diff options
Diffstat (limited to 'include/net')
-rw-r--r-- | include/net/cfg80211.h | 19 | ||||
-rw-r--r-- | include/net/mac80211.h | 39 |
2 files changed, 56 insertions, 2 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 81d7250..8a1aec5 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3594,6 +3594,25 @@ void cfg80211_ch_switch_notify(struct net_device *dev, int freq, enum nl80211_channel_type type); /* + * cfg80211_tdls_oper_request - request userspace to perform TDLS operation + * @dev: the device on which the operation is requested + * @peer: the MAC address of the peer device + * @oper: the requested TDLS operation (NL80211_TDLS_SETUP or + * NL80211_TDLS_TEARDOWN) + * @reason_code: the reason code for teardown request + * @gfp: allocation flags + * + * This function is used to request userspace to perform TDLS operation that + * requires knowledge of keys, i.e., link setup or teardown when the AP + * connection uses encryption. This is optional mechanism for the driver to use + * if it can automatically determine when a TDLS link could be useful (e.g., + * based on traffic and signal strength for a peer). + */ +void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer, + enum nl80211_tdls_operation oper, + u16 reason_code, gfp_t gfp); + +/* * cfg80211_calculate_bitrate - calculate actual bitrate (in 100Kbps units) * @rate: given rate_info to calculate bitrate from * diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a789dd1..e1293c7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -711,10 +711,13 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * the frame. * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on * the frame. - * @RX_FLAG_MACTIME_MPDU: The timestamp passed in the RX status (@mactime + * @RX_FLAG_MACTIME_START: The timestamp passed in the RX status (@mactime * field) is valid and contains the time the first symbol of the MPDU * was received. This is useful in monitor mode and for proper IBSS * merging. + * @RX_FLAG_MACTIME_END: The timestamp passed in the RX status (@mactime + * field) is valid and contains the time the last symbol of the MPDU + * (including FCS) was received. * @RX_FLAG_SHORTPRE: Short preamble was used for this frame * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index * @RX_FLAG_40MHZ: HT40 (40 MHz) was used @@ -745,7 +748,7 @@ enum mac80211_rx_flags { RX_FLAG_IV_STRIPPED = BIT(4), RX_FLAG_FAILED_FCS_CRC = BIT(5), RX_FLAG_FAILED_PLCP_CRC = BIT(6), - RX_FLAG_MACTIME_MPDU = BIT(7), + RX_FLAG_MACTIME_START = BIT(7), RX_FLAG_SHORTPRE = BIT(8), RX_FLAG_HT = BIT(9), RX_FLAG_40MHZ = BIT(10), @@ -759,6 +762,7 @@ enum mac80211_rx_flags { RX_FLAG_AMPDU_IS_LAST = BIT(18), RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(19), RX_FLAG_AMPDU_DELIM_CRC_KNOWN = BIT(20), + RX_FLAG_MACTIME_END = BIT(21), }; /** @@ -785,12 +789,21 @@ enum mac80211_rx_flags { * @ampdu_reference: A-MPDU reference number, must be a different value for * each A-MPDU but the same for each subframe within one A-MPDU * @ampdu_delimiter_crc: A-MPDU delimiter CRC + * @vendor_radiotap_bitmap: radiotap vendor namespace presence bitmap + * @vendor_radiotap_len: radiotap vendor namespace length + * @vendor_radiotap_align: radiotap vendor namespace alignment. Note + * that the actual data must be at the start of the SKB data + * already. + * @vendor_radiotap_oui: radiotap vendor namespace OUI + * @vendor_radiotap_subns: radiotap vendor sub namespace */ struct ieee80211_rx_status { u64 mactime; u32 device_timestamp; u32 ampdu_reference; u32 flag; + u32 vendor_radiotap_bitmap; + u16 vendor_radiotap_len; u16 freq; u8 rate_idx; u8 rx_flags; @@ -798,6 +811,9 @@ struct ieee80211_rx_status { u8 antenna; s8 signal; u8 ampdu_delimiter_crc; + u8 vendor_radiotap_align; + u8 vendor_radiotap_oui[3]; + u8 vendor_radiotap_subns; }; /** @@ -2192,6 +2208,14 @@ enum ieee80211_rate_control_changed { * @sta_remove: Notifies low level driver about removal of an associated * station, AP, IBSS/WDS/mesh peer etc. This callback can sleep. * + * @sta_add_debugfs: Drivers can use this callback to add debugfs files + * when a station is added to mac80211's station list. This callback + * and @sta_remove_debugfs should be within a CONFIG_MAC80211_DEBUGFS + * conditional. This callback can sleep. + * + * @sta_remove_debugfs: Remove the debugfs files which were added using + * @sta_add_debugfs. This callback can sleep. + * * @sta_notify: Notifies low level driver about power state transition of an * associated station, AP, IBSS/WDS/mesh peer etc. For a VIF operating * in AP mode, this callback will not be called when the flag @@ -2473,6 +2497,16 @@ struct ieee80211_ops { struct ieee80211_sta *sta); int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta); +#ifdef CONFIG_MAC80211_DEBUGFS + void (*sta_add_debugfs)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct dentry *dir); + void (*sta_remove_debugfs)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct dentry *dir); +#endif void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -2514,6 +2548,7 @@ struct ieee80211_ops { int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant); int (*remain_on_channel)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, struct ieee80211_channel *chan, enum nl80211_channel_type channel_type, int duration); |