| Age | Commit message (Collapse) | Author |
|---|
|
commit b0a5a9589decd07db755d6a8d9c0910d96ff7992 upstream.
Current ext4 quota should always "usage enabled" if the
quota feautre is enabled. But in ext4_orphan_cleanup(), it
turn quotas off directly (used for the older journaled
quota), so we cannot turn it on again via "quotaon" unless
umount and remount ext4.
Simple reproduce:
mkfs.ext4 -O project,quota /dev/vdb1
mount -o prjquota /dev/vdb1 /mnt
chattr -p 123 /mnt
chattr +P /mnt
touch /mnt/aa /mnt/bb
exec 100<>/mnt/aa
rm -f /mnt/aa
sync
echo c > /proc/sysrq-trigger
#reboot and mount
mount -o prjquota /dev/vdb1 /mnt
#query status
quotaon -Ppv /dev/vdb1
#output
quotaon: Cannot find mountpoint for device /dev/vdb1
quotaon: No correct mountpoint specified.
This patch add check for journaled quotas to avoid incorrect
quotaoff when ext4 has quota feautre.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed differently upstream as commit 2d97591ef43d ("crypto: af_alg - consolidation of duplicate code")
The SGL is MAX_SGL_ENTS + 1 in size. The last SG entry is used for the
chaining and is properly updated with the sg_chain invocation. During
the filling-in of the initial SG entries, sg_mark_end is called for each
SG entry. This is appropriate as long as no additional SGL is chained
with the current SGL. However, when a new SGL is chained and the last
SG entry is updated with sg_chain, the last but one entry still contains
the end marker from the sg_mark_end. This end marker must be removed as
otherwise a walk of the chained SGLs will cause a NULL pointer
dereference at the last but one SG entry, because sg_next will return
NULL.
The patch only applies to all kernels up to and including 4.13. The
patch 2d97591ef43d0587be22ad1b0d758d6df4999a0b added to 4.14-rc1
introduced a complete new code base which addresses this bug in
a different way. Yet, that patch is too invasive for stable kernels
and was therefore not marked for stable.
Fixes: 8ff590903d5fc ("crypto: algif_skcipher - User-space interface for skcipher operations")
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e652399edba99a5497f0d80f240c9075d3b43493 upstream.
Version 5 CCPs have some new requirements for XTS-AES: the type field
must be specified, and the key requires 512 bits, with each part
occupying 256 bits and padded with zeroes.
Signed-off-by: Gary R Hook <ghook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2cfa58259f4b65b33ebe8f167019a1f89c6c3289 upstream.
Implement fused multiply-add with correct accuracy.
Fused multiply-add operation has better accuracy than respective
sequential execution of multiply and add operations applied on the
same inputs. This is because accuracy errors accumulate in latter
case.
This patch implements fused multiply-add with the same accuracy
as it is implemented in hardware, using 128-bit intermediate
calculations.
One test case example (raw bits) that this patch fixes:
MADDF.D fd,fs,ft:
fd = 0x00000ca000000000
fs = ft = 0x3f40624dd2f1a9fc
Fixes: e24c3bec3e8e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1df ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Signed-off-by: Douglas Leung <douglas.leung@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16891/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3b8e1eb27c523e32b6a8aa7ec8ac4754456af57 upstream.
Implement fused multiply-add with correct accuracy.
Fused multiply-add operation has better accuracy than respective
sequential execution of multiply and add operations applied on the
same inputs. This is because accuracy errors accumulate in latter
case.
This patch implements fused multiply-add with the same accuracy
as it is implemented in hardware, using 64-bit intermediate
calculations.
One test case example (raw bits) that this patch fixes:
MADDF.S fd,fs,ft:
fd = 0x22575225
fs = ft = 0x3727c5ac
Fixes: e24c3bec3e8e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1df ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Signed-off-by: Douglas Leung <douglas.leung@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16890/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ae11c0619973ffd73a496308d8a1cb5e1a353737 upstream.
Fix definition and usage of "maddf_flags" enumeration. Avoid duplicate
definition and apply more common capitalization.
This patch does not change any scenario. It just makes MADDF and
MSUBF emulation code more readable and easier to maintain, and
hopefully prevents future bugs as well.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16889/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7cf64ce4d37f1b4f44365fcf77f565d523819dcd upstream.
Fix the cases of <MADDF|MSUBF>.<D|S> when any of two multiplicands is
+0 or -0, and the third input is also +0 or -0. Depending on the signs
of inputs, certain special cases must be handled.
A relevant example:
MADDF.S fd,fs,ft:
If fs contains +0.0, ft contains -0.0, and fd contains 0.0, fd is
going to contain +0.0 (without this patch, it used to contain -0.0).
Fixes: e24c3bec3e8e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1df ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16888/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0c64fe6348687f0e1cea9a608eae9d351124a73a upstream.
Fix the cases of <MADDF|MSUBF>.<D|S> when any of two multiplicands is
infinity. The correct behavior in such cases is affected by the nature
of third input. Cases of addition of infinities with opposite signs
and subtraction of infinities with same signs may arise and must be
handles separately. Also, the value od flags argument (that determines
whether the instruction is MADDF or MSUBF) affects the outcome.
Relevant examples:
MADDF.S fd,fs,ft:
If fs contains +inf, ft contains +inf, and fd contains -inf, fd is
going to contain indef (without this patch, it used to contain
-inf).
MSUBF.S fd,fs,ft:
If fs contains +inf, ft contains 1.0, and fd contains +0.0, fd is
going to contain -inf (without this patch, it used to contain +inf).
Fixes: e24c3bec3e8e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1df ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Signed-off-by: Douglas Leung <douglas.leung@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16887/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e840be6e7057757befc3581e1699e30fe7f0dd51 upstream.
Fix the cases of <MADDF|MSUBF>.<D|S> when any of three inputs is any
NaN. Correct behavior of <MADDF|MSUBF>.<D|S> fd, fs, ft is following:
- if any of inputs is sNaN, return a sNaN using following rules: if
only one input is sNaN, return that one; if more than one input is
sNaN, order of precedence for return value is fd, fs, ft
- if no input is sNaN, but at least one of inputs is qNaN, return a
qNaN using following rules: if only one input is qNaN, return that
one; if more than one input is qNaN, order of precedence for
return value is fd, fs, ft
The previous code contained correct handling of some above cases, but
not all. Also, such handling was scattered into various cases of
"switch (CLPAIR(xc, yc))" statement, and elsewhere. With this patch,
this logic is placed in one place, and "switch (CLPAIR(xc, yc))" is
significantly simplified.
A relevant example:
MADDF.S fd,fs,ft:
If fs contains qNaN1, ft contains qNaN2, and fd contains qNaN3, fd
is going to contain qNaN3 (without this patch, it used to contain
qNaN1).
Fixes: e24c3bec3e8e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1df ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16886/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ddbfff7429a75d954bf5bdff9f2222bceb4c236a upstream.
If accumulator value is zero, just return the value of previously
calculated product. This brings logic in MADDF/MSUBF implementation
closer to the logic in ADD/SUB case.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: James.Hogan@imgtec.com
Cc: Paul.Burton@imgtec.com
Cc: Raghu.Gandham@imgtec.com
Cc: Leonid.Yegoshin@imgtec.com
Cc: Douglas.Leung@imgtec.com
Cc: Petar.Jovanovic@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16512/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 304bfe473e70523e591fb1c9223289d355e0bdcb upstream.
Fix following special cases for MINA>.<D|S>:
- if one of the inputs is zero, and the other is subnormal, normal,
or infinity, the value of the former should be returned (that is,
a zero).
- if one of the inputs is infinity, and the other input is normal,
or subnormal, the value of the latter should be returned.
The previous implementation's logic for such cases was incorrect - it
appears as if it implements MAXA, and not MINA instruction.
A relevant example:
MINA.S fd,fs,ft:
If fs contains 100.0, and ft contains 0.0, fd is going to contain
0.0 (without this patch, it used to contain 100.0).
Fixes: a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16885/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3444c4eb534c20e44f0d6670b34263efaf8b531f upstream.
Fix the value returned by <MAXA|MINA>.<D|S> fd,fs,ft, if both inputs
are infinite. The previous implementation returned always the value
contained in ft in such cases. The correct behavior is specified
in Mips instruction set manual and is as follows:
fs ft MAXA MINA
---------------------------------
inf inf inf inf
inf -inf inf -inf
-inf inf inf -inf
-inf -inf -inf -inf
A relevant example:
MAXA.S fd,fs,ft:
If fs contains +inf, and ft contains -inf, fd is going to contain
+inf (without this patch, it used to contain -inf).
Fixes: a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16884/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a41b3b441508ae63b1a9ec699ec94065739eb60 upstream.
Fix the value returned by <MAXA|MINA>.<D|S>, if the inputs are normal
fp numbers of the same absolute value, but opposite signs.
A relevant example:
MAXA.S fd,fs,ft:
If fs contains -3.0, and ft contains +3.0, fd is going to contain
+3.0 (without this patch, it used to contain -3.0).
Fixes: a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16883/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aabf5cf02e22ebc4e541adf835910f388b6c3e65 upstream.
Fix the value returned by <MAX|MIN>.<D|S>, if both inputs are negative
normal fp numbers. The previous logic did not take into account that
if both inputs have the same sign, there should be separate treatment
of the cases when both inputs are negative and when both inputs are
positive.
A relevant example:
MAX.S fd,fs,ft:
If fs contains -5.0, and ft contains -7.0, fd is going to contain
-5.0 (without this patch, it used to contain -7.0).
Fixes: a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16882/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15560a58bfd4ff82cdd16b2270d4ef9b06d2cc4d upstream.
Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S>, if both inputs
are zeros. The right behavior in such cases is stated in instruction
reference manual and is as follows:
fs ft MAX MIN MAXA MINA
---------------------------------------------
0 0 0 0 0 0
0 -0 0 -0 0 -0
-0 0 0 -0 0 -0
-0 -0 -0 -0 -0 -0
Prior to this patch, some of the above cases were yielding correct
results. However, for the sake of code consistency, all such cases
are rewritten in this patch.
A relevant example:
MAX.S fd,fs,ft:
If fs contains +0.0, and ft contains -0.0, fd is going to contain
+0.0 (without this patch, it used to contain -0.0).
Fixes: a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e78bf0dc4789bdea1453595ae89e8db65918e22e upstream.
Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S> fd,fs,ft, if both
inputs are quiet NaNs. The <MAX|MAXA|MIN|MINA>.<D|S> specifications
state that the returned value in such cases should be the quiet NaN
contained in register fs.
A relevant example:
MAX.S fd,fs,ft:
If fs contains qNaN1, and ft contains qNaN2, fd is going to contain
qNaN1 (without this patch, it used to contain qNaN2).
Fixes: a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16880/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 697c5d8a36768b36729533fb44622b35d56d6ad0 upstream.
Similar to other Gigabyte laptops, the touchpad on P57 requires a
keyboard reset to detect Elantech touchpad correctly.
BugLink: https://bugs.launchpad.net/bugs/1594214
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79d2c8bede2c93f9432d7da0bc2f76a195c90fc0 upstream.
The touchpad in the Asus laptop models X505BA/BP and X542BA/BP is
unresponsive after suspend/resume. The following error appears during
resume:
i2c_hid i2c-ELAN1300:00: failed to reset device.
The problem here is that i2c_hid does not notice the interrupt being
generated at this point, because the GPIO is no longer configured
for interrupts.
Fix this by saving pinctrl-amd pin registers during suspend and
restoring them at resume time.
Based on code from pinctrl-intel.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a5a90a2a477b86a3dc2eaa5a706db9bfdd647ca upstream.
Sergey noticed a small but fatal mistake in __tty_insert_flip_char,
leading to an oops in an interrupt handler when using any serial
port.
The problem is that I accidentally took the tty_buffer pointer
before calling __tty_buffer_request_room(), which replaces the
buffer. This moves the pointer lookup to the right place after
allocating the new buffer space.
Fixes: 979990c62848 ("tty: improve tty_insert_flip_char() fast path")
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 065ea0a7afd64d6cf3464bdd1d8cd227527e2045 upstream.
While working on improving the fast path of tty_insert_flip_char(),
I noticed that by calling tty_buffer_request_room(), we needlessly
move to the separate flag buffer mode for the tty, even when all
characters use TTY_NORMAL as the flag.
This changes the code to call __tty_buffer_request_room() with the
correct flag, which will then allocate a regular buffer when it rounds
out of space but no special flags have been used. I'm guessing that
this is the behavior that Peter Hurley intended when he introduced
the compacted flip buffers.
Fixes: acc0f67f307f ("tty: Halve flip buffer GFP_ATOMIC memory consumption")
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 979990c6284814617d8f2179d197f72ff62b5d85 upstream.
kernelci.org reports a crazy stack usage for the VT code when CONFIG_KASAN
is enabled:
drivers/tty/vt/keyboard.c: In function 'kbd_keycode':
drivers/tty/vt/keyboard.c:1452:1: error: the frame size of 2240 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
The problem is that tty_insert_flip_char() gets inlined many times into
kbd_keycode(), and also into other functions, and each copy requires 128
bytes for stack redzone to check for a possible out-of-bounds access on
the 'ch' and 'flags' arguments that are passed into
tty_insert_flip_string_flags as a variable-length string.
This introduces a new __tty_insert_flip_char() function for the slow
path, which receives the two arguments by value. This completely avoids
the problem and the stack usage goes back down to around 100 bytes.
Without KASAN, this is also slightly better, as we don't have to
spill the arguments to the stack but can simply pass 'ch' and 'flag'
in registers, saving a few bytes in .text for each call site.
This should be backported to linux-4.0 or later, which first introduced
the stack sanitizer in the kernel.
Fixes: c420f167db8c ("kasan: enable stack instrumentation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79e25959403e6a79552db28a87abed34de32a1df upstream.
Commit eea40b8f624f ("infiniband: call ipv6 route lookup via the stub
interface") introduced a regression in address resolution when connecting
to IPv6 destination addresses. The old code called ip6_route_output(),
while the new code calls ipv6_stub->ipv6_dst_lookup(). The two are almost
the same, except that ipv6_dst_lookup() also calls ip6_route_get_saddr()
if the source address is in6addr_any.
This means that the test of ipv6_addr_any(&fl6.saddr) now never succeeds,
and so we never copy the source address out. This ends up causing
rdma_resolve_addr() to fail, because without a resolved source address,
cma_acquire_dev() will fail to find an RDMA device to use. For me, this
causes connecting to an NVMe over Fabrics target via RoCE / IPv6 to fail.
Fix this by copying out fl6.saddr if ipv6_addr_any() is true for the original
source address passed into addr6_resolve(). We can drop our call to
ipv6_dev_get_saddr() because ipv6_dst_lookup() already does that work.
Fixes: eea40b8f624 ("infiniband: call ipv6 route lookup via the stub interface")
Signed-off-by: Roland Dreier <roland@purestorage.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2a596fc9d974bb040eda9ab70bf8756fcaaa6afe upstream.
The drm_driver lastclose callback is called when the last userspace
DRM client has closed. Call drm_fbdev_cma_restore_mode to restore
the fbdev console otherwise the fbdev console will stop working.
Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Tested-by: Olliver Schinagl <oliver@schinagl.nl>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[net147@gmail.com: Backport to 4.9, minor context change]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b0ef650bd0f820e922fcc42f1985d4621ae19cf upstream.
Section 9.7.7.2.5 of the 1.3 IBTA spec clearly says that receive
credits should never apply to RDMA write.
qib and hfi1 were doing that. The following situation will result
in a QP hang:
- A prior SEND or RDMA_WRITE with immmediate consumed the last
credit for a QP using RC receive buffer credits
- The prior op is acked so there are no more acks
- The peer ULP fails to post receive for some reason
- An RDMA write sees that the credits are exhausted and waits
- The peer ULP posts receive buffers
- The ULP posts a send or RDMA write that will be hung
The fix is to avoid the credit test for the RDMA write operation.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5accbb0dfae36d8d36cd882096943c98d5ede15 upstream.
When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.
Fix the problem by creating __orangefs_set_acl() function that does not
call posix_acl_update_mode() and use it when inheriting ACLs. That
prevents SGID bit clearing and the mode has been properly set by
posix_acl_create() anyway.
Fixes: 073931017b49d9458aa351605b43a7e34598caef
CC: stable@vger.kernel.org
CC: Mike Marshall <hubcap@omnibond.com>
CC: pvfs2-developers@beowulf-underground.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4855e4a7f29d6d10b0b9c84e189c770c9a94e91e upstream.
There is race between page freeing and unreserved highatomic.
CPU 0 CPU 1
free_hot_cold_page
mt = get_pfnblock_migratetype
set_pcppage_migratetype(page, mt)
unreserve_highatomic_pageblock
spin_lock_irqsave(&zone->lock)
move_freepages_block
set_pageblock_migratetype(page)
spin_unlock_irqrestore(&zone->lock)
free_pcppages_bulk
__free_one_page(mt) <- mt is stale
By above race, a page on CPU 0 could go non-highorderatomic free list
since the pageblock's type is changed. By that, unreserve logic of
highorderatomic can decrease reserved count on a same pageblock severak
times and then it will make mismatch between nr_reserved_highatomic and
the number of reserved pageblock.
So, this patch verifies whether the pageblock is highatomic or not and
decrease the count only if the pageblock is highatomic.
Link: http://lkml.kernel.org/r/1476259429-18279-3-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sangseok Lee <sangseok.lee@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed6473ddc704a2005b9900ca08e236ebb2d8540a upstream.
We want to use kthread_stop() in order to ensure the threads are
shut down before we tear down the nfs_callback_info in nfs_callback_down.
Tested-and-reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: bb6aeba736ba9 ("NFSv4.x: Switch to using svc_set_num_threads()...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Hudoba <kernel@jahu.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9e0d87680d689f1758185851c3da6eafb16e71e1 upstream.
Refactor to separate out the functions of starting and stopping threads
so that they can be used in other helpers.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-and-reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Hudoba <kernel@jahu.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit 3614364527daa870264f6dde77f02853cdecd02c upstream.
rt_cookie might be used uninitialized, fix this by
initializing it.
Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7bf7a193a90cadccaad21c5970435c665c40fe27 upstream.
Fix up all the compiler warnings that have crept in.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c72a18e46ebe0f09484cce8ebf847abdab58498 upstream.
In raid5, there are scenarios where some ios are deferred to a later
time, and some IO need a flush to complete. To make sure we make
progress with these IOs, we need to call the following functions:
flush_deferred_bios(conf);
r5l_flush_stripe_to_raid(conf->log);
Both of these functions are called in raid5d(), but missing in
raid5_do_work(). As a result, these functions are not called
when multi-threading (group_thread_cnt > 0) is enabled. This patch
adds calls to these function to raid5_do_work().
Note for stable branches:
r5l_flush_stripe_to_raid(conf->log) is need for 4.4+
flush_deferred_bios(conf) is only needed for 4.11+
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6c370590cfe0c36bcd62d548148aa65c984540b7 upstream.
In function xfs_test_remount_options(), kfree() is used to free memory
allocated by kmem_zalloc(). But it is better to use kmem_free().
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8353a814f2518dcfa79a5bb77afd0e7dfa391bb1 upstream.
Our loop in xfs_finish_page_writeback, which iterates over all buffer
heads in a page and then calls end_buffer_async_write, which also
iterates over all buffers in the page to check if any I/O is in flight
is not only inefficient, but also potentially dangerous as
end_buffer_async_write can cause the page and all buffers to be freed.
Replace it with a single loop that does the work of end_buffer_async_write
on a per-page basis.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd60687ee541ca3f6df8758f38e6f22f57c42a37 upstream.
Reject attempts to set XFLAGS that correspond to di_flags2 inode flags
if the inode isn't a v3 inode, because di_flags2 only exists on v3.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47c7d0b19502583120c3f396c7559e7a77288a68 upstream.
When calling into _xfs_log_force{,_lsn}() with a pointer
to log_flushed variable, log_flushed will be set to 1 if:
1. xlog_sync() is called to flush the active log buffer
AND/OR
2. xlog_wait() is called to wait on a syncing log buffers
xfs_file_fsync() checks the value of log_flushed after
_xfs_log_force_lsn() call to optimize away an explicit
PREFLUSH request to the data block device after writing
out all the file's pages to disk.
This optimization is incorrect in the following sequence of events:
Task A Task B
-------------------------------------------------------
xfs_file_fsync()
_xfs_log_force_lsn()
xlog_sync()
[submit PREFLUSH]
xfs_file_fsync()
file_write_and_wait_range()
[submit WRITE X]
[endio WRITE X]
_xfs_log_force_lsn()
xlog_wait()
[endio PREFLUSH]
The write X is not guarantied to be on persistent storage
when PREFLUSH request in completed, because write A was submitted
after the PREFLUSH request, but xfs_file_fsync() of task A will
be notified of log_flushed=1 and will skip explicit flush.
If the system crashes after fsync of task A, write X may not be
present on disk after reboot.
This bug was discovered and demonstrated using Josef Bacik's
dm-log-writes target, which can be used to record block io operations
and then replay a subset of these operations onto the target device.
The test goes something like this:
- Use fsx to execute ops of a file and record ops on log device
- Every now and then fsync the file, store md5 of file and mark
the location in the log
- Then replay log onto device for each mark, mount fs and compare
md5 of file to stored value
Cc: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <jbacik@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 742d84290739ae908f1b61b7d17ea382c8c0073a upstream.
Currently flag switching can be used to easily crash the kernel. Disable
the per-inode DAX flag until that is sorted out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2dd3d709fc4338681a3aa61658122fa8faa5a437 upstream.
The owner change bmbt scan that occurs during extent swap operations
does not handle ordered buffer failures. Buffers that cannot be
marked ordered must be physically logged so previously dirty ranges
of the buffer can be relogged in the transaction.
Since the bmbt scan may need to process and potentially log a large
number of blocks, we can't expect to complete this operation in a
single transaction. Update extent swap to use a permanent
transaction with enough log reservation to physically log a buffer.
Update the bmbt scan to physically log any buffers that cannot be
ordered and to terminate the scan with -EAGAIN. On -EAGAIN, the
caller rolls the transaction and restarts the scan. Finally, update
the bmbt scan helper function to skip bmbt blocks that already match
the expected owner so they are not reprocessed after scan restarts.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[darrick: fix the xfs_trans_roll call]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a5814bceea48ee1c57c4db2bd54b0c0246daf54a upstream.
Ordered buffers are used in situations where the buffer is not
physically logged but must pass through the transaction/logging
pipeline for a particular transaction. As a result, ordered buffers
are not unpinned and written back until the transaction commits to
the log. Ordered buffers have a strict requirement that the target
buffer must not be currently dirty and resident in the log pipeline
at the time it is marked ordered. If a dirty+ordered buffer is
committed, the buffer is reinserted to the AIL but not physically
relogged at the LSN of the associated checkpoint. The buffer log
item is assigned the LSN of the latest checkpoint and the AIL
effectively releases the previously logged buffer content from the
active log before the buffer has been written back. If the tail
pushes forward and a filesystem crash occurs while in this state, an
inconsistent filesystem could result.
It is currently the caller responsibility to ensure an ordered
buffer is not already dirty from a previous modification. This is
unclear and error prone when not used in situations where it is
guaranteed a buffer has not been previously modified (such as new
metadata allocations).
To facilitate general purpose use of ordered buffers, update
xfs_trans_ordered_buf() to conditionally order the buffer based on
state of the log item and return the status of the result. If the
bli is dirty, do not order the buffer and return false. The caller
must either physically log the buffer (having acquired the
appropriate log reservation) or push it from the AIL to clean it
before it can be marked ordered in the current transaction.
Note that ordered buffers are currently only used in two situations:
1.) inode chunk allocation where previously logged buffers are not
possible and 2.) extent swap which will be updated to handle ordered
buffer failures in a separate patch.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6fb10d6d22094bc4062f92b9ccbcee2f54033d04 upstream.
The extent swap operation currently resets bmbt block owners before
the inode forks are swapped. The bmbt buffers are marked as ordered
so they do not have to be physically logged in the transaction.
This use of ordered buffers is not safe as bmbt buffers may have
been previously physically logged. The bmbt owner change algorithm
needs to be updated to physically log buffers that are already dirty
when/if they are encountered. This means that an extent swap will
eventually require multiple rolling transactions to handle large
btrees. In addition, all inode related changes must be logged before
the bmbt owner change scan begins and can roll the transaction for
the first time to preserve fs consistency via log recovery.
In preparation for such fixes to the bmbt owner change algorithm,
refactor the bmbt scan out of the extent fork swap code to the last
operation before the transaction is committed. Update
xfs_swap_extent_forks() to only set the inode log flags when an
owner change scan is necessary. Update xfs_swap_extents() to trigger
the owner change based on the inode log flags. Note that since the
owner change now occurs after the extent fork swap, the inode btrees
must be fixed up with the inode number of the current inode (similar
to log recovery).
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99c794c639a65cc7b74f30a674048fd100fe9ac8 upstream.
Extent swap uses xfs_btree_visit_blocks() to fix up bmbt block
owners on v5 (!rmapbt) filesystems. The bmbt scan uses
xfs_btree_lookup_get_block() to read bmbt blocks which verifies the
current owner of the block against the parent inode of the bmbt.
This works during extent swap because the bmbt owners are updated to
the opposite inode number before the inode extent forks are swapped.
The modified bmbt blocks are marked as ordered buffers which allows
everything to commit in a single transaction. If the transaction
commits to the log and the system crashes such that recovery of the
extent swap is required, log recovery restarts the bmbt scan to fix
up any bmbt blocks that may have not been written back before the
crash. The log recovery bmbt scan occurs after the inode forks have
been swapped, however. This causes the bmbt block owner verification
to fail, leads to log recovery failure and requires xfs_repair to
zap the log to recover.
Define a new invalid inode owner flag to inform the btree block
lookup mechanism that the current inode may be invalid with respect
to the current owner of the bmbt block. Set this flag on the cursor
used for change owner scans to allow this operation to work at
runtime and during log recovery.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: bb3be7e7c ("xfs: check for bogus values in btree block headers")
Cc: stable@vger.kernel.org
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8dc518dfa7dbd079581269e51074b3c55a65a880 upstream.
Ordered buffers are attached to transactions and pushed through the
logging infrastructure just like normal buffers with the exception
that they are not actually written to the log. Therefore, we don't
need to log dirty ranges of ordered buffers. xfs_trans_log_buf() is
called on ordered buffers to set up all of the dirty state on the
transaction, buffer and log item and prepare the buffer for I/O.
Now that xfs_trans_dirty_buf() is available, call it from
xfs_trans_ordered_buf() so the latter is now mutually exclusive with
xfs_trans_log_buf(). This reflects the implementation of ordered
buffers and helps eliminate confusion over the need to log ranges of
ordered buffers just to set up internal log state.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9684010d38eccda733b61106765e9357cf436f65 upstream.
xfs_trans_log_buf() is responsible for logging the dirty segments of
a buffer along with setting all of the necessary state on the
transaction, buffer, bli, etc., to ensure that the associated items
are marked as dirty and prepared for I/O. We have a couple use cases
that need to to dirty a buffer in a transaction without actually
logging dirty ranges of the buffer. One existing use case is
ordered buffers, which are currently logged with arbitrary ranges to
accomplish this even though the content of ordered buffers is never
written to the log. Another pending use case is to relog an already
dirty buffer across rolled transactions within the deferred
operations infrastructure. This is required to prevent a held
(XFS_BLI_HOLD) buffer from pinning the tail of the log.
Refactor xfs_trans_log_buf() into a new function that contains all
of the logic responsible to dirty the transaction, lidp, buffer and
bli. This new function can be used in the future for the use cases
outlined above. This patch does not introduce functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e9385cc6fb7edf23702de33a2dc82965d92d9392 upstream.
Ordered buffers pass through the logging infrastructure without ever
being written to the log. The way this works is that the ordered
buffer status is transferred to the log vector at commit time via
the ->iop_size() callback. In xlog_cil_insert_format_items(),
ordered log vectors bypass ->iop_format() processing altogether.
Therefore it is unnecessary for xfs_buf_item_format() to handle
ordered buffers. Remove the unnecessary logic and assert that an
ordered buffer never reaches this point.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6453c65d3576bc3e602abb5add15f112755c08ca upstream.
xfs_buf_item_unlock() historically checked the dirty state of the
buffer by manually checking the buffer log formats for dirty
segments. The introduction of ordered buffers invalidated this check
because ordered buffers have dirty bli's but no dirty (logged)
segments. The check was updated to accommodate ordered buffers by
looking at the bli state first and considering the blf only if the
bli is clean.
This logic is safe but unnecessary. There is no valid case where the
bli is clean yet the blf has dirty segments. The bli is set dirty
whenever the blf is logged (via xfs_trans_log_buf()) and the blf is
cleared in the only place BLI_DIRTY is cleared (xfs_trans_binval()).
Remove the conditional blf dirty checks and replace with an assert
that should catch any discrepencies between bli and blf dirty
states. Refactor the old blf dirty check into a helper function to
be used by the assert.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a4f6cf6b2b6b60ec2a05a33a32e65caa4149aa2b upstream.
It checks a single flag and has one caller. It probably isn't worth
its own function.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f2e9ad212def50bcf4c098c6288779dd97fff0f0 upstream.
After xfs_ifree_cluster() finds an inode in the radix tree and verifies
that the inode number is what it expected, xfs_reclaim_inode() can swoop
in and free it. xfs_ifree_cluster() will then happily continue working
on the freed inode. Most importantly, it will mark the inode stale,
which will probably be overwritten when the inode slab object is
reallocated, but if it has already been reallocated then we can end up
with an inode spuriously marked stale.
In 8a17d7ddedb4 ("xfs: mark reclaimed inodes invalid earlier") we added
a second check to xfs_iflush_cluster() to detect this race, but the
similar RCU lookup in xfs_ifree_cluster() needs the same treatment.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 799ea9e9c59949008770aab4e1da87f10e99dbe4 upstream.
When we introduced the bmap redo log items, we set MS_ACTIVE on the
mountpoint and XFS_IRECOVERY on the inode to prevent unlinked inodes
from being truncated prematurely during log recovery. This also had the
effect of putting linked inodes on the lru instead of evicting them.
Unfortunately, we neglected to find all those unreferenced lru inodes
and evict them after finishing log recovery, which means that we leak
them if anything goes wrong in the rest of xfs_mountfs, because the lru
is only cleaned out on unmount.
Therefore, evict unreferenced inodes in the lru list immediately
after clearing MS_ACTIVE.
Fixes: 17c12bcd30 ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: viro@ZenIV.linux.org.uk
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d32311cf19bfb8c1d2b4601974ddd951f9cfd0b upstream.
In a filesystem without finobt, the Space manager selects an AG to alloc a new
inode, where xfs_dialloc_ag_inobt() will search the AG for the free slot chunk.
When the new inode is in the same AG as its parent, the btree will be searched
starting on the parent's record, and then retried from the top if no slot is
available beyond the parent's record.
To exit this loop though, xfs_dialloc_ag_inobt() relies on the fact that the
btree must have a free slot available, once its callers relied on the
agi->freecount when deciding how/where to allocate this new inode.
In the case when the agi->freecount is corrupted, showing available inodes in an
AG, when in fact there is none, this becomes an infinite loop.
Add a way to stop the loop when a free slot is not found in the btree, making
the function to fall into the whole AG scan which will then, be able to detect
the corruption and shut the filesystem down.
As pointed by Brian, this might impact performance, giving the fact we
don't reset the search distance anymore when we reach the end of the
tree, giving it fewer tries before falling back to the whole AG search, but
it will only affect searches that start within 10 records to the end of the tree.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e67d3d4246e5fbb0c7c700426d11241ca9c6f473 upstream.
Torn write detection and tail overwrite detection can shift the log
head and tail respectively in the event of CRC mismatch or
corruption errors. Add a high-level log recovery tracepoint to dump
the final log head/tail and make those values easily attainable in
debug/diagnostic situations.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
