diff options
Diffstat (limited to 'fs/partitions/Kconfig')
| -rw-r--r-- | fs/partitions/Kconfig | 251 |
1 files changed, 0 insertions, 251 deletions
diff --git a/fs/partitions/Kconfig b/fs/partitions/Kconfig deleted file mode 100644 index cb5f0a3..0000000 --- a/fs/partitions/Kconfig +++ /dev/null @@ -1,251 +0,0 @@ -# -# Partition configuration -# -config PARTITION_ADVANCED - bool "Advanced partition selection" - help - Say Y here if you would like to use hard disks under Linux which - were partitioned under an operating system running on a different - architecture than your Linux system. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about foreign partitioning schemes. - - If unsure, say N. - -config ACORN_PARTITION - bool "Acorn partition support" if PARTITION_ADVANCED - default y if ARCH_ACORN - help - Support hard disks partitioned under Acorn operating systems. - -config ACORN_PARTITION_CUMANA - bool "Cumana partition support" if PARTITION_ADVANCED - default y if ARCH_ACORN - depends on ACORN_PARTITION - help - Say Y here if you would like to use hard disks under Linux which - were partitioned using the Cumana interface on Acorn machines. - -config ACORN_PARTITION_EESOX - bool "EESOX partition support" if PARTITION_ADVANCED - default y if ARCH_ACORN - depends on ACORN_PARTITION - -config ACORN_PARTITION_ICS - bool "ICS partition support" if PARTITION_ADVANCED - default y if ARCH_ACORN - depends on ACORN_PARTITION - help - Say Y here if you would like to use hard disks under Linux which - were partitioned using the ICS interface on Acorn machines. - -config ACORN_PARTITION_ADFS - bool "Native filecore partition support" if PARTITION_ADVANCED - default y if ARCH_ACORN - depends on ACORN_PARTITION - help - The Acorn Disc Filing System is the standard file system of the - RiscOS operating system which runs on Acorn's ARM-based Risc PC - systems and the Acorn Archimedes range of machines. If you say - `Y' here, Linux will support disk partitions created under ADFS. - -config ACORN_PARTITION_POWERTEC - bool "PowerTec partition support" if PARTITION_ADVANCED - default y if ARCH_ACORN - depends on ACORN_PARTITION - help - Support reading partition tables created on Acorn machines using - the PowerTec SCSI drive. - -config ACORN_PARTITION_RISCIX - bool "RISCiX partition support" if PARTITION_ADVANCED - default y if ARCH_ACORN - depends on ACORN_PARTITION - help - Once upon a time, there was a native Unix port for the Acorn series - of machines called RISCiX. If you say 'Y' here, Linux will be able - to read disks partitioned under RISCiX. - -config OSF_PARTITION - bool "Alpha OSF partition support" if PARTITION_ADVANCED - default y if ALPHA - help - Say Y here if you would like to use hard disks under Linux which - were partitioned on an Alpha machine. - -config AMIGA_PARTITION - bool "Amiga partition table support" if PARTITION_ADVANCED - default y if (AMIGA || AFFS_FS=y) - help - Say Y here if you would like to use hard disks under Linux which - were partitioned under AmigaOS. - -config ATARI_PARTITION - bool "Atari partition table support" if PARTITION_ADVANCED - default y if ATARI - help - Say Y here if you would like to use hard disks under Linux which - were partitioned under the Atari OS. - -config IBM_PARTITION - bool "IBM disk label and partition support" - depends on PARTITION_ADVANCED && S390 - help - Say Y here if you would like to be able to read the hard disk - partition table format used by IBM DASD disks operating under CMS. - Otherwise, say N. - -config MAC_PARTITION - bool "Macintosh partition map support" if PARTITION_ADVANCED - default y if (MAC || PPC_PMAC) - help - Say Y here if you would like to use hard disks under Linux which - were partitioned on a Macintosh. - -config MSDOS_PARTITION - bool "PC BIOS (MSDOS partition tables) support" if PARTITION_ADVANCED - default y - help - Say Y here. - -config BSD_DISKLABEL - bool "BSD disklabel (FreeBSD partition tables) support" - depends on PARTITION_ADVANCED && MSDOS_PARTITION - help - FreeBSD uses its own hard disk partition scheme on your PC. It - requires only one entry in the primary partition table of your disk - and manages it similarly to DOS extended partitions, putting in its - first sector a new partition table in BSD disklabel format. Saying Y - here allows you to read these disklabels and further mount FreeBSD - partitions from within Linux if you have also said Y to "UFS - file system support", above. If you don't know what all this is - about, say N. - -config MINIX_SUBPARTITION - bool "Minix subpartition support" - depends on PARTITION_ADVANCED && MSDOS_PARTITION - help - Minix 2.0.0/2.0.2 subpartition table support for Linux. - Say Y here if you want to mount and use Minix 2.0.0/2.0.2 - subpartitions. - -config SOLARIS_X86_PARTITION - bool "Solaris (x86) partition table support" - depends on PARTITION_ADVANCED && MSDOS_PARTITION - help - Like most systems, Solaris x86 uses its own hard disk partition - table format, incompatible with all others. Saying Y here allows you - to read these partition tables and further mount Solaris x86 - partitions from within Linux if you have also said Y to "UFS - file system support", above. - -config UNIXWARE_DISKLABEL - bool "Unixware slices support" - depends on PARTITION_ADVANCED && MSDOS_PARTITION - ---help--- - Like some systems, UnixWare uses its own slice table inside a - partition (VTOC - Virtual Table of Contents). Its format is - incompatible with all other OSes. Saying Y here allows you to read - VTOC and further mount UnixWare partitions read-only from within - Linux if you have also said Y to "UFS file system support" or - "System V and Coherent file system support", above. - - This is mainly used to carry data from a UnixWare box to your - Linux box via a removable medium like magneto-optical, ZIP or - removable IDE drives. Note, however, that a good portable way to - transport files and directories between unixes (and even other - operating systems) is given by the tar program ("man tar" or - preferably "info tar"). - - If you don't know what all this is about, say N. - -config LDM_PARTITION - bool "Windows Logical Disk Manager (Dynamic Disk) support" - depends on PARTITION_ADVANCED - ---help--- - Say Y here if you would like to use hard disks under Linux which - were partitioned using Windows 2000's/XP's or Vista's Logical Disk - Manager. They are also known as "Dynamic Disks". - - Note this driver only supports Dynamic Disks with a protective MBR - label, i.e. DOS partition table. It does not support GPT labelled - Dynamic Disks yet as can be created with Vista. - - Windows 2000 introduced the concept of Dynamic Disks to get around - the limitations of the PC's partitioning scheme. The Logical Disk - Manager allows the user to repartition a disk and create spanned, - mirrored, striped or RAID volumes, all without the need for - rebooting. - - Normal partitions are now called Basic Disks under Windows 2000, XP, - and Vista. - - For a fuller description read <file:Documentation/ldm.txt>. - - If unsure, say N. - -config LDM_DEBUG - bool "Windows LDM extra logging" - depends on LDM_PARTITION - help - Say Y here if you would like LDM to log verbosely. This could be - helpful if the driver doesn't work as expected and you'd like to - report a bug. - - If unsure, say N. - -config SGI_PARTITION - bool "SGI partition support" if PARTITION_ADVANCED - default y if DEFAULT_SGI_PARTITION - help - Say Y here if you would like to be able to read the hard disk - partition table format used by SGI machines. - -config ULTRIX_PARTITION - bool "Ultrix partition table support" if PARTITION_ADVANCED - default y if MACH_DECSTATION - help - Say Y here if you would like to be able to read the hard disk - partition table format used by DEC (now Compaq) Ultrix machines. - Otherwise, say N. - -config SUN_PARTITION - bool "Sun partition tables support" if PARTITION_ADVANCED - default y if (SPARC || SUN3 || SUN3X) - ---help--- - Like most systems, SunOS uses its own hard disk partition table - format, incompatible with all others. Saying Y here allows you to - read these partition tables and further mount SunOS partitions from - within Linux if you have also said Y to "UFS file system support", - above. This is mainly used to carry data from a SPARC under SunOS to - your Linux box via a removable medium like magneto-optical or ZIP - drives; note however that a good portable way to transport files and - directories between unixes (and even other operating systems) is - given by the tar program ("man tar" or preferably "info tar"). If - you don't know what all this is about, say N. - -config KARMA_PARTITION - bool "Karma Partition support" - depends on PARTITION_ADVANCED - help - Say Y here if you would like to mount the Rio Karma MP3 player, as it - uses a proprietary partition table. - -config EFI_PARTITION - bool "EFI GUID Partition support" - depends on PARTITION_ADVANCED - select CRC32 - help - Say Y here if you would like to use hard disks under Linux which - were partitioned using EFI GPT. - -config SYSV68_PARTITION - bool "SYSV68 partition table support" if PARTITION_ADVANCED - default y if VME - help - Say Y here if you would like to be able to read the hard disk - partition table format used by Motorola Delta machines (using - sysv68). - Otherwise, say N. |