| Age | Commit message (Collapse) | Author |
|---|
|
Signing a module should only make it trusted by the specific kernel it
was built for, not anything else. If a module signing key is used for
multiple ABI-incompatible kernels, the modules need to include enough
version information to distinguish them.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Signing a module should only make it trusted by the specific kernel it
was built for, not anything else. Loading a signed module meant for a
kernel with a different ABI could have interesting effects.
Therefore, treat all signatures as invalid when a module is
force-loaded.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
While most of the locations where a kernel taint bit is set are accompanied
with a warning message, there are two which set their bits silently. If
the tainting module gets unloaded later on, it is almost impossible to tell
what was the reason for setting the flag.
Signed-off-by: Libor Pechacek <lpechacek@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
[linux-4.5-rc4/kernel/module.c:1692]: (style) Redundant condition: attr.test.
'!attr.test || (attr.test && attr.test(mod))' is equivalent to '!attr.test ||
attr.test(mod)'
This code was added like this ten years ago, in c988d2b284549
"modules: add version and srcversion to sysfs".
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
__module_put_and_exit() is makred noreturn in module.h declaration, but is
lacking the attribute in the definition, which makes some tools (such as
sparse) unhappy. Amend the definition with the attribute as well (and
reformat the declaration so that it uses more common format).
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Pull block driver updates from Jens Axboe:
"This branch also contains core changes. I've come to the conclusion
that from 4.9 and forward, I'll be doing just a single branch. We
often have dependencies between core and drivers, and it's hard to
always split them up appropriately without pulling core into drivers
when that happens.
That said, this contains:
- separate secure erase type for the core block layer, from
Christoph.
- set of discard fixes, from Christoph.
- bio shrinking fixes from Christoph, as a followup up to the
op/flags change in the core branch.
- map and append request fixes from Christoph.
- NVMeF (NVMe over Fabrics) code from Christoph. This is pretty
exciting!
- nvme-loop fixes from Arnd.
- removal of ->driverfs_dev from Dan, after providing a
device_add_disk() helper.
- bcache fixes from Bhaktipriya and Yijing.
- cdrom subchannel read fix from Vchannaiah.
- set of lightnvm updates from Wenwei, Matias, Johannes, and Javier.
- set of drbd updates and fixes from Fabian, Lars, and Philipp.
- mg_disk error path fix from Bart.
- user notification for failed device add for loop, from Minfei.
- NVMe in general:
+ NVMe delay quirk from Guilherme.
+ SR-IOV support and command retry limits from Keith.
+ fix for memory-less NUMA node from Masayoshi.
+ use UINT_MAX for discard sectors, from Minfei.
+ cancel IO fixes from Ming.
+ don't allocate unused major, from Neil.
+ error code fixup from Dan.
+ use constants for PSDT/FUSE from James.
+ variable init fix from Jay.
+ fabrics fixes from Ming, Sagi, and Wei.
+ various fixes"
* 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits)
nvme/pci: Provide SR-IOV support
nvme: initialize variable before logical OR'ing it
block: unexport various bio mapping helpers
scsi/osd: open code blk_make_request
target: stop using blk_make_request
block: simplify and export blk_rq_append_bio
block: ensure bios return from blk_get_request are properly initialized
virtio_blk: use blk_rq_map_kern
memstick: don't allow REQ_TYPE_BLOCK_PC requests
block: shrink bio size again
block: simplify and cleanup bvec pool handling
block: get rid of bio_rw and READA
block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
NVMe: don't allocate unused nvme_major
nvme: avoid crashes when node 0 is memoryless node.
nvme: Limit command retries
loop: Make user notify for adding loop device failed
nvme-loop: fix nvme-loop Kconfig dependencies
nvmet: fix return value check in nvmet_subsys_alloc()
...
|
|
Pull core block updates from Jens Axboe:
- the big change is the cleanup from Mike Christie, cleaning up our
uses of command types and modified flags. This is what will throw
some merge conflicts
- regression fix for the above for btrfs, from Vincent
- following up to the above, better packing of struct request from
Christoph
- a 2038 fix for blktrace from Arnd
- a few trivial/spelling fixes from Bart Van Assche
- a front merge check fix from Damien, which could cause issues on
SMR drives
- Atari partition fix from Gabriel
- convert cfq to highres timers, since jiffies isn't granular enough
for some devices these days. From Jan and Jeff
- CFQ priority boost fix idle classes, from me
- cleanup series from Ming, improving our bio/bvec iteration
- a direct issue fix for blk-mq from Omar
- fix for plug merging not involving the IO scheduler, like we do for
other types of merges. From Tahsin
- expose DAX type internally and through sysfs. From Toshi and Yigal
* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
block: Fix front merge check
block: do not merge requests without consulting with io scheduler
block: Fix spelling in a source code comment
block: expose QUEUE_FLAG_DAX in sysfs
block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
Btrfs: fix comparison in __btrfs_map_block()
block: atari: Return early for unsupported sector size
Doc: block: Fix a typo in queue-sysfs.txt
cfq-iosched: Charge at least 1 jiffie instead of 1 ns
cfq-iosched: Fix regression in bonnie++ rewrite performance
cfq-iosched: Convert slice_resid from u64 to s64
block: Convert fifo_time from ulong to u64
blktrace: avoid using timespec
block/blk-cgroup.c: Declare local symbols static
block/bio-integrity.c: Add #include "blk.h"
block/partition-generic.c: Remove a set-but-not-used variable
block: bio: kill BIO_MAX_SIZE
cfq-iosched: temporarily boost queue priority for idle classes
block: drbd: avoid to use BIO_MAX_SIZE
block: bio: remove BIO_MAX_SECTORS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
"libata saw quite a bit of activities in this cycle:
- SMR drive support still being worked on
- bug fixes and improvements to misc SCSI command emulation
- some low level driver updates"
* 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits)
libata-scsi: better style in ata_msense_*()
AHCI: Clear GHC.IS to prevent unexpectly asserting INTx
ata: sata_dwc_460ex: remove redundant dev_err call
ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_*
libata: remove ATA_PROT_FLAG_DATA
libata: remove ata_is_nodata
ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48}
libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat
libata-scsi: Fix ZBC management out command translation
libata-scsi: Fix translation of REPORT ZONES command
ata: Handle ATA NCQ NO-DATA commands correctly
libata-eh: decode all taskfile protocols
ata: fixup ATA_PROT_NODATA
libsas: use ata_is_ncq() and ata_has_dma() accessors
libata: use ata_is_ncq() accessors
libata: return boolean values from ata_is_*
libata-scsi: avoid repeated calculation of number of TRIM ranges
libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit
libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control()
libata-scsi: fix D_SENSE bit relection in control mode page
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Nothing too exciting.
- updates to the pids controller so that pid limit breaches can be
noticed and monitored from userland.
- cleanups and non-critical bug fixes"
* 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: remove duplicated include from cgroup.c
cgroup: Use lld instead of ld when printing pids controller events_limit
cgroup: Add pids controller event when fork fails because of pid limit
cgroup: allow NULL return from ss->css_alloc()
cgroup: remove unnecessary 0 check from css_from_id()
cgroup: fix idr leak for the first cgroup root
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.8:
API:
- first part of skcipher low-level conversions
- add KPP (Key-agreement Protocol Primitives) interface.
Algorithms:
- fix IPsec/cryptd reordering issues that affects aesni
- RSA no longer does explicit leading zero removal
- add SHA3
- add DH
- add ECDH
- improve DRBG performance by not doing CTR by hand
Drivers:
- add x86 AVX2 multibuffer SHA256/512
- add POWER8 optimised crc32c
- add xts support to vmx
- add DH support to qat
- add RSA support to caam
- add Layerscape support to caam
- add SEC1 AEAD support to talitos
- improve performance by chaining requests in marvell/cesa
- add support for Araneus Alea I USB RNG
- add support for Broadcom BCM5301 RNG
- add support for Amlogic Meson RNG
- add support Broadcom NSP SoC RNG"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (180 commits)
crypto: vmx - Fix aes_p8_xts_decrypt build failure
crypto: vmx - Ignore generated files
crypto: vmx - Adding support for XTS
crypto: vmx - Adding asm subroutines for XTS
crypto: skcipher - add comment for skcipher_alg->base
crypto: testmgr - Print akcipher algorithm name
crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_op
crypto: nx - off by one bug in nx_of_update_msc()
crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct
crypto: scatterwalk - Inline start/map/done
crypto: scatterwalk - Remove unnecessary BUG in scatterwalk_start
crypto: scatterwalk - Remove unnecessary advance in scatterwalk_pagedone
crypto: scatterwalk - Fix test in scatterwalk_done
crypto: api - Optimise away crypto_yield when hard preemption is on
crypto: scatterwalk - add no-copy support to copychunks
crypto: scatterwalk - Remove scatterwalk_bytes_sglen
crypto: omap - Stop using crypto scatterwalk_bytes_sglen
crypto: skcipher - Remove top-level givcipher interface
crypto: user - Remove crypto_lookup_skcipher call
crypto: cts - Convert to skcipher
...
|
|
Pull documentation updates from Jonathan Corbet:
"Some big changes this month, headlined by the addition of a new
formatted documentation mechanism based on the Sphinx system.
The objectives here are to make it easier to create better-integrated
(and more attractive) documents while (eventually) dumping our
one-of-a-kind, cobbled-together system for something that is widely
used and maintained by others. There's a fair amount of information
what's being done, why, and how to use it in:
https://lwn.net/Articles/692704/
https://lwn.net/Articles/692705/
Closer to home, Documentation/kernel-documentation.rst describes how
it works.
For now, the new system exists alongside the old one; you should soon
see the GPU documentation converted over in the DRM pull and some
significant media conversion work as well. Once all the docs have
been moved over and we're convinced that the rough edges (of which are
are a few) have been smoothed over, the DocBook-based stuff should go
away.
Primary credit is to Jani Nikula for doing the heavy lifting to make
this stuff actually work; there has also been notable effort from
Markus Heiser, Daniel Vetter, and Mauro Carvalho Chehab.
Expect a couple of conflicts on the new index.rst file over the course
of the merge window; they are trivially resolvable. That file may be
a bit of a conflict magnet in the short term, but I don't expect that
situation to last for any real length of time.
Beyond that, of course, we have the usual collection of tweaks,
updates, and typo fixes"
* tag 'docs-for-linus' of git://git.lwn.net/linux: (77 commits)
doc-rst: kernel-doc: fix handling of address_space tags
Revert "doc/sphinx: Enable keep_warnings"
doc-rst: kernel-doc directive, fix state machine reporter
docs: deprecate kernel-doc-nano-HOWTO.txt
doc/sphinx: Enable keep_warnings
Documentation: add watermark_scale_factor to the list of vm systcl file
kernel-doc: Fix up warning output
docs: Get rid of some kernel-documentation warnings
doc-rst: add an option to ignore DocBooks when generating docs
workqueue: Fix a typo in workqueue.txt
Doc: ocfs: Fix typo in filesystems/ocfs2-online-filecheck.txt
Documentation/sphinx: skip build if user requested specific DOCBOOKS
Documentation: add cleanmediadocs to the documentation targets
Add .pyc files to .gitignore
Doc: PM: Fix a typo in intel_powerclamp.txt
doc-rst: flat-table directive - initial implementation
Documentation: add meta-documentation for Sphinx and kernel-doc
Documentation: tiny typo fix in usb/gadget_multi.txt
Documentation: fix wrong value in md.txt
bcache: documentation formatting, edited for clarity, stripe alignment notes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
"There are a couple of new things for s390 with this merge request:
- a new scheduling domain "drawer" is added to reflect the unusual
topology found on z13 machines. Performance tests showed up to 8
percent gain with the additional domain.
- the new crc-32 checksum crypto module uses the vector-galois-field
multiply and sum SIMD instruction to speed up crc-32 and crc-32c.
- proper __ro_after_init support, this requires RO_AFTER_INIT_DATA in
the generic vmlinux.lds linker script definitions.
- kcov instrumentation support. A prerequisite for that is the
inline assembly basic block cleanup, which is the reason for the
net/iucv/iucv.c change.
- support for 2GB pages is added to the hugetlbfs backend.
Then there are two removals:
- the oprofile hardware sampling support is dead code and is removed.
The oprofile user space uses the perf interface nowadays.
- the ETR clock synchronization is removed, this has been superseeded
be the STP clock synchronization. And it always has been
"interesting" code..
And the usual bug fixes and cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (82 commits)
s390/pci: Delete an unnecessary check before the function call "pci_dev_put"
s390/smp: clean up a condition
s390/cio/chp : Remove deprecated create_singlethread_workqueue
s390/chsc: improve channel path descriptor determination
s390/chsc: sanitize fmt check for chp_desc determination
s390/cio: make fmt1 channel path descriptor optional
s390/chsc: fix ioctl CHSC_INFO_CU command
s390/cio/device_ops: fix kernel doc
s390/cio: allow to reset channel measurement block
s390/console: Make preferred console handling more consistent
s390/mm: fix gmap tlb flush issues
s390/mm: add support for 2GB hugepages
s390: have unique symbol for __switch_to address
s390/cpuinfo: show maximum thread id
s390/ptrace: clarify bits in the per_struct
s390: stack address vs thread_info
s390: remove pointless load within __switch_to
s390: enable kcov support
s390/cpumf: use basic block for ecctr inline assembly
s390/hypfs: use basic block for diag inline assembly
...
|
|
Pull KVM leftovers from Radim Krčmář:
"This is a combination of two pull requests for 4.7-rc8 that were not
merged due to looking hairy. I have changed the tag message to focus
on circumstances of contained reverts as they were likely the reason
behind rejection.
This merge introduces three patches that are later reverted,
- Switching of MSR_TSC_AUX in SVM was thought to cause a host
misbehavior, but it was later cleared of those doubts and the patch
moved code to a hot path, so we reverted it. That patch also
needed a fix for 32 bit builds and both were reverted in one go.
- Al Viro noticed that a fix for a leak in an error path was not
valid with the given API and provided a better fix, so the original
patch was reverted.
Then there are two VMX fixes that move code around because VMCS was
not accessed between vcpu_load() and vcpu_put(), a simple ARM VHE fix,
and two one-liners for PML and MTRR"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
arm64: KVM: VHE: Context switch MDSCR_EL1
KVM: VMX: handle PML full VMEXIT that occurs during event delivery
Revert "KVM: SVM: fix trashing of MSR_TSC_AUX"
KVM: SVM: do not set MSR_TSC_AUX on 32-bit builds
KVM: don't use anon_inode_getfd() before possible failures
Revert "KVM: release anon file in failure path of vm creation"
KVM: release anon file in failure path of vm creation
KVM: nVMX: Fix memory corruption when using VMCS shadowing
kvm: vmx: ensure VMCS is current while enabling PML
KVM: SVM: fix trashing of MSR_TSC_AUX
KVM: MTRR: fix kvm_mtrr_check_gfn_range_consistency page fault
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This tree contains tooling fixes plus some additions:
- fixes to the vdso2c build environment that Stephen Rothwell is
using for the linux-next build (Arnaldo Carvalho de Melo)
- AVX-512 instruction mappings (Adrian Hunter)
- misc fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "perf tools: event.h needs asm/perf_regs.h"
x86: Make the vdso2c compiler use the host architecture headers
tools build: Fix objtool build with ARCH=x86_64
objtool: Always use host headers
objtool: Use tools/scripts/Makefile.arch to get ARCH and HOSTARCH
tools build: Add HOSTARCH Makefile variable
perf tests kmod-path: Fix build on ubuntu:16.04-x-armhf
perf tools: Add AVX-512 instructions to the new instructions test
perf tools: Add AVX-512 support to the instruction decoder used by Intel PT
x86/insn: Add AVX-512 support to the instruction decoder
x86/insn: perf tools: Fix vcvtph2ps instruction decoding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The irq department delivers:
- new core infrastructure to allow better management of multi-queue
devices (interrupt spreading, node aware descriptor allocation ...)
- a new interrupt flow handler to support the new fangled Intel VMD
devices.
- yet another new interrupt controller driver.
- a series of fixes which addresses sparse warnings, missing
includes, missing static declarations etc from Ben Dooks.
- a fix for the error handling in the hierarchical domain allocation
code.
- the usual pile of small updates to core and driver code"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
genirq: Fix missing irq allocation affinity hint
irqdomain: Fix irq_domain_alloc_irqs_recursive() error handling
irq/Documentation: Correct result of echnoing 5 to smp_affinity
MAINTAINERS: Remove Jiang Liu from irq domains
genirq/msi: Fix broken debug output
genirq: Add a helper to spread an affinity mask for MSI/MSI-X vectors
genirq/msi: Make use of affinity aware allocations
genirq: Use affinity hint in irqdesc allocation
genirq: Add affinity hint to irq allocation
genirq: Introduce IRQD_AFFINITY_MANAGED flag
genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP
irqchip/s3c24xx: Fixup IO accessors for big endian
irqchip/exynos-combiner: Fix usage of __raw IO
irqdomain: Fix disposal of mappings for interrupt hierarchies
irqchip/aspeed-vic: Add irq controller for Aspeed
doc/devicetree: Add Aspeed VIC bindings
x86/PCI/VMD: Use untracked irq handler
genirq: Add untracked irq handler
irqchip/mips-gic: Populate irq_domain names
irqchip/gicv3-its: Implement two-level(indirect) device table support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"This update provides the following changes:
- The rework of the timer wheel which addresses the shortcomings of
the current wheel (cascading, slow search for next expiring timer,
etc). That's the first major change of the wheel in almost 20
years since Finn implemted it.
- A large overhaul of the clocksource drivers init functions to
consolidate the Device Tree initialization
- Some more Y2038 updates
- A capability fix for timerfd
- Yet another clock chip driver
- The usual pile of updates, comment improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
tick/nohz: Optimize nohz idle enter
clockevents: Make clockevents_subsys static
clocksource/drivers/time-armada-370-xp: Fix return value check
timers: Implement optimization for same expiry time in mod_timer()
timers: Split out index calculation
timers: Only wake softirq if necessary
timers: Forward the wheel clock whenever possible
timers/nohz: Remove pointless tick_nohz_kick_tick() function
timers: Optimize collect_expired_timers() for NOHZ
timers: Move __run_timers() function
timers: Remove set_timer_slack() leftovers
timers: Switch to a non-cascading wheel
timers: Reduce the CPU index space to 256k
timers: Give a few structs and members proper names
hlist: Add hlist_is_singular_node() helper
signals: Use hrtimer for sigtimedwait()
timers: Remove the deprecated mod_timer_pinned() API
timers, net/ipv4/inet: Initialize connection request timers as pinned
timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned
timers, drivers/tty/metag_da: Initialize the poll timer as pinned
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Leftover fix from the v4.7 cycle: adds a reboot quirk"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/reboot: Add Dell Optiplex 7450 AIO reboot quirk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Ingo Molnar:
"The main change in this tree is the reworking, fixing and extension of
the TSC frequency enumeration code (by Len Brown)"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Remove the unused check_tsc_disabled()
x86/tsc: Enumerate BXT tsc_khz via CPUID
x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID
x86/tsc_msr: Remove irqoff around MSR-based TSC enumeration
x86/tsc_msr: Add Airmont reference clock values
x86/tsc_msr: Correct Silvermont reference clock values
x86/tsc_msr: Update comments, expand definitions
x86/tsc_msr: Remove debugging messages
x86/tsc_msr: Identify Intel-specific code
Revert "x86/tsc: Add missing Cherrytrail frequency to the table"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"The main changes in this cycle were:
- Intel-SoC enhancements (Andy Shevchenko)
- Intel CPU symbolic model definition rework (Dave Hansen)
- ... other misc changes"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/sfi: Enable enumeration of SD devices
x86/pci: Use MRFLD abbreviation for Merrifield
x86/platform/intel-mid: Make vertical indentation consistent
x86/platform/intel-mid: Mark regulators explicitly defined
x86/platform/intel-mid: Rename mrfl.c to mrfld.c
x86/platform/intel-mid: Enable spidev on Intel Edison boards
x86/platform/intel-mid: Extend PWRMU to support Penwell
x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code
x86/platform/intel-mid: Add pinctrl for Intel Merrifield
x86/platform/intel-mid: Enable GPIO expanders on Edison
x86/platform/intel-mid: Add Power Management Unit driver
x86/platform/atom/punit: Enable support for Merrifield
x86/platform/intel_mid_pci: Rework IRQ0 workaround
x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal
x86, mmc: Use Intel family name macros for mmc driver
x86/intel_telemetry: Use Intel family name macros for telemetry driver
x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver
x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver
x86/platform: Use new Intel model number macros
x86/intel_idle: Use Intel family macros for intel_idle
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Ingo Molnar:
"The main x86 FPU changes in this cycle were:
- a large series of cleanups, fixes and enhancements to re-enable the
XSAVES instruction on Intel CPUs - which is the most advanced
instruction to do FPU context switches (Yu-cheng Yu, Fenghua Yu)
- Add FPU tracepoints for the FPU state machine (Dave Hansen)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Do not BUG_ON() in early FPU code
x86/fpu/xstate: Re-enable XSAVES
x86/fpu/xstate: Fix fpstate_init() for XRSTORS
x86/fpu/xstate: Return NULL for disabled xstate component address
x86/fpu/xstate: Fix __fpu_restore_sig() for XSAVES
x86/fpu/xstate: Fix xstate_offsets, xstate_sizes for non-extended xstates
x86/fpu/xstate: Fix XSTATE component offset print out
x86/fpu/xstate: Fix PTRACE frames for XSAVES
x86/fpu/xstate: Fix supervisor xstate component offset
x86/fpu/xstate: Align xstate components according to CPUID
x86/fpu/xstate: Copy xstate registers directly to the signal frame when compacted format is in use
x86/fpu/xstate: Keep init_fpstate.xsave.header.xfeatures as zero for init optimization
x86/fpu/xstate: Rename 'xstate_size' to 'fpu_kernel_xstate_size', to distinguish it from 'fpu_user_xstate_size'
x86/fpu/xstate: Define and use 'fpu_user_xstate_size'
x86/fpu: Add tracepoints to dump FPU state at key points
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 stackdump update from Ingo Molnar:
"A number of stackdump enhancements"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Add show_stack_regs() and use it
printk: Make the printk*once() variants return a value
x86/dumpstack: Honor supplied @regs arg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Three small cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lguest: Read offset of device_cap later
lguest: Read length of device_cap later
x86: Do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
"A build system fix and a cleanup"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kbuild: Remove stale asm-generic wrappers
kbuild, x86: Track generated headers with generated-y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main changes:
- add initial commits to randomize kernel memory section virtual
addresses, enabled via a new kernel option: RANDOMIZE_MEMORY
(Thomas Garnier, Kees Cook, Baoquan He, Yinghai Lu)
- enhance KASLR (RANDOMIZE_BASE) physical memory randomization (Kees
Cook)
- EBDA/BIOS region boot quirk cleanups (Andy Lutomirski, Ingo Molnar)
- misc cleanups/fixes"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Simplify EBDA-vs-BIOS reservation logic
x86/boot: Clarify what x86_legacy_features.reserve_bios_regions does
x86/boot: Reorganize and clean up the BIOS area reservation code
x86/mm: Do not reference phys addr beyond kernel
x86/mm: Add memory hotplug support for KASLR memory randomization
x86/mm: Enable KASLR for vmalloc memory regions
x86/mm: Enable KASLR for physical mapping memory regions
x86/mm: Implement ASLR for kernel memory regions
x86/mm: Separate variable for trampoline PGD
x86/mm: Add PUD VA support for physical mapping
x86/mm: Update physical mapping variable names
x86/mm: Refactor KASLR entropy functions
x86/KASLR: Fix boot crash with certain memory configurations
x86/boot/64: Add forgotten end of function marker
x86/KASLR: Allow randomization below the load address
x86/KASLR: Extend kernel image physical address randomization to addresses larger than 4G
x86/KASLR: Randomize virtual address separately
x86/KASLR: Clarify identity map interface
x86/boot: Refuse to build with data relocations
x86/KASLR, x86/power: Remove x86 hibernation restrictions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"Various x86 low level modifications:
- preparatory work to support virtually mapped kernel stacks (Andy
Lutomirski)
- support for 64-bit __get_user() on 32-bit kernels (Benjamin
LaHaise)
- (involved) workaround for Knights Landing CPU erratum (Dave Hansen)
- MPX enhancements (Dave Hansen)
- mremap() extension to allow remapping of the special VDSO vma, for
purposes of user level context save/restore (Dmitry Safonov)
- hweight and entry code cleanups (Borislav Petkov)
- bitops code generation optimizations and cleanups with modern GCC
(H. Peter Anvin)
- syscall entry code optimizations (Paolo Bonzini)"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
x86/mm/cpa: Add missing comment in populate_pdg()
x86/mm/cpa: Fix populate_pgd(): Stop trying to deallocate failed PUDs
x86/syscalls: Add compat_sys_preadv64v2/compat_sys_pwritev64v2
x86/smp: Remove unnecessary initialization of thread_info::cpu
x86/smp: Remove stack_smp_processor_id()
x86/uaccess: Move thread_info::addr_limit to thread_struct
x86/dumpstack: Rename thread_struct::sig_on_uaccess_error to sig_on_uaccess_err
x86/uaccess: Move thread_info::uaccess_err and thread_info::sig_on_uaccess_err to thread_struct
x86/dumpstack: When OOPSing, rewind the stack before do_exit()
x86/mm/64: In vmalloc_fault(), use CR3 instead of current->active_mm
x86/dumpstack/64: Handle faults when printing the "Stack: " part of an OOPS
x86/dumpstack: Try harder to get a call trace on stack overflow
x86/mm: Remove kernel_unmap_pages_in_pgd() and efi_cleanup_page_tables()
x86/mm/cpa: In populate_pgd(), don't set the PGD entry until it's populated
x86/mm/hotplug: Don't remove PGD entries in remove_pagetable()
x86/mm: Use pte_none() to test for empty PTE
x86/mm: Disallow running with 32-bit PTEs to work around erratum
x86/mm: Ignore A/D bits in pte/pmd/pud_none()
x86/mm: Move swap offset/type up in PTE to work around erratum
x86/entry: Inline enter_from_user_mode()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/apic updates from Ingo Molnar:
"Misc cleanups and a small fix"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Remove the unused struct apic::apic_id_mask field
x86/apic: Fix misspelled APIC
x86/ioapic: Simplify ioapic_setup_resources()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull NOHZ updates from Ingo Molnar:
- fix system/idle cputime leaked on cputime accounting (all nohz
configs) (Rik van Riel)
- remove the messy, ad-hoc irqtime account on nohz-full and make it
compatible with CONFIG_IRQ_TIME_ACCOUNTING=y instead (Rik van Riel)
- cleanups (Frederic Weisbecker)
- remove unecessary irq disablement in the irqtime code (Rik van Riel)
* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Drop local_irq_save/restore from irqtime_account_irq()
sched/cputime: Reorganize vtime native irqtime accounting headers
sched/cputime: Clean up the old vtime gen irqtime accounting completely
sched/cputime: Replace VTIME_GEN irq time code with IRQ_TIME_ACCOUNTING code
sched/cputime: Count actually elapsed irq & softirq time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- introduce and use task_rcu_dereference()/try_get_task_struct() to fix
and generalize task_struct handling (Oleg Nesterov)
- do various per entity load tracking (PELT) fixes and optimizations
(Peter Zijlstra)
- cputime virt-steal time accounting enhancements/fixes (Wanpeng Li)
- introduce consolidated cputime output file cpuacct.usage_all and
related refactorings (Zhao Lei)
- ... plus misc fixes and enhancements
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Panic on scheduling while atomic bugs if kernel.panic_on_warn is set
sched/cpuacct: Introduce cpuacct.usage_all to show all CPU stats together
sched/cpuacct: Use loop to consolidate code in cpuacct_stats_show()
sched/cpuacct: Merge cpuacct_usage_index and cpuacct_stat_index enums
sched/fair: Rework throttle_count sync
sched/core: Fix sched_getaffinity() return value kerneldoc comment
sched/fair: Reorder cgroup creation code
sched/fair: Apply more PELT fixes
sched/fair: Fix PELT integrity for new tasks
sched/cgroup: Fix cpu_cgroup_fork() handling
sched/fair: Fix PELT integrity for new groups
sched/fair: Fix and optimize the fork() path
sched/cputime: Add steal time support to full dynticks CPU time accounting
sched/cputime: Fix prev steal time accouting during CPU hotplug
KVM: Fix steal clock warp during guest CPU hotplug
sched/debug: Always show 'nr_migrations'
sched/fair: Use task_rcu_dereference()
sched/api: Introduce task_rcu_dereference() and try_get_task_struct()
sched/idle: Optimize the generic idle loop
sched/fair: Fix the wrong throttled clock time for cfs_rq_clock_task()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"With over 300 commits it's been a busy cycle - with most of the work
concentrated on the tooling side (as it should).
The main kernel side enhancements were:
- Add per event callchain limit: Recently we introduced a sysctl to
tune the max-stack for all events for which callchains were
requested:
$ sysctl kernel.perf_event_max_stack
kernel.perf_event_max_stack = 127
Now this patch introduces a way to configure this per event, i.e.
this becomes possible:
$ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a
allowing finer tuning of how much buffer space callchains use.
This uses an u16 from the reserved space at the end, leaving
another u16 for future use.
There has been interest in even finer tuning, namely to control the
max stack for kernel and userspace callchains separately. Further
discussion is needed, we may for instance use the remaining u16 for
that and when it is present, assume that the sample_max_stack
introduced in this patch applies for the kernel, and the u16 left
is used for limiting the userspace callchain (Arnaldo Carvalho de
Melo)
- Optimize AUX event (hardware assisted side-band event) delivery
(Kan Liang)
- Rework Intel family name macro usage (this is partially x86 arch
work) (Dave Hansen)
- Refine and fix Intel LBR support (David Carrillo-Cisneros)
- Add support for Intel 'TopDown' events (Andi Kleen)
- Intel uncore PMU driver fixes and enhancements (Kan Liang)
- ... other misc changes.
Here's an incomplete list of the tooling enhancements (but there's
much more, see the shortlog and the git log for details):
- Support cross unwinding, i.e. collecting '--call-graph dwarf'
perf.data files in one machine and then doing analysis in another
machine of a different hardware architecture. This enables, for
instance, to do:
$ perf record -a --call-graph dwarf
on a x86-32 or aarch64 system and then do 'perf report' on it on a
x86_64 workstation (He Kuang)
- Allow reading from a backward ring buffer (one setup via
sys_perf_event_open() with perf_event_attr.write_backward = 1)
(Wang Nan)
- Finish merging initial SDT (Statically Defined Traces) support, see
cset comments for details about how it all works (Masami Hiramatsu)
- Support attaching eBPF programs to tracepoints (Wang Nan)
- Add demangling of symbols in programs written in the Rust language
(David Tolnay)
- Add support for tracepoints in the python binding, including an
example, that sets up and parses sched:sched_switch events,
tools/perf/python/tracepoint.py (Jiri Olsa)
- Introduce --stdio-color to set up the color output mode selection
in 'annotate' and 'report', allowing emit color escape sequences
when redirecting the output of these tools (Arnaldo Carvalho de
Melo)
- Add 'callindent' option to 'perf script -F', to indent the Intel PT
call stack, making this output more ftrace-like (Adrian Hunter,
Andi Kleen)
- Allow dumping the object files generated by llvm when processing
eBPF scriptlet events (Wang Nan)
- Add stackcollapse.py script to help generating flame graphs (Paolo
Bonzini)
- Add --ldlat option to 'perf mem' to specify load latency for loads
event (e.g. cpu/mem-loads/ ) (Jiri Olsa)
- Tooling support for Intel TopDown counters, recently added to the
kernel (Andi Kleen)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
perf tests: Add is_printable_array test
perf tools: Make is_printable_array global
perf script python: Fix string vs byte array resolving
perf probe: Warn unmatched function filter correctly
perf cpu_map: Add more helpers
perf stat: Balance opening and reading events
tools: Copy linux/{hash,poison}.h and check for drift
perf tools: Remove include/linux/list.h from perf's MANIFEST
tools: Copy the bitops files accessed from the kernel and check for drift
Remove: kernel unistd*h files from perf's MANIFEST, not used
perf tools: Remove tools/perf/util/include/linux/const.h
perf tools: Remove tools/perf/util/include/asm/byteorder.h
perf tools: Add missing linux/compiler.h include to perf-sys.h
perf jit: Remove some no-op error handling
perf jit: Add missing curly braces
objtool: Initialize variable to silence old compiler
objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
perf record: Add --tail-synthesize option
perf session: Don't warn about out of order event if write_backward is used
perf tools: Enable overwrite settings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"The biggest change in this cycle was an enhancement by Yazen Ghannam
to reduce the number of MCE error injection related IPIs.
The rest are smaller fixes"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Fix mce_rdmsrl() warning message
x86/RAS/AMD: Reduce the number of IPIs when prepping error injection
x86/mce/AMD: Increase size of the bank_map type
x86/mce: Do not use bank 1 for APEI generated error logs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The locking tree was busier in this cycle than the usual pattern - a
couple of major projects happened to coincide.
The main changes are:
- implement the atomic_fetch_{add,sub,and,or,xor}() API natively
across all SMP architectures (Peter Zijlstra)
- add atomic_fetch_{inc/dec}() as well, using the generic primitives
(Davidlohr Bueso)
- optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
Waiman Long)
- optimize smp_cond_load_acquire() on arm64 and implement LSE based
atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
on arm64 (Will Deacon)
- introduce smp_acquire__after_ctrl_dep() and fix various barrier
mis-uses and bugs (Peter Zijlstra)
- after discovering ancient spin_unlock_wait() barrier bugs in its
implementation and usage, strengthen its semantics and update/fix
usage sites (Peter Zijlstra)
- optimize mutex_trylock() fastpath (Peter Zijlstra)
- ... misc fixes and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API
locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire()
locking/static_keys: Fix non static symbol Sparse warning
locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec()
locking/atomic, arch/tile: Fix tilepro build
locking/atomic, arch/m68k: Remove comment
locking/atomic, arch/arc: Fix build
locking/Documentation: Clarify limited control-dependency scope
locking/atomic, arch/rwsem: Employ atomic_long_fetch_add()
locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire()
locking/atomic, arch/mips: Convert to _relaxed atomics
locking/atomic, arch/alpha: Convert to _relaxed atomics
locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions
locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
locking/atomic: Fix atomic64_relaxed() bits
locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The biggest change in this cycle were SGI/UV related changes that
clean up and fix UV boot quirks and problems.
There's also various smaller cleanups and refinements"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Reorganize the GUID table to make it easier to read
x86/efi: Remove the unused efi_get_time() function
x86/efi: Update efi_thunk() to use the the arch_efi_call_virt*() macros
x86/uv: Update uv_bios_call() to use efi_call_virt_pointer()
efi: Convert efi_call_virt() to efi_call_virt_pointer()
x86/efi: Remove unused variable 'efi'
efi: Document #define FOO_PROTOCOL_GUID layout
efibc: Report more information in the error messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- documentation updates
- miscellaneous fixes
- minor reorganization of code
- torture-test updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
rcu: Correctly handle sparse possible cpus
rcu: sysctl: Panic on RCU Stall
rcu: Fix a typo in a comment
rcu: Make call_rcu_tasks() tolerate first call with irqs disabled
rcu: Disable TASKS_RCU for usermode Linux
rcu: No ordering for rcu_assign_pointer() of NULL
rcutorture: Fix error return code in rcu_perf_init()
torture: Inflict default jitter
rcuperf: Don't treat gp_exp mis-setting as a WARN
rcutorture: Drop "-soundhw pcspkr" from x86 boot arguments
rcutorture: Don't specify the cpu type of QEMU on PPC
rcutorture: Make -soundhw a x86 specific option
rcutorture: Use vmlinux as the fallback kernel image
rcutorture/doc: Create initrd using dracut
torture: Stop onoff task if there is only one cpu
torture: Add starvation events to error summary
torture: Break online and offline functions out of torture_onoff()
torture: Forgive lengthy trace dumps and preemption
torture: Remove CONFIG_RCU_TORTURE_TEST_RUNNABLE, simplify code
torture: Simplify code, eliminate RCU_PERF_TEST_RUNNABLE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Add AVX-512 support to the instruction decoder, used by Intel PT,
fix vcvtph2ps instruction decoding (Adrian Hunter)
- Make objtool and vdso2c use the right arch header search path
(Stephen Rothwell, Josh Poimboeuf, Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This reverts commit e083a21fcac9311ca425e600a15332f4792c56cc.
Not needed at all, tools/perf/util/perf_regs.h, included via:
#include "perf_regs.h"
Should have a definition for PERF_REGS_MAX, and since this is dependent
on HAVE_PERF_REGS_SUPPORT, fixes the build on powerpc, noticed by trying
to cross compile this from ubuntu16.04 with a locally build libz &
elfutils pair, since those are not available in multilib packages.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-0bv204s71t4wuw1l53b6fz79@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To be clear: this is a ppc64le hosted, x86_64 target cross build.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160723150845.3af8e452@canb.auug.org.au
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- New drivers for FTS BMC "Teutates", TI INA3221, and Sensirion SHT3x.
- Added support for Microchip MCP9808 and TI TMP461.
- Cleanup and minor fixes in various drivers.
* tag 'hwmon-for-linus-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
Documentation: dtb: xgene: Add hwmon dts binding documentation
hwmon: (ftsteutates) Remove unused including <linux/version.h>
hwmon: (adt7411) set bit 3 in CFG1 register
hwmon: Add driver for FTS BMC chip "Teutates"
hwmon: (sht3x) add humidity heater element control
hwmon: (jc42) Add support for generic JC-42.4 devicetree binding
dt/bindings: Add bindings for JC-42.4 compatible temperature sensors
hwmon: (tmp102) Convert to use regmap, and drop local cache
hwmon: (tmp102) Rework chip configuration
hwmon: (tmp102) Improve handling of initial read delay
hwmon: (lm90) Drop unnecessary else statements
hwmon: (lm90) Use bool for valid flag
hwmon: (lm90) Read limit registers only once
hwmon: (lm90) Simplify read functions
hwmon: (lm90) Use devm_hwmon_device_register_with_groups
hwmon: (lm90) Use devm_add_action for cleanup
hwmon: (lm75) Convert to use regmap
hwmon: (lm75) Add update_interval attribute
hwmon: (lm75) Drop lm75_read_value and lm75_write_value
hwmon: (lm75) Handle cleanup with devm_add_action
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas
Pull SH drivers updates from Simon Horman:
"Drop use of SH Drivers on Renesas ARM Based SoCs.
I expect this to be my last pull request for these drivers as it
removes usage of them from Renesas ARM Based SoCs and my
co-maintenance of them.
The drivers are still used by some SH SoCs and listed under SUPERH in
the MAINTAINERS file"
* tag 'renesas-sh-drivers-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
MAINTAINERS: Drop drivers/sh/ for Renesas ARM
drivers: sh: Stop using the legacy clock domain on ARM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big USB driver update for 4.8-rc1. Lots of the normal
stuff in here, musb, gadget, xhci, and other updates and fixes. All
of the details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
cdc-acm: beautify probe()
cdc-wdm: use the common CDC parser
cdc-acm: cleanup error handling
cdc-acm: use the common parser
usbnet: move the CDC parser into USB core
usb: musb: sunxi: Simplify dr_mode handling
usb: musb: sunxi: make unexported symbols static
usb: musb: cppi41: add dma channel tracepoints
usb: musb: cppi41: move struct cppi41_dma_channel to header
usb: musb: cleanup cppi_dma header
usb: musb: gadget: add usb-request tracepoints
usb: musb: host: add urb tracepoints
usb: musb: add tracepoints to dump interrupt events
usb: musb: add tracepoints for register access
usb: musb: dsps: use musb register read/write wrappers instead
usb: musb: switch dev_dbg to tracepoints
usb: musb: add tracepoints support for debugging
usb: quirks: Add no-lpm quirk for Elan
phy: rcar-gen3-usb2: fix mutex_lock calling in interrupt
phy: rockhip-usb: use devm_add_action_or_reset()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big tty and serial driver update for 4.8-rc1.
Lots of good cleanups from Jiri on a number of vt and other tty
related things, and the normal driver updates. Full details are in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
tty/serial: atmel: enforce tasklet init and termination sequences
serial: sh-sci: Stop transfers in sci_shutdown()
serial: 8250_ingenic: drop #if conditional surrounding earlycon code
serial: 8250_mtk: drop !defined(MODULE) conditional
serial: 8250_uniphier: drop !defined(MODULE) conditional
earlycon: mark earlycon code as __used iif the caller is built-in
tty/serial/8250: use mctrl_gpio helpers
serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
serial: mctrl_gpio: add modem control read routine
tty/serial/8250: make UART_MCR register access consistent
serial: 8250_mid: Read RX buffer on RX DMA timeout for DNV
serial: 8250_dma: Export serial8250_rx_dma_flush()
dmaengine: hsu: Export hsu_dma_get_status()
tty: serial: 8250: add CON_CONSDEV to flags
tty: serial: samsung: add byte-order aware bit functions
tty: serial: samsung: fixup accessors for endian
serial: sirf: make fifo functions static
serial: mps2-uart: make driver explicitly non-modular
serial: mvebu-uart: free the IRQ in ->shutdown()
serial/bcm63xx_uart: use correct alias naming
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here is the big Staging and IIO driver update for 4.8-rc1.
We ended up adding more code than removing, again, but it's not all
that bad. Lots of cleanups all over the staging tree, and new IIO
drivers, full details in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (417 commits)
drivers:iio:accel:mma8452: removed unwanted return statements
drivers:iio:accel:mma8452: added cleanup provision in case of failure.
iio: Add iio.git tree to MAINTAINERS
iio:st_pressure: clean useless static channel initializers
iio:st_pressure:lps22hb: temperature support
iio:st_pressure:lps22hb: open drain support
iio:st_pressure: temperature triggered buffering
iio:st_pressure: document sampling gains
iio:st_pressure: align storagebits on power of 2
iio:st_sensors: align on storagebits boundaries
staging:iio:lis3l02dq drop separate driver
iio: accel: st_accel: Add lis3l02dq support
iio: adc: add missing of_node references to iio_dev
iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
iio: potentiometer: Fix typo in Kconfig
iio: potentiometer: mcp4531: Add device tree binding
iio: potentiometer: mcp4531: Add device tree binding documentation
iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
iio:imu:mpu6050: icm20608 initial support
iio: adc: max1363: Add device tree binding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver update for 4.8-rc1.
Not a lot of stuff, but it's all over the place, full details are in
the shortlog. All of these have been in linux-next with no reported
issues for a while"
* tag 'char-misc-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (49 commits)
lkdtm: silence warnings about function declarations
lkdtm: hide unused functions
intel_th: pci: Add Kaby Lake PCH-H support
intel_th: Fix a deadlock in modprobing
dsp56k: prevent a harmless underflow
chardev: add missing line break in pr_warn
lkdtm: use struct arrays instead of enums
lkdtm: move jprobe entry points to start of source
lkdtm: reorganize module paramaters
lkdtm: rename globals for clarity
lkdtm: rename "count" to "crash_count"
lkdtm: remove intentional off-by-one array access
lkdtm: split remaining logic bug tests to separate file
lkdtm: split heap corruption tests to separate file
lkdtm: split memory permissions tests to separate file
lkdtm: split usercopy tests to separate file
lkdtm: drop "alloc_size" parameter
lkdtm: add usercopy test for blocking kernel text
extcon: adc-jack: add suspend/resume support
extcon: add missing of_node_put after calling of_parse_phandle
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've got ten patches this time, half of which are related to a
plethora of nasty outcomes when inodes are transitioned from the
unlinked state to the free state. Small file systems are particularly
vulnerable to these problems, and it can manifest as mainly hangs, but
also file system corruption. The patches have been tested for
literally many weeks, with a very gruelling test, so I have a high
level of confidence.
- Andreas Gruenbacher wrote a series of five patches for various
lockups during the transition of inodes from unlinked to free.
The main patch is titled "Fix gfs2_lookup_by_inum lock inversion"
and the other four are support and cleanup patches related to that.
- Ben Marzinski contributed two patches with regard to a recreatable
problem when gfs2 tries to write a page to a file that is being
truncated, resulting in a BUG() in gfs2_remove_from_journal.
Note that Ben had to export vfs function __block_write_full_page to
get this to work properly. It's been posted a long time and he
talked to various VFS people about it, and nobody seemed to mind.
- I contributed 3 patches:
o The first one fixes a memory corruptor: a race in which one
process can overwrite the gl_object pointer set by another
process, causing kernel panic and other symptoms.
o The second patch fixes another race that resulted in a
false-positive BUG_ON. This occurred when resource group
reservations were freed by one process while another process
was trying to grab a new reservation in the same resource
group.
o The third patch fixes a problem with doing journal replay when
the journals are not all the same size"
* tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Fix gfs2_replay_incr_blk for multiple journal sizes
GFS2: Check rs_free with rd_rsspin protection
gfs2: writeout truncated pages
fs: export __block_write_full_page
gfs2: Lock holder cleanup
gfs2: Large-filesystem fix for 32-bit systems
gfs2: Get rid of gfs2_ilookup
gfs2: Fix gfs2_lookup_by_inum lock inversion
gfs2: Initialize iopen glock holder for new inodes
GFS2: don't set rgrp gl_object until it's inserted into rgrp tree
|
|
|
|
Pull ceph fix from Ilya Dryomov:
"A fix for a long-standing bug in the incremental osdmap handling code
that caused misdirected requests, tagged for stable"
The tag is signed with a brand new key - Sage is on vacation and I
didn't anticipate this"
* tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-client:
libceph: apply new_state before new_up_client on incrementals
|
|
In commit:
21cbc2822aa1 ("x86/mm/cpa: Unbreak populate_pgd(): stop trying to deallocate failed PUDs")
I intended to add this comment, but I failed at using git.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/242baf8612394f4e31216f96d13c4d2e9b90d1b7.1469293159.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Valdis Kletnieks bisected a boot failure back to this recent commit:
360cb4d15567 ("x86/mm/cpa: In populate_pgd(), don't set the PGD entry until it's populated")
I broke the case where a PUD table got allocated -- populate_pud()
would wander off a pgd_none entry and get lost. I'm not sure how
this survived my testing.
Fix the original issue in a much simpler way. The problem
was that, if we allocated a PUD table, failed to populate it, and
freed it, another CPU could potentially keep using the PGD entry we
installed (either by copying it via vmalloc_fault or by speculatively
caching it). There's a straightforward fix: simply leave the
top-level entry in place if this happens. This can't waste any
significant amount of memory -- there are at most 256 entries like
this systemwide and, as a practical matter, if we hit this failure
path repeatedly, we're likely to reuse the same page anyway.
For context, this is a reversion with this hunk added in:
if (ret < 0) {
+ /*
+ * Leave the PUD page in place in case some other CPU or thread
+ * already found it, but remove any useless entries we just
+ * added to it.
+ */
- unmap_pgd_range(cpa->pgd, addr,
+ unmap_pud_range(pgd_entry, addr,
addr + (cpa->numpages << PAGE_SHIFT));
return ret;
}
This effectively open-codes what the now-deleted unmap_pgd_range()
function used to do except that unmap_pgd_range() used to try to
free the page as well.
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/21cbc2822aa18aa812c0215f4231dbf5f65afa7f.1469249789.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The kprobe enablement work has uncovered that changes made by
a guest to MDSCR_EL1 were propagated to the host when VHE was
enabled, leading to unexpected exception being delivered.
Moving this register to the list of registers that are always
context-switched fixes the issue.
Fixes: 9c6c35683286 ("arm64: KVM: VHE: Split save/restore of registers shared between guest and host")
Cc: stable@vger.kernel.org #4.6
Reported-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com>
Tested-by: Tirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Pull networking fixes from David Miller:
1) Fix memory leak in nftables, from Liping Zhang.
2) Need to check result of vlan_insert_tag() in batman-adv otherwise we
risk NULL skb derefs, from Sven Eckelmann.
3) Check for dev_alloc_skb() failures in cfg80211, from Gregory
Greenman.
4) Handle properly when we have ppp_unregister_channel() happening in
parallel with ppp_connect_channel(), from WANG Cong.
5) Fix DCCP deadlock, from Eric Dumazet.
6) Bail out properly in UDP if sk_filter() truncates the packet to be
smaller than even the space that the protocol headers need. From
Michal Kubecek.
7) Similarly for rose, dccp, and sctp, from Willem de Bruijn.
8) Make TCP challenge ACKs less predictable, from Eric Dumazet.
9) Fix infinite loop in bgmac_dma_tx_add() from Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
packet: propagate sock_cmsg_send() error
net/mlx5e: Fix del vxlan port command buffer memset
packet: fix second argument of sock_tx_timestamp()
net: switchdev: change ageing_time type to clock_t
Update maintainer for EHEA driver.
net/mlx4_en: Add resilience in low memory systems
net/mlx4_en: Move filters cleanup to a proper location
sctp: load transport header after sk_filter
net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int
net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata
net: nb8800: Fix SKB leak in nb8800_receive()
et131x: Fix logical vs bitwise check in et131x_tx_timeout()
vlan: use a valid default mtu value for vlan over macsec
net: bgmac: Fix infinite loop in bgmac_dma_tx_add()
mlxsw: spectrum: Prevent invalid ingress buffer mapping
mlxsw: spectrum: Prevent overwrite of DCB capability fields
mlxsw: spectrum: Don't emit errors when PFC is disabled
mlxsw: spectrum: Indicate support for autonegotiation
mlxsw: spectrum: Force link training according to admin state
r8152: add MODULE_VERSION
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"This contains a fix for a potential crash/corruption issue and another
where the suid/sgid bits weren't cleared on write"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: verify upper dentry in ovl_remove_and_whiteout()
ovl: Copy up underlying inode's ->i_mode to overlay inode
ovl: handle ATTR_KILL*
|
