diff options
Diffstat (limited to 'include/asm-arm')
24 files changed, 1370 insertions, 360 deletions
diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h index d64ee92..95ba430 100644 --- a/include/asm-arm/arch-omap/board-h4.h +++ b/include/asm-arm/arch-omap/board-h4.h @@ -34,5 +34,9 @@ #define OMAP24XX_ETHR_START 0x08000300 #define OMAP24XX_ETHR_GPIO_IRQ 92 +#define H4_CS0_BASE 0x04000000 + +#define H4_CS0_BASE 0x04000000 + #endif /* __ASM_ARCH_OMAP_H4_H */ diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h index 79574e0..b3cf334 100644 --- a/include/asm-arm/arch-omap/board-innovator.h +++ b/include/asm-arm/arch-omap/board-innovator.h @@ -26,7 +26,7 @@ #ifndef __ASM_ARCH_OMAP_INNOVATOR_H #define __ASM_ARCH_OMAP_INNOVATOR_H -#if defined (CONFIG_ARCH_OMAP1510) +#if defined (CONFIG_ARCH_OMAP15XX) #ifndef OMAP_SDRAM_DEVICE #define OMAP_SDRAM_DEVICE D256M_1X16_4B @@ -44,7 +44,7 @@ void fpga_write(unsigned char val, int reg); unsigned char fpga_read(int reg); #endif -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #if defined (CONFIG_ARCH_OMAP16XX) diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h new file mode 100644 index 0000000..740c297 --- /dev/null +++ b/include/asm-arm/arch-omap/clock.h @@ -0,0 +1,91 @@ +/* + * linux/include/asm-arm/arch-omap/clock.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_CLOCK_H +#define __ARCH_ARM_OMAP_CLOCK_H + +struct module; + +struct clk { + struct list_head node; + struct module *owner; + const char *name; + struct clk *parent; + unsigned long rate; + __u32 flags; + void __iomem *enable_reg; + __u8 enable_bit; + __u8 rate_offset; + __u8 src_offset; + __s8 usecount; + void (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + int (*enable)(struct clk *); + void (*disable)(struct clk *); +}; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + int (*clk_use)(struct clk *clk); + void (*clk_unuse)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + struct clk * (*clk_get_parent)(struct clk *clk); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); +}; + +extern unsigned int mpurate; +extern struct list_head clocks; +extern spinlock_t clockfw_lock; + +extern int clk_init(struct clk_functions * custom_clocks); +extern int clk_register(struct clk *clk); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void followparent_recalc(struct clk * clk); +extern void clk_allow_idle(struct clk *clk); +extern void clk_deny_idle(struct clk *clk); + +/* Clock flags */ +#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ +#define RATE_FIXED (1 << 1) /* Fixed clock rate */ +#define RATE_PROPAGATES (1 << 2) /* Program children too */ +#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */ +#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */ +#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ +#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */ +#define CLOCK_IDLE_CONTROL (1 << 7) +#define CLOCK_NO_IDLE_PARENT (1 << 8) +#define DELAYED_APP (1 << 9) /* Delay application of clock */ +#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ +#define CM_MPU_SEL1 (1 << 11) /* Domain divider/source */ +#define CM_DSP_SEL1 (1 << 12) +#define CM_GFX_SEL1 (1 << 13) +#define CM_MODEM_SEL1 (1 << 14) +#define CM_CORE_SEL1 (1 << 15) /* Sets divider for many */ +#define CM_CORE_SEL2 (1 << 16) /* sets parent for GPT */ +#define CM_WKUP_SEL1 (1 << 17) +#define CM_PLL_SEL1 (1 << 18) +#define CM_PLL_SEL2 (1 << 19) +#define CM_SYSCLKOUT_SEL1 (1 << 20) +#define CLOCK_IN_OMAP730 (1 << 21) +#define CLOCK_IN_OMAP1510 (1 << 22) +#define CLOCK_IN_OMAP16XX (1 << 23) +#define CLOCK_IN_OMAP242X (1 << 24) +#define CLOCK_IN_OMAP243X (1 << 25) + +#endif diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h index 2a676b4..08d58ab 100644 --- a/include/asm-arm/arch-omap/common.h +++ b/include/asm-arm/arch-omap/common.h @@ -31,6 +31,6 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; -extern void omap_serial_init(int ports[]); +extern void omap_serial_init(void); #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h index 1119e2b..ec7eb67 100644 --- a/include/asm-arm/arch-omap/cpu.h +++ b/include/asm-arm/arch-omap/cpu.h @@ -28,12 +28,7 @@ extern unsigned int system_rev; -#define OMAP_DIE_ID_0 0xfffe1800 -#define OMAP_DIE_ID_1 0xfffe1804 -#define OMAP_PRODUCTION_ID_0 0xfffe2000 -#define OMAP_PRODUCTION_ID_1 0xfffe2004 -#define OMAP32_ID_0 0xfffed400 -#define OMAP32_ID_1 0xfffed404 +#define omap2_cpu_rev() ((system_rev >> 8) & 0x0f) /* * Test if multicore OMAP support is needed @@ -50,7 +45,7 @@ extern unsigned int system_rev; # define OMAP_NAME omap730 # endif #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX # ifdef OMAP_NAME # undef MULTI_OMAP1 # define MULTI_OMAP1 @@ -79,9 +74,11 @@ extern unsigned int system_rev; * Macros to group OMAP into cpu classes. * These can be used in most places. * cpu_is_omap7xx(): True for OMAP730 - * cpu_is_omap15xx(): True for OMAP1510 and OMAP5910 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - * cpu_is_omap24xx(): True for OMAP2420 + * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 + * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 + * cpu_is_omap243x(): True for OMAP2430 */ #define GET_OMAP_CLASS (system_rev & 0xff) @@ -91,22 +88,35 @@ static inline int is_omap ##class (void) \ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ } +#define GET_OMAP_SUBCLASS ((system_rev >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + IS_OMAP_CLASS(7xx, 0x07) IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) IS_OMAP_CLASS(24xx, 0x24) +IS_OMAP_SUBCLASS(242x, 0x242) +IS_OMAP_SUBCLASS(243x, 0x243) + #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 #define cpu_is_omap16xx() 0 #define cpu_is_omap24xx() 0 +#define cpu_is_omap242x() 0 +#define cpu_is_omap243x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) # undef cpu_is_omap7xx # define cpu_is_omap7xx() is_omap7xx() # endif -# if defined(CONFIG_ARCH_OMAP1510) +# if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap15xx # define cpu_is_omap15xx() is_omap15xx() # endif @@ -119,7 +129,7 @@ IS_OMAP_CLASS(24xx, 0x24) # undef cpu_is_omap7xx # define cpu_is_omap7xx() 1 # endif -# if defined(CONFIG_ARCH_OMAP1510) +# if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap15xx # define cpu_is_omap15xx() 1 # endif @@ -129,13 +139,18 @@ IS_OMAP_CLASS(24xx, 0x24) # endif # if defined(CONFIG_ARCH_OMAP24XX) # undef cpu_is_omap24xx +# undef cpu_is_omap242x +# undef cpu_is_omap243x # define cpu_is_omap24xx() 1 +# define cpu_is_omap242x() is_omap242x() +# define cpu_is_omap243x() is_omap243x() # endif #endif /* * Macros to detect individual cpu types. * These are only rarely needed. + * cpu_is_omap330(): True for OMAP330 * cpu_is_omap730(): True for OMAP730 * cpu_is_omap1510(): True for OMAP1510 * cpu_is_omap1610(): True for OMAP1610 @@ -144,6 +159,9 @@ IS_OMAP_CLASS(24xx, 0x24) * cpu_is_omap1621(): True for OMAP1621 * cpu_is_omap1710(): True for OMAP1710 * cpu_is_omap2420(): True for OMAP2420 + * cpu_is_omap2422(): True for OMAP2422 + * cpu_is_omap2423(): True for OMAP2423 + * cpu_is_omap2430(): True for OMAP2430 */ #define GET_OMAP_TYPE ((system_rev >> 16) & 0xffff) @@ -153,6 +171,7 @@ static inline int is_omap ##type (void) \ return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ } +IS_OMAP_TYPE(310, 0x0310) IS_OMAP_TYPE(730, 0x0730) IS_OMAP_TYPE(1510, 0x1510) IS_OMAP_TYPE(1610, 0x1610) @@ -161,7 +180,11 @@ IS_OMAP_TYPE(5912, 0x1611) IS_OMAP_TYPE(1621, 0x1621) IS_OMAP_TYPE(1710, 0x1710) IS_OMAP_TYPE(2420, 0x2420) +IS_OMAP_TYPE(2422, 0x2422) +IS_OMAP_TYPE(2423, 0x2423) +IS_OMAP_TYPE(2430, 0x2430) +#define cpu_is_omap310() 0 #define cpu_is_omap730() 0 #define cpu_is_omap1510() 0 #define cpu_is_omap1610() 0 @@ -170,31 +193,33 @@ IS_OMAP_TYPE(2420, 0x2420) #define cpu_is_omap1621() 0 #define cpu_is_omap1710() 0 #define cpu_is_omap2420() 0 +#define cpu_is_omap2422() 0 +#define cpu_is_omap2423() 0 +#define cpu_is_omap2430() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) # undef cpu_is_omap730 # define cpu_is_omap730() is_omap730() # endif -# if defined(CONFIG_ARCH_OMAP1510) -# undef cpu_is_omap1510 -# define cpu_is_omap1510() is_omap1510() -# endif #else # if defined(CONFIG_ARCH_OMAP730) # undef cpu_is_omap730 # define cpu_is_omap730() 1 # endif -# if defined(CONFIG_ARCH_OMAP1510) -# undef cpu_is_omap1510 -# define cpu_is_omap1510() 1 -# endif #endif /* * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 1611B/5912 and 1710. + * between 330 vs. 1510 and 1611B/5912 vs. 1710. */ +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + #if defined(CONFIG_ARCH_OMAP16XX) # undef cpu_is_omap1610 # undef cpu_is_omap1611 @@ -208,9 +233,20 @@ IS_OMAP_TYPE(2420, 0x2420) # define cpu_is_omap1710() is_omap1710() #endif -#if defined(CONFIG_ARCH_OMAP2420) -# undef cpu_is_omap2420 -# define cpu_is_omap2420() 1 +#if defined(CONFIG_ARCH_OMAP24XX) +# undef cpu_is_omap2420 +# undef cpu_is_omap2422 +# undef cpu_is_omap2423 +# undef cpu_is_omap2430 +# define cpu_is_omap2420() is_omap2420() +# define cpu_is_omap2422() is_omap2422() +# define cpu_is_omap2423() is_omap2423() +# define cpu_is_omap2430() is_omap2430() #endif +/* Macros to detect if we have OMAP1 or OMAP2 */ +#define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \ + cpu_is_omap16xx()) +#define cpu_class_is_omap2() cpu_is_omap24xx() + #endif diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index 04ebef5..ccbcb58 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -22,9 +22,109 @@ #define __ASM_ARCH_DMA_H #define MAX_DMA_ADDRESS 0xffffffff +#define MAX_DMA_CHANNELS 0 + +/* Hardware registers for omap1 */ +#define OMAP_DMA_BASE (0xfffed800) +#define OMAP_DMA_GCR (OMAP_DMA_BASE + 0x400) +#define OMAP_DMA_GSCR (OMAP_DMA_BASE + 0x404) +#define OMAP_DMA_GRST (OMAP_DMA_BASE + 0x408) +#define OMAP_DMA_HW_ID (OMAP_DMA_BASE + 0x442) +#define OMAP_DMA_PCH2_ID (OMAP_DMA_BASE + 0x444) +#define OMAP_DMA_PCH0_ID (OMAP_DMA_BASE + 0x446) +#define OMAP_DMA_PCH1_ID (OMAP_DMA_BASE + 0x448) +#define OMAP_DMA_PCHG_ID (OMAP_DMA_BASE + 0x44a) +#define OMAP_DMA_PCHD_ID (OMAP_DMA_BASE + 0x44c) +#define OMAP_DMA_CAPS_0_U (OMAP_DMA_BASE + 0x44e) +#define OMAP_DMA_CAPS_0_L (OMAP_DMA_BASE + 0x450) +#define OMAP_DMA_CAPS_1_U (OMAP_DMA_BASE + 0x452) +#define OMAP_DMA_CAPS_1_L (OMAP_DMA_BASE + 0x454) +#define OMAP_DMA_CAPS_2 (OMAP_DMA_BASE + 0x456) +#define OMAP_DMA_CAPS_3 (OMAP_DMA_BASE + 0x458) +#define OMAP_DMA_CAPS_4 (OMAP_DMA_BASE + 0x45a) +#define OMAP_DMA_PCH2_SR (OMAP_DMA_BASE + 0x460) +#define OMAP_DMA_PCH0_SR (OMAP_DMA_BASE + 0x480) +#define OMAP_DMA_PCH1_SR (OMAP_DMA_BASE + 0x482) +#define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0) + +/* Hardware registers for omap2 */ +#define OMAP24XX_DMA_BASE (L4_24XX_BASE + 0x56000) +#define OMAP_DMA4_REVISION (OMAP24XX_DMA_BASE + 0x00) +#define OMAP_DMA4_GCR_REG (OMAP24XX_DMA_BASE + 0x78) +#define OMAP_DMA4_IRQSTATUS_L0 (OMAP24XX_DMA_BASE + 0x08) +#define OMAP_DMA4_IRQSTATUS_L1 (OMAP24XX_DMA_BASE + 0x0c) +#define OMAP_DMA4_IRQSTATUS_L2 (OMAP24XX_DMA_BASE + 0x10) +#define OMAP_DMA4_IRQSTATUS_L3 (OMAP24XX_DMA_BASE + 0x14) +#define OMAP_DMA4_IRQENABLE_L0 (OMAP24XX_DMA_BASE + 0x18) +#define OMAP_DMA4_IRQENABLE_L1 (OMAP24XX_DMA_BASE + 0x1c) +#define OMAP_DMA4_IRQENABLE_L2 (OMAP24XX_DMA_BASE + 0x20) +#define OMAP_DMA4_IRQENABLE_L3 (OMAP24XX_DMA_BASE + 0x24) +#define OMAP_DMA4_SYSSTATUS (OMAP24XX_DMA_BASE + 0x28) +#define OMAP_DMA4_CAPS_0 (OMAP24XX_DMA_BASE + 0x64) +#define OMAP_DMA4_CAPS_2 (OMAP24XX_DMA_BASE + 0x6c) +#define OMAP_DMA4_CAPS_3 (OMAP24XX_DMA_BASE + 0x70) +#define OMAP_DMA4_CAPS_4 (OMAP24XX_DMA_BASE + 0x74) + +#ifdef CONFIG_ARCH_OMAP1 #define OMAP_LOGICAL_DMA_CH_COUNT 17 +/* Common channel specific registers for omap1 */ +#define OMAP_DMA_CSDP_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x00) +#define OMAP_DMA_CCR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x02) +#define OMAP_DMA_CICR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x04) +#define OMAP_DMA_CSR_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x06) +#define OMAP_DMA_CEN_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x10) +#define OMAP_DMA_CFN_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x12) +#define OMAP_DMA_CSFI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x14) +#define OMAP_DMA_CSEI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x16) +#define OMAP_DMA_CSAC_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x18) +#define OMAP_DMA_CDAC_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1a) +#define OMAP_DMA_CDEI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1c) +#define OMAP_DMA_CDFI_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x1e) +#define OMAP_DMA_CLNK_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x28) + +#else + +#define OMAP_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ + +/* Common channel specific registers for omap2 */ +#define OMAP_DMA_CCR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x80) +#define OMAP_DMA_CLNK_CTRL_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x84) +#define OMAP_DMA_CICR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x88) +#define OMAP_DMA_CSR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x8c) +#define OMAP_DMA_CSDP_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x90) +#define OMAP_DMA_CEN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x94) +#define OMAP_DMA_CFN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x98) +#define OMAP_DMA_CSEI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa4) +#define OMAP_DMA_CSFI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa8) +#define OMAP_DMA_CDEI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xac) +#define OMAP_DMA_CDFI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb0) +#define OMAP_DMA_CSAC_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb4) +#define OMAP_DMA_CDAC_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb8) + +#endif + +/* Channel specific registers only on omap1 */ +#define OMAP1_DMA_CSSA_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x08) +#define OMAP1_DMA_CSSA_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0a) +#define OMAP1_DMA_CDSA_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0c) +#define OMAP1_DMA_CDSA_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x0e) +#define OMAP1_DMA_COLOR_L_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x20) +#define OMAP1_DMA_CCR2_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x24) +#define OMAP1_DMA_COLOR_U_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x22) +#define OMAP1_DMA_LCH_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x2a) + +/* Channel specific registers only on omap2 */ +#define OMAP2_DMA_CSSA_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x9c) +#define OMAP2_DMA_CDSA_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa0) +#define OMAP2_DMA_CCEN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xbc) +#define OMAP2_DMA_CCFN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc0) +#define OMAP2_DMA_COLOR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc4) + +/*----------------------------------------------------------------------------*/ + +/* DMA channels for omap1 */ #define OMAP_DMA_NO_DEVICE 0 #define OMAP_DMA_MCSI1_TX 1 #define OMAP_DMA_MCSI1_RX 2 @@ -85,29 +185,72 @@ #define OMAP_DMA_MMC2_RX 55 #define OMAP_DMA_CRYPTO_DES_OUT 56 +/* DMA channels for 24xx */ +#define OMAP24XX_DMA_NO_DEVICE 0 +#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ +#define OMAP24XX_DMA_EXT_NDMA_REQ0 2 /* S_DMA_1 */ +#define OMAP24XX_DMA_EXT_NDMA_REQ1 3 /* S_DMA_2 */ +#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ +#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ +#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ +#define OMAP24XX_DMA_VLYNQ_TX 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ +#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ +#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ +#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ +#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ +#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP_DMA_BASE (0xfffed800) -#define OMAP_DMA_GCR (OMAP_DMA_BASE + 0x400) -#define OMAP_DMA_GSCR (OMAP_DMA_BASE + 0x404) -#define OMAP_DMA_GRST (OMAP_DMA_BASE + 0x408) -#define OMAP_DMA_HW_ID (OMAP_DMA_BASE + 0x442) -#define OMAP_DMA_PCH2_ID (OMAP_DMA_BASE + 0x444) -#define OMAP_DMA_PCH0_ID (OMAP_DMA_BASE + 0x446) -#define OMAP_DMA_PCH1_ID (OMAP_DMA_BASE + 0x448) -#define OMAP_DMA_PCHG_ID (OMAP_DMA_BASE + 0x44a) -#define OMAP_DMA_PCHD_ID (OMAP_DMA_BASE + 0x44c) -#define OMAP_DMA_CAPS_0_U (OMAP_DMA_BASE + 0x44e) -#define OMAP_DMA_CAPS_0_L (OMAP_DMA_BASE + 0x450) -#define OMAP_DMA_CAPS_1_U (OMAP_DMA_BASE + 0x452) -#define OMAP_DMA_CAPS_1_L (OMAP_DMA_BASE + 0x454) -#define OMAP_DMA_CAPS_2 (OMAP_DMA_BASE + 0x456) -#define OMAP_DMA_CAPS_3 (OMAP_DMA_BASE + 0x458) -#define OMAP_DMA_CAPS_4 (OMAP_DMA_BASE + 0x45a) -#define OMAP_DMA_PCH2_SR (OMAP_DMA_BASE + 0x460) -#define OMAP_DMA_PCH0_SR (OMAP_DMA_BASE + 0x480) -#define OMAP_DMA_PCH1_SR (OMAP_DMA_BASE + 0x482) -#define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0) +#define OMAP24XX_DMA_EAC_AC_RD 17 /* S_DMA_16 */ +#define OMAP24XX_DMA_EAC_AC_WR 18 /* S_DMA_17 */ +#define OMAP24XX_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ +#define OMAP24XX_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ +#define OMAP24XX_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ +#define OMAP24XX_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ +#define OMAP24XX_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ +#define OMAP24XX_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ +#define OMAP24XX_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ +#define OMAP24XX_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ +#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ +#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ +#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ +#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ +#define OMAP24XX_DMA_MCBSP1_TX 31 /* SDMA_30 */ +#define OMAP24XX_DMA_MCBSP1_RX 32 /* SDMA_31 */ +#define OMAP24XX_DMA_MCBSP2_TX 33 /* SDMA_32 */ +#define OMAP24XX_DMA_MCBSP2_RX 34 /* SDMA_33 */ +#define OMAP24XX_DMA_SPI1_TX0 35 /* SDMA_34 */ +#define OMAP24XX_DMA_SPI1_RX0 36 /* SDMA_35 */ +#define OMAP24XX_DMA_SPI1_TX1 37 /* SDMA_36 */ +#define OMAP24XX_DMA_SPI1_RX1 38 /* SDMA_37 */ +#define OMAP24XX_DMA_SPI1_TX2 39 /* SDMA_38 */ +#define OMAP24XX_DMA_SPI1_RX2 40 /* SDMA_39 */ +#define OMAP24XX_DMA_SPI1_TX3 41 /* SDMA_40 */ +#define OMAP24XX_DMA_SPI1_RX3 42 /* SDMA_41 */ +#define OMAP24XX_DMA_SPI2_TX0 43 /* SDMA_42 */ +#define OMAP24XX_DMA_SPI2_RX0 44 /* SDMA_43 */ +#define OMAP24XX_DMA_SPI2_TX1 45 /* SDMA_44 */ +#define OMAP24XX_DMA_SPI2_RX1 46 /* SDMA_45 */ +#define OMAP24XX_DMA_UART1_TX 49 /* SDMA_48 */ +#define OMAP24XX_DMA_UART1_RX 50 /* SDMA_49 */ +#define OMAP24XX_DMA_UART2_TX 51 /* SDMA_50 */ +#define OMAP24XX_DMA_UART2_RX 52 /* SDMA_51 */ +#define OMAP24XX_DMA_UART3_TX 53 /* SDMA_52 */ +#define OMAP24XX_DMA_UART3_RX 54 /* SDMA_53 */ +#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* SDMA_54 */ +#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* SDMA_55 */ +#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* SDMA_56 */ +#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* SDMA_57 */ +#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* SDMA_58 */ +#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* SDMA_59 */ +#define OMAP24XX_DMA_MMC1_TX 61 /* SDMA_60 */ +#define OMAP24XX_DMA_MMC1_RX 62 /* SDMA_61 */ +#define OMAP24XX_DMA_MS 63 /* SDMA_62 */ + +/*----------------------------------------------------------------------------*/ + +/* Hardware registers for LCD DMA */ #define OMAP1510_DMA_LCD_BASE (0xfffedb00) #define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) #define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) @@ -116,7 +259,7 @@ #define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) #define OMAP1610_DMA_LCD_BASE (0xfffee300) -#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) +#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) #define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) #define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) #define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) @@ -134,37 +277,18 @@ #define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) #define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) - -/* Every LCh has its own set of the registers below */ -#define OMAP_DMA_CSDP(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x00) -#define OMAP_DMA_CCR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x02) -#define OMAP_DMA_CICR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x04) -#define OMAP_DMA_CSR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x06) -#define OMAP_DMA_CSSA_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x08) -#define OMAP_DMA_CSSA_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0a) -#define OMAP_DMA_CDSA_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0c) -#define OMAP_DMA_CDSA_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0e) -#define OMAP_DMA_CEN(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x10) -#define OMAP_DMA_CFN(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x12) -#define OMAP_DMA_CSFI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x14) -#define OMAP_DMA_CSEI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x16) -#define OMAP_DMA_CSAC(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x18) -#define OMAP_DMA_CDAC(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1a) -#define OMAP_DMA_CDEI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1c) -#define OMAP_DMA_CDFI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1e) -#define OMAP_DMA_COLOR_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x20) -#define OMAP_DMA_COLOR_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x22) -#define OMAP_DMA_CCR2(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x24) -#define OMAP_DMA_CLNK_CTRL(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x28) -#define OMAP_DMA_LCH_CTRL(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x2a) - -#define OMAP_DMA_TOUT_IRQ (1 << 0) +#define OMAP_DMA_TOUT_IRQ (1 << 0) /* Only on omap1 */ #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) #define OMAP_DMA_FRAME_IRQ (1 << 3) #define OMAP_DMA_LAST_IRQ (1 << 4) #define OMAP_DMA_BLOCK_IRQ (1 << 5) -#define OMAP_DMA_SYNC_IRQ (1 << 6) +#define OMAP1_DMA_SYNC_IRQ (1 << 6) +#define OMAP2_DMA_PKT_IRQ (1 << 7) +#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) +#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) +#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) +#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) #define OMAP_DMA_DATA_TYPE_S8 0x00 #define OMAP_DMA_DATA_TYPE_S16 0x01 @@ -194,6 +318,7 @@ enum { OMAP_LCD_DMA_B2_BOTTOM }; +/* REVISIT: Check if BURST_4 is really 1 (or 2) */ enum omap_dma_burst_mode { OMAP_DMA_DATA_BURST_DIS = 0, OMAP_DMA_DATA_BURST_4, @@ -206,6 +331,31 @@ enum omap_dma_color_mode { OMAP_DMA_TRANSPARENT_COPY }; +struct omap_dma_channel_params { + int data_type; /* data type 8,16,32 */ + int elem_count; /* number of elements in a frame */ + int frame_count; /* number of frames in a element */ + + int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int src_amode; /* constant , post increment, indexed , double indexed */ + int src_start; /* source address : physical */ + int src_ei; /* source element index */ + int src_fi; /* source frame index */ + + int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int dst_amode; /* constant , post increment, indexed , double indexed */ + int dst_start; /* source address : physical */ + int dst_ei; /* source element index */ + int dst_fi; /* source frame index */ + + int trigger; /* trigger attached if the channel is synchronized */ + int sync_mode; /* sycn on element, frame , block or packet */ + int src_or_dst_synch; /* source synch(1) or destination synch(0) */ + + int ie; /* interrupt enabled */ +}; + + extern void omap_set_dma_priority(int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (* callback)(int lch, u16 ch_status, void *data), @@ -217,24 +367,30 @@ extern void omap_start_dma(int lch); extern void omap_stop_dma(int lch); extern void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, int frame_count, - int sync_mode); + int sync_mode, + int dma_trigger, int src_or_dst_synch); extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color); extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, - unsigned long src_start); + unsigned long src_start, + int src_ei, int src_fi); extern void omap_set_dma_src_index(int lch, int eidx, int fidx); extern void omap_set_dma_src_data_pack(int lch, int enable); extern void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode); extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, - unsigned long dest_start); + unsigned long dest_start, + int dst_ei, int dst_fi); extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); extern void omap_set_dma_dest_data_pack(int lch, int enable); extern void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode); +extern void omap_set_dma_params(int lch, + struct omap_dma_channel_params * params); + extern void omap_dma_link_lch (int lch_head, int lch_queue); extern void omap_dma_unlink_lch (int lch_head, int lch_queue); @@ -244,9 +400,6 @@ extern int omap_get_dma_src_addr_counter(int lch); extern void omap_clear_dma(int lch); extern int omap_dma_running(void); -/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ -extern int omap_dma_in_1510_mode(void); - /* LCD DMA functions */ extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data), void *data); diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S index 0d29b9c..f8814a8 100644 --- a/include/asm-arm/arch-omap/entry-macro.S +++ b/include/asm-arm/arch-omap/entry-macro.S @@ -10,6 +10,20 @@ #if defined(CONFIG_ARCH_OMAP1) +#if defined(CONFIG_ARCH_OMAP730) && \ + (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) +#error "FIXME: OMAP730 doesn't support multiple-OMAP" +#elif defined(CONFIG_ARCH_OMAP730) +#define INT_IH2_IRQ INT_730_IH2_IRQ +#elif defined(CONFIG_ARCH_OMAP15XX) +#define INT_IH2_IRQ INT_1510_IH2_IRQ +#elif defined(CONFIG_ARCH_OMAP16XX) +#define INT_IH2_IRQ INT_1610_IH2_IRQ +#else +#warning "IH2 IRQ defaulted" +#define INT_IH2_IRQ INT_1510_IH2_IRQ +#endif + .macro disable_fiq .endm diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h index 676807d..6a883e0 100644 --- a/include/asm-arm/arch-omap/fpga.h +++ b/include/asm-arm/arch-omap/fpga.h @@ -19,7 +19,7 @@ #ifndef __ASM_ARCH_OMAP_FPGA_H #define __ASM_ARCH_OMAP_FPGA_H -#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP1510) +#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX) extern void omap1510_fpga_init_irq(void); #else #define omap1510_fpga_init_irq() (0) @@ -77,6 +77,8 @@ struct h2p2_dbg_fpga { #define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 #define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) +#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) +#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) /* * --------------------------------------------------------------------------- diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h index 74cb2b9..1b38857 100644 --- a/include/asm-arm/arch-omap/gpio.h +++ b/include/asm-arm/arch-omap/gpio.h @@ -67,7 +67,7 @@ #define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \ IH_MPUIO_BASE + ((nr) & 0x0f) : \ - IH_GPIO_BASE + ((nr) & 0x3f)) + IH_GPIO_BASE + (nr)) extern int omap_gpio_init(void); /* Call from board init only */ extern int omap_request_gpio(int gpio); diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h index 60201e1..5406b87 100644 --- a/include/asm-arm/arch-omap/hardware.h +++ b/include/asm-arm/arch-omap/hardware.h @@ -267,8 +267,6 @@ #define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) #define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) -#ifndef __ASSEMBLER__ - /* * --------------------------------------------------------------------------- * Processor specific defines @@ -277,13 +275,11 @@ #include "omap730.h" #include "omap1510.h" - -#ifdef CONFIG_ARCH_OMAP24XX #include "omap24xx.h" -#endif - #include "omap16xx.h" +#ifndef __ASSEMBLER__ + /* * --------------------------------------------------------------------------- * Board specific defines diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index 3d5bcd5..f5bcc9a 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -52,23 +52,33 @@ * ---------------------------------------------------------------------------- */ +#define PCIO_BASE 0 + #if defined(CONFIG_ARCH_OMAP1) + #define IO_PHYS 0xFFFB0000 -#define IO_OFFSET -0x01000000 /* Virtual IO = 0xfefb0000 */ +#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ #define IO_SIZE 0x40000 +#define IO_VIRT (IO_PHYS - IO_OFFSET) +#define IO_ADDRESS(pa) ((pa) - IO_OFFSET) +#define io_p2v(pa) ((pa) - IO_OFFSET) +#define io_v2p(va) ((va) + IO_OFFSET) #elif defined(CONFIG_ARCH_OMAP2) -#define IO_PHYS 0x48000000 /* L4 peripherals; other stuff has to be mapped * - * manually. */ -#define IO_OFFSET 0x90000000 /* Virtual IO = 0xd8000000 */ -#define IO_SIZE 0x08000000 -#endif -#define IO_VIRT (IO_PHYS + IO_OFFSET) -#define IO_ADDRESS(x) ((x) + IO_OFFSET) -#define PCIO_BASE 0 -#define io_p2v(x) ((x) + IO_OFFSET) -#define io_v2p(x) ((x) - IO_OFFSET) +/* We map both L3 and L4 on OMAP2 */ +#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */ +#define L3_24XX_VIRT 0xf8000000 +#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ +#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */ +#define L4_24XX_VIRT 0xd8000000 +#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ +#define IO_OFFSET 0x90000000 +#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ + +#endif #ifndef __ASSEMBLER__ diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 74e108c..9779686 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -22,8 +22,8 @@ * are different. */ -#ifndef __ASM_ARCH_OMAP1510_IRQS_H -#define __ASM_ARCH_OMAP1510_IRQS_H +#ifndef __ASM_ARCH_OMAP15XX_IRQS_H +#define __ASM_ARCH_OMAP15XX_IRQS_H /* * IRQ numbers for interrupt handler 1 @@ -31,7 +31,6 @@ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below * */ -#define INT_IH2_IRQ 0 #define INT_CAMERA 1 #define INT_FIQ 3 #define INT_RTDX 6 @@ -60,6 +59,7 @@ /* * OMAP-1510 specific IRQ numbers for interrupt handler 1 */ +#define INT_1510_IH2_IRQ 0 #define INT_1510_RES2 2 #define INT_1510_SPI_TX 4 #define INT_1510_SPI_RX 5 @@ -71,6 +71,7 @@ /* * OMAP-1610 specific IRQ numbers for interrupt handler 1 */ +#define INT_1610_IH2_IRQ 0 #define INT_1610_IH2_FIQ 2 #define INT_1610_McBSP2_TX 4 #define INT_1610_McBSP2_RX 5 @@ -231,6 +232,12 @@ #define INT_730_DMA_CH15 (62 + IH2_BASE) #define INT_730_NAND (63 + IH2_BASE) +#define INT_24XX_SYS_NIRQ 7 +#define INT_24XX_SDMA_IRQ0 12 +#define INT_24XX_SDMA_IRQ1 13 +#define INT_24XX_SDMA_IRQ2 14 +#define INT_24XX_SDMA_IRQ3 15 +#define INT_24XX_DSS_IRQ 25 #define INT_24XX_GPIO_BANK1 29 #define INT_24XX_GPIO_BANK2 30 #define INT_24XX_GPIO_BANK3 31 diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h index bf545b6..df50dd5 100644 --- a/include/asm-arm/arch-omap/memory.h +++ b/include/asm-arm/arch-omap/memory.h @@ -61,7 +61,7 @@ * Note that the is_lbus_device() test is not very efficient on 1510 * because of the strncmp(). */ -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX /* * OMAP-1510 Local Bus address offset @@ -84,7 +84,7 @@ virt_to_lbus(addr) : \ __virt_to_bus(addr);}) -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #endif diff --git a/include/asm-arm/arch-omap/menelaus.h b/include/asm-arm/arch-omap/menelaus.h new file mode 100644 index 0000000..46be8b8 --- /dev/null +++ b/include/asm-arm/arch-omap/menelaus.h @@ -0,0 +1,22 @@ +/* + * linux/include/asm-arm/arch-omap/menelaus.h + * + * Functions to access Menelaus power management chip + */ + +#ifndef __ASM_ARCH_MENELAUS_H +#define __ASM_ARCH_MENELAUS_H + +extern void menelaus_mmc_register(void (*callback)(u8 card_mask), + unsigned long data); +extern void menelaus_mmc_remove(void); +extern void menelaus_mmc_opendrain(int enable); + +#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS) +#define omap_has_menelaus() 1 +#else +#define omap_has_menelaus() 0 +#endif + +#endif + diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h index 1b1ad41..13415a9a 100644 --- a/include/asm-arm/arch-omap/mux.h +++ b/include/asm-arm/arch-omap/mux.h @@ -4,7 +4,7 @@ * Table of the Omap register configurations for the FUNC_MUX and * PULL_DWN combinations. * - * Copyright (C) 2003 Nokia Corporation + * Copyright (C) 2003 - 2005 Nokia Corporation * * Written by Tony Lindgren <tony.lindgren@nokia.com> * @@ -58,6 +58,16 @@ .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, +#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ + .mux_reg = OMAP730_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ + .pull_reg = OMAP730_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + #else #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ @@ -71,6 +81,15 @@ #define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, +#define MUX_REG_730(reg, mode_offset, mode) \ + .mux_reg = OMAP730_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + #endif /* CONFIG_OMAP_MUX_DEBUG */ #define MUX_CFG(desc, mux_reg, mode_offset, mode, \ @@ -84,13 +103,44 @@ PU_PD_REG(pu_pd_reg, pu_pd_status) \ }, + +/* + * OMAP730 has a slightly different config for the pin mux. + * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and + * not the FUNC_MUX_CTRL_x regs from hardware.h + * - for pull-up/down, only has one enable bit which is is in the same register + * as mux config + */ +#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ + pull_reg, pull_bit, pull_status, \ + pu_pd_reg, pu_pd_status, debug_status)\ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG_730(mux_reg, mode_offset, mode) \ + PULL_REG_730(mux_reg, pull_bit, pull_status) \ + PU_PD_REG(pu_pd_reg, pu_pd_status) \ +}, + +#define MUX_CFG_24XX(desc, reg_offset, mode, \ + pull_en, pull_mode, dbg) \ +{ \ + .name = desc, \ + .debug = dbg, \ + .mux_reg = reg_offset, \ + .mask = mode, \ + .pull_val = pull_en, \ + .pu_pd_val = pull_mode, \ +}, + + #define PULL_DISABLED 0 #define PULL_ENABLED 1 #define PULL_DOWN 0 #define PULL_UP 1 -typedef struct { +struct pin_config { char *name; unsigned char busy; unsigned char debug; @@ -108,13 +158,23 @@ typedef struct { const char *pu_pd_name; const unsigned int pu_pd_reg; const unsigned char pu_pd_val; -} reg_cfg_set; +}; -/* - * Lookup table for FUNC_MUX and PULL_DWN register combinations for each - * device. See also reg_cfg_table below for the register values. - */ -typedef enum { +enum omap730_index { + /* OMAP 730 keyboard */ + E2_730_KBR0, + J7_730_KBR1, + E1_730_KBR2, + F3_730_KBR3, + D2_730_KBR4, + C2_730_KBC0, + D3_730_KBC1, + E4_730_KBC2, + F4_730_KBC3, + E3_730_KBC4, +}; + +enum omap1xxx_index { /* UART1 (BT_UART_GATING)*/ UART1_TX = 0, UART1_RTS, @@ -331,245 +391,34 @@ typedef enum { V10_1610_CF_IREQ, W10_1610_CF_RESET, W11_1610_CF_CD1, -} reg_cfg_t; +}; -#if defined(__MUX_C__) && defined(CONFIG_OMAP_MUX) +enum omap24xx_index { + /* 24xx I2C */ + M19_24XX_I2C1_SCL, + L15_24XX_I2C1_SDA, + J15_24XX_I2C2_SCL, + H19_24XX_I2C2_SDA, -/* - * Table of various FUNC_MUX and PULL_DWN combinations for each device. - * See also reg_cfg_t above for the lookup table. - */ -static const reg_cfg_set __initdata_or_module -reg_cfg_table[] = { -/* - * description mux mode mux pull pull pull pu_pd pu dbg - * reg offset mode reg bit ena reg - */ -MUX_CFG("UART1_TX", 9, 21, 1, 2, 3, 0, NA, 0, 0) -MUX_CFG("UART1_RTS", 9, 12, 1, 2, 0, 0, NA, 0, 0) - -/* UART2 (COM_UART_GATING), conflicts with USB2 */ -MUX_CFG("UART2_TX", C, 27, 1, 3, 3, 0, NA, 0, 0) -MUX_CFG("UART2_RX", C, 18, 0, 3, 1, 1, NA, 0, 0) -MUX_CFG("UART2_CTS", C, 21, 0, 3, 1, 1, NA, 0, 0) -MUX_CFG("UART2_RTS", C, 24, 1, 3, 2, 0, NA, 0, 0) - -/* UART3 (GIGA_UART_GATING) */ -MUX_CFG("UART3_TX", 6, 0, 1, 0, 30, 0, NA, 0, 0) -MUX_CFG("UART3_RX", 6, 3, 0, 0, 31, 1, NA, 0, 0) -MUX_CFG("UART3_CTS", 5, 12, 2, 0, 24, 0, NA, 0, 0) -MUX_CFG("UART3_RTS", 5, 15, 2, 0, 25, 0, NA, 0, 0) -MUX_CFG("UART3_CLKREQ", 9, 27, 0, 2, 5, 0, NA, 0, 0) -MUX_CFG("UART3_BCLK", A, 0, 0, 2, 6, 0, NA, 0, 0) -MUX_CFG("Y15_1610_UART3_RTS", A, 0, 1, 2, 6, 0, NA, 0, 0) - -/* PWT & PWL, conflicts with UART3 */ -MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0) -MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0) - -/* USB internal master generic */ -MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1) -MUX_CFG("R18_1510_USB_GPIO0", 7, 9, 0, 1, 11, 1, NA, 0, 1) -/* works around erratum: W4_USB_PUEN and W4_USB_PUDIS are switched! */ -MUX_CFG("W4_USB_PUEN", D, 3, 3, 3, 5, 1, NA, 0, 1) -MUX_CFG("W4_USB_CLKO", D, 3, 1, 3, 5, 0, NA, 0, 1) -MUX_CFG("W4_USB_HIGHZ", D, 3, 4, 3, 5, 0, 3, 0, 1) -MUX_CFG("W4_GPIO58", D, 3, 7, 3, 5, 0, 3, 0, 1) - -/* USB1 master */ -MUX_CFG("USB1_SUSP", 8, 27, 2, 1, 27, 0, NA, 0, 1) -MUX_CFG("USB1_SE0", 9, 0, 2, 1, 28, 0, NA, 0, 1) -MUX_CFG("W13_1610_USB1_SE0", 9, 0, 4, 1, 28, 0, NA, 0, 1) -MUX_CFG("USB1_TXEN", 9, 3, 2, 1, 29, 0, NA, 0, 1) -MUX_CFG("USB1_TXD", 9, 24, 1, 2, 4, 0, NA, 0, 1) -MUX_CFG("USB1_VP", A, 3, 1, 2, 7, 0, NA, 0, 1) -MUX_CFG("USB1_VM", A, 6, 1, 2, 8, 0, NA, 0, 1) -MUX_CFG("USB1_RCV", A, 9, 1, 2, 9, 0, NA, 0, 1) -MUX_CFG("USB1_SPEED", A, 12, 2, 2, 10, 0, NA, 0, 1) -MUX_CFG("R13_1610_USB1_SPEED", A, 12, 5, 2, 10, 0, NA, 0, 1) -MUX_CFG("R13_1710_USB1_SEO", A, 12, 5, 2, 10, 0, NA, 0, 1) - -/* USB2 master */ -MUX_CFG("USB2_SUSP", B, 3, 1, 2, 17, 0, NA, 0, 1) -MUX_CFG("USB2_VP", B, 6, 1, 2, 18, 0, NA, 0, 1) -MUX_CFG("USB2_TXEN", B, 9, 1, 2, 19, 0, NA, 0, 1) -MUX_CFG("USB2_VM", C, 18, 1, 3, 0, 0, NA, 0, 1) -MUX_CFG("USB2_RCV", C, 21, 1, 3, 1, 0, NA, 0, 1) -MUX_CFG("USB2_SE0", C, 24, 2, 3, 2, 0, NA, 0, 1) -MUX_CFG("USB2_TXD", C, 27, 2, 3, 3, 0, NA, 0, 1) - -/* OMAP-1510 GPIO */ -MUX_CFG("R18_1510_GPIO0", 7, 9, 0, 1, 11, 1, 0, 0, 1) -MUX_CFG("R19_1510_GPIO1", 7, 6, 0, 1, 10, 1, 0, 0, 1) -MUX_CFG("M14_1510_GPIO2", 7, 3, 0, 1, 9, 1, 0, 0, 1) - -/* OMAP1610 GPIO */ -MUX_CFG("P18_1610_GPIO3", 7, 0, 0, 1, 8, 0, NA, 0, 1) -MUX_CFG("Y15_1610_GPIO17", A, 0, 7, 2, 6, 0, NA, 0, 1) - -/* OMAP-1710 GPIO */ -MUX_CFG("R18_1710_GPIO0", 7, 9, 0, 1, 11, 1, 1, 1, 1) -MUX_CFG("V2_1710_GPIO10", F, 27, 1, 4, 3, 1, 4, 1, 1) -MUX_CFG("N21_1710_GPIO14", 6, 9, 0, 1, 1, 1, 1, 1, 1) -MUX_CFG("W15_1710_GPIO40", 9, 27, 7, 2, 5, 1, 2, 1, 1) - -/* MPUIO */ -MUX_CFG("MPUIO2", 7, 18, 0, 1, 14, 1, NA, 0, 1) -MUX_CFG("N15_1610_MPUIO2", 7, 18, 0, 1, 14, 1, 1, 0, 1) -MUX_CFG("MPUIO4", 7, 15, 0, 1, 13, 1, NA, 0, 1) -MUX_CFG("MPUIO5", 7, 12, 0, 1, 12, 1, NA, 0, 1) - -MUX_CFG("T20_1610_MPUIO5", 7, 12, 0, 1, 12, 0, 3, 0, 1) -MUX_CFG("W11_1610_MPUIO6", 10, 15, 2, 3, 8, 0, 3, 0, 1) -MUX_CFG("V10_1610_MPUIO7", A, 24, 2, 2, 14, 0, 2, 0, 1) -MUX_CFG("W11_1610_MPUIO9", 10, 15, 1, 3, 8, 0, 3, 0, 1) -MUX_CFG("V10_1610_MPUIO10", A, 24, 1, 2, 14, 0, 2, 0, 1) -MUX_CFG("W10_1610_MPUIO11", A, 18, 2, 2, 11, 0, 2, 0, 1) -MUX_CFG("E20_1610_MPUIO13", 3, 21, 1, 0, 7, 0, 0, 0, 1) -MUX_CFG("U20_1610_MPUIO14", 9, 6, 6, 0, 30, 0, 0, 0, 1) -MUX_CFG("E19_1610_MPUIO15", 3, 18, 1, 0, 6, 0, 0, 0, 1) - -/* MCBSP2 */ -MUX_CFG("MCBSP2_CLKR", C, 6, 0, 2, 27, 1, NA, 0, 1) -MUX_CFG("MCBSP2_CLKX", C, 9, 0, 2, 29, 1, NA, 0, 1) -MUX_CFG("MCBSP2_DR", C, 0, 0, 2, 26, 1, NA, 0, 1) -MUX_CFG("MCBSP2_DX", C, 15, 0, 2, 31, 1, NA, 0, 1) -MUX_CFG("MCBSP2_FSR", C, 12, 0, 2, 30, 1, NA, 0, 1) -MUX_CFG("MCBSP2_FSX", C, 3, 0, 2, 27, 1, NA, 0, 1) - -/* MCBSP3 NOTE: Mode must 1 for clock */ -MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1) - -/* Misc ballouts */ -MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1) -MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0) - -/* OMAP-1610 MMC2 */ -MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1) -MUX_CFG("V8_1610_MMC2_DAT1", B, 27, 6, 2, 25, 1, 2, 1, 1) -MUX_CFG("W15_1610_MMC2_DAT2", 9, 12, 6, 2, 5, 1, 2, 1, 1) -MUX_CFG("R10_1610_MMC2_DAT3", B, 18, 6, 2, 22, 1, 2, 1, 1) -MUX_CFG("Y10_1610_MMC2_CLK", B, 3, 6, 2, 17, 0, 2, 0, 1) -MUX_CFG("Y8_1610_MMC2_CMD", B, 24, 6, 2, 24, 1, 2, 1, 1) -MUX_CFG("V9_1610_MMC2_CMDDIR", B, 12, 6, 2, 20, 0, 2, 1, 1) -MUX_CFG("V5_1610_MMC2_DATDIR0", B, 15, 6, 2, 21, 0, 2, 1, 1) -MUX_CFG("W19_1610_MMC2_DATDIR1", 8, 15, 6, 1, 23, 0, 1, 1, 1) -MUX_CFG("R18_1610_MMC2_CLKIN", 7, 9, 6, 1, 11, 0, 1, 11, 1) - -/* OMAP-1610 External Trace Interface */ -MUX_CFG("M19_1610_ETM_PSTAT0", 5, 27, 1, 0, 29, 0, 0, 0, 1) -MUX_CFG("L15_1610_ETM_PSTAT1", 5, 24, 1, 0, 28, 0, 0, 0, 1) -MUX_CFG("L18_1610_ETM_PSTAT2", 5, 21, 1, 0, 27, 0, 0, 0, 1) -MUX_CFG("L19_1610_ETM_D0", 5, 18, 1, 0, 26, 0, 0, 0, 1) -MUX_CFG("J19_1610_ETM_D6", 5, 0, 1, 0, 20, 0, 0, 0, 1) -MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1) - -/* OMAP16XX GPIO */ -MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1) -MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1) -MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1) -MUX_CFG("N20_1610_GPIO11", 6, 18, 0, 1, 4, 0, 1, 1, 1) -MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1) -MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1) -MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1) -MUX_CFG("AA20_1610_GPIO_41", 9, 9, 7, 1, 31, 0, 1, 1, 1) -MUX_CFG("W19_1610_GPIO48", 8, 15, 7, 1, 23, 1, 1, 0, 1) -MUX_CFG("M7_1610_GPIO62", 10, 0, 0, 4, 24, 0, 4, 0, 1) -MUX_CFG("V14_16XX_GPIO37", 9, 18, 7, 2, 2, 0, 2, 2, 0) -MUX_CFG("R9_16XX_GPIO18", C, 18, 7, 3, 0, 0, 3, 0, 0) -MUX_CFG("L14_16XX_GPIO49", 6, 3, 7, 0, 31, 0, 0, 31, 0) - -/* OMAP-1610 uWire */ -MUX_CFG("V19_1610_UWIRE_SCLK", 8, 6, 0, 1, 20, 0, 1, 1, 1) -MUX_CFG("U18_1610_UWIRE_SDI", 8, 0, 0, 1, 18, 0, 1, 1, 1) -MUX_CFG("W21_1610_UWIRE_SDO", 8, 3, 0, 1, 19, 0, 1, 1, 1) -MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1) -MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1) -MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1) - -/* OMAP-1610 Flash */ -MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1) -MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1) - -/* First MMC interface, same on 1510, 1610 and 1710 */ -MUX_CFG("MMC_CMD", A, 27, 0, 2, 15, 1, 2, 1, 1) -MUX_CFG("MMC_DAT1", A, 24, 0, 2, 14, 1, 2, 1, 1) -MUX_CFG("MMC_DAT2", A, 18, 0, 2, 12, 1, 2, 1, 1) -MUX_CFG("MMC_DAT0", B, 0, 0, 2, 16, 1, 2, 1, 1) -MUX_CFG("MMC_CLK", A, 21, 0, NA, 0, 0, NA, 0, 1) -MUX_CFG("MMC_DAT3", 10, 15, 0, 3, 8, 1, 3, 1, 1) -MUX_CFG("M15_1710_MMC_CLKI", 6, 21, 2, 0, 0, 0, NA, 0, 1) -MUX_CFG("P19_1710_MMC_CMDDIR", 6, 24, 6, 0, 0, 0, NA, 0, 1) -MUX_CFG("P20_1710_MMC_DATDIR0", 6, 27, 5, 0, 0, 0, NA, 0, 1) - -/* OMAP-1610 USB0 alternate configuration */ -MUX_CFG("W9_USB0_TXEN", B, 9, 5, 2, 19, 0, 2, 0, 1) -MUX_CFG("AA9_USB0_VP", B, 6, 5, 2, 18, 0, 2, 0, 1) -MUX_CFG("Y5_USB0_RCV", C, 21, 5, 3, 1, 0, 1, 0, 1) -MUX_CFG("R9_USB0_VM", C, 18, 5, 3, 0, 0, 3, 0, 1) -MUX_CFG("V6_USB0_TXD", C, 27, 5, 3, 3, 0, 3, 0, 1) -MUX_CFG("W5_USB0_SE0", C, 24, 5, 3, 2, 0, 3, 0, 1) -MUX_CFG("V9_USB0_SPEED", B, 12, 5, 2, 20, 0, 2, 0, 1) -MUX_CFG("Y10_USB0_SUSP", B, 3, 5, 2, 17, 0, 2, 0, 1) - -/* USB2 interface */ -MUX_CFG("W9_USB2_TXEN", B, 9, 1, NA, 0, 0, NA, 0, 1) -MUX_CFG("AA9_USB2_VP", B, 6, 1, NA, 0, 0, NA, 0, 1) -MUX_CFG("Y5_USB2_RCV", C, 21, 1, NA, 0, 0, NA, 0, 1) -MUX_CFG("R9_USB2_VM", C, 18, 1, NA, 0, 0, NA, 0, 1) -MUX_CFG("V6_USB2_TXD", C, 27, 2, NA, 0, 0, NA, 0, 1) -MUX_CFG("W5_USB2_SE0", C, 24, 2, NA, 0, 0, NA, 0, 1) - -/* 16XX UART */ -MUX_CFG("R13_1610_UART1_TX", A, 12, 6, 2, 10, 0, 2, 10, 1) -MUX_CFG("V14_16XX_UART1_RX", 9, 18, 0, 2, 2, 0, 2, 2, 1) -MUX_CFG("R14_1610_UART1_CTS", 9, 15, 0, 2, 1, 0, 2, 1, 1) -MUX_CFG("AA15_1610_UART1_RTS", 9, 12, 1, 2, 0, 0, 2, 0, 1) -MUX_CFG("R9_16XX_UART2_RX", C, 18, 0, 3, 0, 0, 3, 0, 1) -MUX_CFG("L14_16XX_UART3_RX", 6, 3, 0, 0, 31, 0, 0, 31, 1) - -/* I2C interface */ -MUX_CFG("I2C_SCL", 7, 24, 0, NA, 0, 0, NA, 0, 0) -MUX_CFG("I2C_SDA", 7, 27, 0, NA, 0, 0, NA, 0, 0) - -/* Keypad */ -MUX_CFG("F18_1610_KBC0", 3, 15, 0, 0, 5, 1, 0, 0, 0) -MUX_CFG("D20_1610_KBC1", 3, 12, 0, 0, 4, 1, 0, 0, 0) -MUX_CFG("D19_1610_KBC2", 3, 9, 0, 0, 3, 1, 0, 0, 0) -MUX_CFG("E18_1610_KBC3", 3, 6, 0, 0, 2, 1, 0, 0, 0) -MUX_CFG("C21_1610_KBC4", 3, 3, 0, 0, 1, 1, 0, 0, 0) -MUX_CFG("G18_1610_KBR0", 4, 0, 0, 0, 10, 1, 0, 1, 0) -MUX_CFG("F19_1610_KBR1", 3, 27, 0, 0, 9, 1, 0, 1, 0) -MUX_CFG("H14_1610_KBR2", 3, 24, 0, 0, 8, 1, 0, 1, 0) -MUX_CFG("E20_1610_KBR3", 3, 21, 0, 0, 7, 1, 0, 1, 0) -MUX_CFG("E19_1610_KBR4", 3, 18, 0, 0, 6, 1, 0, 1, 0) -MUX_CFG("N19_1610_KBR5", 6, 12, 1, 1, 2, 1, 1, 1, 0) - -/* Power management */ -MUX_CFG("T20_1610_LOW_PWR", 7, 12, 1, NA, 0, 0, NA, 0, 0) - -/* MCLK Settings */ -MUX_CFG("V5_1710_MCLK_ON", B, 15, 0, NA, 0, 0, NA, 0, 0) -MUX_CFG("V5_1710_MCLK_OFF", B, 15, 6, NA, 0, 0, NA, 0, 0) -MUX_CFG("R10_1610_MCLK_ON", B, 18, 0, NA, 22, 0, NA, 1, 0) -MUX_CFG("R10_1610_MCLK_OFF", B, 18, 6, 2, 22, 1, 2, 1, 1) - -/* CompactFlash controller, conflicts with MMC1 */ -MUX_CFG("P11_1610_CF_CD2", A, 27, 3, 2, 15, 1, 2, 1, 1) -MUX_CFG("R11_1610_CF_IOIS16", B, 0, 3, 2, 16, 1, 2, 1, 1) -MUX_CFG("V10_1610_CF_IREQ", A, 24, 3, 2, 14, 0, 2, 0, 1) -MUX_CFG("W10_1610_CF_RESET", A, 18, 3, 2, 12, 1, 2, 1, 1) -MUX_CFG("W11_1610_CF_CD1", 10, 15, 3, 3, 8, 1, 3, 1, 1) -}; + /* 24xx Menelaus interrupt */ + W19_24XX_SYS_NIRQ, -#endif /* __MUX_C__ */ + /* 24xx GPIO */ + Y20_24XX_GPIO60, + M15_24XX_GPIO92, +}; #ifdef CONFIG_OMAP_MUX /* setup pin muxing in Linux */ -extern int omap_cfg_reg(reg_cfg_t reg_cfg); +extern int omap1_mux_init(void); +extern int omap2_mux_init(void); +extern int omap_mux_register(struct pin_config * pins, unsigned long size); +extern int omap_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ -static inline int omap_cfg_reg(reg_cfg_t reg_cfg) { return 0; } +static inline int omap1_mux_init(void) { return 0; } +static inline int omap2_mux_init(void) { return 0; } +static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } #endif #endif diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h index f086a39..c575d35 100644 --- a/include/asm-arm/arch-omap/omap1510.h +++ b/include/asm-arm/arch-omap/omap1510.h @@ -25,8 +25,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __ASM_ARCH_OMAP1510_H -#define __ASM_ARCH_OMAP1510_H +#ifndef __ASM_ARCH_OMAP15XX_H +#define __ASM_ARCH_OMAP15XX_H /* * ---------------------------------------------------------------------------- @@ -44,5 +44,5 @@ #define OMAP1510_DSPREG_SIZE SZ_128K #define OMAP1510_DSPREG_START 0xE1000000 -#endif /* __ASM_ARCH_OMAP1510_H */ +#endif /* __ASM_ARCH_OMAP15XX_H */ diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h index a910546..6e59805 100644 --- a/include/asm-arm/arch-omap/omap24xx.h +++ b/include/asm-arm/arch-omap/omap24xx.h @@ -1,15 +1,24 @@ #ifndef __ASM_ARCH_OMAP24XX_H #define __ASM_ARCH_OMAP24XX_H -#define OMAP24XX_L4_IO_BASE 0x48000000 +/* + * Please place only base defines here and put the rest in device + * specific headers. Note also that some of these defines are needed + * for omap1 to compile without adding ifdefs. + */ + +#define L4_24XX_BASE 0x48000000 +#define L3_24XX_BASE 0x68000000 /* interrupt controller */ -#define OMAP24XX_IC_BASE (OMAP24XX_L4_IO_BASE + 0xfe000) +#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) #define VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) - #define OMAP24XX_IVA_INTC_BASE 0x40000000 - #define IRQ_SIR_IRQ 0x0040 +#define OMAP24XX_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) +#define OMAP24XX_PRCM_BASE (L4_24XX_BASE + 0x8000) +#define OMAP24XX_SDRC_BASE (L3_24XX_BASE + 0x9000) + #endif /* __ASM_ARCH_OMAP24XX_H */ diff --git a/include/asm-arm/arch-omap/omapfb.h b/include/asm-arm/arch-omap/omapfb.h new file mode 100644 index 0000000..4ba2622 --- /dev/null +++ b/include/asm-arm/arch-omap/omapfb.h @@ -0,0 +1,281 @@ +/* + * File: include/asm-arm/arch-omap/omapfb.h + * + * Framebuffer driver for TI OMAP boards + * + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAPFB_H +#define __OMAPFB_H + +/* IOCTL commands. */ + +#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) +#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) +#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) +#define OMAP_IO(num) _IO('O', num) + +#define OMAPFB_MIRROR OMAP_IOW(31, int) +#define OMAPFB_SYNC_GFX OMAP_IO(37) +#define OMAPFB_VSYNC OMAP_IO(38) +#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, enum omapfb_update_mode) +#define OMAPFB_GET_CAPS OMAP_IOR(42, unsigned long) +#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, enum omapfb_update_mode) +#define OMAPFB_LCD_TEST OMAP_IOW(45, int) +#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) +#define OMAPFB_UPDATE_WINDOW OMAP_IOW(47, struct omapfb_update_window) +#define OMAPFB_SETUP_PLANE OMAP_IOW(48, struct omapfb_setup_plane) +#define OMAPFB_ENABLE_PLANE OMAP_IOW(49, struct omapfb_enable_plane) +#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) + +#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff +#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 +#define OMAPFB_CAPS_PANEL_MASK 0xff000000 + +#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 +#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 + +/* Values from DSP must map to lower 16-bits */ +#define OMAPFB_FORMAT_MASK 0x00ff +#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 + +enum omapfb_color_format { + OMAPFB_COLOR_RGB565 = 0, + OMAPFB_COLOR_YUV422, + OMAPFB_COLOR_YUV420, + OMAPFB_COLOR_CLUT_8BPP, + OMAPFB_COLOR_CLUT_4BPP, + OMAPFB_COLOR_CLUT_2BPP, + OMAPFB_COLOR_CLUT_1BPP, +}; + +struct omapfb_update_window { + u32 x, y; + u32 width, height; + u32 format; +}; + +enum omapfb_plane { + OMAPFB_PLANE_GFX = 0, + OMAPFB_PLANE_VID1, + OMAPFB_PLANE_VID2, +}; + +enum omapfb_channel_out { + OMAPFB_CHANNEL_OUT_LCD = 0, + OMAPFB_CHANNEL_OUT_DIGIT, +}; + +struct omapfb_setup_plane { + u8 plane; + u8 channel_out; + u32 offset; + u32 pos_x, pos_y; + u32 width, height; + u32 color_mode; +}; + +struct omapfb_enable_plane { + u8 plane; + u8 enable; +}; + +enum omapfb_color_key_type { + OMAPFB_COLOR_KEY_DISABLED = 0, + OMAPFB_COLOR_KEY_GFX_DST, + OMAPFB_COLOR_KEY_VID_SRC, +}; + +struct omapfb_color_key { + u8 channel_out; + u32 background; + u32 trans_key; + u8 key_type; +}; + +enum omapfb_update_mode { + OMAPFB_UPDATE_DISABLED = 0, + OMAPFB_AUTO_UPDATE, + OMAPFB_MANUAL_UPDATE +}; + +#ifdef __KERNEL__ + +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/fb.h> + +#define OMAP_LCDC_INV_VSYNC 0x0001 +#define OMAP_LCDC_INV_HSYNC 0x0002 +#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 +#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 +#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 +#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 + +#define OMAP_LCDC_SIGNAL_MASK 0x003f + +#define OMAP_LCDC_PANEL_TFT 0x0100 + +#ifdef CONFIG_ARCH_OMAP1 +#define OMAPFB_PLANE_NUM 1 +#else +#define OMAPFB_PLANE_NUM 3 +#endif + +struct omapfb_device; + +struct lcd_panel { + const char *name; + int config; /* TFT/STN, signal inversion */ + int bpp; /* Pixel format in fb mem */ + int data_lines; /* Lines on LCD HW interface */ + + int x_res, y_res; + int pixel_clock; /* In kHz */ + int hsw; /* Horizontal synchronization + pulse width */ + int hfp; /* Horizontal front porch */ + int hbp; /* Horizontal back porch */ + int vsw; /* Vertical synchronization + pulse width */ + int vfp; /* Vertical front porch */ + int vbp; /* Vertical back porch */ + int acb; /* ac-bias pin frequency */ + int pcd; /* pixel clock divider. + Obsolete use pixel_clock instead */ + + int (*init) (struct omapfb_device *fbdev); + void (*cleanup) (void); + int (*enable) (void); + void (*disable) (void); + unsigned long (*get_caps) (void); + int (*set_bklight_level)(unsigned int level); + unsigned int (*get_bklight_level)(void); + unsigned int (*get_bklight_max) (void); + int (*run_test) (int test_num); +}; + +struct omapfb_device; + +struct extif_timings { + int cs_on_time; + int cs_off_time; + int we_on_time; + int we_off_time; + int re_on_time; + int re_off_time; + int we_cycle_time; + int re_cycle_time; + int cs_pulse_width; + int access_time; +}; + +struct lcd_ctrl_extif { + int (*init) (void); + void (*cleanup) (void); + void (*set_timings) (const struct extif_timings *timings); + void (*write_command) (u32 cmd); + u32 (*read_data) (void); + void (*write_data) (u32 data); + void (*transfer_area) (int width, int height, + void (callback)(void * data), void *data); +}; + +struct lcd_ctrl { + const char *name; + void *data; + + int (*init) (struct omapfb_device *fbdev, + int ext_mode, int req_vram_size); + void (*cleanup) (void); + void (*get_vram_layout)(unsigned long *size, + void **virt_base, + dma_addr_t *phys_base); + unsigned long (*get_caps) (void); + int (*set_update_mode)(enum omapfb_update_mode mode); + enum omapfb_update_mode (*get_update_mode)(void); + int (*setup_plane) (int plane, int channel_out, + unsigned long offset, + int screen_width, + int pos_x, int pos_y, int width, + int height, int color_mode); + int (*enable_plane) (int plane, int enable); + int (*update_window) (struct omapfb_update_window *win, + void (*callback)(void *), + void *callback_data); + void (*sync) (void); + void (*suspend) (void); + void (*resume) (void); + int (*run_test) (int test_num); + int (*setcolreg) (u_int regno, u16 red, u16 green, + u16 blue, u16 transp, + int update_hw_mem); + int (*set_color_key) (struct omapfb_color_key *ck); + +}; + +enum omapfb_state { + OMAPFB_DISABLED = 0, + OMAPFB_SUSPENDED= 99, + OMAPFB_ACTIVE = 100 +}; + +struct omapfb_device { + int state; + int ext_lcdc; /* Using external + LCD controller */ + struct semaphore rqueue_sema; + + void *vram_virt_base; + dma_addr_t vram_phys_base; + unsigned long vram_size; + + int color_mode; + int palette_size; + int mirror; + u32 pseudo_palette[17]; + + struct lcd_panel *panel; /* LCD panel */ + struct lcd_ctrl *ctrl; /* LCD controller */ + struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ + struct lcd_ctrl_extif *ext_if; /* LCD ctrl external + interface */ + struct fb_info *fb_info; + + struct device *dev; +}; + +extern struct lcd_panel h3_panel; +extern struct lcd_panel h2_panel; +extern struct lcd_panel p2_panel; +extern struct lcd_panel osk_panel; +extern struct lcd_panel innovator1610_panel; +extern struct lcd_panel innovator1510_panel; + +#ifdef CONFIG_ARCH_OMAP1 +extern struct lcd_ctrl omap1_lcd_ctrl; +#else +extern struct lcd_ctrl omap2_disp_ctrl; +#endif + +extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); + +#endif /* __KERNEL__ */ + +#endif /* __OMAPFB_H */ diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h index fbd742d..7c79042 100644 --- a/include/asm-arm/arch-omap/pm.h +++ b/include/asm-arm/arch-omap/pm.h @@ -98,7 +98,14 @@ #define OMAP1610_IDLECT3 0xfffece24 #define OMAP1610_IDLE_LOOP_REQUEST 0x0400 -#if !defined(CONFIG_ARCH_OMAP1510) && \ +#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 +#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP730_IDLECT3_VAL 0x3f +#define OMAP730_IDLECT3 0xfffece24 +#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 + +#if !defined(CONFIG_ARCH_OMAP730) && \ + !defined(CONFIG_ARCH_OMAP15XX) && \ !defined(CONFIG_ARCH_OMAP16XX) && \ !defined(CONFIG_ARCH_OMAP24XX) #error "Power management for this processor not implemented yet" @@ -107,8 +114,10 @@ #ifndef __ASSEMBLER__ extern void omap_pm_idle(void); extern void omap_pm_suspend(void); +extern void omap730_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); +extern void omap730_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); @@ -118,6 +127,8 @@ extern void omap_serial_wake_trigger(int enable); #define omap_serial_wake_trigger(x) {} #endif /* CONFIG_OMAP_SERIAL_WAKE */ +extern unsigned int omap730_cpu_suspend_sz; +extern unsigned int omap730_idle_loop_suspend_sz; extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; @@ -131,6 +142,10 @@ extern unsigned int omap1610_idle_loop_suspend_sz; #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] +#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) +#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] + #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) #define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] @@ -188,13 +203,34 @@ enum mpui1510_save_state { MPUI1510_SLEEP_SAVE_EMIFS_CONFIG, MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR, MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR, -#if defined(CONFIG_ARCH_OMAP1510) +#if defined(CONFIG_ARCH_OMAP15XX) MPUI1510_SLEEP_SAVE_SIZE #else MPUI1510_SLEEP_SAVE_SIZE = 0 #endif }; +enum mpui730_save_state { + MPUI730_SLEEP_SAVE_START = 0, + /* + * MPUI registers 32 bits + */ + MPUI730_SLEEP_SAVE_MPUI_CTRL, + MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI730_SLEEP_SAVE_EMIFS_CONFIG, + MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, +#if defined(CONFIG_ARCH_OMAP730) + MPUI730_SLEEP_SAVE_SIZE +#else + MPUI730_SLEEP_SAVE_SIZE = 0 +#endif +}; + enum mpui1610_save_state { MPUI1610_SLEEP_SAVE_START = 0, /* diff --git a/include/asm-arm/arch-omap/prcm.h b/include/asm-arm/arch-omap/prcm.h new file mode 100644 index 0000000..7b48a5c --- /dev/null +++ b/include/asm-arm/arch-omap/prcm.h @@ -0,0 +1,429 @@ +/* + * prcm.h - Access definations for use in OMAP24XX clock and power management + * + * Copyright (C) 2005 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_DPM_PRCM_H +#define __ASM_ARM_ARCH_DPM_PRCM_H + +/* SET_PERFORMANCE_LEVEL PARAMETERS */ +#define PRCM_HALF_SPEED 1 +#define PRCM_FULL_SPEED 2 + +#ifndef __ASSEMBLER__ + +#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset)) + +#define PRCM_REVISION PRCM_REG32(0x000) +#define PRCM_SYSCONFIG PRCM_REG32(0x010) +#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018) +#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C) +#define PRCM_VOLTCTRL PRCM_REG32(0x050) +#define PRCM_VOLTST PRCM_REG32(0x054) +#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060) +#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070) +#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078) +#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080) +#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084) +#define PRCM_VOLTSETUP PRCM_REG32(0x090) +#define PRCM_CLKSSETUP PRCM_REG32(0x094) +#define PRCM_POLCTRL PRCM_REG32(0x098) + +/* GENERAL PURPOSE */ +#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0) +#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4) +#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8) +#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC) +#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0) +#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4) +#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8) +#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC) +#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0) +#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4) +#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8) +#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC) +#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0) +#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4) +#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8) +#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC) +#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0) +#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4) +#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8) +#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC) + +/* MPU */ +#define CM_CLKSEL_MPU PRCM_REG32(0x140) +#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148) +#define RM_RSTST_MPU PRCM_REG32(0x158) +#define PM_WKDEP_MPU PRCM_REG32(0x1C8) +#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4) +#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8) +#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC) +#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0) +#define PM_PWSTST_MPU PRCM_REG32(0x1E4) + +/* CORE */ +#define CM_FCLKEN1_CORE PRCM_REG32(0x200) +#define CM_FCLKEN2_CORE PRCM_REG32(0x204) +#define CM_FCLKEN3_CORE PRCM_REG32(0x208) +#define CM_ICLKEN1_CORE PRCM_REG32(0x210) +#define CM_ICLKEN2_CORE PRCM_REG32(0x214) +#define CM_ICLKEN3_CORE PRCM_REG32(0x218) +#define CM_ICLKEN4_CORE PRCM_REG32(0x21C) +#define CM_IDLEST1_CORE PRCM_REG32(0x220) +#define CM_IDLEST2_CORE PRCM_REG32(0x224) +#define CM_IDLEST3_CORE PRCM_REG32(0x228) +#define CM_IDLEST4_CORE PRCM_REG32(0x22C) +#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230) +#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234) +#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238) +#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C) +#define CM_CLKSEL1_CORE PRCM_REG32(0x240) +#define CM_CLKSEL2_CORE PRCM_REG32(0x244) +#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248) +#define PM_WKEN1_CORE PRCM_REG32(0x2A0) +#define PM_WKEN2_CORE PRCM_REG32(0x2A4) +#define PM_WKST1_CORE PRCM_REG32(0x2B0) +#define PM_WKST2_CORE PRCM_REG32(0x2B4) +#define PM_WKDEP_CORE PRCM_REG32(0x2C8) +#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0) +#define PM_PWSTST_CORE PRCM_REG32(0x2E4) + +/* GFX */ +#define CM_FCLKEN_GFX PRCM_REG32(0x300) +#define CM_ICLKEN_GFX PRCM_REG32(0x310) +#define CM_IDLEST_GFX PRCM_REG32(0x320) +#define CM_CLKSEL_GFX PRCM_REG32(0x340) +#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348) +#define RM_RSTCTRL_GFX PRCM_REG32(0x350) +#define RM_RSTST_GFX PRCM_REG32(0x358) +#define PM_WKDEP_GFX PRCM_REG32(0x3C8) +#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0) +#define PM_PWSTST_GFX PRCM_REG32(0x3E4) + +/* WAKE-UP */ +#define CM_FCLKEN_WKUP PRCM_REG32(0x400) +#define CM_ICLKEN_WKUP PRCM_REG32(0x410) +#define CM_IDLEST_WKUP PRCM_REG32(0x420) +#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430) +#define CM_CLKSEL_WKUP PRCM_REG32(0x440) +#define RM_RSTCTRL_WKUP PRCM_REG32(0x450) +#define RM_RSTTIME_WKUP PRCM_REG32(0x454) +#define RM_RSTST_WKUP PRCM_REG32(0x458) +#define PM_WKEN_WKUP PRCM_REG32(0x4A0) +#define PM_WKST_WKUP PRCM_REG32(0x4B0) + +/* CLOCKS */ +#define CM_CLKEN_PLL PRCM_REG32(0x500) +#define CM_IDLEST_CKGEN PRCM_REG32(0x520) +#define CM_AUTOIDLE_PLL PRCM_REG32(0x530) +#define CM_CLKSEL1_PLL PRCM_REG32(0x540) +#define CM_CLKSEL2_PLL PRCM_REG32(0x544) + +/* DSP */ +#define CM_FCLKEN_DSP PRCM_REG32(0x800) +#define CM_ICLKEN_DSP PRCM_REG32(0x810) +#define CM_IDLEST_DSP PRCM_REG32(0x820) +#define CM_AUTOIDLE_DSP PRCM_REG32(0x830) +#define CM_CLKSEL_DSP PRCM_REG32(0x840) +#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848) +#define RM_RSTCTRL_DSP PRCM_REG32(0x850) +#define RM_RSTST_DSP PRCM_REG32(0x858) +#define PM_WKEN_DSP PRCM_REG32(0x8A0) +#define PM_WKDEP_DSP PRCM_REG32(0x8C8) +#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0) +#define PM_PWSTST_DSP PRCM_REG32(0x8E4) +#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0) +#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4) + +/* IVA */ +#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8) +#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC) + +/* Modem on 2430 */ +#define CM_FCLKEN_MDM PRCM_REG32(0xC00) +#define CM_ICLKEN_MDM PRCM_REG32(0xC10) +#define CM_IDLEST_MDM PRCM_REG32(0xC20) +#define CM_CLKSEL_MDM PRCM_REG32(0xC40) + +/* FIXME: Move to header for 2430 */ +#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000) +#define DISP_REG32(offset) __REG32(DISP_BASE + (offset)) + +#define OMAP24XX_GPMC_BASE (L3_24XX_BASE + 0xa000) +#define GPMC_BASE (OMAP24XX_GPMC_BASE) +#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset)) + +#define GPT1_BASE (OMAP24XX_GPT1) +#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset)) + +/* Misc sysconfig */ +#define DISPC_SYSCONFIG DISP_REG32(0x410) +#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000) +#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10) +#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10) + +//#define DSP_MMU_SYSCONFIG 0x5A000010 +#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10) +//#define IVA_MMU_SYSCONFIG 0x5D000010 +//#define DSP_DMA_SYSCONFIG 0x00FCC02C +#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C) +#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C) +#define GPMC_SYSCONFIG GPMC_REG32(0x010) +#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010) +#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054) +#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054) +#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054) +//#define IVA_SYSCONFIG 0x5C060010 +#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10) +#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10) +#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010) +//#define VLYNQ_SYSCONFIG 0x67FFFE10 + +/* rkw - good cannidates for PM_ to start what nm was trying */ +#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) +#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) +#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) +#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) +#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) +#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) +#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) +#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) +#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) +#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) +#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000) + +#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010) +#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10) +#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10) +#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10) +#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10) +#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10) +#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10) +#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10) +#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10) +#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10) +#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10) +#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10) + +#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1))) + +#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10)) +#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10)) +#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10)) +#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10)) + +/* GP TIMER 1 */ +#define GPTIMER1_TISTAT GPT1_REG32(0x014) +#define GPTIMER1_TISR GPT1_REG32(0x018) +#define GPTIMER1_TIER GPT1_REG32(0x01C) +#define GPTIMER1_TWER GPT1_REG32(0x020) +#define GPTIMER1_TCLR GPT1_REG32(0x024) +#define GPTIMER1_TCRR GPT1_REG32(0x028) +#define GPTIMER1_TLDR GPT1_REG32(0x02C) +#define GPTIMER1_TTGR GPT1_REG32(0x030) +#define GPTIMER1_TWPS GPT1_REG32(0x034) +#define GPTIMER1_TMAR GPT1_REG32(0x038) +#define GPTIMER1_TCAR1 GPT1_REG32(0x03C) +#define GPTIMER1_TSICR GPT1_REG32(0x040) +#define GPTIMER1_TCAR2 GPT1_REG32(0x044) + +/* rkw -- base fix up please... */ +#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018) + +/* SDRC */ +#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060) +#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064) +#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068) +#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C) +#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070) +#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084) + +/* GPIO 1 */ +#define GPIO1_BASE GPIOX_BASE(1) +#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset)) +#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C) +#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018) +#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C) +#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028) +#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020) +#define GPIO1_RISINGDETECT GPIO1_REG32(0x048) +#define GPIO1_DATAIN GPIO1_REG32(0x038) +#define GPIO1_OE GPIO1_REG32(0x034) +#define GPIO1_DATAOUT GPIO1_REG32(0x03C) + +/* GPIO2 */ +#define GPIO2_BASE GPIOX_BASE(2) +#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset)) +#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C) +#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018) +#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C) +#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028) +#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020) +#define GPIO2_RISINGDETECT GPIO2_REG32(0x048) +#define GPIO2_DATAIN GPIO2_REG32(0x038) +#define GPIO2_OE GPIO2_REG32(0x034) +#define GPIO2_DATAOUT GPIO2_REG32(0x03C) + +/* GPIO 3 */ +#define GPIO3_BASE GPIOX_BASE(3) +#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset)) +#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C) +#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018) +#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C) +#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028) +#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020) +#define GPIO3_RISINGDETECT GPIO3_REG32(0x048) +#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C) +#define GPIO3_DATAIN GPIO3_REG32(0x038) +#define GPIO3_OE GPIO3_REG32(0x034) +#define GPIO3_DATAOUT GPIO3_REG32(0x03C) +#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050) +#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054) + +/* GPIO 4 */ +#define GPIO4_BASE GPIOX_BASE(4) +#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset)) +#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C) +#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018) +#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C) +#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028) +#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020) +#define GPIO4_RISINGDETECT GPIO4_REG32(0x048) +#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C) +#define GPIO4_DATAIN GPIO4_REG32(0x038) +#define GPIO4_OE GPIO4_REG32(0x034) +#define GPIO4_DATAOUT GPIO4_REG32(0x03C) +#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050) +#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054) + + +/* IO CONFIG */ +#define CONTROL_BASE (OMAP24XX_CTRL_BASE) +#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset)) + +#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104) +#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134) +#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8) +#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C) +#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090) +#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8) +#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) +#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0) +#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC) + +/* CONTROL */ +#define CONTROL_DEVCONF CONTROL_REG32(0x274) + +/* INTERRUPT CONTROLLER */ +#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000) +#define INTC_REG32(offset) __REG32(INTC_BASE + (offset)) + +#define INTC1_U_BASE INTC_REG32(0x000) +#define INTC_MIR0 INTC_REG32(0x084) +#define INTC_MIR_SET0 INTC_REG32(0x08C) +#define INTC_MIR_CLEAR0 INTC_REG32(0x088) +#define INTC_ISR_CLEAR0 INTC_REG32(0x094) +#define INTC_MIR1 INTC_REG32(0x0A4) +#define INTC_MIR_SET1 INTC_REG32(0x0AC) +#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8) +#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4) +#define INTC_MIR2 INTC_REG32(0x0C4) +#define INTC_MIR_SET2 INTC_REG32(0x0CC) +#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8) +#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4) +#define INTC_SIR_IRQ INTC_REG32(0x040) +#define INTC_CONTROL INTC_REG32(0x048) +#define INTC_ILR11 INTC_REG32(0x12C) +#define INTC_ILR32 INTC_REG32(0x180) +#define INTC_ILR37 INTC_REG32(0x194) +#define INTC_SYSCONFIG INTC_REG32(0x010) + +/* RAM FIREWALL */ +#define RAMFW_BASE (0x68005000) +#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset)) + +#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048) +#define RAMFW_READPERM0 RAMFW_REG32(0x050) +#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058) + +/* GPMC CS1 FPGA ON USER INTERFACE MODULE */ +//#define DEBUG_BOARD_LED_REGISTER 0x04000014 + +/* GPMC CS0 */ +#define GPMC_CONFIG1_0 GPMC_REG32(0x060) +#define GPMC_CONFIG2_0 GPMC_REG32(0x064) +#define GPMC_CONFIG3_0 GPMC_REG32(0x068) +#define GPMC_CONFIG4_0 GPMC_REG32(0x06C) +#define GPMC_CONFIG5_0 GPMC_REG32(0x070) +#define GPMC_CONFIG6_0 GPMC_REG32(0x074) +#define GPMC_CONFIG7_0 GPMC_REG32(0x078) + +/* GPMC CS1 */ +#define GPMC_CONFIG1_1 GPMC_REG32(0x090) +#define GPMC_CONFIG2_1 GPMC_REG32(0x094) +#define GPMC_CONFIG3_1 GPMC_REG32(0x098) +#define GPMC_CONFIG4_1 GPMC_REG32(0x09C) +#define GPMC_CONFIG5_1 GPMC_REG32(0x0a0) +#define GPMC_CONFIG6_1 GPMC_REG32(0x0a4) +#define GPMC_CONFIG7_1 GPMC_REG32(0x0a8) + +/* DSS */ +#define DSS_CONTROL DISP_REG32(0x040) +#define DISPC_CONTROL DISP_REG32(0x440) +#define DISPC_SYSSTATUS DISP_REG32(0x414) +#define DISPC_IRQSTATUS DISP_REG32(0x418) +#define DISPC_IRQENABLE DISP_REG32(0x41C) +#define DISPC_CONFIG DISP_REG32(0x444) +#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C) +#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450) +#define DISPC_TRANS_COLOR0 DISP_REG32(0x454) +#define DISPC_TRANS_COLOR1 DISP_REG32(0x458) +#define DISPC_LINE_NUMBER DISP_REG32(0x460) +#define DISPC_TIMING_H DISP_REG32(0x464) +#define DISPC_TIMING_V DISP_REG32(0x468) +#define DISPC_POL_FREQ DISP_REG32(0x46C) +#define DISPC_DIVISOR DISP_REG32(0x470) +#define DISPC_SIZE_DIG DISP_REG32(0x478) +#define DISPC_SIZE_LCD DISP_REG32(0x47C) +#define DISPC_GFX_BA0 DISP_REG32(0x480) +#define DISPC_GFX_BA1 DISP_REG32(0x484) +#define DISPC_GFX_POSITION DISP_REG32(0x488) +#define DISPC_GFX_SIZE DISP_REG32(0x48C) +#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0) +#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4) +#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC) +#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0) +#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4) +#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8) +#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4) +#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8) +#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC) + +/* Wake up define for board */ +#define GPIO97 (1 << 1) +#define GPIO88 (1 << 24) + +#endif /* __ASSEMBLER__ */ + +#endif + + + + + diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h new file mode 100644 index 0000000..e72ccbf --- /dev/null +++ b/include/asm-arm/arch-omap/sram.h @@ -0,0 +1,38 @@ +/* + * linux/include/asm-arm/arch-omap/sram.h + * + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_SRAM_H +#define __ARCH_ARM_OMAP_SRAM_H + +extern void * omap_sram_push(void * start, unsigned long size); +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + + +/* Do not use these */ +extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long sram_reprogram_clock_sz; + +extern void sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long sram_ddr_init_sz; + +extern u32 sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); +extern unsigned long sram_set_prcm_sz; + +extern void sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); +extern unsigned long sram_reprogram_sdrc_sz; + +#endif diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h index ff37bc2..b43cdd2 100644 --- a/include/asm-arm/arch-omap/system.h +++ b/include/asm-arm/arch-omap/system.h @@ -6,18 +6,21 @@ #define __ASM_ARCH_SYSTEM_H #include <linux/config.h> #include <asm/mach-types.h> +#include <asm/hardware/clock.h> #include <asm/arch/hardware.h> -#include <asm/mach-types.h> +#include <asm/arch/prcm.h> + +#ifndef CONFIG_MACH_VOICEBLUE +#define voiceblue_reset() do {} while (0) +#endif static inline void arch_idle(void) { cpu_do_idle(); } -static inline void arch_reset(char mode) +static inline void omap1_arch_reset(char mode) { - -#ifdef CONFIG_ARCH_OMAP16XX /* * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 * "Global Software Reset Affects Traffic Controller Frequency". @@ -27,13 +30,31 @@ static inline void arch_reset(char mode) DPLL_CTL); omap_writew(0x8, ARM_RSTCT1); } -#endif -#ifdef CONFIG_MACH_VOICEBLUE + if (machine_is_voiceblue()) voiceblue_reset(); else -#endif omap_writew(1, ARM_RSTCT1); } +static inline void omap2_arch_reset(char mode) +{ + u32 rate; + struct clk *vclk, *sclk; + + vclk = clk_get(NULL, "virt_prcm_set"); + sclk = clk_get(NULL, "sys_ck"); + rate = clk_get_rate(sclk); + clk_set_rate(vclk, rate); /* go to bypass for OMAP limitation */ + RM_RSTCTRL_WKUP |= 2; +} + +static inline void arch_reset(char mode) +{ + if (!cpu_is_omap24xx()) + omap1_arch_reset(mode); + else + omap2_arch_reset(mode); +} + #endif diff --git a/include/asm-arm/arch-omap/timex.h b/include/asm-arm/arch-omap/timex.h index b61ddb4..21f2e36 100644 --- a/include/asm-arm/arch-omap/timex.h +++ b/include/asm-arm/arch-omap/timex.h @@ -28,6 +28,14 @@ #if !defined(__ASM_ARCH_OMAP_TIMEX_H) #define __ASM_ARCH_OMAP_TIMEX_H +/* + * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer, + * and that's why the CLOCK_TICK_RATE is not 32768. + */ +#ifdef CONFIG_OMAP_32K_TIMER +#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ) +#else #define CLOCK_TICK_RATE (HZ * 100000UL) +#endif #endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h index 3545c86..c718264 100644 --- a/include/asm-arm/arch-omap/uncompress.h +++ b/include/asm-arm/arch-omap/uncompress.h @@ -36,10 +36,14 @@ putstr(const char *s) volatile u8 * uart = 0; int shift = 2; +#ifdef CONFIG_MACH_OMAP_PALMTE + return; +#endif + #ifdef CONFIG_ARCH_OMAP #ifdef CONFIG_OMAP_LL_DEBUG_UART3 uart = (volatile u8 *)(OMAP_UART3_BASE); -#elif CONFIG_OMAP_LL_DEBUG_UART2 +#elif defined(CONFIG_OMAP_LL_DEBUG_UART2) uart = (volatile u8 *)(OMAP_UART2_BASE); #else uart = (volatile u8 *)(OMAP_UART1_BASE); |