diff options
Diffstat (limited to 'include/drm/drm_crtc.h')
| -rw-r--r-- | include/drm/drm_crtc.h | 327 |
1 files changed, 289 insertions, 38 deletions
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index c40070a..b863298 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -42,6 +42,7 @@ struct drm_object_properties; struct drm_file; struct drm_clip_rect; struct device_node; +struct fence; #define DRM_MODE_OBJECT_CRTC 0xcccccccc #define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0 @@ -136,14 +137,22 @@ struct drm_display_info { u8 cea_rev; }; +/* data corresponds to displayid vend/prod/serial */ +struct drm_tile_group { + struct kref refcount; + struct drm_device *dev; + int id; + u8 group_data[8]; +}; + struct drm_framebuffer_funcs { /* note: use drm_framebuffer_remove() */ void (*destroy)(struct drm_framebuffer *framebuffer); int (*create_handle)(struct drm_framebuffer *fb, struct drm_file *file_priv, unsigned int *handle); - /** - * Optinal callback for the dirty fb ioctl. + /* + * Optional callback for the dirty fb ioctl. * * Userspace can notify the driver via this callback * that a area of the framebuffer has changed and should @@ -196,7 +205,7 @@ struct drm_framebuffer { struct drm_property_blob { struct drm_mode_object base; struct list_head head; - unsigned int length; + size_t length; unsigned char data[]; }; @@ -215,7 +224,7 @@ struct drm_property { uint64_t *values; struct drm_device *dev; - struct list_head enum_blob_list; + struct list_head enum_list; }; struct drm_crtc; @@ -224,19 +233,65 @@ struct drm_encoder; struct drm_pending_vblank_event; struct drm_plane; struct drm_bridge; +struct drm_atomic_state; /** - * drm_crtc_funcs - control CRTCs for a given device + * struct drm_crtc_state - mutable CRTC state + * @enable: whether the CRTC should be enabled, gates all other state + * @mode_changed: for use by helpers and drivers when computing state updates + * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes + * @last_vblank_count: for helpers and drivers to capture the vblank of the + * update to ensure framebuffer cleanup isn't done too early + * @planes_changed: for use by helpers and drivers when computing state updates + * @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings + * @mode: current mode timings + * @event: optional pointer to a DRM event to signal upon completion of the + * state update + * @state: backpointer to global drm_atomic_state + */ +struct drm_crtc_state { + bool enable; + + /* computed state bits used by helpers and drivers */ + bool planes_changed : 1; + bool mode_changed : 1; + + /* attached planes bitmask: + * WARNING: transitional helpers do not maintain plane_mask so + * drivers not converted over to atomic helpers should not rely + * on plane_mask being accurate! + */ + u32 plane_mask; + + /* last_vblank_count: for vblank waits before cleanup */ + u32 last_vblank_count; + + /* adjusted_mode: for use by helpers and drivers */ + struct drm_display_mode adjusted_mode; + + struct drm_display_mode mode; + + struct drm_pending_vblank_event *event; + + struct drm_atomic_state *state; +}; + +/** + * struct drm_crtc_funcs - control CRTCs for a given device * @save: save CRTC state * @restore: restore CRTC state * @reset: reset CRTC after state has been invalidated (e.g. resume) * @cursor_set: setup the cursor + * @cursor_set2: setup the cursor with hotspot, superseeds @cursor_set if set * @cursor_move: move the cursor * @gamma_set: specify color ramp for CRTC * @destroy: deinit and free object * @set_property: called when a property is changed * @set_config: apply a new CRTC configuration * @page_flip: initiate a page flip + * @atomic_duplicate_state: duplicate the atomic state for this CRTC + * @atomic_destroy_state: destroy an atomic state for this CRTC + * @atomic_set_property: set a property on an atomic state for this CRTC * * The drm_crtc_funcs structure is the central CRTC management structure * in the DRM. Each CRTC controls one or more connectors (note that the name @@ -287,16 +342,28 @@ struct drm_crtc_funcs { int (*set_property)(struct drm_crtc *crtc, struct drm_property *property, uint64_t val); + + /* atomic update handling */ + struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc); + void (*atomic_destroy_state)(struct drm_crtc *crtc, + struct drm_crtc_state *state); + int (*atomic_set_property)(struct drm_crtc *crtc, + struct drm_crtc_state *state, + struct drm_property *property, + uint64_t val); }; /** - * drm_crtc - central CRTC control structure + * struct drm_crtc - central CRTC control structure * @dev: parent DRM device + * @port: OF node used by drm_of_find_possible_crtcs() * @head: list management * @mutex: per-CRTC locking * @base: base KMS object for ID tracking etc. * @primary: primary plane for this CRTC * @cursor: cursor plane for this CRTC + * @cursor_x: current x position of the cursor, used for universal cursor planes + * @cursor_y: current y position of the cursor, used for universal cursor planes * @enabled: is this CRTC enabled? * @mode: current mode timings * @hwmode: mode timings as programmed to hw regs @@ -309,10 +376,13 @@ struct drm_crtc_funcs { * @gamma_size: size of gamma ramp * @gamma_store: gamma ramp values * @framedur_ns: precise frame timing - * @framedur_ns: precise line timing + * @linedur_ns: precise line timing * @pixeldur_ns: precise pixel timing * @helper_private: mid-layer private data * @properties: property tracking for this CRTC + * @state: current atomic state for this CRTC + * @acquire_ctx: per-CRTC implicit acquire context used by atomic drivers for + * legacy ioctls * * Each CRTC may have one or more connectors associated with it. This structure * allows the CRTC to be controlled. @@ -322,7 +392,7 @@ struct drm_crtc { struct device_node *port; struct list_head head; - /** + /* * crtc mutex * * This provides a read lock for the overall crtc state (mode, dpms @@ -368,6 +438,8 @@ struct drm_crtc { struct drm_object_properties properties; + struct drm_crtc_state *state; + /* * For legacy crtc ioctls so that atomic drivers can get at the locking * acquire context. @@ -375,9 +447,22 @@ struct drm_crtc { struct drm_modeset_acquire_ctx *acquire_ctx; }; +/** + * struct drm_connector_state - mutable connector state + * @crtc: CRTC to connect connector to, NULL if disabled + * @best_encoder: can be used by helpers and drivers to select the encoder + * @state: backpointer to global drm_atomic_state + */ +struct drm_connector_state { + struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_connector() */ + + struct drm_encoder *best_encoder; + + struct drm_atomic_state *state; +}; /** - * drm_connector_funcs - control connectors on a given device + * struct drm_connector_funcs - control connectors on a given device * @dpms: set power state (see drm_crtc_funcs above) * @save: save connector state * @restore: restore connector state @@ -387,6 +472,9 @@ struct drm_crtc { * @set_property: property for this connector may need an update * @destroy: make object go away * @force: notify the driver that the connector is forced on + * @atomic_duplicate_state: duplicate the atomic state for this connector + * @atomic_destroy_state: destroy an atomic state for this connector + * @atomic_set_property: set a property on an atomic state for this connector * * Each CRTC may have one or more connectors attached to it. The functions * below allow the core DRM code to control connectors, enumerate available modes, @@ -411,10 +499,19 @@ struct drm_connector_funcs { uint64_t val); void (*destroy)(struct drm_connector *connector); void (*force)(struct drm_connector *connector); + + /* atomic update handling */ + struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); + void (*atomic_destroy_state)(struct drm_connector *connector, + struct drm_connector_state *state); + int (*atomic_set_property)(struct drm_connector *connector, + struct drm_connector_state *state, + struct drm_property *property, + uint64_t val); }; /** - * drm_encoder_funcs - encoder controls + * struct drm_encoder_funcs - encoder controls * @reset: reset state (e.g. at init or resume time) * @destroy: cleanup and free associated data * @@ -428,7 +525,7 @@ struct drm_encoder_funcs { #define DRM_CONNECTOR_MAX_ENCODER 3 /** - * drm_encoder - central DRM encoder structure + * struct drm_encoder - central DRM encoder structure * @dev: parent DRM device * @head: list management * @base: base KMS object @@ -472,7 +569,7 @@ struct drm_encoder { #define MAX_ELD_BYTES 128 /** - * drm_connector - central DRM connector control structure + * struct drm_connector - central DRM connector control structure * @dev: parent DRM device * @kdev: kernel device for sysfs attributes * @attr: sysfs attributes @@ -483,6 +580,7 @@ struct drm_encoder { * @connector_type_id: index into connector type enum * @interlace_allowed: can this connector handle interlaced modes? * @doublescan_allowed: can this connector handle doublescan? + * @stereo_allowed: can this connector handle stereo modes? * @modes: modes available on this connector (from fill_modes() + user) * @status: one of the drm_connector_status enums (connected, not, or unknown) * @probed_modes: list of modes derived directly from the display @@ -490,10 +588,13 @@ struct drm_encoder { * @funcs: connector control functions * @edid_blob_ptr: DRM property containing EDID if present * @properties: property tracking for this connector + * @path_blob_ptr: DRM blob property data for the DP MST path property * @polled: a %DRM_CONNECTOR_POLL_<foo> value for core driven polling * @dpms: current dpms state * @helper_private: mid-layer private data + * @cmdline_mode: mode line parsed from the kernel cmdline for this connector * @force: a %DRM_FORCE_<foo> state for forced mode sets + * @override_edid: has the EDID been overwritten through debugfs for testing? * @encoder_ids: valid encoders for this connector * @encoder: encoder driving this connector, if any * @eld: EDID-like data, if present @@ -503,6 +604,18 @@ struct drm_encoder { * @video_latency: video latency info from ELD, if found * @audio_latency: audio latency info from ELD, if found * @null_edid_counter: track sinks that give us all zeros for the EDID + * @bad_edid_counter: track sinks that give us an EDID with invalid checksum + * @debugfs_entry: debugfs directory for this connector + * @state: current atomic state for this connector + * @has_tile: is this connector connected to a tiled monitor + * @tile_group: tile group for the connected monitor + * @tile_is_single_monitor: whether the tile is one monitor housing + * @num_h_tile: number of horizontal tiles in the tile group + * @num_v_tile: number of vertical tiles in the tile group + * @tile_h_loc: horizontal location of this tile + * @tile_v_loc: vertical location of this tile + * @tile_h_size: horizontal size of this tile. + * @tile_v_size: vertical size of this tile. * * Each connector may be connected to one or more CRTCs, or may be clonable by * another connector if they can share a CRTC. Each connector also has a specific @@ -538,6 +651,8 @@ struct drm_connector { struct drm_property_blob *path_blob_ptr; + struct drm_property_blob *tile_blob_ptr; + uint8_t polled; /* DRM_CONNECTOR_POLL_* */ /* requested DPMS state */ @@ -563,14 +678,63 @@ struct drm_connector { unsigned bad_edid_counter; struct dentry *debugfs_entry; + + struct drm_connector_state *state; + + /* DisplayID bits */ + bool has_tile; + struct drm_tile_group *tile_group; + bool tile_is_single_monitor; + + uint8_t num_h_tile, num_v_tile; + uint8_t tile_h_loc, tile_v_loc; + uint16_t tile_h_size, tile_v_size; +}; + +/** + * struct drm_plane_state - mutable plane state + * @crtc: currently bound CRTC, NULL if disabled + * @fb: currently bound framebuffer + * @fence: optional fence to wait for before scanning out @fb + * @crtc_x: left position of visible portion of plane on crtc + * @crtc_y: upper position of visible portion of plane on crtc + * @crtc_w: width of visible portion of plane on crtc + * @crtc_h: height of visible portion of plane on crtc + * @src_x: left position of visible portion of plane within + * plane (in 16.16) + * @src_y: upper position of visible portion of plane within + * plane (in 16.16) + * @src_w: width of visible portion of plane (in 16.16) + * @src_h: height of visible portion of plane (in 16.16) + * @state: backpointer to global drm_atomic_state + */ +struct drm_plane_state { + struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_plane() */ + struct drm_framebuffer *fb; /* do not write directly, use drm_atomic_set_fb_for_plane() */ + struct fence *fence; + + /* Signed dest location allows it to be partially off screen */ + int32_t crtc_x, crtc_y; + uint32_t crtc_w, crtc_h; + + /* Source values are 16.16 fixed point */ + uint32_t src_x, src_y; + uint32_t src_h, src_w; + + struct drm_atomic_state *state; }; + /** - * drm_plane_funcs - driver plane control functions + * struct drm_plane_funcs - driver plane control functions * @update_plane: update the plane configuration * @disable_plane: shut down the plane * @destroy: clean up plane resources + * @reset: reset plane after state has been invalidated (e.g. resume) * @set_property: called when a property is changed + * @atomic_duplicate_state: duplicate the atomic state for this plane + * @atomic_destroy_state: destroy an atomic state for this plane + * @atomic_set_property: set a property on an atomic state for this plane */ struct drm_plane_funcs { int (*update_plane)(struct drm_plane *plane, @@ -585,6 +749,15 @@ struct drm_plane_funcs { int (*set_property)(struct drm_plane *plane, struct drm_property *property, uint64_t val); + + /* atomic update handling */ + struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane); + void (*atomic_destroy_state)(struct drm_plane *plane, + struct drm_plane_state *state); + int (*atomic_set_property)(struct drm_plane *plane, + struct drm_plane_state *state, + struct drm_property *property, + uint64_t val); }; enum drm_plane_type { @@ -594,7 +767,7 @@ enum drm_plane_type { }; /** - * drm_plane - central DRM plane control structure + * struct drm_plane - central DRM plane control structure * @dev: DRM device this plane belongs to * @head: for list management * @base: base mode object @@ -603,14 +776,19 @@ enum drm_plane_type { * @format_count: number of formats supported * @crtc: currently bound CRTC * @fb: currently bound fb + * @old_fb: Temporary tracking of the old fb while a modeset is ongoing. Used by + * drm_mode_set_config_internal() to implement correct refcounting. * @funcs: helper functions * @properties: property tracking for this plane * @type: type of plane (overlay, primary, cursor) + * @state: current atomic state for this plane */ struct drm_plane { struct drm_device *dev; struct list_head head; + struct drm_modeset_lock mutex; + struct drm_mode_object base; uint32_t possible_crtcs; @@ -620,8 +798,6 @@ struct drm_plane { struct drm_crtc *crtc; struct drm_framebuffer *fb; - /* Temporary tracking of the old fb while a modeset is ongoing. Used - * by drm_mode_set_config_internal to implement correct refcounting. */ struct drm_framebuffer *old_fb; const struct drm_plane_funcs *funcs; @@ -629,10 +805,14 @@ struct drm_plane { struct drm_object_properties properties; enum drm_plane_type type; + + void *helper_private; + + struct drm_plane_state *state; }; /** - * drm_bridge_funcs - drm_bridge control functions + * struct drm_bridge_funcs - drm_bridge control functions * @mode_fixup: Try to fixup (or reject entirely) proposed mode for this bridge * @disable: Called right before encoder prepare, disables the bridge * @post_disable: Called right after encoder prepare, for lockstepped disable @@ -656,7 +836,7 @@ struct drm_bridge_funcs { }; /** - * drm_bridge - central DRM bridge control structure + * struct drm_bridge - central DRM bridge control structure * @dev: DRM device this bridge belongs to * @head: list management * @base: base mode object @@ -674,8 +854,35 @@ struct drm_bridge { }; /** - * drm_mode_set - new values for a CRTC config change - * @head: list management + * struct struct drm_atomic_state - the global state object for atomic updates + * @dev: parent DRM device + * @flags: state flags like async update + * @planes: pointer to array of plane pointers + * @plane_states: pointer to array of plane states pointers + * @crtcs: pointer to array of CRTC pointers + * @crtc_states: pointer to array of CRTC states pointers + * @num_connector: size of the @connectors and @connector_states arrays + * @connectors: pointer to array of connector pointers + * @connector_states: pointer to array of connector states pointers + * @acquire_ctx: acquire context for this atomic modeset state update + */ +struct drm_atomic_state { + struct drm_device *dev; + uint32_t flags; + struct drm_plane **planes; + struct drm_plane_state **plane_states; + struct drm_crtc **crtcs; + struct drm_crtc_state **crtc_states; + int num_connector; + struct drm_connector **connectors; + struct drm_connector_state **connector_states; + + struct drm_modeset_acquire_ctx *acquire_ctx; +}; + + +/** + * struct drm_mode_set - new values for a CRTC config change * @fb: framebuffer to use for new config * @crtc: CRTC whose configuration we're about to change * @mode: mode timings to use @@ -705,6 +912,9 @@ struct drm_mode_set { * struct drm_mode_config_funcs - basic driver provided mode setting functions * @fb_create: create a new framebuffer object * @output_poll_changed: function to handle output configuration changes + * @atomic_check: check whether a give atomic state update is possible + * @atomic_commit: commit an atomic state update previously verified with + * atomic_check() * * Some global (i.e. not per-CRTC, connector, etc) mode setting functions that * involve drivers. @@ -714,13 +924,20 @@ struct drm_mode_config_funcs { struct drm_file *file_priv, struct drm_mode_fb_cmd2 *mode_cmd); void (*output_poll_changed)(struct drm_device *dev); + + int (*atomic_check)(struct drm_device *dev, + struct drm_atomic_state *a); + int (*atomic_commit)(struct drm_device *dev, + struct drm_atomic_state *a, + bool async); }; /** - * drm_mode_group - group of mode setting resources for potential sub-grouping + * struct drm_mode_group - group of mode setting resources for potential sub-grouping * @num_crtcs: CRTC count * @num_encoders: encoder count * @num_connectors: connector count + * @num_bridges: bridge count * @id_list: list of KMS object IDs in this group * * Currently this simply tracks the global mode setting state. But in the @@ -740,10 +957,14 @@ struct drm_mode_group { }; /** - * drm_mode_config - Mode configuration control structure + * struct drm_mode_config - Mode configuration control structure * @mutex: mutex protecting KMS related lists and structures + * @connection_mutex: ww mutex protecting connector state and routing + * @acquire_ctx: global implicit acquire context used by atomic drivers for + * legacy ioctls * @idr_mutex: mutex for KMS ID allocation and management * @crtc_idr: main KMS ID tracking object + * @fb_lock: mutex to protect fb state and lists * @num_fb: number of fbs available * @fb_list: list of framebuffers available * @num_connector: number of connectors on this device @@ -752,17 +973,28 @@ struct drm_mode_group { * @bridge_list: list of bridge objects * @num_encoder: number of encoders on this device * @encoder_list: list of encoder objects + * @num_overlay_plane: number of overlay planes on this device + * @num_total_plane: number of universal (i.e. with primary/curso) planes on this device + * @plane_list: list of plane objects * @num_crtc: number of CRTCs on this device * @crtc_list: list of CRTC objects + * @property_list: list of property objects * @min_width: minimum pixel width on this device * @min_height: minimum pixel height on this device * @max_width: maximum pixel width on this device * @max_height: maximum pixel height on this device * @funcs: core driver provided mode setting functions * @fb_base: base address of the framebuffer - * @poll_enabled: track polling status for this device + * @poll_enabled: track polling support for this device + * @poll_running: track polling status for this device * @output_poll_work: delayed work for polling in process context + * @property_blob_list: list of all the blob property objects * @*_property: core property tracking + * @preferred_depth: preferred RBG pixel depth, used by fb helpers + * @prefer_shadow: hint to userspace to prefer shadow-fb rendering + * @async_page_flip: does this device support async flips on the primary plane? + * @cursor_width: hint to userspace for max cursor width + * @cursor_height: hint to userspace for max cursor height * * Core mode resource tracking structure. All CRTC, encoders, and connectors * enumerated by the driver are added here, as are global properties. Some @@ -774,16 +1006,10 @@ struct drm_mode_config { struct drm_modeset_acquire_ctx *acquire_ctx; /* for legacy _lock_all() / _unlock_all() */ struct mutex idr_mutex; /* for IDR management */ struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ + struct idr tile_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ /* this is limited to one for now */ - - /** - * fb_lock - mutex to protect fb state - * - * Besides the global fb list his also protects the fbs list in the - * file_priv - */ - struct mutex fb_lock; + struct mutex fb_lock; /* proctects global and per-file fb lists */ int num_fb; struct list_head fb_list; @@ -824,6 +1050,7 @@ struct drm_mode_config { struct drm_property *edid_property; struct drm_property *dpms_property; struct drm_property *path_property; + struct drm_property *tile_property; struct drm_property *plane_type_property; struct drm_property *rotation_property; @@ -851,6 +1078,10 @@ struct drm_mode_config { struct drm_property *aspect_ratio_property; struct drm_property *dirty_info_property; + /* properties for virtual machine layout */ + struct drm_property *suggested_x_property; + struct drm_property *suggested_y_property; + /* dumb ioctl parameters */ uint32_t preferred_depth, prefer_shadow; @@ -861,6 +1092,19 @@ struct drm_mode_config { uint32_t cursor_width, cursor_height; }; +/** + * drm_for_each_plane_mask - iterate over planes specified by bitmask + * @plane: the loop cursor + * @dev: the DRM device + * @plane_mask: bitmask of plane indices + * + * Iterate over all planes specified by bitmask. + */ +#define drm_for_each_plane_mask(plane, dev, plane_mask) \ + list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \ + if ((plane_mask) & (1 << drm_plane_index(plane))) + + #define obj_to_crtc(x) container_of(x, struct drm_crtc, base) #define obj_to_connector(x) container_of(x, struct drm_connector, base) #define obj_to_encoder(x) container_of(x, struct drm_encoder, base) @@ -880,9 +1124,6 @@ extern int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs); -extern int drm_crtc_init(struct drm_device *dev, - struct drm_crtc *crtc, - const struct drm_crtc_funcs *funcs); extern void drm_crtc_cleanup(struct drm_crtc *crtc); extern unsigned int drm_crtc_index(struct drm_crtc *crtc); @@ -978,9 +1219,10 @@ extern void drm_mode_config_reset(struct drm_device *dev); extern void drm_mode_config_cleanup(struct drm_device *dev); extern int drm_mode_connector_set_path_property(struct drm_connector *connector, - char *path); + const char *path); +int drm_mode_connector_set_tile_property(struct drm_connector *connector); extern int drm_mode_connector_update_edid_property(struct drm_connector *connector, - struct edid *edid); + const struct edid *edid); static inline bool drm_property_type_is(struct drm_property *property, uint32_t type) @@ -1041,11 +1283,13 @@ extern void drm_property_destroy(struct drm_device *dev, struct drm_property *pr extern int drm_property_add_enum(struct drm_property *property, int index, uint64_t value, const char *name); extern int drm_mode_create_dvi_i_properties(struct drm_device *dev); -extern int drm_mode_create_tv_properties(struct drm_device *dev, int num_formats, - char *formats[]); +extern int drm_mode_create_tv_properties(struct drm_device *dev, + unsigned int num_modes, + char *modes[]); extern int drm_mode_create_scaling_mode_property(struct drm_device *dev); extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev); extern int drm_mode_create_dirty_info_property(struct drm_device *dev); +extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev); extern int drm_mode_connector_attach_encoder(struct drm_connector *connector, struct drm_encoder *encoder); @@ -1113,6 +1357,13 @@ extern void drm_set_preferred_mode(struct drm_connector *connector, extern int drm_edid_header_is_valid(const u8 *raw_edid); extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid); extern bool drm_edid_is_valid(struct edid *edid); + +extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, + char topology[8]); +extern struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, + char topology[8]); +extern void drm_mode_put_tile_group(struct drm_device *dev, + struct drm_tile_group *tg); struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev, int hsize, int vsize, int fresh, bool rb); |