summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-14mwifiex: rename function mwifiex_is_ba_stream_availBing Zhao
The old function name sounds like checking for existing BA stream. The function actually checks if we have room for creating new BA stream or not. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14mwifiex: remove unused function parametersAmitkumar Karwar
Some function parameters become useless after previous cleanup changes. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14mwifiex: remove redundant "return" at end of void functionYogesh Ashok Powar
The return statement at the last line of a void function is not necessary. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14mwifiex: cleanup ioctl wait queue and abstraction layerAmitkumar Karwar
1) remove mwifiex_alloc_fill_wait_queue() and mwifiex_request_ioctl() 2) avoid dynamic allocation of wait queue 3) remove unnecessary mwifiex_error_code macros that were used mainly by the wait queue status code 4) remove some abstraction functions 5) split mwifiex_prepare_cmd() to mwifiex_send_cmd_async() and mwifiex_send_sync() to handle asynchronous and synchronous commands respectively Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath5k: disable 5 GHz support for the dualband PHY chip on dual-radio AR5312Felix Fietkau
There are two variants of AR5312 dual-band devices, one single-radio and the other one dual-radio. On the dual-radio board, the first MAC only supports 5 GHz, even though it has a dual-band PHY. The 2.4 GHz part of this phy is used in pass-through mode, connecting the second MAC with the second PHY. Disable 2.4 GHz for the first MAC on an AR5312, but only if the board configuration indicates a dual-radio device. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath5k: fix the EEPROM check for hw AES crypto supportFelix Fietkau
EEPROM version 5.0 adds a new field for disabling AES support, having an older version means that AES is present. This patch fixes hw AES crypto support on AR5312 boards, which have an older EEPROM version. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath5k: add a new bus op for reading the mac addressFelix Fietkau
On AHB, the calibration data usually does not contain a valid MAC address, the correct MAC address is stored in the board config. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath: unshare struct ath_bus_ops between ath5k and ath9kFelix Fietkau
This struct is not used in any common code, and moving it out of the ath header makes it easier to add more driver specific ops. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath5k: disable 5 GHz support if a 2.4 GHz radio is detectedFelix Fietkau
On a dual-radio dual-band AR5312 device, the calibration data is shared between the 5 GHz and the 2.4 GHz radio/MAC. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath9k: Fix improper beacon slot selection in IBSSRajkumar Manoharan
Request a re-configuration of Beacon related timers on the receipt of the first Beacon frame has to be set only for station mode. Setting beacon sync for IBSS is causing wrong beacon slot selection on beacon generation. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath9k: avoid using trinary operator w/ TX_STAT_INCJohn W. Linville
Otherwise, you get this: CC [M] drivers/net/wireless/ath/ath9k/hif_usb.o drivers/net/wireless/ath/ath9k/hif_usb.c: In function ‘ath9k_skb_queue_complete’: drivers/net/wireless/ath/ath9k/hif_usb.c:230:12: error: expected expression before ‘do’ make[2]: *** [drivers/net/wireless/ath/ath9k/hif_usb.o] Error 1 make[1]: *** [drivers/net/wireless/ath/ath9k] Error 2 make: *** [drivers/net/wireless/ath/] Error 2 The TX_STAT_INC macro should probably be changed to accomodate such usage, although using a trinary operator in place of an if-else seems questionable to me anyway. Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Sujith Manoharan <Sujith.Manoharan@Atheros.com>
2011-04-13mac80211: Allocate new mesh path and portal tables before taking lockscozybit Inc
It is unnecessary to hold the path table resize lock while allocating a new table. Allocate first and take lock later. This resolves a soft-lockup: [ 293.385799] BUG: soft lockup - CPU#0 stuck for 61s! [kworker/u:3:744] (...) [ 293.386049] Call Trace: [ 293.386049] [<c119fd04>] do_raw_read_lock+0x26/0x29 [ 293.386049] [<c14b2982>] _raw_read_lock+0x8/0xa [ 293.386049] [<c148c178>] mesh_path_add+0xb7/0x24e [ 293.386049] [<c148b98d>] ? mesh_path_lookup+0x1b/0xa6 [ 293.386049] [<c148ded5>] hwmp_route_info_get+0x276/0x2fd [ 293.386049] [<c148dfb6>] mesh_rx_path_sel_frame+0x5a/0x5d9 [ 293.386049] [<c102667d>] ? update_curr+0x1cf/0x1d7 [ 293.386049] [<c148b45a>] ieee80211_mesh_rx_queued_mgmt+0x60/0x67 [ 293.386049] [<c147c374>] ieee80211_iface_work+0x1f0/0x258 (...) Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Enable AP and P2P modesSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add detailed firmware statisticsSujith Manoharan
New debugfs files: <debugfs_root>/ath9k_htc/<phy#>/tgt_int_stats <debugfs_root>/ath9k_htc/<phy#>/tgt_tx_stats <debugfs_root>/ath9k_htc/<phy#>/tgt_rx_stats Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Use helper routines for transmissionSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Use separate URB pool for management framesSujith Manoharan
Beacon transmission needs to involve as little latency as possible after receiving a SWBA event from the target. Since packets are buffered to use TX stream mode, beacon frames sometimes gets queued up and are not sent out immediately. Fix this by decoupling management frame transmission from the normal data path and send them out immediately. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a timer to cleanup WMI eventsSujith Manoharan
Occasionally, a WMI event would arrive ahead of the TX URB completion handler. Discarding these events would exhaust the available TX slots, so handle them by running a timer cleaning up such events. Also, timeout packets for which TX completion events have not arrived. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a debugfs file showing endpoint statusSujith Manoharan
Location: ath9k_htc/phy#/queue Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a debugfs file to dump TX slot informationSujith Manoharan
Location: ath9k_htc/phy#/slot Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add support for TX completionSujith Manoharan
Now that the infrastructure is in place, process WMI TX status events and complete packets. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Drain packets on station removalSujith Manoharan
When a station entry is removed, there could still be pending packets destined for that station in the HIF layer. Sending these to the target is not necessary, so drain them in the driver itself. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Optimize HTC start/stop APISujith Manoharan
There is no point in looping over all the endpoints, since the HIF layer uses the start/stop APIs only for the TX pipe. Simplify the API accordingly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Drain pending TX frames properlySujith Manoharan
When doing a channel set or a reset operation the pending frames queued up for transmission have to be flushed and sent to mac80211. Fixing this has to be done in two separate steps: * Flush queued frames and kill the URB TX completion handler. * Complete all the frames that in the TX pending queue. This patch adds proper support for draining and all the callsites namely, channel change/reset/idle/stop are fixed. A separate queue is used for handling failed frames. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Use helper functions for TX processingSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add TX slotsSujith Manoharan
Maintain a bitmap of slots for transmission and update the cookie field for every packet with the slot value. This value would be used for matching packets when TX completion processing is added. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Move endpoint header parsing to TX taskletSujith Manoharan
There is no need to do endpoint header removal in the ISR. Also, this is needed when TX slot management is added later on. Use a helper function to strip the driver header. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Introduce new HTC APISujith Manoharan
A new routine that takes an endpoint explicitly is introduced. The normal htc_send() now retrieves the endpoint from the packet's private data. This would be useful in TX completion when the endpoint ID would be required. While at it, use a helper function to map the queue to endpoint. Data/mgmt/beacon packets use htc_send(), while WMI comamnds pass the endpoint to HTC. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Fix TX queue managementSujith Manoharan
Handle queue start/stop properly by maintaining a counter to check if the pending frame count has exceeded the threshold. Otherwise, packets would be dropped needlessly. While at it, use a simple flag to track queue status and use helper functions too. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Increase URB count for REG_IN pipeSujith Manoharan
Using a single URB for receiving WMI events is insufficient, increase it to 64 to not lose WMI events in high throughput situations. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a new WMI event WMI_TXSTATUS_EVENTIDSujith Manoharan
This event will be generated by the target for packet completions. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Sync MGMT/DATA packet headers with firmwareSujith Manoharan
Add a new cookie field that would be filled by the host. This can be used to match the TX status WMI event with the appropriate packet. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Reduce TX queue sizeSujith Manoharan
The current max queue length of 1024 is quite large and unnecessary. 256 suffices well enough even for high throughput situations. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Move TX specific stuff to a separate structureSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Remove unused WMI_WLAN_TXCOMP_EVENTIDSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Sync struct ath9k_htc_cap_target with FWSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Sync struct ath9k_htc_target_vif with FWSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Sync struct ath9k_htc_target_sta with FWSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Use SKB's private area for TX parametersSujith Manoharan
For all packets sent through the USB_WLAN_TX_PIPE endpoint, the private area of the SKB's tx_info can be used to store driver-specific information. For packets sent through USB_REG_OUT_PIPE, this will not make a difference since they are routed through a separate routine that doesn't access the private region. This would help in situations where TX information is required in the URB callback. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Remove unused WMI commandsSujith Manoharan
WMI_TGT_TXQ_ENABLE_CMDID WMI_HOST_ATTACH WMI_DEBUG_INFO_CMDID WMI_BEACON_UPDATE_CMDID WMI_RESET_CMDID WMI_RX_LINK_CMDID WMI_STOP_DMA_RECV_CMDID Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Fix RX length checkSujith Manoharan
The length of the received SKB could be equal to HTC_RX_FRAME_HEADER_SIZE in case of packets with phy/crc errors, in which case they are dropped without being processed. Fix this check so that the error counters are updated correctly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add RX error statisticsSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Move debug code to a separate fileSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Queue WMI eventsSujith Manoharan
Use a queue to handle WMI events and schedule a tasklet to process the events. This fixes the race between the WMI event ISR and the SWBA tasklet when the arrival of WMI events in quick succession could overwrite the SWBA data before the tasklet from a previous iteration could have been scheduled. Also, drain the WMI queue properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Fix beacon miss under heavy loadSujith Manoharan
Transmission of beacons becomes erratic when TX load is high, since the latency involved in the generation of a SWBA interrupt on the target to the actual sending of a beacon is quite high for USB devices. Fix this by adjusting the beacon response time. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Handle buffered frames in AP modeSujith Manoharan
Use the CAB endpoint to send buffered multicast or broadcast frames after each SWBA event. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Configure the beacon queueSujith Manoharan
Set operating parameters (cwmin, cwmax) for the beacon queue in AP mode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add TSF adjust capabilitySujith Manoharan
In multi-interface mode, beacons/probe responses that are sent out must have their timestamp field updated. Calculate the TSF adjustment value for each beaconing interface and set it in the frame properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add beacon slotsSujith Manoharan
Beacon transmission is now handled through a slot mechanism. This allows multiple beaconing interfaces to be be present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Fix WMI and beacon headerSujith Manoharan
Match the beacon header with that of the firmware. Also, the firmware reports the TSF for an SWBA, so store it. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a WMI command to get the firmware versionSujith Manoharan
Also, update the wiphy information and use the correct device pointer when registering. This would fix ethtool. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-11-11 02:03:09 (GMT)