diff options
Diffstat (limited to 'sound/pci/cs46xx')
| -rw-r--r-- | sound/pci/cs46xx/cs46xx.c | 7 | ||||
| -rw-r--r-- | sound/pci/cs46xx/cs46xx.h | 1744 | ||||
| -rw-r--r-- | sound/pci/cs46xx/cs46xx_dsp_scb_types.h | 1213 | ||||
| -rw-r--r-- | sound/pci/cs46xx/cs46xx_dsp_spos.h | 234 | ||||
| -rw-r--r-- | sound/pci/cs46xx/cs46xx_dsp_task_types.h | 252 | ||||
| -rw-r--r-- | sound/pci/cs46xx/cs46xx_lib.c | 16 | ||||
| -rw-r--r-- | sound/pci/cs46xx/dsp_spos.c | 2 | ||||
| -rw-r--r-- | sound/pci/cs46xx/dsp_spos_scb_lib.c | 2 |
8 files changed, 3459 insertions, 11 deletions
diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c index 6cc7404..1e007c7 100644 --- a/sound/pci/cs46xx/cs46xx.c +++ b/sound/pci/cs46xx/cs46xx.c @@ -30,7 +30,7 @@ #include <linux/init.h> #include <linux/module.h> #include <sound/core.h> -#include <sound/cs46xx.h> +#include "cs46xx.h" #include <sound/initval.h> MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>"); @@ -167,8 +167,9 @@ static struct pci_driver cs46xx_driver = { .probe = snd_card_cs46xx_probe, .remove = __devexit_p(snd_card_cs46xx_remove), #ifdef CONFIG_PM - .suspend = snd_cs46xx_suspend, - .resume = snd_cs46xx_resume, + .driver = { + .pm = &snd_cs46xx_pm, + }, #endif }; diff --git a/sound/pci/cs46xx/cs46xx.h b/sound/pci/cs46xx/cs46xx.h new file mode 100644 index 0000000..29d8a8d --- /dev/null +++ b/sound/pci/cs46xx/cs46xx.h @@ -0,0 +1,1744 @@ +#ifndef __SOUND_CS46XX_H +#define __SOUND_CS46XX_H + +/* + * Copyright (c) by Jaroslav Kysela <perex@perex.cz>, + * Cirrus Logic, Inc. + * Definitions for Cirrus Logic CS46xx chips + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <sound/pcm.h> +#include <sound/pcm-indirect.h> +#include <sound/rawmidi.h> +#include <sound/ac97_codec.h> +#include "cs46xx_dsp_spos.h" + +/* + * Direct registers + */ + +/* + * The following define the offsets of the registers accessed via base address + * register zero on the CS46xx part. + */ +#define BA0_HISR 0x00000000 +#define BA0_HSR0 0x00000004 +#define BA0_HICR 0x00000008 +#define BA0_DMSR 0x00000100 +#define BA0_HSAR 0x00000110 +#define BA0_HDAR 0x00000114 +#define BA0_HDMR 0x00000118 +#define BA0_HDCR 0x0000011C +#define BA0_PFMC 0x00000200 +#define BA0_PFCV1 0x00000204 +#define BA0_PFCV2 0x00000208 +#define BA0_PCICFG00 0x00000300 +#define BA0_PCICFG04 0x00000304 +#define BA0_PCICFG08 0x00000308 +#define BA0_PCICFG0C 0x0000030C +#define BA0_PCICFG10 0x00000310 +#define BA0_PCICFG14 0x00000314 +#define BA0_PCICFG18 0x00000318 +#define BA0_PCICFG1C 0x0000031C +#define BA0_PCICFG20 0x00000320 +#define BA0_PCICFG24 0x00000324 +#define BA0_PCICFG28 0x00000328 +#define BA0_PCICFG2C 0x0000032C +#define BA0_PCICFG30 0x00000330 +#define BA0_PCICFG34 0x00000334 +#define BA0_PCICFG38 0x00000338 +#define BA0_PCICFG3C 0x0000033C +#define BA0_CLKCR1 0x00000400 +#define BA0_CLKCR2 0x00000404 +#define BA0_PLLM 0x00000408 +#define BA0_PLLCC 0x0000040C +#define BA0_FRR 0x00000410 +#define BA0_CFL1 0x00000414 +#define BA0_CFL2 0x00000418 +#define BA0_SERMC1 0x00000420 +#define BA0_SERMC2 0x00000424 +#define BA0_SERC1 0x00000428 +#define BA0_SERC2 0x0000042C +#define BA0_SERC3 0x00000430 +#define BA0_SERC4 0x00000434 +#define BA0_SERC5 0x00000438 +#define BA0_SERBSP 0x0000043C +#define BA0_SERBST 0x00000440 +#define BA0_SERBCM 0x00000444 +#define BA0_SERBAD 0x00000448 +#define BA0_SERBCF 0x0000044C +#define BA0_SERBWP 0x00000450 +#define BA0_SERBRP 0x00000454 +#ifndef NO_CS4612 +#define BA0_ASER_FADDR 0x00000458 +#endif +#define BA0_ACCTL 0x00000460 +#define BA0_ACSTS 0x00000464 +#define BA0_ACOSV 0x00000468 +#define BA0_ACCAD 0x0000046C +#define BA0_ACCDA 0x00000470 +#define BA0_ACISV 0x00000474 +#define BA0_ACSAD 0x00000478 +#define BA0_ACSDA 0x0000047C +#define BA0_JSPT 0x00000480 +#define BA0_JSCTL 0x00000484 +#define BA0_JSC1 0x00000488 +#define BA0_JSC2 0x0000048C +#define BA0_MIDCR 0x00000490 +#define BA0_MIDSR 0x00000494 +#define BA0_MIDWP 0x00000498 +#define BA0_MIDRP 0x0000049C +#define BA0_JSIO 0x000004A0 +#ifndef NO_CS4612 +#define BA0_ASER_MASTER 0x000004A4 +#endif +#define BA0_CFGI 0x000004B0 +#define BA0_SSVID 0x000004B4 +#define BA0_GPIOR 0x000004B8 +#ifndef NO_CS4612 +#define BA0_EGPIODR 0x000004BC +#define BA0_EGPIOPTR 0x000004C0 +#define BA0_EGPIOTR 0x000004C4 +#define BA0_EGPIOWR 0x000004C8 +#define BA0_EGPIOSR 0x000004CC +#define BA0_SERC6 0x000004D0 +#define BA0_SERC7 0x000004D4 +#define BA0_SERACC 0x000004D8 +#define BA0_ACCTL2 0x000004E0 +#define BA0_ACSTS2 0x000004E4 +#define BA0_ACOSV2 0x000004E8 +#define BA0_ACCAD2 0x000004EC +#define BA0_ACCDA2 0x000004F0 +#define BA0_ACISV2 0x000004F4 +#define BA0_ACSAD2 0x000004F8 +#define BA0_ACSDA2 0x000004FC +#define BA0_IOTAC0 0x00000500 +#define BA0_IOTAC1 0x00000504 +#define BA0_IOTAC2 0x00000508 +#define BA0_IOTAC3 0x0000050C +#define BA0_IOTAC4 0x00000510 +#define BA0_IOTAC5 0x00000514 +#define BA0_IOTAC6 0x00000518 +#define BA0_IOTAC7 0x0000051C +#define BA0_IOTAC8 0x00000520 +#define BA0_IOTAC9 0x00000524 +#define BA0_IOTAC10 0x00000528 +#define BA0_IOTAC11 0x0000052C +#define BA0_IOTFR0 0x00000540 +#define BA0_IOTFR1 0x00000544 +#define BA0_IOTFR2 0x00000548 +#define BA0_IOTFR3 0x0000054C +#define BA0_IOTFR4 0x00000550 +#define BA0_IOTFR5 0x00000554 +#define BA0_IOTFR6 0x00000558 +#define BA0_IOTFR7 0x0000055C +#define BA0_IOTFIFO 0x00000580 +#define BA0_IOTRRD 0x00000584 +#define BA0_IOTFP 0x00000588 +#define BA0_IOTCR 0x0000058C +#define BA0_DPCID 0x00000590 +#define BA0_DPCIA 0x00000594 +#define BA0_DPCIC 0x00000598 +#define BA0_PCPCIR 0x00000600 +#define BA0_PCPCIG 0x00000604 +#define BA0_PCPCIEN 0x00000608 +#define BA0_EPCIPMC 0x00000610 +#endif + +/* + * The following define the offsets of the registers and memories accessed via + * base address register one on the CS46xx part. + */ +#define BA1_SP_DMEM0 0x00000000 +#define BA1_SP_DMEM1 0x00010000 +#define BA1_SP_PMEM 0x00020000 +#define BA1_SP_REG 0x00030000 +#define BA1_SPCR 0x00030000 +#define BA1_DREG 0x00030004 +#define BA1_DSRWP 0x00030008 +#define BA1_TWPR 0x0003000C +#define BA1_SPWR 0x00030010 +#define BA1_SPIR 0x00030014 +#define BA1_FGR1 0x00030020 +#define BA1_SPCS 0x00030028 +#define BA1_SDSR 0x0003002C +#define BA1_FRMT 0x00030030 +#define BA1_FRCC 0x00030034 +#define BA1_FRSC 0x00030038 +#define BA1_OMNI_MEM 0x000E0000 + + +/* + * The following defines are for the flags in the host interrupt status + * register. + */ +#define HISR_VC_MASK 0x0000FFFF +#define HISR_VC0 0x00000001 +#define HISR_VC1 0x00000002 +#define HISR_VC2 0x00000004 +#define HISR_VC3 0x00000008 +#define HISR_VC4 0x00000010 +#define HISR_VC5 0x00000020 +#define HISR_VC6 0x00000040 +#define HISR_VC7 0x00000080 +#define HISR_VC8 0x00000100 +#define HISR_VC9 0x00000200 +#define HISR_VC10 0x00000400 +#define HISR_VC11 0x00000800 +#define HISR_VC12 0x00001000 +#define HISR_VC13 0x00002000 +#define HISR_VC14 0x00004000 +#define HISR_VC15 0x00008000 +#define HISR_INT0 0x00010000 +#define HISR_INT1 0x00020000 +#define HISR_DMAI 0x00040000 +#define HISR_FROVR 0x00080000 +#define HISR_MIDI 0x00100000 +#ifdef NO_CS4612 +#define HISR_RESERVED 0x0FE00000 +#else +#define HISR_SBINT 0x00200000 +#define HISR_RESERVED 0x0FC00000 +#endif +#define HISR_H0P 0x40000000 +#define HISR_INTENA 0x80000000 + +/* + * The following defines are for the flags in the host signal register 0. + */ +#define HSR0_VC_MASK 0xFFFFFFFF +#define HSR0_VC16 0x00000001 +#define HSR0_VC17 0x00000002 +#define HSR0_VC18 0x00000004 +#define HSR0_VC19 0x00000008 +#define HSR0_VC20 0x00000010 +#define HSR0_VC21 0x00000020 +#define HSR0_VC22 0x00000040 +#define HSR0_VC23 0x00000080 +#define HSR0_VC24 0x00000100 +#define HSR0_VC25 0x00000200 +#define HSR0_VC26 0x00000400 +#define HSR0_VC27 0x00000800 +#define HSR0_VC28 0x00001000 +#define HSR0_VC29 0x00002000 +#define HSR0_VC30 0x00004000 +#define HSR0_VC31 0x00008000 +#define HSR0_VC32 0x00010000 +#define HSR0_VC33 0x00020000 +#define HSR0_VC34 0x00040000 +#define HSR0_VC35 0x00080000 +#define HSR0_VC36 0x00100000 +#define HSR0_VC37 0x00200000 +#define HSR0_VC38 0x00400000 +#define HSR0_VC39 0x00800000 +#define HSR0_VC40 0x01000000 +#define HSR0_VC41 0x02000000 +#define HSR0_VC42 0x04000000 +#define HSR0_VC43 0x08000000 +#define HSR0_VC44 0x10000000 +#define HSR0_VC45 0x20000000 +#define HSR0_VC46 0x40000000 +#define HSR0_VC47 0x80000000 + +/* + * The following defines are for the flags in the host interrupt control + * register. + */ +#define HICR_IEV 0x00000001 +#define HICR_CHGM 0x00000002 + +/* + * The following defines are for the flags in the DMA status register. + */ +#define DMSR_HP 0x00000001 +#define DMSR_HR 0x00000002 +#define DMSR_SP 0x00000004 +#define DMSR_SR 0x00000008 + +/* + * The following defines are for the flags in the host DMA source address + * register. + */ +#define HSAR_HOST_ADDR_MASK 0xFFFFFFFF +#define HSAR_DSP_ADDR_MASK 0x0000FFFF +#define HSAR_MEMID_MASK 0x000F0000 +#define HSAR_MEMID_SP_DMEM0 0x00000000 +#define HSAR_MEMID_SP_DMEM1 0x00010000 +#define HSAR_MEMID_SP_PMEM 0x00020000 +#define HSAR_MEMID_SP_DEBUG 0x00030000 +#define HSAR_MEMID_OMNI_MEM 0x000E0000 +#define HSAR_END 0x40000000 +#define HSAR_ERR 0x80000000 + +/* + * The following defines are for the flags in the host DMA destination address + * register. + */ +#define HDAR_HOST_ADDR_MASK 0xFFFFFFFF +#define HDAR_DSP_ADDR_MASK 0x0000FFFF +#define HDAR_MEMID_MASK 0x000F0000 +#define HDAR_MEMID_SP_DMEM0 0x00000000 +#define HDAR_MEMID_SP_DMEM1 0x00010000 +#define HDAR_MEMID_SP_PMEM 0x00020000 +#define HDAR_MEMID_SP_DEBUG 0x00030000 +#define HDAR_MEMID_OMNI_MEM 0x000E0000 +#define HDAR_END 0x40000000 +#define HDAR_ERR 0x80000000 + +/* + * The following defines are for the flags in the host DMA control register. + */ +#define HDMR_AC_MASK 0x0000F000 +#define HDMR_AC_8_16 0x00001000 +#define HDMR_AC_M_S 0x00002000 +#define HDMR_AC_B_L 0x00004000 +#define HDMR_AC_S_U 0x00008000 + +/* + * The following defines are for the flags in the host DMA control register. + */ +#define HDCR_COUNT_MASK 0x000003FF +#define HDCR_DONE 0x00004000 +#define HDCR_OPT 0x00008000 +#define HDCR_WBD 0x00400000 +#define HDCR_WBS 0x00800000 +#define HDCR_DMS_MASK 0x07000000 +#define HDCR_DMS_LINEAR 0x00000000 +#define HDCR_DMS_16_DWORDS 0x01000000 +#define HDCR_DMS_32_DWORDS 0x02000000 +#define HDCR_DMS_64_DWORDS 0x03000000 +#define HDCR_DMS_128_DWORDS 0x04000000 +#define HDCR_DMS_256_DWORDS 0x05000000 +#define HDCR_DMS_512_DWORDS 0x06000000 +#define HDCR_DMS_1024_DWORDS 0x07000000 +#define HDCR_DH 0x08000000 +#define HDCR_SMS_MASK 0x70000000 +#define HDCR_SMS_LINEAR 0x00000000 +#define HDCR_SMS_16_DWORDS 0x10000000 +#define HDCR_SMS_32_DWORDS 0x20000000 +#define HDCR_SMS_64_DWORDS 0x30000000 +#define HDCR_SMS_128_DWORDS 0x40000000 +#define HDCR_SMS_256_DWORDS 0x50000000 +#define HDCR_SMS_512_DWORDS 0x60000000 +#define HDCR_SMS_1024_DWORDS 0x70000000 +#define HDCR_SH 0x80000000 +#define HDCR_COUNT_SHIFT 0 + +/* + * The following defines are for the flags in the performance monitor control + * register. + */ +#define PFMC_C1SS_MASK 0x0000001F +#define PFMC_C1EV 0x00000020 +#define PFMC_C1RS 0x00008000 +#define PFMC_C2SS_MASK 0x001F0000 +#define PFMC_C2EV 0x00200000 +#define PFMC_C2RS 0x80000000 +#define PFMC_C1SS_SHIFT 0 +#define PFMC_C2SS_SHIFT 16 +#define PFMC_BUS_GRANT 0 +#define PFMC_GRANT_AFTER_REQ 1 +#define PFMC_TRANSACTION 2 +#define PFMC_DWORD_TRANSFER 3 +#define PFMC_SLAVE_READ 4 +#define PFMC_SLAVE_WRITE 5 +#define PFMC_PREEMPTION 6 +#define PFMC_DISCONNECT_RETRY 7 +#define PFMC_INTERRUPT 8 +#define PFMC_BUS_OWNERSHIP 9 +#define PFMC_TRANSACTION_LAG 10 +#define PFMC_PCI_CLOCK 11 +#define PFMC_SERIAL_CLOCK 12 +#define PFMC_SP_CLOCK 13 + +/* + * The following defines are for the flags in the performance counter value 1 + * register. + */ +#define PFCV1_PC1V_MASK 0xFFFFFFFF +#define PFCV1_PC1V_SHIFT 0 + +/* + * The following defines are for the flags in the performance counter value 2 + * register. + */ +#define PFCV2_PC2V_MASK 0xFFFFFFFF +#define PFCV2_PC2V_SHIFT 0 + +/* + * The following defines are for the flags in the clock control register 1. + */ +#define CLKCR1_OSCS 0x00000001 +#define CLKCR1_OSCP 0x00000002 +#define CLKCR1_PLLSS_MASK 0x0000000C +#define CLKCR1_PLLSS_SERIAL 0x00000000 +#define CLKCR1_PLLSS_CRYSTAL 0x00000004 +#define CLKCR1_PLLSS_PCI 0x00000008 +#define CLKCR1_PLLSS_RESERVED 0x0000000C +#define CLKCR1_PLLP 0x00000010 +#define CLKCR1_SWCE 0x00000020 +#define CLKCR1_PLLOS 0x00000040 + +/* + * The following defines are for the flags in the clock control register 2. + */ +#define CLKCR2_PDIVS_MASK 0x0000000F +#define CLKCR2_PDIVS_1 0x00000001 +#define CLKCR2_PDIVS_2 0x00000002 +#define CLKCR2_PDIVS_4 0x00000004 +#define CLKCR2_PDIVS_7 0x00000007 +#define CLKCR2_PDIVS_8 0x00000008 +#define CLKCR2_PDIVS_16 0x00000000 + +/* + * The following defines are for the flags in the PLL multiplier register. + */ +#define PLLM_MASK 0x000000FF +#define PLLM_SHIFT 0 + +/* + * The following defines are for the flags in the PLL capacitor coefficient + * register. + */ +#define PLLCC_CDR_MASK 0x00000007 +#ifndef NO_CS4610 +#define PLLCC_CDR_240_350_MHZ 0x00000000 +#define PLLCC_CDR_184_265_MHZ 0x00000001 +#define PLLCC_CDR_144_205_MHZ 0x00000002 +#define PLLCC_CDR_111_160_MHZ 0x00000003 +#define PLLCC_CDR_87_123_MHZ 0x00000004 +#define PLLCC_CDR_67_96_MHZ 0x00000005 +#define PLLCC_CDR_52_74_MHZ 0x00000006 +#define PLLCC_CDR_45_58_MHZ 0x00000007 +#endif +#ifndef NO_CS4612 +#define PLLCC_CDR_271_398_MHZ 0x00000000 +#define PLLCC_CDR_227_330_MHZ 0x00000001 +#define PLLCC_CDR_167_239_MHZ 0x00000002 +#define PLLCC_CDR_150_215_MHZ 0x00000003 +#define PLLCC_CDR_107_154_MHZ 0x00000004 +#define PLLCC_CDR_98_140_MHZ 0x00000005 +#define PLLCC_CDR_73_104_MHZ 0x00000006 +#define PLLCC_CDR_63_90_MHZ 0x00000007 +#endif +#define PLLCC_LPF_MASK 0x000000F8 +#ifndef NO_CS4610 +#define PLLCC_LPF_23850_60000_KHZ 0x00000000 +#define PLLCC_LPF_7960_26290_KHZ 0x00000008 +#define PLLCC_LPF_4160_10980_KHZ 0x00000018 +#define PLLCC_LPF_1740_4580_KHZ 0x00000038 +#define PLLCC_LPF_724_1910_KHZ 0x00000078 +#define PLLCC_LPF_317_798_KHZ 0x000000F8 +#endif +#ifndef NO_CS4612 +#define PLLCC_LPF_25580_64530_KHZ 0x00000000 +#define PLLCC_LPF_14360_37270_KHZ 0x00000008 +#define PLLCC_LPF_6100_16020_KHZ 0x00000018 +#define PLLCC_LPF_2540_6690_KHZ 0x00000038 +#define PLLCC_LPF_1050_2780_KHZ 0x00000078 +#define PLLCC_LPF_450_1160_KHZ 0x000000F8 +#endif + +/* + * The following defines are for the flags in the feature reporting register. + */ +#define FRR_FAB_MASK 0x00000003 +#define FRR_MASK_MASK 0x0000001C +#ifdef NO_CS4612 +#define FRR_CFOP_MASK 0x000000E0 +#else +#define FRR_CFOP_MASK 0x00000FE0 +#endif +#define FRR_CFOP_NOT_DVD 0x00000020 +#define FRR_CFOP_A3D 0x00000040 +#define FRR_CFOP_128_PIN 0x00000080 +#ifndef NO_CS4612 +#define FRR_CFOP_CS4280 0x00000800 +#endif +#define FRR_FAB_SHIFT 0 +#define FRR_MASK_SHIFT 2 +#define FRR_CFOP_SHIFT 5 + +/* + * The following defines are for the flags in the configuration load 1 + * register. + */ +#define CFL1_CLOCK_SOURCE_MASK 0x00000003 +#define CFL1_CLOCK_SOURCE_CS423X 0x00000000 +#define CFL1_CLOCK_SOURCE_AC97 0x00000001 +#define CFL1_CLOCK_SOURCE_CRYSTAL 0x00000002 +#define CFL1_CLOCK_SOURCE_DUAL_AC97 0x00000003 +#define CFL1_VALID_DATA_MASK 0x000000FF + +/* + * The following defines are for the flags in the configuration load 2 + * register. + */ +#define CFL2_VALID_DATA_MASK 0x000000FF + +/* + * The following defines are for the flags in the serial port master control + * register 1. + */ +#define SERMC1_MSPE 0x00000001 +#define SERMC1_PTC_MASK 0x0000000E +#define SERMC1_PTC_CS423X 0x00000000 +#define SERMC1_PTC_AC97 0x00000002 +#define SERMC1_PTC_DAC 0x00000004 +#define SERMC1_PLB 0x00000010 +#define SERMC1_XLB 0x00000020 + +/* + * The following defines are for the flags in the serial port master control + * register 2. + */ +#define SERMC2_LROE 0x00000001 +#define SERMC2_MCOE 0x00000002 +#define SERMC2_MCDIV 0x00000004 + +/* + * The following defines are for the flags in the serial port 1 configuration + * register. + */ +#define SERC1_SO1EN 0x00000001 +#define SERC1_SO1F_MASK 0x0000000E +#define SERC1_SO1F_CS423X 0x00000000 +#define SERC1_SO1F_AC97 0x00000002 +#define SERC1_SO1F_DAC 0x00000004 +#define SERC1_SO1F_SPDIF 0x00000006 + +/* + * The following defines are for the flags in the serial port 2 configuration + * register. + */ +#define SERC2_SI1EN 0x00000001 +#define SERC2_SI1F_MASK 0x0000000E +#define SERC2_SI1F_CS423X 0x00000000 +#define SERC2_SI1F_AC97 0x00000002 +#define SERC2_SI1F_ADC 0x00000004 +#define SERC2_SI1F_SPDIF 0x00000006 + +/* + * The following defines are for the flags in the serial port 3 configuration + * register. + */ +#define SERC3_SO2EN 0x00000001 +#define SERC3_SO2F_MASK 0x00000006 +#define SERC3_SO2F_DAC 0x00000000 +#define SERC3_SO2F_SPDIF 0x00000002 + +/* + * The following defines are for the flags in the serial port 4 configuration + * register. + */ +#define SERC4_SO3EN 0x00000001 +#define SERC4_SO3F_MASK 0x00000006 +#define SERC4_SO3F_DAC 0x00000000 +#define SERC4_SO3F_SPDIF 0x00000002 + +/* + * The following defines are for the flags in the serial port 5 configuration + * register. + */ +#define SERC5_SI2EN 0x00000001 +#define SERC5_SI2F_MASK 0x00000006 +#define SERC5_SI2F_ADC 0x00000000 +#define SERC5_SI2F_SPDIF 0x00000002 + +/* + * The following defines are for the flags in the serial port backdoor sample + * pointer register. + */ +#define SERBSP_FSP_MASK 0x0000000F +#define SERBSP_FSP_SHIFT 0 + +/* + * The following defines are for the flags in the serial port backdoor status + * register. + */ +#define SERBST_RRDY 0x00000001 +#define SERBST_WBSY 0x00000002 + +/* + * The following defines are for the flags in the serial port backdoor command + * register. + */ +#define SERBCM_RDC 0x00000001 +#define SERBCM_WRC 0x00000002 + +/* + * The following defines are for the flags in the serial port backdoor address + * register. + */ +#ifdef NO_CS4612 +#define SERBAD_FAD_MASK 0x000000FF +#else +#define SERBAD_FAD_MASK 0x000001FF +#endif +#define SERBAD_FAD_SHIFT 0 + +/* + * The following defines are for the flags in the serial port backdoor + * configuration register. + */ +#define SERBCF_HBP 0x00000001 + +/* + * The following defines are for the flags in the serial port backdoor write + * port register. + */ +#define SERBWP_FWD_MASK 0x000FFFFF +#define SERBWP_FWD_SHIFT 0 + +/* + * The following defines are for the flags in the serial port backdoor read + * port register. + */ +#define SERBRP_FRD_MASK 0x000FFFFF +#define SERBRP_FRD_SHIFT 0 + +/* + * The following defines are for the flags in the async FIFO address register. + */ +#ifndef NO_CS4612 +#define ASER_FADDR_A1_MASK 0x000001FF +#define ASER_FADDR_EN1 0x00008000 +#define ASER_FADDR_A2_MASK 0x01FF0000 +#define ASER_FADDR_EN2 0x80000000 +#define ASER_FADDR_A1_SHIFT 0 +#define ASER_FADDR_A2_SHIFT 16 +#endif + +/* + * The following defines are for the flags in the AC97 control register. + */ +#define ACCTL_RSTN 0x00000001 +#define ACCTL_ESYN 0x00000002 +#define ACCTL_VFRM 0x00000004 +#define ACCTL_DCV 0x00000008 +#define ACCTL_CRW 0x00000010 +#define ACCTL_ASYN 0x00000020 +#ifndef NO_CS4612 +#define ACCTL_TC 0x00000040 +#endif + +/* + * The following defines are for the flags in the AC97 status register. + */ +#define ACSTS_CRDY 0x00000001 +#define ACSTS_VSTS 0x00000002 +#ifndef NO_CS4612 +#define ACSTS_WKUP 0x00000004 +#endif + +/* + * The following defines are for the flags in the AC97 output slot valid + * register. + */ +#define ACOSV_SLV3 0x00000001 +#define ACOSV_SLV4 0x00000002 +#define ACOSV_SLV5 0x00000004 +#define ACOSV_SLV6 0x00000008 +#define ACOSV_SLV7 0x00000010 +#define ACOSV_SLV8 0x00000020 +#define ACOSV_SLV9 0x00000040 +#define ACOSV_SLV10 0x00000080 +#define ACOSV_SLV11 0x00000100 +#define ACOSV_SLV12 0x00000200 + +/* + * The following defines are for the flags in the AC97 command address + * register. + */ +#define ACCAD_CI_MASK 0x0000007F +#define ACCAD_CI_SHIFT 0 + +/* + * The following defines are for the flags in the AC97 command data register. + */ +#define ACCDA_CD_MASK 0x0000FFFF +#define ACCDA_CD_SHIFT 0 + +/* + * The following defines are for the flags in the AC97 input slot valid + * register. + */ +#define ACISV_ISV3 0x00000001 +#define ACISV_ISV4 0x00000002 +#define ACISV_ISV5 0x00000004 +#define ACISV_ISV6 0x00000008 +#define ACISV_ISV7 0x00000010 +#define ACISV_ISV8 0x00000020 +#define ACISV_ISV9 0x00000040 +#define ACISV_ISV10 0x00000080 +#define ACISV_ISV11 0x00000100 +#define ACISV_ISV12 0x00000200 + +/* + * The following defines are for the flags in the AC97 status address + * register. + */ +#define ACSAD_SI_MASK 0x0000007F +#define ACSAD_SI_SHIFT 0 + +/* + * The following defines are for the flags in the AC97 status data register. + */ +#define ACSDA_SD_MASK 0x0000FFFF +#define ACSDA_SD_SHIFT 0 + +/* + * The following defines are for the flags in the joystick poll/trigger + * register. + */ +#define JSPT_CAX 0x00000001 +#define JSPT_CAY 0x00000002 +#define JSPT_CBX 0x00000004 +#define JSPT_CBY 0x00000008 +#define JSPT_BA1 0x00000010 +#define JSPT_BA2 0x00000020 +#define JSPT_BB1 0x00000040 +#define JSPT_BB2 0x00000080 + +/* + * The following defines are for the flags in the joystick control register. + */ +#define JSCTL_SP_MASK 0x00000003 +#define JSCTL_SP_SLOW 0x00000000 +#define JSCTL_SP_MEDIUM_SLOW 0x00000001 +#define JSCTL_SP_MEDIUM_FAST 0x00000002 +#define JSCTL_SP_FAST 0x00000003 +#define JSCTL_ARE 0x00000004 + +/* + * The following defines are for the flags in the joystick coordinate pair 1 + * readback register. + */ +#define JSC1_Y1V_MASK 0x0000FFFF +#define JSC1_X1V_MASK 0xFFFF0000 +#define JSC1_Y1V_SHIFT 0 +#define JSC1_X1V_SHIFT 16 + +/* + * The following defines are for the flags in the joystick coordinate pair 2 + * readback register. + */ +#define JSC2_Y2V_MASK 0x0000FFFF +#define JSC2_X2V_MASK 0xFFFF0000 +#define JSC2_Y2V_SHIFT 0 +#define JSC2_X2V_SHIFT 16 + +/* + * The following defines are for the flags in the MIDI control register. + */ +#define MIDCR_TXE 0x00000001 /* Enable transmitting. */ +#define MIDCR_RXE 0x00000002 /* Enable receiving. */ +#define MIDCR_RIE 0x00000004 /* Interrupt upon tx ready. */ +#define MIDCR_TIE 0x00000008 /* Interrupt upon rx ready. */ +#define MIDCR_MLB 0x00000010 /* Enable midi loopback. */ +#define MIDCR_MRST 0x00000020 /* Reset interface. */ + +/* + * The following defines are for the flags in the MIDI status register. + */ +#define MIDSR_TBF 0x00000001 /* Tx FIFO is full. */ +#define MIDSR_RBE 0x00000002 /* Rx FIFO is empty. */ + +/* + * The following defines are for the flags in the MIDI write port register. + */ +#define MIDWP_MWD_MASK 0x000000FF +#define MIDWP_MWD_SHIFT 0 + +/* + * The following defines are for the flags in the MIDI read port register. + */ +#define MIDRP_MRD_MASK 0x000000FF +#define MIDRP_MRD_SHIFT 0 + +/* + * The following defines are for the flags in the joystick GPIO register. + */ +#define JSIO_DAX 0x00000001 +#define JSIO_DAY 0x00000002 +#define JSIO_DBX 0x00000004 +#define JSIO_DBY 0x00000008 +#define JSIO_AXOE 0x00000010 +#define JSIO_AYOE 0x00000020 +#define JSIO_BXOE 0x00000040 +#define JSIO_BYOE 0x00000080 + +/* + * The following defines are for the flags in the master async/sync serial + * port enable register. + */ +#ifndef NO_CS4612 +#define ASER_MASTER_ME 0x00000001 +#endif + +/* + * The following defines are for the flags in the configuration interface + * register. + */ +#define CFGI_CLK 0x00000001 +#define CFGI_DOUT 0x00000002 +#define CFGI_DIN_EEN 0x00000004 +#define CFGI_EELD 0x00000008 + +/* + * The following defines are for the flags in the subsystem ID and vendor ID + * register. + */ +#define SSVID_VID_MASK 0x0000FFFF +#define SSVID_SID_MASK 0xFFFF0000 +#define SSVID_VID_SHIFT 0 +#define SSVID_SID_SHIFT 16 + +/* + * The following defines are for the flags in the GPIO pin interface register. + */ +#define GPIOR_VOLDN 0x00000001 +#define GPIOR_VOLUP 0x00000002 +#define GPIOR_SI2D 0x00000004 +#define GPIOR_SI2OE 0x00000008 + +/* + * The following defines are for the flags in the extended GPIO pin direction + * register. + */ +#ifndef NO_CS4612 +#define EGPIODR_GPOE0 0x00000001 +#define EGPIODR_GPOE1 0x00000002 +#define EGPIODR_GPOE2 0x00000004 +#define EGPIODR_GPOE3 0x00000008 +#define EGPIODR_GPOE4 0x00000010 +#define EGPIODR_GPOE5 0x00000020 +#define EGPIODR_GPOE6 0x00000040 +#define EGPIODR_GPOE7 0x00000080 +#define EGPIODR_GPOE8 0x00000100 +#endif + +/* + * The following defines are for the flags in the extended GPIO pin polarity/ + * type register. + */ +#ifndef NO_CS4612 +#define EGPIOPTR_GPPT0 0x00000001 +#define EGPIOPTR_GPPT1 0x00000002 +#define EGPIOPTR_GPPT2 0x00000004 +#define EGPIOPTR_GPPT3 0x00000008 +#define EGPIOPTR_GPPT4 0x00000010 +#define EGPIOPTR_GPPT5 0x00000020 +#define EGPIOPTR_GPPT6 0x00000040 +#define EGPIOPTR_GPPT7 0x00000080 +#define EGPIOPTR_GPPT8 0x00000100 +#endif + +/* + * The following defines are for the flags in the extended GPIO pin sticky + * register. + */ +#ifndef NO_CS4612 +#define EGPIOTR_GPS0 0x00000001 +#define EGPIOTR_GPS1 0x00000002 +#define EGPIOTR_GPS2 0x00000004 +#define EGPIOTR_GPS3 0x00000008 +#define EGPIOTR_GPS4 0x00000010 +#define EGPIOTR_GPS5 0x00000020 +#define EGPIOTR_GPS6 0x00000040 +#define EGPIOTR_GPS7 0x00000080 +#define EGPIOTR_GPS8 0x00000100 +#endif + +/* + * The following defines are for the flags in the extended GPIO ping wakeup + * register. + */ +#ifndef NO_CS4612 +#define EGPIOWR_GPW0 0x00000001 +#define EGPIOWR_GPW1 0x00000002 +#define EGPIOWR_GPW2 0x00000004 +#define EGPIOWR_GPW3 0x00000008 +#define EGPIOWR_GPW4 0x00000010 +#define EGPIOWR_GPW5 0x00000020 +#define EGPIOWR_GPW6 0x00000040 +#define EGPIOWR_GPW7 0x00000080 +#define EGPIOWR_GPW8 0x00000100 +#endif + +/* + * The following defines are for the flags in the extended GPIO pin status + * register. + */ +#ifndef NO_CS4612 +#define EGPIOSR_GPS0 0x00000001 +#define EGPIOSR_GPS1 0x00000002 +#define EGPIOSR_GPS2 0x00000004 +#define EGPIOSR_GPS3 0x00000008 +#define EGPIOSR_GPS4 0x00000010 +#define EGPIOSR_GPS5 0x00000020 +#define EGPIOSR_GPS6 0x00000040 +#define EGPIOSR_GPS7 0x00000080 +#define EGPIOSR_GPS8 0x00000100 +#endif + +/* + * The following defines are for the flags in the serial port 6 configuration + * register. + */ +#ifndef NO_CS4612 +#define SERC6_ASDO2EN 0x00000001 +#endif + +/* + * The following defines are for the flags in the serial port 7 configuration + * register. + */ +#ifndef NO_CS4612 +#define SERC7_ASDI2EN 0x00000001 +#define SERC7_POSILB 0x00000002 +#define SERC7_SIPOLB 0x00000004 +#define SERC7_SOSILB 0x00000008 +#define SERC7_SISOLB 0x00000010 +#endif + +/* + * The following defines are for the flags in the serial port AC link + * configuration register. + */ +#ifndef NO_CS4612 +#define SERACC_CHIP_TYPE_MASK 0x00000001 +#define SERACC_CHIP_TYPE_1_03 0x00000000 +#define SERACC_CHIP_TYPE_2_0 0x00000001 +#define SERACC_TWO_CODECS 0x00000002 +#define SERACC_MDM 0x00000004 +#define SERACC_HSP 0x00000008 +#define SERACC_ODT 0x00000010 /* only CS4630 */ +#endif + +/* + * The following defines are for the flags in the AC97 control register 2. + */ +#ifndef NO_CS4612 +#define ACCTL2_RSTN 0x00000001 +#define ACCTL2_ESYN 0x00000002 +#define ACCTL2_VFRM 0x00000004 +#define ACCTL2_DCV 0x00000008 +#define ACCTL2_CRW 0x00000010 +#define ACCTL2_ASYN 0x00000020 +#endif + +/* + * The following defines are for the flags in the AC97 status register 2. + */ +#ifndef NO_CS4612 +#define ACSTS2_CRDY 0x00000001 +#define ACSTS2_VSTS 0x00000002 +#endif + +/* + * The following defines are for the flags in the AC97 output slot valid + * register 2. + */ +#ifndef NO_CS4612 +#define ACOSV2_SLV3 0x00000001 +#define ACOSV2_SLV4 0x00000002 +#define ACOSV2_SLV5 0x00000004 +#define ACOSV2_SLV6 0x00000008 +#define ACOSV2_SLV7 0x00000010 +#define ACOSV2_SLV8 0x00000020 +#define ACOSV2_SLV9 0x00000040 +#define ACOSV2_SLV10 0x00000080 +#define ACOSV2_SLV11 0x00000100 +#define ACOSV2_SLV12 0x00000200 +#endif + +/* + * The following defines are for the flags in the AC97 command address + * register 2. + */ +#ifndef NO_CS4612 +#define ACCAD2_CI_MASK 0x0000007F +#define ACCAD2_CI_SHIFT 0 +#endif + +/* + * The following defines are for the flags in the AC97 command data register + * 2. + */ +#ifndef NO_CS4612 +#define ACCDA2_CD_MASK 0x0000FFFF +#define ACCDA2_CD_SHIFT 0 +#endif + +/* + * The following defines are for the flags in the AC97 input slot valid + * register 2. + */ +#ifndef NO_CS4612 +#define ACISV2_ISV3 0x00000001 +#define ACISV2_ISV4 0x00000002 +#define ACISV2_ISV5 0x00000004 +#define ACISV2_ISV6 0x00000008 +#define ACISV2_ISV7 0x00000010 +#define ACISV2_ISV8 0x00000020 +#define ACISV2_ISV9 0x00000040 +#define ACISV2_ISV10 0x00000080 +#define ACISV2_ISV11 0x00000100 +#define ACISV2_ISV12 0x00000200 +#endif + +/* + * The following defines are for the flags in the AC97 status address + * register 2. + */ +#ifndef NO_CS4612 +#define ACSAD2_SI_MASK 0x0000007F +#define ACSAD2_SI_SHIFT 0 +#endif + +/* + * The following defines are for the flags in the AC97 status data register 2. + */ +#ifndef NO_CS4612 +#define ACSDA2_SD_MASK 0x0000FFFF +#define ACSDA2_SD_SHIFT 0 +#endif + +/* + * The following defines are for the flags in the I/O trap address and control + * registers (all 12). + */ +#ifndef NO_CS4612 +#define IOTAC_SA_MASK 0x0000FFFF +#define IOTAC_MSK_MASK 0x000F0000 +#define IOTAC_IODC_MASK 0x06000000 +#define IOTAC_IODC_16_BIT 0x00000000 +#define IOTAC_IODC_10_BIT 0x02000000 +#define IOTAC_IODC_12_BIT 0x04000000 +#define IOTAC_WSPI 0x08000000 +#define IOTAC_RSPI 0x10000000 +#define IOTAC_WSE 0x20000000 +#define IOTAC_WE 0x40000000 +#define IOTAC_RE 0x80000000 +#define IOTAC_SA_SHIFT 0 +#define IOTAC_MSK_SHIFT 16 +#endif + +/* + * The following defines are for the flags in the I/O trap fast read registers + * (all 8). + */ +#ifndef NO_CS4612 +#define IOTFR_D_MASK 0x0000FFFF +#define IOTFR_A_MASK 0x000F0000 +#define IOTFR_R_MASK 0x0F000000 +#define IOTFR_ALL 0x40000000 +#define IOTFR_VL 0x80000000 +#define IOTFR_D_SHIFT 0 +#define IOTFR_A_SHIFT 16 +#define IOTFR_R_SHIFT 24 +#endif + +/* + * The following defines are for the flags in the I/O trap FIFO register. + */ +#ifndef NO_CS4612 +#define IOTFIFO_BA_MASK 0x00003FFF +#define IOTFIFO_S_MASK 0x00FF0000 +#define IOTFIFO_OF 0x40000000 +#define IOTFIFO_SPIOF 0x80000000 +#define IOTFIFO_BA_SHIFT 0 +#define IOTFIFO_S_SHIFT 16 +#endif + +/* + * The following defines are for the flags in the I/O trap retry read data + * register. + */ +#ifndef NO_CS4612 +#define IOTRRD_D_MASK 0x0000FFFF +#define IOTRRD_RDV 0x80000000 +#define IOTRRD_D_SHIFT 0 +#endif + +/* + * The following defines are for the flags in the I/O trap FIFO pointer + * register. + */ +#ifndef NO_CS4612 +#define IOTFP_CA_MASK 0x00003FFF +#define IOTFP_PA_MASK 0x3FFF0000 +#define IOTFP_CA_SHIFT 0 +#define IOTFP_PA_SHIFT 16 +#endif + +/* + * The following defines are for the flags in the I/O trap control register. + */ +#ifndef NO_CS4612 +#define IOTCR_ITD 0x00000001 +#define IOTCR_HRV 0x00000002 +#define IOTCR_SRV 0x00000004 +#define IOTCR_DTI 0x00000008 +#define IOTCR_DFI 0x00000010 +#define IOTCR_DDP 0x00000020 +#define IOTCR_JTE 0x00000040 +#define IOTCR_PPE 0x00000080 +#endif + +/* + * The following defines are for the flags in the direct PCI data register. + */ +#ifndef NO_CS4612 +#define DPCID_D_MASK 0xFFFFFFFF +#define DPCID_D_SHIFT 0 +#endif + +/* + * The following defines are for the flags in the direct PCI address register. + */ +#ifndef NO_CS4612 +#define DPCIA_A_MASK 0xFFFFFFFF +#define DPCIA_A_SHIFT 0 +#endif + +/* + * The following defines are for the flags in the direct PCI command register. + */ +#ifndef NO_CS4612 +#define DPCIC_C_MASK 0x0000000F +#define DPCIC_C_IOREAD 0x00000002 +#define DPCIC_C_IOWRITE 0x00000003 +#define DPCIC_BE_MASK 0x000000F0 +#endif + +/* + * The following defines are for the flags in the PC/PCI request register. + */ +#ifndef NO_CS4612 +#define PCPCIR_RDC_MASK 0x00000007 +#define PCPCIR_C_MASK 0x00007000 +#define PCPCIR_REQ 0x00008000 +#define PCPCIR_RDC_SHIFT 0 +#define PCPCIR_C_SHIFT 12 +#endif + +/* + * The following defines are for the flags in the PC/PCI grant register. + */ +#ifndef NO_CS4612 +#define PCPCIG_GDC_MASK 0x00000007 +#define PCPCIG_VL 0x00008000 +#define PCPCIG_GDC_SHIFT 0 +#endif + +/* + * The following defines are for the flags in the PC/PCI master enable + * register. + */ +#ifndef NO_CS4612 +#define PCPCIEN_EN 0x00000001 +#endif + +/* + * The following defines are for the flags in the extended PCI power + * management control register. + */ +#ifndef NO_CS4612 +#define EPCIPMC_GWU 0x00000001 +#define EPCIPMC_FSPC 0x00000002 +#endif + +/* + * The following defines are for the flags in the SP control register. + */ +#define SPCR_RUN 0x00000001 +#define SPCR_STPFR 0x00000002 +#define SPCR_RUNFR 0x00000004 +#define SPCR_TICK 0x00000008 +#define SPCR_DRQEN 0x00000020 +#define SPCR_RSTSP 0x00000040 +#define SPCR_OREN 0x00000080 +#ifndef NO_CS4612 +#define SPCR_PCIINT 0x00000100 +#define SPCR_OINTD 0x00000200 +#define SPCR_CRE 0x00008000 +#endif + +/* + * The following defines are for the flags in the debug index register. + */ +#define DREG_REGID_MASK 0x0000007F +#define DREG_DEBUG 0x00000080 +#define DREG_RGBK_MASK 0x00000700 +#define DREG_TRAP 0x00000800 +#if !defined(NO_CS4612) +#if !defined(NO_CS4615) +#define DREG_TRAPX 0x00001000 +#endif +#endif +#define DREG_REGID_SHIFT 0 +#define DREG_RGBK_SHIFT 8 +#define DREG_RGBK_REGID_MASK 0x0000077F +#define DREG_REGID_R0 0x00000010 +#define DREG_REGID_R1 0x00000011 +#define DREG_REGID_R2 0x00000012 +#define DREG_REGID_R3 0x00000013 +#define DREG_REGID_R4 0x00000014 +#define DREG_REGID_R5 0x00000015 +#define DREG_REGID_R6 0x00000016 +#define DREG_REGID_R7 0x00000017 +#define DREG_REGID_R8 0x00000018 +#define DREG_REGID_R9 0x00000019 +#define DREG_REGID_RA 0x0000001A +#define DREG_REGID_RB 0x0000001B +#define DREG_REGID_RC 0x0000001C +#define DREG_REGID_RD 0x0000001D +#define DREG_REGID_RE 0x0000001E +#define DREG_REGID_RF 0x0000001F +#define DREG_REGID_RA_BUS_LOW 0x00000020 +#define DREG_REGID_RA_BUS_HIGH 0x00000038 +#define DREG_REGID_YBUS_LOW 0x00000050 +#define DREG_REGID_YBUS_HIGH 0x00000058 +#define DREG_REGID_TRAP_0 0x00000100 +#define DREG_REGID_TRAP_1 0x00000101 +#define DREG_REGID_TRAP_2 0x00000102 +#define DREG_REGID_TRAP_3 0x00000103 +#define DREG_REGID_TRAP_4 0x00000104 +#define DREG_REGID_TRAP_5 0x00000105 +#define DREG_REGID_TRAP_6 0x00000106 +#define DREG_REGID_TRAP_7 0x00000107 +#define DREG_REGID_INDIRECT_ADDRESS 0x0000010E +#define DREG_REGID_TOP_OF_STACK 0x0000010F +#if !defined(NO_CS4612) +#if !defined(NO_CS4615) +#define DREG_REGID_TRAP_8 0x00000110 +#define DREG_REGID_TRAP_9 0x00000111 +#define DREG_REGID_TRAP_10 0x00000112 +#define DREG_REGID_TRAP_11 0x00000113 +#define DREG_REGID_TRAP_12 0x00000114 +#define DREG_REGID_TRAP_13 0x00000115 +#define DREG_REGID_TRAP_14 0x00000116 +#define DREG_REGID_TRAP_15 0x00000117 +#define DREG_REGID_TRAP_16 0x00000118 +#define DREG_REGID_TRAP_17 0x00000119 +#define DREG_REGID_TRAP_18 0x0000011A +#define DREG_REGID_TRAP_19 0x0000011B +#define DREG_REGID_TRAP_20 0x0000011C +#define DREG_REGID_TRAP_21 0x0000011D +#define DREG_REGID_TRAP_22 0x0000011E +#define DREG_REGID_TRAP_23 0x0000011F +#endif +#endif +#define DREG_REGID_RSA0_LOW 0x00000200 +#define DREG_REGID_RSA0_HIGH 0x00000201 +#define DREG_REGID_RSA1_LOW 0x00000202 +#define DREG_REGID_RSA1_HIGH 0x00000203 +#define DREG_REGID_RSA2 0x00000204 +#define DREG_REGID_RSA3 0x00000205 +#define DREG_REGID_RSI0_LOW 0x00000206 +#define DREG_REGID_RSI0_HIGH 0x00000207 +#define DREG_REGID_RSI1 0x00000208 +#define DREG_REGID_RSI2 0x00000209 +#define DREG_REGID_SAGUSTATUS 0x0000020A +#define DREG_REGID_RSCONFIG01_LOW 0x0000020B +#define DREG_REGID_RSCONFIG01_HIGH 0x0000020C +#define DREG_REGID_RSCONFIG23_LOW 0x0000020D +#define DREG_REGID_RSCONFIG23_HIGH 0x0000020E +#define DREG_REGID_RSDMA01E 0x0000020F +#define DREG_REGID_RSDMA23E 0x00000210 +#define DREG_REGID_RSD0_LOW 0x00000211 +#define DREG_REGID_RSD0_HIGH 0x00000212 +#define DREG_REGID_RSD1_LOW 0x00000213 +#define DREG_REGID_RSD1_HIGH 0x00000214 +#define DREG_REGID_RSD2_LOW 0x00000215 +#define DREG_REGID_RSD2_HIGH 0x00000216 +#define DREG_REGID_RSD3_LOW 0x00000217 +#define DREG_REGID_RSD3_HIGH 0x00000218 +#define DREG_REGID_SRAR_HIGH 0x0000021A +#define DREG_REGID_SRAR_LOW 0x0000021B +#define DREG_REGID_DMA_STATE 0x0000021C +#define DREG_REGID_CURRENT_DMA_STREAM 0x0000021D +#define DREG_REGID_NEXT_DMA_STREAM 0x0000021E +#define DREG_REGID_CPU_STATUS 0x00000300 +#define DREG_REGID_MAC_MODE 0x00000301 +#define DREG_REGID_STACK_AND_REPEAT 0x00000302 +#define DREG_REGID_INDEX0 0x00000304 +#define DREG_REGID_INDEX1 0x00000305 +#define DREG_REGID_DMA_STATE_0_3 0x00000400 +#define DREG_REGID_DMA_STATE_4_7 0x00000404 +#define DREG_REGID_DMA_STATE_8_11 0x00000408 +#define DREG_REGID_DMA_STATE_12_15 0x0000040C +#define DREG_REGID_DMA_STATE_16_19 0x00000410 +#define DREG_REGID_DMA_STATE_20_23 0x00000414 +#define DREG_REGID_DMA_STATE_24_27 0x00000418 +#define DREG_REGID_DMA_STATE_28_31 0x0000041C +#define DREG_REGID_DMA_STATE_32_35 0x00000420 +#define DREG_REGID_DMA_STATE_36_39 0x00000424 +#define DREG_REGID_DMA_STATE_40_43 0x00000428 +#define DREG_REGID_DMA_STATE_44_47 0x0000042C +#define DREG_REGID_DMA_STATE_48_51 0x00000430 +#define DREG_REGID_DMA_STATE_52_55 0x00000434 +#define DREG_REGID_DMA_STATE_56_59 0x00000438 +#define DREG_REGID_DMA_STATE_60_63 0x0000043C +#define DREG_REGID_DMA_STATE_64_67 0x00000440 +#define DREG_REGID_DMA_STATE_68_71 0x00000444 +#define DREG_REGID_DMA_STATE_72_75 0x00000448 +#define DREG_REGID_DMA_STATE_76_79 0x0000044C +#define DREG_REGID_DMA_STATE_80_83 0x00000450 +#define DREG_REGID_DMA_STATE_84_87 0x00000454 +#define DREG_REGID_DMA_STATE_88_91 0x00000458 +#define DREG_REGID_DMA_STATE_92_95 0x0000045C +#define DREG_REGID_TRAP_SELECT 0x00000500 +#define DREG_REGID_TRAP_WRITE_0 0x00000500 +#define DREG_REGID_TRAP_WRITE_1 0x00000501 +#define DREG_REGID_TRAP_WRITE_2 0x00000502 +#define DREG_REGID_TRAP_WRITE_3 0x00000503 +#define DREG_REGID_TRAP_WRITE_4 0x00000504 +#define DREG_REGID_TRAP_WRITE_5 0x00000505 +#define DREG_REGID_TRAP_WRITE_6 0x00000506 +#define DREG_REGID_TRAP_WRITE_7 0x00000507 +#if !defined(NO_CS4612) +#if !defined(NO_CS4615) +#define DREG_REGID_TRAP_WRITE_8 0x00000510 +#define DREG_REGID_TRAP_WRITE_9 0x00000511 +#define DREG_REGID_TRAP_WRITE_10 0x00000512 +#define DREG_REGID_TRAP_WRITE_11 0x00000513 +#define DREG_REGID_TRAP_WRITE_12 0x00000514 +#define DREG_REGID_TRAP_WRITE_13 0x00000515 +#define DREG_REGID_TRAP_WRITE_14 0x00000516 +#define DREG_REGID_TRAP_WRITE_15 0x00000517 +#define DREG_REGID_TRAP_WRITE_16 0x00000518 +#define DREG_REGID_TRAP_WRITE_17 0x00000519 +#define DREG_REGID_TRAP_WRITE_18 0x0000051A +#define DREG_REGID_TRAP_WRITE_19 0x0000051B +#define DREG_REGID_TRAP_WRITE_20 0x0000051C +#define DREG_REGID_TRAP_WRITE_21 0x0000051D +#define DREG_REGID_TRAP_WRITE_22 0x0000051E +#define DREG_REGID_TRAP_WRITE_23 0x0000051F +#endif +#endif +#define DREG_REGID_MAC0_ACC0_LOW 0x00000600 +#define DREG_REGID_MAC0_ACC1_LOW 0x00000601 +#define DREG_REGID_MAC0_ACC2_LOW 0x00000602 +#define DREG_REGID_MAC0_ACC3_LOW 0x00000603 +#define DREG_REGID_MAC1_ACC0_LOW 0x00000604 +#define DREG_REGID_MAC1_ACC1_LOW 0x00000605 +#define DREG_REGID_MAC1_ACC2_LOW 0x00000606 +#define DREG_REGID_MAC1_ACC3_LOW 0x00000607 +#define DREG_REGID_MAC0_ACC0_MID 0x00000608 +#define DREG_REGID_MAC0_ACC1_MID 0x00000609 +#define DREG_REGID_MAC0_ACC2_MID 0x0000060A +#define DREG_REGID_MAC0_ACC3_MID 0x0000060B +#define DREG_REGID_MAC1_ACC0_MID 0x0000060C +#define DREG_REGID_MAC1_ACC1_MID 0x0000060D +#define DREG_REGID_MAC1_ACC2_MID 0x0000060E +#define DREG_REGID_MAC1_ACC3_MID 0x0000060F +#define DREG_REGID_MAC0_ACC0_HIGH 0x00000610 +#define DREG_REGID_MAC0_ACC1_HIGH 0x00000611 +#define DREG_REGID_MAC0_ACC2_HIGH 0x00000612 +#define DREG_REGID_MAC0_ACC3_HIGH 0x00000613 +#define DREG_REGID_MAC1_ACC0_HIGH 0x00000614 +#define DREG_REGID_MAC1_ACC1_HIGH 0x00000615 +#define DREG_REGID_MAC1_ACC2_HIGH 0x00000616 +#define DREG_REGID_MAC1_ACC3_HIGH 0x00000617 +#define DREG_REGID_RSHOUT_LOW 0x00000620 +#define DREG_REGID_RSHOUT_MID 0x00000628 +#define DREG_REGID_RSHOUT_HIGH 0x00000630 + +/* + * The following defines are for the flags in the DMA stream requestor write + */ +#define DSRWP_DSR_MASK 0x0000000F +#define DSRWP_DSR_BG_RQ 0x00000001 +#define DSRWP_DSR_PRIORITY_MASK 0x00000006 +#define DSRWP_DSR_PRIORITY_0 0x00000000 +#define DSRWP_DSR_PRIORITY_1 0x00000002 +#define DSRWP_DSR_PRIORITY_2 0x00000004 +#define DSRWP_DSR_PRIORITY_3 0x00000006 +#define DSRWP_DSR_RQ_PENDING 0x00000008 + +/* + * The following defines are for the flags in the trap write port register. + */ +#define TWPR_TW_MASK 0x0000FFFF +#define TWPR_TW_SHIFT 0 + +/* + * The following defines are for the flags in the stack pointer write + * register. + */ +#define SPWR_STKP_MASK 0x0000000F +#define SPWR_STKP_SHIFT 0 + +/* + * The following defines are for the flags in the SP interrupt register. + */ +#define SPIR_FRI 0x00000001 +#define SPIR_DOI 0x00000002 +#define SPIR_GPI2 0x00000004 +#define SPIR_GPI3 0x00000008 +#define SPIR_IP0 0x00000010 +#define SPIR_IP1 0x00000020 +#define SPIR_IP2 0x00000040 +#define SPIR_IP3 0x00000080 + +/* + * The following defines are for the flags in the functional group 1 register. + */ +#define FGR1_F1S_MASK 0x0000FFFF +#define FGR1_F1S_SHIFT 0 + +/* + * The following defines are for the flags in the SP clock status register. + */ +#define SPCS_FRI 0x00000001 +#define SPCS_DOI 0x00000002 +#define SPCS_GPI2 0x00000004 +#define SPCS_GPI3 0x00000008 +#define SPCS_IP0 0x00000010 +#define SPCS_IP1 0x00000020 +#define SPCS_IP2 0x00000040 +#define SPCS_IP3 0x00000080 +#define SPCS_SPRUN 0x00000100 +#define SPCS_SLEEP 0x00000200 +#define SPCS_FG 0x00000400 +#define SPCS_ORUN 0x00000800 +#define SPCS_IRQ 0x00001000 +#define SPCS_FGN_MASK 0x0000E000 +#define SPCS_FGN_SHIFT 13 + +/* + * The following defines are for the flags in the SP DMA requestor status + * register. + */ +#define SDSR_DCS_MASK 0x000000FF +#define SDSR_DCS_SHIFT 0 +#define SDSR_DCS_NONE 0x00000007 + +/* + * The following defines are for the flags in the frame timer register. + */ +#define FRMT_FTV_MASK 0x0000FFFF +#define FRMT_FTV_SHIFT 0 + +/* + * The following defines are for the flags in the frame timer current count + * register. + */ +#define FRCC_FCC_MASK 0x0000FFFF +#define FRCC_FCC_SHIFT 0 + +/* + * The following defines are for the flags in the frame timer save count + * register. + */ +#define FRSC_FCS_MASK 0x0000FFFF +#define FRSC_FCS_SHIFT 0 + +/* + * The following define the various flags stored in the scatter/gather + * descriptors. + */ +#define DMA_SG_NEXT_ENTRY_MASK 0x00000FF8 +#define DMA_SG_SAMPLE_END_MASK 0x0FFF0000 +#define DMA_SG_SAMPLE_END_FLAG 0x10000000 +#define DMA_SG_LOOP_END_FLAG 0x20000000 +#define DMA_SG_SIGNAL_END_FLAG 0x40000000 +#define DMA_SG_SIGNAL_PAGE_FLAG 0x80000000 +#define DMA_SG_NEXT_ENTRY_SHIFT 3 +#define DMA_SG_SAMPLE_END_SHIFT 16 + +/* + * The following define the offsets of the fields within the on-chip generic + * DMA requestor. + */ +#define DMA_RQ_CONTROL1 0x00000000 +#define DMA_RQ_CONTROL2 0x00000004 +#define DMA_RQ_SOURCE_ADDR 0x00000008 +#define DMA_RQ_DESTINATION_ADDR 0x0000000C +#define DMA_RQ_NEXT_PAGE_ADDR 0x00000010 +#define DMA_RQ_NEXT_PAGE_SGDESC 0x00000014 +#define DMA_RQ_LOOP_START_ADDR 0x00000018 +#define DMA_RQ_POST_LOOP_ADDR 0x0000001C +#define DMA_RQ_PAGE_MAP_ADDR 0x00000020 + +/* + * The following defines are for the flags in the first control word of the + * on-chip generic DMA requestor. + */ +#define DMA_RQ_C1_COUNT_MASK 0x000003FF +#define DMA_RQ_C1_DESTINATION_SCATTER 0x00001000 +#define DMA_RQ_C1_SOURCE_GATHER 0x00002000 +#define DMA_RQ_C1_DONE_FLAG 0x00004000 +#define DMA_RQ_C1_OPTIMIZE_STATE 0x00008000 +#define DMA_RQ_C1_SAMPLE_END_STATE_MASK 0x00030000 +#define DMA_RQ_C1_FULL_PAGE 0x00000000 +#define DMA_RQ_C1_BEFORE_SAMPLE_END 0x00010000 +#define DMA_RQ_C1_PAGE_MAP_ERROR 0x00020000 +#define DMA_RQ_C1_AT_SAMPLE_END 0x00030000 +#define DMA_RQ_C1_LOOP_END_STATE_MASK 0x000C0000 +#define DMA_RQ_C1_NOT_LOOP_END 0x00000000 +#define DMA_RQ_C1_BEFORE_LOOP_END 0x00040000 +#define DMA_RQ_C1_2PAGE_LOOP_BEGIN 0x00080000 +#define DMA_RQ_C1_LOOP_BEGIN 0x000C0000 +#define DMA_RQ_C1_PAGE_MAP_MASK 0x00300000 +#define DMA_RQ_C1_PM_NONE_PENDING 0x00000000 +#define DMA_RQ_C1_PM_NEXT_PENDING 0x00100000 +#define DMA_RQ_C1_PM_RESERVED 0x00200000 +#define DMA_RQ_C1_PM_LOOP_NEXT_PENDING 0x00300000 +#define DMA_RQ_C1_WRITEBACK_DEST_FLAG 0x00400000 +#define DMA_RQ_C1_WRITEBACK_SRC_FLAG 0x00800000 +#define DMA_RQ_C1_DEST_SIZE_MASK 0x07000000 +#define DMA_RQ_C1_DEST_LINEAR 0x00000000 +#define DMA_RQ_C1_DEST_MOD16 0x01000000 +#define DMA_RQ_C1_DEST_MOD32 0x02000000 +#define DMA_RQ_C1_DEST_MOD64 0x03000000 +#define DMA_RQ_C1_DEST_MOD128 0x04000000 +#define DMA_RQ_C1_DEST_MOD256 0x05000000 +#define DMA_RQ_C1_DEST_MOD512 0x06000000 +#define DMA_RQ_C1_DEST_MOD1024 0x07000000 +#define DMA_RQ_C1_DEST_ON_HOST 0x08000000 +#define DMA_RQ_C1_SOURCE_SIZE_MASK 0x70000000 +#define DMA_RQ_C1_SOURCE_LINEAR 0x00000000 +#define DMA_RQ_C1_SOURCE_MOD16 0x10000000 +#define DMA_RQ_C1_SOURCE_MOD32 0x20000000 +#define DMA_RQ_C1_SOURCE_MOD64 0x30000000 +#define DMA_RQ_C1_SOURCE_MOD128 0x40000000 +#define DMA_RQ_C1_SOURCE_MOD256 0x50000000 +#define DMA_RQ_C1_SOURCE_MOD512 0x60000000 +#define DMA_RQ_C1_SOURCE_MOD1024 0x70000000 +#define DMA_RQ_C1_SOURCE_ON_HOST 0x80000000 +#define DMA_RQ_C1_COUNT_SHIFT 0 + +/* + * The following defines are for the flags in the second control word of the + * on-chip generic DMA requestor. + */ +#define DMA_RQ_C2_VIRTUAL_CHANNEL_MASK 0x0000003F +#define DMA_RQ_C2_VIRTUAL_SIGNAL_MASK 0x00000300 +#define DMA_RQ_C2_NO_VIRTUAL_SIGNAL 0x00000000 +#define DMA_RQ_C2_SIGNAL_EVERY_DMA 0x00000100 +#define DMA_RQ_C2_SIGNAL_SOURCE_PINGPONG 0x00000200 +#define DMA_RQ_C2_SIGNAL_DEST_PINGPONG 0x00000300 +#define DMA_RQ_C2_AUDIO_CONVERT_MASK 0x0000F000 +#define DMA_RQ_C2_AC_NONE 0x00000000 +#define DMA_RQ_C2_AC_8_TO_16_BIT 0x00001000 +#define DMA_RQ_C2_AC_MONO_TO_STEREO 0x00002000 +#define DMA_RQ_C2_AC_ENDIAN_CONVERT 0x00004000 +#define DMA_RQ_C2_AC_SIGNED_CONVERT 0x00008000 +#define DMA_RQ_C2_LOOP_END_MASK 0x0FFF0000 +#define DMA_RQ_C2_LOOP_MASK 0x30000000 +#define DMA_RQ_C2_NO_LOOP 0x00000000 +#define DMA_RQ_C2_ONE_PAGE_LOOP 0x10000000 +#define DMA_RQ_C2_TWO_PAGE_LOOP 0x20000000 +#define DMA_RQ_C2_MULTI_PAGE_LOOP 0x30000000 +#define DMA_RQ_C2_SIGNAL_LOOP_BACK 0x40000000 +#define DMA_RQ_C2_SIGNAL_POST_BEGIN_PAGE 0x80000000 +#define DMA_RQ_C2_VIRTUAL_CHANNEL_SHIFT 0 +#define DMA_RQ_C2_LOOP_END_SHIFT 16 + +/* + * The following defines are for the flags in the source and destination words + * of the on-chip generic DMA requestor. + */ +#define DMA_RQ_SD_ADDRESS_MASK 0x0000FFFF +#define DMA_RQ_SD_MEMORY_ID_MASK 0x000F0000 +#define DMA_RQ_SD_SP_PARAM_ADDR 0x00000000 +#define DMA_RQ_SD_SP_SAMPLE_ADDR 0x00010000 +#define DMA_RQ_SD_SP_PROGRAM_ADDR 0x00020000 +#define DMA_RQ_SD_SP_DEBUG_ADDR 0x00030000 +#define DMA_RQ_SD_OMNIMEM_ADDR 0x000E0000 +#define DMA_RQ_SD_END_FLAG 0x40000000 +#define DMA_RQ_SD_ERROR_FLAG 0x80000000 +#define DMA_RQ_SD_ADDRESS_SHIFT 0 + +/* + * The following defines are for the flags in the page map address word of the + * on-chip generic DMA requestor. + */ +#define DMA_RQ_PMA_LOOP_THIRD_PAGE_ENTRY_MASK 0x00000FF8 +#define DMA_RQ_PMA_PAGE_TABLE_MASK 0xFFFFF000 +#define DMA_RQ_PMA_LOOP_THIRD_PAGE_ENTRY_SHIFT 3 +#define DMA_RQ_PMA_PAGE_TABLE_SHIFT 12 + +#define BA1_VARIDEC_BUF_1 0x000 + +#define BA1_PDTC 0x0c0 /* BA1_PLAY_DMA_TRANSACTION_COUNT_REG */ +#define BA1_PFIE 0x0c4 /* BA1_PLAY_FORMAT_&_INTERRUPT_ENABLE_REG */ +#define BA1_PBA 0x0c8 /* BA1_PLAY_BUFFER_ADDRESS */ +#define BA1_PVOL 0x0f8 /* BA1_PLAY_VOLUME_REG */ +#define BA1_PSRC 0x288 /* BA1_PLAY_SAMPLE_RATE_CORRECTION_REG */ +#define BA1_PCTL 0x2a4 /* BA1_PLAY_CONTROL_REG */ +#define BA1_PPI 0x2b4 /* BA1_PLAY_PHASE_INCREMENT_REG */ + +#define BA1_CCTL 0x064 /* BA1_CAPTURE_CONTROL_REG */ +#define BA1_CIE 0x104 /* BA1_CAPTURE_INTERRUPT_ENABLE_REG */ +#define BA1_CBA 0x10c /* BA1_CAPTURE_BUFFER_ADDRESS */ +#define BA1_CSRC 0x2c8 /* BA1_CAPTURE_SAMPLE_RATE_CORRECTION_REG */ +#define BA1_CCI 0x2d8 /* BA1_CAPTURE_COEFFICIENT_INCREMENT_REG */ +#define BA1_CD 0x2e0 /* BA1_CAPTURE_DELAY_REG */ +#define BA1_CPI 0x2f4 /* BA1_CAPTURE_PHASE_INCREMENT_REG */ +#define BA1_CVOL 0x2f8 /* BA1_CAPTURE_VOLUME_REG */ + +#define BA1_CFG1 0x134 /* BA1_CAPTURE_FRAME_GROUP_1_REG */ +#define BA1_CFG2 0x138 /* BA1_CAPTURE_FRAME_GROUP_2_REG */ +#define BA1_CCST 0x13c /* BA1_CAPTURE_CONSTANT_REG */ +#define BA1_CSPB 0x340 /* BA1_CAPTURE_SPB_ADDRESS */ + +/* + * + */ + +#define CS46XX_MODE_OUTPUT (1<<0) /* MIDI UART - output */ +#define CS46XX_MODE_INPUT (1<<1) /* MIDI UART - input */ + +/* + * + */ + +#define SAVE_REG_MAX 0x10 +#define POWER_DOWN_ALL 0x7f0f + +/* maxinum number of AC97 codecs connected, AC97 2.0 defined 4 */ +#define MAX_NR_AC97 4 +#define CS46XX_PRIMARY_CODEC_INDEX 0 +#define CS46XX_SECONDARY_CODEC_INDEX 1 +#define CS46XX_SECONDARY_CODEC_OFFSET 0x80 +#define CS46XX_DSP_CAPTURE_CHANNEL 1 + +/* capture */ +#define CS46XX_DSP_CAPTURE_CHANNEL 1 + +/* mixer */ +#define CS46XX_MIXER_SPDIF_INPUT_ELEMENT 1 +#define CS46XX_MIXER_SPDIF_OUTPUT_ELEMENT 2 + + +struct snd_cs46xx_pcm { + struct snd_dma_buffer hw_buf; + + unsigned int ctl; + unsigned int shift; /* Shift count to trasform frames in bytes */ + struct snd_pcm_indirect pcm_rec; + struct snd_pcm_substream *substream; + + struct dsp_pcm_channel_descriptor * pcm_channel; + + int pcm_channel_id; /* Fron Rear, Center Lfe ... */ +}; + +struct snd_cs46xx_region { + char name[24]; + unsigned long base; + void __iomem *remap_addr; + unsigned long size; + struct resource *resource; +}; + +struct snd_cs46xx { + int irq; + unsigned long ba0_addr; + unsigned long ba1_addr; + union { + struct { + struct snd_cs46xx_region ba0; + struct snd_cs46xx_region data0; + struct snd_cs46xx_region data1; + struct snd_cs46xx_region pmem; + struct snd_cs46xx_region reg; + } name; + struct snd_cs46xx_region idx[5]; + } region; + + unsigned int mode; + + struct { + struct snd_dma_buffer hw_buf; + + unsigned int ctl; + unsigned int shift; /* Shift count to trasform frames in bytes */ + struct snd_pcm_indirect pcm_rec; + struct snd_pcm_substream *substream; + } capt; + + + int nr_ac97_codecs; + struct snd_ac97_bus *ac97_bus; + struct snd_ac97 *ac97[MAX_NR_AC97]; + + struct pci_dev *pci; + struct snd_card *card; + struct snd_pcm *pcm; + + struct snd_rawmidi *rmidi; + struct snd_rawmidi_substream *midi_input; + struct snd_rawmidi_substream *midi_output; + + spinlock_t reg_lock; + unsigned int midcr; + unsigned int uartm; + + int amplifier; + void (*amplifier_ctrl)(struct snd_cs46xx *, int); + void (*active_ctrl)(struct snd_cs46xx *, int); + void (*mixer_init)(struct snd_cs46xx *); + + int acpi_port; + struct snd_kcontrol *eapd_switch; /* for amplifier hack */ + int accept_valid; /* accept mmap valid (for OSS) */ + int in_suspend; + + struct gameport *gameport; + +#ifdef CONFIG_SND_CS46XX_NEW_DSP + struct mutex spos_mutex; + + struct dsp_spos_instance * dsp_spos_instance; + + struct snd_pcm *pcm_rear; + struct snd_pcm *pcm_center_lfe; + struct snd_pcm *pcm_iec958; +#else /* for compatibility */ + struct snd_cs46xx_pcm *playback_pcm; + unsigned int play_ctl; +#endif + +#ifdef CONFIG_PM + u32 *saved_regs; +#endif +}; + +int snd_cs46xx_create(struct snd_card *card, + struct pci_dev *pci, + int external_amp, int thinkpad, + struct snd_cs46xx **rcodec); +extern const struct dev_pm_ops snd_cs46xx_pm; + +int snd_cs46xx_pcm(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm); +int snd_cs46xx_pcm_rear(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm); +int snd_cs46xx_pcm_iec958(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm); +int snd_cs46xx_pcm_center_lfe(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm); +int snd_cs46xx_mixer(struct snd_cs46xx *chip, int spdif_device); +int snd_cs46xx_midi(struct snd_cs46xx *chip, int device, struct snd_rawmidi **rmidi); +int snd_cs46xx_start_dsp(struct snd_cs46xx *chip); +int snd_cs46xx_gameport(struct snd_cs46xx *chip); + +#endif /* __SOUND_CS46XX_H */ diff --git a/sound/pci/cs46xx/cs46xx_dsp_scb_types.h b/sound/pci/cs46xx/cs46xx_dsp_scb_types.h new file mode 100644 index 0000000..080857a --- /dev/null +++ b/sound/pci/cs46xx/cs46xx_dsp_scb_types.h @@ -0,0 +1,1213 @@ +/* + * The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards + * Copyright (c) by Jaroslav Kysela <perex@perex.cz> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * NOTE: comments are copy/paste from cwcemb80.lst + * provided by Tom Woller at Cirrus (my only + * documentation about the SP OS running inside + * the DSP) + */ + +#ifndef __CS46XX_DSP_SCB_TYPES_H__ +#define __CS46XX_DSP_SCB_TYPES_H__ + +#include <asm/byteorder.h> + +#ifndef ___DSP_DUAL_16BIT_ALLOC +#if defined(__LITTLE_ENDIAN) +#define ___DSP_DUAL_16BIT_ALLOC(a,b) u16 a; u16 b; +#elif defined(__BIG_ENDIAN) +#define ___DSP_DUAL_16BIT_ALLOC(a,b) u16 b; u16 a; +#else +#error Not __LITTLE_ENDIAN and not __BIG_ENDIAN, then what ??? +#endif +#endif + +/* This structs are used internally by the SP */ + +struct dsp_basic_dma_req { + /* DMA Requestor Word 0 (DCW) fields: + + 31 [30-28]27 [26:24] 23 22 21 20 [19:18] [17:16] 15 14 13 12 11 10 9 8 7 6 [5:0] + _______________________________________________________________________________________ + |S| SBT |D| DBT |wb|wb| | | LS | SS |Opt|Do|SSG|DSG| | | | | | | Dword | + |H|_____ |H|_________|S_|D |__|__|______|_______|___|ne|__ |__ |__|__|_|_|_|_|_Count -1| + */ + u32 dcw; /* DMA Control Word */ + u32 dmw; /* DMA Mode Word */ + u32 saw; /* Source Address Word */ + u32 daw; /* Destination Address Word */ +}; + +struct dsp_scatter_gather_ext { + u32 npaw; /* Next-Page Address Word */ + + /* DMA Requestor Word 5 (NPCW) fields: + + 31-30 29 28 [27:16] [15:12] [11:3] [2:0] + _________________________________________________________________________________________ + |SV |LE|SE| Sample-end byte offset | | Page-map entry offset for next | | + |page|__|__| ___________________________|_________|__page, if !sample-end___________|____| + */ + u32 npcw; /* Next-Page Control Word */ + u32 lbaw; /* Loop-Begin Address Word */ + u32 nplbaw; /* Next-Page after Loop-Begin Address Word */ + u32 sgaw; /* Scatter/Gather Address Word */ +}; + +struct dsp_volume_control { + ___DSP_DUAL_16BIT_ALLOC( + rightTarg, /* Target volume for left & right channels */ + leftTarg + ) + ___DSP_DUAL_16BIT_ALLOC( + rightVol, /* Current left & right channel volumes */ + leftVol + ) +}; + +/* Generic stream control block (SCB) structure definition */ +struct dsp_generic_scb { + /* For streaming I/O, the DSP should never alter any words in the DMA + requestor or the scatter/gather extension. Only ad hoc DMA request + streams are free to alter the requestor (currently only occur in the + DOS-based MIDI controller and in debugger-inserted code). + + If an SCB does not have any associated DMA requestor, these 9 ints + may be freed for use by other tasks, but the pointer to the SCB must + still be such that the insOrd:nextSCB appear at offset 9 from the + SCB pointer. + + Basic (non scatter/gather) DMA requestor (4 ints) + */ + + /* Initialized by the host, only modified by DMA + R/O for the DSP task */ + struct dsp_basic_dma_req basic_req; /* Optional */ + + /* Scatter/gather DMA requestor extension (5 ints) + Initialized by the host, only modified by DMA + DSP task never needs to even read these. + */ + struct dsp_scatter_gather_ext sg_ext; /* Optional */ + + /* Sublist pointer & next stream control block (SCB) link. + Initialized & modified by the host R/O for the DSP task + */ + ___DSP_DUAL_16BIT_ALLOC( + next_scb, /* REQUIRED */ + sub_list_ptr /* REQUIRED */ + ) + + /* Pointer to this tasks parameter block & stream function pointer + Initialized by the host R/O for the DSP task */ + ___DSP_DUAL_16BIT_ALLOC( + entry_point, /* REQUIRED */ + this_spb /* REQUIRED */ + ) + + /* rsConfig register for stream buffer (rsDMA reg. + is loaded from basicReq.daw for incoming streams, or + basicReq.saw, for outgoing streams) + + 31 30 29 [28:24] [23:16] 15 14 13 12 11 10 9 8 7 6 5 4 [3:0] + ______________________________________________________________________________ + |DMA |D|maxDMAsize| streamNum|dir|p| | | | | | |ds |shr 1|rev Cy | mod | + |prio |_|__________|__________|___|_|__|__|__|__|_|_|___|_____|_______|_______| + 31 30 29 [28:24] [23:16] 15 14 13 12 11 10 9 8 7 6 5 4 [3:0] + + + Initialized by the host R/O for the DSP task + */ + u32 strm_rs_config; /* REQUIRED */ + // + /* On mixer input streams: indicates mixer input stream configuration + On Tees, this is copied from the stream being snooped + + Stream sample pointer & MAC-unit mode for this stream + + Initialized by the host Updated by the DSP task + */ + u32 strm_buf_ptr; /* REQUIRED */ + + /* On mixer input streams: points to next mixer input and is updated by the + mixer subroutine in the "parent" DSP task + (least-significant 16 bits are preserved, unused) + + On Tees, the pointer is copied from the stream being snooped on + initialization, and, subsequently, it is copied into the + stream being snooped. + + On wavetable/3D voices: the strmBufPtr will use all 32 bits to allow for + fractional phase accumulation + + Fractional increment per output sample in the input sample buffer + + (Not used on mixer input streams & redefined on Tees) + On wavetable/3D voices: this 32-bit word specifies the integer.fractional + increment per output sample. + */ + u32 strmPhiIncr; + + + /* Standard stereo volume control + Initialized by the host (host updates target volumes) + + Current volumes update by the DSP task + On mixer input streams: required & updated by the mixer subroutine in the + "parent" DSP task + + On Tees, both current & target volumes are copied up on initialization, + and, subsequently, the target volume is copied up while the current + volume is copied down. + + These two 32-bit words are redefined for wavetable & 3-D voices. + */ + struct dsp_volume_control vol_ctrl_t; /* Optional */ +}; + + +struct dsp_spos_control_block { + /* WARNING: Certain items in this structure are modified by the host + Any dword that can be modified by the host, must not be + modified by the SP as the host can only do atomic dword + writes, and to do otherwise, even a read modify write, + may lead to corrupted data on the SP. + + This rule does not apply to one off boot time initialisation prior to starting the SP + */ + + + ___DSP_DUAL_16BIT_ALLOC( + /* First element on the Hyper forground task tree */ + hfg_tree_root_ptr, /* HOST */ + /* First 3 dwords are written by the host and read-only on the DSP */ + hfg_stack_base /* HOST */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + /* Point to this data structure to enable easy access */ + spos_cb_ptr, /* SP */ + prev_task_tree_ptr /* SP && HOST */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + /* Currently Unused */ + xxinterval_timer_period, + /* Enable extension of SPOS data structure */ + HFGSPB_ptr + ) + + + ___DSP_DUAL_16BIT_ALLOC( + xxnum_HFG_ticks_thisInterval, + /* Modified by the DSP */ + xxnum_tntervals + ) + + + /* Set by DSP upon encountering a trap (breakpoint) or a spurious + interrupt. The host must clear this dword after reading it + upon receiving spInt1. */ + ___DSP_DUAL_16BIT_ALLOC( + spurious_int_flag, /* (Host & SP) Nature of the spurious interrupt */ + trap_flag /* (Host & SP) Nature of detected Trap */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + unused2, + invalid_IP_flag /* (Host & SP ) Indicate detection of invalid instruction pointer */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + /* pointer to forground task tree header for use in next task search */ + fg_task_tree_hdr_ptr, /* HOST */ + /* Data structure for controlling synchronous link update */ + hfg_sync_update_ptr /* HOST */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + begin_foreground_FCNT, /* SP */ + /* Place holder for holding sleep timing */ + last_FCNT_before_sleep /* SP */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + unused7, /* SP */ + next_task_treePtr /* SP */ + ) + + u32 unused5; + + ___DSP_DUAL_16BIT_ALLOC( + active_flags, /* SP */ + /* State flags, used to assist control of execution of Hyper Forground */ + HFG_flags /* SP */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + unused9, + unused8 + ) + + /* Space for saving enough context so that we can set up enough + to save some more context. + */ + u32 rFE_save_for_invalid_IP; + u32 r32_save_for_spurious_int; + u32 r32_save_for_trap; + u32 r32_save_for_HFG; +}; + +/* SPB for MIX_TO_OSTREAM algorithm family */ +struct dsp_mix2_ostream_spb +{ + /* 16b.16b integer.frac approximation to the + number of 3 sample triplets to output each + frame. (approximation must be floor, to + insure that the fractional error is always + positive) + */ + u32 outTripletsPerFrame; + + /* 16b.16b integer.frac accumulated number of + output triplets since the start of group + */ + u32 accumOutTriplets; +}; + +/* SCB for Timing master algorithm */ +struct dsp_timing_master_scb { + /* First 12 dwords from generic_scb_t */ + struct dsp_basic_dma_req basic_req; /* Optional */ + struct dsp_scatter_gather_ext sg_ext; /* Optional */ + ___DSP_DUAL_16BIT_ALLOC( + next_scb, /* REQUIRED */ + sub_list_ptr /* REQUIRED */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, /* REQUIRED */ + this_spb /* REQUIRED */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + /* Initial values are 0000:xxxx */ + reserved, + extra_sample_accum + ) + + + /* Initial values are xxxx:0000 + hi: Current CODEC output FIFO pointer + (0 to 0x0f) + lo: Flag indicating that the CODEC + FIFO is sync'd (host clears to + resynchronize the FIFO pointer + upon start/restart) + */ + ___DSP_DUAL_16BIT_ALLOC( + codec_FIFO_syncd, + codec_FIFO_ptr + ) + + /* Init. 8000:0005 for 44.1k + 8000:0001 for 48k + hi: Fractional sample accumulator 0.16b + lo: Number of frames remaining to be + processed in the current group of + frames + */ + ___DSP_DUAL_16BIT_ALLOC( + frac_samp_accum_qm1, + TM_frms_left_in_group + ) + + /* Init. 0001:0005 for 44.1k + 0000:0001 for 48k + hi: Fractional sample correction factor 0.16b + to be added every frameGroupLength frames + to correct for truncation error in + nsamp_per_frm_q15 + lo: Number of frames in the group + */ + ___DSP_DUAL_16BIT_ALLOC( + frac_samp_correction_qm1, + TM_frm_group_length + ) + + /* Init. 44.1k*65536/8k = 0x00058333 for 44.1k + 48k*65536/8k = 0x00060000 for 48k + 16b.16b integer.frac approximation to the + number of samples to output each frame. + (approximation must be floor, to insure */ + u32 nsamp_per_frm_q15; +}; + +/* SCB for CODEC output algorithm */ +struct dsp_codec_output_scb { + /* First 13 dwords from generic_scb_t */ + struct dsp_basic_dma_req basic_req; /* Optional */ + struct dsp_scatter_gather_ext sg_ext; /* Optional */ + ___DSP_DUAL_16BIT_ALLOC( + next_scb, /* REQUIRED */ + sub_list_ptr /* REQUIRED */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, /* REQUIRED */ + this_spb /* REQUIRED */ + ) + + u32 strm_rs_config; /* REQUIRED */ + + u32 strm_buf_ptr; /* REQUIRED */ + + /* NOTE: The CODEC output task reads samples from the first task on its + sublist at the stream buffer pointer (init. to lag DMA destination + address word). After the required number of samples is transferred, + the CODEC output task advances sub_list_ptr->strm_buf_ptr past the samples + consumed. + */ + + /* Init. 0000:0010 for SDout + 0060:0010 for SDout2 + 0080:0010 for SDout3 + hi: Base IO address of FIFO to which + the left-channel samples are to + be written. + lo: Displacement for the base IO + address for left-channel to obtain + the base IO address for the FIFO + to which the right-channel samples + are to be written. + */ + ___DSP_DUAL_16BIT_ALLOC( + left_chan_base_IO_addr, + right_chan_IO_disp + ) + + + /* Init: 0x0080:0004 for non-AC-97 + Init: 0x0080:0000 for AC-97 + hi: Exponential volume change rate + for input stream + lo: Positive shift count to shift the + 16-bit input sample to obtain the + 32-bit output word + */ + ___DSP_DUAL_16BIT_ALLOC( + CO_scale_shift_count, + CO_exp_vol_change_rate + ) + + /* Pointer to SCB at end of input chain */ + ___DSP_DUAL_16BIT_ALLOC( + reserved, + last_sub_ptr + ) +}; + +/* SCB for CODEC input algorithm */ +struct dsp_codec_input_scb { + /* First 13 dwords from generic_scb_t */ + struct dsp_basic_dma_req basic_req; /* Optional */ + struct dsp_scatter_gather_ext sg_ext; /* Optional */ + ___DSP_DUAL_16BIT_ALLOC( + next_scb, /* REQUIRED */ + sub_list_ptr /* REQUIRED */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, /* REQUIRED */ + this_spb /* REQUIRED */ + ) + + u32 strm_rs_config; /* REQUIRED */ + u32 strm_buf_ptr; /* REQUIRED */ + + /* NOTE: The CODEC input task reads samples from the hardware FIFO + sublist at the DMA source address word (sub_list_ptr->basic_req.saw). + After the required number of samples is transferred, the CODEC + output task advances sub_list_ptr->basic_req.saw past the samples + consumed. SPuD must initialize the sub_list_ptr->basic_req.saw + to point half-way around from the initial sub_list_ptr->strm_nuf_ptr + to allow for lag/lead. + */ + + /* Init. 0000:0010 for SDout + 0060:0010 for SDout2 + 0080:0010 for SDout3 + hi: Base IO address of FIFO to which + the left-channel samples are to + be written. + lo: Displacement for the base IO + address for left-channel to obtain + the base IO address for the FIFO + to which the right-channel samples + are to be written. + */ + ___DSP_DUAL_16BIT_ALLOC( + rightChanINdisp, + left_chan_base_IN_addr + ) + /* Init. ?:fffc + lo: Negative shift count to shift the + 32-bit input dword to obtain the + 16-bit sample msb-aligned (count + is negative to shift left) + */ + ___DSP_DUAL_16BIT_ALLOC( + scaleShiftCount, + reserver1 + ) + + u32 reserved2; +}; + + +struct dsp_pcm_serial_input_scb { + /* First 13 dwords from generic_scb_t */ + struct dsp_basic_dma_req basic_req; /* Optional */ + struct dsp_scatter_gather_ext sg_ext; /* Optional */ + ___DSP_DUAL_16BIT_ALLOC( + next_scb, /* REQUIRED */ + sub_list_ptr /* REQUIRED */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, /* REQUIRED */ + this_spb /* REQUIRED */ + ) + + u32 strm_buf_ptr; /* REQUIRED */ + u32 strm_rs_config; /* REQUIRED */ + + /* Init. Ptr to CODEC input SCB + hi: Pointer to the SCB containing the + input buffer to which CODEC input + samples are written + lo: Flag indicating the link to the CODEC + input task is to be initialized + */ + ___DSP_DUAL_16BIT_ALLOC( + init_codec_input_link, + codec_input_buf_scb + ) + + /* Initialized by the host (host updates target volumes) */ + struct dsp_volume_control psi_vol_ctrl; + +}; + +struct dsp_src_task_scb { + ___DSP_DUAL_16BIT_ALLOC( + frames_left_in_gof, + gofs_left_in_sec + ) + + ___DSP_DUAL_16BIT_ALLOC( + const2_thirds, + num_extra_tnput_samples + ) + + ___DSP_DUAL_16BIT_ALLOC( + cor_per_gof, + correction_per_sec + ) + + ___DSP_DUAL_16BIT_ALLOC( + output_buf_producer_ptr, + junk_DMA_MID + ) + + ___DSP_DUAL_16BIT_ALLOC( + gof_length, + gofs_per_sec + ) + + u32 input_buf_strm_config; + + ___DSP_DUAL_16BIT_ALLOC( + reserved_for_SRC_use, + input_buf_consumer_ptr + ) + + u32 accum_phi; + + ___DSP_DUAL_16BIT_ALLOC( + exp_src_vol_change_rate, + input_buf_producer_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + src_next_scb, + src_sub_list_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + src_entry_point, + src_this_sbp + ) + + u32 src_strm_rs_config; + u32 src_strm_buf_ptr; + + u32 phiIncr6int_26frac; + + struct dsp_volume_control src_vol_ctrl; +}; + +struct dsp_decimate_by_pow2_scb { + /* decimationFactor = 2, 4, or 8 (larger factors waste too much memory + when compared to cascading decimators) + */ + ___DSP_DUAL_16BIT_ALLOC( + dec2_coef_base_ptr, + dec2_coef_increment + ) + + /* coefIncrement = 128 / decimationFactor (for our ROM filter) + coefBasePtr = 0x8000 (for our ROM filter) + */ + ___DSP_DUAL_16BIT_ALLOC( + dec2_in_samples_per_out_triplet, + dec2_extra_in_samples + ) + /* extraInSamples: # of accumulated, unused input samples (init. to 0) + inSamplesPerOutTriplet = 3 * decimationFactor + */ + + ___DSP_DUAL_16BIT_ALLOC( + dec2_const2_thirds, + dec2_half_num_taps_mp5 + ) + /* halfNumTapsM5: (1/2 number of taps in decimation filter) minus 5 + const2thirds: constant 2/3 in 16Q0 format (sign.15) + */ + + ___DSP_DUAL_16BIT_ALLOC( + dec2_output_buf_producer_ptr, + dec2_junkdma_mid + ) + + u32 dec2_reserved2; + + u32 dec2_input_nuf_strm_config; + /* inputBufStrmConfig: rsConfig for the input buffer to the decimator + (buffer size = decimationFactor * 32 dwords) + */ + + ___DSP_DUAL_16BIT_ALLOC( + dec2_phi_incr, + dec2_input_buf_consumer_ptr + ) + /* inputBufConsumerPtr: Input buffer read pointer (into SRC filter) + phiIncr = decimationFactor * 4 + */ + + u32 dec2_reserved3; + + ___DSP_DUAL_16BIT_ALLOC( + dec2_exp_vol_change_rate, + dec2_input_buf_producer_ptr + ) + /* inputBufProducerPtr: Input buffer write pointer + expVolChangeRate: Exponential volume change rate for possible + future mixer on input streams + */ + + ___DSP_DUAL_16BIT_ALLOC( + dec2_next_scb, + dec2_sub_list_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + dec2_entry_point, + dec2_this_spb + ) + + u32 dec2_strm_rs_config; + u32 dec2_strm_buf_ptr; + + u32 dec2_reserved4; + + struct dsp_volume_control dec2_vol_ctrl; /* Not used! */ +}; + +struct dsp_vari_decimate_scb { + ___DSP_DUAL_16BIT_ALLOC( + vdec_frames_left_in_gof, + vdec_gofs_left_in_sec + ) + + ___DSP_DUAL_16BIT_ALLOC( + vdec_const2_thirds, + vdec_extra_in_samples + ) + /* extraInSamples: # of accumulated, unused input samples (init. to 0) + const2thirds: constant 2/3 in 16Q0 format (sign.15) */ + + ___DSP_DUAL_16BIT_ALLOC( + vdec_cor_per_gof, + vdec_correction_per_sec + ) + + ___DSP_DUAL_16BIT_ALLOC( + vdec_output_buf_producer_ptr, + vdec_input_buf_consumer_ptr + ) + /* inputBufConsumerPtr: Input buffer read pointer (into SRC filter) */ + ___DSP_DUAL_16BIT_ALLOC( + vdec_gof_length, + vdec_gofs_per_sec + ) + + u32 vdec_input_buf_strm_config; + /* inputBufStrmConfig: rsConfig for the input buffer to the decimator + (buffer size = 64 dwords) */ + u32 vdec_coef_increment; + /* coefIncrement = - 128.0 / decimationFactor (as a 32Q15 number) */ + + u32 vdec_accumphi; + /* accumPhi: accumulated fractional phase increment (6.26) */ + + ___DSP_DUAL_16BIT_ALLOC( + vdec_exp_vol_change_rate, + vdec_input_buf_producer_ptr + ) + /* inputBufProducerPtr: Input buffer write pointer + expVolChangeRate: Exponential volume change rate for possible + future mixer on input streams */ + + ___DSP_DUAL_16BIT_ALLOC( + vdec_next_scb, + vdec_sub_list_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + vdec_entry_point, + vdec_this_spb + ) + + u32 vdec_strm_rs_config; + u32 vdec_strm_buf_ptr; + + u32 vdec_phi_incr_6int_26frac; + + struct dsp_volume_control vdec_vol_ctrl; +}; + + +/* SCB for MIX_TO_OSTREAM algorithm family */ +struct dsp_mix2_ostream_scb { + /* First 13 dwords from generic_scb_t */ + struct dsp_basic_dma_req basic_req; /* Optional */ + struct dsp_scatter_gather_ext sg_ext; /* Optional */ + ___DSP_DUAL_16BIT_ALLOC( + next_scb, /* REQUIRED */ + sub_list_ptr /* REQUIRED */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, /* REQUIRED */ + this_spb /* REQUIRED */ + ) + + u32 strm_rs_config; /* REQUIRED */ + u32 strm_buf_ptr; /* REQUIRED */ + + + /* hi: Number of mixed-down input triplets + computed since start of group + lo: Number of frames remaining to be + processed in the current group of + frames + */ + ___DSP_DUAL_16BIT_ALLOC( + frames_left_in_group, + accum_input_triplets + ) + + /* hi: Exponential volume change rate + for mixer on input streams + lo: Number of frames in the group + */ + ___DSP_DUAL_16BIT_ALLOC( + frame_group_length, + exp_vol_change_rate + ) + + ___DSP_DUAL_16BIT_ALLOC( + const_FFFF, + const_zero + ) +}; + + +/* SCB for S16_MIX algorithm */ +struct dsp_mix_only_scb { + /* First 13 dwords from generic_scb_t */ + struct dsp_basic_dma_req basic_req; /* Optional */ + struct dsp_scatter_gather_ext sg_ext; /* Optional */ + ___DSP_DUAL_16BIT_ALLOC( + next_scb, /* REQUIRED */ + sub_list_ptr /* REQUIRED */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, /* REQUIRED */ + this_spb /* REQUIRED */ + ) + + u32 strm_rs_config; /* REQUIRED */ + u32 strm_buf_ptr; /* REQUIRED */ + + u32 reserved; + struct dsp_volume_control vol_ctrl; +}; + +/* SCB for the async. CODEC input algorithm */ +struct dsp_async_codec_input_scb { + u32 io_free2; + + u32 io_current_total; + u32 io_previous_total; + + u16 io_count; + u16 io_count_limit; + + u16 o_fifo_base_addr; + u16 ost_mo_format; + /* 1 = stereo; 0 = mono + xxx for ASER 1 (not allowed); 118 for ASER2 */ + + u32 ostrm_rs_config; + u32 ostrm_buf_ptr; + + ___DSP_DUAL_16BIT_ALLOC( + io_sclks_per_lr_clk, + io_io_enable + ) + + u32 io_free4; + + ___DSP_DUAL_16BIT_ALLOC( + io_next_scb, + io_sub_list_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + io_entry_point, + io_this_spb + ) + + u32 istrm_rs_config; + u32 istrm_buf_ptr; + + /* Init. 0000:8042: for ASER1 + 0000:8044: for ASER2 */ + ___DSP_DUAL_16BIT_ALLOC( + io_stat_reg_addr, + iofifo_pointer + ) + + /* Init 1 stero:100 ASER1 + Init 0 mono:110 ASER2 + */ + ___DSP_DUAL_16BIT_ALLOC( + ififo_base_addr, + ist_mo_format + ) + + u32 i_free; +}; + + +/* SCB for the SP/DIF CODEC input and output */ +struct dsp_spdifiscb { + ___DSP_DUAL_16BIT_ALLOC( + status_ptr, + status_start_ptr + ) + + u32 current_total; + u32 previous_total; + + ___DSP_DUAL_16BIT_ALLOC( + count, + count_limit + ) + + u32 status_data; + + ___DSP_DUAL_16BIT_ALLOC( + status, + free4 + ) + + u32 free3; + + ___DSP_DUAL_16BIT_ALLOC( + free2, + bit_count + ) + + u32 temp_status; + + ___DSP_DUAL_16BIT_ALLOC( + next_SCB, + sub_list_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, + this_spb + ) + + u32 strm_rs_config; + u32 strm_buf_ptr; + + ___DSP_DUAL_16BIT_ALLOC( + stat_reg_addr, + fifo_pointer + ) + + ___DSP_DUAL_16BIT_ALLOC( + fifo_base_addr, + st_mo_format + ) + + u32 free1; +}; + + +/* SCB for the SP/DIF CODEC input and output */ +struct dsp_spdifoscb { + + u32 free2; + + u32 free3[4]; + + /* Need to be here for compatibility with AsynchFGTxCode */ + u32 strm_rs_config; + + u32 strm_buf_ptr; + + ___DSP_DUAL_16BIT_ALLOC( + status, + free5 + ) + + u32 free4; + + ___DSP_DUAL_16BIT_ALLOC( + next_scb, + sub_list_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, + this_spb + ) + + u32 free6[2]; + + ___DSP_DUAL_16BIT_ALLOC( + stat_reg_addr, + fifo_pointer + ) + + ___DSP_DUAL_16BIT_ALLOC( + fifo_base_addr, + st_mo_format + ) + + u32 free1; +}; + + +struct dsp_asynch_fg_rx_scb { + ___DSP_DUAL_16BIT_ALLOC( + bot_buf_mask, + buf_Mask + ) + + ___DSP_DUAL_16BIT_ALLOC( + max, + min + ) + + ___DSP_DUAL_16BIT_ALLOC( + old_producer_pointer, + hfg_scb_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + delta, + adjust_count + ) + + u32 unused2[5]; + + ___DSP_DUAL_16BIT_ALLOC( + sibling_ptr, + child_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + code_ptr, + this_ptr + ) + + u32 strm_rs_config; + + u32 strm_buf_ptr; + + u32 unused_phi_incr; + + ___DSP_DUAL_16BIT_ALLOC( + right_targ, + left_targ + ) + + ___DSP_DUAL_16BIT_ALLOC( + right_vol, + left_vol + ) +}; + + +struct dsp_asynch_fg_tx_scb { + ___DSP_DUAL_16BIT_ALLOC( + not_buf_mask, + buf_mask + ) + + ___DSP_DUAL_16BIT_ALLOC( + max, + min + ) + + ___DSP_DUAL_16BIT_ALLOC( + unused1, + hfg_scb_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + delta, + adjust_count + ) + + u32 accum_phi; + + ___DSP_DUAL_16BIT_ALLOC( + unused2, + const_one_third + ) + + u32 unused3[3]; + + ___DSP_DUAL_16BIT_ALLOC( + sibling_ptr, + child_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + codePtr, + this_ptr + ) + + u32 strm_rs_config; + + u32 strm_buf_ptr; + + u32 phi_incr; + + ___DSP_DUAL_16BIT_ALLOC( + unused_right_targ, + unused_left_targ + ) + + ___DSP_DUAL_16BIT_ALLOC( + unused_right_vol, + unused_left_vol + ) +}; + + +struct dsp_output_snoop_scb { + /* First 13 dwords from generic_scb_t */ + struct dsp_basic_dma_req basic_req; /* Optional */ + struct dsp_scatter_gather_ext sg_ext; /* Optional */ + ___DSP_DUAL_16BIT_ALLOC( + next_scb, /* REQUIRED */ + sub_list_ptr /* REQUIRED */ + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, /* REQUIRED */ + this_spb /* REQUIRED */ + ) + + u32 strm_rs_config; /* REQUIRED */ + u32 strm_buf_ptr; /* REQUIRED */ + + ___DSP_DUAL_16BIT_ALLOC( + init_snoop_input_link, + snoop_child_input_scb + ) + + u32 snoop_input_buf_ptr; + + ___DSP_DUAL_16BIT_ALLOC( + reserved, + input_scb + ) +}; + +struct dsp_spio_write_scb { + ___DSP_DUAL_16BIT_ALLOC( + address1, + address2 + ) + + u32 data1; + + u32 data2; + + ___DSP_DUAL_16BIT_ALLOC( + address3, + address4 + ) + + u32 data3; + + u32 data4; + + ___DSP_DUAL_16BIT_ALLOC( + unused1, + data_ptr + ) + + u32 unused2[2]; + + ___DSP_DUAL_16BIT_ALLOC( + sibling_ptr, + child_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, + this_ptr + ) + + u32 unused3[5]; +}; + +struct dsp_magic_snoop_task { + u32 i0; + u32 i1; + + u32 strm_buf_ptr1; + + u16 i2; + u16 snoop_scb; + + u32 i3; + u32 i4; + u32 i5; + u32 i6; + + u32 i7; + + ___DSP_DUAL_16BIT_ALLOC( + next_scb, + sub_list_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, + this_ptr + ) + + u32 strm_buf_config; + u32 strm_buf_ptr2; + + u32 i8; + + struct dsp_volume_control vdec_vol_ctrl; +}; + + +struct dsp_filter_scb { + ___DSP_DUAL_16BIT_ALLOC( + a0_right, /* 0x00 */ + a0_left + ) + ___DSP_DUAL_16BIT_ALLOC( + a1_right, /* 0x01 */ + a1_left + ) + ___DSP_DUAL_16BIT_ALLOC( + a2_right, /* 0x02 */ + a2_left + ) + ___DSP_DUAL_16BIT_ALLOC( + output_buf_ptr, /* 0x03 */ + init + ) + + ___DSP_DUAL_16BIT_ALLOC( + filter_unused3, /* 0x04 */ + filter_unused2 + ) + + u32 prev_sample_output1; /* 0x05 */ + u32 prev_sample_output2; /* 0x06 */ + u32 prev_sample_input1; /* 0x07 */ + u32 prev_sample_input2; /* 0x08 */ + + ___DSP_DUAL_16BIT_ALLOC( + next_scb_ptr, /* 0x09 */ + sub_list_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + entry_point, /* 0x0A */ + spb_ptr + ) + + u32 strm_rs_config; /* 0x0B */ + u32 strm_buf_ptr; /* 0x0C */ + + ___DSP_DUAL_16BIT_ALLOC( + b0_right, /* 0x0D */ + b0_left + ) + ___DSP_DUAL_16BIT_ALLOC( + b1_right, /* 0x0E */ + b1_left + ) + ___DSP_DUAL_16BIT_ALLOC( + b2_right, /* 0x0F */ + b2_left + ) +}; +#endif /* __DSP_SCB_TYPES_H__ */ diff --git a/sound/pci/cs46xx/cs46xx_dsp_spos.h b/sound/pci/cs46xx/cs46xx_dsp_spos.h new file mode 100644 index 0000000..8008c59 --- /dev/null +++ b/sound/pci/cs46xx/cs46xx_dsp_spos.h @@ -0,0 +1,234 @@ +/* + * The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards + * Copyright (c) by Jaroslav Kysela <perex@perex.cz> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __CS46XX_DSP_SPOS_H__ +#define __CS46XX_DSP_SPOS_H__ + +#include "cs46xx_dsp_scb_types.h" +#include "cs46xx_dsp_task_types.h" + +#define SYMBOL_CONSTANT 0x0 +#define SYMBOL_SAMPLE 0x1 +#define SYMBOL_PARAMETER 0x2 +#define SYMBOL_CODE 0x3 + +#define SEGTYPE_SP_PROGRAM 0x00000001 +#define SEGTYPE_SP_PARAMETER 0x00000002 +#define SEGTYPE_SP_SAMPLE 0x00000003 +#define SEGTYPE_SP_COEFFICIENT 0x00000004 + +#define DSP_SPOS_UU 0x0deadul /* unused */ +#define DSP_SPOS_DC 0x0badul /* don't care */ +#define DSP_SPOS_DC_DC 0x0bad0badul /* don't care */ +#define DSP_SPOS_UUUU 0xdeadc0edul /* unused */ +#define DSP_SPOS_UUHI 0xdeadul +#define DSP_SPOS_UULO 0xc0edul +#define DSP_SPOS_DCDC 0x0badf1d0ul /* don't care */ +#define DSP_SPOS_DCDCHI 0x0badul +#define DSP_SPOS_DCDCLO 0xf1d0ul + +#define DSP_MAX_TASK_NAME 60 +#define DSP_MAX_SYMBOL_NAME 100 +#define DSP_MAX_SCB_NAME 60 +#define DSP_MAX_SCB_DESC 200 +#define DSP_MAX_TASK_DESC 50 + +#define DSP_MAX_PCM_CHANNELS 32 +#define DSP_MAX_SRC_NR 14 + +#define DSP_PCM_MAIN_CHANNEL 1 +#define DSP_PCM_REAR_CHANNEL 2 +#define DSP_PCM_CENTER_LFE_CHANNEL 3 +#define DSP_PCM_S71_CHANNEL 4 /* surround 7.1 */ +#define DSP_IEC958_CHANNEL 5 + +#define DSP_SPDIF_STATUS_OUTPUT_ENABLED 1 +#define DSP_SPDIF_STATUS_PLAYBACK_OPEN 2 +#define DSP_SPDIF_STATUS_HW_ENABLED 4 +#define DSP_SPDIF_STATUS_INPUT_CTRL_ENABLED 8 + +struct dsp_symbol_entry { + u32 address; + char symbol_name[DSP_MAX_SYMBOL_NAME]; + int symbol_type; + + /* initialized by driver */ + struct dsp_module_desc * module; + int deleted; +}; + +struct dsp_symbol_desc { + int nsymbols; + + struct dsp_symbol_entry *symbols; + + /* initialized by driver */ + int highest_frag_index; +}; + +struct dsp_segment_desc { + int segment_type; + u32 offset; + u32 size; + u32 * data; +}; + +struct dsp_module_desc { + char * module_name; + struct dsp_symbol_desc symbol_table; + int nsegments; + struct dsp_segment_desc * segments; + + /* initialized by driver */ + u32 overlay_begin_address; + u32 load_address; + int nfixups; +}; + +struct dsp_scb_descriptor { + char scb_name[DSP_MAX_SCB_NAME]; + u32 address; + int index; + u32 *data; + + struct dsp_scb_descriptor * sub_list_ptr; + struct dsp_scb_descriptor * next_scb_ptr; + struct dsp_scb_descriptor * parent_scb_ptr; + + struct dsp_symbol_entry * task_entry; + struct dsp_symbol_entry * scb_symbol; + + struct snd_info_entry *proc_info; + int ref_count; + + u16 volume[2]; + unsigned int deleted :1; + unsigned int updated :1; + unsigned int volume_set :1; +}; + +struct dsp_task_descriptor { + char task_name[DSP_MAX_TASK_NAME]; + int size; + u32 address; + int index; + u32 *data; +}; + +struct dsp_pcm_channel_descriptor { + int active; + int src_slot; + int pcm_slot; + u32 sample_rate; + u32 unlinked; + struct dsp_scb_descriptor * pcm_reader_scb; + struct dsp_scb_descriptor * src_scb; + struct dsp_scb_descriptor * mixer_scb; + + void * private_data; +}; + +struct dsp_spos_instance { + struct dsp_symbol_desc symbol_table; /* currently available loaded symbols in SP */ + + int nmodules; + struct dsp_module_desc * modules; /* modules loaded into SP */ + + struct dsp_segment_desc code; + + /* Main PCM playback mixer */ + struct dsp_scb_descriptor * master_mix_scb; + u16 dac_volume_right; + u16 dac_volume_left; + + /* Rear/surround PCM playback mixer */ + struct dsp_scb_descriptor * rear_mix_scb; + + /* Center/LFE mixer */ + struct dsp_scb_descriptor * center_lfe_mix_scb; + + int npcm_channels; + int nsrc_scb; + struct dsp_pcm_channel_descriptor pcm_channels[DSP_MAX_PCM_CHANNELS]; + int src_scb_slots[DSP_MAX_SRC_NR]; + + /* cache this symbols */ + struct dsp_symbol_entry * null_algorithm; /* used by PCMreaderSCB's */ + struct dsp_symbol_entry * s16_up; /* used by SRCtaskSCB's */ + + /* proc fs */ + struct snd_card *snd_card; + struct snd_info_entry * proc_dsp_dir; + struct snd_info_entry * proc_sym_info_entry; + struct snd_info_entry * proc_modules_info_entry; + struct snd_info_entry * proc_parameter_dump_info_entry; + struct snd_info_entry * proc_sample_dump_info_entry; + + /* SCB's descriptors */ + int nscb; + int scb_highest_frag_index; + struct dsp_scb_descriptor scbs[DSP_MAX_SCB_DESC]; + struct snd_info_entry * proc_scb_info_entry; + struct dsp_scb_descriptor * the_null_scb; + + /* Task's descriptors */ + int ntask; + struct dsp_task_descriptor tasks[DSP_MAX_TASK_DESC]; + struct snd_info_entry * proc_task_info_entry; + + /* SPDIF status */ + int spdif_status_out; + int spdif_status_in; + u16 spdif_input_volume_right; + u16 spdif_input_volume_left; + /* spdif channel status, + left right and user validity bits */ + unsigned int spdif_csuv_default; + unsigned int spdif_csuv_stream; + + /* SPDIF input sample rate converter */ + struct dsp_scb_descriptor * spdif_in_src; + /* SPDIF input asynch. receiver */ + struct dsp_scb_descriptor * asynch_rx_scb; + + /* Capture record mixer SCB */ + struct dsp_scb_descriptor * record_mixer_scb; + + /* CODEC input SCB */ + struct dsp_scb_descriptor * codec_in_scb; + + /* reference snooper */ + struct dsp_scb_descriptor * ref_snoop_scb; + + /* SPDIF output PCM reference */ + struct dsp_scb_descriptor * spdif_pcm_input_scb; + + /* asynch TX task */ + struct dsp_scb_descriptor * asynch_tx_scb; + + /* record sources */ + struct dsp_scb_descriptor * pcm_input; + struct dsp_scb_descriptor * adc_input; + + int spdif_in_sample_rate; +}; + +#endif /* __DSP_SPOS_H__ */ diff --git a/sound/pci/cs46xx/cs46xx_dsp_task_types.h b/sound/pci/cs46xx/cs46xx_dsp_task_types.h new file mode 100644 index 0000000..5cf920b --- /dev/null +++ b/sound/pci/cs46xx/cs46xx_dsp_task_types.h @@ -0,0 +1,252 @@ +/* + * The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards + * Copyright (c) by Jaroslav Kysela <perex@perex.cz> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * NOTE: comments are copy/paste from cwcemb80.lst + * provided by Tom Woller at Cirrus (my only + * documentation about the SP OS running inside + * the DSP) + */ + +#ifndef __CS46XX_DSP_TASK_TYPES_H__ +#define __CS46XX_DSP_TASK_TYPES_H__ + +#include "cs46xx_dsp_scb_types.h" + +/********************************************************************************************* +Example hierarchy of stream control blocks in the SP + +hfgTree +Ptr____Call (c) + \ + -------+------ ------------- ------------- ------------- ----- +| SBlaster IF |______\| Foreground |___\| Middlegr'nd |___\| Background |___\| Nul | +| |Goto /| tree header |g /| tree header |g /| tree header |g /| SCB |r + -------------- (g) ------------- ------------- ------------- ----- + |c |c |c |c + | | | | + \/ ------------- ------------- ------------- + | Foreground |_\ | Middlegr'nd |_\ | Background |_\ + | tree |g/ | tree |g/ | tree |g/ + ------------- ------------- ------------- + |c |c |c + | | | + \/ \/ \/ + +*********************************************************************************************/ + +#define HFG_FIRST_EXECUTE_MODE 0x0001 +#define HFG_FIRST_EXECUTE_MODE_BIT 0 +#define HFG_CONTEXT_SWITCH_MODE 0x0002 +#define HFG_CONTEXT_SWITCH_MODE_BIT 1 + +#define MAX_FG_STACK_SIZE 32 /* THESE NEED TO BE COMPUTED PROPERLY */ +#define MAX_MG_STACK_SIZE 16 +#define MAX_BG_STACK_SIZE 9 +#define MAX_HFG_STACK_SIZE 4 + +#define SLEEP_ACTIVE_INCREMENT 0 /* Enable task tree thread to go to sleep + This should only ever be used on the Background thread */ +#define STANDARD_ACTIVE_INCREMENT 1 /* Task tree thread normal operation */ +#define SUSPEND_ACTIVE_INCREMENT 2 /* Cause execution to suspend in the task tree thread + This should only ever be used on the Background thread */ + +#define HOSTFLAGS_DISABLE_BG_SLEEP 0 /* Host-controlled flag that determines whether we go to sleep + at the end of BG */ + +/* Minimal context save area for Hyper Forground */ +struct dsp_hf_save_area { + u32 r10_save; + u32 r54_save; + u32 r98_save; + + ___DSP_DUAL_16BIT_ALLOC( + status_save, + ind_save + ) + + ___DSP_DUAL_16BIT_ALLOC( + rci1_save, + rci0_save + ) + + u32 r32_save; + u32 r76_save; + u32 rsd2_save; + + ___DSP_DUAL_16BIT_ALLOC( + rsi2_save, /* See TaskTreeParameterBlock for + remainder of registers */ + rsa2Save + ) + /* saved as part of HFG context */ +}; + + +/* Task link data structure */ +struct dsp_tree_link { + ___DSP_DUAL_16BIT_ALLOC( + /* Pointer to sibling task control block */ + next_scb, + /* Pointer to child task control block */ + sub_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + /* Pointer to code entry point */ + entry_point, + /* Pointer to local data */ + this_spb + ) +}; + + +struct dsp_task_tree_data { + ___DSP_DUAL_16BIT_ALLOC( + /* Initial tock count; controls task tree execution rate */ + tock_count_limit, + /* Tock down counter */ + tock_count + ) + + /* Add to ActiveCount when TockCountLimit reached: + Subtract on task tree termination */ + ___DSP_DUAL_16BIT_ALLOC( + active_tncrement, + /* Number of pending activations for task tree */ + active_count + ) + + ___DSP_DUAL_16BIT_ALLOC( + /* BitNumber to enable modification of correct bit in ActiveTaskFlags */ + active_bit, + /* Pointer to OS location for indicating current activity on task level */ + active_task_flags_ptr + ) + + /* Data structure for controlling movement of memory blocks:- + currently unused */ + ___DSP_DUAL_16BIT_ALLOC( + mem_upd_ptr, + /* Data structure for controlling synchronous link update */ + link_upd_ptr + ) + + ___DSP_DUAL_16BIT_ALLOC( + /* Save area for remainder of full context. */ + save_area, + /* Address of start of local stack for data storage */ + data_stack_base_ptr + ) + +}; + + +struct dsp_interval_timer_data +{ + /* These data items have the same relative locations to those */ + ___DSP_DUAL_16BIT_ALLOC( + interval_timer_period, + itd_unused + ) + + /* used for this data in the SPOS control block for SPOS 1.0 */ + ___DSP_DUAL_16BIT_ALLOC( + num_FG_ticks_this_interval, + num_intervals + ) +}; + + +/* This structure contains extra storage for the task tree + Currently, this additional data is related only to a full context save */ +struct dsp_task_tree_context_block { + /* Up to 10 values are saved onto the stack. 8 for the task tree, 1 for + The access to the context switch (call or interrupt), and 1 spare that + users should never use. This last may be required by the system */ + ___DSP_DUAL_16BIT_ALLOC( + stack1, + stack0 + ) + ___DSP_DUAL_16BIT_ALLOC( + stack3, + stack2 + ) + ___DSP_DUAL_16BIT_ALLOC( + stack5, + stack4 + ) + ___DSP_DUAL_16BIT_ALLOC( + stack7, + stack6 + ) + ___DSP_DUAL_16BIT_ALLOC( + stack9, + stack8 + ) + + u32 saverfe; + + /* Value may be overwriten by stack save algorithm. + Retain the size of the stack data saved here if used */ + ___DSP_DUAL_16BIT_ALLOC( + reserved1, + stack_size + ) + u32 saverba; /* (HFG) */ + u32 saverdc; + u32 savers_config_23; /* (HFG) */ + u32 savers_DMA23; /* (HFG) */ + u32 saversa0; + u32 saversi0; + u32 saversa1; + u32 saversi1; + u32 saversa3; + u32 saversd0; + u32 saversd1; + u32 saversd3; + u32 savers_config01; + u32 savers_DMA01; + u32 saveacc0hl; + u32 saveacc1hl; + u32 saveacc0xacc1x; + u32 saveacc2hl; + u32 saveacc3hl; + u32 saveacc2xacc3x; + u32 saveaux0hl; + u32 saveaux1hl; + u32 saveaux0xaux1x; + u32 saveaux2hl; + u32 saveaux3hl; + u32 saveaux2xaux3x; + u32 savershouthl; + u32 savershoutxmacmode; +}; + + +struct dsp_task_tree_control_block { + struct dsp_hf_save_area context; + struct dsp_tree_link links; + struct dsp_task_tree_data data; + struct dsp_task_tree_context_block context_blk; + struct dsp_interval_timer_data int_timer; +}; + + +#endif /* __DSP_TASK_TYPES_H__ */ diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c index 4fa5316..f75f5ff 100644 --- a/sound/pci/cs46xx/cs46xx_lib.c +++ b/sound/pci/cs46xx/cs46xx_lib.c @@ -61,7 +61,7 @@ #include <sound/info.h> #include <sound/pcm.h> #include <sound/pcm_params.h> -#include <sound/cs46xx.h> +#include "cs46xx.h" #include <asm/io.h> @@ -3599,9 +3599,10 @@ static unsigned int saved_regs[] = { BA1_CVOL, }; -int snd_cs46xx_suspend(struct pci_dev *pci, pm_message_t state) +static int snd_cs46xx_suspend(struct device *dev) { - struct snd_card *card = pci_get_drvdata(pci); + struct pci_dev *pci = to_pci_dev(dev); + struct snd_card *card = dev_get_drvdata(dev); struct snd_cs46xx *chip = card->private_data; int i, amp_saved; @@ -3628,13 +3629,14 @@ int snd_cs46xx_suspend(struct pci_dev *pci, pm_message_t state) pci_disable_device(pci); pci_save_state(pci); - pci_set_power_state(pci, pci_choose_state(pci, state)); + pci_set_power_state(pci, PCI_D3hot); return 0; } -int snd_cs46xx_resume(struct pci_dev *pci) +static int snd_cs46xx_resume(struct device *dev) { - struct snd_card *card = pci_get_drvdata(pci); + struct pci_dev *pci = to_pci_dev(dev); + struct snd_card *card = dev_get_drvdata(dev); struct snd_cs46xx *chip = card->private_data; int amp_saved; #ifdef CONFIG_SND_CS46XX_NEW_DSP @@ -3707,6 +3709,8 @@ int snd_cs46xx_resume(struct pci_dev *pci) snd_power_change_state(card, SNDRV_CTL_POWER_D0); return 0; } + +SIMPLE_DEV_PM_OPS(snd_cs46xx_pm, snd_cs46xx_suspend, snd_cs46xx_resume); #endif /* CONFIG_PM */ diff --git a/sound/pci/cs46xx/dsp_spos.c b/sound/pci/cs46xx/dsp_spos.c index e377287..56fec0b 100644 --- a/sound/pci/cs46xx/dsp_spos.c +++ b/sound/pci/cs46xx/dsp_spos.c @@ -32,7 +32,7 @@ #include <sound/control.h> #include <sound/info.h> #include <sound/asoundef.h> -#include <sound/cs46xx.h> +#include "cs46xx.h" #include "cs46xx_lib.h" #include "dsp_spos.h" diff --git a/sound/pci/cs46xx/dsp_spos_scb_lib.c b/sound/pci/cs46xx/dsp_spos_scb_lib.c index 00b148a..c2c695b 100644 --- a/sound/pci/cs46xx/dsp_spos_scb_lib.c +++ b/sound/pci/cs46xx/dsp_spos_scb_lib.c @@ -31,7 +31,7 @@ #include <sound/core.h> #include <sound/control.h> #include <sound/info.h> -#include <sound/cs46xx.h> +#include "cs46xx.h" #include "cs46xx_lib.h" #include "dsp_spos.h" |