (!pa_pdc_cell) { + kfree(pa_pdc_cell); + return; + } + /* return cell module (IO view) */ status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index, - PA_VIEW, & pa_pdc_cell); - pa_count = pa_pdc_cell.mod[1]; + PA_VIEW, pa_pdc_cell); + pa_count = pa_pdc_cell->mod[1]; status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index, - IO_VIEW, &io_pdc_cell); - io_count = io_pdc_cell.mod[1]; + IO_VIEW, io_pdc_cell); + io_count = io_pdc_cell->mod[1]; /* We've already done this once for device discovery...*/ if (status != PDC_OK) { panic("pdc_pat_cell_module() call failed for LBA!\n"); } - if (PAT_GET_ENTITY(pa_pdc_cell.mod_info) != PAT_ENTITY_LBA) { + if (PAT_GET_ENTITY(pa_pdc_cell->mod_info) != PAT_ENTITY_LBA) { panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n"); } @@ -1016,8 +1026,8 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) } *p, *io; struct resource *r; - p = (void *) &(pa_pdc_cell.mod[2+i*3]); - io = (void *) &(io_pdc_cell.mod[2+i*3]); + p = (void *) &(pa_pdc_cell->mod[2+i*3]); + io = (void *) &(io_pdc_cell->mod[2+i*3]); /* Convert the PAT range data to PCI "struct resource" */ switch(p->type & 0xff) { @@ -1096,6 +1106,9 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) break; } } + + kfree(pa_pdc_cell); + kfree(io_pdc_cell); } #else /* keep compiler from complaining about missing declarations */ @@ -1509,10 +1522,6 @@ lba_driver_probe(struct parisc_device *dev) lba_bus = lba_dev->hba.hba_bus = pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start, cfg_ops, NULL); - if (lba_bus) { - lba_next_bus = lba_bus->subordinate + 1; - pci_bus_add_devices(lba_bus); - } /* This is in lieu of calling pci_assign_unassigned_resources() */ if (is_pdc_pat()) { @@ -1533,7 +1542,6 @@ lba_driver_probe(struct parisc_device *dev) } pci_enable_bridges(lba_bus); - /* ** Once PCI register ops has walked the bus, access to config ** space is restricted. Avoids master aborts on config cycles. @@ -1543,6 +1551,11 @@ lba_driver_probe(struct parisc_device *dev) lba_dev->flags |= LBA_FLAG_SKIP_PROBE; } + if (lba_bus) { + lba_next_bus = lba_bus->subordinate + 1; + pci_bus_add_devices(lba_bus); + } + /* Whew! Finally done! Tell services we got this one covered. */ return 0; } diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index d46dd57..123d8fe 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -2057,6 +2057,7 @@ void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r) r->start = (base & ~1UL) | PCI_F_EXTEND; size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK); r->end = r->start + size; + r->flags = IORESOURCE_MEM; } } @@ -2093,4 +2094,5 @@ void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r ) size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC; r->start += rope * (size + 1); /* adjust base for this rope */ r->end = r->start + size; + r->flags = IORESOURCE_MEM; } diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index 33e5ade..675f04e 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -325,7 +325,7 @@ static unsigned int superio_startup_irq(unsigned int irq) return 0; } -static struct hw_interrupt_type superio_interrupt_type = { +static struct irq_chip superio_interrupt_type = { .typename = SUPERIO, .startup = superio_startup_irq, .shutdown = superio_disable_irq, @@ -434,8 +434,8 @@ static void __init superio_parport_init(void) 0 /*base_hi*/, PAR_IRQ, PARPORT_DMA_NONE /* dma */, - NULL /*struct pci_dev* */), - 0 /* shared irq flags */ ) + NULL /*struct pci_dev* */, + 0 /* shared irq flags */)) printk(KERN_WARNING PFX "Probing parallel port failed.\n"); #endif /* CONFIG_PARPORT_PC */ diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 1032d5f..2597145 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2907,6 +2907,7 @@ enum parport_pc_pci_cards { netmos_9755, netmos_9805, netmos_9815, + netmos_9901, quatech_sppxp100, }; @@ -2987,7 +2988,7 @@ static struct parport_pc_pci { /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, - + /* netmos_9901 */ { 1, { { 0, -1 }, } }, /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, }; @@ -3089,6 +3090,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x2000, 0, 0, netmos_9901 }, /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 8445804..5c5043f 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -555,6 +555,8 @@ static struct hotplug_slot *get_slot_from_name (const char *name) * @slot: pointer to the &struct hotplug_slot to register * @devnr: device number * @name: name registered with kobject core + * @owner: caller module owner + * @mod_name: caller module name * * Registers a hotplug slot with the pci hotplug subsystem, which will allow * userspace interaction to the slot. diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index e53eacd..ebc9b8d 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -39,7 +39,6 @@ #include <linux/sysdev.h> #include <asm/cacheflush.h> #include <asm/iommu.h> -#include <asm/e820.h> #include "pci.h" #define ROOT_SIZE VTD_PAGE_SIZE @@ -57,14 +56,32 @@ #define MAX_AGAW_WIDTH 64 #define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1) +#define DOMAIN_MAX_PFN(gaw) ((((u64)1) << (gaw-VTD_PAGE_SHIFT)) - 1) #define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT) #define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32)) #define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64)) -#ifndef PHYSICAL_PAGE_MASK -#define PHYSICAL_PAGE_MASK PAGE_MASK -#endif + +/* VT-d pages must always be _smaller_ than MM pages. Otherwise things + are never going to work. */ +static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn) +{ + return dma_pfn >> (PAGE_SHIFT - VTD_PAGE_SHIFT); +} + +static inline unsigned long mm_to_dma_pfn(unsigned long mm_pfn) +{ + return mm_pfn << (PAGE_SHIFT - VTD_PAGE_SHIFT); +} +static inline unsigned long page_to_dma_pfn(struct page *pg) +{ + return mm_to_dma_pfn(page_to_pfn(pg)); +} +static inline unsigned long virt_to_dma_pfn(void *p) +{ + return page_to_dma_pfn(virt_to_page(p)); +} /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; @@ -205,12 +222,17 @@ static inline void dma_set_pte_prot(struct dma_pte *pte, unsigned long prot) static inline u64 dma_pte_addr(struct dma_pte *pte) { - return (pte->val & VTD_PAGE_MASK); +#ifdef CONFIG_64BIT + return pte->val & VTD_PAGE_MASK; +#else + /* Must have a full atomic 64-bit read */ + return __cmpxchg64(pte, 0ULL, 0ULL) & VTD_PAGE_MASK; +#endif } -static inline void dma_set_pte_addr(struct dma_pte *pte, u64 addr) +static inline void dma_set_pte_pfn(struct dma_pte *pte, unsigned long pfn) { - pte->val |= (addr & VTD_PAGE_MASK); + pte->val |= (uint64_t)pfn << VTD_PAGE_SHIFT; } static inline bool dma_pte_present(struct dma_pte *pte) @@ -218,6 +240,11 @@ static inline bool dma_pte_present(struct dma_pte *pte) return (pte->val & 3) != 0; } +static inline int first_pte_in_page(struct dma_pte *pte) +{ + return !((unsigned long)pte & ~VTD_PAGE_MASK); +} + /* * This domain is a statically identity mapping domain. * 1. This domain creats a static 1:1 mapping to all usable memory. @@ -245,7 +272,6 @@ struct dmar_domain { struct iova_domain iovad; /* iova's that belong to this domain */ struct dma_pte *pgd; /* virtual address */ - spinlock_t mapping_lock; /* page table lock */ int gaw; /* max guest address width */ /* adjusted guest address width, 0 is level 2 30-bit */ @@ -649,80 +675,78 @@ static inline int width_to_agaw(int width) static inline unsigned int level_to_offset_bits(int level) { - return (12 + (level - 1) * LEVEL_STRIDE); + return (level - 1) * LEVEL_STRIDE; } -static inline int address_level_offset(u64 addr, int level) +static inline int pfn_level_offset(unsigned long pfn, int level) { - return ((addr >> level_to_offset_bits(level)) & LEVEL_MASK); + return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK; } -static inline u64 level_mask(int level) +static inline unsigned long level_mask(int level) { - return ((u64)-1 << level_to_offset_bits(level)); + return -1UL << level_to_offset_bits(level); } -static inline u64 level_size(int level) +static inline unsigned long level_size(int level) { - return ((u64)1 << level_to_offset_bits(level)); + return 1UL << level_to_offset_bits(level); } -static inline u64 align_to_level(u64 addr, int level) +static inline unsigned long align_to_level(unsigned long pfn, int level) { - return ((addr + level_size(level) - 1) & level_mask(level)); + return (pfn + level_size(level) - 1) & level_mask(level); } -static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr) +static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain, + unsigned long pfn) { - int addr_width = agaw_to_width(domain->agaw); + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; struct dma_pte *parent, *pte = NULL; int level = agaw_to_level(domain->agaw); int offset; - unsigned long flags; BUG_ON(!domain->pgd); - - addr &= (((u64)1) << addr_width) - 1; + BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width); parent = domain->pgd; - spin_lock_irqsave(&domain->mapping_lock, flags); while (level > 0) { void *tmp_page; - offset = address_level_offset(addr, level); + offset = pfn_level_offset(pfn, level); pte = &parent[offset]; if (level == 1) break; if (!dma_pte_present(pte)) { + uint64_t pteval; + tmp_page = alloc_pgtable_page(); - if (!tmp_page) { - spin_unlock_irqrestore(&domain->mapping_lock, - flags); + if (!tmp_page) return NULL; + + domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE); + pteval = (virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE; + if (cmpxchg64(&pte->val, 0ULL, pteval)) { + /* Someone else set it while we were thinking; use theirs. */ + free_pgtable_page(tmp_page); + } else { + dma_pte_addr(pte); + domain_flush_cache(domain, pte, sizeof(*pte)); } - domain_flush_cache(domain, tmp_page, PAGE_SIZE); - dma_set_pte_addr(pte, virt_to_phys(tmp_page)); - /* - * high level table always sets r/w, last level page - * table control read/write - */ - dma_set_pte_readable(pte); - dma_set_pte_writable(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); } parent = phys_to_virt(dma_pte_addr(pte)); level--; } - spin_unlock_irqrestore(&domain->mapping_lock, flags); return pte; } /* return address's pte at specific level */ -static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr, - int level) +static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain, + unsigned long pfn, + int level) { struct dma_pte *parent, *pte = NULL; int total = agaw_to_level(domain->agaw); @@ -730,7 +754,7 @@ static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr, parent = domain->pgd; while (level <= total) { - offset = address_level_offset(addr, total); + offset = pfn_level_offset(pfn, total); pte = &parent[offset]; if (level == total) return pte; @@ -743,74 +767,82 @@ static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr, return NULL; } -/* clear one page's page table */ -static void dma_pte_clear_one(struct dmar_domain *domain, u64 addr) -{ - struct dma_pte *pte = NULL; - - /* get last level pte */ - pte = dma_addr_level_pte(domain, addr, 1); - - if (pte) { - dma_clear_pte(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); - } -} - /* clear last level pte, a tlb flush should be followed */ -static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end) +static void dma_pte_clear_range(struct dmar_domain *domain, + unsigned long start_pfn, + unsigned long last_pfn) { - int addr_width = agaw_to_width(domain->agaw); - int npages; + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; + struct dma_pte *first_pte, *pte; - start &= (((u64)1) << addr_width) - 1; - end &= (((u64)1) << addr_width) - 1; - /* in case it's partial page */ - start &= PAGE_MASK; - end = PAGE_ALIGN(end); - npages = (end - start) / VTD_PAGE_SIZE; + BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); - /* we don't need lock here, nobody else touches the iova range */ - while (npages--) { - dma_pte_clear_one(domain, start); - start += VTD_PAGE_SIZE; + /* we don't need lock here; nobody else touches the iova range */ + while (start_pfn <= last_pfn) { + first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1); + if (!pte) { + start_pfn = align_to_level(start_pfn + 1, 2); + continue; + } + do { + dma_clear_pte(pte); + start_pfn++; + pte++; + } while (start_pfn <= last_pfn && !first_pte_in_page(pte)); + + domain_flush_cache(domain, first_pte, + (void *)pte - (void *)first_pte); } } /* free page table pages. last level pte should already be cleared */ static void dma_pte_free_pagetable(struct dmar_domain *domain, - u64 start, u64 end) + unsigned long start_pfn, + unsigned long last_pfn) { - int addr_width = agaw_to_width(domain->agaw); - struct dma_pte *pte; + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; + struct dma_pte *first_pte, *pte; int total = agaw_to_level(domain->agaw); int level; - u64 tmp; + unsigned long tmp; - start &= (((u64)1) << addr_width) - 1; - end &= (((u64)1) << addr_width) - 1; + BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width); + BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width); - /* we don't need lock here, nobody else touches the iova range */ + /* We don't need lock here; nobody else touches the iova range */ level = 2; while (level <= total) { - tmp = align_to_level(start, level); - if (tmp >= end || (tmp + level_size(level) > end)) + tmp = align_to_level(start_pfn, level); + + /* If we can't even clear one PTE at this level, we're done */ + if (tmp + level_size(level) - 1 > last_pfn) return; - while (tmp < end) { - pte = dma_addr_level_pte(domain, tmp, level); - if (pte) { - free_pgtable_page( - phys_to_virt(dma_pte_addr(pte))); - dma_clear_pte(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); + while (tmp + level_size(level) - 1 <= last_pfn) { + first_pte = pte = dma_pfn_level_pte(domain, tmp, level); + if (!pte) { + tmp = align_to_level(tmp + 1, level + 1); + continue; } - tmp += level_size(level); + do { + if (dma_pte_present(pte)) { + free_pgtable_page(phys_to_virt(dma_pte_addr(pte))); + dma_clear_pte(pte); + } + pte++; + tmp += level_size(level); + } while (!first_pte_in_page(pte) && + tmp + level_size(level) - 1 <= last_pfn); + + domain_flush_cache(domain, first_pte, + (void *)pte - (void *)first_pte); + } level++; } /* free pgd */ - if (start == 0 && end >= ((((u64)1) << addr_width) - 1)) { + if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) { free_pgtable_page(domain->pgd); domain->pgd = NULL; } @@ -1036,11 +1068,11 @@ static void iommu_flush_dev_iotlb(struct dmar_domain *domain, } static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did, - u64 addr, unsigned int pages) + unsigned long pfn, unsigned int pages) { unsigned int mask = ilog2(__roundup_pow_of_two(pages)); + uint64_t addr = (uint64_t)pfn << VTD_PAGE_SHIFT; - BUG_ON(addr & (~VTD_PAGE_MASK)); BUG_ON(pages == 0); /* @@ -1055,7 +1087,12 @@ static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did, else iommu->flush.flush_iotlb(iommu, did, addr, mask, DMA_TLB_PSI_FLUSH); - if (did) + + /* + * In caching mode, domain ID 0 is reserved for non-present to present + * mapping flush. Device IOTLB doesn't need to be flushed in this case. + */ + if (!cap_caching_mode(iommu->cap) || did) iommu_flush_dev_iotlb(iommu->domains[did], addr, mask); } @@ -1280,7 +1317,6 @@ static void dmar_init_reserved_ranges(void) struct pci_dev *pdev = NULL; struct iova *iova; int i; - u64 addr, size; init_iova_domain(&reserved_iova_list, DMA_32BIT_PFN); @@ -1303,12 +1339,9 @@ static void dmar_init_reserved_ranges(void) r = &pdev->resource[i]; if (!r->flags || !(r->flags & IORESOURCE_MEM)) continue; - addr = r->start; - addr &= PHYSICAL_PAGE_MASK; - size = r->end - addr; - size = PAGE_ALIGN(size); - iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr), - IOVA_PFN(size + addr) - 1); + iova = reserve_iova(&reserved_iova_list, + IOVA_PFN(r->start), + IOVA_PFN(r->end)); if (!iova) printk(KERN_ERR "Reserve iova failed\n"); } @@ -1342,7 +1375,6 @@ static int domain_init(struct dmar_domain *domain, int guest_width) unsigned long sagaw; init_iova_domain(&domain->iovad, DMA_32BIT_PFN); - spin_lock_init(&domain->mapping_lock); spin_lock_init(&domain->iommu_lock); domain_reserve_special_ranges(domain); @@ -1389,7 +1421,6 @@ static void domain_exit(struct dmar_domain *domain) { struct dmar_drhd_unit *drhd; struct intel_iommu *iommu; - u64 end; /* Domain 0 is reserved, so dont process it */ if (!domain) @@ -1398,14 +1429,12 @@ static void domain_exit(struct dmar_domain *domain) domain_remove_dev_info(domain); /* destroy iovas */ put_iova_domain(&domain->iovad); - end = DOMAIN_MAX_ADDR(domain->gaw); - end = end & (~PAGE_MASK); /* clear ptes */ - dma_pte_clear_range(domain, 0, end); + dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); /* free page tables */ - dma_pte_free_pagetable(domain, 0, end); + dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); for_each_active_iommu(iommu, drhd) if (test_bit(iommu->seq_id, &domain->iommu_bmp)) @@ -1619,42 +1648,86 @@ static int domain_context_mapped(struct pci_dev *pdev) tmp->devfn); } -static int -domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, - u64 hpa, size_t size, int prot) +static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + struct scatterlist *sg, unsigned long phys_pfn, + unsigned long nr_pages, int prot) { - u64 start_pfn, end_pfn; - struct dma_pte *pte; - int index; - int addr_width = agaw_to_width(domain->agaw); + struct dma_pte *first_pte = NULL, *pte = NULL; + phys_addr_t uninitialized_var(pteval); + int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT; + unsigned long sg_res; - hpa &= (((u64)1) << addr_width) - 1; + BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width); if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0) return -EINVAL; - iova &= PAGE_MASK; - start_pfn = ((u64)hpa) >> VTD_PAGE_SHIFT; - end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT; - index = 0; - while (start_pfn < end_pfn) { - pte = addr_to_dma_pte(domain, iova + VTD_PAGE_SIZE * index); - if (!pte) - return -ENOMEM; + + prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP; + + if (sg) + sg_res = 0; + else { + sg_res = nr_pages + 1; + pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | prot; + } + + while (nr_pages--) { + uint64_t tmp; + + if (!sg_res) { + sg_res = (sg->offset + sg->length + VTD_PAGE_SIZE - 1) >> VTD_PAGE_SHIFT; + sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset; + sg->dma_length = sg->length; + pteval = page_to_phys(sg_page(sg)) | prot; + } + if (!pte) { + first_pte = pte = pfn_to_dma_pte(domain, iov_pfn); + if (!pte) + return -ENOMEM; + } /* We don't need lock here, nobody else * touches the iova range */ - BUG_ON(dma_pte_addr(pte)); - dma_set_pte_addr(pte, start_pfn << VTD_PAGE_SHIFT); - dma_set_pte_prot(pte, prot); - if (prot & DMA_PTE_SNP) - dma_set_pte_snp(pte); - domain_flush_cache(domain, pte, sizeof(*pte)); - start_pfn++; - index++; + tmp = cmpxchg64_local(&pte->val, 0ULL, pteval); + if (tmp) { + static int dumps = 5; + printk(KERN_CRIT "ERROR: DMA PTE for vPFN 0x%lx already set (to %llx not %llx)\n", + iov_pfn, tmp, (unsigned long long)pteval); + if (dumps) { + dumps--; + debug_dma_dump_mappings(NULL); + } + WARN_ON(1); + } + pte++; + if (!nr_pages || first_pte_in_page(pte)) { + domain_flush_cache(domain, first_pte, + (void *)pte - (void *)first_pte); + pte = NULL; + } + iov_pfn++; + pteval += VTD_PAGE_SIZE; + sg_res--; + if (!sg_res) + sg = sg_next(sg); } return 0; } +static inline int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + struct scatterlist *sg, unsigned long nr_pages, + int prot) +{ + return __domain_mapping(domain, iov_pfn, sg, 0, nr_pages, prot); +} + +static inline int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn, + unsigned long phys_pfn, unsigned long nr_pages, + int prot) +{ + return __domain_mapping(domain, iov_pfn, NULL, phys_pfn, nr_pages, prot); +} + static void iommu_detach_dev(struct intel_iommu *iommu, u8 bus, u8 devfn) { if (!iommu) @@ -1845,58 +1918,61 @@ error: static int iommu_identity_mapping; +static int iommu_domain_identity_map(struct dmar_domain *domain, + unsigned long long start, + unsigned long long end) +{ + unsigned long first_vpfn = start >> VTD_PAGE_SHIFT; + unsigned long last_vpfn = end >> VTD_PAGE_SHIFT; + + if (!reserve_iova(&domain->iovad, dma_to_mm_pfn(first_vpfn), + dma_to_mm_pfn(last_vpfn))) { + printk(KERN_ERR "IOMMU: reserve iova failed\n"); + return -ENOMEM; + } + + pr_debug("Mapping reserved region %llx-%llx for domain %d\n", + start, end, domain->id); + /* + * RMRR range might have overlap with physical memory range, + * clear it first + */ + dma_pte_clear_range(domain, first_vpfn, last_vpfn); + + return domain_pfn_mapping(domain, first_vpfn, first_vpfn, + last_vpfn - first_vpfn + 1, + DMA_PTE_READ|DMA_PTE_WRITE); +} + static int iommu_prepare_identity_map(struct pci_dev *pdev, unsigned long long start, unsigned long long end) { struct dmar_domain *domain; - unsigned long size; - unsigned long long base; int ret; printk(KERN_INFO - "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n", - pci_name(pdev), start, end); - if (iommu_identity_mapping) - domain = si_domain; - else - /* page table init */ - domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH); + "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n", + pci_name(pdev), start, end); + + domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH); if (!domain) return -ENOMEM; - /* The address might not be aligned */ - base = start & PAGE_MASK; - size = end - base; - size = PAGE_ALIGN(size); - if (!reserve_iova(&domain->iovad, IOVA_PFN(base), - IOVA_PFN(base + size) - 1)) { - printk(KERN_ERR "IOMMU: reserve iova failed\n"); - ret = -ENOMEM; - goto error; - } - - pr_debug("Mapping reserved region %lx@%llx for %s\n", - size, base, pci_name(pdev)); - /* - * RMRR range might have overlap with physical memory range, - * clear it first - */ - dma_pte_clear_range(domain, base, base + size); - - ret = domain_page_mapping(domain, base, base, size, - DMA_PTE_READ|DMA_PTE_WRITE); + ret = iommu_domain_identity_map(domain, start, end); if (ret) goto error; /* context entry init */ ret = domain_context_mapping(domain, pdev, CONTEXT_TT_MULTI_LEVEL); - if (!ret) - return 0; -error: + if (ret) + goto error; + + return 0; + + error: domain_exit(domain); return ret; - } static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr, @@ -1908,64 +1984,6 @@ static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr, rmrr->end_address + 1); } -#ifdef CONFIG_DMAR_GFX_WA -struct iommu_prepare_data { - struct pci_dev *pdev; - int ret; -}; - -static int __init iommu_prepare_work_fn(unsigned long start_pfn, - unsigned long end_pfn, void *datax) -{ - struct iommu_prepare_data *data; - - data = (struct iommu_prepare_data *)datax; - - data->ret = iommu_prepare_identity_map(data->pdev, - start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT); - return data->ret; - -} - -static int __init iommu_prepare_with_active_regions(struct pci_dev *pdev) -{ - int nid; - struct iommu_prepare_data data; - - data.pdev = pdev; - data.ret = 0; - - for_each_online_node(nid) { - work_with_active_regions(nid, iommu_prepare_work_fn, &data); - if (data.ret) - return data.ret; - } - return data.ret; -} - -static void __init iommu_prepare_gfx_mapping(void) -{ - struct pci_dev *pdev = NULL; - int ret; - - for_each_pci_dev(pdev) { - if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO || - !IS_GFX_DEVICE(pdev)) - continue; - printk(KERN_INFO "IOMMU: gfx device %s 1-1 mapping\n", - pci_name(pdev)); - ret = iommu_prepare_with_active_regions(pdev); - if (ret) - printk(KERN_ERR "IOMMU: mapping reserved region failed\n"); - } -} -#else /* !CONFIG_DMAR_GFX_WA */ -static inline void iommu_prepare_gfx_mapping(void) -{ - return; -} -#endif - #ifdef CONFIG_DMAR_FLOPPY_WA static inline void iommu_prepare_isa(void) { @@ -1976,12 +1994,12 @@ static inline void iommu_prepare_isa(void) if (!pdev) return; - printk(KERN_INFO "IOMMU: Prepare 0-16M unity mapping for LPC\n"); + printk(KERN_INFO "IOMMU: Prepare 0-16MiB unity mapping for LPC\n"); ret = iommu_prepare_identity_map(pdev, 0, 16*1024*1024); if (ret) - printk(KERN_ERR "IOMMU: Failed to create 0-64M identity map, " - "floppy might not work\n"); + printk(KERN_ERR "IOMMU: Failed to create 0-16MiB identity map; " + "floppy might not work\n"); } #else @@ -2009,16 +2027,30 @@ static int __init init_context_pass_through(void) } static int md_domain_init(struct dmar_domain *domain, int guest_width); + +static int __init si_domain_work_fn(unsigned long start_pfn, + unsigned long end_pfn, void *datax) +{ + int *ret = datax; + + *ret = iommu_domain_identity_map(si_domain, + (uint64_t)start_pfn << PAGE_SHIFT, + (uint64_t)end_pfn << PAGE_SHIFT); + return *ret; + +} + static int si_domain_init(void) { struct dmar_drhd_unit *drhd; struct intel_iommu *iommu; - int ret = 0; + int nid, ret = 0; si_domain = alloc_domain(); if (!si_domain) return -EFAULT; + pr_debug("Identity mapping domain is domain %d\n", si_domain->id); for_each_active_iommu(iommu, drhd) { ret = iommu_attach_domain(si_domain, iommu); @@ -2035,6 +2067,12 @@ static int si_domain_init(void) si_domain->flags = DOMAIN_FLAG_STATIC_IDENTITY; + for_each_online_node(nid) { + work_with_active_regions(nid, si_domain_work_fn, &ret); + if (ret) + return ret; + } + return 0; } @@ -2079,9 +2117,49 @@ static int domain_add_dev_info(struct dmar_domain *domain, return 0; } +static int iommu_should_identity_map(struct pci_dev *pdev, int startup) +{ + if (iommu_identity_mapping == 2) + return IS_GFX_DEVICE(pdev); + + /* + * We want to start off with all devices in the 1:1 domain, and + * take them out later if we find they can't access all of memory. + * + * However, we can't do this for PCI devices behind bridges, + * because all PCI devices behind the same bridge will end up + * with the same source-id on their transactions. + * + * Practically speaking, we can't change things around for these + * devices at run-time, because we can't be sure there'll be no + * DMA transactions in flight for any of their siblings. + * + * So PCI devices (unless they're on the root bus) as well as + * their parent PCI-PCI or PCIe-PCI bridges must be left _out_ of + * the 1:1 domain, just in _case_ one of their siblings turns out + * not to be able to map all of memory. + */ + if (!pdev->is_pcie) { + if (!pci_is_root_bus(pdev->bus)) + return 0; + if (pdev->class >> 8 == PCI_CLASS_BRIDGE_PCI) + return 0; + } else if (pdev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) + return 0; + + /* + * At boot time, we don't yet know if devices will be 64-bit capable. + * Assume that they will -- if they turn out not to be, then we can + * take them out of the 1:1 domain later. + */ + if (!startup) + return pdev->dma_mask > DMA_BIT_MASK(32); + + return 1; +} + static int iommu_prepare_static_identity_mapping(void) { - int i; struct pci_dev *pdev = NULL; int ret; @@ -2089,23 +2167,19 @@ static int iommu_prepare_static_identity_mapping(void) if (ret) return -EFAULT; - printk(KERN_INFO "IOMMU: Setting identity map:\n"); for_each_pci_dev(pdev) { - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (ei->type == E820_RAM) { - ret = iommu_prepare_identity_map(pdev, - ei->addr, ei->addr + ei->size); - if (ret) { - printk(KERN_INFO "1:1 mapping to one domain failed.\n"); - return -EFAULT; - } - } + if (iommu_should_identity_map(pdev, 1)) { + printk(KERN_INFO "IOMMU: identity mapping for device %s\n", + pci_name(pdev)); + + ret = domain_context_mapping(si_domain, pdev, + CONTEXT_TT_MULTI_LEVEL); + if (ret) + return ret; + ret = domain_add_dev_info(si_domain, pdev); + if (ret) + return ret; } - ret = domain_add_dev_info(si_domain, pdev); - if (ret) - return ret; } return 0; @@ -2260,6 +2334,10 @@ int __init init_dmars(void) * identity mapping if iommu_identity_mapping is set. */ if (!iommu_pass_through) { +#ifdef CONFIG_DMAR_BROKEN_GFX_WA + if (!iommu_identity_mapping) + iommu_identity_mapping = 2; +#endif if (iommu_identity_mapping) iommu_prepare_static_identity_mapping(); /* @@ -2293,8 +2371,6 @@ int __init init_dmars(void) } } - iommu_prepare_gfx_mapping(); - iommu_prepare_isa(); } @@ -2339,50 +2415,40 @@ error: return ret; } -static inline u64 aligned_size(u64 host_addr, size_t size) +/* Returns a number of VTD pages, but aligned to MM page size */ +static inline unsigned long aligned_nrpages(unsigned long host_addr, + size_t size) { - u64 addr; - addr = (host_addr & (~PAGE_MASK)) + size; - return PAGE_ALIGN(addr); -} - -struct iova * -iommu_alloc_iova(struct dmar_domain *domain, size_t size, u64 end) -{ - struct iova *piova; - - /* Make sure it's in range */ - end = min_t(u64, DOMAIN_MAX_ADDR(domain->gaw), end); - if (!size || (IOVA_START_ADDR + size > end)) - return NULL; - - piova = alloc_iova(&domain->iovad, - size >> PAGE_SHIFT, IOVA_PFN(end), 1); - return piova; + host_addr &= ~PAGE_MASK; + return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT; } -static struct iova * -__intel_alloc_iova(struct device *dev, struct dmar_domain *domain, - size_t size, u64 dma_mask) +/* This takes a number of _MM_ pages, not VTD pages */ +static struct iova *intel_alloc_iova(struct device *dev, + struct dmar_domain *domain, + unsigned long nrpages, uint64_t dma_mask) { struct pci_dev *pdev = to_pci_dev(dev); struct iova *iova = NULL; - if (dma_mask <= DMA_BIT_MASK(32) || dmar_forcedac) - iova = iommu_alloc_iova(domain, size, dma_mask); - else { + /* Restrict dma_mask to the width that the iommu can handle */ + dma_mask = min_t(uint64_t, DOMAIN_MAX_ADDR(domain->gaw), dma_mask); + + if (!dmar_forcedac && dma_mask > DMA_BIT_MASK(32)) { /* * First try to allocate an io virtual address in * DMA_BIT_MASK(32) and if that fails then try allocating * from higher range */ - iova = iommu_alloc_iova(domain, size, DMA_BIT_MASK(32)); - if (!iova) - iova = iommu_alloc_iova(domain, size, dma_mask); - } - - if (!iova) { - printk(KERN_ERR"Allocating iova for %s failed", pci_name(pdev)); + iova = alloc_iova(&domain->iovad, nrpages, + IOVA_PFN(DMA_BIT_MASK(32)), 1); + if (iova) + return iova; + } + iova = alloc_iova(&domain->iovad, nrpages, IOVA_PFN(dma_mask), 1); + if (unlikely(!iova)) { + printk(KERN_ERR "Allocating %ld-page iova for %s failed", + nrpages, pci_name(pdev)); return NULL; } @@ -2424,16 +2490,24 @@ static int iommu_dummy(struct pci_dev *pdev) } /* Check if the pdev needs to go through non-identity map and unmap process.*/ -static int iommu_no_mapping(struct pci_dev *pdev) +static int iommu_no_mapping(struct device *dev) { + struct pci_dev *pdev; int found; + if (unlikely(dev->bus != &pci_bus_type)) + return 1; + + pdev = to_pci_dev(dev); + if (iommu_dummy(pdev)) + return 1; + if (!iommu_identity_mapping) - return iommu_dummy(pdev); + return 0; found = identity_mapping(pdev); if (found) { - if (pdev->dma_mask > DMA_BIT_MASK(32)) + if (iommu_should_identity_map(pdev, 0)) return 1; else { /* @@ -2450,9 +2524,12 @@ static int iommu_no_mapping(struct pci_dev *pdev) * In case of a detached 64 bit DMA device from vm, the device * is put into si_domain for identity mapping. */ - if (pdev->dma_mask > DMA_BIT_MASK(32)) { + if (iommu_should_identity_map(pdev, 0)) { int ret; ret = domain_add_dev_info(si_domain, pdev); + if (ret) + return 0; + ret = domain_context_mapping(si_domain, pdev, CONTEXT_TT_MULTI_LEVEL); if (!ret) { printk(KERN_INFO "64bit %s uses identity mapping\n", pci_name(pdev)); @@ -2461,7 +2538,7 @@ static int iommu_no_mapping(struct pci_dev *pdev) } } - return iommu_dummy(pdev); + return 0; } static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, @@ -2477,7 +2554,7 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, BUG_ON(dir == DMA_NONE); - if (iommu_no_mapping(pdev)) + if (iommu_no_mapping(hwdev)) return paddr; domain = get_valid_domain_for_dev(pdev); @@ -2485,14 +2562,13 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, return 0; iommu = domain_get_iommu(domain); - size = aligned_size((u64)paddr, size); + size = aligned_nrpages(paddr, size); - iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); + iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size), + pdev->dma_mask); if (!iova) goto error; - start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT; - /* * Check if DMAR supports zero-length reads on write only * mappings.. @@ -2508,20 +2584,20 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, * might have two guest_addr mapping to the same host paddr, but this * is not a big problem */ - ret = domain_page_mapping(domain, start_paddr, - ((u64)paddr) & PHYSICAL_PAGE_MASK, - size, prot); + ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova->pfn_lo), + paddr >> VTD_PAGE_SHIFT, size, prot); if (ret) goto error; /* it's a non-present to present mapping. Only flush if caching mode */ if (cap_caching_mode(iommu->cap)) - iommu_flush_iotlb_psi(iommu, 0, start_paddr, - size >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, 0, mm_to_dma_pfn(iova->pfn_lo), size); else iommu_flush_write_buffer(iommu); - return start_paddr + ((u64)paddr & (~PAGE_MASK)); + start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT; + start_paddr += paddr & ~PAGE_MASK; + return start_paddr; error: if (iova) @@ -2614,11 +2690,11 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr, { struct pci_dev *pdev = to_pci_dev(dev); struct dmar_domain *domain; - unsigned long start_addr; + unsigned long start_pfn, last_pfn; struct iova *iova; struct intel_iommu *iommu; - if (iommu_no_mapping(pdev)) + if (iommu_no_mapping(dev)) return; domain = find_domain(pdev); @@ -2627,22 +2703,25 @@ static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr, iommu = domain_get_iommu(domain); iova = find_iova(&domain->iovad, IOVA_PFN(dev_addr)); - if (!iova) + if (WARN_ONCE(!iova, "Driver unmaps unmatched page at PFN %llx\n", + (unsigned long long)dev_addr)) return; - start_addr = iova->pfn_lo << PAGE_SHIFT; - size = aligned_size((u64)dev_addr, size); + start_pfn = mm_to_dma_pfn(iova->pfn_lo); + last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1; - pr_debug("Device %s unmapping: %zx@%llx\n", - pci_name(pdev), size, (unsigned long long)start_addr); + pr_debug("Device %s unmapping: pfn %lx-%lx\n", + pci_name(pdev), start_pfn, last_pfn); /* clear the whole page */ - dma_pte_clear_range(domain, start_addr, start_addr + size); + dma_pte_clear_range(domain, start_pfn, last_pfn); + /* free page tables */ - dma_pte_free_pagetable(domain, start_addr, start_addr + size); + dma_pte_free_pagetable(domain, start_pfn, last_pfn); + if (intel_iommu_strict) { - iommu_flush_iotlb_psi(iommu, domain->id, start_addr, - size >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, domain->id, start_pfn, + last_pfn - start_pfn + 1); /* free iova */ __free_iova(&domain->iovad, iova); } else { @@ -2700,17 +2779,13 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, int nelems, enum dma_data_direction dir, struct dma_attrs *attrs) { - int i; struct pci_dev *pdev = to_pci_dev(hwdev); struct dmar_domain *domain; - unsigned long start_addr; + unsigned long start_pfn, last_pfn; struct iova *iova; - size_t size = 0; - phys_addr_t addr; - struct scatterlist *sg; struct intel_iommu *iommu; - if (iommu_no_mapping(pdev)) + if (iommu_no_mapping(hwdev)) return; domain = find_domain(pdev); @@ -2719,22 +2794,21 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, iommu = domain_get_iommu(domain); iova = find_iova(&domain->iovad, IOVA_PFN(sglist[0].dma_address)); - if (!iova) + if (WARN_ONCE(!iova, "Driver unmaps unmatched sglist at PFN %llx\n", + (unsigned long long)sglist[0].dma_address)) return; - for_each_sg(sglist, sg, nelems, i) { - addr = page_to_phys(sg_page(sg)) + sg->offset; - size += aligned_size((u64)addr, sg->length); - } - start_addr = iova->pfn_lo << PAGE_SHIFT; + start_pfn = mm_to_dma_pfn(iova->pfn_lo); + last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1; /* clear the whole page */ - dma_pte_clear_range(domain, start_addr, start_addr + size); + dma_pte_clear_range(domain, start_pfn, last_pfn); + /* free page tables */ - dma_pte_free_pagetable(domain, start_addr, start_addr + size); + dma_pte_free_pagetable(domain, start_pfn, last_pfn); - iommu_flush_iotlb_psi(iommu, domain->id, start_addr, - size >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, domain->id, start_pfn, + (last_pfn - start_pfn + 1)); /* free iova */ __free_iova(&domain->iovad, iova); @@ -2757,21 +2831,20 @@ static int intel_nontranslate_map_sg(struct device *hddev, static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int nelems, enum dma_data_direction dir, struct dma_attrs *attrs) { - phys_addr_t addr; int i; struct pci_dev *pdev = to_pci_dev(hwdev); struct dmar_domain *domain; size_t size = 0; int prot = 0; - size_t offset = 0; + size_t offset_pfn = 0; struct iova *iova = NULL; int ret; struct scatterlist *sg; - unsigned long start_addr; + unsigned long start_vpfn; struct intel_iommu *iommu; BUG_ON(dir == DMA_NONE); - if (iommu_no_mapping(pdev)) + if (iommu_no_mapping(hwdev)) return intel_nontranslate_map_sg(hwdev, sglist, nelems, dir); domain = get_valid_domain_for_dev(pdev); @@ -2780,12 +2853,11 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne iommu = domain_get_iommu(domain); - for_each_sg(sglist, sg, nelems, i) { - addr = page_to_phys(sg_page(sg)) + sg->offset; - size += aligned_size((u64)addr, sg->length); - } + for_each_sg(sglist, sg, nelems, i) + size += aligned_nrpages(sg->offset, sg->length); - iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); + iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size), + pdev->dma_mask); if (!iova) { sglist->dma_length = 0; return 0; @@ -2801,35 +2873,24 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) prot |= DMA_PTE_WRITE; - start_addr = iova->pfn_lo << PAGE_SHIFT; - offset = 0; - for_each_sg(sglist, sg, nelems, i) { - addr = page_to_phys(sg_page(sg)) + sg->offset; - size = aligned_size((u64)addr, sg->length); - ret = domain_page_mapping(domain, start_addr + offset, - ((u64)addr) & PHYSICAL_PAGE_MASK, - size, prot); - if (ret) { - /* clear the page */ - dma_pte_clear_range(domain, start_addr, - start_addr + offset); - /* free page tables */ - dma_pte_free_pagetable(domain, start_addr, - start_addr + offset); - /* free iova */ - __free_iova(&domain->iovad, iova); - return 0; - } - sg->dma_address = start_addr + offset + - ((u64)addr & (~PAGE_MASK)); - sg->dma_length = sg->length; - offset += size; + start_vpfn = mm_to_dma_pfn(iova->pfn_lo); + + ret = domain_sg_mapping(domain, start_vpfn, sglist, mm_to_dma_pfn(size), prot); + if (unlikely(ret)) { + /* clear the page */ + dma_pte_clear_range(domain, start_vpfn, + start_vpfn + size - 1); + /* free page tables */ + dma_pte_free_pagetable(domain, start_vpfn, + start_vpfn + size - 1); + /* free iova */ + __free_iova(&domain->iovad, iova); + return 0; } /* it's a non-present to present mapping. Only flush if caching mode */ if (cap_caching_mode(iommu->cap)) - iommu_flush_iotlb_psi(iommu, 0, start_addr, - offset >> VTD_PAGE_SHIFT); + iommu_flush_iotlb_psi(iommu, 0, start_vpfn, offset_pfn); else iommu_flush_write_buffer(iommu); @@ -3334,7 +3395,6 @@ static int md_domain_init(struct dmar_domain *domain, int guest_width) int adjust_width; init_iova_domain(&domain->iovad, DMA_32BIT_PFN); - spin_lock_init(&domain->mapping_lock); spin_lock_init(&domain->iommu_lock); domain_reserve_special_ranges(domain); @@ -3388,8 +3448,6 @@ static void iommu_free_vm_domain(struct dmar_domain *domain) static void vm_domain_exit(struct dmar_domain *domain) { - u64 end; - /* Domain 0 is reserved, so dont process it */ if (!domain) return; @@ -3397,14 +3455,12 @@ static void vm_domain_exit(struct dmar_domain *domain) vm_domain_remove_all_dev_info(domain); /* destroy iovas */ put_iova_domain(&domain->iovad); - end = DOMAIN_MAX_ADDR(domain->gaw); - end = end & (~VTD_PAGE_MASK); /* clear ptes */ - dma_pte_clear_range(domain, 0, end); + dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); /* free page tables */ - dma_pte_free_pagetable(domain, 0, end); + dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw)); iommu_free_vm_domain(domain); free_domain_mem(domain); @@ -3513,7 +3569,7 @@ static int intel_iommu_map_range(struct iommu_domain *domain, if ((iommu_prot & IOMMU_CACHE) && dmar_domain->iommu_snooping) prot |= DMA_PTE_SNP; - max_addr = (iova & VTD_PAGE_MASK) + VTD_PAGE_ALIGN(size); + max_addr = iova + size; if (dmar_domain->max_addr < max_addr) { int min_agaw; u64 end; @@ -3531,8 +3587,11 @@ static int intel_iommu_map_range(struct iommu_domain *domain, } dmar_domain->max_addr = max_addr; } - - ret = domain_page_mapping(dmar_domain, iova, hpa, size, prot); + /* Round up size to next multiple of PAGE_SIZE, if it and + the low bits of hpa would take us onto the next page */ + size = aligned_nrpages(hpa, size); + ret = domain_pfn_mapping(dmar_domain, iova >> VTD_PAGE_SHIFT, + hpa >> VTD_PAGE_SHIFT, size, prot); return ret; } @@ -3540,15 +3599,15 @@ static void intel_iommu_unmap_range(struct iommu_domain *domain, unsigned long iova, size_t size) { struct dmar_domain *dmar_domain = domain->priv; - dma_addr_t base; - /* The address might not be aligned */ - base = iova & VTD_PAGE_MASK; - size = VTD_PAGE_ALIGN(size); - dma_pte_clear_range(dmar_domain, base, base + size); + if (!size) + return; + + dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT, + (iova + size - 1) >> VTD_PAGE_SHIFT); - if (dmar_domain->max_addr == base + size) - dmar_domain->max_addr = base; + if (dmar_domain->max_addr == iova + size) + dmar_domain->max_addr = iova; } static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain, @@ -3558,7 +3617,7 @@ static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain, struct dma_pte *pte; u64 phys = 0; - pte = addr_to_dma_pte(dmar_domain, iova); + pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT); if (pte) phys = dma_pte_addr(pte); diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c index 2287116..46dd440 100644 --- a/drivers/pci/iova.c +++ b/drivers/pci/iova.c @@ -1,9 +1,19 @@ /* - * Copyright (c) 2006, Intel Corporation. + * Copyright © 2006-2009, Intel Corporation. * - * This file is released under the GPLv2. + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. * - * Copyright (C) 2006-2008 Intel Corporation * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> */ @@ -123,7 +133,15 @@ move_left: /* Insert the new_iova into domain rbtree by holding writer lock */ /* Add new node and rebalance tree. */ { - struct rb_node **entry = &((prev)), *parent = NULL; + struct rb_node **entry, *parent = NULL; + + /* If we have 'prev', it's a valid place to start the + insertion. Otherwise, start from the root. */ + if (prev) + entry = &prev; + else + entry = &iovad->rbroot.rb_node; + /* Figure out where to put new node */ while (*entry) { struct iova *this = container_of(*entry, diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index d9f06fb..d986afb 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -127,17 +127,23 @@ static inline __attribute_const__ u32 msi_enabled_mask(u16 control) * reliably as devices without an INTx disable bit will then generate a * level IRQ which will never be cleared. */ -static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) +static u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) { u32 mask_bits = desc->masked; if (!desc->msi_attrib.maskbit) - return; + return 0; mask_bits &= ~mask; mask_bits |= flag; pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits); - desc->masked = mask_bits; + + return mask_bits; +} + +static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) +{ + desc->masked = __msi_mask_irq(desc, mask, flag); } /* @@ -147,15 +153,21 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) * file. This saves a few milliseconds when initialising devices with lots * of MSI-X interrupts. */ -static void msix_mask_irq(struct msi_desc *desc, u32 flag) +static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag) { u32 mask_bits = desc->masked; unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET; + PCI_MSIX_ENTRY_VECTOR_CTRL; mask_bits &= ~1; mask_bits |= flag; writel(mask_bits, desc->mask_base + offset); - desc->masked = mask_bits; + + return mask_bits; +} + +static void msix_mask_irq(struct msi_desc *desc, u32 flag) +{ + desc->masked = __msix_mask_irq(desc, flag); } static void msi_set_mask_bit(unsigned irq, u32 flag) @@ -188,9 +200,9 @@ void read_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg) void __iomem *base = entry->mask_base + entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; - msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET); - msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET); - msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET); + msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR); + msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR); + msg->data = readl(base + PCI_MSIX_ENTRY_DATA); } else { struct pci_dev *dev = entry->dev; int pos = entry->msi_attrib.pos; @@ -225,11 +237,9 @@ void write_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg) base = entry->mask_base + entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; - writel(msg->address_lo, - base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET); - writel(msg->address_hi, - base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET); - writel(msg->data, base + PCI_MSIX_ENTRY_DATA_OFFSET); + writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR); + writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR); + writel(msg->data, base + PCI_MSIX_ENTRY_DATA); } else { struct pci_dev *dev = entry->dev; int pos = entry->msi_attrib.pos; @@ -385,6 +395,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec) /* Configure MSI capability structure */ ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI); if (ret) { + msi_mask_irq(entry, mask, ~mask); msi_free_irqs(dev); return ret; } @@ -439,8 +450,14 @@ static int msix_capability_init(struct pci_dev *dev, for (i = 0; i < nvec; i++) { entry = alloc_msi_entry(dev); - if (!entry) - break; + if (!entry) { + if (!i) + iounmap(base); + else + msi_free_irqs(dev); + /* No enough memory. Don't try again */ + return -ENOMEM; + } j = entries[i].entry; entry->msi_attrib.is_msix = 1; @@ -487,7 +504,7 @@ static int msix_capability_init(struct pci_dev *dev, set_irq_msi(entry->irq, entry); j = entries[i].entry; entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); + PCI_MSIX_ENTRY_VECTOR_CTRL); msix_mask_irq(entry, 1); i++; } @@ -611,9 +628,11 @@ void pci_msi_shutdown(struct pci_dev *dev) pci_intx_for_msi(dev, 1); dev->msi_enabled = 0; + /* Return the device with MSI unmasked as initial states */ pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl); mask = msi_capable_mask(ctrl); - msi_mask_irq(desc, mask, ~mask); + /* Keep cached state to be restored */ + __msi_mask_irq(desc, mask, ~mask); /* Restore dev->irq to its default pin-assertion irq */ dev->irq = desc->msi_attrib.default_irq; @@ -653,7 +672,6 @@ static int msi_free_irqs(struct pci_dev* dev) list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) { if (entry->msi_attrib.is_msix) { - msix_mask_irq(entry, 1); if (list_is_last(&entry->list, &dev->msi_list)) iounmap(entry->mask_base); } @@ -741,9 +759,17 @@ static void msix_free_all_irqs(struct pci_dev *dev) void pci_msix_shutdown(struct pci_dev* dev) { + struct msi_desc *entry; + if (!pci_msi_enable || !dev || !dev->msix_enabled) return; + /* Return the device with MSI-X masked as initial states */ + list_for_each_entry(entry, &dev->msi_list, list) { + /* Keep cached states to be restored */ + __msix_mask_irq(entry, 1); + } + msix_set_enable(dev, 0); pci_intx_for_msi(dev, 1); dev->msix_enabled = 0; diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index a066284..de27c1c 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -6,11 +6,11 @@ #ifndef MSI_H #define MSI_H -#define PCI_MSIX_ENTRY_SIZE 16 -#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0 -#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4 -#define PCI_MSIX_ENTRY_DATA_OFFSET 8 -#define PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET 12 +#define PCI_MSIX_ENTRY_SIZE 16 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 +#define PCI_MSIX_ENTRY_DATA 8 +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 #define msi_control_reg(base) (base + PCI_MSI_FLAGS) #define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6c93af5..dbd0f94 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1517,11 +1517,20 @@ void pci_enable_ari(struct pci_dev *dev) * * Perform INTx swizzling for a device behind one level of bridge. This is * required by section 9.1 of the PCI-to-PCI bridge specification for devices - * behind bridges on add-in cards. + * behind bridges on add-in cards. For devices with ARI enabled, the slot + * number is always 0 (see the Implementation Note in section 2.2.8.1 of + * the PCI Express Base Specification, Revision 2.1) */ u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin) { - return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1; + int slot; + + if (pci_ari_enabled(dev->bus)) + slot = 0; + else + slot = PCI_SLOT(dev->devfn); + + return (((pin - 1) + slot) % 4) + 1; } int @@ -2171,7 +2180,7 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe) u16 ctrl; struct pci_dev *pdev; - if (dev->subordinate) + if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self) return -ENOTTY; list_for_each_entry(pdev, &dev->bus->devices, bus_list) diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c index ece97df..a928d8a 100644 --- a/drivers/pci/pcie/aer/ecrc.c +++ b/drivers/pci/pcie/aer/ecrc.c @@ -106,7 +106,7 @@ void pcie_set_ecrc_checking(struct pci_dev *dev) disable_ecrc_checking(dev); break; case ECRC_POLICY_ON: - enable_ecrc_checking(dev);; + enable_ecrc_checking(dev); break; default: return; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 56552d7..06b9656 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1058,6 +1058,11 @@ static void __devinit quirk_no_ata_d3(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3); +/* ALi loses some register settings that we cannot then restore */ +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3); +/* VIA comes back fine but we need to keep it alive or ACPI GTM failures + occur when mode detecting */ +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3); /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index eddb074..8c02b6c 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -311,7 +311,7 @@ EXPORT_SYMBOL_GPL(pci_destroy_slot); #include <linux/pci_hotplug.h> /** * pci_hp_create_link - create symbolic link to the hotplug driver module. - * @slot: struct pci_slot + * @pci_slot: struct pci_slot * * Helper function for pci_hotplug_core.c to create symbolic link to * the hotplug driver module. @@ -334,7 +334,7 @@ EXPORT_SYMBOL_GPL(pci_hp_create_module_link); /** * pci_hp_remove_link - remove symbolic link to the hotplug driver module. - * @slot: struct pci_slot + * @pci_slot: struct pci_slot * * Helper function for pci_hotplug_core.c to remove symbolic link to * the hotplug driver module. diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 9ad97ea..8eb0423 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -472,7 +472,8 @@ static int __init init_tcic(void) init_timer(&poll_timer); /* Build interrupt mask */ - printk(", %d sockets\n" KERN_INFO " irq list (", sockets); + printk(KERN_CONT ", %d sockets\n", sockets); + printk(KERN_INFO " irq list ("); if (irq_list_count == 0) mask = irq_mask; else diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c index 659421d..d4ad50d 100644 --- a/drivers/pcmcia/vrc4171_card.c +++ b/drivers/pcmcia/vrc4171_card.c @@ -1,7 +1,7 @@ /* * vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services. * - * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -32,7 +32,7 @@ #include "i82365.h" MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services"); -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); MODULE_LICENSE("GPL"); #define CARD_MAX_SLOTS 2 diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c index 812f038..9b3c158 100644 --- a/drivers/pcmcia/vrc4173_cardu.c +++ b/drivers/pcmcia/vrc4173_cardu.c @@ -6,7 +6,7 @@ * NEC VRC4173 CARDU driver for Socket Services * (This device doesn't support CardBus. it is supporting only 16bit PC Card.) * - * Copyright 2002,2003 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright 2002,2003 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -41,7 +41,7 @@ #include "vrc4173_cardu.h" MODULE_DESCRIPTION("NEC VRC4173 CARDU driver for Socket Services"); -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); MODULE_LICENSE("GPL"); static int vrc4173_cardu_slots; diff --git a/drivers/pcmcia/vrc4173_cardu.h b/drivers/pcmcia/vrc4173_cardu.h index 7d77c74..a7d9601 100644 --- a/drivers/pcmcia/vrc4173_cardu.h +++ b/drivers/pcmcia/vrc4173_cardu.h @@ -5,7 +5,7 @@ * BRIEF MODULE DESCRIPTION * Include file for NEC VRC4173 CARDU. * - * Copyright 2002 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright 2002 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 7232fe7..46dad12 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -355,6 +355,7 @@ config EEEPC_LAPTOP depends on INPUT depends on EXPERIMENTAL depends on RFKILL || RFKILL = n + depends on HOTPLUG_PCI select BACKLIGHT_CLASS_DEVICE select HWMON ---help--- diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 4207b26..ec560f1 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -16,6 +16,8 @@ * GNU General Public License for more details. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -31,6 +33,7 @@ #include <linux/input.h> #include <linux/rfkill.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #define EEEPC_LAPTOP_VERSION "0.1" @@ -40,11 +43,6 @@ #define EEEPC_HOTK_DEVICE_NAME "Hotkey" #define EEEPC_HOTK_HID "ASUS010" -#define EEEPC_LOG EEEPC_HOTK_FILE ": " -#define EEEPC_ERR KERN_ERR EEEPC_LOG -#define EEEPC_WARNING KERN_WARNING EEEPC_LOG -#define EEEPC_NOTICE KERN_NOTICE EEEPC_LOG -#define EEEPC_INFO KERN_INFO EEEPC_LOG /* * Definitions for Asus EeePC @@ -141,8 +139,10 @@ struct eeepc_hotk { u16 event_count[128]; /* count for each event */ struct input_dev *inputdev; u16 *keycode_map; - struct rfkill *eeepc_wlan_rfkill; - struct rfkill *eeepc_bluetooth_rfkill; + struct rfkill *wlan_rfkill; + struct rfkill *bluetooth_rfkill; + struct rfkill *wwan3g_rfkill; + struct hotplug_slot *hotplug_slot; }; /* The actual device the driver binds to */ @@ -213,6 +213,15 @@ static struct acpi_driver eeepc_hotk_driver = { }, }; +/* PCI hotplug ops */ +static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value); + +static struct hotplug_slot_ops eeepc_hotplug_slot_ops = { + .owner = THIS_MODULE, + .get_adapter_status = eeepc_get_adapter_status, + .get_power_status = eeepc_get_adapter_status, +}; + /* The backlight device /sys/class/backlight */ static struct backlight_device *eeepc_backlight_device; @@ -274,20 +283,20 @@ static int set_acpi(int cm, int value) if (method == NULL) return -ENODEV; if (write_acpi_int(ehotk->handle, method, value, NULL)) - printk(EEEPC_WARNING "Error writing %s\n", method); + pr_warning("Error writing %s\n", method); } return 0; } static int get_acpi(int cm) { - int value = -1; + int value = -ENODEV; if ((ehotk->cm_supported & (0x1 << cm))) { const char *method = cm_getv[cm]; if (method == NULL) return -ENODEV; if (read_acpi_int(ehotk->handle, method, &value)) - printk(EEEPC_WARNING "Error reading %s\n", method); + pr_warning("Error reading %s\n", method); } return value; } @@ -359,13 +368,19 @@ static ssize_t store_sys_acpi(int cm, const char *buf, size_t count) rv = parse_arg(buf, count, &value); if (rv > 0) - set_acpi(cm, value); + value = set_acpi(cm, value); + if (value < 0) + return value; return rv; } static ssize_t show_sys_acpi(int cm, char *buf) { - return sprintf(buf, "%d\n", get_acpi(cm)); + int value = get_acpi(cm); + + if (value < 0) + return value; + return sprintf(buf, "%d\n", value); } #define EEEPC_CREATE_DEVICE_ATTR(_name, _cm) \ @@ -539,6 +554,28 @@ static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode) return -EINVAL; } +static void cmsg_quirk(int cm, const char *name) +{ + int dummy; + + /* Some BIOSes do not report cm although it is avaliable. + Check if cm_getv[cm] works and, if yes, assume cm should be set. */ + if (!(ehotk->cm_supported & (1 << cm)) + && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) { + pr_info("%s (%x) not reported by BIOS," + " enabling anyway\n", name, 1 << cm); + ehotk->cm_supported |= 1 << cm; + } +} + +static void cmsg_quirks(void) +{ + cmsg_quirk(CM_ASL_LID, "LID"); + cmsg_quirk(CM_ASL_TYPE, "TYPE"); + cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER"); + cmsg_quirk(CM_ASL_TPD, "TPD"); +} + static int eeepc_hotk_check(void) { const struct key_entry *key; @@ -551,26 +588,24 @@ static int eeepc_hotk_check(void) if (ehotk->device->status.present) { if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag, &buffer)) { - printk(EEEPC_ERR "Hotkey initialization failed\n"); + pr_err("Hotkey initialization failed\n"); return -ENODEV; } else { - printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n", - ehotk->init_flag); + pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag); } /* get control methods supported */ if (read_acpi_int(ehotk->handle, "CMSG" , &ehotk->cm_supported)) { - printk(EEEPC_ERR - "Get control methods supported failed\n"); + pr_err("Get control methods supported failed\n"); return -ENODEV; } else { - printk(EEEPC_INFO - "Get control methods supported: 0x%x\n", - ehotk->cm_supported); + cmsg_quirks(); + pr_info("Get control methods supported: 0x%x\n", + ehotk->cm_supported); } ehotk->inputdev = input_allocate_device(); if (!ehotk->inputdev) { - printk(EEEPC_INFO "Unable to allocate input device\n"); + pr_info("Unable to allocate input device\n"); return 0; } ehotk->inputdev->name = "Asus EeePC extra buttons"; @@ -589,12 +624,12 @@ static int eeepc_hotk_check(void) } result = input_register_device(ehotk->inputdev); if (result) { - printk(EEEPC_INFO "Unable to register input device\n"); + pr_info("Unable to register input device\n"); input_free_device(ehotk->inputdev); return 0; } } else { - printk(EEEPC_ERR "Hotkey device not present, aborting\n"); + pr_err("Hotkey device not present, aborting\n"); return -EINVAL; } return 0; @@ -612,6 +647,19 @@ static int notify_brn(void) return -1; } +static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, + u8 *value) +{ + int val = get_acpi(CM_ASL_WLAN); + + if (val == 1 || val == 0) + *value = val; + else + return -EINVAL; + + return 0; +} + static void eeepc_rfkill_hotplug(void) { struct pci_dev *dev; @@ -619,7 +667,7 @@ static void eeepc_rfkill_hotplug(void) bool blocked; if (!bus) { - printk(EEEPC_WARNING "Unable to find PCI bus 1?\n"); + pr_warning("Unable to find PCI bus 1?\n"); return; } @@ -635,7 +683,7 @@ static void eeepc_rfkill_hotplug(void) if (dev) { pci_bus_assign_resources(bus); if (pci_bus_add_device(dev)) - printk(EEEPC_ERR "Unable to hotplug wifi\n"); + pr_err("Unable to hotplug wifi\n"); } } else { dev = pci_get_slot(bus, 0); @@ -645,7 +693,7 @@ static void eeepc_rfkill_hotplug(void) } } - rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked); + rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); } static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) @@ -718,8 +766,7 @@ static int eeepc_register_rfkill_notifier(char *node) eeepc_rfkill_notify, NULL); if (ACPI_FAILURE(status)) - printk(EEEPC_WARNING - "Failed to register notify on %s\n", node); + pr_warning("Failed to register notify on %s\n", node); } else return -ENODEV; @@ -738,19 +785,66 @@ static void eeepc_unregister_rfkill_notifier(char *node) ACPI_SYSTEM_NOTIFY, eeepc_rfkill_notify); if (ACPI_FAILURE(status)) - printk(EEEPC_ERR - "Error removing rfkill notify handler %s\n", + pr_err("Error removing rfkill notify handler %s\n", node); } } +static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot) +{ + kfree(hotplug_slot->info); + kfree(hotplug_slot); +} + +static int eeepc_setup_pci_hotplug(void) +{ + int ret = -ENOMEM; + struct pci_bus *bus = pci_find_bus(0, 1); + + if (!bus) { + pr_err("Unable to find wifi PCI bus\n"); + return -ENODEV; + } + + ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL); + if (!ehotk->hotplug_slot) + goto error_slot; + + ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info), + GFP_KERNEL); + if (!ehotk->hotplug_slot->info) + goto error_info; + + ehotk->hotplug_slot->private = ehotk; + ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug; + ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops; + eeepc_get_adapter_status(ehotk->hotplug_slot, + &ehotk->hotplug_slot->info->adapter_status); + + ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi"); + if (ret) { + pr_err("Unable to register hotplug slot - %d\n", ret); + goto error_register; + } + + return 0; + +error_register: + kfree(ehotk->hotplug_slot->info); +error_info: + kfree(ehotk->hotplug_slot); + ehotk->hotplug_slot = NULL; +error_slot: + return ret; +} + static int eeepc_hotk_add(struct acpi_device *device) { int result; if (!device) return -EINVAL; - printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n"); + pr_notice(EEEPC_HOTK_NAME "\n"); ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL); if (!ehotk) return -ENOMEM; @@ -764,53 +858,8 @@ static int eeepc_hotk_add(struct acpi_device *device) if (result) goto ehotk_fail; - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); - - if (get_acpi(CM_ASL_WLAN) != -1) { - ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan", - &device->dev, - RFKILL_TYPE_WLAN, - &eeepc_rfkill_ops, - (void *)CM_ASL_WLAN); - - if (!ehotk->eeepc_wlan_rfkill) - goto wlan_fail; - - rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill, - get_acpi(CM_ASL_WLAN) != 1); - result = rfkill_register(ehotk->eeepc_wlan_rfkill); - if (result) - goto wlan_fail; - } - - if (get_acpi(CM_ASL_BLUETOOTH) != -1) { - ehotk->eeepc_bluetooth_rfkill = - rfkill_alloc("eeepc-bluetooth", - &device->dev, - RFKILL_TYPE_BLUETOOTH, - &eeepc_rfkill_ops, - (void *)CM_ASL_BLUETOOTH); - - if (!ehotk->eeepc_bluetooth_rfkill) - goto bluetooth_fail; - - rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill, - get_acpi(CM_ASL_BLUETOOTH) != 1); - result = rfkill_register(ehotk->eeepc_bluetooth_rfkill); - if (result) - goto bluetooth_fail; - } - return 0; - bluetooth_fail: - rfkill_destroy(ehotk->eeepc_bluetooth_rfkill); - rfkill_unregister(ehotk->eeepc_wlan_rfkill); - wlan_fail: - rfkill_destroy(ehotk->eeepc_wlan_rfkill); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); ehotk_fail: kfree(ehotk); ehotk = NULL; @@ -823,16 +872,13 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type) if (!device || !acpi_driver_data(device)) return -EINVAL; - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); - kfree(ehotk); return 0; } static int eeepc_hotk_resume(struct acpi_device *device) { - if (ehotk->eeepc_wlan_rfkill) { + if (ehotk->wlan_rfkill) { bool wlan; /* Workaround - it seems that _PTS disables the wireless @@ -844,14 +890,13 @@ static int eeepc_hotk_resume(struct acpi_device *device) wlan = get_acpi(CM_ASL_WLAN); set_acpi(CM_ASL_WLAN, wlan); - rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, - wlan != 1); + rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1); eeepc_rfkill_hotplug(); } - if (ehotk->eeepc_bluetooth_rfkill) - rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill, + if (ehotk->bluetooth_rfkill) + rfkill_set_sw_state(ehotk->bluetooth_rfkill, get_acpi(CM_ASL_BLUETOOTH) != 1); return 0; @@ -973,10 +1018,16 @@ static void eeepc_backlight_exit(void) static void eeepc_rfkill_exit(void) { - if (ehotk->eeepc_wlan_rfkill) - rfkill_unregister(ehotk->eeepc_wlan_rfkill); - if (ehotk->eeepc_bluetooth_rfkill) - rfkill_unregister(ehotk->eeepc_bluetooth_rfkill); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); + if (ehotk->wlan_rfkill) + rfkill_unregister(ehotk->wlan_rfkill); + if (ehotk->bluetooth_rfkill) + rfkill_unregister(ehotk->bluetooth_rfkill); + if (ehotk->wwan3g_rfkill) + rfkill_unregister(ehotk->wwan3g_rfkill); + if (ehotk->hotplug_slot) + pci_hp_deregister(ehotk->hotplug_slot); } static void eeepc_input_exit(void) @@ -1011,6 +1062,75 @@ static void __exit eeepc_laptop_exit(void) platform_driver_unregister(&platform_driver); } +static int eeepc_new_rfkill(struct rfkill **rfkill, + const char *name, struct device *dev, + enum rfkill_type type, int cm) +{ + int result; + + result = get_acpi(cm); + if (result < 0) + return result; + + *rfkill = rfkill_alloc(name, dev, type, + &eeepc_rfkill_ops, (void *)(unsigned long)cm); + + if (!*rfkill) + return -EINVAL; + + rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1); + result = rfkill_register(*rfkill); + if (result) { + rfkill_destroy(*rfkill); + *rfkill = NULL; + return result; + } + return 0; +} + + +static int eeepc_rfkill_init(struct device *dev) +{ + int result = 0; + + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); + + result = eeepc_new_rfkill(&ehotk->wlan_rfkill, + "eeepc-wlan", dev, + RFKILL_TYPE_WLAN, CM_ASL_WLAN); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill, + "eeepc-bluetooth", dev, + RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill, + "eeepc-wwan3g", dev, + RFKILL_TYPE_WWAN, CM_ASL_3G); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_setup_pci_hotplug(); + /* + * If we get -EBUSY then something else is handling the PCI hotplug - + * don't fail in this case + */ + if (result == -EBUSY) + result = 0; + +exit: + if (result && result != -ENODEV) + eeepc_rfkill_exit(); + return result; +} + static int eeepc_backlight_init(struct device *dev) { struct backlight_device *bd; @@ -1018,8 +1138,7 @@ static int eeepc_backlight_init(struct device *dev) bd = backlight_device_register(EEEPC_HOTK_FILE, dev, NULL, &eeepcbl_ops); if (IS_ERR(bd)) { - printk(EEEPC_ERR - "Could not register eeepc backlight device\n"); + pr_err("Could not register eeepc backlight device\n"); eeepc_backlight_device = NULL; return PTR_ERR(bd); } @@ -1038,8 +1157,7 @@ static int eeepc_hwmon_init(struct device *dev) hwmon = hwmon_device_register(dev); if (IS_ERR(hwmon)) { - printk(EEEPC_ERR - "Could not register eeepc hwmon device\n"); + pr_err("Could not register eeepc hwmon device\n"); eeepc_hwmon_device = NULL; return PTR_ERR(hwmon); } @@ -1065,19 +1183,6 @@ static int __init eeepc_laptop_init(void) acpi_bus_unregister_driver(&eeepc_hotk_driver); return -ENODEV; } - dev = acpi_get_physical_device(ehotk->device->handle); - - if (!acpi_video_backlight_support()) { - result = eeepc_backlight_init(dev); - if (result) - goto fail_backlight; - } else - printk(EEEPC_INFO "Backlight controlled by ACPI video " - "driver\n"); - - result = eeepc_hwmon_init(dev); - if (result) - goto fail_hwmon; eeepc_enable_camera(); @@ -1097,7 +1202,33 @@ static int __init eeepc_laptop_init(void) &platform_attribute_group); if (result) goto fail_sysfs; + + dev = &platform_device->dev; + + if (!acpi_video_backlight_support()) { + result = eeepc_backlight_init(dev); + if (result) + goto fail_backlight; + } else + pr_info("Backlight controlled by ACPI video " + "driver\n"); + + result = eeepc_hwmon_init(dev); + if (result) + goto fail_hwmon; + + result = eeepc_rfkill_init(dev); + if (result) + goto fail_rfkill; + return 0; +fail_rfkill: + eeepc_hwmon_exit(); +fail_hwmon: + eeepc_backlight_exit(); +fail_backlight: + sysfs_remove_group(&platform_device->dev.kobj, + &platform_attribute_group); fail_sysfs: platform_device_del(platform_device); fail_platform_device2: @@ -1105,12 +1236,7 @@ fail_platform_device2: fail_platform_device1: platform_driver_unregister(&platform_driver); fail_platform_driver: - eeepc_hwmon_exit(); -fail_hwmon: - eeepc_backlight_exit(); -fail_backlight: eeepc_input_exit(); - eeepc_rfkill_exit(); return result; } diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 4ac2311..ca50856 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -171,7 +171,7 @@ static int hp_wmi_tablet_state(void) static int hp_wmi_set_block(void *data, bool blocked) { unsigned long b = (unsigned long) data; - int query = BIT(b + 8) | ((!!blocked) << b); + int query = BIT(b + 8) | ((!blocked) << b); return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query); } diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c index aafd3e6..a118eb0 100644 --- a/drivers/rtc/rtc-bfin.c +++ b/drivers/rtc/rtc-bfin.c @@ -1,8 +1,8 @@ /* * Blackfin On-Chip Real Time Clock Driver - * Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789] + * Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x * - * Copyright 2004-2008 Analog Devices Inc. + * Copyright 2004-2009 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ * @@ -363,7 +363,7 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev) struct bfin_rtc *rtc; struct device *dev = &pdev->dev; int ret = 0; - unsigned long timeout; + unsigned long timeout = jiffies + HZ; dev_dbg_stamp(dev); @@ -374,32 +374,32 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc); device_init_wakeup(dev, 1); + /* Register our RTC with the RTC framework */ + rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, + THIS_MODULE); + if (unlikely(IS_ERR(rtc->rtc_dev))) { + ret = PTR_ERR(rtc->rtc_dev); + goto err; + } + /* Grab the IRQ and init the hardware */ ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev); if (unlikely(ret)) - goto err; + goto err_reg; /* sometimes the bootloader touched things, but the write complete was not * enabled, so let's just do a quick timeout here since the IRQ will not fire ... */ - timeout = jiffies + HZ; while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING) if (time_after(jiffies, timeout)) break; bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE); bfin_write_RTC_SWCNT(0); - /* Register our RTC with the RTC framework */ - rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE); - if (unlikely(IS_ERR(rtc->rtc_dev))) { - ret = PTR_ERR(rtc->rtc_dev); - goto err_irq; - } - return 0; - err_irq: - free_irq(IRQ_RTC, dev); - err: +err_reg: + rtc_device_unregister(rtc->rtc_dev); +err: kfree(rtc); return ret; } diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index 32b2773..713f7bf 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -283,7 +283,7 @@ static void ds1374_work(struct work_struct *work) stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR); if (stat < 0) - return; + goto unlock; if (stat & DS1374_REG_SR_AF) { stat &= ~DS1374_REG_SR_AF; @@ -302,7 +302,7 @@ static void ds1374_work(struct work_struct *work) out: if (!ds1374->exiting) enable_irq(client->irq); - +unlock: mutex_unlock(&ds1374->mutex); } diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c index f11297a..2c839d0 100644 --- a/drivers/rtc/rtc-vr41xx.c +++ b/drivers/rtc/rtc-vr41xx.c @@ -1,7 +1,7 @@ /* * Driver for NEC VR4100 series Real Time Clock unit. * - * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,7 +33,7 @@ #include <asm/io.h> #include <asm/uaccess.h> -MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>"); +MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>"); MODULE_DESCRIPTION("NEC VR4100 series RTC driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index f8b1f04..c11770f 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1696,8 +1696,7 @@ static void dasd_eckd_handle_unsolicited_interrupt(struct dasd_device *device, DBF_DEV_EVENT(DBF_ERR, device, "%s", "unsolicited interrupt received " "(sense available)"); - device->discipline->dump_sense_dbf(device, NULL, irb, - "unsolicited"); + device->discipline->dump_sense_dbf(device, irb, "unsolicited"); } dasd_schedule_device_bh(device); @@ -2941,42 +2940,20 @@ dasd_eckd_dump_ccw_range(struct ccw1 *from, struct ccw1 *to, char *page) } static void -dasd_eckd_dump_sense_dbf(struct dasd_device *device, struct dasd_ccw_req *req, - struct irb *irb, char *reason) +dasd_eckd_dump_sense_dbf(struct dasd_device *device, struct irb *irb, + char *reason) { u64 *sense; - int sl; - struct tsb *tsb; - sense = NULL; - tsb = NULL; - if (req && scsw_is_tm(&req->irb.scsw)) { - if (irb->scsw.tm.tcw) - tsb = tcw_get_tsb( - (struct tcw *)(unsigned long)irb->scsw.tm.tcw); - if (tsb && (irb->scsw.tm.fcxs == 0x01)) { - switch (tsb->flags & 0x07) { - case 1: /* tsa_iostat */ - sense = (u64 *)tsb->tsa.iostat.sense; - break; - case 2: /* ts_ddpc */ - sense = (u64 *)tsb->tsa.ddpc.sense; - break; - case 3: /* tsa_intrg */ - break; - } - } - } else { - if (irb->esw.esw0.erw.cons) - sense = (u64 *)irb->ecw; - } + sense = (u64 *) dasd_get_sense(irb); if (sense) { - for (sl = 0; sl < 4; sl++) { - DBF_DEV_EVENT(DBF_EMERG, device, - "%s: %016llx %016llx %016llx %016llx", - reason, sense[0], sense[1], sense[2], - sense[3]); - } + DBF_DEV_EVENT(DBF_EMERG, device, + "%s: %s %02x%02x%02x %016llx %016llx %016llx " + "%016llx", reason, + scsw_is_tm(&irb->scsw) ? "t" : "c", + scsw_cc(&irb->scsw), scsw_cstat(&irb->scsw), + scsw_dstat(&irb->scsw), sense[0], sense[1], + sense[2], sense[3]); } else { DBF_DEV_EVENT(DBF_EMERG, device, "%s", "SORRY - NO VALID SENSE AVAILABLE\n"); diff --git a/drivers/s390/block/dasd_erp.c b/drivers/s390/block/dasd_erp.c index d970ce2..cb8f9ce 100644 --- a/drivers/s390/block/dasd_erp.c +++ b/drivers/s390/block/dasd_erp.c @@ -172,7 +172,7 @@ dasd_log_sense_dbf(struct dasd_ccw_req *cqr, struct irb *irb) device = cqr->startdev; /* dump sense data to s390 debugfeature*/ if (device->discipline && device->discipline->dump_sense_dbf) - device->discipline->dump_sense_dbf(device, cqr, irb, "log"); + device->discipline->dump_sense_dbf(device, irb, "log"); } EXPORT_SYMBOL(dasd_log_sense_dbf); diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c index e21ee73..31849ad 100644 --- a/drivers/s390/block/dasd_fba.c +++ b/drivers/s390/block/dasd_fba.c @@ -241,7 +241,7 @@ static void dasd_fba_handle_unsolicited_interrupt(struct dasd_device *device, /* check for unsolicited interrupts */ DBF_DEV_EVENT(DBF_WARNING, device, "%s", "unsolicited interrupt received"); - device->discipline->dump_sense_dbf(device, NULL, irb, "unsolicited"); + device->discipline->dump_sense_dbf(device, irb, "unsolicited"); dasd_schedule_device_bh(device); return; }; @@ -444,17 +444,20 @@ dasd_fba_fill_info(struct dasd_device * device, } static void -dasd_fba_dump_sense_dbf(struct dasd_device *device, struct dasd_ccw_req *req, - struct irb *irb, char *reason) +dasd_fba_dump_sense_dbf(struct dasd_device *device, struct irb *irb, + char *reason) { - int sl; - if (irb->esw.esw0.erw.cons) { - for (sl = 0; sl < 4; sl++) { - DBF_DEV_EVENT(DBF_EMERG, device, - "%s: %08x %08x %08x %08x", - reason, irb->ecw[8 * 0], irb->ecw[8 * 1], - irb->ecw[8 * 2], irb->ecw[8 * 3]); - } + u64 *sense; + + sense = (u64 *) dasd_get_sense(irb); + if (sense) { + DBF_DEV_EVENT(DBF_EMERG, device, + "%s: %s %02x%02x%02x %016llx %016llx %016llx " + "%016llx", reason, + scsw_is_tm(&irb->scsw) ? "t" : "c", + scsw_cc(&irb->scsw), scsw_cstat(&irb->scsw), + scsw_dstat(&irb->scsw), sense[0], sense[1], + sense[2], sense[3]); } else { DBF_DEV_EVENT(DBF_EMERG, device, "%s", "SORRY - NO VALID SENSE AVAILABLE\n"); diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index fd63b2f..b699ca3 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -284,8 +284,7 @@ struct dasd_discipline { dasd_erp_fn_t(*erp_postaction) (struct dasd_ccw_req *); void (*dump_sense) (struct dasd_device *, struct dasd_ccw_req *, struct irb *); - void (*dump_sense_dbf) (struct dasd_device *, struct dasd_ccw_req *, - struct irb *, char *); + void (*dump_sense_dbf) (struct dasd_device *, struct irb *, char *); void (*handle_unsolicited_interrupt) (struct dasd_device *, struct irb *); diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c index 016f9e9..d346176 100644 --- a/drivers/s390/block/dcssblk.c +++ b/drivers/s390/block/dcssblk.c @@ -964,7 +964,8 @@ static int dcssblk_freeze(struct device *dev) break; } if (rc) - pr_err("Suspend failed because device %s is writeable.\n", + pr_err("Suspending the system failed because DCSS device %s " + "is writable\n", dev_info->segment_name); return rc; } @@ -987,8 +988,8 @@ static int dcssblk_restore(struct device *dev) goto out_panic; } if (start != entry->start || end != entry->end) { - pr_err("Mismatch of start / end address after " - "resuming device %s\n", + pr_err("The address range of DCSS %s changed " + "while the system was suspended\n", entry->segment_name); goto out_panic; } diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c index 2e9e1ec..db442cd 100644 --- a/drivers/s390/block/xpram.c +++ b/drivers/s390/block/xpram.c @@ -443,7 +443,7 @@ fail: */ static void xpram_resume_error(const char *message) { - pr_err("Resume error: %s\n", message); + pr_err("Resuming the system failed: %s\n", message); panic("xpram resume error\n"); } diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c index 7892550..3234e90 100644 --- a/drivers/s390/char/monreader.c +++ b/drivers/s390/char/monreader.c @@ -320,7 +320,7 @@ static int mon_open(struct inode *inode, struct file *filp) goto out_path; } filp->private_data = monpriv; - dev_set_drvdata(&monreader_device, monpriv); + dev_set_drvdata(monreader_device, monpriv); unlock_kernel(); return nonseekable_open(inode, filp); @@ -463,7 +463,7 @@ static struct miscdevice mon_dev = { *****************************************************************************/ static int monreader_freeze(struct device *dev) { - struct mon_private *monpriv = dev_get_drvdata(&dev); + struct mon_private *monpriv = dev_get_drvdata(dev); int rc; if (!monpriv) diff --git a/drivers/s390/char/sclp_rw.h b/drivers/s390/char/sclp_rw.h index 85f491e..7a7bfc9 100644 --- a/drivers/s390/char/sclp_rw.h +++ b/drivers/s390/char/sclp_rw.h @@ -92,5 +92,10 @@ void sclp_set_columns(struct sclp_buffer *, unsigned short); void sclp_set_htab(struct sclp_buffer *, unsigned short); int sclp_chars_in_buffer(struct sclp_buffer *); +#ifdef CONFIG_SCLP_CONSOLE void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event); +#else +static inline void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event) { } +#endif + #endif /* __SCLP_RW_H__ */ diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c index cb7854c..f2bc287 100644 --- a/drivers/s390/char/vmwatchdog.c +++ b/drivers/s390/char/vmwatchdog.c @@ -250,14 +250,14 @@ static int vmwdt_resume(void) static int vmwdt_suspend(void) { if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) { - pr_err("The watchdog is in use. " - "This prevents hibernation or suspend.\n"); + pr_err("The system cannot be suspended while the watchdog" + " is in use\n"); return NOTIFY_BAD; } if (test_bit(VMWDT_RUNNING, &vmwdt_is_open)) { clear_bit(VMWDT_OPEN, &vmwdt_is_open); - pr_err("The watchdog is running. " - "This prevents hibernation or suspend.\n"); + pr_err("The system cannot be suspended while the watchdog" + " is running\n"); return NOTIFY_BAD; } return NOTIFY_DONE; diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 0471f88..4240b05 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -2826,8 +2826,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) */ local_irq_restore(flags); - printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n" - KERN_INFO " before abortion\n", HOSTNO); + printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); /* Maybe it is sufficient just to release the ST-DMA lock... (if * possible at all) At least, we should check if the lock could be diff --git a/drivers/scsi/cxgb3i/Kbuild b/drivers/scsi/cxgb3i/Kbuild index 25a2032..70d060b 100644 --- a/drivers/scsi/cxgb3i/Kbuild +++ b/drivers/scsi/cxgb3i/Kbuild @@ -1,4 +1,4 @@ -EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3 +EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3 cxgb3i-y := cxgb3i_init.o cxgb3i_iscsi.o cxgb3i_pdu.o cxgb3i_offload.o cxgb3i_ddp.o obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index 74369a3..c399f48 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -13,6 +13,7 @@ #include <linux/inet.h> #include <linux/crypto.h> +#include <linux/if_vlan.h> #include <net/dst.h> #include <net/tcp.h> #include <scsi/scsi_cmnd.h> @@ -184,6 +185,9 @@ static struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev) struct cxgb3i_adapter *snic; int i; + if (ndev->priv_flags & IFF_802_1Q_VLAN) + ndev = vlan_dev_real_dev(ndev); + read_lock(&cxgb3i_snic_rwlock); list_for_each_entry(snic, &cxgb3i_snic_list, list_head) { for (i = 0; i < snic->hba_cnt; i++) { diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c index a840728..2c266c0 100644 --- a/drivers/scsi/fnic/fnic_main.c +++ b/drivers/scsi/fnic/fnic_main.c @@ -473,16 +473,16 @@ static int __devinit fnic_probe(struct pci_dev *pdev, * limitation for the device. Try 40-bit first, and * fail to 32-bit. */ - err = pci_set_dma_mask(pdev, DMA_40BIT_MASK); + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40)); if (err) { - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (err) { shost_printk(KERN_ERR, fnic->lport->host, "No usable DMA configuration " "aborting\n"); goto err_out_release_regions; } - err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (err) { shost_printk(KERN_ERR, fnic->lport->host, "Unable to obtain 32-bit DMA " @@ -490,7 +490,7 @@ static int __devinit fnic_probe(struct pci_dev *pdev, goto err_out_release_regions; } } else { - err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK); + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40)); if (err) { shost_printk(KERN_ERR, fnic->lport->host, "Unable to obtain 40-bit DMA " diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index eabf365..bfc9969 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -245,7 +245,7 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, struct vnic_wq_copy *wq, struct fnic_io_req *io_req, struct scsi_cmnd *sc, - u32 sg_count) + int sg_count) { struct scatterlist *sg; struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); @@ -260,9 +260,6 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, char msg[2]; if (sg_count) { - BUG_ON(sg_count < 0); - BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT); - /* For each SGE, create a device desc entry */ desc = io_req->sgl_list; for_each_sg(scsi_sglist(sc), sg, sg_count, i) { @@ -344,7 +341,7 @@ int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) struct fnic *fnic; struct vnic_wq_copy *wq; int ret; - u32 sg_count; + int sg_count; unsigned long flags; unsigned long ptr; diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 869a11b..9928704 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1095,9 +1095,14 @@ static void adapter_info_rsp(struct srp_event_struct *evt_struct) MAX_INDIRECT_BUFS); hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS; } + + if (hostdata->madapter_info.os_type == 3) { + enable_fast_fail(hostdata); + return; + } } - enable_fast_fail(hostdata); + send_srp_login(hostdata); } /** diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index b12ad7c7..18735b3 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -75,8 +75,9 @@ static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd * int i; printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd); for (i = 0; i < cmd->cmd_len; ++i) - printk(" %.2x", cmd->cmnd[i]); - printk("\n" KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n", + printk(KERN_CONT " %.2x", cmd->cmnd[i]); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n", scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd)); } #endif diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 2eee9e6..292c02f 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3670,13 +3670,14 @@ static void fc_bsg_goose_queue(struct fc_rport *rport) { int flagset; + unsigned long flags; if (!rport->rqst_q) return; get_device(&rport->dev); - spin_lock(rport->rqst_q->queue_lock); + spin_lock_irqsave(rport->rqst_q->queue_lock, flags); flagset = test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags) && !test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags); if (flagset) @@ -3684,7 +3685,7 @@ fc_bsg_goose_queue(struct fc_rport *rport) __blk_run_queue(rport->rqst_q); if (flagset) queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q); - spin_unlock(rport->rqst_q->queue_lock); + spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags); put_device(&rport->dev); } diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 8201387..9230402 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -210,13 +210,11 @@ static void sg_put_dev(Sg_device *sdp); static int sg_allow_access(struct file *filp, unsigned char *cmd) { struct sg_fd *sfp = (struct sg_fd *)filp->private_data; - struct request_queue *q = sfp->parentdp->device->request_queue; if (sfp->parentdp->device->type == TYPE_SCANNER) return 0; - return blk_verify_command(&q->cmd_filter, - cmd, filp->f_mode & FMODE_WRITE); + return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE); } static int @@ -621,7 +619,7 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) if (strcmp(current->comm, cmd) && printk_ratelimit()) { printk(KERN_WARNING "sg_write: data in/out %d/%d bytes for SCSI command 0x%x--" - "guessing data in;\n" KERN_WARNING " " + "guessing data in;\n " "program %s not setting count and/or reply_len properly\n", old_hdr.reply_len - (int)SZ_SG_HEADER, input_size, (unsigned int) cmnd[0], @@ -1658,6 +1656,10 @@ static int sg_start_req(Sg_request *srp, unsigned char *cmd) md->nr_entries = req_schp->k_use_sg; md->offset = 0; md->null_mapped = hp->dxferp ? 0 : 1; + if (dxfer_dir == SG_DXFER_TO_FROM_DEV) + md->from_user = 1; + else + md->from_user = 0; } if (iov_count) { diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index bcaba86..75da6e5 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -2860,8 +2860,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) */ local_irq_restore(flags); - printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n" - KERN_INFO " before abortion\n", HOSTNO); + printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); return SCSI_ABORT_NOT_RUNNING; } diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c index 97f3158..27e84e4 100644 --- a/drivers/scsi/zalon.c +++ b/drivers/scsi/zalon.c @@ -134,7 +134,7 @@ zalon_probe(struct parisc_device *dev) host = ncr_attach(&zalon7xx_template, unit, &device); if (!host) - goto fail; + return -ENODEV; if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) { dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ", diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index a07015d..e7108e7 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -60,11 +60,12 @@ struct serial_private { static void moan_device(const char *str, struct pci_dev *dev) { - printk(KERN_WARNING "%s: %s\n" - KERN_WARNING "Please send the output of lspci -vv, this\n" - KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" - KERN_WARNING "manufacturer and name of serial board or\n" - KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n", + printk(KERN_WARNING + "%s: %s\n" + "Please send the output of lspci -vv, this\n" + "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" + "manufacturer and name of serial board or\n" + "modem board to rmk+serial@arm.linux.org.uk.\n", pci_name(dev), str, dev->vendor, dev->device, dev->subsystem_vendor, dev->subsystem_device); } @@ -759,6 +760,8 @@ static int pci_netmos_init(struct pci_dev *dev) /* subdevice 0x00PS means <P> parallel, <S> serial */ unsigned int num_serial = dev->subsystem_device & 0xf; + if (dev->device == PCI_DEVICE_ID_NETMOS_9901) + return 0; if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && dev->subsystem_device == 0x0299) return 0; @@ -3557,6 +3560,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index bf82e28..72ba0c6 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -826,6 +826,28 @@ static int pl011_remove(struct amba_device *dev) return 0; } +#ifdef CONFIG_PM +static int pl011_suspend(struct amba_device *dev, pm_message_t state) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (!uap) + return -EINVAL; + + return uart_suspend_port(&amba_reg, &uap->port); +} + +static int pl011_resume(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (!uap) + return -EINVAL; + + return uart_resume_port(&amba_reg, &uap->port); +} +#endif + static struct amba_id pl011_ids[] __initdata = { { .id = 0x00041011, @@ -847,6 +869,10 @@ static struct amba_driver pl011_driver = { .id_table = pl011_ids, .probe = pl011_probe, .remove = pl011_remove, +#ifdef CONFIG_PM + .suspend = pl011_suspend, + .resume = pl011_resume, +#endif }; static int __init pl011_init(void) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 66f5267..8e2feb5 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -707,24 +707,25 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { - unsigned short ssr_status, scr_status; + unsigned short ssr_status, scr_status, err_enabled; struct uart_port *port = ptr; irqreturn_t ret = IRQ_NONE; ssr_status = sci_in(port, SCxSR); scr_status = sci_in(port, SCSCR); + err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE); /* Tx Interrupt */ - if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE)) + if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE)) ret = sci_tx_interrupt(irq, ptr); /* Rx Interrupt */ - if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE)) + if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE)) ret = sci_rx_interrupt(irq, ptr); /* Error Interrupt */ - if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE)) + if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) ret = sci_er_interrupt(irq, ptr); /* Break Interrupt */ - if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE)) + if ((ssr_status & SCxSR_BRK(port)) && err_enabled) ret = sci_br_interrupt(irq, ptr); return ret; diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index 0573f3b..dac550e 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -1,7 +1,7 @@ /* * Driver for NEC VR4100 series Serial Interface Unit. * - * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2004-2008 Yoichi Yuasa <yuasa@linux-mips.org> * * Based on drivers/serial/8250.c, by Russell King. * diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index da76797..c0f950a 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -38,14 +38,12 @@ #include <linux/interrupt.h> #include <linux/spi/spi.h> #include <linux/workqueue.h> -#include <linux/errno.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> #include <linux/io.h> -#include <linux/delay.h> /* * This macro is used to define some register default values. diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index aa90ddb..8980a56 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -514,6 +514,8 @@ static int __init uwire_probe(struct platform_device *pdev) /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->flags = SPI_MASTER_HALF_DUPLEX; + master->bus_num = 2; /* "official" */ master->num_chipselect = 4; master->setup = uwire_setup; diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 2a5abc0..f1db395 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -258,6 +258,11 @@ static void bitbang_work(struct work_struct *work) struct spi_bitbang *bitbang = container_of(work, struct spi_bitbang, work); unsigned long flags; + int do_setup = -1; + int (*setup_transfer)(struct spi_device *, + struct spi_transfer *); + + setup_transfer = bitbang->setup_transfer; spin_lock_irqsave(&bitbang->lock, flags); bitbang->busy = 1; @@ -269,8 +274,6 @@ static void bitbang_work(struct work_struct *work) unsigned tmp; unsigned cs_change; int status; - int (*setup_transfer)(struct spi_device *, - struct spi_transfer *); m = container_of(bitbang->queue.next, struct spi_message, queue); @@ -287,19 +290,19 @@ static void bitbang_work(struct work_struct *work) tmp = 0; cs_change = 1; status = 0; - setup_transfer = NULL; list_for_each_entry (t, &m->transfers, transfer_list) { - /* override or restore speed and wordsize */ - if (t->speed_hz || t->bits_per_word) { - setup_transfer = bitbang->setup_transfer; + /* override speed or wordsize? */ + if (t->speed_hz || t->bits_per_word) + do_setup = 1; + + /* init (-1) or override (1) transfer params */ + if (do_setup != 0) { if (!setup_transfer) { status = -ENOPROTOOPT; break; } - } - if (setup_transfer) { status = setup_transfer(spi, t); if (status < 0) break; @@ -363,9 +366,10 @@ static void bitbang_work(struct work_struct *work) m->status = status; m->complete(m->context); - /* restore speed and wordsize */ - if (setup_transfer) + /* restore speed and wordsize if it was overridden */ + if (do_setup == 1) setup_transfer(spi, NULL); + do_setup = 0; /* normally deactivate chipselect ... unless no error and * cs_change has hinted that the next message will probably diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 5d869c4..606e7a4 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -58,15 +58,20 @@ static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; /* Bit masks for spi_device.mode management. Note that incorrect - * settings for CS_HIGH and 3WIRE can cause *lots* of trouble for other - * devices on a shared bus: CS_HIGH, because this device will be - * active when it shouldn't be; 3WIRE, because when active it won't - * behave as it should. + * settings for some settings can cause *lots* of trouble for other + * devices on a shared bus: * - * REVISIT should changing those two modes be privileged? + * - CS_HIGH ... this device will be active when it shouldn't be + * - 3WIRE ... when active, it won't behave as it should + * - NO_CS ... there will be no explicit message boundaries; this + * is completely incompatible with the shared bus model + * - READY ... transfers may proceed when they shouldn't. + * + * REVISIT should changing those flags be privileged? */ #define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \ - | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP) + | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \ + | SPI_NO_CS | SPI_READY) struct spidev_data { dev_t devt; diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c index 3fd3e3b..3c6feed 100644 --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c @@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = { static inline u32 ssb_irqflag(struct ssb_device *dev) { - return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; + u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG); + if (tpsflag) + return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; + else + /* not irq supported */ + return 0x3f; +} + +static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag) +{ + struct ssb_bus *bus = rdev->bus; + int i; + for (i = 0; i < bus->nr_devices; i++) { + struct ssb_device *dev; + dev = &(bus->devices[i]); + if (ssb_irqflag(dev) == irqflag) + return dev; + } + return NULL; } /* Get the MIPS IRQ assignment for a specified device. * If unassigned, 0 is returned. + * If disabled, 5 is returned. + * If not supported, 6 is returned. */ unsigned int ssb_mips_irq(struct ssb_device *dev) { struct ssb_bus *bus = dev->bus; + struct ssb_device *mdev = bus->mipscore.dev; u32 irqflag; u32 ipsflag; u32 tmp; unsigned int irq; irqflag = ssb_irqflag(dev); + if (irqflag == 0x3f) + return 6; ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG); for (irq = 1; irq <= 4; irq++) { tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]); if (tmp == irqflag) break; } - if (irq == 5) - irq = 0; + if (irq == 5) { + if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)) + irq = 0; + } return irq; } @@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *dev, unsigned int irq) struct ssb_device *mdev = bus->mipscore.dev; u32 irqflag = ssb_irqflag(dev); + BUG_ON(oldirq == 6); + dev->irq = irq + 2; - ssb_dprintk(KERN_INFO PFX - "set_irq: core 0x%04x, irq %d => %d\n", - dev->id.coreid, oldirq, irq); /* clear the old irq */ if (oldirq == 0) ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))); - else + else if (oldirq != 5) clear_irq(bus, oldirq); /* assign the new one */ if (irq == 0) { ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC))); } else { + u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG); + if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) { + u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]; + struct ssb_device *olddev = find_device(dev, oldipsflag); + if (olddev) + set_irq(olddev, 0); + } irqflag <<= ipsflag_irq_shift[irq]; - irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]); + irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]); ssb_write32(mdev, SSB_IPSFLAG, irqflag); } + ssb_dprintk(KERN_INFO PFX + "set_irq: core 0x%04x, irq %d => %d\n", + dev->id.coreid, oldirq+2, irq+2); +} + +static void print_irq(struct ssb_device *dev, unsigned int irq) +{ + int i; + static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; + ssb_dprintk(KERN_INFO PFX + "core 0x%04x, irq :", dev->id.coreid); + for (i = 0; i <= 6; i++) { + ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" "); + } + ssb_dprintk("\n"); +} + +static void dump_irq(struct ssb_bus *bus) +{ + int i; + for (i = 0; i < bus->nr_devices; i++) { + struct ssb_device *dev; + dev = &(bus->devices[i]); + print_irq(dev, ssb_mips_irq(dev)); + } } static void ssb_mips_serial_init(struct ssb_mipscore *mcore) @@ -197,16 +253,23 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore) /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ for (irq = 2, i = 0; i < bus->nr_devices; i++) { + int mips_irq; dev = &(bus->devices[i]); - dev->irq = ssb_mips_irq(dev) + 2; + mips_irq = ssb_mips_irq(dev); + if (mips_irq > 4) + dev->irq = 0; + else + dev->irq = mips_irq + 2; + if (dev->irq > 5) + continue; switch (dev->id.coreid) { case SSB_DEV_USB11_HOST: /* shouldn't need a separate irq line for non-4710, most of them have a proper * external usb controller on the pci */ if ((bus->chip_id == 0x4710) && (irq <= 4)) { set_irq(dev, irq++); - break; } + break; /* fallthrough */ case SSB_DEV_PCI: case SSB_DEV_ETHERNET: @@ -220,6 +283,8 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore) } } } + ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); + dump_irq(bus); ssb_mips_serial_init(mcore); ssb_mips_flash_detect(mcore); diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c index fbfadba..100e7a5 100644 --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom) ssb_printk("."); err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); if (err) { - ssb_printk("\n" KERN_NOTICE PFX + ssb_printk(KERN_NOTICE PFX "Failed to write to SPROM.\n"); failed = 1; break; @@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom) } err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); if (err) { - ssb_printk("\n" KERN_NOTICE PFX + ssb_printk(KERN_NOTICE PFX "Could not disable SPROM write access.\n"); failed = 1; } @@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus, sprom->board_rev = tuple.TupleData[1]; break; case SSB_PCMCIA_CIS_PA: - GOTO_ERROR_ON(tuple.TupleDataLen != 9, + GOTO_ERROR_ON((tuple.TupleDataLen != 9) && + (tuple.TupleDataLen != 10), "pa tpl size"); sprom->pa0b0 = tuple.TupleData[1] | ((u16)tuple.TupleData[2] << 8); @@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus, sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; break; case SSB_PCMCIA_CIS_BFLAGS: - GOTO_ERROR_ON(tuple.TupleDataLen != 3, + GOTO_ERROR_ON((tuple.TupleDataLen != 3) && + (tuple.TupleDataLen != 5), "bfl tpl size"); sprom->boardflags_lo = tuple.TupleData[1] | ((u16)tuple.TupleData[2] << 8); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 38bfdb0..3f10459 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -550,7 +550,7 @@ static void acm_waker(struct work_struct *waker) static int acm_tty_open(struct tty_struct *tty, struct file *filp) { struct acm *acm; - int rv = -EINVAL; + int rv = -ENODEV; int i; dbg("Entering acm_tty_open."); @@ -677,7 +677,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) /* Perform the closing process and see if we need to do the hardware shutdown */ - if (tty_port_close_start(&acm->port, tty, filp) == 0) + if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0) return; acm_port_down(acm, 0); tty_port_close_end(&acm->port, tty); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index ce3f453..95ccfa0 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -648,7 +648,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) struct urb *urb; int length; unsigned long flags; - char buffer[4]; /* Any root hubs with > 31 ports? */ + char buffer[6]; /* Any root hubs with > 31 ports? */ if (unlikely(!hcd->rh_registered)) return; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1576a05..0c03471 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -337,10 +337,10 @@ config USB_R8A66597_HCD config SUPERH_ON_CHIP_R8A66597 boolean "Enable SuperH on-chip R8A66597 USB" - depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723) + depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724) help This driver enables support for the on-chip R8A66597 in the - SH7366 and SH7723 processors. + SH7366, SH7723 and SH7724 processors. config USB_WHCI_HCD tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index f8d9045..0f7a30b 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -1261,7 +1261,7 @@ static int mon_alloc_buff(struct mon_pgmap *map, int npages) return -ENOMEM; } map[n].ptr = (unsigned char *) vaddr; - map[n].pg = virt_to_page(vaddr); + map[n].pg = virt_to_page((void *) vaddr); } return 0; } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 3dc3768..5f08702 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2121,7 +2121,7 @@ static void ftdi_process_read(struct work_struct *work) /* Note that the error flag is duplicated for every character received since we don't know which character it applied to */ - if (!usb_serial_handle_sysrq_char(port, + if (!usb_serial_handle_sysrq_char(tty, port, data[packet_offset + i])) tty_insert_flip_char(tty, data[packet_offset + i], diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 932d624..ce57f6a 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -424,10 +424,17 @@ static void flush_and_resubmit_read_urb(struct usb_serial_port *port) if (!tty) goto done; - /* Push data to tty */ - for (i = 0; i < urb->actual_length; i++, ch++) { - if (!usb_serial_handle_sysrq_char(port, *ch)) - tty_insert_flip_char(tty, *ch, TTY_NORMAL); + /* The per character mucking around with sysrq path it too slow for + stuff like 3G modems, so shortcircuit it in the 99.9999999% of cases + where the USB serial is not a console anyway */ + if (!port->console || !port->sysrq) + tty_insert_flip_string(tty, ch, urb->actual_length); + else { + /* Push data to tty */ + for (i = 0; i < urb->actual_length; i++, ch++) { + if (!usb_serial_handle_sysrq_char(tty, port, *ch)) + tty_insert_flip_char(tty, *ch, TTY_NORMAL); + } } tty_flip_buffer_push(tty); tty_kref_put(tty); @@ -527,11 +534,12 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty) } } -int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch) +int usb_serial_handle_sysrq_char(struct tty_struct *tty, + struct usb_serial_port *port, unsigned int ch) { if (port->sysrq && port->console) { if (ch && time_before(jiffies, port->sysrq)) { - handle_sysrq(ch, tty_port_tty_get(&port->port)); + handle_sysrq(ch, tty); port->sysrq = 0; return 1; } diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index ec6c132..efaf59c 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -971,18 +971,46 @@ exit: __func__, retval); } +static void pl2303_push_data(struct tty_struct *tty, + struct usb_serial_port *port, struct urb *urb, + u8 line_status) +{ + unsigned char *data = urb->transfer_buffer; + /* get tty_flag from status */ + char tty_flag = TTY_NORMAL; + /* break takes precedence over parity, */ + /* which takes precedence over framing errors */ + if (line_status & UART_BREAK_ERROR) + tty_flag = TTY_BREAK; + else if (line_status & UART_PARITY_ERROR) + tty_flag = TTY_PARITY; + else if (line_status & UART_FRAME_ERROR) + tty_flag = TTY_FRAME; + dbg("%s - tty_flag = %d", __func__, tty_flag); + + tty_buffer_request_room(tty, urb->actual_length + 1); + /* overrun is special, not associated with a char */ + if (line_status & UART_OVERRUN_ERROR) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + if (port->console && port->sysrq) { + int i; + for (i = 0; i < urb->actual_length; ++i) + if (!usb_serial_handle_sysrq_char(tty, port, data[i])) + tty_insert_flip_char(tty, data[i], tty_flag); + } else + tty_insert_flip_string(tty, data, urb->actual_length); + tty_flip_buffer_push(tty); +} + static void pl2303_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct pl2303_private *priv = usb_get_serial_port_data(port); struct tty_struct *tty; - unsigned char *data = urb->transfer_buffer; unsigned long flags; - int i; int result; int status = urb->status; u8 line_status; - char tty_flag; dbg("%s - port %d", __func__, port->number); @@ -1010,10 +1038,7 @@ static void pl2303_read_bulk_callback(struct urb *urb) } usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); - - /* get tty_flag from status */ - tty_flag = TTY_NORMAL; + urb->actual_length, urb->transfer_buffer); spin_lock_irqsave(&priv->lock, flags); line_status = priv->line_status; @@ -1021,26 +1046,9 @@ static void pl2303_read_bulk_callback(struct urb *urb) spin_unlock_irqrestore(&priv->lock, flags); wake_up_interruptible(&priv->delta_msr_wait); - /* break takes precedence over parity, */ - /* which takes precedence over framing errors */ - if (line_status & UART_BREAK_ERROR) - tty_flag = TTY_BREAK; - else if (line_status & UART_PARITY_ERROR) - tty_flag = TTY_PARITY; - else if (line_status & UART_FRAME_ERROR) - tty_flag = TTY_FRAME; - dbg("%s - tty_flag = %d", __func__, tty_flag); - tty = tty_port_tty_get(&port->port); if (tty && urb->actual_length) { - tty_buffer_request_room(tty, urb->actual_length + 1); - /* overrun is special, not associated with a char */ - if (line_status & UART_OVERRUN_ERROR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - for (i = 0; i < urb->actual_length; ++i) - if (!usb_serial_handle_sysrq_char(port, data[i])) - tty_insert_flip_char(tty, data[i], tty_flag); - tty_flip_buffer_push(tty); + pl2303_push_data(tty, port, urb, line_status); } tty_kref_put(tty); /* Schedule the next read _if_ we are still open */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index d595aa5..a842164 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -333,6 +333,9 @@ static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __func__, port->number); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index f632c66..41296a6 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -616,6 +616,8 @@ config FB_STI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select STI_CONSOLE + select VT default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index fb8163d..a21efcd 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -226,9 +226,10 @@ static int clcdfb_set_par(struct fb_info *info) clcdfb_enable(fb, regs.cntl); #ifdef DEBUG - printk(KERN_INFO "CLCD: Registers set to\n" - KERN_INFO " %08x %08x %08x %08x\n" - KERN_INFO " %08x %08x %08x %08x\n", + printk(KERN_INFO + "CLCD: Registers set to\n" + " %08x %08x %08x %08x\n" + " %08x %08x %08x %08x\n", readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1), readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3), readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS), diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 018850c..8cd279b 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -2405,6 +2405,9 @@ static int do_fb_set_var(struct fb_var_screeninfo *var, int isactive) return 0; } +/* fbhw->encode_fix() must be called with fb_info->mm_lock held + * if it is called after the register_framebuffer() - not a case here + */ static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) { struct atafb_par par; @@ -2414,7 +2417,8 @@ static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) if (err) return err; memset(fix, 0, sizeof(struct fb_fix_screeninfo)); - return fbhw->encode_fix(fix, &par); + err = fbhw->encode_fix(fix, &par); + return err; } static int atafb_get_var(struct fb_var_screeninfo *var, struct fb_info *info) @@ -2743,7 +2747,9 @@ static int atafb_set_par(struct fb_info *info) /* Decode wanted screen parameters */ fbhw->decode_var(&info->var, par); + mutex_lock(&info->mm_lock); fbhw->encode_fix(&info->fix, par); + mutex_unlock(&info->mm_lock); /* Set new videomode */ ata_set_par(par); diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index adc5bf0..2830ffd 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -262,6 +262,9 @@ static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo) /** * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory * @sinfo: the frame buffer to allocate memory for + * + * This function is called only from the atmel_lcdfb_probe() + * so no locking by fb_info->mm_lock around smem_len setting is needed. */ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo) { diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h index 7691e73..1f39a62 100644 --- a/drivers/video/aty/atyfb.h +++ b/drivers/video/aty/atyfb.h @@ -187,6 +187,8 @@ struct atyfb_par { int mtrr_reg; #endif u32 mem_cntl; + struct crtc saved_crtc; + union aty_pll saved_pll; }; /* @@ -217,6 +219,7 @@ struct atyfb_par { #define M64F_XL_DLL 0x00080000 #define M64F_MFB_FORCE_4 0x00100000 #define M64F_HW_TRIPLE 0x00200000 +#define M64F_XL_MEM 0x00400000 /* * Register access */ diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 1207c20..63d3739 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -66,6 +66,8 @@ #include <linux/spinlock.h> #include <linux/wait.h> #include <linux/backlight.h> +#include <linux/reboot.h> +#include <linux/dmi.h> #include <asm/io.h> #include <linux/uaccess.h> @@ -249,8 +251,6 @@ static int aty_init(struct fb_info *info); static int store_video_par(char *videopar, unsigned char m64_num); #endif -static struct crtc saved_crtc; -static union aty_pll saved_pll; static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc); static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc); @@ -261,6 +261,8 @@ static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info); static int read_aty_sense(const struct atyfb_par *par); #endif +static DEFINE_MUTEX(reboot_lock); +static struct fb_info *reboot_info; /* * Interface used by the world @@ -361,8 +363,8 @@ static unsigned long phys_guiregbase[FB_MAX] __devinitdata = { 0, }; #define ATI_CHIP_264GTPRO (ATI_MODERN_SET | M64F_SDRAM_MAGIC_PLL | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D) #define ATI_CHIP_264LTPRO (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D) -#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4) -#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_MOBIL_BUS) +#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM) +#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM | M64F_MOBIL_BUS) static struct { u16 pci_id; @@ -539,6 +541,7 @@ static char ram_edo[] __devinitdata = "EDO"; static char ram_sdram[] __devinitdata = "SDRAM (1:1)"; static char ram_sgram[] __devinitdata = "SGRAM (1:1)"; static char ram_sdram32[] __devinitdata = "SDRAM (2:1) (32-bit)"; +static char ram_wram[] __devinitdata = "WRAM"; static char ram_off[] __devinitdata = "OFF"; #endif /* CONFIG_FB_ATY_CT */ @@ -553,6 +556,10 @@ static char *aty_gx_ram[8] __devinitdata = { #ifdef CONFIG_FB_ATY_CT static char *aty_ct_ram[8] __devinitdata = { ram_off, ram_dram, ram_edo, ram_edo, + ram_sdram, ram_sgram, ram_wram, ram_resv +}; +static char *aty_xl_ram[8] __devinitdata = { + ram_off, ram_dram, ram_edo, ram_edo, ram_sdram, ram_sgram, ram_sdram32, ram_resv }; #endif /* CONFIG_FB_ATY_CT */ @@ -760,6 +767,17 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc) #endif /* CONFIG_FB_ATY_GENERIC_LCD */ } +static u32 calc_line_length(struct atyfb_par *par, u32 vxres, u32 bpp) +{ + u32 line_length = vxres * bpp / 8; + + if (par->ram_type == SGRAM || + (!M64_HAS(XL_MEM) && par->ram_type == WRAM)) + line_length = (line_length + 63) & ~63; + + return line_length; +} + static int aty_var_to_crtc(const struct fb_info *info, const struct fb_var_screeninfo *var, struct crtc *crtc) { @@ -769,13 +787,14 @@ static int aty_var_to_crtc(const struct fb_info *info, u32 h_total, h_disp, h_sync_strt, h_sync_end, h_sync_dly, h_sync_wid, h_sync_pol; u32 v_total, v_disp, v_sync_strt, v_sync_end, v_sync_wid, v_sync_pol, c_sync; u32 pix_width, dp_pix_width, dp_chain_mask; + u32 line_length; /* input */ - xres = var->xres; + xres = (var->xres + 7) & ~7; yres = var->yres; - vxres = var->xres_virtual; + vxres = (var->xres_virtual + 7) & ~7; vyres = var->yres_virtual; - xoffset = var->xoffset; + xoffset = (var->xoffset + 7) & ~7; yoffset = var->yoffset; bpp = var->bits_per_pixel; if (bpp == 16) @@ -827,7 +846,9 @@ static int aty_var_to_crtc(const struct fb_info *info, } else FAIL("invalid bpp"); - if (vxres * vyres * bpp / 8 > info->fix.smem_len) + line_length = calc_line_length(par, vxres, bpp); + + if (vyres * line_length > info->fix.smem_len) FAIL("not enough video RAM"); h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1; @@ -969,7 +990,9 @@ static int aty_var_to_crtc(const struct fb_info *info, crtc->xoffset = xoffset; crtc->yoffset = yoffset; crtc->bpp = bpp; - crtc->off_pitch = ((yoffset*vxres+xoffset)*bpp/64) | (vxres<<19); + crtc->off_pitch = + ((yoffset * line_length + xoffset * bpp / 8) / 8) | + ((line_length / bpp) << 22); crtc->vline_crnt_vline = 0; crtc->h_tot_disp = h_total | (h_disp<<16); @@ -1394,7 +1417,9 @@ static int atyfb_set_par(struct fb_info *info) } aty_st_8(DAC_MASK, 0xff, par); - info->fix.line_length = var->xres_virtual * var->bits_per_pixel/8; + info->fix.line_length = calc_line_length(par, var->xres_virtual, + var->bits_per_pixel); + info->fix.visual = var->bits_per_pixel <= 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR; @@ -1505,10 +1530,12 @@ static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info) { u32 xoffset = info->var.xoffset; u32 yoffset = info->var.yoffset; - u32 vxres = par->crtc.vxres; + u32 line_length = info->fix.line_length; u32 bpp = info->var.bits_per_pixel; - par->crtc.off_pitch = ((yoffset * vxres + xoffset) * bpp / 64) | (vxres << 19); + par->crtc.off_pitch = + ((yoffset * line_length + xoffset * bpp / 8) / 8) | + ((line_length / bpp) << 22); } @@ -2201,7 +2228,7 @@ static void __devinit aty_calc_mem_refresh(struct atyfb_par *par, int xclk) const int *refresh_tbl; int i, size; - if (IS_XL(par->pci_id) || IS_MOBILITY(par->pci_id)) { + if (M64_HAS(XL_MEM)) { refresh_tbl = ragexl_tbl; size = ARRAY_SIZE(ragexl_tbl); } else { @@ -2335,7 +2362,10 @@ static int __devinit aty_init(struct fb_info *info) par->pll_ops = &aty_pll_ct; par->bus_type = PCI; par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07); - ramname = aty_ct_ram[par->ram_type]; + if (M64_HAS(XL_MEM)) + ramname = aty_xl_ram[par->ram_type]; + else + ramname = aty_ct_ram[par->ram_type]; /* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */ if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM) par->pll_limits.mclk = 63; @@ -2390,9 +2420,9 @@ static int __devinit aty_init(struct fb_info *info) #endif /* CONFIG_FB_ATY_CT */ /* save previous video mode */ - aty_get_crtc(par, &saved_crtc); + aty_get_crtc(par, &par->saved_crtc); if(par->pll_ops->get_pll) - par->pll_ops->get_pll(info, &saved_pll); + par->pll_ops->get_pll(info, &par->saved_pll); par->mem_cntl = aty_ld_le32(MEM_CNTL, par); gtb_memsize = M64_HAS(GTB_DSP); @@ -2667,8 +2697,8 @@ static int __devinit aty_init(struct fb_info *info) aty_init_exit: /* restore video mode */ - aty_set_crtc(par, &saved_crtc); - par->pll_ops->set_pll(info, &saved_pll); + aty_set_crtc(par, &par->saved_crtc); + par->pll_ops->set_pll(info, &par->saved_pll); #ifdef CONFIG_MTRR if (par->mtrr_reg >= 0) { @@ -3502,6 +3532,11 @@ static int __devinit atyfb_pci_probe(struct pci_dev *pdev, const struct pci_devi par->mmap_map[1].prot_flag = _PAGE_E; #endif /* __sparc__ */ + mutex_lock(&reboot_lock); + if (!reboot_info) + reboot_info = info; + mutex_unlock(&reboot_lock); + return 0; err_release_io: @@ -3614,8 +3649,8 @@ static void __devexit atyfb_remove(struct fb_info *info) struct atyfb_par *par = (struct atyfb_par *) info->par; /* restore video mode */ - aty_set_crtc(par, &saved_crtc); - par->pll_ops->set_pll(info, &saved_pll); + aty_set_crtc(par, &par->saved_crtc); + par->pll_ops->set_pll(info, &par->saved_pll); unregister_framebuffer(info); @@ -3661,6 +3696,11 @@ static void __devexit atyfb_pci_remove(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); + mutex_lock(&reboot_lock); + if (reboot_info == info) + reboot_info = NULL; + mutex_unlock(&reboot_lock); + atyfb_remove(info); } @@ -3808,6 +3848,56 @@ static int __init atyfb_setup(char *options) } #endif /* MODULE */ +static int atyfb_reboot_notify(struct notifier_block *nb, + unsigned long code, void *unused) +{ + struct atyfb_par *par; + + if (code != SYS_RESTART) + return NOTIFY_DONE; + + mutex_lock(&reboot_lock); + + if (!reboot_info) + goto out; + + if (!lock_fb_info(reboot_info)) + goto out; + + par = reboot_info->par; + + /* + * HP OmniBook 500's BIOS doesn't like the state of the + * hardware after atyfb has been used. Restore the hardware + * to the original state to allow successful reboots. + */ + aty_set_crtc(par, &par->saved_crtc); + par->pll_ops->set_pll(reboot_info, &par->saved_pll); + + unlock_fb_info(reboot_info); + out: + mutex_unlock(&reboot_lock); + + return NOTIFY_DONE; +} + +static struct notifier_block atyfb_reboot_notifier = { + .notifier_call = atyfb_reboot_notify, +}; + +static const struct dmi_system_id atyfb_reboot_ids[] = { + { + .ident = "HP OmniBook 500", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP OmniBook PC"), + DMI_MATCH(DMI_PRODUCT_VERSION, "HP OmniBook 500 FA"), + }, + }, + + { } +}; + static int __init atyfb_init(void) { int err1 = 1, err2 = 1; @@ -3826,11 +3916,20 @@ static int __init atyfb_init(void) err2 = atyfb_atari_probe(); #endif - return (err1 && err2) ? -ENODEV : 0; + if (err1 && err2) + return -ENODEV; + + if (dmi_check_system(atyfb_reboot_ids)) + register_reboot_notifier(&atyfb_reboot_notifier); + + return 0; } static void __exit atyfb_exit(void) { + if (dmi_check_system(atyfb_reboot_ids)) + unregister_reboot_notifier(&atyfb_reboot_notifier); + #ifdef CONFIG_PCI pci_unregister_driver(&atyfb_driver); #endif diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/aty/mach64_accel.c index 0cc9724..51fcc0a 100644 --- a/drivers/video/aty/mach64_accel.c +++ b/drivers/video/aty/mach64_accel.c @@ -63,14 +63,17 @@ static void reset_GTC_3D_engine(const struct atyfb_par *par) void aty_init_engine(struct atyfb_par *par, struct fb_info *info) { u32 pitch_value; + u32 vxres; /* determine modal information from global mode structure */ - pitch_value = info->var.xres_virtual; + pitch_value = info->fix.line_length / (info->var.bits_per_pixel / 8); + vxres = info->var.xres_virtual; if (info->var.bits_per_pixel == 24) { /* In 24 bpp, the engine is in 8 bpp - this requires that all */ /* horizontal coordinates and widths must be adjusted */ pitch_value *= 3; + vxres *= 3; } /* On GTC (RagePro), we need to reset the 3D engine before */ @@ -133,7 +136,7 @@ void aty_init_engine(struct atyfb_par *par, struct fb_info *info) aty_st_le32(SC_LEFT, 0, par); aty_st_le32(SC_TOP, 0, par); aty_st_le32(SC_BOTTOM, par->crtc.vyres - 1, par); - aty_st_le32(SC_RIGHT, pitch_value - 1, par); + aty_st_le32(SC_RIGHT, vxres - 1, par); /* set background color to minimum value (usually BLACK) */ aty_st_le32(DP_BKGD_CLR, 0, par); diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c index 1dae7f8..51422fc 100644 --- a/drivers/video/backlight/tdo24m.c +++ b/drivers/video/backlight/tdo24m.c @@ -356,7 +356,7 @@ static int __devinit tdo24m_probe(struct spi_device *spi) lcd->power = FB_BLANK_POWERDOWN; lcd->mode = MODE_VGA; /* default to VGA */ - lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL)); + lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, GFP_KERNEL); if (lcd->buf == NULL) { kfree(lcd); return -ENOMEM; diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c index 7bad24e..108b89e 100644 --- a/drivers/video/cobalt_lcdfb.c +++ b/drivers/video/cobalt_lcdfb.c @@ -1,7 +1,7 @@ /* * Cobalt server LCD frame buffer driver. * - * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index f8a09bf..53ea056 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1310,8 +1310,6 @@ static long fb_compat_ioctl(struct file *file, unsigned int cmd, static int fb_mmap(struct file *file, struct vm_area_struct * vma) -__acquires(&info->lock) -__releases(&info->lock) { int fbidx = iminor(file->f_path.dentry->d_inode); struct fb_info *info = registered_fb[fbidx]; @@ -1325,16 +1323,14 @@ __releases(&info->lock) off = vma->vm_pgoff << PAGE_SHIFT; if (!fb) return -ENODEV; + mutex_lock(&info->mm_lock); if (fb->fb_mmap) { int res; - mutex_lock(&info->lock); res = fb->fb_mmap(info, vma); - mutex_unlock(&info->lock); + mutex_unlock(&info->mm_lock); return res; } - mutex_lock(&info->lock); - /* frame buffer memory */ start = info->fix.smem_start; len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len); @@ -1342,13 +1338,13 @@ __releases(&info->lock) /* memory mapped io */ off -= len; if (info->var.accel_flags) { - mutex_unlock(&info->lock); + mutex_unlock(&info->mm_lock); return -EINVAL; } start = info->fix.mmio_start; len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len); } - mutex_unlock(&info->lock); + mutex_unlock(&info->mm_lock); start &= PAGE_MASK; if ((vma->vm_end - vma->vm_start + off) > len) return -EINVAL; @@ -1518,6 +1514,7 @@ register_framebuffer(struct fb_info *fb_info) break; fb_info->node = i; mutex_init(&fb_info->lock); + mutex_init(&fb_info->mm_lock); fb_info->dev = device_create(fb_class, fb_info->device, MKDEV(FB_MAJOR, i), NULL, "fb%d", i); diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index f153c58..72d68b3 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -750,24 +750,26 @@ static void update_lcdc(struct fb_info *info) static int map_video_memory(struct fb_info *info) { phys_addr_t phys; + u32 smem_len = info->fix.line_length * info->var.yres_virtual; pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual); pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual); pr_debug("info->fix.line_length = %d\n", info->fix.line_length); + pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len); - info->fix.smem_len = info->fix.line_length * info->var.yres_virtual; - pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len); - info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys); + info->screen_base = fsl_diu_alloc(smem_len, &phys); if (info->screen_base == NULL) { printk(KERN_ERR "Unable to allocate fb memory\n"); return -ENOMEM; } + mutex_lock(&info->mm_lock); info->fix.smem_start = (unsigned long) phys; + info->fix.smem_len = smem_len; + mutex_unlock(&info->mm_lock); info->screen_size = info->fix.smem_len; pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n", - info->fix.smem_start, - info->fix.smem_len); + info->fix.smem_start, info->fix.smem_len); pr_debug("screen base %p\n", info->screen_base); return 0; @@ -776,9 +778,11 @@ static int map_video_memory(struct fb_info *info) static void unmap_video_memory(struct fb_info *info) { fsl_diu_free(info->screen_base, info->fix.smem_len); + mutex_lock(&info->mm_lock); info->screen_base = NULL; info->fix.smem_start = 0; info->fix.smem_len = 0; + mutex_unlock(&info->mm_lock); } /* @@ -1219,12 +1223,6 @@ static int __devinit install_fb(struct fb_info *info) return -EINVAL; } - if (fsl_diu_set_par(info)) { - printk(KERN_ERR "fb_set_par failed"); - fb_dealloc_cmap(&info->cmap); - return -EINVAL; - } - if (register_framebuffer(info) < 0) { printk(KERN_ERR "register_framebuffer failed"); unmap_video_memory(info); diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c index 020db7f..e7116a6 100644 --- a/drivers/video/hitfb.c +++ b/drivers/video/hitfb.c @@ -44,9 +44,6 @@ static struct fb_fix_screeninfo hitfb_fix __initdata = { .accel = FB_ACCEL_NONE, }; -static u32 pseudo_palette[16]; -static struct fb_info fb_info; - static inline void hitfb_accel_wait(void) { while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ; @@ -331,6 +328,8 @@ static struct fb_ops hitfb_ops = { static int __init hitfb_probe(struct platform_device *dev) { unsigned short lcdclor, ldr3, ldvndr; + struct fb_info *info; + int ret; if (fb_get_options("hitfb", NULL)) return -ENODEV; @@ -384,32 +383,53 @@ static int __init hitfb_probe(struct platform_device *dev) break; } - fb_info.fbops = &hitfb_ops; - fb_info.var = hitfb_var; - fb_info.fix = hitfb_fix; - fb_info.pseudo_palette = pseudo_palette; - fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN | + info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev); + if (unlikely(!info)) + return -ENOMEM; + + info->fbops = &hitfb_ops; + info->var = hitfb_var; + info->fix = hitfb_fix; + info->pseudo_palette = info->par; + info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN | FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA; - fb_info.screen_base = (void *)hitfb_fix.smem_start; + info->screen_base = (void *)hitfb_fix.smem_start; - fb_alloc_cmap(&fb_info.cmap, 256, 0); + ret = fb_alloc_cmap(&info->cmap, 256, 0); + if (unlikely(ret < 0)) + goto err_fb; - if (register_framebuffer(&fb_info) < 0) - return -EINVAL; + ret = register_framebuffer(info); + if (unlikely(ret < 0)) + goto err; + + platform_set_drvdata(dev, info); printk(KERN_INFO "fb%d: %s frame buffer device\n", - fb_info.node, fb_info.fix.id); + info->node, info->fix.id); + return 0; + +err: + fb_dealloc_cmap(&info->cmap); +err_fb: + framebuffer_release(info); + return ret; } static int __exit hitfb_remove(struct platform_device *dev) { - return unregister_framebuffer(&fb_info); + struct fb_info *info = platform_get_drvdata(dev); + + unregister_framebuffer(info); + fb_dealloc_cmap(&info->cmap); + framebuffer_release(info); + + return 0; } -#ifdef CONFIG_PM -static int hitfb_suspend(struct platform_device *dev, pm_message_t state) +static int hitfb_suspend(struct device *dev) { u16 v; @@ -421,7 +441,7 @@ static int hitfb_suspend(struct platform_device *dev, pm_message_t state) return 0; } -static int hitfb_resume(struct platform_device *dev) +static int hitfb_resume(struct device *dev) { u16 v; @@ -435,17 +455,19 @@ static int hitfb_resume(struct platform_device *dev) return 0; } -#endif + +static struct dev_pm_ops hitfb_dev_pm_ops = { + .suspend = hitfb_suspend, + .resume = hitfb_resume, +}; static struct platform_driver hitfb_driver = { .probe = hitfb_probe, .remove = __exit_p(hitfb_remove), -#ifdef CONFIG_PM - .suspend = hitfb_suspend, - .resume = hitfb_resume, -#endif .driver = { .name = "hitfb", + .owner = THIS_MODULE, + .pm = &hitfb_dev_pm_ops, }, }; diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c index 2e94019..5743ea2 100644 --- a/drivers/video/i810/i810_main.c +++ b/drivers/video/i810/i810_main.c @@ -1090,8 +1090,10 @@ static int encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) memset(fix, 0, sizeof(struct fb_fix_screeninfo)); strcpy(fix->id, "I810"); + mutex_lock(&info->mm_lock); fix->smem_start = par->fb.physical; fix->smem_len = par->fb.size; + mutex_unlock(&info->mm_lock); fix->type = FB_TYPE_PACKED_PIXELS; fix->type_aux = 0; fix->xpanstep = 8; @@ -2058,8 +2060,7 @@ static int __devinit i810fb_init_pci (struct pci_dev *dev, fb_var_to_videomode(&mode, &info->var); fb_add_videomode(&mode, &info->modelist); - encode_fix(&info->fix, info); - + i810fb_init_ringbuffer(info); err = register_framebuffer(info); diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/matrox/matroxfb_DAC1064.c index 0ce3b0a..a74e5da 100644 --- a/drivers/video/matrox/matroxfb_DAC1064.c +++ b/drivers/video/matrox/matroxfb_DAC1064.c @@ -454,9 +454,9 @@ static void DAC1064_restore_2(WPMINFO2) { dprintk(KERN_DEBUG "DAC1064regs "); for (i = 0; i < sizeof(MGA1064_DAC_regs); i++) { dprintk("R%02X=%02X ", MGA1064_DAC_regs[i], ACCESS_FBINFO(hw).DACreg[i]); - if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... "); + if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... "); } - dprintk("\n" KERN_DEBUG "DAC1064clk "); + dprintk(KERN_DEBUG "DAC1064clk "); for (i = 0; i < 6; i++) dprintk("C%02X=%02X ", i, ACCESS_FBINFO(hw).DACclk[i]); dprintk("\n"); diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c index 1352482..4e82511 100644 --- a/drivers/video/matrox/matroxfb_Ti3026.c +++ b/drivers/video/matrox/matroxfb_Ti3026.c @@ -651,9 +651,9 @@ static void Ti3026_restore(WPMINFO2) { dprintk(KERN_DEBUG "3026DACregs "); for (i = 0; i < 21; i++) { dprintk("R%02X=%02X ", DACseq[i], hw->DACreg[i]); - if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... "); + if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... "); } - dprintk("\n" KERN_DEBUG "DACclk "); + dprintk(KERN_DEBUG "DACclk "); for (i = 0; i < 6; i++) dprintk("C%02X=%02X ", i, hw->DACclk[i]); dprintk("\n"); diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c index 8e7a275..0c1049b 100644 --- a/drivers/video/matrox/matroxfb_base.c +++ b/drivers/video/matrox/matroxfb_base.c @@ -724,8 +724,10 @@ static void matroxfb_update_fix(WPMINFO2) struct fb_fix_screeninfo *fix = &ACCESS_FBINFO(fbcon).fix; DBG(__func__) + mutex_lock(&ACCESS_FBINFO(fbcon).mm_lock); fix->smem_start = ACCESS_FBINFO(video.base) + ACCESS_FBINFO(curr.ydstorg.bytes); fix->smem_len = ACCESS_FBINFO(video.len_usable) - ACCESS_FBINFO(curr.ydstorg.bytes); + mutex_unlock(&ACCESS_FBINFO(fbcon).mm_lock); } static int matroxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) @@ -1874,7 +1876,6 @@ static int initMatrox2(WPMINFO struct board* b){ } matroxfb_init_fix(PMINFO2); ACCESS_FBINFO(fbcon.screen_base) = vaddr_va(ACCESS_FBINFO(video.vbase)); - matroxfb_update_fix(PMINFO2); /* Normalize values (namely yres_virtual) */ matroxfb_check_var(&vesafb_defined, &ACCESS_FBINFO(fbcon)); /* And put it into "current" var. Do NOT program hardware yet, or we'll not take over @@ -2081,6 +2082,7 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm spin_lock_init(&ACCESS_FBINFO(lock.accel)); init_rwsem(&ACCESS_FBINFO(crtc2.lock)); init_rwsem(&ACCESS_FBINFO(altout.lock)); + mutex_init(&ACCESS_FBINFO(fbcon).mm_lock); ACCESS_FBINFO(irq_flags) = 0; init_waitqueue_head(&ACCESS_FBINFO(crtc1.vsync.wait)); init_waitqueue_head(&ACCESS_FBINFO(crtc2.vsync.wait)); diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c index 7ac4c5f..ebcb5c6 100644 --- a/drivers/video/matrox/matroxfb_crtc2.c +++ b/drivers/video/matrox/matroxfb_crtc2.c @@ -289,7 +289,12 @@ static int matroxfb_dh_release(struct fb_info* info, int user) { #undef m2info } -static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) { +/* + * This function is called before the register_framebuffer so + * no locking is needed. + */ +static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) +{ struct fb_fix_screeninfo *fix = &m2info->fbcon.fix; strcpy(fix->id, "MATROX DH"); diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index b7af525..f8778cd 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -669,7 +669,7 @@ static uint32_t bpp_to_pixfmt(int bpp) } static int mx3fb_blank(int blank, struct fb_info *fbi); -static int mx3fb_map_video_memory(struct fb_info *fbi); +static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len); static int mx3fb_unmap_video_memory(struct fb_info *fbi); /** @@ -742,8 +742,7 @@ static int mx3fb_set_par(struct fb_info *fbi) if (fbi->fix.smem_start) mx3fb_unmap_video_memory(fbi); - fbi->fix.smem_len = mem_len; - if (mx3fb_map_video_memory(fbi) < 0) { + if (mx3fb_map_video_memory(fbi, mem_len) < 0) { mutex_unlock(&mx3_fbi->mutex); return -ENOMEM; } @@ -1198,6 +1197,7 @@ static int mx3fb_resume(struct platform_device *pdev) /** * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. * @fbi: framebuffer information pointer + * @mem_len: length of mapped memory * @return: Error code indicating success or failure * * This buffer is remapped into a non-cached, non-buffered, memory region to @@ -1205,23 +1205,26 @@ static int mx3fb_resume(struct platform_device *pdev) * area is remapped, all virtual memory access to the video memory should occur * at the new region. */ -static int mx3fb_map_video_memory(struct fb_info *fbi) +static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len) { int retval = 0; dma_addr_t addr; fbi->screen_base = dma_alloc_writecombine(fbi->device, - fbi->fix.smem_len, + mem_len, &addr, GFP_DMA); if (!fbi->screen_base) { dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", - fbi->fix.smem_len); + mem_len); retval = -EBUSY; goto err0; } + mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = addr; + fbi->fix.smem_len = mem_len; + mutex_unlock(&fbi->mm_lock); dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); @@ -1251,8 +1254,10 @@ static int mx3fb_unmap_video_memory(struct fb_info *fbi) fbi->screen_base, fbi->fix.smem_start); fbi->screen_base = 0; + mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = 0; fbi->fix.smem_len = 0; + mutex_unlock(&fbi->mm_lock); return 0; } @@ -1360,11 +1365,6 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) init_completion(&mx3fbi->flip_cmpl); disable_irq(ichan->eof_irq); dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); - ret = mx3fb_set_par(fbi); - if (ret < 0) - goto esetpar; - - mx3fb_blank(FB_BLANK_UNBLANK, fbi); dev_info(dev, "registered, using mode %s\n", fb_mode); diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 060d72f..4ea99bf 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -393,8 +393,10 @@ static void set_fb_fix(struct fb_info *fbi) rg = &plane->fbdev->mem_desc.region[plane->idx]; fbi->screen_base = rg->vaddr; + mutex_lock(&fbi->mm_lock); fix->smem_start = rg->paddr; fix->smem_len = rg->size; + mutex_unlock(&fbi->mm_lock); fix->type = FB_TYPE_PACKED_PIXELS; bpp = var->bits_per_pixel; @@ -886,8 +888,10 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) * plane memory is dealloce'd, the other * screen parameters in var / fix are invalid. */ + mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = 0; fbi->fix.smem_len = 0; + mutex_unlock(&fbi->mm_lock); } } } diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c index 03b3670..bacfabd 100644 --- a/drivers/video/platinumfb.c +++ b/drivers/video/platinumfb.c @@ -141,7 +141,9 @@ static int platinumfb_set_par (struct fb_info *info) offset = 0x10; info->screen_base = pinfo->frame_buffer + init->fb_offset + offset; + mutex_lock(&info->mm_lock); info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset; + mutex_unlock(&info->mm_lock); info->fix.visual = (pinfo->cmode == CMODE_8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR; info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode) diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 0889d50..6506117 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -815,8 +815,10 @@ static int overlayfb_map_video_memory(struct pxafb_layer *ofb) ofb->video_mem_phys = virt_to_phys(ofb->video_mem); ofb->video_mem_size = size; + mutex_lock(&ofb->fb.mm_lock); ofb->fb.fix.smem_start = ofb->video_mem_phys; ofb->fb.fix.smem_len = ofb->fb.fix.line_length * var->yres_virtual; + mutex_unlock(&ofb->fb.mm_lock); ofb->fb.screen_base = ofb->video_mem; return 0; } diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index 43680e5..bb63c07 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -211,23 +211,21 @@ static int s3c_fb_check_var(struct fb_var_screeninfo *var, /** * s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock. + * @id: window id. * @sfb: The hardware state. * @pixclock: The pixel clock wanted, in picoseconds. * * Given the specified pixel clock, work out the necessary divider to get * close to the output frequency. */ -static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk) +static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk) { + struct s3c_fb_pd_win *win = sfb->pdata->win[id]; unsigned long clk = clk_get_rate(sfb->bus_clk); - unsigned long long tmp; unsigned int result; - tmp = (unsigned long long)clk; - tmp *= pixclk; - - do_div(tmp, 1000000000UL); - result = (unsigned int)tmp / 1000; + pixclk *= win->win_mode.refresh; + result = clk / pixclk; dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n", pixclk, clk, result, clk / result); @@ -267,6 +265,7 @@ static int s3c_fb_set_par(struct fb_info *info) struct s3c_fb *sfb = win->parent; void __iomem *regs = sfb->regs; int win_no = win->index; + u32 osdc_data = 0; u32 data; u32 pagewidth; int clkdiv; @@ -302,7 +301,7 @@ static int s3c_fb_set_par(struct fb_info *info) /* use window 0 as the basis for the lcd output timings */ if (win_no == 0) { - clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock); + clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock); data = sfb->pdata->vidcon0; data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR); @@ -359,8 +358,6 @@ static int s3c_fb_set_par(struct fb_info *info) data = var->xres * var->yres; - u32 osdc_data = 0; - osdc_data = VIDISD14C_ALPHA1_R(0xf) | VIDISD14C_ALPHA1_G(0xf) | VIDISD14C_ALPHA1_B(0xf); diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c index 653bdfe..9f6d6e6 100644 --- a/drivers/video/sh7760fb.c +++ b/drivers/video/sh7760fb.c @@ -120,18 +120,6 @@ static int sh7760_setcolreg (u_int regno, return 0; } -static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info, - unsigned long stride) -{ - memset(fix, 0, sizeof(struct fb_fix_screeninfo)); - strcpy(fix->id, "sh7760-lcdc"); - - fix->smem_start = (unsigned long)info->screen_base; - fix->smem_len = info->screen_size; - - fix->line_length = stride; -} - static int sh7760fb_get_color_info(struct device *dev, u16 lddfr, int *bpp, int *gray) { @@ -334,7 +322,8 @@ static int sh7760fb_set_par(struct fb_info *info) iowrite32(ldsarl, par->base + LDSARL); /* mem for lower half of DSTN */ - encode_fix(&info->fix, info, stride); + info->fix.line_length = stride; + sh7760fb_check_var(&info->var, info); sh7760fb_blank(FB_BLANK_UNBLANK, info); /* panel on! */ @@ -435,6 +424,8 @@ static int sh7760fb_alloc_mem(struct fb_info *info) info->screen_base = fbmem; info->screen_size = vram; + info->fix.smem_start = (unsigned long)info->screen_base; + info->fix.smem_len = info->screen_size; return 0; } @@ -520,6 +511,8 @@ static int __devinit sh7760fb_probe(struct platform_device *pdev) info->var.transp.length = 0; info->var.transp.msb_right = 0; + strcpy(info->fix.id, "sh7760-lcdc"); + /* set the DON2 bit now, before cmap allocation, as it will randomize * palette memory. */ diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index f10d2fb..8f24564 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/interrupt.h> +#include <linux/vmalloc.h> #include <video/sh_mobile_lcdc.h> #include <asm/atomic.h> @@ -30,9 +31,10 @@ struct sh_mobile_lcdc_chan { unsigned long enabled; /* ME and SE in LDCNT2R */ struct sh_mobile_lcdc_chan_cfg cfg; u32 pseudo_palette[PALETTE_NR]; - struct fb_info info; + struct fb_info *info; dma_addr_t dma_handle; struct fb_deferred_io defio; + struct scatterlist *sglist; unsigned long frame_end; wait_queue_head_t frame_end_wait; }; @@ -206,16 +208,38 @@ static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv) {} static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) {} #endif +static int sh_mobile_lcdc_sginit(struct fb_info *info, + struct list_head *pagelist) +{ + struct sh_mobile_lcdc_chan *ch = info->par; + unsigned int nr_pages_max = info->fix.smem_len >> PAGE_SHIFT; + struct page *page; + int nr_pages = 0; + + sg_init_table(ch->sglist, nr_pages_max); + + list_for_each_entry(page, pagelist, lru) + sg_set_page(&ch->sglist[nr_pages++], page, PAGE_SIZE, 0); + + return nr_pages; +} + static void sh_mobile_lcdc_deferred_io(struct fb_info *info, struct list_head *pagelist) { struct sh_mobile_lcdc_chan *ch = info->par; + unsigned int nr_pages; /* enable clocks before accessing hardware */ sh_mobile_lcdc_clk_on(ch->lcdc); + nr_pages = sh_mobile_lcdc_sginit(info, pagelist); + dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); + /* trigger panel update */ lcdc_write_chan(ch, LDSM2R, 1); + + dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); } static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info) @@ -418,22 +442,22 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) /* set bpp format in PKF[4:0] */ tmp = lcdc_read_chan(ch, LDDFR); tmp &= ~(0x0001001f); - tmp |= (priv->ch[k].info.var.bits_per_pixel == 16) ? 3 : 0; + tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0; lcdc_write_chan(ch, LDDFR, tmp); /* point out our frame buffer */ - lcdc_write_chan(ch, LDSA1R, ch->info.fix.smem_start); + lcdc_write_chan(ch, LDSA1R, ch->info->fix.smem_start); /* set line size */ - lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length); + lcdc_write_chan(ch, LDMLSR, ch->info->fix.line_length); /* setup deferred io if SYS bus */ tmp = ch->cfg.sys_bus_cfg.deferred_io_msec; if (ch->ldmt1r_value & (1 << 12) && tmp) { ch->defio.deferred_io = sh_mobile_lcdc_deferred_io; ch->defio.delay = msecs_to_jiffies(tmp); - ch->info.fbdefio = &ch->defio; - fb_deferred_io_init(&ch->info); + ch->info->fbdefio = &ch->defio; + fb_deferred_io_init(ch->info); /* one-shot mode */ lcdc_write_chan(ch, LDSM1R, 1); @@ -479,12 +503,12 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) * flush frame, and wait for frame end interrupt * clean up deferred io and enable clock */ - if (ch->info.fbdefio) { + if (ch->info->fbdefio) { ch->frame_end = 0; - schedule_delayed_work(&ch->info.deferred_work, 0); + schedule_delayed_work(&ch->info->deferred_work, 0); wait_event(ch->frame_end_wait, ch->frame_end); - fb_deferred_io_cleanup(&ch->info); - ch->info.fbdefio = NULL; + fb_deferred_io_cleanup(ch->info); + ch->info->fbdefio = NULL; sh_mobile_lcdc_clk_on(priv); } @@ -793,9 +817,16 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev) priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1); for (i = 0; i < j; i++) { - info = &priv->ch[i].info; cfg = &priv->ch[i].cfg; + priv->ch[i].info = framebuffer_alloc(0, &pdev->dev); + if (!priv->ch[i].info) { + dev_err(&pdev->dev, "unable to allocate fb_info\n"); + error = -ENOMEM; + break; + } + + info = priv->ch[i].info; info->fbops = &sh_mobile_lcdc_ops; info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres; info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres; @@ -846,21 +877,31 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev) } for (i = 0; i < j; i++) { - error = register_framebuffer(&priv->ch[i].info); + struct sh_mobile_lcdc_chan *ch = priv->ch + i; + + info = ch->info; + + if (info->fbdefio) { + priv->ch->sglist = vmalloc(sizeof(struct scatterlist) * + info->fix.smem_len >> PAGE_SHIFT); + if (!priv->ch->sglist) { + dev_err(&pdev->dev, "cannot allocate sglist\n"); + goto err1; + } + } + + error = register_framebuffer(info); if (error < 0) goto err1; - } - for (i = 0; i < j; i++) { - info = &priv->ch[i].info; dev_info(info->dev, "registered %s/%s as %dx%d %dbpp.\n", pdev->name, - (priv->ch[i].cfg.chan == LCDC_CHAN_MAINLCD) ? + (ch->cfg.chan == LCDC_CHAN_MAINLCD) ? "mainlcd" : "sublcd", - (int) priv->ch[i].cfg.lcd_cfg.xres, - (int) priv->ch[i].cfg.lcd_cfg.yres, - priv->ch[i].cfg.bpp); + (int) ch->cfg.lcd_cfg.xres, + (int) ch->cfg.lcd_cfg.yres, + ch->cfg.bpp); /* deferred io mode: disable clock to save power */ if (info->fbdefio) @@ -881,20 +922,24 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev) int i; for (i = 0; i < ARRAY_SIZE(priv->ch); i++) - if (priv->ch[i].info.dev) - unregister_framebuffer(&priv->ch[i].info); + if (priv->ch[i].info->dev) + unregister_framebuffer(priv->ch[i].info); sh_mobile_lcdc_stop(priv); for (i = 0; i < ARRAY_SIZE(priv->ch); i++) { - info = &priv->ch[i].info; + info = priv->ch[i].info; - if (!info->device) + if (!info || !info->device) continue; + if (priv->ch[i].sglist) + vfree(priv->ch[i].sglist); + dma_free_coherent(&pdev->dev, info->fix.smem_len, info->screen_base, priv->ch[i].dma_handle); fb_dealloc_cmap(&info->cmap); + framebuffer_release(info); } #ifdef CONFIG_HAVE_CLK diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index 7072d19..4a067f0 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -1847,8 +1847,10 @@ sisfb_get_fix(struct fb_fix_screeninfo *fix, int con, struct fb_info *info) strcpy(fix->id, ivideo->myid); + mutex_lock(&info->mm_lock); fix->smem_start = ivideo->video_base + ivideo->video_offset; fix->smem_len = ivideo->sisfb_mem; + mutex_unlock(&info->mm_lock); fix->type = FB_TYPE_PACKED_PIXELS; fix->type_aux = 0; fix->visual = (ivideo->video_bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; @@ -6365,7 +6367,6 @@ error_3: vfree(ivideo->bios_abase); sis_fb_info->fix = ivideo->sisfb_fix; sis_fb_info->screen_base = ivideo->video_vbase + ivideo->video_offset; sis_fb_info->fbops = &sisfb_ops; - sisfb_get_fix(&sis_fb_info->fix, -1, sis_fb_info); sis_fb_info->pseudo_palette = ivideo->pseudo_palette; fb_alloc_cmap(&sis_fb_info->cmap, 256 , 0); diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index eb5d73a..924d794 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -145,7 +145,7 @@ static inline void sm501fb_sync_regs(struct sm501fb_info *info) #define SM501_MEMF_ACCEL (8) static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, - unsigned int why, size_t size) + unsigned int why, size_t size, u32 smem_len) { struct sm501fb_par *par; struct fb_info *fbi; @@ -172,7 +172,7 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, if (ptr > 0) ptr &= ~(PAGE_SIZE - 1); - if (fbi && ptr < fbi->fix.smem_len) + if (fbi && ptr < smem_len) return -ENOMEM; break; @@ -197,7 +197,7 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem, case SM501_MEMF_ACCEL: fbi = inf->fb[HEAD_CRT]; - ptr = fbi ? fbi->fix.smem_len : 0; + ptr = fbi ? smem_len : 0; fbi = inf->fb[HEAD_PANEL]; if (fbi) { @@ -413,6 +413,7 @@ static int sm501fb_set_par_common(struct fb_info *info, unsigned int mem_type; unsigned int clock_type; unsigned int head_addr; + unsigned int smem_len; dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n", __func__, var->xres, var->yres, var->bits_per_pixel, @@ -453,18 +454,20 @@ static int sm501fb_set_par_common(struct fb_info *info, /* allocate fb memory within 501 */ info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8; - info->fix.smem_len = info->fix.line_length * var->yres_virtual; + smem_len = info->fix.line_length * var->yres_virtual; dev_dbg(fbi->dev, "%s: line length = %u\n", __func__, info->fix.line_length); - if (sm501_alloc_mem(fbi, &par->screen, mem_type, - info->fix.smem_len)) { + if (sm501_alloc_mem(fbi, &par->screen, mem_type, smem_len, smem_len)) { dev_err(fbi->dev, "no memory available\n"); return -ENOMEM; } + mutex_lock(&info->mm_lock); info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr; + info->fix.smem_len = smem_len; + mutex_unlock(&info->mm_lock); info->screen_base = fbi->fbmem + par->screen.sm_addr; info->screen_size = info->fix.smem_len; @@ -637,7 +640,8 @@ static int sm501fb_set_par_crt(struct fb_info *info) if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) { /* the head is displaying panel data... */ - sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0); + sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0, + info->fix.smem_len); goto out_update; } @@ -1289,7 +1293,8 @@ static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base) par->cursor_regs = info->regs + reg_base; - ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024); + ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024, + fbi->fix.smem_len); if (ret < 0) return ret; @@ -1535,9 +1540,6 @@ static int sm501fb_init_fb(struct fb_info *fb, if (ret) dev_err(info->dev, "check_var() failed on initial setup?\n"); - /* ensure we've activated our new configuration */ - (fb->fbops->fb_set_par)(fb); - return 0; } @@ -1619,6 +1621,8 @@ static int __devinit sm501fb_start_one(struct sm501fb_info *info, if (!fbi) return 0; + mutex_init(&info->fb[head]->mm_lock); + ret = sm501fb_init_fb(info->fb[head], head, drvname); if (ret) { dev_err(info->dev, "cannot initialise fb %s\n", drvname); diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c index eec9dcb..6120f0c 100644 --- a/drivers/video/stifb.c +++ b/drivers/video/stifb.c @@ -1115,10 +1115,9 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) if the device name contains the string "DX" and tell the user how to reconfigure the card. */ if (strstr(sti->outptr.dev_name, "DX")) { - printk(KERN_WARNING "WARNING: stifb framebuffer driver does not " - "support '%s' in double-buffer mode.\n" - KERN_WARNING "WARNING: Please disable the double-buffer mode " - "in IPL menu (the PARISC-BIOS).\n", + printk(KERN_WARNING +"WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n" +"WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n", sti->outptr.dev_name); goto out_err0; } diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index d0674f1..2376f68 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -523,6 +523,7 @@ static int w100fb_set_par(struct fb_info *info) info->fix.ywrapstep = 0; info->fix.line_length = par->xres * BITS_PER_PIXEL / 8; + mutex_lock(&info->mm_lock); if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) { par->extmem_active = 1; info->fix.smem_len = par->mach->mem->size+1; @@ -530,6 +531,7 @@ static int w100fb_set_par(struct fb_info *info) par->extmem_active = 0; info->fix.smem_len = MEM_INT_SIZE+1; } + mutex_unlock(&info->mm_lock); w100fb_activate_var(par); } @@ -746,8 +748,6 @@ int __init w100fb_probe(struct platform_device *pdev) goto out; } - w100fb_set_par(info); - if (register_framebuffer(info) < 0) { err = -EINVAL; goto out; diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig index f654221..a9efb16 100644 --- a/drivers/vlynq/Kconfig +++ b/drivers/vlynq/Kconfig @@ -13,7 +13,7 @@ config VLYNQ config VLYNQ_DEBUG bool "VLYNQ bus debug" - depends on VLYNQ && KERNEL_DEBUG + depends on VLYNQ && DEBUG_KERNEL help Turn on VLYNQ bus debugging. diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c index 7335433..f05d2a3 100644 --- a/drivers/vlynq/vlynq.c +++ b/drivers/vlynq/vlynq.c @@ -76,7 +76,7 @@ struct vlynq_regs { u32 int_device[8]; }; -#ifdef VLYNQ_DEBUG +#ifdef CONFIG_VLYNQ_DEBUG static void vlynq_dump_regs(struct vlynq_device *dev) { int i; diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c index 5c7011c..751c003 100644 --- a/drivers/watchdog/bcm47xx_wdt.c +++ b/drivers/watchdog/bcm47xx_wdt.c @@ -161,7 +161,7 @@ static long bcm47xx_wdt_ioctl(struct file *file, { void __user *argp = (void __user *)arg; int __user *p = argp; - int new_value, retval = -EINVAL;; + int new_value, retval = -EINVAL; switch (cmd) { case WDIOC_GETSUPPORT: diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index ee1caae..0162454 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -38,7 +38,7 @@ static unsigned long oscr_freq; static unsigned long sa1100wdt_users; -static int pre_margin; +static unsigned int pre_margin; static int boot_status; /* @@ -84,6 +84,7 @@ static const struct watchdog_info ident = { .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, .identity = "SA1100/PXA255 Watchdog", + .firmware_version = 1, }; static long sa1100dog_ioctl(struct file *file, unsigned int cmd, @@ -118,7 +119,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd, if (ret) break; - if (time <= 0 || time > 255) { + if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) { ret = -EINVAL; break; } diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 916890a..f201acc 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -89,6 +89,11 @@ static void w83627hf_select_wd_register(void) c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */ outb_p(0x2b, WDT_EFER); outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */ + } else if (c == 0x88) { /* W83627EHF */ + outb_p(0x2d, WDT_EFER); /* select GPIO5 */ + c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */ + outb_p(0x2d, WDT_EFER); + outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */ } outb_p(0x07, WDT_EFER); /* point to logical device number reg */ diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c index 883b5f7..a6c12de 100644 --- a/drivers/watchdog/w83697ug_wdt.c +++ b/drivers/watchdog/w83697ug_wdt.c @@ -149,8 +149,10 @@ static void wdt_ctrl(int timeout) { spin_lock(&io_lock); - if (w83697ug_select_wd_register() < 0) + if (w83697ug_select_wd_register() < 0) { + spin_unlock(&io_lock); return; + } outb_p(0xF4, WDT_EFER); /* Select CRF4 */ outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */ diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index a4fe7a3..3bde56b 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -218,16 +218,14 @@ static void wdrtas_timer_keepalive(void) */ static int wdrtas_get_temperature(void) { - long result; + int result; int temperature = 0; - result = rtas_call(wdrtas_token_get_sensor_state, 2, 2, - (void *)__pa(&temperature), - WDRTAS_THERMAL_SENSOR, 0); + result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature); if (result < 0) printk(KERN_WARNING "wdrtas: reading the thermal sensor " - "faild: %li\n", result); + "failed: %i\n", result); else temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */ diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 891d2e9..abad71b 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -927,9 +927,9 @@ static struct irq_chip xen_dynamic_chip __read_mostly = { void __init xen_init_IRQ(void) { int i; - size_t size = nr_cpu_ids * sizeof(struct cpu_evtchn_s); - cpu_evtchn_mask_p = alloc_bootmem(size); + cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s), + GFP_KERNEL); BUG_ON(cpu_evtchn_mask_p == NULL); init_evtchn_cpu_bindings(); |