summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-25brcmfmac: Change USB probe routine to support Composite USBHante Meuleman
Some of the USB devices also have Bluetooth inside. These devices can with specific firmware result in a composite USB device. This change will update the driver such that it will also accept the correct interface of composite devices. It is backward compatible with old non-composite USB fw. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25brcmfmac: clear ht info during attach phaseArend van Spriel
After updating 2G bandwidth capability clear ht info. This will be properly set upon calling brcmf_update_wiphy_bands(). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25brcmfmac: Add USB device 43566 to supported devices.Hante Meuleman
Add the USB 43566 device to the supported devices list. The 43566 is a WiFi-only variant of the 43569. It uses the same FW as 43569. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25brcmfmac: Add 43569 USB support.Hante Meuleman
Added usb device id for the new device 43569 to the list of supported devices. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25net/wireless/brcm80211/brcmfmac: Make return type and name reflect actual ↵Rasmus Villemoes
semantics Applying ++ to a bool is equivalent to setting it true, regardless of its initial value (bools are not uint1_t). Hence the function wl_get_vif_state_all can only ever return true/false. The only in-tree caller uses its return value as a boolean. So update its return type, and since the list traversal and bit testing have no side effects, just return true immediately. Its return value tells if any vif is in the specified state, so also rename it to brcmf_get_vif_state_any. Reviewed-by: Arend van Spriel<arend@broadcom.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: print sleep_confirm cmd/response and power save eventsBing Zhao
Sleep Confirm command is sent separately while other commands are handled through cmd_pending_q. Print sleep_confirm cmd and its response as well as power save events so that we have a clearer picture of power save handshake in driver log. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: update Copyright to 2014Xinming Hu
This patch updates mwifiex Copyright to 2014. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: add hscfg to debugfsXinming Hu
Some SDIO controllers do not support MMC_PM_KEEP_POWER properly. To test host sleep feature without putting the system into sleep we need to simulate host sleep configuration & handshake between driver and firmware using customized parameters. This patch adds hscfg debugfs item, with which user could change host sleep parameters for debugging. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: add firmware dump feature for SDIOAmitkumar Karwar
Firmware dump feature is added for SDIO based chipsets which can be used with the help of ethtool commands. 1) Trigger firmware dump operation: ethtool --set-dump mlan0 0xff When the operation is completed, udev event will be sent to trigger external application. 2) Following udev rule can be used to get the data from ethtool: DRIVER=="mwifiex_sdio", ACTION=="change", RUN+="/sbin/mwifiex_sdio_fw_dump.sh" mwifiex_sdio_fw_dump.sh: #!/bin/bash ethtool --set-dump mlan0 0 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ITCM.log ethtool --set-dump mlan0 1 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/DTCM.log ethtool --set-dump mlan0 2 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/SQRAM.log ethtool --set-dump mlan0 3 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/APU.log ethtool --set-dump mlan0 4 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/CIU.log ethtool --set-dump mlan0 5 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ICU.log ethtool --set-dump mlan0 6 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/MAC.log Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: get rid of global pointer reset_hostAmitkumar Karwar
As we can derive host pointer from adapter, maintaining a global variable doesn't make sense. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: use generic 'iface_work' workqueue for SDIO interfaceAmitkumar Karwar
Existing dedicated card_reset work queue is replaced with the interface specific workqueue pointer provided by mwifiex module. Also new work flag is added for card reset task. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: add firmware dump feature for PCIeAmitkumar Karwar
Firmware dump feature is added for PCIe based chipsets which can be used with the help of ethtool commands. 1) Trigger firmware dump operation: ethtool --set-dump mlan0 0xff When the operation is completed, udev event will be sent to trigger external application. 2) Following udev rule can be used to get the data from ethtool: DRIVER=="mwifiex_pcie", ACTION=="change", RUN+="/sbin/mwifiex_pcie_fw_dump.sh" mwifiex_pcie_fw_dump.sh: #!/bin/bash ethtool --set-dump mlan0 0 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ITCM.log ethtool --set-dump mlan0 1 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/DTCM.log ethtool --set-dump mlan0 2 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/SQRAM.log ethtool --set-dump mlan0 3 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/IRAM.log Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville
2014-06-25cfg80211: remove channel_switch combination checkMichal Kazior
Driver is now responsible for veryfing if the switch is possible. Since this is inherently tricky driver may decide to disconnect an interface later with cfg80211_stop_iface(). This doesn't mean driver can accept everything. It should do it's best to verify requests and reject them as soon as possible. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: use chanctx reservation for STA CSAMichal Kazior
Channel switch finalization is now 2-step. First step is when driver calls chswitch_done(), the other is when reservation is actually finalized (which be defered for in-place reservation). It is now safe to call ieee80211_chswitch_done() more than once. Also remove the ieee80211_vif_change_channel() because it is no longer used. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: use chanctx reservation for AP CSAMichal Kazior
Channel switch finalization is now 2-step. First step is when driver calls csa_finish(), the other is when reservation is actually finalized (which can be deferred for in-place reservation). It is now safe to call ieee80211_csa_finish() more than once. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: make check_combinations() aware of chanctx reservationMichal Kazior
The ieee80211_check_combinations() computes radar_detect accordingly depending on chanctx reservation status. This makes it possible to use the function for channel_switch validation. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: implement multi-vif in-place reservationsMichal Kazior
Multi-vif in-place reservations happen when it is impossible to allocate more channel contexts as indicated by interface combinations. Such reservations are not finalized until all assigned interfaces are ready. This still doesn't handle all possible cases (i.e. degradation of number of channels) properly. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: split sched scan IEsDavid Spinadel
Split sched scan IEs to band specific and not band specific blocks. Common IEs blocks may be sent to the FW once per command, instead of per band. This allows optimization of size of the command, which may be required by some drivers (eg. iwlmvm with newer firmware version). As this changes the mac80211 API, update all drivers to use the new version correctly, even if they don't (yet) make use of the split data. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: support more than one band in scan requestDavid Spinadel
Some drivers (such as iwlmvm) can handle multiple bands in a single HW scan request. Add a HW flag to indicate that the driver support this. To hold the required data, create a separate structure for HW scan request that holds cfg scan request and data about different parts of the scan IEs. As this changes the mac80211 API, update all drivers using it to use the correct new function type/argument. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-24iwlwifi: mvm: handle device start failures during restartJohannes Berg
If the device fails during a restart, mac80211 now handles the situation better but we still have a little bit of cleanup to do in the driver - add the required code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwivi: mvm: BT Coex - properly set the priority of beaconsEmmanuel Grumbach
Since the new API allows multiple priorities, we need to properly set the beacon's prorities in the TX cmd associated to it. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: support extended beacon notificationDavid Spinadel
Use extended beacon notification when supported by FW. Set last beacon system time to AP or GO interface. System time of last beacon can be used to avoid TBTT overlapping between two interfaces, CSA and other uses. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: Introduce an API to set STA_FLG_DISABLE_TX flagAndrei Otcheretianski
Introduce new station flag STA_FLG_DISABLE_TX, which is modified with ADD_STA command. This flag, when set, disables tx to the STA. Provide an API (iwl_mvm_sta_modify_disable_tx) to modify this flag, which should be used in channel switch and immediate quiet flows. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: disable beacon filtering escape timer in d0i3Eliad Peller
The beacon filtering configuration in d0i3 currently uses the max value defined as 1024. However, with beacon interval of 100ms we end up with too-frequent wakeups. Instead, configure the escape timer to 0, asking the fw to disable it altogether. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - avoid the shared antenna for management framesEmmanuel Grumbach
If BT is active, we need to refrain from using the shared antenna. This logic is done in the firmware when we use the link quality tables. But for management frames, the rate is written in the Tx command by the driver. Hence the driver needs to make sure not use the shared antenna when BT is active for any frames that don't use the rate scale table such as management frames or multicast. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - add reduced Tx power thresholds to constantsEmmanuel Grumbach
This really belongs to the constants file. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - don't limit rate control if TTC is onEmmanuel Grumbach
When the firmware enables TxTxCorunning, we can lift the constaints on the rate control. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - allow MIMO in more casesEmmanuel Grumbach
We can Tx in MIMO rates when we are in TxTx Disallow mode just like we can when we are in Tight mode. Same if we are in 5Ghz regardless of the mode we are. Change the code to allow MIMO in these cases. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: BT Coex - allow to force the antenna allocationEmmanuel Grumbach
This can be used for testing. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: assure no overflows occur while reading otpLiad Kaufman
Just in case sizes change in the OTP without proper SW updating, an additional check is inserted when reading OTP sections to assure no overflows occur. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: nvm: update maximal parsed values in external nvmLiad Kaufman
Some of the maximum values of the parsed external NVM file in the B-step of the 8000 HW family were updated, so this updates these values. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: update trans->hw_rev 8000 hw family formatLiad Kaufman
The format of the CSR_HW_REV register has changed in 8000 HW family. To keep backwards compatibility, we store the value of this register as usual in trans->hw_rev, only we store it in the old format in this variable. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: fix bug in set_hw_address functionEran Harary
Don't use nvm_hw pointer if it is NULL. Print an error message if the MAC address isn't valid. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: dvm: add a force_cam module parameter to fully disable power savingAndy Lutomirski
iwldvm stalls are often blamed on power management. Add an option to force it all the way off. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: pcie: improve debugfs queue infoAndy Lutomirski
This adds need_update and write_actual to rx_queue and need_update and an HCMD indicator to tx_queue. On my card, rx_queue now looks like: read: 181 write: 180 write_actual: 176 need_update: 0 free_count: 40 closed_rb_num: 181 tx_queue now looks like: hwq 00: read=29 write=30 use=1 stop=0 need_update=0 hwq 01: read=0 write=0 use=1 stop=0 need_update=0 hwq 02: read=128 write=128 use=1 stop=0 need_update=0 hwq 03: read=0 write=0 use=1 stop=0 need_update=0 hwq 04: read=94 write=94 use=1 stop=0 need_update=0 HCMD hwq 05: read=0 write=0 use=0 stop=0 need_update=0 hwq 06: read=0 write=0 use=0 stop=0 need_update=0 hwq 07: read=0 write=0 use=0 stop=0 need_update=0 hwq 08: read=0 write=0 use=0 stop=0 need_update=0 hwq 09: read=0 write=0 use=0 stop=0 need_update=0 hwq 10: read=0 write=0 use=0 stop=0 need_update=0 hwq 11: read=0 write=0 use=0 stop=0 need_update=0 hwq 12: read=0 write=0 use=0 stop=0 need_update=0 hwq 13: read=0 write=0 use=0 stop=0 need_update=0 hwq 14: read=0 write=0 use=0 stop=0 need_update=0 hwq 15: read=0 write=0 use=0 stop=0 need_update=0 hwq 16: read=0 write=0 use=0 stop=0 need_update=0 hwq 17: read=0 write=0 use=0 stop=0 need_update=0 hwq 18: read=0 write=0 use=0 stop=0 need_update=0 hwq 19: read=0 write=0 use=0 stop=0 need_update=0 This may help with debugging queue stalls. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: pcie: log when waking the NIC for hcmd submission failsAndy Lutomirski
I've never seen this happen, but it's useful to rule it out. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: fix NVM channel attribute map.David Spinadel
Fix NVM channel attributes. Add indoor-only and GO Concurrent bits. Remove DFS channel bit which is overlapped with radar. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: fixes for 8000 NVM flowEran Harary
The nvm_file should be loaded by default for SDIO procucts only. Change the configuration accordingly. While at it, fix a typo in the device name. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: pcie: add firmware monitor capabilitiesEmmanuel Grumbach
This allows to use the firmware monitor. This capability uses a lot of contiguous memory (up to 64MB), so make its usage module parameter dependent. The driver will try to allocate as much contiguous memory as possible downgrading its requirements until the allocation succeeds. Dump this data into the fw-error dump file when an error happens. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: rename iwl_mvm_fw_error_next_dataEmmanuel Grumbach
This is not related to mvm. Rename to iwl_fw_error_next_data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: add device / firmware to fw-error-dump fileEmmanuel Grumbach
This can be useful later for parsing since the parsing may differ based on the device's family / bus. Also add the human readable version of the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: remove MCS32 support declarationEliad Peller
MCS32 is currently not supported, so don't declare support for it. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: don't use hardcoded num of scan channelsDavid Spinadel
Use num of scan channels as advertised by fw TLV. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach
2014-06-24iwlwifi: mvm: add back support for low-priority scanJohannes Berg
The low-priority scan feature can be useful, e.g. for OBSS scans (if those are required by the AP); add back support for it, restoring the maximum out time to the value it was for low-priority scan before that was removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: use ksize to memset scan_commandDavid Spinadel
Use ksize to get scan command size instead of calculating it, to avoid nasty bugs. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: bump API version for 8000 devicesEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: rework sched scan channel configurationEliad Peller
The current sched scan channel configuration code configures all the supported channels for scanning. However, this can result in SYSASSERT in some cases, when the configured channel is disabled. Instead, configure only the channels given in the req struct, and set the channel_count field appropriately. While on it, change the code to use channel->hw_value instead of recalculating the channel number. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v0.10.2 at 2024-10-21 10:39:08 (GMT)