summaryrefslogtreecommitdiff
path: root/net/netfilter/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'net/netfilter/Kconfig')
-rw-r--r--net/netfilter/Kconfig193
1 files changed, 185 insertions, 8 deletions
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index f619c65..3a66878 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -25,19 +25,57 @@ config NETFILTER_NETLINK_LOG
and is also scheduled to replace the old syslog-based ipt_LOG
and ip6t_LOG modules.
-config NF_CONNTRACK
- tristate "Layer 3 Independent Connection tracking (EXPERIMENTAL)"
- depends on EXPERIMENTAL && IP_NF_CONNTRACK=n
- default n
- ---help---
+config NF_CONNTRACK_ENABLED
+ tristate "Netfilter connection tracking support"
+ help
Connection tracking keeps a record of what packets have passed
through your machine, in order to figure out how they are related
into connections.
+ This is required to do Masquerading or other kinds of Network
+ Address Translation (except for Fast NAT). It can also be used to
+ enhance packet filtering (see `Connection state match support'
+ below).
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+choice
+ prompt "Netfilter connection tracking support"
+ depends on NF_CONNTRACK_ENABLED
+
+config NF_CONNTRACK_SUPPORT
+ bool "Layer 3 Independent Connection tracking (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
Layer 3 independent connection tracking is experimental scheme
which generalize ip_conntrack to support other layer 3 protocols.
- To compile it as a module, choose M here. If unsure, say N.
+ This is required to do Masquerading or other kinds of Network
+ Address Translation (except for Fast NAT). It can also be used to
+ enhance packet filtering (see `Connection state match support'
+ below).
+
+config IP_NF_CONNTRACK_SUPPORT
+ bool "Layer 3 Dependent Connection tracking (OBSOLETE)"
+ help
+ The old, Layer 3 dependent ip_conntrack subsystem of netfilter.
+
+ This is required to do Masquerading or other kinds of Network
+ Address Translation (except for Fast NAT). It can also be used to
+ enhance packet filtering (see `Connection state match support'
+ below).
+
+endchoice
+
+config NF_CONNTRACK
+ tristate
+ default m if NF_CONNTRACK_SUPPORT && NF_CONNTRACK_ENABLED=m
+ default y if NF_CONNTRACK_SUPPORT && NF_CONNTRACK_ENABLED=y
+
+config IP_NF_CONNTRACK
+ tristate
+ default m if IP_NF_CONNTRACK_SUPPORT && NF_CONNTRACK_ENABLED=m
+ default y if IP_NF_CONNTRACK_SUPPORT && NF_CONNTRACK_ENABLED=y
config NF_CT_ACCT
bool "Connection tracking flow accounting"
@@ -82,8 +120,12 @@ config NF_CONNTRACK_EVENTS
If unsure, say `N'.
+config NF_CT_PROTO_GRE
+ tristate
+ depends on EXPERIMENTAL && NF_CONNTRACK
+
config NF_CT_PROTO_SCTP
- tristate 'SCTP protocol on new connection tracking support (EXPERIMENTAL)'
+ tristate 'SCTP protocol connection tracking support (EXPERIMENTAL)'
depends on EXPERIMENTAL && NF_CONNTRACK
default n
help
@@ -93,8 +135,23 @@ config NF_CT_PROTO_SCTP
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
+config NF_CONNTRACK_AMANDA
+ tristate "Amanda backup protocol support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && NF_CONNTRACK
+ select TEXTSEARCH
+ select TEXTSEARCH_KMP
+ help
+ If you are running the Amanda backup package <http://www.amanda.org/>
+ on this machine or machines that will be MASQUERADED through this
+ machine, then you may want to enable this feature. This allows the
+ connection tracking and natting code to allow the sub-channels that
+ Amanda requires for communication of the backup data, messages and
+ index.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config NF_CONNTRACK_FTP
- tristate "FTP support on new connection tracking (EXPERIMENTAL)"
+ tristate "FTP protocol support (EXPERIMENTAL)"
depends on EXPERIMENTAL && NF_CONNTRACK
help
Tracking FTP connections is problematic: special helpers are
@@ -107,6 +164,101 @@ config NF_CONNTRACK_FTP
To compile it as a module, choose M here. If unsure, say N.
+config NF_CONNTRACK_H323
+ tristate "H.323 protocol support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && NF_CONNTRACK
+ help
+ H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+ important VoIP protocols, it is widely used by voice hardware and
+ software including voice gateways, IP phones, Netmeeting, OpenPhone,
+ Gnomemeeting, etc.
+
+ With this module you can support H.323 on a connection tracking/NAT
+ firewall.
+
+ This module supports RAS, Fast Start, H.245 Tunnelling, Call
+ Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat,
+ whiteboard, file transfer, etc. For more information, please
+ visit http://nath323.sourceforge.net/.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config NF_CONNTRACK_IRC
+ tristate "IRC protocol support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && NF_CONNTRACK
+ help
+ There is a commonly-used extension to IRC called
+ Direct Client-to-Client Protocol (DCC). This enables users to send
+ files to each other, and also chat to each other without the need
+ of a server. DCC Sending is used anywhere you send files over IRC,
+ and DCC Chat is most commonly used by Eggdrop bots. If you are
+ using NAT, this extension will enable you to send files and initiate
+ chats. Note that you do NOT need this extension to get files or
+ have others initiate chats, or everything else in IRC.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config NF_CONNTRACK_NETBIOS_NS
+ tristate "NetBIOS name service protocol support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && NF_CONNTRACK
+ help
+ NetBIOS name service requests are sent as broadcast messages from an
+ unprivileged port and responded to with unicast messages to the
+ same port. This make them hard to firewall properly because connection
+ tracking doesn't deal with broadcasts. This helper tracks locally
+ originating NetBIOS name service requests and the corresponding
+ responses. It relies on correct IP address configuration, specifically
+ netmask and broadcast address. When properly configured, the output
+ of "ip address show" should look similar to this:
+
+ $ ip -4 address show eth0
+ 4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
+ inet 172.16.2.252/24 brd 172.16.2.255 scope global eth0
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config NF_CONNTRACK_PPTP
+ tristate "PPtP protocol support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && NF_CONNTRACK
+ select NF_CT_PROTO_GRE
+ help
+ This module adds support for PPTP (Point to Point Tunnelling
+ Protocol, RFC2637) connection tracking and NAT.
+
+ If you are running PPTP sessions over a stateful firewall or NAT
+ box, you may want to enable this feature.
+
+ Please note that not all PPTP modes of operation are supported yet.
+ Specifically these limitations exist:
+ - Blindy assumes that control connections are always established
+ in PNS->PAC direction. This is a violation of RFC2637.
+ - Only supports a single call within each session
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config NF_CONNTRACK_SIP
+ tristate "SIP protocol support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && NF_CONNTRACK
+ help
+ SIP is an application-layer control protocol that can establish,
+ modify, and terminate multimedia sessions (conferences) such as
+ Internet telephony calls. With the ip_conntrack_sip and
+ the nf_nat_sip modules you can support the protocol on a connection
+ tracking/NATing firewall.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config NF_CONNTRACK_TFTP
+ tristate "TFTP protocol support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && NF_CONNTRACK
+ help
+ TFTP connection tracking helper, this is required depending
+ on how restrictive your ruleset is.
+ If you are using a tftp client behind -j SNAT or -j MASQUERADING
+ you will need this.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config NF_CT_NETLINK
tristate 'Connection tracking netlink interface (EXPERIMENTAL)'
depends on EXPERIMENTAL && NF_CONNTRACK && NETFILTER_NETLINK
@@ -184,6 +336,17 @@ config NETFILTER_XT_TARGET_NFQUEUE
To compile it as a module, choose M here. If unsure, say N.
+config NETFILTER_XT_TARGET_NFLOG
+ tristate '"NFLOG" target support'
+ depends on NETFILTER_XTABLES
+ help
+ This option enables the NFLOG target, which allows to LOG
+ messages through the netfilter logging API, which can use
+ either the old LOG target, the old ULOG target or nfnetlink_log
+ as backend.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config NETFILTER_XT_TARGET_NOTRACK
tristate '"NOTRACK" target support'
depends on NETFILTER_XTABLES
@@ -464,5 +627,19 @@ config NETFILTER_XT_MATCH_TCPMSS
To compile it as a module, choose M here. If unsure, say N.
+config NETFILTER_XT_MATCH_HASHLIMIT
+ tristate '"hashlimit" match support'
+ depends on NETFILTER_XTABLES
+ help
+ This option adds a `hashlimit' match.
+
+ As opposed to `limit', this match dynamically creates a hash table
+ of limit buckets, based on your selection of source/destination
+ addresses and/or ports.
+
+ It enables you to express policies like `10kpps for any given
+ destination address' or `500pps from any given source address'
+ with a single rule.
+
endmenu