diff options
Diffstat (limited to 'net/mac80211/scan.c')
-rw-r--r-- | net/mac80211/scan.c | 75 |
1 files changed, 27 insertions, 48 deletions
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index bf82e69..43a45cf 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -27,22 +27,15 @@ #define IEEE80211_PROBE_DELAY (HZ / 33) #define IEEE80211_CHANNEL_TIME (HZ / 33) -#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8) - -static void ieee80211_rx_bss_free(struct cfg80211_bss *cbss) -{ - struct ieee80211_bss *bss = (void *)cbss->priv; - - kfree(bss_mesh_id(bss)); - kfree(bss_mesh_cfg(bss)); -} +#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 9) void ieee80211_rx_bss_put(struct ieee80211_local *local, struct ieee80211_bss *bss) { if (!bss) return; - cfg80211_put_bss(container_of((void *)bss, struct cfg80211_bss, priv)); + cfg80211_put_bss(local->hw.wiphy, + container_of((void *)bss, struct cfg80211_bss, priv)); } static bool is_uapsd_supported(struct ieee802_11_elems *elems) @@ -65,12 +58,11 @@ static bool is_uapsd_supported(struct ieee802_11_elems *elems) struct ieee80211_bss * ieee80211_bss_info_update(struct ieee80211_local *local, struct ieee80211_rx_status *rx_status, - struct ieee80211_mgmt *mgmt, - size_t len, + struct ieee80211_mgmt *mgmt, size_t len, struct ieee802_11_elems *elems, - struct ieee80211_channel *channel, - bool beacon) + struct ieee80211_channel *channel) { + bool beacon = ieee80211_is_beacon(mgmt->frame_control); struct cfg80211_bss *cbss; struct ieee80211_bss *bss; int clen, srlen; @@ -86,10 +78,12 @@ ieee80211_bss_info_update(struct ieee80211_local *local, if (!cbss) return NULL; - cbss->free_priv = ieee80211_rx_bss_free; bss = (void *)cbss->priv; - bss->device_ts = rx_status->device_timestamp; + if (beacon) + bss->device_ts_beacon = rx_status->device_timestamp; + else + bss->device_ts_presp = rx_status->device_timestamp; if (elems->parse_error) { if (beacon) @@ -147,9 +141,6 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss->valid_data |= IEEE80211_BSS_VALID_WMM; } - if (!beacon) - bss->last_probe_resp = jiffies; - return bss; } @@ -203,7 +194,7 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb) bss = ieee80211_bss_info_update(local, rx_status, mgmt, skb->len, &elems, - channel, beacon); + channel); if (bss) ieee80211_rx_bss_put(local, bss); } @@ -343,6 +334,9 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) ieee80211_offchannel_stop_vifs(local); + /* ensure nullfunc is transmitted before leaving operating channel */ + drv_flush(local, false); + ieee80211_configure_filter(local); /* We need to set power level at maximum rate for scanning. */ @@ -357,6 +351,9 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) static bool ieee80211_can_scan(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata) { + if (local->radar_detect_enabled) + return false; + if (!list_empty(&local->roc_list)) return false; @@ -391,6 +388,11 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, int i; struct ieee80211_sub_if_data *sdata; enum ieee80211_band band = local->hw.conf.channel->band; + u32 tx_flags; + + tx_flags = IEEE80211_TX_INTFL_OFFCHAN_TX_OK; + if (local->scan_req->no_cck) + tx_flags |= IEEE80211_TX_CTL_NO_CCK_RATE; sdata = rcu_dereference_protected(local->scan_sdata, lockdep_is_held(&local->mtx)); @@ -402,8 +404,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, local->scan_req->ssids[i].ssid_len, local->scan_req->ie, local->scan_req->ie_len, local->scan_req->rates[band], false, - local->scan_req->no_cck, - local->hw.conf.channel, true); + tx_flags, local->hw.conf.channel, true); /* * After sending probe requests, wait for probe responses @@ -547,8 +548,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local, bool associated = false; bool tx_empty = true; bool bad_latency; - bool listen_int_exceeded; - unsigned long min_beacon_int = 0; struct ieee80211_sub_if_data *sdata; struct ieee80211_channel *next_chan; enum mac80211_scan_state next_scan_state; @@ -567,11 +566,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local, if (sdata->u.mgd.associated) { associated = true; - if (sdata->vif.bss_conf.beacon_int < - min_beacon_int || min_beacon_int == 0) - min_beacon_int = - sdata->vif.bss_conf.beacon_int; - if (!qdisc_all_tx_empty(sdata->dev)) { tx_empty = false; break; @@ -588,34 +582,19 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local, * see if we can scan another channel without interfering * with the current traffic situation. * - * Since we don't know if the AP has pending frames for us - * we can only check for our tx queues and use the current - * pm_qos requirements for rx. Hence, if no tx traffic occurs - * at all we will scan as many channels in a row as the pm_qos - * latency allows us to. Additionally we also check for the - * currently negotiated listen interval to prevent losing - * frames unnecessarily. - * - * Otherwise switch back to the operating channel. + * Keep good latency, do not stay off-channel more than 125 ms. */ bad_latency = time_after(jiffies + - ieee80211_scan_get_channel_time(next_chan), - local->leave_oper_channel_time + - usecs_to_jiffies(pm_qos_request(PM_QOS_NETWORK_LATENCY))); - - listen_int_exceeded = time_after(jiffies + - ieee80211_scan_get_channel_time(next_chan), - local->leave_oper_channel_time + - usecs_to_jiffies(min_beacon_int * 1024) * - local->hw.conf.listen_interval); + ieee80211_scan_get_channel_time(next_chan), + local->leave_oper_channel_time + HZ / 8); if (associated && !tx_empty) { if (local->scan_req->flags & NL80211_SCAN_FLAG_LOW_PRIORITY) next_scan_state = SCAN_ABORT; else next_scan_state = SCAN_SUSPEND; - } else if (associated && (bad_latency || listen_int_exceeded)) { + } else if (associated && bad_latency) { next_scan_state = SCAN_SUSPEND; } else { next_scan_state = SCAN_SET_CHANNEL; |