diff options
Diffstat (limited to 'lib/Kconfig.debug')
| -rw-r--r-- | lib/Kconfig.debug | 178 |
1 files changed, 137 insertions, 41 deletions
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 8911558..79e0dff 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -76,7 +76,6 @@ config UNUSED_SYMBOLS config DEBUG_FS bool "Debug Filesystem" - depends on SYSFS help debugfs is a virtual file system that kernel developers use to put debugging files into. Enable this option to be able to read and @@ -103,9 +102,10 @@ config HEADERS_CHECK config DEBUG_SECTION_MISMATCH bool "Enable full Section mismatch analysis" - depends on UNDEFINED + depends on UNDEFINED || (BLACKFIN) + default y # This option is on purpose disabled for now. - # It will be enabled when we are down to a resonable number + # It will be enabled when we are down to a reasonable number # of section mismatch warnings (< 10 for an allyesconfig build) help The section mismatch analysis checks if there are illegal @@ -151,28 +151,33 @@ config DEBUG_SHIRQ Drivers ought to be able to handle interrupts coming in at those points; some don't and need to be caught. -config DETECT_SOFTLOCKUP - bool "Detect Soft Lockups" +config LOCKUP_DETECTOR + bool "Detect Hard and Soft Lockups" depends on DEBUG_KERNEL && !S390 - default y help - Say Y here to enable the kernel to detect "soft lockups", - which are bugs that cause the kernel to loop in kernel + Say Y here to enable the kernel to act as a watchdog to detect + hard and soft lockups. + + Softlockups are bugs that cause the kernel to loop in kernel mode for more than 60 seconds, without giving other tasks a - chance to run. + chance to run. The current stack trace is displayed upon + detection and the system will stay locked up. - When a soft-lockup is detected, the kernel will print the - current stack trace (which you should report), but the - system will stay locked up. This feature has negligible - overhead. + Hardlockups are bugs that cause the CPU to loop in kernel mode + for more than 60 seconds, without letting other interrupts have a + chance to run. The current stack trace is displayed upon detection + and the system will stay locked up. + + The overhead should be minimal. A periodic hrtimer runs to + generate interrupts and kick the watchdog task every 10-12 seconds. + An NMI is generated every 60 seconds or so to check for hardlockups. - (Note that "hard lockups" are separate type of bugs that - can be detected via the NMI-watchdog, on platforms that - support it.) +config HARDLOCKUP_DETECTOR + def_bool LOCKUP_DETECTOR && PERF_EVENTS && HAVE_PERF_EVENTS_NMI config BOOTPARAM_SOFTLOCKUP_PANIC bool "Panic (Reboot) On Soft Lockups" - depends on DETECT_SOFTLOCKUP + depends on LOCKUP_DETECTOR help Say Y here to enable the kernel to panic on "soft lockups", which are bugs that cause the kernel to loop in kernel @@ -189,7 +194,7 @@ config BOOTPARAM_SOFTLOCKUP_PANIC config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE int - depends on DETECT_SOFTLOCKUP + depends on LOCKUP_DETECTOR range 0 1 default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC default 1 if BOOTPARAM_SOFTLOCKUP_PANIC @@ -298,6 +303,20 @@ config DEBUG_OBJECTS_TIMERS timer routines to track the life time of timer objects and validate the timer operations. +config DEBUG_OBJECTS_WORK + bool "Debug work objects" + depends on DEBUG_OBJECTS + help + If you say Y here, additional code will be inserted into the + work queue routines to track the life time of work objects and + validate the work operations. + +config DEBUG_OBJECTS_RCU_HEAD + bool "Debug RCU callbacks objects" + depends on DEBUG_OBJECTS && PREEMPT + help + Enable this to turn on debugging of RCU list heads (call_rcu() usage). + config DEBUG_OBJECTS_ENABLE_DEFAULT int "debug_objects bootup default value (0-1)" range 0 1 @@ -346,11 +365,13 @@ config SLUB_STATS config DEBUG_KMEMLEAK bool "Kernel memory leak detector" - depends on DEBUG_KERNEL && EXPERIMENTAL && (X86 || ARM || PPC) && \ - !MEMORY_HOTPLUG + depends on DEBUG_KERNEL && EXPERIMENTAL && !MEMORY_HOTPLUG && \ + (X86 || ARM || PPC || S390 || SPARC64 || SUPERH || MICROBLAZE) + select DEBUG_FS if SYSFS select STACKTRACE if STACKTRACE_SUPPORT select KALLSYMS + select CRC32 help Say Y here if you want to enable the memory leak detector. The memory allocation/freeing is traced in a way @@ -370,7 +391,7 @@ config DEBUG_KMEMLEAK config DEBUG_KMEMLEAK_EARLY_LOG_SIZE int "Maximum kmemleak early log entries" depends on DEBUG_KMEMLEAK - range 200 2000 + range 200 40000 default 400 help Kmemleak must track all the memory allocations to avoid @@ -391,7 +412,7 @@ config DEBUG_KMEMLEAK_TEST config DEBUG_PREEMPT bool "Debug preemptible kernel" - depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64) + depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT default y help If you say Y here then the kernel will use a debug variant of the @@ -489,11 +510,35 @@ config PROVE_LOCKING For more details, see Documentation/lockdep-design.txt. +config PROVE_RCU + bool "RCU debugging: prove RCU correctness" + depends on PROVE_LOCKING + default n + help + This feature enables lockdep extensions that check for correct + use of RCU APIs. This is currently under development. Say Y + if you want to debug RCU usage or help work on the PROVE_RCU + feature. + + Say N if you are unsure. + +config PROVE_RCU_REPEATEDLY + bool "RCU debugging: don't disable PROVE_RCU on first splat" + depends on PROVE_RCU + default n + help + By itself, PROVE_RCU will disable checking upon issuing the + first warning (or "splat"). This feature prevents such + disabling, allowing multiple RCU-lockdep warnings to be printed + on a single reboot. + + Say N if you are unsure. + config LOCKDEP bool depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select STACKTRACE - select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 + select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE select KALLSYMS select KALLSYMS_ALL @@ -510,6 +555,14 @@ config LOCK_STAT For more details, see Documentation/lockstat.txt + This also enables lock events required by "perf lock", + subcommand of perf. + If you want to use "perf lock", you also need to turn on + CONFIG_EVENT_TRACING. + + CONFIG_LOCK_STAT defines "contended" and "acquired" lock events. + (CONFIG_LOCKDEP defines "acquire" and "release" events.) + config DEBUG_LOCKDEP bool "Lock dependency engine debugging" depends on DEBUG_KERNEL && LOCKDEP @@ -566,7 +619,7 @@ config DEBUG_BUGVERBOSE depends on BUG depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || \ FRV || SUPERH || GENERIC_BUG || BLACKFIN || MN10300 - default !EMBEDDED + default y help Say Y here to make BUG() panics output the file name and line number of the BUG call as well as the EIP and oops trace. This aids @@ -585,6 +638,19 @@ config DEBUG_INFO If unsure, say N. +config DEBUG_INFO_REDUCED + bool "Reduce debugging information" + depends on DEBUG_INFO + help + If you say Y here gcc is instructed to generate less debugging + information for structure types. This means that tools that + need full debugging information (like kgdb or systemtap) won't + be happy. But if you merely need debugging information to + resolve line numbers there is no loss. Advantage is that + build directory object sizes shrink dramatically over a full + DEBUG_INFO build and compile times are reduced too. + Only works with newer gcc versions. + config DEBUG_VM bool "Debug VM" depends on DEBUG_KERNEL @@ -749,16 +815,28 @@ config RCU_TORTURE_TEST_RUNNABLE config RCU_CPU_STALL_DETECTOR bool "Check for stalled CPUs delaying RCU grace periods" depends on TREE_RCU || TREE_PREEMPT_RCU - default n + default y help This option causes RCU to printk information on which CPUs are delaying the current grace period, but only when the grace period extends for excessive time periods. - Say Y if you want RCU to perform such checks. + Say N if you want to disable such checks. + + Say Y if you are unsure. + +config RCU_CPU_STALL_VERBOSE + bool "Print additional per-task information for RCU_CPU_STALL_DETECTOR" + depends on RCU_CPU_STALL_DETECTOR && TREE_PREEMPT_RCU + default y + help + This option causes RCU to printk detailed per-task information + for any tasks that are stalling the current RCU grace period. Say N if you are unsure. + Say Y if you want to enable such checks. + config KPROBES_SANITY_TEST bool "Kprobes sanity tests" depends on DEBUG_KERNEL @@ -830,8 +908,7 @@ config DEBUG_FORCE_WEAK_PER_CPU config LKDTM tristate "Linux Kernel Dump Test Tool Module" - depends on DEBUG_KERNEL - depends on KPROBES + depends on DEBUG_FS depends on BLOCK default n help @@ -842,7 +919,19 @@ config LKDTM called lkdtm. Documentation on how to use the module can be found in - drivers/misc/lkdtm.c + Documentation/fault-injection/provoke-crashes.txt + +config CPU_NOTIFIER_ERROR_INJECT + tristate "CPU notifier error injection module" + depends on HOTPLUG_CPU && DEBUG_KERNEL + help + This option provides a kernel module that can be used to test + the error handling of the cpu notifiers + + To compile this code as a module, choose M here: the module will + be called cpu-notifier-error-inject. + + If unsure, say N. config FAULT_INJECTION bool "Fault-injection framework" @@ -871,7 +960,7 @@ config FAIL_MAKE_REQUEST Provide fault-injection capability for disk IO. config FAIL_IO_TIMEOUT - bool "Faul-injection capability for faking disk interrupts" + bool "Fault-injection capability for faking disk interrupts" depends on FAULT_INJECTION && BLOCK help Provide fault-injection capability on end IO handling. This @@ -892,13 +981,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT depends on !X86_64 select STACKTRACE - select FRAME_POINTER if !PPC && !S390 + select FRAME_POINTER if !PPC && !S390 && !MICROBLAZE help Provide stacktrace filter for fault-injection capabilities config LATENCYTOP bool "Latency measuring infrastructure" - select FRAME_POINTER if !MIPS && !PPC && !S390 + select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE select KALLSYMS select KALLSYMS_ALL select STACKTRACE @@ -911,7 +1000,7 @@ config LATENCYTOP config SYSCTL_SYSCALL_CHECK bool "Sysctl checks" - depends on SYSCTL_SYSCALL + depends on SYSCTL ---help--- sys_sysctl uses binary paths that have been found challenging to properly maintain and use. This enables checks that help @@ -985,10 +1074,10 @@ config DYNAMIC_DEBUG Usage: - Dynamic debugging is controlled via the 'dynamic_debug/ddebug' file, + Dynamic debugging is controlled via the 'dynamic_debug/control' file, which is contained in the 'debugfs' filesystem. Thus, the debugfs filesystem must first be mounted before making use of this feature. - We refer the control file as: <debugfs>/dynamic_debug/ddebug. This + We refer the control file as: <debugfs>/dynamic_debug/control. This file contains a list of the debug statements that can be enabled. The format for each line of the file is: @@ -1003,7 +1092,7 @@ config DYNAMIC_DEBUG From a live system: - nullarbor:~ # cat <debugfs>/dynamic_debug/ddebug + nullarbor:~ # cat <debugfs>/dynamic_debug/control # filename:lineno [module]function flags format fs/aio.c:222 [aio]__put_ioctx - "__put_ioctx:\040freeing\040%p\012" fs/aio.c:248 [aio]ioctx_alloc - "ENOMEM:\040nr_events\040too\040high\012" @@ -1013,23 +1102,23 @@ config DYNAMIC_DEBUG // enable the message at line 1603 of file svcsock.c nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' > - <debugfs>/dynamic_debug/ddebug + <debugfs>/dynamic_debug/control // enable all the messages in file svcsock.c nullarbor:~ # echo -n 'file svcsock.c +p' > - <debugfs>/dynamic_debug/ddebug + <debugfs>/dynamic_debug/control // enable all the messages in the NFS server module nullarbor:~ # echo -n 'module nfsd +p' > - <debugfs>/dynamic_debug/ddebug + <debugfs>/dynamic_debug/control // enable all 12 messages in the function svc_process() nullarbor:~ # echo -n 'func svc_process +p' > - <debugfs>/dynamic_debug/ddebug + <debugfs>/dynamic_debug/control // disable all 12 messages in the function svc_process() nullarbor:~ # echo -n 'func svc_process -p' > - <debugfs>/dynamic_debug/ddebug + <debugfs>/dynamic_debug/control See Documentation/dynamic-debug-howto.txt for additional information. @@ -1044,6 +1133,13 @@ config DMA_API_DEBUG This option causes a performance degredation. Use only if you want to debug device drivers. If unsure, say N. +config ATOMIC64_SELFTEST + bool "Perform an atomic64_t self-test at boot" + help + Enable this option to test the atomic64_t functions at boot. + + If unsure, say N. + source "samples/Kconfig" source "lib/Kconfig.kgdb" |