summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-16ALSA: add Studio Evolution SE6X supportClemens Ladisch
Add a driver for an embedded sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16ALSA: oxygen: add XIO2001 initializationClemens Ladisch
Configure the XIO2001 bridge on PCI Express cards so that it does less needless prefetching. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16ALSA: oxygen: add support for third analog inputClemens Ladisch
Make it possible for cards to have three stereo analog input pairs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16ALSA: oxygen: do not create useless S/PDIF controlsClemens Ladisch
Cards without S/PDIF output do not need those controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-15ALSA: hda - Fix typo in hda_controller.cMasanari Iida
This patch fix spelling typo in hda_controller.c. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-15ALSA: hda - Select INPUT for Realtek HD-audio codecTakashi Iwai
The commit commit [33f4acd3b214: ALSA: hda - Enable mic mute hotkey and LEDs for an HP machine] introduced a quirk for a HP machine involving with the input event handling. Although the relevant code is protected via IS_ENABLED(CONFIG_INPUT), this doesn't suffice when the audio driver is built in while the input is module. As an easy workaround, this patch forcibly selects CONFIG_INPUT in Kconfig. This shouldn't be a practical problem since CONFIG_INPUT is almost mandatory for all systems. Also, this allows to remove the ugly ifdefs in the code. Fixes: 33f4acd3b214 ('ALSA: hda - Enable mic mute hotkey and LEDs for an HP machine') Acked-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-15sound/oss: use current->state helpersDavidlohr Bueso
Call __set_current_state() instead of assigning the new state directly. These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping track of who changed the state. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-13ALSA: compress_driver.h: include sound/core.h explicitlyQais Yousef
Fixes the following compilation error: include/sound/compress_driver.h: In function ‘snd_compr_drain_notify’: include/sound/compress_driver.h:177:2: error: implicit declaration of function ‘snd_BUG_ON’ [-Werror=implicit-function-declaration] if (snd_BUG_ON(!stream)) snd_BUG_ON() is defined in sound/core.h but the file is not included explicitly, so include it. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-13Merge tag 'topic/i915-hda-componentized-2015-01-12' of ↵Takashi Iwai
git://anongit.freedesktop.org/drm-intel into for-next
2015-01-12Merge branch 'topic/line6' into for-nextTakashi Iwai
2015-01-12ALSA: move line6 usb driver into sound/usbTakashi Iwai
Promote line6 driver from staging to sound/usb/line6 directory, and maintain through sound subsystem tree. This commit just moves the code and adapts Makefile / Kconfig. The further renames and misc cleanups will follow. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Make *_disconnect() functions staticChris Rorvick
Remove declarations from the header and move the definitions up in the source so they need not be forward declared. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Call *_disconnect() via pointerChris Rorvick
Which *_disconnect() to call on disconnect is known at initialization. Add a function pointer to the `usb_line6' struct and use to call into the appropriate logic instead of evaluating the conditional logic. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Call *_process_message() via pointerChris Rorvick
Which *_process_message() function (if any) to call when data is received is known at initialization. Add a function pointer to the `usb_line6' struct and use to call into the appropriate logic instead of evaluating the conditional logic for each message. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Pass *_process_message() `usb_line6' pointersChris Rorvick
Casting the `struct usb_line6' pointer at the call point makes the code difficult to read. This is substantially cleaned up by moving the cast into the callees. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Pass *_init() `usb_line6' pointersChris Rorvick
Casting the `struct usb_line6' pointer at the call point makes the code difficult to read. This is substantially cleaned up by moving the cast into the callees. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Move audio endpoints to propertiesChris Rorvick
The device type can now be used to determine the addresses of the audio endpoints for the interface. Drop the conditional logic and make these values properties. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Remove stale Pocket POD PCM endpointsChris Rorvick
Commit 1027f476f507 (staging: line6: sync with upstream) removed PCM from the Pocket POD capabilities but left the endpoint configuration. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Move control endpoints to propertiesChris Rorvick
The device type can now be used to determine the addresses of the control endpoints for the interface. Drop the conditional logic and make these values properties. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Move altsetting to propertiesChris Rorvick
The device type can now be used to determine the altsetting for the interface. Drop the conditional logic and make this value a property. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Filter on UX2 interfacesChris Rorvick
The driver only supports interface 0 of the TonePort UX2 and POD Studio UX2 devices. Use the device table to filter on this. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Filter on Pocket POD interfaceChris Rorvick
The driver only supports interface 1 of the Pocket POD. Use the device table to filter on this. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Split out POD HD500 interfacesChris Rorvick
The driver uses a different altsetting depending on the interface. Add device type entries for each of these. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Split out PODxt Live interfacesChris Rorvick
The PODxt Live device has both a POD and a Variax interface. Add device type entries for each of these. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: List out capabilities individuallyChris Rorvick
The `LINE6_CAP_CTRL_PCM_HW' macro combines three capabilities to save horizontal space when defining the properties entries. Now that these are no longer limited to single lines this is not such a concern. Specify capabilities individually when defining each property for better clarity. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Use explicit indexes when defining propertiesChris Rorvick
Specify the index of the properties entry explicitly to define this structure more robustly. Also, drop the `L6PROP' macro in favor of initializing each member explicitly on its own line since horizontal space is limited and more attributes will be added later. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Rename capability macrosChris Rorvick
Including "BIT" in the macro name is pointless. Replace with "CAP" to provide some context for what its value represents. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Remove useless commentsChris Rorvick
Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Remove idVendor and idProduct macrosChris Rorvick
These are now only used to build the device table. Each entry in this table is already clearly documented as to what device it maps to so the macros become unnecessary indirection. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Key off of device typeChris Rorvick
The driver currently uses the device's idProduct as input to several switch statements. In some cases this is not sufficiently granular and the interface number must be taken into account. Store the device type in `usb_line6' and key off of it instead. New types can then be added that map to specific interfaces on the device so that this conditional logic can be flattened out. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Index properties array with device typeChris Rorvick
The current logic uses the index of the matched entry from the device table as an offset to the corresponding properties entry. The values of the new `line6_device_type' enum are ordered such that they can be used as an index into either of these arrays. Drop the device entry lookup logic and use the device type (via the .driver_info member) instead. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Define a device type enumChris Rorvick
Define an enum containing the supported devices and associate each entry in the device table to the respective value. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Cleanup device tableChris Rorvick
Wrap USB_DEVICE to avoid repeating the Line 6 vendor ID. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Remove unsupported X3 devicesChris Rorvick
Support for these devices appears to have never been completed. Remove them from the device table along with a minimal amount of supporting code. Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Remove line6_pod_transmit_paramter()Chris Rorvick
This function was no longer used as of commit 2807904441d4 (staging: line6: drop MIDI parameter sysfs attrs). Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: Remove `device_bit' from propertiesChris Rorvick
The `device_bit' member was no longer used as of commit 2807904441d4 (staging: line6: drop MIDI parameter sysfs attrs). Signed-off-by: Chris Rorvick <chris@rorvick.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12Staging: line6: remove spaces before commas.Jonas Lundqvist
Fix three space prohibited errors in pcm.h found by checkpatch.pl. Signed-off-by: Jonas Lundqvist <jonas@gannon.se> Reviewed-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12staging: line6: toneport.c: Fix for possible null pointer dereferenceRickard Strandqvist
The NULL check was done to late, and there it was a risk of a possible null pointer dereference. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12ALSA: rme*: Use snd_pcm_format_tTakashi Iwai
Fix sparse warnings below by using snd_pcm_format_t properly: sound/pci/rme32.c:682:60: sparse: incorrect type in argument 2 (different base types) sound/pci/rme96.c:1006:69: sparse: incorrect type in argument 2 (different base types) ..... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12ALSA: log emu8000 DRAM size at level INFODavid Flater
Detected sound font memory goes unreported unless the kernel was built with ALSA debugging enabled. Elevate that to a pr_info. Signed-off-by: David Flater <dave@flaterco.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12ALSA: fix emu8000 DRAM sizing for AWE64 ValueDavid Flater
Applicable to any kernel since 2013: The special case added in commit 1338fc97d07a did not handle the possibility that the address space on an AWE64 Value would wrap around at 512 KiB. That is what it does, so the memory is still not detected on those cards. Fix that with a logic clean-up that eliminates the need for a special case. Signed-off-by: David Flater <dave@flaterco.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-12drm/i915: remove unused power_well/get_cdclk_freq apiImre Deak
After switching to using the component interface this API isn't needed any more. v2-3: unchanged v4: - move the removal of i915_powerwell.h to this patch (Takashi) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-12ALSA: hda: add component supportImre Deak
Register a component master to be used to interface with the i915 driver. This is meant to replace the current interface which is based on module symbol lookups. Note that currently we keep the existing behavior and pin the i915 module while the hda driver is loaded. Using the component interface allows us to remove this dependency once support for dynamically enabling / disabling the HDMI functionality is added to the driver. v2: - change roles between the hda and i915 components (Daniel) v3: - rename display_component to audio_component (Daniel) v4: - move removal of i915_powerwell.h from this patch to the next (Takashi) - request_module fails if module support isn't enabled, so ignore any error it returns and depend on the following NULL check of the component ops (Takashi) - change over to using dev_* instead of pr_* (Takashi) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-12ALSA: hda: pass intel_hda to all i915 interface functionsImre Deak
chip is already passed to most of the i915 interface functions. Unify the interface by passing intel_hda instead of chip and passing it to all functions. Passing intel_hda instead of chip makes more sense since this is an intel specific interface. Also in an upcoming patch we will use intel_hda in all of these functions so by passing intel_hda we can save on some pointer casts from chip to intel_hda. This will be needed by an upcoming patch adding component support. No functional change. v2-3: unchanged v4: - pass intel_hda instead of chip Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-12ALSA: hda: export struct hda_intelImre Deak
This struct will be needed by the component code added in an upcoming patch, so export it into a new hda_intel.h file. At the same time also merge hda_i915.h into this new header, there is no reason to keep two separate intel specific header file. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-12drm/i915: add component supportImre Deak
Register a component to be used to interface with the snd_hda_intel driver. This is meant to replace the same interface that is currently based on module symbol lookup. v2: - change roles between the hda and i915 components (Daniel) - add the implementation to a new file (Jani) - use better namespacing (Jani) v3: - move the implementation to intel_audio.c (Daniel) - rename display_component to audio_component (Daniel) - add kerneldoc (Daniel) v4: - run forgotten git rm i915_component.c (Jani) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-12drm/i915: add dev_to_i915 helperImre Deak
This will be needed by later patches, so factor it out. No functional change. v2: - s/dev_to_i915_priv/dev_to_i915/ (Jani) - don't use the helper in i915_pm_suspend (Chris) - simplify the helper (Chris) v3: - remove redundant upcasting in the helper (Daniel) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-11linux 3.19-rc4Linus Torvalds
2015-01-11Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Three small fixes from over the Christmas period, and wiring up the new execveat syscall for ARM" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region ARM: 8249/1: mm: dump: don't skip regions ARM: wire up execveat syscall
2015-01-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix with certain odd memory mappings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso: Use asm volatile in __getcpu x86/build: Clean auto-generated processor feature files x86: Fix mkcapflags.sh bash-ism x86: Fix step size adjustment during initial memory mapping x86_64, vdso: Fix the vdso address randomization algorithm
generated by cgit v0.10.2 at 2024-10-22 17:42:10 (GMT)