summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-16V4L/DVB (11632): gspca - m5602-s5k83a: Reset the v4l2 ctrl cache upon sensor ↵Erik Andrén
init Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11631): gspca - m5602: Remove useless error checkErik Andrén
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11630): gspca - s5k83a: Add resolution annotationsErik Andrén
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11629): gspca - m5602-s5k83a: Move some init code aroundErik Andrén
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11628): gspca - m5602-s5k83a: Remove more initErik Andrén
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11624): cx18: Toggle the AI1 mux when changing the ↵Andy Walls
CX18_AUDIO_ENABLE register Toggle the AI1 mux when changing the CX18_AUDIO_ENABLE register. It's hard to reliably tell when we have written to this register successfully unless we change some bits we know we can read back. The AI mux bits always read back what we wrote to them, so force them to toggle whenever we have to write to the register, so we can tell we wrote to the register successfully. This change was prompted by users experiencing broadcast audio decoding problems after the cx18 module loads for the first time. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11623): cx18: Verify cx18-av-core digitizer firmware loads correctlyAndy Walls
Add code to verify the cx18-av-core digitizer firmware loads correctly. The verification function reads back and compares the firmware bytes loaded into the A/V core. The result of the verification is only used to log a message in the system log. This change was prompted by users with multiple card setups that have problems with broadcast audio decoding the first time the cx18 module is loaded. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11622): cx18: Allow IVTV format VBI insertion in MPEG-2 SVCD and ↵Andy Walls
DVD streams Both the MPEG-2 SVCD stream format and the MPEG-2 DVD stream format should use an MPEG-2 PS container. This makes it safe to stuff IVTV Private Stream 1 VBI packets in these stream types using the existing cx18 driver routines. Reported-by: Helen Buus <mythtv@hbuus.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11620): cx18: Increment version due to significant buffer handling ↵Andy Walls
changes Version bump from 1.1.0 to 1.2.0 Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11619): cx18: Simplify the work handler for outgoing mailbox commandsAndy Walls
Simplify the way outgoing work handler gets scheduled to send empty buffers back to the firmware for use. Also reduced the memory required for scheduling this outgoing work, by using a single, per stream work object. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11618): cx18: Convert per stream mutex locks to per queue spin locksAndy Walls
To avoid sleeps in providing buffers to user space and in handling incoming buffers from the capture unit, converted the per stream mutex for locking queues to 3 spin locks. There is now a spin lock per queue to increase concurrency when moving buffers around. Also simplified queue manipulations and buffer handling of incoming buffers of data from the capture unit. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11617): cx18: Set up to wait for a one-shot response before sending ↵Andy Walls
a firmware cmd When sending an outgoing firmware command, prepare to wait before we raise the interrupt, so we don't miss the wake_up() on the acknowledgment. When waiting for the acknowledgement, there is no need to loop around schedule(), as there will only be one interrupt, and hence one wake_up(), issued. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11616): cx18: Add a work queue for deferring empty buffer handoffs ↵Andy Walls
to the firmware This change defers sending all CX18_CPU_DE_SET_MDL commands, for a stream with an ongoing capture, by adding a work queue to handle sending such commands when needed. This prevents any sleeps, caused by notifying the firmware of new usable buffers, when a V4L2 application read() is being satisfied or when an incoming buffer is processed by the cx18-NN-in work queue thread. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11615): cx18: Rename the work queue to "in_work_queue"Andy Walls
Rename the work queue to "in_work_queue" to indicate it is handling incoming mailbox commands. This is preparation for adding a work queue for handling deferrable outgoing mailbox commands. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11613): pxa_camera: Documentation of the FSMRobert Jarzmik
After DMA redesign, the pxa_camera dynamic behaviour should be documented so that future contributors understand how it works, and improve it. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11611): soc-camera: link host drivers after clientsGuennadi Liakhovetski
With the transition of soc-camera to become a platform driver and to the v4l2-subdev framework the initialisation order becomes important. In case of a static build clients (i2c) drivers have to be available when host drivers are probed. Moving host drivers down in the Makefile achieves the desired order. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11610): soc-camera: simplify register access routines in multiple ↵Guennadi Liakhovetski
sensor drivers Register access routines only need the I2C client, not the soc-camera device context. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11609): soc-camera: remove an extra device generation from struct ↵Guennadi Liakhovetski
soc_camera_host Make camera devices direct children of host platform devices, move the inheritance management into the soc_camera.c core driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11608): soc-camera: host-driver cleanupGuennadi Liakhovetski
Embed struct soc_camera_host in platform-specific per host instance objects instead of allocating them statically in drivers, use platform_[gs]et_drvdata consistently, use resource_size(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11607): soc-camera: add a free_bus method to struct soc_camera_linkGuennadi Liakhovetski
Currently pcm990 camera bus-width management functions request a GPIO and never free it again. With this approach the GPIO extender driver cannot be unloaded once camera drivers have been loaded, also unloading theb i2c-pxa bus driver produces errors, because the GPIO extender driver cannot unregister properly. Another problem is, that if camera drivers are once loaded before the GPIO extender driver, the platform code marks the GPIO unavailable and only a reboot helps to recover. Adding an explicit free_bus method and using it in mt9m001 and mt9v022 drivers fixes these problems. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11604): saa7134: split Behold`s card entries to properly identify ↵Dmitri Belimov
the model Split Beholdr`s cards to correct models. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11567): saa7134: Added support for AVerMedia Cardbus PlusOldřich Jedlička
Here comes the full support for AVerMedia Cardbus Plus (E501R) - including remote control. TV, Composite and FM radio tested, I don't have S-Video to test. I've figured out that the radio works only with xtal frequency 13MHz. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11442): saa7134: BZ#7524: Add AVerTV Studio 507UA supportAndy Shevchenko
[mchehab@redhat.com: Fix merge conflicts and CodingStyle issues] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11605): patch: s2255drv: code cleanupDean Anderson
This patch does: - remove unused structure items. - define Response values; - change Driver revision printk. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11601): stv090x: update demodulator capabilitiesAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11600): budget: Use Continuous clockAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11599): S2-1600: Use budget driver instead of budged-ciAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11598): stv090x: fix missing wakeup in initAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11597): stv090x: fixes read_status to return 0 in case of no errorAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11596): stv090x: fixes some register definitionsAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11595): stv090x: fixes a few bugsAndreas Regel
This patch fixes: * Cut revision was read too late * Missing increment * wrong return value * mismatched entries Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11594): stv090x: Fix incorrect TSMODE usageAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11593): stv090x: Fix RolloffAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11592): stv6110x: Fix read bugAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11591): stv090x: code simplificationManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11590): stv090x: code simplificationManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11589): stv090x: code simplificationManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11588): stv090x: support > 60MSPS, simplify Srate calculationManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11587): stv090x: set DiSEqC frequency to 22kHzManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11586): stv090x: switch i/p ADC as well during Power managementManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11585): stv090x: fix incorrectly used modeAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11584): stv090x: add tone burst controlAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11583): isl6423: Various fixes to use external modulationAndreas Regel
Use external modulation Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11582): stv090x: fix Undocumented RegistersManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11581): stv090x and stv6110x: fix repeater level setup and ref clockManu Abraham
* Reference clock was unused * Fix missing repeater level setup Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11580): budget-ci: Fix incorrect default CLOCK setupAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: MAnu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11579): Initial go at TT S2-1600Manu Abraham
[mchehab@redhat.com: fix compilation when the new drivers aren't selected] Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11574): uvcvideo: fill reserved fields with zero of VIDIOC_QUERYMENUMárton Németh
When querying menu items with VIDIOC_QUERYMENU the reserved field is not set to zero as required by V4L2 API revision 0.24 [1]. Add this fill. The patch was tested with v4l-test 0.11 [2] with CNF7129 webcam found on EeePC 901. References: [1] V4L2 API specification, revision 0.24 http://v4l2spec.bytesex.org/spec/r13317.htm#V4L2-QUERYMENU [2] v4l-test: Test environment for Video For Linux Two API http://v4l-test.sourceforge.net/ [Modified by Laurent Pinchart] Use u32 instead of __u32 in non-exported kernel code. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11573): uvcvideo: Prevent invormation loss with removing implicit ↵Márton Németh
casting The uvcvideo driver supports only one input, which is input 0. For all other input index the return value shall be EINVAL. This patch fixes the problem when the value 0x80000000 was incorrectly casted and treated as a zero value. The patch was tested with v4l-test 0.10 [2] with CNF7129 webcam found on EeePC 901. References: [1] V4L2 API specification, revision 0.24 http://v4l2spec.bytesex.org/spec/r11217.htm [2] v4l-test: Test environment for Video For Linux Two API http://v4l-test.sourceforge.net/ [Modified by Laurent Pinchart] Invalid input value (u32)-1 would be accepted due to integer overflow. Make sure the driver rejects it and returns -EINVAL. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11571): Add Elgato EyeTV DTT deluxe to dibcom driverArmin Schenker
This patch introduces support for DVB-T for the following dibcom based card: Elgato EyeTV DTT deluxe (USB-ID: 0fd9:0020) Signed-off-by: Armin Schenker <sar@snafu.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v0.10.2 at 2024-11-05 06:41:57 (GMT)