summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-05-13MIPS: cpu: Alter MIPS_CPU_* definitions to fill gapJames Hogan
The MIPS_CPU_* definitions accidentally missed bits 27..30 when MIPS_CPU_EVA was added, and further definitions have continued from there. Shift all the definitions since MIPS_CPU_EVA right by 4 so there are no gaps. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10044/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Add early CPU initialization codeFlorian Fainelli
Port the stblinux-3.3 code to perform a bunch of CPU-specific initialization, make it compatible with run-time detection of the CPU, and unroll the brcmstb-specific macros: BDEV_RB(), BDEV_UNSET. The "pref 30" disabling is done as a quirk. This is a preliminary change to allow the use of the "rotr" instruction gated by cpu_has_rixi. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: pgynther@google.com Cc: paul.burton@imgtec.com Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12504/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: math-emu: dsemul: Remove an unused bit in ADDIUPC emulationMaciej W. Rozycki
Avoid a reader's confusion, as the calculation is correct either way. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12283/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13BUS: brcmstb_gisb: Hook to MIPS board_be_handlerFlorian Fainelli
MIPS kernels allow platforms to invoke a custom Bus Error handler, add the necessary code to do this for Broadcom SoCs where the GISB bus error handler can be used. We may get a bus error from an address decoded outside of the GISB bus space, so we need to check the validity of such a capture before printing anything. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: cernekee@gmail.com Cc: arnd@arndb.de Cc: jaedon.shin@gmail.com Cc: pgynther@google.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12284/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Octeon: Add Octeon III CN7xxx interface detectionZubair Lutfullah Kakakhel
Add basic CN7XXX interface detection. This allows the kernel to boot with ethernet working as it initializes the ethernet ports with SGMII instead of defaulting to RGMII routines. Tested on the utm8 from Rhino Labs with a CN7130. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Cc: janne.huttunen@nokia.com Cc: aaro.koskinen@nokia.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12376/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Make flush_threadRalf Baechle
Avoids function calls to an empty function. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Support R_MIPS_PC{16,21,26} rel-style relocsPaul Burton
MIPS32 code uses rel-style relocs, and MIPS32r6 modules may include R_MIPS_PC16, R_MIPS_PC21 & R_MIPS_PC26 relocations. We thus need to support these relocations in order to load MIPS32r6 kernel modules. This patch adds such support, which is similar to the rela-style support in module-rela.c but making use of the implicit addend from the instruction encoding. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12435/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Support R_MIPS_PC{21,26} rela-style relocsPaul Burton
MIPS64 code uses rela-style relocs, and MIPS64r6 modules may include the new R_MIPS_PC21 & R_MIPS_PC26 relocations. We thus need to support these relocations in order to load MIPS64r6 kernel modules. They are similar to the existing R_MIPS_PC16 relocation but applying to a wider field. Implement support for them by genericising the existing R_MIPS_PC16 implementation such that it can be used for different field widths, and calling it for all 3 reloc types. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Kees Cook <keescook@chromium.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12434/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: module: Make consistent use of pr_*()Steven J. Hill
The module relocation handling code has inconsistent use of printk() and pr_*() functions. Convert printk() calls to use pr_err() and pr_warn(). [paul.burton@imgtec.com: Do the same thing in module.c] Signed-off-by: Steven J. Hill <sjhill@realitydiluted.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12433/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Probe the M6250 CPUPaul Burton
Support probing the M6250 CPU now that cases for handling it have been added where required in the core MIPS kernel code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12375/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add M6250 cases to CPU switch statementsPaul Burton
Add casses supporting the M6250 CPU to various switch statements in the core MIPS kernel code that define behaviour dependent upon the CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Maciej W. Rozycki <macro@codesourcery.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12374/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add M6250 PRID & cpu_type_enum valuesPaul Burton
Define the processor ID for the M6250 CPU and add a value to the enum cpu_type_enum for the core. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12373/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Probe the P6600 corePaul Burton
Support probing the P6600 core now that cases for handling it have been added throughout the core MIPS kernel code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12344/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add P6600 cases to CPU switch statementsPaul Burton
Add cases supporting the P6600 CPU to various switch statements in core MIPS kernel code that define behaviour dependent upon the CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Petri Gynther <pgynther@google.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12343/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add P6600 PRID & cpu_type_enum valuesPaul Burton
Define the processor ID for the P6600 core and add a value to the enum cpu_type_enum for the core. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12342/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: <asm/cpu.h>: Reformat to 80 columns.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: SEAD3 can support MIPS32r6 CPUsPaul Burton
There are CPUs/bitfiles available for use with SEAD3 boards which implement release 6 of the MIPS architecture. Allow building the kernel for such a system. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12372/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Stop printing EJTAG exceptions to UARTPaul Burton
When CONFIG_MIPS_CPS_NS16550 is enabled, some register state is dumped to the UART when an exception is taken via the BEV on secondary cores. EJTAG exceptions are architecturally expected to be handled by the BEV even when Status.BEV is 0. This effectively means that if userland executes an sdbbp instruction on a secondary core then the kernel dumps register state to the UART even though the exception is perfectly normal & expected. Prevent this by simply not dumping information to the UART for EJTAG exceptions. Fixes: 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12341/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Add nothreads kernel parameterPaul Burton
When debugging a new system or core it can be useful to disable the use of multithreading. Introduce a "nothreads" kernel command line parameter that can be set in order to do so. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Support MIPSr6 Virtual ProcessorsPaul Burton
Introduce support for bringing up Virtual Processors in MIPSr6 systems as CPUs, much like their VPE parallel from the now-deprecated MT ASE. The existing mips_cps_boot_vpes function fits the MIPSr6 architecture pretty well - it can now simply write the mask of running VPs to the VC_RUN register, rather than looping through each & starting or stopping as appropriate as is done for VPEs from the MT ASE. Thus the VP support is in general an extension & simplification of the existing MT ASE VPE (aka SMVP) support. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12339/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Skip core setup if coherentPaul Burton
In preparation for supporting MIPSr6 multithreading (ie. VPs) which will begin execution from the core reset vector, skip core level setup if the core is already coherent. This is never the case when a core is first started, since boot_core explicitly clears the cores GCR_Cx_COH_EN register, and always the case when secondary VPs start since the first VP to start will have enabled coherence after initialising the core & its caches. One notable side effect of this patch is that eva_init gets called slightly earlier, prior to mips_cps_core_init rather than after it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Pull boot config retrieval out of mips_cps_boot_vpesPaul Burton
The mips_cps_boot_vpes function previously included code to retrieve pointers to the core & VPE boot configuration structs. These structures were used both by mips_cps_boot_vpes and by its mips_cps_core_entry callsite. In preparation for skipping the call to mips_cps_boot_vpes on some invocations of mips_cps_core_entry, pull the calculation of those pointers out into a separate function such that it can continue to be shared. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Pull cache init into a functionPaul Burton
In preparation for further modifications to mips_cps_core_entry, pull the L1 cache initialisation out into a separate function. This both makes the code in mips_cps_core_entry read more clearly, particularly when modifying it, and shortens it which will become important as code is added that needs to continue to fit within the reset vector. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12336/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Ensure our VP ident calculation is correctPaul Burton
When bringing up a CPU, ensure that its local ID as provided by the GIC matches up with our calculation of it. This is vital, since if the condition doesn't hold then we won't have configured interrupts correctly for the VP. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12335/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13irqchip: mips-gic: Provide VP ID accessorPaul Burton
Provide a gic_read_local_vp_id() function to read the VCNUM field of the GICs local VP_IDENT register. This will be used by a further patch to check that the value reported by the GIC matches up with the kernels calculation. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDRPaul Burton
The Linux CPU number doesn't necessarily match up with the ID used for a VP by hardware. Convert the CPU number to the HW ID using mips_cm_vp_id when writing to the VP(E)_OTHER_ADDR register in order to ensure that we correctly access registers for the VPs of secondary cores. This most notably affects systems using CM3, such as those based around I6400. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12333/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: CM: Fix mips_cm_max_vp_width for UP kernelsPaul Burton
Fix mips_cm_max_vp_width for UP kernels where it previously referenced smp_num_siblings, which is not declared for UP kernels. This led to build errors such as the following: drivers/built-in.o: In function `$L446': irq-mips-gic.c:(.text+0x1994): undefined reference to `smp_num_siblings' drivers/built-in.o:irq-mips-gic.c:(.text+0x199c): more undefined references to `smp_num_siblings' follow On UP kernels simply return 1, leaving the reference to smp_num_siblings in place only for SMP kernels. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12332/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: CM: Add CM GCR_BEV_BASE accessorsPaul Burton
Generate accessor functions for the GCR_BEV_BASE register introduced by CM3, for use by a later patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: CPC: Add start, stop and running CM3 CPC registersMarkos Chandras
Add the new CM3 registers for controlling bringing up and powering down VPs on MIPSR6 cores. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12330/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: pm-cps: Avoid offset overflow on MIPSr6Markos Chandras
This is similar to commit 934c79231c1b ("MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions"). The CACHE instruction has been redefined for MIPSr6 and it reduced its offset field to 8 bits. This leads to micro-assembler field overflow warnings when booting SMP MIPSr6 cores like the following one: Call Trace: [<ffffffff8010af88>] show_stack+0x68/0x88 [<ffffffff8056ddf0>] dump_stack+0x68/0x88 [<ffffffff801305bc>] warn_slowpath_common+0x8c/0xc8 [<ffffffff80130630>] warn_slowpath_fmt+0x38/0x48 [<ffffffff80125814>] build_insn+0x514/0x5c0 [<ffffffff806ee134>] cps_gen_cache_routine.isra.3+0xe0/0x1b8 [<ffffffff806ee570>] cps_pm_init+0x364/0x9ec [<ffffffff80100538>] do_one_initcall+0x90/0x1a8 [<ffffffff806e8c14>] kernel_init_freeable+0x160/0x21c [<ffffffff8056b6a0>] kernel_init+0x10/0xf8 [<ffffffff801059f8>] ret_from_kernel_thread+0x14/0x1c We fix this by incrementing the base register on every loop. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12329/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: traps: Make sure secondary cores have a sane ebase registerMarkos Chandras
We shouldn't trust that the secondary cores will have a sane ebase register (either from the bootloader or during the hardware design phase) so use the ebase address as calculated by the boot CPU. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Petri Gynther <pgynther@google.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12328/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Detect MIPSr6 Virtual Processor supportPaul Burton
MIPSr6 introduces support for "Virtual Processors", which are conceptually similar to VPEs from the now-deprecated MT ASE. Detect whether the system supports VPs using the VP bit in Config5, adding cpu_has_vp for use by later patches. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12327/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for DPT-ModuleAntony Pavlov
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO key and LED. Links: * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=50 * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=63 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Daan Pape <daan@dptechnics.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12886/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13devicetree: add DPTechnics vendor idAntony Pavlov
Please see https://www.dptechnics.com/contact for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Daan Pape <daan@dptechnics.com> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12885/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for Onion OmegaAntony Pavlov
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO key and LED. Please see https://onion.io/omega for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: L. D. Pinney <ldpinney@gmail.com> Cc: Boken Lin <bl@onion.io> Cc: Jacky Huang <huangfangcheng@163.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13devicetree: add Onion Corporation vendor idAntony Pavlov
Please see https://onion.io/contact for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12883/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for Dragino MS14 (Dragino 2)Antony Pavlov
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO keys and LEDs. Links: * http://www.dragino.com/products/mother-board/item/71-ms14-p.html * https://wiki.openwrt.org/toh/dragino/ms14 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13devicetree: add Dragino vendor idAntony Pavlov
Please see http://www.dragino.com/about/about.html for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: add initial support for TP-LINK MR3020Antony Pavlov
The following features are supported: * UART; * SPI-flash; * USB host; * GPIO keys and LEDs. Links: * http://www.tp-link.com/en/products/details/?model=TL-MR3020 * http://wiki.openwrt.org/toh/tp-link/tl-mr3020 * https://wikidevi.com/wiki/TP-LINK_TL-MR3020 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12880/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: update devicetree clock support for AR9331Antony Pavlov
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12879/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: dts: qca: introduce AR9331 devicetreeAntony Pavlov
This patch introduces devicetree for Atheros AR9331 SoC (AKA Hornet). The AR9331 chip is a Wi-Fi System-On-Chip (WiSOC), typically used in very cheap Access Points and Routers. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12878/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Disable platform code for OF boards.Antony Pavlov
For OF boards we have to skip platform initialization code so we can prove that OF code do all necessary initialization. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12877/ Patchwork: https://patchwork.linux-mips.org/patch/12920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: update devicetree clock support for AR9132Antony Pavlov
Current ath79 clock.c code does not read reference clock and pll setup from devicetree. E.g. you can set any clock rate value in board DTS but it will have no effect on the real clk calculation. This patch fixes some AR9132 devicetree clock support defects: * clk initialization function ath79_clocks_init_dt_ng() is introduced; it actually gets pll block base register address and reference clock from devicetree; * pll register parsing code is moved to the separate ar724x_clk_init() function; this function can be called from platform code or from devicetree code. Also mips_hpt_frequency value is set from dt, so the appropriate clock parameter is added to the cpu@0 devicetree node. The same approach can be used for adding AR9331 devicetree support. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12876/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Introduce <dt-bindings/clock/ath79-clk.h>Antony Pavlov
The include/dt-bindings/clock/ath79-clk.h header file is introduced so we can use symbolic identifiers for SoC clocks. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: dts: qca: ar9132: use short references for dt nodesAntony Pavlov
Here are some Sascha Hauer's arguments for using aliases in the dts files: - using aliases reduces the number of indentations in dts files; - dts files become independent of the layout of the dtsi files (it becomes possible to introduce another bus {} hierarchy between a toplevel bus and the devices when you have to); - less chances for typos. if &i2c2 does not exist you get an error. If instead you duplicate the whole path in the dts file a typo in the path will just create another node. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Alban Bedel <albeu@free.fr> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12873/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: drop unused alias nodeAntony Pavlov
The TP-LINK TL-WR1043ND board has only one serial port, so replacing the default of 0 with 0 does nothing useful. Moreover, the correct name for aliases node is "aliases" not "alias". An overview of the "aliases" node usage can be found on the device tree usage page at devicetree.org [1]. Also please see chapter 3.3 ("Aliases node") of the ePAPR 1.1 [2]. [1] http://devicetree.org/Device_Tree_Usage#aliases_Node [2] https://www.power.org/documentation/epapr-version-1-1/ Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Lantiq: Make it possible to build in no device treeHauke Mehrtens
Now it is possible to build in no device tree at all and depend on the boot loader providing one or someone concatenating a device tree to the end of the image. This was copied from arch/mips/bmips/Kconfig Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12899/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Lantiq: Add support for device tree file from boot loaderHauke Mehrtens
This fetches the device tree file like it is specified in the MIPS UHI interface if one was found. This is also used when the device tree file was appended to the kernel image with cat. This code is copied from arch/mips/bmips/setup.c. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12898/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Octeon: Add DTS for EdgeRouter LiteAaro Koskinen
Add DTS for EdgeRouter Lite that is usable as is without any "pruning" with APPENDED_DTB. Compared to builtin generic DTB, we can avoid errors and delays from probing non-existent I2C devices. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Octeon: Add DTS for D-Link DSR-1000NAaro Koskinen
Add DTS for D-Link DSR-1000N that is usable as is without any "pruning" with APPENDED_DTB. Split out the common parts from octeon_3xxx.dts into octeon_3xxx.dtsi. Compared to builtin generic DTB, we can specificy fixed links properly and avoid probing non-existent I2C devices. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12840/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v0.10.2 at 2024-09-19 17:21:55 (GMT)