summaryrefslogtreecommitdiff
path: root/include/net
diff options
context:
space:
mode:
Diffstat (limited to 'include/net')
-rw-r--r--include/net/cfg80211.h19
-rw-r--r--include/net/mac80211.h39
2 files changed, 56 insertions, 2 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 81d7250..8a1aec5 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -3594,6 +3594,25 @@ void cfg80211_ch_switch_notify(struct net_device *dev, int freq,
enum nl80211_channel_type type);
/*
+ * cfg80211_tdls_oper_request - request userspace to perform TDLS operation
+ * @dev: the device on which the operation is requested
+ * @peer: the MAC address of the peer device
+ * @oper: the requested TDLS operation (NL80211_TDLS_SETUP or
+ * NL80211_TDLS_TEARDOWN)
+ * @reason_code: the reason code for teardown request
+ * @gfp: allocation flags
+ *
+ * This function is used to request userspace to perform TDLS operation that
+ * requires knowledge of keys, i.e., link setup or teardown when the AP
+ * connection uses encryption. This is optional mechanism for the driver to use
+ * if it can automatically determine when a TDLS link could be useful (e.g.,
+ * based on traffic and signal strength for a peer).
+ */
+void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer,
+ enum nl80211_tdls_operation oper,
+ u16 reason_code, gfp_t gfp);
+
+/*
* cfg80211_calculate_bitrate - calculate actual bitrate (in 100Kbps units)
* @rate: given rate_info to calculate bitrate from
*
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index a789dd1..e1293c7 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -711,10 +711,13 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* the frame.
* @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
* the frame.
- * @RX_FLAG_MACTIME_MPDU: The timestamp passed in the RX status (@mactime
+ * @RX_FLAG_MACTIME_START: The timestamp passed in the RX status (@mactime
* field) is valid and contains the time the first symbol of the MPDU
* was received. This is useful in monitor mode and for proper IBSS
* merging.
+ * @RX_FLAG_MACTIME_END: The timestamp passed in the RX status (@mactime
+ * field) is valid and contains the time the last symbol of the MPDU
+ * (including FCS) was received.
* @RX_FLAG_SHORTPRE: Short preamble was used for this frame
* @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
* @RX_FLAG_40MHZ: HT40 (40 MHz) was used
@@ -745,7 +748,7 @@ enum mac80211_rx_flags {
RX_FLAG_IV_STRIPPED = BIT(4),
RX_FLAG_FAILED_FCS_CRC = BIT(5),
RX_FLAG_FAILED_PLCP_CRC = BIT(6),
- RX_FLAG_MACTIME_MPDU = BIT(7),
+ RX_FLAG_MACTIME_START = BIT(7),
RX_FLAG_SHORTPRE = BIT(8),
RX_FLAG_HT = BIT(9),
RX_FLAG_40MHZ = BIT(10),
@@ -759,6 +762,7 @@ enum mac80211_rx_flags {
RX_FLAG_AMPDU_IS_LAST = BIT(18),
RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(19),
RX_FLAG_AMPDU_DELIM_CRC_KNOWN = BIT(20),
+ RX_FLAG_MACTIME_END = BIT(21),
};
/**
@@ -785,12 +789,21 @@ enum mac80211_rx_flags {
* @ampdu_reference: A-MPDU reference number, must be a different value for
* each A-MPDU but the same for each subframe within one A-MPDU
* @ampdu_delimiter_crc: A-MPDU delimiter CRC
+ * @vendor_radiotap_bitmap: radiotap vendor namespace presence bitmap
+ * @vendor_radiotap_len: radiotap vendor namespace length
+ * @vendor_radiotap_align: radiotap vendor namespace alignment. Note
+ * that the actual data must be at the start of the SKB data
+ * already.
+ * @vendor_radiotap_oui: radiotap vendor namespace OUI
+ * @vendor_radiotap_subns: radiotap vendor sub namespace
*/
struct ieee80211_rx_status {
u64 mactime;
u32 device_timestamp;
u32 ampdu_reference;
u32 flag;
+ u32 vendor_radiotap_bitmap;
+ u16 vendor_radiotap_len;
u16 freq;
u8 rate_idx;
u8 rx_flags;
@@ -798,6 +811,9 @@ struct ieee80211_rx_status {
u8 antenna;
s8 signal;
u8 ampdu_delimiter_crc;
+ u8 vendor_radiotap_align;
+ u8 vendor_radiotap_oui[3];
+ u8 vendor_radiotap_subns;
};
/**
@@ -2192,6 +2208,14 @@ enum ieee80211_rate_control_changed {
* @sta_remove: Notifies low level driver about removal of an associated
* station, AP, IBSS/WDS/mesh peer etc. This callback can sleep.
*
+ * @sta_add_debugfs: Drivers can use this callback to add debugfs files
+ * when a station is added to mac80211's station list. This callback
+ * and @sta_remove_debugfs should be within a CONFIG_MAC80211_DEBUGFS
+ * conditional. This callback can sleep.
+ *
+ * @sta_remove_debugfs: Remove the debugfs files which were added using
+ * @sta_add_debugfs. This callback can sleep.
+ *
* @sta_notify: Notifies low level driver about power state transition of an
* associated station, AP, IBSS/WDS/mesh peer etc. For a VIF operating
* in AP mode, this callback will not be called when the flag
@@ -2473,6 +2497,16 @@ struct ieee80211_ops {
struct ieee80211_sta *sta);
int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_sta *sta);
+#ifdef CONFIG_MAC80211_DEBUGFS
+ void (*sta_add_debugfs)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct dentry *dir);
+ void (*sta_remove_debugfs)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct dentry *dir);
+#endif
void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum sta_notify_cmd, struct ieee80211_sta *sta);
int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
@@ -2514,6 +2548,7 @@ struct ieee80211_ops {
int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
int (*remain_on_channel)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type,
int duration);