diff options
Diffstat (limited to 'sound/soc/atmel/atmel_ssc_dai.c')
-rw-r--r-- | sound/soc/atmel/atmel_ssc_dai.c | 111 |
1 files changed, 107 insertions, 4 deletions
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index fb0b7e8..841d059 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -187,6 +187,94 @@ static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +/* + * When the bit clock is input, limit the maximum rate according to the + * Serial Clock Ratio Considerations section from the SSC documentation: + * + * The Transmitter and the Receiver can be programmed to operate + * with the clock signals provided on either the TK or RK pins. + * This allows the SSC to support many slave-mode data transfers. + * In this case, the maximum clock speed allowed on the RK pin is: + * - Peripheral clock divided by 2 if Receiver Frame Synchro is input + * - Peripheral clock divided by 3 if Receiver Frame Synchro is output + * In addition, the maximum clock speed allowed on the TK pin is: + * - Peripheral clock divided by 6 if Transmit Frame Synchro is input + * - Peripheral clock divided by 2 if Transmit Frame Synchro is output + * + * When the bit clock is output, limit the rate according to the + * SSC divider restrictions. + */ +static int atmel_ssc_hw_rule_rate(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct atmel_ssc_info *ssc_p = rule->private; + struct ssc_device *ssc = ssc_p->ssc; + struct snd_interval *i = hw_param_interval(params, rule->var); + struct snd_interval t; + struct snd_ratnum r = { + .den_min = 1, + .den_max = 4095, + .den_step = 1, + }; + unsigned int num = 0, den = 0; + int frame_size; + int mck_div = 2; + int ret; + + frame_size = snd_soc_params_to_frame_size(params); + if (frame_size < 0) + return frame_size; + + switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFS: + if ((ssc_p->dir_mask & SSC_DIR_MASK_CAPTURE) + && ssc->clk_from_rk_pin) + /* Receiver Frame Synchro (i.e. capture) + * is output (format is _CFS) and the RK pin + * is used for input (format is _CBM_). + */ + mck_div = 3; + break; + + case SND_SOC_DAIFMT_CBM_CFM: + if ((ssc_p->dir_mask & SSC_DIR_MASK_PLAYBACK) + && !ssc->clk_from_rk_pin) + /* Transmit Frame Synchro (i.e. playback) + * is input (format is _CFM) and the TK pin + * is used for input (format _CBM_ but not + * using the RK pin). + */ + mck_div = 6; + break; + } + + switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + r.num = ssc_p->mck_rate / mck_div / frame_size; + + ret = snd_interval_ratnum(i, 1, &r, &num, &den); + if (ret >= 0 && den && rule->var == SNDRV_PCM_HW_PARAM_RATE) { + params->rate_num = num; + params->rate_den = den; + } + break; + + case SND_SOC_DAIFMT_CBM_CFS: + case SND_SOC_DAIFMT_CBM_CFM: + t.min = 8000; + t.max = ssc_p->mck_rate / mck_div / frame_size; + t.openmin = t.openmax = 0; + t.integer = 0; + ret = snd_interval_refine(i, &t); + break; + + default: + ret = -EINVAL; + break; + } + + return ret; +} /*-------------------------------------------------------------------------*\ * DAI functions @@ -200,6 +288,7 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream, struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; struct atmel_pcm_dma_params *dma_params; int dir, dir_mask; + int ret; pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", ssc_readl(ssc_p->ssc->regs, SR)); @@ -207,6 +296,7 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream, /* Enable PMC peripheral clock for this SSC */ pr_debug("atmel_ssc_dai: Starting clock\n"); clk_enable(ssc_p->ssc->clk); + ssc_p->mck_rate = clk_get_rate(ssc_p->ssc->clk); /* Reset the SSC to keep it at a clean status */ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); @@ -219,6 +309,17 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream, dir_mask = SSC_DIR_MASK_CAPTURE; } + ret = snd_pcm_hw_rule_add(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + atmel_ssc_hw_rule_rate, + ssc_p, + SNDRV_PCM_HW_PARAM_FRAME_BITS, + SNDRV_PCM_HW_PARAM_CHANNELS, -1); + if (ret < 0) { + dev_err(dai->dev, "Failed to specify rate rule: %d\n", ret); + return ret; + } + dma_params = &ssc_dma_params[dai->id][dir]; dma_params->ssc = ssc_p->ssc; dma_params->substream = substream; @@ -783,8 +884,6 @@ static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai) # define atmel_ssc_resume NULL #endif /* CONFIG_PM */ -#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) - #define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) @@ -804,12 +903,16 @@ static struct snd_soc_dai_driver atmel_ssc_dai = { .playback = { .channels_min = 1, .channels_max = 2, - .rates = ATMEL_SSC_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 384000, .formats = ATMEL_SSC_FORMATS,}, .capture = { .channels_min = 1, .channels_max = 2, - .rates = ATMEL_SSC_RATES, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 384000, .formats = ATMEL_SSC_FORMATS,}, .ops = &atmel_ssc_dai_ops, }; |