diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/i2c/busses/i2c-pxa.c | 241 | ||||
-rw-r--r-- | drivers/mmc/at91_mci.c | 46 | ||||
-rw-r--r-- | drivers/serial/Kconfig | 3 | ||||
-rw-r--r-- | drivers/serial/atmel_serial.c | 3 | ||||
-rw-r--r-- | drivers/serial/imx.c | 14 | ||||
-rw-r--r-- | drivers/usb/gadget/at91_udc.c | 4 | ||||
-rw-r--r-- | drivers/usb/gadget/pxa2xx_udc.c | 16 | ||||
-rw-r--r-- | drivers/usb/gadget/pxa2xx_udc.h | 15 |
8 files changed, 207 insertions, 135 deletions
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index c3b1567..14e83d0 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -34,6 +34,7 @@ #include <asm/hardware.h> #include <asm/irq.h> +#include <asm/io.h> #include <asm/arch/i2c.h> #include <asm/arch/pxa-regs.h> @@ -54,8 +55,21 @@ struct pxa_i2c { unsigned int irqlogidx; u32 isrlog[32]; u32 icrlog[32]; + + void __iomem *reg_base; + + unsigned long iobase; + unsigned long iosize; + + int irq; }; +#define _IBMR(i2c) ((i2c)->reg_base + 0) +#define _IDBR(i2c) ((i2c)->reg_base + 8) +#define _ICR(i2c) ((i2c)->reg_base + 0x10) +#define _ISR(i2c) ((i2c)->reg_base + 0x18) +#define _ISAR(i2c) ((i2c)->reg_base + 0x20) + /* * I2C Slave mode address */ @@ -130,7 +144,8 @@ static unsigned int i2c_debug = DEBUG; static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname) { - dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, ISR, ICR, IBMR); + dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, + readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); } #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __FUNCTION__) @@ -153,7 +168,7 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) printk("i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n", i2c->msg_num, i2c->msg_idx, i2c->msg_ptr); printk("i2c: ICR: %08x ISR: %08x\n" - "i2c: log: ", ICR, ISR); + "i2c: log: ", readl(_ICR(i2c)), readl(_ISR(i2c))); for (i = 0; i < i2c->irqlogidx; i++) printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); printk("\n"); @@ -161,7 +176,7 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) { - return !(ICR & ICR_SCLE); + return !(readl(_ICR(i2c)) & ICR_SCLE); } static void i2c_pxa_abort(struct pxa_i2c *i2c) @@ -173,28 +188,29 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c) return; } - while (time_before(jiffies, timeout) && (IBMR & 0x1) == 0) { - unsigned long icr = ICR; + while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) { + unsigned long icr = readl(_ICR(i2c)); icr &= ~ICR_START; icr |= ICR_ACKNAK | ICR_STOP | ICR_TB; - ICR = icr; + writel(icr, _ICR(i2c)); show_state(i2c); msleep(1); } - ICR &= ~(ICR_MA | ICR_START | ICR_STOP); + writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP), + _ICR(i2c)); } static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) { int timeout = DEF_TIMEOUT; - while (timeout-- && ISR & (ISR_IBB | ISR_UB)) { - if ((ISR & ISR_SAD) != 0) + while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { + if ((readl(_ISR(i2c)) & ISR_SAD) != 0) timeout += 4; msleep(2); @@ -214,9 +230,9 @@ static int i2c_pxa_wait_master(struct pxa_i2c *i2c) while (time_before(jiffies, timeout)) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", - __func__, (long)jiffies, ISR, ICR, IBMR); + __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); - if (ISR & ISR_SAD) { + if (readl(_ISR(i2c)) & ISR_SAD) { if (i2c_debug > 0) dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__); goto out; @@ -226,7 +242,7 @@ static int i2c_pxa_wait_master(struct pxa_i2c *i2c) * quick check of the i2c lines themselves to ensure they've * gone high... */ - if ((ISR & (ISR_UB | ISR_IBB)) == 0 && IBMR == 3) { + if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) { if (i2c_debug > 0) dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); return 1; @@ -246,7 +262,7 @@ static int i2c_pxa_set_master(struct pxa_i2c *i2c) if (i2c_debug) dev_dbg(&i2c->adap.dev, "setting to bus master\n"); - if ((ISR & (ISR_UB | ISR_IBB)) != 0) { + if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) { dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__); if (!i2c_pxa_wait_master(i2c)) { dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__); @@ -254,7 +270,7 @@ static int i2c_pxa_set_master(struct pxa_i2c *i2c) } } - ICR |= ICR_SCLE; + writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); return 0; } @@ -270,11 +286,11 @@ static int i2c_pxa_wait_slave(struct pxa_i2c *i2c) while (time_before(jiffies, timeout)) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", - __func__, (long)jiffies, ISR, ICR, IBMR); + __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); - if ((ISR & (ISR_UB|ISR_IBB)) == 0 || - (ISR & ISR_SAD) != 0 || - (ICR & ICR_SCLE) == 0) { + if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 || + (readl(_ISR(i2c)) & ISR_SAD) != 0 || + (readl(_ICR(i2c)) & ICR_SCLE) == 0) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); return 1; @@ -302,9 +318,9 @@ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) /* we need to wait for the stop condition to end */ /* if we where in stop, then clear... */ - if (ICR & ICR_STOP) { + if (readl(_ICR(i2c)) & ICR_STOP) { udelay(100); - ICR &= ~ICR_STOP; + writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c)); } if (!i2c_pxa_wait_slave(i2c)) { @@ -314,12 +330,12 @@ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) } } - ICR &= ~(ICR_STOP|ICR_ACKNAK|ICR_MA); - ICR &= ~ICR_SCLE; + writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c)); + writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); if (i2c_debug) { - dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", ICR, ISR); - decode_ICR(ICR); + dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c))); + decode_ICR(readl(_ICR(i2c))); } } #else @@ -334,24 +350,24 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) i2c_pxa_abort(i2c); /* reset according to 9.8 */ - ICR = ICR_UR; - ISR = I2C_ISR_INIT; - ICR &= ~ICR_UR; + writel(ICR_UR, _ICR(i2c)); + writel(I2C_ISR_INIT, _ISR(i2c)); + writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c)); - ISAR = i2c->slave_addr; + writel(i2c->slave_addr, _ISAR(i2c)); /* set control register values */ - ICR = I2C_ICR_INIT; + writel(I2C_ICR_INIT, _ICR(i2c)); #ifdef CONFIG_I2C_PXA_SLAVE dev_info(&i2c->adap.dev, "Enabling slave mode\n"); - ICR |= ICR_SADIE | ICR_ALDIE | ICR_SSDIE; + writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c)); #endif i2c_pxa_set_slave(i2c, 0); /* enable unit */ - ICR |= ICR_IUE; + writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c)); udelay(100); } @@ -371,19 +387,19 @@ static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) if (i2c->slave != NULL) ret = i2c->slave->read(i2c->slave->data); - IDBR = ret; - ICR |= ICR_TB; /* allow next byte */ + writel(ret, _IDBR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); /* allow next byte */ } } static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) { - unsigned int byte = IDBR; + unsigned int byte = readl(_IDBR(i2c)); if (i2c->slave != NULL) i2c->slave->write(i2c->slave->data, byte); - ICR |= ICR_TB; + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); } static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) @@ -403,13 +419,13 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) * start condition... if this happens, we'd better back off * and stop holding the poor thing up */ - ICR &= ~(ICR_START|ICR_STOP); - ICR |= ICR_TB; + writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); timeout = 0x10000; while (1) { - if ((IBMR & 2) == 2) + if ((readl(_IBMR(i2c)) & 2) == 2) break; timeout--; @@ -420,7 +436,7 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) } } - ICR &= ~ICR_SCLE; + writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); } static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) @@ -447,14 +463,14 @@ static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) if (isr & ISR_BED) { /* what should we do here? */ } else { - IDBR = 0; - ICR |= ICR_TB; + writel(0, _IDBR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); } } static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) { - ICR |= ICR_TB | ICR_ACKNAK; + writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); } static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) @@ -466,13 +482,13 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) * start condition... if this happens, we'd better back off * and stop holding the poor thing up */ - ICR &= ~(ICR_START|ICR_STOP); - ICR |= ICR_TB | ICR_ACKNAK; + writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); timeout = 0x10000; while (1) { - if ((IBMR & 2) == 2) + if ((readl(_IBMR(i2c)) & 2) == 2) break; timeout--; @@ -483,7 +499,7 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) } } - ICR &= ~ICR_SCLE; + writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); } static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) @@ -514,13 +530,13 @@ static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) /* * Step 1: target slave address into IDBR */ - IDBR = i2c_pxa_addr_byte(i2c->msg); + writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); /* * Step 2: initiate the write. */ - icr = ICR & ~(ICR_STOP | ICR_ALDIE); - ICR = icr | ICR_START | ICR_TB; + icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); + writel(icr | ICR_START | ICR_TB, _ICR(i2c)); } /* @@ -594,7 +610,7 @@ static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret) static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) { - u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); + u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); again: /* @@ -645,7 +661,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) /* * Write mode. Write the next data byte. */ - IDBR = i2c->msg->buf[i2c->msg_ptr++]; + writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c)); icr |= ICR_ALDIE | ICR_TB; @@ -675,7 +691,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) /* * Write the next address. */ - IDBR = i2c_pxa_addr_byte(i2c->msg); + writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); /* * And trigger a repeated start, and send the byte. @@ -696,18 +712,18 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) i2c->icrlog[i2c->irqlogidx-1] = icr; - ICR = icr; + writel(icr, _ICR(i2c)); show_state(i2c); } static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) { - u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); + u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); /* * Read the byte. */ - i2c->msg->buf[i2c->msg_ptr++] = IDBR; + i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c)); if (i2c->msg_ptr < i2c->msg->len) { /* @@ -724,17 +740,17 @@ static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) i2c->icrlog[i2c->irqlogidx-1] = icr; - ICR = icr; + writel(icr, _ICR(i2c)); } static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) { struct pxa_i2c *i2c = dev_id; - u32 isr = ISR; + u32 isr = readl(_ISR(i2c)); if (i2c_debug > 2 && 0) { dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n", - __func__, isr, ICR, IBMR); + __func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c))); decode_ISR(isr); } @@ -746,7 +762,7 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) /* * Always clear all pending IRQs. */ - ISR = isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED); + writel(isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED), _ISR(i2c)); if (isr & ISR_SAD) i2c_pxa_slave_start(i2c, isr); @@ -779,7 +795,7 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num /* If the I2C controller is disabled we need to reset it (probably due to a suspend/resume destroying state). We do this here as we can then avoid worrying about resuming the controller before its users. */ - if (!(ICR & ICR_IUE)) + if (!(readl(_ICR(i2c)) & ICR_IUE)) i2c_pxa_reset(i2c); for (i = adap->retries; i >= 0; i--) { @@ -810,28 +826,53 @@ static const struct i2c_algorithm i2c_pxa_algorithm = { static struct pxa_i2c i2c_pxa = { .lock = SPIN_LOCK_UNLOCKED, - .wait = __WAIT_QUEUE_HEAD_INITIALIZER(i2c_pxa.wait), .adap = { .owner = THIS_MODULE, .algo = &i2c_pxa_algorithm, - .name = "pxa2xx-i2c", + .name = "pxa2xx-i2c.0", .retries = 5, }, }; +#define res_len(r) ((r)->end - (r)->start + 1) static int i2c_pxa_probe(struct platform_device *dev) { struct pxa_i2c *i2c = &i2c_pxa; + struct resource *res; #ifdef CONFIG_I2C_PXA_SLAVE struct i2c_pxa_platform_data *plat = dev->dev.platform_data; #endif int ret; + int irq; -#ifdef CONFIG_PXA27x - pxa_gpio_mode(GPIO117_I2CSCL_MD); - pxa_gpio_mode(GPIO118_I2CSDA_MD); - udelay(100); -#endif + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + irq = platform_get_irq(dev, 0); + if (res == NULL || irq < 0) + return -ENODEV; + + if (!request_mem_region(res->start, res_len(res), res->name)) + return -ENOMEM; + + i2c = kmalloc(sizeof(struct pxa_i2c), GFP_KERNEL); + if (!i2c) { + ret = -ENOMEM; + goto emalloc; + } + + memcpy(i2c, &i2c_pxa, sizeof(struct pxa_i2c)); + init_waitqueue_head(&i2c->wait); + i2c->adap.name[strlen(i2c->adap.name) - 1] = '0' + dev->id % 10; + + i2c->reg_base = ioremap(res->start, res_len(res)); + if (!i2c->reg_base) { + ret = -EIO; + goto eremap; + } + + i2c->iobase = res->start; + i2c->iosize = res_len(res); + + i2c->irq = irq; i2c->slave_addr = I2C_PXA_SLAVE_ADDR; @@ -842,11 +883,28 @@ static int i2c_pxa_probe(struct platform_device *dev) } #endif - pxa_set_cken(CKEN14_I2C, 1); - ret = request_irq(IRQ_I2C, i2c_pxa_handler, IRQF_DISABLED, - "pxa2xx-i2c", i2c); + switch (dev->id) { + case 0: +#ifdef CONFIG_PXA27x + pxa_gpio_mode(GPIO117_I2CSCL_MD); + pxa_gpio_mode(GPIO118_I2CSDA_MD); +#endif + pxa_set_cken(CKEN14_I2C, 1); + break; +#ifdef CONFIG_PXA27x + case 1: + local_irq_disable(); + PCFR |= PCFR_PI2CEN; + local_irq_enable(); + pxa_set_cken(CKEN15_PWRI2C, 1); +#endif + } + + ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED, + i2c->adap.name, i2c); if (ret) - goto out; + goto ereqirq; + i2c_pxa_reset(i2c); @@ -856,7 +914,7 @@ static int i2c_pxa_probe(struct platform_device *dev) ret = i2c_add_adapter(&i2c->adap); if (ret < 0) { printk(KERN_INFO "I2C: Failed to add bus\n"); - goto err_irq; + goto eadapt; } platform_set_drvdata(dev, i2c); @@ -870,9 +928,25 @@ static int i2c_pxa_probe(struct platform_device *dev) #endif return 0; - err_irq: - free_irq(IRQ_I2C, i2c); - out: +eadapt: + free_irq(irq, i2c); +ereqirq: + switch (dev->id) { + case 0: + pxa_set_cken(CKEN14_I2C, 0); + break; +#ifdef CONFIG_PXA27x + case 1: + pxa_set_cken(CKEN15_PWRI2C, 0); + local_irq_disable(); + PCFR &= ~PCFR_PI2CEN; + local_irq_enable(); +#endif + } +eremap: + kfree(i2c); +emalloc: + release_mem_region(res->start, res_len(res)); return ret; } @@ -883,8 +957,21 @@ static int i2c_pxa_remove(struct platform_device *dev) platform_set_drvdata(dev, NULL); i2c_del_adapter(&i2c->adap); - free_irq(IRQ_I2C, i2c); - pxa_set_cken(CKEN14_I2C, 0); + free_irq(i2c->irq, i2c); + switch (dev->id) { + case 0: + pxa_set_cken(CKEN14_I2C, 0); + break; +#ifdef CONFIG_PXA27x + case 1: + pxa_set_cken(CKEN15_PWRI2C, 0); + local_irq_disable(); + PCFR &= ~PCFR_PI2CEN; + local_irq_enable(); +#endif + } + release_mem_region(i2c->iobase, i2c->iosize); + kfree(i2c); return 0; } diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c index aa152f3..521ace9 100644 --- a/drivers/mmc/at91_mci.c +++ b/drivers/mmc/at91_mci.c @@ -64,6 +64,7 @@ #include <linux/err.h> #include <linux/dma-mapping.h> #include <linux/clk.h> +#include <linux/atmel_pdc.h> #include <linux/mmc/host.h> #include <linux/mmc/protocol.h> @@ -75,7 +76,6 @@ #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/at91_mci.h> -#include <asm/arch/at91_pdc.h> #define DRIVER_NAME "at91_mci" @@ -211,13 +211,13 @@ static void at91mci_pre_dma_read(struct at91mci_host *host) /* Check to see if this needs filling */ if (i == 0) { - if (at91_mci_read(host, AT91_PDC_RCR) != 0) { + if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) { pr_debug("Transfer active in current\n"); continue; } } else { - if (at91_mci_read(host, AT91_PDC_RNCR) != 0) { + if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) { pr_debug("Transfer active in next\n"); continue; } @@ -234,12 +234,12 @@ static void at91mci_pre_dma_read(struct at91mci_host *host) pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length); if (i == 0) { - at91_mci_write(host, AT91_PDC_RPR, sg->dma_address); - at91_mci_write(host, AT91_PDC_RCR, sg->length / 4); + at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address); + at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4); } else { - at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address); - at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4); + at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address); + at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4); } } @@ -303,7 +303,7 @@ static void at91mci_post_dma_read(struct at91mci_host *host) at91mci_pre_dma_read(host); else { at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF); - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); } pr_debug("post dma read done\n"); @@ -320,7 +320,7 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host) pr_debug("Handling the transmit\n"); /* Disable the transfer */ - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); /* Now wait for cmd ready */ at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE); @@ -431,15 +431,15 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR)); if (!data) { - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS); - at91_mci_write(host, AT91_PDC_RPR, 0); - at91_mci_write(host, AT91_PDC_RCR, 0); - at91_mci_write(host, AT91_PDC_RNPR, 0); - at91_mci_write(host, AT91_PDC_RNCR, 0); - at91_mci_write(host, AT91_PDC_TPR, 0); - at91_mci_write(host, AT91_PDC_TCR, 0); - at91_mci_write(host, AT91_PDC_TNPR, 0); - at91_mci_write(host, AT91_PDC_TNCR, 0); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS); + at91_mci_write(host, ATMEL_PDC_RPR, 0); + at91_mci_write(host, ATMEL_PDC_RCR, 0); + at91_mci_write(host, ATMEL_PDC_RNPR, 0); + at91_mci_write(host, ATMEL_PDC_RNCR, 0); + at91_mci_write(host, ATMEL_PDC_TPR, 0); + at91_mci_write(host, ATMEL_PDC_TCR, 0); + at91_mci_write(host, ATMEL_PDC_TNPR, 0); + at91_mci_write(host, ATMEL_PDC_TNCR, 0); at91_mci_write(host, AT91_MCI_ARGR, cmd->arg); at91_mci_write(host, AT91_MCI_CMDR, cmdr); @@ -452,7 +452,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ /* * Disable the PDC controller */ - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); if (cmdr & AT91_MCI_TRCMD_START) { data->bytes_xfered = 0; @@ -481,8 +481,8 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ pr_debug("Transmitting %d bytes\n", host->total_length); - at91_mci_write(host, AT91_PDC_TPR, host->physical_address); - at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4); + at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address); + at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4); ier = AT91_MCI_TXBUFE; } } @@ -497,9 +497,9 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_ if (cmdr & AT91_MCI_TRCMD_START) { if (cmdr & AT91_MCI_TRDIR) - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); else - at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN); + at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); } return ier; } diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 2978c09..09f8bff 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -262,7 +262,8 @@ config SERIAL_AMBA_PL010 select SERIAL_CORE help This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have - an Integrator/AP or Integrator/PP2 platform, say Y or M here. + an Integrator/AP or Integrator/PP2 platform, or if you have a + Cirrus Logic EP93xx CPU, say Y or M here. If unsure, say N. diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 881f886..0715647 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -33,12 +33,13 @@ #include <linux/sysrq.h> #include <linux/tty_flip.h> #include <linux/platform_device.h> +#include <linux/atmel_pdc.h> #include <asm/io.h> #include <asm/mach/serial_at91.h> #include <asm/arch/board.h> -#include <asm/arch/at91_pdc.h> + #ifdef CONFIG_ARM #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index e216dcf..04cc88c 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -154,7 +154,7 @@ static inline void imx_transmit_buffer(struct imx_port *sport) { struct circ_buf *xmit = &sport->port.info->xmit; - do { + while (!(UTS((u32)sport->port.membase) & UTS_TXFULL)) { /* send xmit->buf[xmit->tail] * out the port here */ URTX0((u32)sport->port.membase) = xmit->buf[xmit->tail]; @@ -163,7 +163,7 @@ static inline void imx_transmit_buffer(struct imx_port *sport) sport->port.icount.tx++; if (uart_circ_empty(xmit)) break; - } while (!(UTS((u32)sport->port.membase) & UTS_TXFULL)); + } if (uart_circ_empty(xmit)) imx_stop_tx(&sport->port); @@ -178,8 +178,7 @@ static void imx_start_tx(struct uart_port *port) UCR1((u32)sport->port.membase) |= UCR1_TXMPTYEN; - if(UTS((u32)sport->port.membase) & UTS_TXEMPTY) - imx_transmit_buffer(sport); + imx_transmit_buffer(sport); } static irqreturn_t imx_rtsint(int irq, void *dev_id) @@ -404,7 +403,8 @@ static int imx_startup(struct uart_port *port) if (retval) goto error_out2; retval = request_irq(sport->rtsirq, imx_rtsint, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + (sport->rtsirq < IMX_IRQS) ? 0 : + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, DRIVER_NAME, sport); if (retval) goto error_out3; @@ -678,7 +678,7 @@ static struct imx_port imx_ports[] = { .mapbase = IMX_UART1_BASE, /* FIXME */ .irq = UART1_MINT_RX, .uartclk = 16000000, - .fifosize = 8, + .fifosize = 32, .flags = UPF_BOOT_AUTOCONF, .ops = &imx_pops, .line = 0, @@ -694,7 +694,7 @@ static struct imx_port imx_ports[] = { .mapbase = IMX_UART2_BASE, /* FIXME */ .irq = UART2_MINT_RX, .uartclk = 16000000, - .fifosize = 8, + .fifosize = 32, .flags = UPF_BOOT_AUTOCONF, .ops = &imx_pops, .line = 1, diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 812c733..8afecb8 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -913,7 +913,7 @@ static void pullup(struct at91_udc *udc, int is_on) at91_udp_write(udc, AT91_UDP_TXVC, 0); if (cpu_is_at91rm9200()) at91_set_gpio_value(udc->board.pullup_pin, 1); - else if (cpu_is_at91sam9260()) { + else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) { u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC); txvc |= AT91_UDP_TXVC_PUON; @@ -930,7 +930,7 @@ static void pullup(struct at91_udc *udc, int is_on) at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); if (cpu_is_at91rm9200()) at91_set_gpio_value(udc->board.pullup_pin, 0); - else if (cpu_is_at91sam9260()) { + else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) { u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC); txvc &= ~AT91_UDP_TXVC_PUON; diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index b78de96..3547f04 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -156,7 +156,7 @@ static int is_vbus_present(void) struct pxa2xx_udc_mach_info *mach = the_controller->mach; if (mach->gpio_vbus) - return pxa_gpio_get(mach->gpio_vbus); + return udc_gpio_get(mach->gpio_vbus); if (mach->udc_is_connected) return mach->udc_is_connected(); return 1; @@ -168,7 +168,7 @@ static void pullup_off(void) struct pxa2xx_udc_mach_info *mach = the_controller->mach; if (mach->gpio_pullup) - pxa_gpio_set(mach->gpio_pullup, 0); + udc_gpio_set(mach->gpio_pullup, 0); else if (mach->udc_command) mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); } @@ -178,7 +178,7 @@ static void pullup_on(void) struct pxa2xx_udc_mach_info *mach = the_controller->mach; if (mach->gpio_pullup) - pxa_gpio_set(mach->gpio_pullup, 1); + udc_gpio_set(mach->gpio_pullup, 1); else if (mach->udc_command) mach->udc_command(PXA2XX_UDC_CMD_CONNECT); } @@ -1756,7 +1756,7 @@ lubbock_vbus_irq(int irq, void *_dev) static irqreturn_t udc_vbus_irq(int irq, void *_dev) { struct pxa2xx_udc *dev = _dev; - int vbus = pxa_gpio_get(dev->mach->gpio_vbus); + int vbus = udc_gpio_get(dev->mach->gpio_vbus); pxa2xx_udc_vbus_session(&dev->gadget, vbus); return IRQ_HANDLED; @@ -2546,15 +2546,13 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->mach = pdev->dev.platform_data; if (dev->mach->gpio_vbus) { - vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR); - pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR) - | GPIO_IN); + udc_gpio_init_vbus(dev->mach->gpio_vbus); + vbus_irq = udc_gpio_to_irq(dev->mach->gpio_vbus); set_irq_type(vbus_irq, IRQT_BOTHEDGE); } else vbus_irq = 0; if (dev->mach->gpio_pullup) - pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR) - | GPIO_OUT | GPIO_DFLT_LOW); + udc_gpio_init_pullup(dev->mach->gpio_pullup); init_timer(&dev->timer); dev->timer.function = udc_watchdog; diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h index 8e598c8..773e549 100644 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -177,21 +177,6 @@ struct pxa2xx_udc { static struct pxa2xx_udc *the_controller; -static inline int pxa_gpio_get(unsigned gpio) -{ - return (GPLR(gpio) & GPIO_bit(gpio)) != 0; -} - -static inline void pxa_gpio_set(unsigned gpio, int is_on) -{ - int mask = GPIO_bit(gpio); - - if (is_on) - GPSR(gpio) = mask; - else - GPCR(gpio) = mask; -} - /*-------------------------------------------------------------------------*/ /* |