summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-073w-9xxx: don't unmap bounce buffered commandsChristoph Hellwig
3w controller don't dma map small single SGL entry commands but instead bounce buffer them. Add a helper to identify these commands and don't call scsi_dma_unmap for them. Based on an earlier patch from James Bottomley. Fixes: 118c85 ("3w-9xxx: fix command completion race") Reported-by: Tóth Attila <atoth@atoth.sote.hu> Tested-by: Tóth Attila <atoth@atoth.sote.hu> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-07Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "This addresses a couple of issues found with RT, a broken initrd message in the console log and a simple performance fix for some MMC workloads. Summary: - A couple of locking fixes for RT kernels - Avoid printing bogus initrd warnings when initrd isn't present - Performance fix for random mmap file readahead - Typo fix" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: replace read_lock to rcu lock in call_break_hook arm64: Don't relocate non-existent initrd arm64: convert patch_lock to raw lock arm64: readahead: fault retry breaks mmap file read random detection arm64: debug: Fix typo in debug-monitors.c
2015-10-07Merge tag 'fbdev-fixes-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - fbdev: Minor fixes to broadsheetfb, fsl-diu-fb, mb862xxfb, tridentfb, omapfb - display-timing: Fix memory leak in error path * tag 'fbdev-fixes-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: of: fix memory leak fbdev: broadsheetfb: fix memory leak OMAPDSS: panel-sony-acx565akm: Export OF module alias information fbdev: omap2: connector-dvi: use of_get_i2c_adapter_by_node interface tridentfb: Fix set_lwidth on TGUI9440 and CYBER9320 tridentfb: fix hang on Blade3D with CONFIG_CC_OPTIMIZE_FOR_SIZE video: fbdev: mb862xx: Fix module autoload for OF platform driver video: fbdev: fsl: Fix the sleep function for FSL DIU module
2015-10-07Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - Fix build break on (at least) powerpc due to sample_reg_masks, not being available for linking. (Sukadev Bhattiprolu) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-07Merge remote-tracking branches 'asoc/fix/tlv320aic3x' and 'asoc/fix/wm8962' ↵Mark Brown
into asoc-linus
2015-10-07Merge remote-tracking branches 'asoc/fix/db1200', 'asoc/fix/dwc', ↵Mark Brown
'asoc/fix/imx-ssi', 'asoc/fix/maintainers', 'asoc/fix/rt5645', 'asoc/fix/sgtl5000' and 'asoc/fix/tas2552' into asoc-linus
2015-10-07perf tools: Fix build break on powerpc due to sample_reg_masksSukadev Bhattiprolu
perf_regs.c does not get built on Powerpc as CONFIG_PERF_REGS is false. So the weak definition for 'sample_regs_masks' doesn't get picked up. Adding perf_regs.o to util/Build unconditionally, exposes a redefinition error for 'perf_reg_value()' function (due to the static inline version in util/perf_regs.h). So use #ifdef HAVE_PERF_REGS_SUPPORT' around that function. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20150930182836.GA27858@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-07Merge tag 'regmap-fix-v4.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "A couple of fixes for the debugfs information on the register map, fixing issues with very small reads potentially causing underflows and wraparounds" * tag 'regmap-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: debugfs: Don't bother actually printing when calculating max length regmap: debugfs: Ensure we don't underflow when printing access masks
2015-10-07Merge tag 'spi-fix-v4.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of very minor fixes, one for error handling in the Davinci driver probe function and another making the Renesas sh-msiof DT binding documentation correspond to what's actually implemented" * tag 'spi-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sh-msiof: Match renesas,rx-fifo-size in DT bindings doc with driver spi: davinci: fix handling platform_get_irq result
2015-10-07Merge tag 'regulator-fix-v4.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two fixes here, one device specific fix for axp20x and a core fix for cases where one regulator is supplying another which broke probe deferral, substituting in a dummy regulator too aggressively" * tag 'regulator-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Handle probe deferral from DT when resolving supplies regulator: axp20x: Fix enable bit indexes for DCDC4 and DCDC5
2015-10-07video: of: fix memory leakSudip Mukherjee
If of_parse_display_timing() fails we are printing an error message and jumping to the error path but we missed freeing "dt". Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-10-07Merge remote-tracking branches 'spi/fix/davinci' and 'spi/fix/sh-msiof' into ↵Mark Brown
spi-linus
2015-10-07Merge branch 'strscpy' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull strscpy fixes from Chris Metcalf : "This patch series fixes up a couple of architecture issues where strscpy wasn't configured correctly (missing on h8300, duplicating local and asm-generic copies on powerpc and tile). It also adds a use of zero_bytemask() to the final store for strscpy to avoid writing uninitialized data to the destination. However, to make this work we had to add support for zero_bytemask() to the two architectures that didn't have it (alpha and tile), because they were providing their own local copies, but didn't provide the zero_bytemask() that was previously only required when building with CONFIG_DCACHE_WORD_ACCESS" [ Side note: there is still no actual users of strscpy except for the one preexisting use in arch/tile that predates the generic version. So this is all about fixing the infrastructure so that we eventually can start using it. - Linus ] * 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: strscpy: zero any trailing garbage bytes in the destination word-at-a-time.h: support zero_bytemask() on alpha and tile word-at-a-time.h: fix some Kbuild files
2015-10-07Merge tag 'for-linus-20151006' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Brian Norris: "A few MTD fixes: - mxc_nand: a "refactoring only" change in 4.3-rc1 had some bad pointer (array) arithmetic. Fix that - sunxi_nand: - Fix an old list manipulation / memory management bug in the device release() code path - Correct a few mistakes in OOB write support" * tag 'for-linus-20151006' of git://git.infradead.org/linux-mtd: mxc_nand: fix copy_spare mtd: nand: sunxi: fix sunxi_nand_chips_cleanup() mtd: nand: sunxi: fix OOB handling in ->write_xxx() functions
2015-10-07Merge tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfixes: - Fix a use-after-free bug in the RPC/RDMA client - Fix a write performance regression - Fix up page writeback accounting - Don't try to reclaim unused state owners - Fix a NFSv4 nograce recovery hang - reset states to use open_stateid when returning delegation voluntarily - Fix a tracepoint NULL-pointer dereference" * tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix a tracepoint NULL-pointer dereference nfs4: reset states to use open_stateid when returning delegation voluntarily NFSv4: Fix a nograce recovery hang NFSv4.1: nfs4_opendata_check_deleg needs to handle NFS4_OPEN_CLAIM_DELEG_CUR_FH NFSv4: Don't try to reclaim unused state owners NFS: Fix a write performance regression NFS: Fix up page writeback accounting xprtrdma: disconnect and flush cqs before freeing buffers
2015-10-07Revert "fs: do not prefault sys_write() user buffer pages"Linus Torvalds
This reverts commit 998ef75ddb5709bbea0bf1506cd2717348a3c647. The commit itself does not appear to be buggy per se, but it is exposing a bug in ext4 (and Ted thinks ext3 too, but we solved that by getting rid of it). It's too late in the release cycle to really worry about this, even if Dave Hansen has a patch that may actually fix the underlying ext4 problem. We can (and should) revisit this for the next release. The problem is that moving the prefaulting later now exposes a special case with partially successful writes that isn't handled correctly. And the prefaulting likely isn't normally even that much of a performance issue - it looks like at least one reason Dave saw this in his performance tests is that he also ran them on Skylake that now supports the new SMAP code, which makes the normally very cheap user space prefaulting noticeably more expensive. Bisected-and-acked-by: Ted Ts'o <tytso@mit.edu> Analyzed-and-acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-06NFS: Fix a tracepoint NULL-pointer dereferenceAnna Schumaker
Running xfstest generic/013 with the tracepoint nfs:nfs4_open_file enabled produces a NULL-pointer dereference when calculating fileid and filehandle of the opened file. Fix this by checking if state is NULL before trying to use the inode pointer. Reported-by: Olga Kornievskaia <aglo@umich.edu> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-10-06strscpy: zero any trailing garbage bytes in the destinationChris Metcalf
It's possible that the destination can be shadowed in userspace (as, for example, the perf buffers are now). So we should take care not to leak data that could be inspected by userspace. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-10-06word-at-a-time.h: support zero_bytemask() on alpha and tileChris Metcalf
Both alpha and tile needed implementations of zero_bytemask. The alpha version is untested. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-10-06word-at-a-time.h: fix some Kbuild filesChris Metcalf
arch/tile added word-at-a-time.h after the patch that added generic-y entries; the generic-y entry is now stale. arch/h8300 is newer than the generic-y patch for word-at-a-time.h, and needs a generic-y entry. arch/powerpc seems to have gotten a generic-y entry by mistake in the first patch; this change removes it. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-10-06arm64: replace read_lock to rcu lock in call_break_hookYang Shi
BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 0, irqs_disabled(): 128, pid: 342, name: perf 1 lock held by perf/342: #0: (break_hook_lock){+.+...}, at: [<ffffffc0000851ac>] call_break_hook+0x34/0xd0 irq event stamp: 62224 hardirqs last enabled at (62223): [<ffffffc00010b7bc>] __call_rcu.constprop.59+0x104/0x270 hardirqs last disabled at (62224): [<ffffffc0000fbe20>] vprintk_emit+0x68/0x640 softirqs last enabled at (0): [<ffffffc000097928>] copy_process.part.8+0x428/0x17f8 softirqs last disabled at (0): [< (null)>] (null) CPU: 0 PID: 342 Comm: perf Not tainted 4.1.6-rt5 #4 Hardware name: linux,dummy-virt (DT) Call trace: [<ffffffc000089968>] dump_backtrace+0x0/0x128 [<ffffffc000089ab0>] show_stack+0x20/0x30 [<ffffffc0007030d0>] dump_stack+0x7c/0xa0 [<ffffffc0000c878c>] ___might_sleep+0x174/0x260 [<ffffffc000708ac8>] __rt_spin_lock+0x28/0x40 [<ffffffc000708db0>] rt_read_lock+0x60/0x80 [<ffffffc0000851a8>] call_break_hook+0x30/0xd0 [<ffffffc000085a70>] brk_handler+0x30/0x98 [<ffffffc000082248>] do_debug_exception+0x50/0xb8 Exception stack(0xffffffc00514fe30 to 0xffffffc00514ff50) fe20: 00000000 00000000 c1594680 0000007f fe40: ffffffff ffffffff 92063940 0000007f 0550dcd8 ffffffc0 00000000 00000000 fe60: 0514fe70 ffffffc0 000be1f8 ffffffc0 0514feb0 ffffffc0 0008948c ffffffc0 fe80: 00000004 00000000 0514fed0 ffffffc0 ffffffff ffffffff 9282a948 0000007f fea0: 00000000 00000000 9282b708 0000007f c1592820 0000007f 00083914 ffffffc0 fec0: 00000000 00000000 00000010 00000000 00000064 00000000 00000001 00000000 fee0: 005101e0 00000000 c1594680 0000007f c1594740 0000007f ffffffd8 ffffff80 ff00: 00000000 00000000 00000000 00000000 c1594770 0000007f c1594770 0000007f ff20: 00665e10 00000000 7f7f7f7f 7f7f7f7f 01010101 01010101 00000000 00000000 ff40: 928e4cc0 0000007f 91ff11e8 0000007f call_break_hook is called in atomic context (hard irq disabled), so replace the sleepable lock to rcu lock, replace relevant list operations to rcu version and call synchronize_rcu() in unregister_break_hook(). And, replace write lock to spinlock in {un}register_break_hook. Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-06arm64: Don't relocate non-existent initrdMark Rutland
When booting a kernel without an initrd, the kernel reports that it moves -1 bytes worth, having gone through the motions with initrd_start equal to initrd_end: Moving initrd from [4080000000-407fffffff] to [9fff49000-9fff48fff] Prevent this by bailing out early when the initrd size is zero (i.e. we have no initrd), avoiding the confusing message and other associated work. Fixes: 1570f0d7ab425c1e ("arm64: support initrd outside kernel linear map") Cc: Mark Salter <msalter@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-06sched/core: Fix TASK_DEAD race in finish_task_switch()Peter Zijlstra
So the problem this patch is trying to address is as follows: CPU0 CPU1 context_switch(A, B) ttwu(A) LOCK A->pi_lock A->on_cpu == 0 finish_task_switch(A) prev_state = A->state <-. WMB | A->on_cpu = 0; | UNLOCK rq0->lock | | context_switch(C, A) `-- A->state = TASK_DEAD prev_state == TASK_DEAD put_task_struct(A) context_switch(A, C) finish_task_switch(A) A->state == TASK_DEAD put_task_struct(A) The argument being that the WMB will allow the load of A->state on CPU0 to cross over and observe CPU1's store of A->state, which will then result in a double-drop and use-after-free. Now the comment states (and this was true once upon a long time ago) that we need to observe A->state while holding rq->lock because that will order us against the wakeup; however the wakeup will not in fact acquire (that) rq->lock; it takes A->pi_lock these days. We can obviously fix this by upgrading the WMB to an MB, but that is expensive, so we'd rather avoid that. The alternative this patch takes is: smp_store_release(&A->on_cpu, 0), which avoids the MB on some archs, but not important ones like ARM. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> # v3.1+ Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: manfred@colorfullife.com Cc: will.deacon@arm.com Fixes: e4a52bcb9a18 ("sched: Remove rq->lock from the first half of ttwu()") Link: http://lkml.kernel.org/r/20150929124509.GG3816@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-06dm: fix request-based dm error reportingJunichi Nomura
end_clone_bio() is a endio callback for clone bio and should check and save the clone's bi_error for error reporting. However, 4246a0b63bd8 ("block: add a bi_error field to struct bio") changed the function to check the original bio's bi_error, which is 0. Without this fix, clone's error is ignored and reported to the original request as success. Thus data corruption will be observed. Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-10-06Merge tag 'for-linus-4.3b-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - Fix VM save performance regression with x86 PV guests - Make kexec work in x86 PVHVM guests (if Xen has the soft-reset ABI) - Other minor fixes. * tag 'for-linus-4.3b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen/p2m: hint at the last populated P2M entry x86/xen: Do not clip xen_e820_map to xen_e820_map_entries when sanitizing map x86/xen: Support kexec/kdump in HVM guests by doing a soft reset xen/x86: Don't try to write syscall-related MSRs for PV guests xen: use correct type for HYPERVISOR_memory_op()
2015-10-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Three bug fixes and an update to the default configuration" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/defconfig: set SCSI_DH=y s390/vtime: correct scaled cputime of partially idle CPUs s390/boot/decompression: disable floating point in decompressor s390/numa: use correct type for node_to_cpumask_map
2015-10-06BTRFS: support NFSv2 exportNeilBrown
The "fh_len" passed to ->fh_to_* is not guaranteed to be that same as that returned by encode_fh - it may be larger. With NFSv2, the filehandle is fixed length, so it may appear longer than expected and be zero-padded. So we must test that fh_len is at least some value, not exactly equal to it. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Sterba <dsterba@suse.cz>
2015-10-06Btrfs: open_ctree: Fix possible memory leakchandan
After reading one of chunk or tree root tree's root node from disk, if the root node does not have EXTENT_BUFFER_UPTODATE flag set, we fail to release the memory used by the root node. Fix this. Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
2015-10-06Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS fixes from Steve French: "Two fixes for problems pointed out by automated tools. Thanks PaX/grsecurity team and Dan Carpenter (and the Smatch tool)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] Update cifs version number [SMB3] Do not fall back to SMBWriteX in set_file_size error cases [SMB3] Missing null tcon check
2015-10-06x86/xen/p2m: hint at the last populated P2M entryDavid Vrabel
With commit 633d6f17cd91ad5bf2370265946f716e42d388c6 (x86/xen: prepare p2m list for memory hotplug) the P2M may be sized to accomdate a much larger amount of memory than the domain currently has. When saving a domain, the toolstack must scan all the P2M looking for populated pages. This results in a performance regression due to the unnecessary scanning. Instead of reporting (via shared_info) the maximum possible size of the P2M, hint at the last PFN which might be populated. This hint is increased as new leaves are added to the P2M (in the expectation that they will be used for populated entries). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org> # 4.0+
2015-10-06Merge tag 'renesas-fixes-for-v4.3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v4.3" from Simon Horman * Add Add CPG/MSTP Clock Domain for sound on r8a779[01] SoCs. This allows sound to work once again. * tag 'renesas-fixes-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain for sound ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain for sound
2015-10-06Merge tag 'sunxi-fixes-for-4.3' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner fixes for 4.3" from Maxime Ripard: Two patches, one that fixes one of the DT build, and the other raising the voltage of the lowest OPP of the A20 to remain within the SoC operating boundaries * tag 'sunxi-fixes-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: Fix Makefile target for sun4i-a10-itead-iteaduino-plus ARM: dts: sunxi: Raise minimum CPU voltage for sun7i-a20 to meet SoC specifications
2015-10-06Merge tag 'samsung-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v4.3" from Kukjin Kim: - fix invalid clock used for FIMD IOMMU - fix thermal boot issue smdk5250-smdk5250 - fix S2R on exynos4412 trats2 boards - fix LEDs on exynos5422-odroidxu3-common - fix booting of all 8 cores on exynos542x * tag 'samsung-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Fix wrong clock binding for sysmmu_fimd1_1 on exynos5420 ARM: dts: Fix bootup thermal issue on smdk5250 ARM: dts: add suspend opp to exynos4412 ARM: dts: Fix LEDs on exynos5422-odroidxu3 ARM: EXYNOS: reset Little cores when cpu is up
2015-10-06MAINTAINERS: Remove wm97xx entryMark Brown
Neither myself or Liam is especially interested in this driver any more and the devices are already covered by the general ex-Wolfson entry so just remove this. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
2015-10-06MIPS: Define ioremap_ucBen Hutchings
All architectures must now define ioremap_uc(), but MIPS currently only has ioremap_nocache(). Fixes: 4c73e8926623 ("arch/*/io.h: Add ioremap_uc() to all architectures") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11263/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-06Merge remote-tracking branch 'regulator/fix/axp20x' into regulator-linusMark Brown
2015-10-06Merge remote-tracking branch 'regulator/fix/core' into regulator-linusMark Brown
2015-10-06ASoC: tas2552: fix dBscale-min declarationAndreas Dannenberg
The minimum volume level for the TAS2552 (control register value 0x00) is -7dB however the driver declares it as -0.07dB. Running amixer before the patch reports: dBscale-min=-0.07dB,step=1.00dB,mute=0 Running amixer with the patch applied reports: dBscale-min=-7.00dB,step=1.00dB,mute=0 Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-10-05Btrfs: fix deadlock when finalizing block group creationFilipe Manana
Josef ran into a deadlock while a transaction handle was finalizing the creation of its block groups, which produced the following trace: [260445.593112] fio D ffff88022a9df468 0 8924 4518 0x00000084 [260445.593119] ffff88022a9df468 ffffffff81c134c0 ffff880429693c00 ffff88022a9df488 [260445.593126] ffff88022a9e0000 ffff8803490d7b00 ffff8803490d7b18 ffff88022a9df4b0 [260445.593132] ffff8803490d7af8 ffff88022a9df488 ffffffff8175a437 ffff8803490d7b00 [260445.593137] Call Trace: [260445.593145] [<ffffffff8175a437>] schedule+0x37/0x80 [260445.593189] [<ffffffffa0850f37>] btrfs_tree_lock+0xa7/0x1f0 [btrfs] [260445.593197] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0 [260445.593225] [<ffffffffa07eac44>] btrfs_lock_root_node+0x34/0x50 [btrfs] [260445.593253] [<ffffffffa07eff6b>] btrfs_search_slot+0x88b/0xa00 [btrfs] [260445.593295] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs] [260445.593324] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [260445.593351] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [260445.593394] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs] [260445.593427] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs] [260445.593459] [<ffffffffa0800964>] do_chunk_alloc+0x2a4/0x2e0 [btrfs] [260445.593491] [<ffffffffa0803815>] find_free_extent+0xa55/0xd90 [btrfs] [260445.593524] [<ffffffffa0803c22>] btrfs_reserve_extent+0xd2/0x220 [btrfs] [260445.593532] [<ffffffff8119fe5d>] ? account_page_dirtied+0xdd/0x170 [260445.593564] [<ffffffffa0803e78>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs] [260445.593597] [<ffffffffa080c9de>] ? btree_set_page_dirty+0xe/0x10 [btrfs] [260445.593626] [<ffffffffa07eb5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs] [260445.593654] [<ffffffffa07ebbff>] btrfs_cow_block+0x11f/0x1c0 [btrfs] [260445.593682] [<ffffffffa07ef8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs] [260445.593724] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs] [260445.593752] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [260445.593830] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [260445.593905] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs] [260445.593946] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs] [260445.593990] [<ffffffffa0815798>] btrfs_commit_transaction+0xa8/0xb40 [btrfs] [260445.594042] [<ffffffffa085abcd>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs] [260445.594089] [<ffffffffa082bc84>] btrfs_sync_file+0x294/0x350 [btrfs] [260445.594115] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0 [260445.594133] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180 [260445.594149] [<ffffffff8123e35d>] do_fsync+0x3d/0x70 [260445.594169] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110 [260445.594187] [<ffffffff8123e600>] SyS_fsync+0x10/0x20 [260445.594204] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71 This happened because the same transaction handle created a large number of block groups and while finalizing their creation (inserting new items and updating existing items in the chunk and device trees) a new metadata extent had to be allocated and no free space was found in the current metadata block groups, which made find_free_extent() attempt to allocate a new block group via do_chunk_alloc(). However at do_chunk_alloc() we ended up allocating a new system chunk too and exceeded the threshold of 2Mb of reserved chunk bytes, which makes do_chunk_alloc() enter the final part of block group creation again (at btrfs_create_pending_block_groups()) and attempt to lock again the root of the chunk tree when it's already write locked by the same task. Similarly we can deadlock on extent tree nodes/leafs if while we are running delayed references we end up creating a new metadata block group in order to allocate a new node/leaf for the extent tree (as part of a CoW operation or growing the tree), as btrfs_create_pending_block_groups inserts items into the extent tree as well. In this case we get the following trace: [14242.773581] fio D ffff880428ca3418 0 3615 3100 0x00000084 [14242.773588] ffff880428ca3418 ffff88042d66b000 ffff88042a03c800 ffff880428ca3438 [14242.773594] ffff880428ca4000 ffff8803e4b20190 ffff8803e4b201a8 ffff880428ca3460 [14242.773600] ffff8803e4b20188 ffff880428ca3438 ffffffff8175a437 ffff8803e4b20190 [14242.773606] Call Trace: [14242.773613] [<ffffffff8175a437>] schedule+0x37/0x80 [14242.773656] [<ffffffffa057ff07>] btrfs_tree_lock+0xa7/0x1f0 [btrfs] [14242.773664] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0 [14242.773692] [<ffffffffa0519c44>] btrfs_lock_root_node+0x34/0x50 [btrfs] [14242.773720] [<ffffffffa051ef6b>] btrfs_search_slot+0x88b/0xa00 [btrfs] [14242.773750] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [14242.773758] [<ffffffff811ef4a2>] ? kmem_cache_alloc+0x1d2/0x200 [14242.773786] [<ffffffffa0520ad1>] btrfs_insert_item+0x71/0xf0 [btrfs] [14242.773818] [<ffffffffa052f292>] btrfs_create_pending_block_groups+0x102/0x200 [btrfs] [14242.773850] [<ffffffffa052f96e>] do_chunk_alloc+0x2ae/0x2f0 [btrfs] [14242.773934] [<ffffffffa0532825>] find_free_extent+0xa55/0xd90 [btrfs] [14242.773998] [<ffffffffa0532c22>] btrfs_reserve_extent+0xc2/0x1d0 [btrfs] [14242.774041] [<ffffffffa0532e38>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs] [14242.774078] [<ffffffffa051a5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs] [14242.774118] [<ffffffffa051abff>] btrfs_cow_block+0x11f/0x1c0 [btrfs] [14242.774155] [<ffffffffa051e8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs] [14242.774194] [<ffffffffa0528021>] ? __btrfs_free_extent.isra.70+0x2e1/0xcb0 [btrfs] [14242.774235] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [14242.774274] [<ffffffffa051994a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [14242.774318] [<ffffffffa052c433>] __btrfs_run_delayed_refs+0xbb3/0x1020 [btrfs] [14242.774358] [<ffffffffa052f404>] btrfs_run_delayed_refs.part.78+0x74/0x280 [btrfs] [14242.774391] [<ffffffffa052f627>] btrfs_run_delayed_refs+0x17/0x20 [btrfs] [14242.774432] [<ffffffffa05be236>] commit_cowonly_roots+0x8d/0x2bd [btrfs] [14242.774474] [<ffffffffa059d07f>] ? __btrfs_run_delayed_items+0x1cf/0x210 [btrfs] [14242.774516] [<ffffffffa05adac3>] ? btrfs_qgroup_account_extents+0x83/0x130 [btrfs] [14242.774558] [<ffffffffa0544c40>] btrfs_commit_transaction+0x590/0xb40 [btrfs] [14242.774599] [<ffffffffa0589b9d>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs] [14242.774642] [<ffffffffa055ac54>] btrfs_sync_file+0x294/0x350 [btrfs] [14242.774650] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0 [14242.774657] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180 [14242.774663] [<ffffffff8123e35d>] do_fsync+0x3d/0x70 [14242.774669] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110 [14242.774675] [<ffffffff8123e600>] SyS_fsync+0x10/0x20 [14242.774681] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71 Fix this by never recursing into the finalization phase of block group creation and making sure we never trigger the finalization of block group creation while running delayed references. Reported-by: Josef Bacik <jbacik@fb.com> Fixes: 00d80e342c0f ("Btrfs: fix quick exhaustion of the system array in the superblock") Signed-off-by: Filipe Manana <fdmanana@suse.com>
2015-10-05Btrfs: update fix for read corruption of compressed and shared extentsFilipe Manana
My previous fix in commit 005efedf2c7d ("Btrfs: fix read corruption of compressed and shared extents") was effective only if the compressed extents cover a file range with a length that is not a multiple of 16 pages. That's because the detection of when we reached a different range of the file that shares the same compressed extent as the previously processed range was done at extent_io.c:__do_contiguous_readpages(), which covers subranges with a length up to 16 pages, because extent_readpages() groups the pages in clusters no larger than 16 pages. So fix this by tracking the start of the previously processed file range's extent map at extent_readpages(). The following test case for fstests reproduces the issue: seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { rm -f $tmp.* } # get standard environment, filters and checks . ./common/rc . ./common/filter # real QA test starts here _need_to_be_root _supported_fs btrfs _supported_os Linux _require_scratch _require_cloner rm -f $seqres.full test_clone_and_read_compressed_extent() { local mount_opts=$1 _scratch_mkfs >>$seqres.full 2>&1 _scratch_mount $mount_opts # Create our test file with a single extent of 64Kb that is going to # be compressed no matter which compression algo is used (zlib/lzo). $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 64K" \ $SCRATCH_MNT/foo | _filter_xfs_io # Now clone the compressed extent into an adjacent file offset. $CLONER_PROG -s 0 -d $((64 * 1024)) -l $((64 * 1024)) \ $SCRATCH_MNT/foo $SCRATCH_MNT/foo echo "File digest before unmount:" md5sum $SCRATCH_MNT/foo | _filter_scratch # Remount the fs or clear the page cache to trigger the bug in # btrfs. Because the extent has an uncompressed length that is a # multiple of 16 pages, all the pages belonging to the second range # of the file (64K to 128K), which points to the same extent as the # first range (0K to 64K), had their contents full of zeroes instead # of the byte 0xaa. This was a bug exclusively in the read path of # compressed extents, the correct data was stored on disk, btrfs # just failed to fill in the pages correctly. _scratch_remount echo "File digest after remount:" # Must match the digest we got before. md5sum $SCRATCH_MNT/foo | _filter_scratch } echo -e "\nTesting with zlib compression..." test_clone_and_read_compressed_extent "-o compress=zlib" _scratch_unmount echo -e "\nTesting with lzo compression..." test_clone_and_read_compressed_extent "-o compress=lzo" status=0 exit Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: Timofey Titovets <nefelim4ag@gmail.com>
2015-10-05Btrfs: send, fix corner case for reference overwrite detectionFilipe Manana
When the inode given to did_overwrite_ref() matches the current progress and has a reference that collides with the reference of other inode that has the same number as the current progress, we were always telling our caller that the inode's reference was overwritten, which is incorrect because the other inode might be a new inode (different generation number) in which case we must return false from did_overwrite_ref() so that its callers don't use an orphanized path for the inode (as it will never be orphanized, instead it will be unlinked and the new inode created later). The following test case for fstests reproduces the issue: seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { rm -fr $send_files_dir rm -f $tmp.* } # get standard environment, filters and checks . ./common/rc . ./common/filter # real QA test starts here _supported_fs btrfs _supported_os Linux _require_scratch _need_to_be_root send_files_dir=$TEST_DIR/btrfs-test-$seq rm -f $seqres.full rm -fr $send_files_dir mkdir $send_files_dir _scratch_mkfs >>$seqres.full 2>&1 _scratch_mount # Create our test file with a single extent of 64K. mkdir -p $SCRATCH_MNT/foo $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 64K" $SCRATCH_MNT/foo/bar \ | _filter_xfs_io _run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \ $SCRATCH_MNT/mysnap1 _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT \ $SCRATCH_MNT/mysnap2 echo "File digest before being replaced:" md5sum $SCRATCH_MNT/mysnap1/foo/bar | _filter_scratch # Remove the file and then create a new one in the same location with # the same name but with different content. This new file ends up # getting the same inode number as the previous one, because that inode # number was the highest inode number used by the snapshot's root and # therefore when attempting to find the a new inode number for the new # file, we end up reusing the same inode number. This happens because # currently btrfs uses the highest inode number summed by 1 for the # first inode created once a snapshot's root is loaded (done at # fs/btrfs/inode-map.c:btrfs_find_free_objectid in the linux kernel # tree). # Having these two different files in the snapshots with the same inode # number (but different generation numbers) caused the btrfs send code # to emit an incorrect path for the file when issuing an unlink # operation because it failed to realize they were different files. rm -f $SCRATCH_MNT/mysnap2/foo/bar $XFS_IO_PROG -f -c "pwrite -S 0xbb 0 96K" \ $SCRATCH_MNT/mysnap2/foo/bar | _filter_xfs_io _run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT/mysnap2 \ $SCRATCH_MNT/mysnap2_ro _run_btrfs_util_prog send $SCRATCH_MNT/mysnap1 -f $send_files_dir/1.snap _run_btrfs_util_prog send -p $SCRATCH_MNT/mysnap1 \ $SCRATCH_MNT/mysnap2_ro -f $send_files_dir/2.snap echo "File digest in the original filesystem after being replaced:" md5sum $SCRATCH_MNT/mysnap2_ro/foo/bar | _filter_scratch # Now recreate the filesystem by receiving both send streams and verify # we get the same file contents that the original filesystem had. _scratch_unmount _scratch_mkfs >>$seqres.full 2>&1 _scratch_mount _run_btrfs_util_prog receive -vv $SCRATCH_MNT -f $send_files_dir/1.snap _run_btrfs_util_prog receive -vv $SCRATCH_MNT -f $send_files_dir/2.snap echo "File digest in the new filesystem:" # Must match the digest from the new file. md5sum $SCRATCH_MNT/mysnap2_ro/foo/bar | _filter_scratch status=0 exit Reported-by: Martin Raiber <martin@urbackup.org> Fixes: 8b191a684968 ("Btrfs: incremental send, check if orphanized dir inode needs delayed rename") Signed-off-by: Filipe Manana <fdmanana@suse.com>
2015-10-05arm64: convert patch_lock to raw lockYang Shi
When running kprobe test on arm64 rt kernel, it reports the below warning: root@qemu7:~# modprobe kprobe_example BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 0, irqs_disabled(): 128, pid: 484, name: modprobe CPU: 0 PID: 484 Comm: modprobe Not tainted 4.1.6-rt5 #2 Hardware name: linux,dummy-virt (DT) Call trace: [<ffffffc0000891b8>] dump_backtrace+0x0/0x128 [<ffffffc000089300>] show_stack+0x20/0x30 [<ffffffc00061dae8>] dump_stack+0x1c/0x28 [<ffffffc0000bbad0>] ___might_sleep+0x120/0x198 [<ffffffc0006223e8>] rt_spin_lock+0x28/0x40 [<ffffffc000622b30>] __aarch64_insn_write+0x28/0x78 [<ffffffc000622e48>] aarch64_insn_patch_text_nosync+0x18/0x48 [<ffffffc000622ee8>] aarch64_insn_patch_text_cb+0x70/0xa0 [<ffffffc000622f40>] aarch64_insn_patch_text_sync+0x28/0x48 [<ffffffc0006236e0>] arch_arm_kprobe+0x38/0x48 [<ffffffc00010e6f4>] arm_kprobe+0x34/0x50 [<ffffffc000110374>] register_kprobe+0x4cc/0x5b8 [<ffffffbffc002038>] kprobe_init+0x38/0x7c [kprobe_example] [<ffffffc000084240>] do_one_initcall+0x90/0x1b0 [<ffffffc00061c498>] do_init_module+0x6c/0x1cc [<ffffffc0000fd0c0>] load_module+0x17f8/0x1db0 [<ffffffc0000fd8cc>] SyS_finit_module+0xb4/0xc8 Convert patch_lock to raw loc kto avoid this issue. Although the problem is found on rt kernel, the fix should be applicable to mainline kernel too. Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-05arm64: readahead: fault retry breaks mmap file read random detectionMark Salyzyn
This is the arm64 portion of commit 45cac65b0fcd ("readahead: fault retry breaks mmap file read random detection"), which was absent from the initial port and has since gone unnoticed. The original commit says: > .fault now can retry. The retry can break state machine of .fault. In > filemap_fault, if page is miss, ra->mmap_miss is increased. In the second > try, since the page is in page cache now, ra->mmap_miss is decreased. And > these are done in one fault, so we can't detect random mmap file access. > > Add a new flag to indicate .fault is tried once. In the second try, skip > ra->mmap_miss decreasing. The filemap_fault state machine is ok with it. With this change, Mark reports that: > Random read improves by 250%, sequential read improves by 40%, and > random write by 400% to an eMMC device with dm crypto wrapped around it. Cc: Shaohua Li <shli@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mark Salyzyn <salyzyn@android.com> Signed-off-by: Riley Andrews <riandrews@android.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-05arm64: debug: Fix typo in debug-monitors.cYang Shi
Fix comment typo: s/handers/handlers/ Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-05ALSA: synth: Fix conflicting OSS device registration on AWE32Takashi Iwai
When OSS emulation is loaded on ISA SB AWE32 chip, we get now kernel warnings like: WARNING: CPU: 0 PID: 2791 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x51/0x80() sysfs: cannot create duplicate filename '/devices/isa/sbawe.0/sound/card0/seq-oss-0-0' It's because both emux synth and opl3 drivers try to register their OSS device object with the same static index number 0. This hasn't been a big problem until the recent rewrite of device management code (that exposes sysfs at the same time), but it's been an obvious bug. This patch works around it just by using a different index number of emux synth object. There can be a more elegant way to fix, but it's enough for now, as this code won't be touched so often, in anyway. Reported-and-tested-by: Michael Shell <list1@michaelshell.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-05MIPS: UAPI: Ignore __arch_swab{16,32,64} when using MIPS16Yousong Zhou
Some GCC versions (e.g. 4.8.3) can incorrectly inline a function with MIPS32 instructions into another function with MIPS16 code [1], causing the assembler to genereate incorrect binary code or fail right away complaining about unrecognized opcode. In the case of __arch_swab{16,32}, when inlined by the compiler with flags `-mips32r2 -mips16 -Os', the assembler can fail with the following error. {standard input}:79: Error: unrecognized opcode `wsbh $2,$2' For performance concerns and to workaround the issue already existing in older compilers, just ignore these 2 functions when compiling with mips16 enabled. [1] Inlining nomips16 function into mips16 function can result in undefined builtins, https://gcc.gnu.org/bugzilla/show_bug.cgi?id=55777 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11241/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-05Revert "MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16."Yousong Zhou
This reverts commit e0d8b2ec532852d4b5aabcec3e7611848c32237d. For at least GCC 4.8.3, adding nomips16 function attribute still cannot prevent it from being inlined in mips16 context. So revert it first in preparation for a better workaround. [1] Inlining nomips16 function into mips16 function can result in undefined builtins, https://gcc.gnu.org/bugzilla/show_bug.cgi?id=55777 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11240/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-05mcb: Fix error handling in mcb_pci_probe()Alexey Khoroshilov
If a MCB PCI Carrier device is IO mapped insted of memory-mapped, the memory of the PCI device is still not unmapped. Also the patch adds deallocation of the bus if chameleon_parse_cells() fails. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04ALSA: hda - Disable power_save_node for IDT 92HD73xx chipsTakashi Iwai
The recent widget power saving introduced some unavoidable click noises on old IDT 92HD73xx chips while it still seems working on the compatible new chips. In the bugzilla, we tried lots of tests and workarounds, but they didn't help much. So, let's disable the feature for these specific chips as the least (but safest) fix. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104981 Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-04staging: speakup: fix speakup-r regressioncovici@ccs.covici.com
Here is a patch to make speakup-r work again. It broke in 3.6 due to commit 4369c64c79a22b98d3b7eff9d089196cd878a10a "Input: Send events one packet at a time) The problem was that the fakekey.c routine to fake a down arrow no longer functioned properly and putting the input_sync fixed it. Fixes: 4369c64c79a22b98d3b7eff9d089196cd878a10a Cc: stable <stable@vger.kernel.org> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: John Covici <covici@ccs.covici.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v0.10.2 at 2024-10-06 21:21:53 (GMT)