summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-08-07af_mpls: add null dev check in find_outdevRoopa Prabhu
This patch adds null dev check for the 'cfg->rc_via_table == NEIGH_LINK_TABLE or dev_get_by_index() failed' case Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07Merge branch 'test-bpf-next'David S. Miller
Nicolas Schichan says: ==================== test_bpf improvements Please find below the patch series with my latest changes to test_bpf. The first patch checks for unexpected NULL generated skbs before running the filter. The second patch adds the possibility for tests to generate fragmented skbs. The third patch tests LD_ABS and LD_IND on fragmented skbs. The fourth patch adds the possibility to restrict the tests being run by specifying the name/id/range of the test(s) to run via module parameters. The fifth patch tests LD_ABS and LD_IND on non fragmented skbs with various sizes and alignments. The sixth and final patch checks that the interpreter or JIT correctly resets A and X to 0. This serie is against today's net-next tree. Changes in V2: * move declaration of 'ptr' in if() block in patch 2/6. * fix various typos in patch 4/6 * rework default init of test_range array and cleanup exclude_test() return condition in patch 4/6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07test_bpf: add tests checking that JIT/interpreter sets A and X to 0.Nicolas Schichan
It is mandatory for the JIT or interpreter to reset the A and X registers to 0 before running the filter. Check that it is the case on various ALU and JMP instructions. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07test_bpf: add more tests for LD_ABS and LD_IND.Nicolas Schichan
This exerces the LD_ABS and LD_IND instructions for various sizes and alignments. This also checks that X when used as an offset to a BPF_IND instruction first in a filter is correctly set to 0. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07test_bpf: add module parameters to filter the tests to run.Nicolas Schichan
When developping on the interpreter or a particular JIT, it can be interesting to restrict the tests list to a specific test or a particular range of tests. This patch adds the following module parameters to the test_bpf module: * test_name=<string>: only the specified named test will be run. * test_id=<number>: only the test with the specified id will be run (see the output of test_bpf without parameters to get the test id). * test_range=<number>,<number>: only the tests within IDs in the specified id range are run (see the output of test_bpf without parameters to get the test ids). Any invalid range, test id or test name will result in -EINVAL being returned and no tests being run. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07test_bpf: test LD_ABS and LD_IND instructions on fragmented skbs.Nicolas Schichan
These new tests exercise various load sizes and offsets crossing the head/fragment boundary. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07test_bpf: allow tests to specify an skb fragment.Nicolas Schichan
This introduce a new test->aux flag (FLAG_SKB_FRAG) to tell the populate_skb() function to add a fragment to the test skb containing the data specified in test->frag_data). Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07test_bpf: avoid oopsing the kernel when generate_test_data() fails.Nicolas Schichan
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07Merge branch 'mlx5e-next'David S. Miller
Amir Vadai says: ==================== net/mlx5e: Driver updates 04-Aug-2015 This patchset introduces two features to the ConnectX-4 driver: Patch 8/8 ("Support physical port counters") exposes some hardware counters through ethtool. Rest of the patches are preparation and usage of what we call light-weight netdev open/close. Some flows that used to be in the ndo_open/stop are moved to the PCI probe/remove flows - i.e. we will make the netdev open/close operations more "light-weight". The benefits of this change are: 1) Reduce the execution time of the stop/open operations. 2) Avoid saving SW shadows of resource configurations that must persist through stop/open operations (e.g flow table steering rules), and avoid deleting/applying them from/to the device upon netdev stop/open. 3) Avoid synchronizing threads that access those resources with the netdev stop/open threads. Instead of create/destroy the resource during netdev open/stop, This patchset changes the behavior such that upon netdev stop, traffic is redirected to a "Drop RQ" (a RQ that silently drops, at the NIC HW level all incoming traffic). After redirecting the traffic, RX/TX software resources could be destroyed. During netdev open, the RX/TX rings are created and traffic is redirected to the RX rings. Patchset was applied and tested over commit ba7591d ("ebpf: add skb->hash to offset map for usage in {cls, act}_bpf or filters") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net/mlx5_core: Support physical port countersGal Pressman
Added physical port counters in the following standard formats to ethtool statistics: - IEEE 802.3 - RFC2863 - RFC2819 Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net/mlx5e: Take advantage of the light-weight netdev open/stopAchiad Shochat
Now that TIRs, TISs and flow tables are kept alive while the netdev is stopped (after executing ndo_stop()) we can do the following improvements: - Obsolete the active_vlans SW shadow. - Do not delete/add flow table rules upon ndo_stop/open. In addition to simplifying the flow, this change also fastens the ndo_open/close operations. - Obsolete synchronization of threads accessing the flow tables with the netdev stop/open threads. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net/mlx5e: Disable async events before unregister_netdev()Achiad Shochat
It does not make sense to allow events while the netdev is unregistered. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net/mlx5e: Rename/move functions following the ndo_stop flow changeAchiad Shochat
Rename some functions that used to be invoked upon ndo_open/stop and are now invoked upon create/destroy_netdev() in order to better hint their place in the flow. Change some functions location in the file so that functions involved in ndo_open/stop flow will not be interleaved with other functions. This is a cosmetic change, no logical change here. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net/mlx5e: Light-weight netdev open/stopAchiad Shochat
Create/destroy TIRs, TISs and flow tables upon PCI probe/remove rather than upon the netdev ndo_open/stop. Upon ndo_stop(), redirect all RX traffic to the (lately introduced) "Drop RQ" and then close only the RX/TX rings, leaving the TIRs, TISs and flow tables alive. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net/mlx5_core: Introduce access function to modify RSS/LRO paramsAchiad Shochat
To be used by the mlx5 Eth driver in following commit. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net/mlx5e: Introduce the "Drop RQ"Achiad Shochat
RX traffic routed to this RQ will be silently dropped, at the NIC HW level. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net/mlx5e: Unify the RX flowAchiad Shochat
Generally an RX packet flows through the following objects: Flow table --> TIR --> RQT --> RQ Where: - TIR stands for "Transport Interface Receive", defining the RSS and LRO paramaters. - RQT stands for "RQ Table", implementing the RSS indirection table. - RQ stands for "Receive Queue" For flows that do not need LRO, nor RSS, the driver made a shortcut to the above RX flow by pointing to the RQ directly from the TIR, yielding this flow: Flow table --> TIR --> RQ In this commit we remove this shortcut by "inserting" a single-RQ RQT between the TIR and the RQ, i.e RX packets will reach the same RQ but will go through an RQT of size 1, pointing to just a single RQ. This way the RX traffic re-direction to/from the "Drop RQ" will be more uniform (AKA "one flow"), as it will involve only RQTs re-direction and no TIRs re-direction. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07Merge branch 'cpsw-next'David S. Miller
Mugunthan V N says: ==================== CPSW interrupt handling cleanup and performance improvement This patch series removes the irq controller disable interrupt and adding a napi for tx event handling which improves the performance by ~180Mbps on dra7-evm [ 5] local 192.168.10.116 port 5001 connected with 192.168.10.165 port 44176 [ 5] 0.0-60.0 sec 1.48 GBytes 210 Mbits/sec [ 4] local 192.168.10.116 port 5001 connected with 192.168.10.165 port 33257 [ 4] 0.0-60.0 sec 2.71 GBytes 386 Mbits/sec Changes from initial version: * Added a patch to have napi only for first interface as there is no use of having seperate napis for each interface as the interrupt is shared by both interface and only one napi is scheduled for each interrupt. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07drivers: net: cpsw: add separate napi for txMugunthan V N
Instead of processing tx events in isr adding separate napi for tx which improves performance by ~180Mbps with omap2plus_defconfig on DRA74x platform. Also cleaning up rx napis by renaming to napi_rx for better understanding the code. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07drivers: net: cpsw: dual_emac: simplify napi usageMugunthan V N
Since interrupt is shared between the two ethernet interface and in isr only one napi is scheduled at an instance so having two napis doesn't make any difference. So making napi also as a common resource for the dual ethernet interfaces. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from ↵Mugunthan V N
cpsw itself CPSW interrupts can be disabled by masking CPSW interrupts and clearing interrupt by writing appropriate EOI. So removing all disable_irq/enable_irq as discussed in [1] [1] http://patchwork.ozlabs.org/patch/492741/ Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07mpls: small cleanup in inet/inet6_fib_lookup_dev()Dan Carpenter
We recently changed this code from returning NULL to returning ERR_PTR. There are some left over NULL assignments which we can remove. We can preserve the error code from ip_route_output() instead of always returning -ENODEV. Also these functions use a mix of gotos and direct returns. There is no cleanup necessary so I changed the gotos to direct returns. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07Merge branch 'bnx2x-cnic-bnx2fc-bd-support'David S. Miller
Yuval Mintz says: ==================== bnx2x, cnic, bnx2fc: add support for BD Commit 230d00eb4bfe ("bnx2x: new Multi-function mode - BD") added support for a new multi-function mode, but it added only the support required by bnx2x for L2 interfaces. This adds the required changes to support the new multi-function mode in the offloaded storage protocols. Dave, Please consider applying this series to `net-next'. Do notice that this involves non-networking driver changes - but sending this as a single series seemed like the best approach as we had to have bnx2x changes to support the new functionality. If this is problematic, please tell us what's the preferred solution here. Changes from previous versions ------------------------------ - From v1 - no actual changes; v1 failed to reach netdev so in order to keep things in line I've termed this one v2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07bnx2fc: Read npiv table from nvram and create vports.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07bnx2x: Add BD support for storageYuval Mintz
Commit 230d00eb4bfe ("bnx2x: new Multi-function mode - BD") adds support for the new mode in bnx2x. This expands this support by implementing APIs required by our storage drivers to support that mode. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07cnic: Add the interfaces to get FC-NPIV table.Adheer Chandravanshi
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07cnic: Populate upper layer driver state in MFWTej Parkash
Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07rocker: use netdev_err after register_netdevScott Feldman
After successful register_netdev, we can use netdev_err rather the more generic dev_err. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07rocker: NULL port if port probe failsScott Feldman
Set port to NULL if port probe fails so we don't try to remove partially initialized port on port probe err cleanup path. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next, they are: 1) A couple of cleanups for the netfilter core hook from Eric Biederman. 2) Net namespace hook registration, also from Eric. This adds a dependency with the rtnl_lock. This should be fine by now but we have to keep an eye on this because if we ever get the per-subsys nfnl_lock before rtnl we have may problems in the future. But we have room to remove this in the future by propagating the complexity to the clients, by registering hooks for the init netns functions. 3) Update nf_tables to use the new net namespace hook infrastructure, also from Eric. 4) Three patches to refine and to address problems from the new net namespace hook infrastructure. 5) Switch to alternate jumpstack in xtables iff the packet is reentering. This only applies to a very special case, the TEE target, but Eric Dumazet reports that this is slowing down things for everyone else. So let's only switch to the alternate jumpstack if the tee target is in used through a static key. This batch also comes with offline precalculation of the jumpstack based on the callchain depth. From Florian Westphal. 6) Minimal SCTP multihoming support for our conntrack helper, from Michal Kubecek. 7) Reduce nf_bridge_info per skbuff scratchpad area to 32 bytes, from Florian Westphal. 8) Fix several checkpatch errors in bridge netfilter, from Bernhard Thaler. 9) Get rid of useless debug message in ip6t_REJECT, from Subash Abhinov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04netfilter: ip6t_REJECT: Remove debug messages from reject_tg6()Subash Abhinov Kasiviswanathan
Make it similar to reject_tg() in ipt_REJECT. Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-04Merge branch 'cxgb4-next'David S. Miller
Hariprasad Shenai says: ==================== add meminfo, bist status and misc. fixes This patch series adds the following. Add support to dump memory address range of various hw modules Add support to dump edc bist status during ecc error Read correct bits of who am i register for T6 adapter and update T6 register range This patch series has been created against net-next tree and includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. V2: PATCH 3/4 ("cxgb4/cxgb4vf: read the correct bits of PL Who Am I register") Fix switch statement in get_chip_type() and some more style fixes based on review comment by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04cxgb4: Update T6 register rangesHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04cxgb4/cxgb4vf: read the correct bits of PL Who Am I registerHariprasad Shenai
Read the correct bits of PL Who Am I for the Source PF field which has changed in T6 Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04cxgb4: Add support to dump edc bist statusHariprasad Shenai
Add support to dump edc bist status for ECC data errors Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04cxgb4: Add debugfs support to dump meminfoHariprasad Shenai
Add debug support to dump memory address ranges of various hardware modules of the adapter. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04mpls: Use definition for reserved label checksRobert Shearman
In multiple locations there are checks for whether the label in hand is a reserved label or not using the arbritray value of 16. Factor this out into a #define for better maintainability and for documentation. Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04Merge branch 'lwtunnel-encap-local'David S. Miller
Robert Shearman says: ==================== lwtunnel: encap locally-generated ipv4 packets Locally-generated IPv4 packets, such as from applications running on the host or traceroute/ping currently don't have lwtunnel output redirected encap applied. However, they should do in the same way as for forwarded packets and this patch series addresses that. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04ipv4: apply lwtunnel encap for locally-generated packetsRobert Shearman
lwtunnel encap is applied for forwarded packets, but not for locally-generated packets. This is because the output function is not overridden in __mkroute_output, unlike it is in __mkroute_input. The lwtunnel state is correctly set on the rth through the call to rt_set_nexthop, so all that needs to be done is to override the dst output function to be lwtunnel_output if there is lwtunnel state present and it requires output redirection. Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04lwtunnel: set skb protocol and devRobert Shearman
In the locally-generated packet path skb->protocol may not be set and this is required for the lwtunnel encap in order to get the lwtstate. This would otherwise have been set by ip_output or ip6_output so set skb->protocol prior to calling the lwtunnel encap function. Additionally set skb->dev in case it is needed further down the transmit path. Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03bridge: mdb: fix vlan_enabled access when vlans are not configuredNikolay Aleksandrov
Instead of trying to access br->vlan_enabled directly use the provided helper br_vlan_enabled(). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03act_bpf: properly support late binding of bpf action to a classifierDaniel Borkmann
Since the introduction of the BPF action in d23b8ad8ab23 ("tc: add BPF based action"), late binding was not working as expected. I.e. setting the action part for a classifier only via 'bpf index <num>', where <num> is the index of an existing action, is being rejected by the kernel due to other missing parameters. It doesn't make sense to require these parameters such as BPF opcodes etc, as they are not going to be used anyway: in this case, they're just allocated/parsed and then freed again w/o doing anything meaningful. Instead, parse and verify the remaining parameters *after* the test on tcf_hash_check(), when we really know that we're dealing with creation of a new action or replacement of an existing one and where late binding is thus irrelevant. After patch, test case is now working: FOO="1,6 0 0 4294967295," tc actions add action bpf bytecode "$FOO" tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action bpf index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 2 bind 1 tc filter show dev foo filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 flowid 1:1 bytecode '1,6 0 0 4294967295' action order 1: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 2 bind 1 Late binding of a BPF action can be useful for preloading maps (e.g. before they hit traffic) in case of eBPF programs, or to share a single eBPF action with multiple classifiers. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03net: dsa: mv88e6xxx: call _mv88e6xxx_stats_wait with SMI lock heldVivien Didelot
At switch setup, _mv88e6xxx_stats_wait was called without holding the SMI mutex. Fix this by requesting the lock for this call. Also, return the _mv88e6xxx_stats_wait code, since it may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03bridge: mdb: add/del entry on all vlans if vlan_filter is enabled and vid is 0Satish Ashok
Before this patch when a vid was not specified, the entry was added with vid 0 which is useless when vlan_filtering is enabled. This patch makes the entry to be added on all configured vlans when vlan filtering is enabled and respectively deleted from all, if the entry vid is 0. This is also closer to the way fdb works with regard to vid 0 and vlan filtering. Example: Setup: $ bridge vlan add vid 256 dev eth4 $ bridge vlan add vid 1024 dev eth4 $ bridge vlan add vid 64 dev eth3 $ bridge vlan add vid 128 dev eth3 $ bridge vlan port vlan ids eth3 1 PVID Egress Untagged 64 128 eth4 1 PVID Egress Untagged 256 1024 $ echo 1 > /sys/class/net/br0/bridge/vlan_filtering Before: $ bridge mdb add dev br0 port eth3 grp 239.0.0.1 $ bridge mdb dev br0 port eth3 grp 239.0.0.1 temp After: $ bridge mdb add dev br0 port eth3 grp 239.0.0.1 $ bridge mdb dev br0 port eth3 grp 239.0.0.1 temp vid 1 dev br0 port eth3 grp 239.0.0.1 temp vid 128 dev br0 port eth3 grp 239.0.0.1 temp vid 64 Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03Merge branch 'stacked-vlan-TSO'David S. Miller
Toshiaki Makita says: ==================== Stacked vlan TSO for virtual devices Basically virtual devices do not need to segment double tagged packets. This patch set adds TSO feature for double tagged packets to several virtual devices, which can be realized by simply setting .ndo_features_check to passthru_features_check. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03tuntap: Don't segment multiple tagged packets on tap deviceToshiaki Makita
Tap devices don't need to segment multiple tagged packets. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03bridge: Don't segment multiple tagged packets on bridge deviceToshiaki Makita
Bridge devices don't need to segment multiple tagged packets since thier ports can segment them. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03veth: Don't segment multiple tagged packets on veth deviceToshiaki Makita
Veth devices don't need to segment multiple tagged packets. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03macvlan: Don't segment multiple tagged packets on macvlan deviceToshiaki Makita
Macvlan/macvtap devices don't need to segment multiple tagged packets since the lower devices can segment them. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03virtio_net: add gro capabilityEric Dumazet
Straightforward patch to add GRO processing to virtio_net. napi_complete_done() usage allows more aggressive aggregation, opted-in by setting /sys/class/net/xxx/gro_flush_timeout Tested: Setting /sys/class/net/xxx/gro_flush_timeout to 1000 nsec, Rick Jones reported following results. One VM of each on a pair of OpenStack compute nodes with E5-2650Lv3 CPUs and Intel 82599ES-based NICs. So, two "before" and two "after" VMs. The OpenStack compute nodes were running OpenStack Kilo, with VxLAN encapsulation being used through OVS so no GRO coming-up the host stack. The compute nodes themselves were running a 3.14-based kernel. Single-stream netperf, CPU utilizations and thus service demands are based on intra-guest reported CPU. Throughput Mbit/s, bigger is better Min Median Average Max 4.2.0-rc3+ 1364 1686 1678 1938 4.2.0-rc3+flush1k 1824 2269 2275 2647 Send Service Demand, smaller is better Min Median Average Max 4.2.0-rc3+ 0.236 0.558 0.524 0.802 4.2.0-rc3+flush1k 0.176 0.503 0.471 0.738 Receive Service Demand, smaller is better. Min Median Average Max 4.2.0-rc3+ 1.906 2.188 2.191 2.531 4.2.0-rc3+flush1k 0.448 0.529 0.533 0.692 Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Rick Jones <rick.jones2@hp.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-10-04 21:32:51 (GMT)