summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-26goldfish: Sanitize the broken interrupt handlerThomas Gleixner
commit 6cf18e6927c0b224f972e3042fb85770d63cb9f8 upstream. This interrupt handler is broken in several ways: - It loops forever when the op code is not decodeable - It never returns IRQ_HANDLED because the only way to exit the loop returns IRQ_NONE unconditionally. The whole concept of this is broken. Creating devices in an interrupt handler is beyond any point of sanity. Make it at least behave halfways sane so accidental users do not have to deal with a hard to debug lockup. Fixes: e809c22b8fb028 ("goldfish: add the goldfish virtual bus") Reported-by: Gabriel C <nix.or.die@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26x86/platform/goldfish: Prevent unconditional loadingThomas Gleixner
commit 47512cfd0d7a8bd6ab71d01cd89fca19eb2093eb upstream. The goldfish platform code registers the platform device unconditionally which causes havoc in several ways if the goldfish_pdev_bus driver is enabled: - Access to the hardcoded physical memory region, which is either not available or contains stuff which is completely unrelated. - Prevents that the interrupt of the serial port can be requested - In case of a spurious interrupt it goes into a infinite loop in the interrupt handler of the pdev_bus driver (which needs to be fixed seperately). Add a 'goldfish' command line option to make the registration opt-in when the platform is compiled in. I'm seriously grumpy about this engineering trainwreck, which has seven SOBs from Intel developers for 50 lines of code. And none of them figured out that this is broken. Impressive fail! Fixes: ddd70cf93d78 ("goldfish: platform device for x86") Reported-by: Gabriel C <nix.or.die@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26USB: serial: console: fix uninitialised spinlockJohan Hovold
commit 14816b16fa0adac24f82492f18fa62c55acabbbe upstream. Since commit 4a510969374a ("tty: Make tty_files_lock per-tty") a new tty_struct spin lock is taken in the tty release path, but the USB-serial-console hack was never updated hence leaving the lock of its "fake" tty uninitialised. This was eventually detected by lockdep. Make sure to initialise the new lock also for the fake tty to address this regression. Yes, this code is a mess, but cleaning it up is left for another day. Fixes: 4a510969374a ("tty: Make tty_files_lock per-tty") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26USB: serial: ark3116: fix register-accessor error handlingJohan Hovold
commit 9fef37d7cf170522fb354d6d0ea6de09b9b16678 upstream. The current implementation failed to detect short transfers, something which could lead to bits of the uninitialised heap transfer buffer leaking to user space. Fixes: 149fc791a452 ("USB: ark3116: Setup some basic infrastructure for new ark3116 driver.") Fixes: f4c1e8d597d1 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26USB: serial: opticon: fix CTS retrieval at openJohan Hovold
commit 2eee05020a0e7ee7c04422cbacdb07859e45dce6 upstream. The opticon driver used a control request at open to trigger a CTS status notification to be sent over the bulk-in pipe. When the driver was converted to using the generic read implementation, an inverted test prevented this request from being sent, something which could lead to TIOCMGET reporting an incorrect CTS state. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 7a6ee2b02751 ("USB: opticon: switch to generic read implementation") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26USB: serial: spcp8x5: fix modem-status handlingJohan Hovold
commit 5ed8d41023751bdd3546f2fe4118304357efe8d2 upstream. Make sure to detect short control transfers and return zero on success when retrieving the modem status. This fixes the TIOCMGET implementation which since e1ed212d8593 ("USB: spcp8x5: add proper modem-status support") has returned TIOCM_LE on successful retrieval, and avoids leaking bits from the stack on short transfers. This also fixes the carrier-detect implementation which since the above mentioned commit unconditionally has returned true. Fixes: e1ed212d8593 ("USB: spcp8x5: add proper modem-status support") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26USB: serial: ftdi_sio: fix line-status over-reportingJohan Hovold
commit a6bb1e17a39818b01b55d8e6238b4b5f06d55038 upstream. FTDI devices use a receive latency timer to periodically empty the receive buffer and report modem and line status (also when the buffer is empty). When a break or error condition is detected the corresponding status flags will be set on a packet with nonzero data payload and the flags are not updated until the break is over or further characters are received. In order to avoid over-reporting break and error conditions, these flags must therefore only be processed for packets with payload. This specifically fixes the case where after an overrun, the error condition is continuously reported and NULL-characters inserted until further data is received. Reported-by: Michael Walle <michael@walle.cc> Fixes: 72fda3ca6fc1 ("USB: serial: ftd_sio: implement sysrq handling on break") Fixes: 166ceb690750 ("USB: ftdi_sio: clean up line-status handling") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26USB: serial: ftdi_sio: fix extreme low-latency settingJohan Hovold
commit c6dce2626606ef16434802989466636bc28c1419 upstream. Since commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") the FTDI driver has been using a receive latency-timer value of 1 ms instead of the device default of 16 ms. The latency timer is used to periodically empty a non-full receive buffer, but a status header is always sent when the timer expires including when the buffer is empty. This means that a two-byte bulk message is received every millisecond also for an otherwise idle port as long as it is open. Let's restore the pre-2009 behaviour which reduces the rate of the status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to 62.5 Hz) by not setting ASYNC_LOW_LATENCY by default. Anyone willing to pay the price for the minimum-latency behaviour should set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool such as setserial (e.g. setserial /dev/ttyUSB0 low_latency). Note that since commit 0cbd81a9f6ba ("USB: ftdi_sio: remove tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but to set a minimal latency timer. Reported-by: Antoine Aubert <a.aubert@overkiz.com> Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26USB: serial: ftdi_sio: fix modem-status error handlingJohan Hovold
commit 427c3a95e3e29e65f59d99aaf320d7506f3eed57 upstream. Make sure to detect short responses when fetching the modem status in order to avoid parsing uninitialised buffer data and having bits of it leak to user space. Note that we still allow for short 1-byte responses. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26USB: serial: cp210x: add new IDs for GE Bx50v3 boardsKen Lin
commit 9a593656def0dc2f6c227851e8e602077267a5f1 upstream. Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design change. Signed-off-by: Ken Lin <yungching0725@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26USB: serial: mos7840: fix another NULL-deref at openJohan Hovold
commit 5182c2cf2a9bfb7f066ef0bdd2bb6330b94dd74e upstream. Fix another NULL-pointer dereference at open should a malicious device lack an interrupt-in endpoint. Note that the driver has a broken check for an interrupt-in endpoint which means that an interrupt URB has never even been submitted. Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26tty: serial: msm: Fix module autoloadJavier Martinez Canillas
commit abe81f3b8ed2996e1712d26d38ff6b73f582c616 upstream. If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/tty/serial/msm_serial.ko | grep alias $ After this patch: $ modinfo drivers/tty/serial/msm_serial.ko | grep alias alias: of:N*T*Cqcom,msm-uartdmC* alias: of:N*T*Cqcom,msm-uartdm alias: of:N*T*Cqcom,msm-uartC* alias: of:N*T*Cqcom,msm-uart Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26net: socket: fix recvmmsg not returning error from sock_errorMaxime Jayat
[ Upstream commit e623a9e9dec29ae811d11f83d0074ba254aba374 ] Commit 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path"), changed the exit path of recvmmsg to always return the datagrams variable and modified the error paths to set the variable to the error code returned by recvmsg if necessary. However in the case sock_error returned an error, the error code was then ignored, and recvmmsg returned 0. Change the error path of recvmmsg to correctly return the error code of sock_error. The bug was triggered by using recvmmsg on a CAN interface which was not up. Linux 4.6 and later return 0 in this case while earlier releases returned -ENETDOWN. Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path") Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26ip: fix IP_CHECKSUM handlingPaolo Abeni
[ Upstream commit ca4ef4574f1ee5252e2cd365f8f5d5bafd048f32 ] The skbs processed by ip_cmsg_recv() are not guaranteed to be linear e.g. when sending UDP packets over loopback with MSGMORE. Using csum_partial() on [potentially] the whole skb len is dangerous; instead be on the safe side and use skb_checksum(). Thanks to syzkaller team to detect the issue and provide the reproducer. v1 -> v2: - move the variable declaration in a tighter scope Fixes: ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26ptr_ring: fix race conditions when resizingMichael S. Tsirkin
[ Upstream commit e71695307114335be1ed912f4a347396c2ed0e69 ] Resizing currently drops consumer lock. This can cause entries to be reordered, which isn't good in itself. More importantly, consumer can detect a false ring empty condition and block forever. Further, nesting of consumer within producer lock is problematic for tun, since it produces entries in a BH, which causes a lock order reversal: CPU0 CPU1 ---- ---- consume: lock(&(&r->consumer_lock)->rlock); resize: local_irq_disable(); lock(&(&r->producer_lock)->rlock); lock(&(&r->consumer_lock)->rlock); <Interrupt> produce: lock(&(&r->producer_lock)->rlock); To fix, nest producer lock within consumer lock during resize, and keep consumer lock during the whole swap operation. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26irda: Fix lockdep annotations in hashbin_delete().David S. Miller
[ Upstream commit 4c03b862b12f980456f9de92db6d508a4999b788 ] A nested lock depth was added to the hasbin_delete() code but it doesn't actually work some well and results in tons of lockdep splats. Fix the code instead to properly drop the lock around the operation and just keep peeking the head of the hashbin queue. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26vxlan: fix oops in dev_fill_metadata_dstPaolo Abeni
[ Upstream commit 22f0708a718daea5e79de2d29b4829de016a4ff4 ] Since the commit 0c1d70af924b ("net: use dst_cache for vxlan device") vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL dst_cache pointer, so the latter should explicitly check for valid dst_cache ptr. Unfortunately the commit d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") removed said check. As a result is possible to trigger a null pointer access calling vxlan_fill_metadata_dst(), e.g. with: ovs-vsctl add-br ovs-br0 ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \ type=vxlan options:remote_ip=192.168.1.1 \ options:key=1234 options:dst_port=4789 ofport_request=10 ip address add dev ovs-br0 172.16.1.2/24 ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \ targets=\"172.16.1.1:1234\" sampling=1 iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234 This commit addresses the issue passing to vxlan_get_route() the dst_cache already available into the lwt info processed by vxlan_fill_metadata_dst(). Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26dccp: fix freeing skb too early for IPV6_RECVPKTINFOAndrey Konovalov
[ Upstream commit 5edabca9d4cff7f1f2b68f0bac55ef99d9798ba4 ] In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet is forcibly freed via __kfree_skb in dccp_rcv_state_process if dccp_v6_conn_request successfully returns. However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb is saved to ireq->pktopts and the ref count for skb is incremented in dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed in dccp_rcv_state_process. Fix by calling consume_skb instead of doing goto discard and therefore calling __kfree_skb. Similar fixes for TCP: fb7e2399ec17f1004c0e0ccfd17439f8759ede01 [TCP]: skb is unexpectedly freed. 0aea76d35c9651d55bbaf746e7914e5f9ae5a25d tcp: SYN packets are now simply consumed Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notificationMarcus Huewe
[ Upstream commit 7627ae6030f56a9a91a5b3867b21f35d79c16e64 ] When setting a neigh related sysctl parameter, we always send a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent. For instance, when executing sysctl net.ipv6.neigh.wlp3s0.retrans_time_ms=2000 a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent is generated. This is caused by commit 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes"). According to the commit's description, it was intended to generate such an event when setting the "delay_first_probe_time" sysctl parameter. In order to fix this, only generate this event when actually setting the "delay_first_probe_time" sysctl parameter. This fix should not have any unintended side-effects, because all but one registered netevent callbacks check for other netevent event types (the registered callbacks were obtained by grepping for "register_netevent_notifier"). The only callback that uses the NETEVENT_DELAY_PROBE_TIME_UPDATE event is mlxsw_sp_router_netevent_event() (in drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c): in case of this event, it only accesses the DELAY_PROBE_TIME of the passed neigh_parms. Fixes: 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes") Signed-off-by: Marcus Huewe <suse-tux@gmx.de> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26packet: Do not call fanout_release from atomic contextsAnoob Soman
[ Upstream commit 2bd624b4611ffee36422782d16e1c944d1351e98 ] Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26packet: fix races in fanout_add()Eric Dumazet
[ Upstream commit d199fab63c11998a602205f7ee7ff7c05c97164b ] Multiple threads can call fanout_add() at the same time. We need to grab fanout_mutex earlier to avoid races that could lead to one thread freeing po->rollover that was set by another thread. Do the same in fanout_release(), for peace of mind, and to help us finding lockdep issues earlier. Fixes: dc99f600698d ("packet: Add fanout support.") Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26net: ethernet: ti: cpsw: fix cpsw assignment in resumeIvan Khoronzhuk
[ Upstream commit a60ced990e309666915d21445e95347d12406694 ] There is a copy-paste error, which hides breaking of resume for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev) in suspend, but left it unchanged in resume. Fixes: 606f39939595a4d4540406bfc11f265b2036af6d (ti: cpsw: move platform data and slaves info to cpsw_common) Reported-by: Alexey Starikovskiy <AStarikovskiy@topcon.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26net/llc: avoid BUG_ON() in skb_orphan()Eric Dumazet
[ Upstream commit 8b74d439e1697110c5e5c600643e823eb1dd0762 ] It seems nobody used LLC since linux-3.12. Fortunately fuzzers like syzkaller still know how to run this code, otherwise it would be no fun. Setting skb->sk without skb->destructor leads to all kinds of bugs, we now prefer to be very strict about it. Ideally here we would use skb_set_owner() but this helper does not exist yet, only CAN seems to have a private helper for that. Fixes: 376c7311bdb6 ("net: add a temporary sanity check in skb_orphan()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26net/mlx5e: Disable preemption when doing TC statistics upcallOr Gerlitz
[ Upstream commit fed06ee89b78d3af32e235e0e89ad0d946fcb95d ] When called by HW offloading drivers, the TC action (e.g net/sched/act_mirred.c) code uses this_cpu logic, e.g _bstats_cpu_update(this_cpu_ptr(a->cpu_bstats), bytes, packets) per the kernel documention, preemption should be disabled, add that. Before the fix, when running with CONFIG_PREEMPT set, we get a BUG: using smp_processor_id() in preemptible [00000000] code: tc/3793 asserion from the TC action (mirred) stats_update callback. Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26kcm: fix a null pointer dereference in kcm_sendmsg()WANG Cong
[ Upstream commit cd27b96bc13841ee7af25837a6ae86fee87273d6 ] In commit 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()") I tried to avoid skb allocation for 0-length case, but missed a check for NULL pointer in the non EOR case. Fixes: 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26kcm: fix 0-length case for kcm_sendmsg()WANG Cong
[ Upstream commit 98e3862ca2b1ae595a13805dcab4c3a6d7718f4d ] Dmitry reported a kernel warning: WARNING: CPU: 3 PID: 2936 at net/kcm/kcmsock.c:627 kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627 CPU: 3 PID: 2936 Comm: a.out Not tainted 4.10.0-rc6+ #209 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:539 warn_slowpath_null+0x2c/0x40 kernel/panic.c:582 kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627 kcm_sendmsg+0x163a/0x2200 net/kcm/kcmsock.c:1029 sock_sendmsg_nosec net/socket.c:635 [inline] sock_sendmsg+0xca/0x110 net/socket.c:645 sock_write_iter+0x326/0x600 net/socket.c:848 new_sync_write fs/read_write.c:499 [inline] __vfs_write+0x483/0x740 fs/read_write.c:512 vfs_write+0x187/0x530 fs/read_write.c:560 SYSC_write fs/read_write.c:607 [inline] SyS_write+0xfb/0x230 fs/read_write.c:599 entry_SYSCALL_64_fastpath+0x1f/0xc2 when calling syscall(__NR_write, sock2, 0x208aaf27ul, 0x0ul) on a KCM seqpacket socket. It appears that kcm_sendmsg() does not handle len==0 case correctly, which causes an empty skb is allocated and queued. Fix this by skipping the skb allocation for len==0 case. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23Linux 4.9.12Greg Kroah-Hartman
2017-02-23videodev2.h: go back to limited range Y'CbCr for SRGB and, ADOBERGBHans Verkuil
commit 35879ee4769099905fa3bda0b21e73d434e2df6a upstream. This reverts 'commit 7e0739cd9c40 ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range"). The problem is that many drivers can convert R'G'B' content (often from sensors) to Y'CbCr, but they all produce limited range Y'CbCr. To stay backwards compatible the default quantization range for sRGB and AdobeRGB Y'CbCr encoding should be limited range, not full range, even though the corresponding standards specify full range. Update the V4L2_MAP_QUANTIZATION_DEFAULT define accordingly and also update the documentation. Fixes: 7e0739cd9c40 ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23bcache: Make gc wakeup sane, remove set_task_state()Kent Overstreet
commit be628be09563f8f6e81929efbd7cf3f45c344416 upstream. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Cc: Coly Li <colyli@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23ntb_transport: Pick an unused queueThomas VanSelus
commit 8fcd0950c021d7be8493280541332b924b9de962 upstream. Fix typo causing ntb_transport_create_queue to select the first queue every time, instead of using the next free queue. Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support") Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23ntb: ntb_perf missing dmaengine_unmap_putDave Jiang
commit 9644347c5240d0ee3ba7472ef332aaa4ff4db398 upstream. In the normal I/O execution path, ntb_perf is missing a call to dmaengine_unmap_put() after submission. That causes us to leak unmap objects. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Fixes: 8a7b6a77 ("ntb: ntb perf tool") Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23NTB: ntb_transport: fix debugfs_remove_recursiveAllen Hubbe
commit dd62245e73de9138333cb0e7a42c8bc1215c3ce6 upstream. The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level directory must not be later than debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory. Otherwise, the sub-level directory will not exist, and it would be invalid (panic) to attempt to remove it. This removes the top-level directory last, after sub-level directories have been cleaned up. Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com> Fixes: e26a5843f ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23timekeeping: Use deferred printk() in debug codeSergey Senozhatsky
commit f222449c9dfad7c9bb8cb53e64c5c407b172ebbc upstream. We cannot do printk() from tk_debug_account_sleep_time(), because tk_debug_account_sleep_time() is called under tk_core seq lock. The reason why printk() is unsafe there is that console_sem may invoke scheduler (up()->wake_up_process()->activate_task()), which, in turn, can return back to timekeeping code, for instance, via get_time()->ktime_get(), deadlocking the system on tk_core seq lock. [ 48.950592] ====================================================== [ 48.950622] [ INFO: possible circular locking dependency detected ] [ 48.950622] 4.10.0-rc7-next-20170213+ #101 Not tainted [ 48.950622] ------------------------------------------------------- [ 48.950622] kworker/0:0/3 is trying to acquire lock: [ 48.950653] (tk_core){----..}, at: [<c01cc624>] retrigger_next_event+0x4c/0x90 [ 48.950683] but task is already holding lock: [ 48.950683] (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90 [ 48.950714] which lock already depends on the new lock. [ 48.950714] the existing dependency chain (in reverse order) is: [ 48.950714] -> #5 (hrtimer_bases.lock){-.-...}: [ 48.950744] _raw_spin_lock_irqsave+0x50/0x64 [ 48.950775] lock_hrtimer_base+0x28/0x58 [ 48.950775] hrtimer_start_range_ns+0x20/0x5c8 [ 48.950775] __enqueue_rt_entity+0x320/0x360 [ 48.950805] enqueue_rt_entity+0x2c/0x44 [ 48.950805] enqueue_task_rt+0x24/0x94 [ 48.950836] ttwu_do_activate+0x54/0xc0 [ 48.950836] try_to_wake_up+0x248/0x5c8 [ 48.950836] __setup_irq+0x420/0x5f0 [ 48.950836] request_threaded_irq+0xdc/0x184 [ 48.950866] devm_request_threaded_irq+0x58/0xa4 [ 48.950866] omap_i2c_probe+0x530/0x6a0 [ 48.950897] platform_drv_probe+0x50/0xb0 [ 48.950897] driver_probe_device+0x1f8/0x2cc [ 48.950897] __driver_attach+0xc0/0xc4 [ 48.950927] bus_for_each_dev+0x6c/0xa0 [ 48.950927] bus_add_driver+0x100/0x210 [ 48.950927] driver_register+0x78/0xf4 [ 48.950958] do_one_initcall+0x3c/0x16c [ 48.950958] kernel_init_freeable+0x20c/0x2d8 [ 48.950958] kernel_init+0x8/0x110 [ 48.950988] ret_from_fork+0x14/0x24 [ 48.950988] -> #4 (&rt_b->rt_runtime_lock){-.-...}: [ 48.951019] _raw_spin_lock+0x40/0x50 [ 48.951019] rq_offline_rt+0x9c/0x2bc [ 48.951019] set_rq_offline.part.2+0x2c/0x58 [ 48.951049] rq_attach_root+0x134/0x144 [ 48.951049] cpu_attach_domain+0x18c/0x6f4 [ 48.951049] build_sched_domains+0xba4/0xd80 [ 48.951080] sched_init_smp+0x68/0x10c [ 48.951080] kernel_init_freeable+0x160/0x2d8 [ 48.951080] kernel_init+0x8/0x110 [ 48.951080] ret_from_fork+0x14/0x24 [ 48.951110] -> #3 (&rq->lock){-.-.-.}: [ 48.951110] _raw_spin_lock+0x40/0x50 [ 48.951141] task_fork_fair+0x30/0x124 [ 48.951141] sched_fork+0x194/0x2e0 [ 48.951141] copy_process.part.5+0x448/0x1a20 [ 48.951171] _do_fork+0x98/0x7e8 [ 48.951171] kernel_thread+0x2c/0x34 [ 48.951171] rest_init+0x1c/0x18c [ 48.951202] start_kernel+0x35c/0x3d4 [ 48.951202] 0x8000807c [ 48.951202] -> #2 (&p->pi_lock){-.-.-.}: [ 48.951232] _raw_spin_lock_irqsave+0x50/0x64 [ 48.951232] try_to_wake_up+0x30/0x5c8 [ 48.951232] up+0x4c/0x60 [ 48.951263] __up_console_sem+0x2c/0x58 [ 48.951263] console_unlock+0x3b4/0x650 [ 48.951263] vprintk_emit+0x270/0x474 [ 48.951293] vprintk_default+0x20/0x28 [ 48.951293] printk+0x20/0x30 [ 48.951324] kauditd_hold_skb+0x94/0xb8 [ 48.951324] kauditd_thread+0x1a4/0x56c [ 48.951324] kthread+0x104/0x148 [ 48.951354] ret_from_fork+0x14/0x24 [ 48.951354] -> #1 ((console_sem).lock){-.....}: [ 48.951385] _raw_spin_lock_irqsave+0x50/0x64 [ 48.951385] down_trylock+0xc/0x2c [ 48.951385] __down_trylock_console_sem+0x24/0x80 [ 48.951385] console_trylock+0x10/0x8c [ 48.951416] vprintk_emit+0x264/0x474 [ 48.951416] vprintk_default+0x20/0x28 [ 48.951416] printk+0x20/0x30 [ 48.951446] tk_debug_account_sleep_time+0x5c/0x70 [ 48.951446] __timekeeping_inject_sleeptime.constprop.3+0x170/0x1a0 [ 48.951446] timekeeping_resume+0x218/0x23c [ 48.951477] syscore_resume+0x94/0x42c [ 48.951477] suspend_enter+0x554/0x9b4 [ 48.951477] suspend_devices_and_enter+0xd8/0x4b4 [ 48.951507] enter_state+0x934/0xbd4 [ 48.951507] pm_suspend+0x14/0x70 [ 48.951507] state_store+0x68/0xc8 [ 48.951538] kernfs_fop_write+0xf4/0x1f8 [ 48.951538] __vfs_write+0x1c/0x114 [ 48.951538] vfs_write+0xa0/0x168 [ 48.951568] SyS_write+0x3c/0x90 [ 48.951568] __sys_trace_return+0x0/0x10 [ 48.951568] -> #0 (tk_core){----..}: [ 48.951599] lock_acquire+0xe0/0x294 [ 48.951599] ktime_get_update_offsets_now+0x5c/0x1d4 [ 48.951629] retrigger_next_event+0x4c/0x90 [ 48.951629] on_each_cpu+0x40/0x7c [ 48.951629] clock_was_set_work+0x14/0x20 [ 48.951660] process_one_work+0x2b4/0x808 [ 48.951660] worker_thread+0x3c/0x550 [ 48.951660] kthread+0x104/0x148 [ 48.951690] ret_from_fork+0x14/0x24 [ 48.951690] other info that might help us debug this: [ 48.951690] Chain exists of: tk_core --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock [ 48.951721] Possible unsafe locking scenario: [ 48.951721] CPU0 CPU1 [ 48.951721] ---- ---- [ 48.951721] lock(hrtimer_bases.lock); [ 48.951751] lock(&rt_b->rt_runtime_lock); [ 48.951751] lock(hrtimer_bases.lock); [ 48.951751] lock(tk_core); [ 48.951782] *** DEADLOCK *** [ 48.951782] 3 locks held by kworker/0:0/3: [ 48.951782] #0: ("events"){.+.+.+}, at: [<c0156590>] process_one_work+0x1f8/0x808 [ 48.951812] #1: (hrtimer_work){+.+...}, at: [<c0156590>] process_one_work+0x1f8/0x808 [ 48.951843] #2: (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90 [ 48.951843] stack backtrace: [ 48.951873] CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.10.0-rc7-next-20170213+ [ 48.951904] Workqueue: events clock_was_set_work [ 48.951904] [<c0110208>] (unwind_backtrace) from [<c010c224>] (show_stack+0x10/0x14) [ 48.951934] [<c010c224>] (show_stack) from [<c04ca6c0>] (dump_stack+0xac/0xe0) [ 48.951934] [<c04ca6c0>] (dump_stack) from [<c019b5cc>] (print_circular_bug+0x1d0/0x308) [ 48.951965] [<c019b5cc>] (print_circular_bug) from [<c019d2a8>] (validate_chain+0xf50/0x1324) [ 48.951965] [<c019d2a8>] (validate_chain) from [<c019ec18>] (__lock_acquire+0x468/0x7e8) [ 48.951995] [<c019ec18>] (__lock_acquire) from [<c019f634>] (lock_acquire+0xe0/0x294) [ 48.951995] [<c019f634>] (lock_acquire) from [<c01d0ea0>] (ktime_get_update_offsets_now+0x5c/0x1d4) [ 48.952026] [<c01d0ea0>] (ktime_get_update_offsets_now) from [<c01cc624>] (retrigger_next_event+0x4c/0x90) [ 48.952026] [<c01cc624>] (retrigger_next_event) from [<c01e4e24>] (on_each_cpu+0x40/0x7c) [ 48.952056] [<c01e4e24>] (on_each_cpu) from [<c01cafc4>] (clock_was_set_work+0x14/0x20) [ 48.952056] [<c01cafc4>] (clock_was_set_work) from [<c015664c>] (process_one_work+0x2b4/0x808) [ 48.952087] [<c015664c>] (process_one_work) from [<c0157774>] (worker_thread+0x3c/0x550) [ 48.952087] [<c0157774>] (worker_thread) from [<c015d644>] (kthread+0x104/0x148) [ 48.952087] [<c015d644>] (kthread) from [<c0107830>] (ret_from_fork+0x14/0x24) Replace printk() with printk_deferred(), which does not call into the scheduler. Fixes: 0bf43f15db85 ("timekeeping: Prints the amounts of time spent during suspend") Reported-and-tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23printk: use rcuidle console tracepointSergey Senozhatsky
commit fc98c3c8c9dcafd67adcce69e6ce3191d5306c9c upstream. Use rcuidle console tracepoint because, apparently, it may be issued from an idle CPU: hw-breakpoint: Failed to enable monitor mode on CPU 0. hw-breakpoint: CPU 0 failed to disable vector catch =============================== [ ERR: suspicious RCU usage. ] 4.10.0-rc8-next-20170215+ #119 Not tainted ------------------------------- ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 2, debug_locks = 0 RCU used illegally from extended quiescent state! 2 locks held by swapper/0/0: #0: (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54 #1: (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119 Hardware name: Generic OMAP4 (Flattened Device Tree) console_unlock vprintk_emit vprintk_default printk reset_ctrl_regs dbg_cpu_pm_notify notifier_call_chain cpu_pm_exit omap_enter_idle_coupled cpuidle_enter_state cpuidle_enter_state_coupled do_idle cpu_startup_entry start_kernel This RCU warning, however, is suppressed by lockdep_off() in printk(). lockdep_off() increments the ->lockdep_recursion counter and thus disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want lockdep to be enabled "current->lockdep_recursion == 0". Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <rmk@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23PCI/PME: Restore pcie_pme_driver.removeYinghai Lu
commit afe3e4d11bdf50a4c3965eb6465ba6bebbcf5dcf upstream. In addition to making PME non-modular, d7def2040077 ("PCI/PME: Make explicitly non-modular") removed the pcie_pme_driver .remove() method, pcie_pme_remove(). pcie_pme_remove() freed the PME IRQ that was requested in pci_pme_probe(). The fact that we don't free the IRQ after d7def2040077 causes the following crash when removing a PCIe port device via /sys: ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:370! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 14509 Comm: sh Tainted: G W 4.8.0-rc1-yh-00012-gd29438d RIP: 0010:[<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190 ... Call Trace: [<ffffffff9758cda4>] pci_disable_msi+0x34/0x40 [<ffffffff97583817>] cleanup_service_irqs+0x27/0x30 [<ffffffff97583e9a>] pcie_port_device_remove+0x2a/0x40 [<ffffffff97584250>] pcie_portdrv_remove+0x40/0x50 [<ffffffff97576d7b>] pci_device_remove+0x4b/0xc0 [<ffffffff9785ebe6>] __device_release_driver+0xb6/0x150 [<ffffffff9785eca5>] device_release_driver+0x25/0x40 [<ffffffff975702e4>] pci_stop_bus_device+0x74/0xa0 [<ffffffff975704ea>] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [<ffffffff97578810>] remove_store+0x50/0x70 [<ffffffff9785a378>] dev_attr_store+0x18/0x30 [<ffffffff97260b64>] sysfs_kf_write+0x44/0x60 [<ffffffff9725feae>] kernfs_fop_write+0x10e/0x190 [<ffffffff971e13f8>] __vfs_write+0x28/0x110 [<ffffffff970b0fa4>] ? percpu_down_read+0x44/0x80 [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0 [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0 [<ffffffff971e1f04>] vfs_write+0xc4/0x180 [<ffffffff971e3089>] SyS_write+0x49/0xa0 [<ffffffff97001a46>] do_syscall_64+0xa6/0x1b0 [<ffffffff9819201e>] entry_SYSCALL64_slow_path+0x25/0x25 ... RIP [<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190 RSP <ffff89ad3085bc48> ---[ end trace f4505e1dac5b95d3 ]--- Segmentation fault Restore pcie_pme_remove(). [bhelgaas: changelog] Fixes: d7def2040077 ("PCI/PME: Make explicitly non-modular") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23Revert "i2c: designware: detect when dynamic tar update is possible"Jarkko Nikula
commit 12688dc21f71f4dcc9e2b8b5556b0c6cc8df1491 upstream. This reverts commit 63d0f0a6952a1a02bc4f116b7da7c7887e46efa3. It caused a regression on platforms where I2C controller is synthesized with dynamic TAR update disabled. Detection code is testing is bit DW_IC_CON_10BITADDR_MASTER in register DW_IC_CON read-only but fails to restore original value in case bit is read-write. Instead of fixing this we revert the commit since it was preparation for the commit 0317e6c0f1dc ("i2c: designware: do not disable adapter after transfer") which was also reverted. Reported-by: Shah Nehal-Bakulchandra <Nehal-bakulchandra.Shah@amd.com> Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-By: Lucas De Marchi <lucas.demarchi@intel.com> Fixes: 63d0f0a6952a ("i2c: designware: detect when dynamic tar update is possible") Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()Kees Cook
commit 9e3440481845b2ec22508f60837ee2cab2b6054f upstream. The 64-bit get_user() wasn't clearing the high word due to a typo in the error handler. The exception handler entry was already correct, though. Noticed during recent usercopy test additions in lib/test_user_copy.c. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23futex: Move futex_init() to core_initcallYang Yang
commit 25f71d1c3e98ef0e52371746220d66458eac75bc upstream. The UEVENT user mode helper is enabled before the initcalls are executed and is available when the root filesystem has been mounted. The user mode helper is triggered by device init calls and the executable might use the futex syscall. futex_init() is marked __initcall which maps to device_initcall, but there is no guarantee that futex_init() is invoked _before_ the first device init call which triggers the UEVENT user mode helper. If the user mode helper uses the futex syscall before futex_init() then the syscall crashes with a NULL pointer dereference because the futex subsystem has not been initialized yet. Move futex_init() to core_initcall so futexes are initialized before the root filesystem is mounted and the usermode helper becomes available. [ tglx: Rewrote changelog ] Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Cc: jiang.biao2@zte.com.cn Cc: jiang.zhengxiong@zte.com.cn Cc: zhong.weidong@zte.com.cn Cc: deng.huali@zte.com.cn Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1483085875-6130-1-git-send-email-yang.yang29@zte.com.cn Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23drm/dp/mst: fix kernel oops when turning off secondary monitorPierre-Louis Bossart
commit bb08c04dc867b5f392caec635c097d5d5fcd8c9f upstream. 100% reproducible issue found on SKL SkullCanyon NUC with two external DP daisy-chained monitors in DP/MST mode. When turning off or changing the input of the second monitor the machine stops with a kernel oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly. This issue is traced to an inconsistent control flow in drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the same time as 'req_payload.num_slots' is set to zero, but the pointer is dereferenced even when req_payload.num_slot is zero. The problematic dereference was introduced in commit dfda0df34 ("drm/mst: rework payload table allocation to conform better") and may impact all versions since v3.18 The fix suggested by Chris Wilson removes the kernel oops and was found to work well after 10mn of monkey-testing with the second monitor power and input buttons Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990 Fixes: dfda0df34264 ("drm/mst: rework payload table allocation to conform better.") Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Tested-by: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursorMichel Dänzer
commit d74c67dd7800fc7aae381f272875c337f268806c upstream. The crtc_h/vdisplay fields may not match the CRTC viewport dimensions with special modes such as interlaced ones. Fixes the HW cursor disappearing in the bottom half of the screen with interlaced modes. Fixes: 6b16cf7785a4 ("drm/radeon: Hide the HW cursor while it's out of bounds") Reported-by: Ashutosh Kumar <ashutosh.kumar@amd.com> Tested-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23Input: elan_i2c - add ELAN0605 to the ACPI tableIHARA Hiroka
commit 722c5ac708b4f5c1fcfad5fed4c95234c8b06590 upstream. ELAN0605 has been confirmed to be a variant of ELAN0600, which is blacklisted in the hid-core to be managed by elan_i2c. This device can be found in Lenovo ideapad 310s (80U4000). Signed-off-by: Hiroka IHARA <ihara_h@live.jp> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23Fix missing sanity check in /dev/sgAl Viro
commit 137d01df511b3afe1f05499aea05f3bafc0fb221 upstream. What happens is that a write to /dev/sg is given a request with non-zero ->iovec_count combined with zero ->dxfer_len. Or with ->dxferp pointing to an array full of empty iovecs. Having write permission to /dev/sg shouldn't be equivalent to the ability to trigger BUG_ON() while holding spinlocks... Found by Dmitry Vyukov and syzkaller. [ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the underlying issue. - Linus ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23scsi: don't BUG_ON() empty DMA transfersJohannes Thumshirn
commit fd3fc0b4d7305fa7246622dcc0dec69c42443f45 upstream. Don't crash the machine just because of an empty transfer. Use WARN_ON() combined with returning an error. Found by Dmitry Vyukov and syzkaller. [ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON() might still be a cause of excessive log spamming. NOTE! If this warning ever triggers, we may end up leaking resources, since this doesn't bother to try to clean the command up. So this WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is much worse. People really need to stop using BUG_ON() for "this shouldn't ever happen". It makes pretty much any bug worse. - Linus ] Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: James Bottomley <jejb@linux.vnet.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23powerpc/64: Disable use of radix under a hypervisorPaul Mackerras
commit 3f91a89d424a79f8082525db5a375e438887bb3e upstream. Currently, if the kernel is running on a POWER9 processor under a hypervisor, it may try to use the radix MMU even though it doesn't have the necessary code to do so (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). If the hypervisor supports both radix and HPT, then it will set up the guest to use HPT (since the guest doesn't request radix in the CAS call), but if the radix feature bit is set in the ibm,pa-features property (which is valid, since ibm,pa-features is defined to represent the capabilities of the processor) the guest will try to use radix, resulting in a crash when it turns the MMU on. This makes the minimal fix for the current code, which is to disable radix unless we are running in hypervisor mode. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23mmc: core: fix multi-bit bus width without high-speed modeAnssi Hannula
commit 3d4ef329757cfd5e0b23cce97cdeca7e2df89c99 upstream. Commit 577fb13199b1 ("mmc: rework selection of bus speed mode") refactored bus width selection code to mmc_select_bus_width(). However, it also altered the behavior to not call the selection code in non-high-speed modes anymore. This causes 1-bit mode to always be used when the high-speed mode is not enabled, even though 4-bit and 8-bit bus are valid bus widths in the backwards-compatibility (legacy) mode as well (see e.g. 5.3.2 Bus Speed Modes in JEDEC 84-B50). This results in a significant regression in transfer speeds. Fix the code to allow 4-bit and 8-bit widths even without high-speed mode, as before. Tested with a Zynq-7000 PicoZed 7020 board. Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23fuse: fix uninitialized flags in pipe_bufferMiklos Szeredi
commit 84588a93d097bace24b9233930f82511d4f34210 upstream. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: d82718e348fe ("fuse_dev_splice_read(): switch to add_to_pipe()") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23fuse: fix use after free issue in fuse_dev_do_read()Sahitya Tummala
commit 6ba4d2722d06960102c981322035239cd66f7316 upstream. There is a potential race between fuse_dev_do_write() and request_wait_answer() contexts as shown below: TASK 1: __fuse_request_send(): |--spin_lock(&fiq->waitq.lock); |--queue_request(); |--spin_unlock(&fiq->waitq.lock); |--request_wait_answer(): |--if (test_bit(FR_SENT, &req->flags)) <gets pre-empted after it is validated true> TASK 2: fuse_dev_do_write(): |--clears bit FR_SENT, |--request_end(): |--sets bit FR_FINISHED |--spin_lock(&fiq->waitq.lock); |--list_del_init(&req->intr_entry); |--spin_unlock(&fiq->waitq.lock); |--fuse_put_request(); |--queue_interrupt(); <request gets queued to interrupts list> |--wake_up_locked(&fiq->waitq); |--wait_event_freezable(); <as FR_FINISHED is set, it returns and then the caller frees this request> Now, the next fuse_dev_do_read(), see interrupts list is not empty and then calls fuse_read_interrupt() which tries to access the request which is already free'd and gets the below crash: [11432.401266] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b6b ... [11432.418518] Kernel BUG at ffffff80083720e0 [11432.456168] PC is at __list_del_entry+0x6c/0xc4 [11432.463573] LR is at fuse_dev_do_read+0x1ac/0x474 ... [11432.679999] [<ffffff80083720e0>] __list_del_entry+0x6c/0xc4 [11432.687794] [<ffffff80082c65e0>] fuse_dev_do_read+0x1ac/0x474 [11432.693180] [<ffffff80082c6b14>] fuse_dev_read+0x6c/0x78 [11432.699082] [<ffffff80081d5638>] __vfs_read+0xc0/0xe8 [11432.704459] [<ffffff80081d5efc>] vfs_read+0x90/0x108 [11432.709406] [<ffffff80081d67f0>] SyS_read+0x58/0x94 As FR_FINISHED bit is set before deleting the intr_entry with input queue lock in request completion path, do the testing of this flag and queueing atomically with the same lock in queue_interrupt(). Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23siano: make it work again with CONFIG_VMAP_STACKMauro Carvalho Chehab
commit f9c85ee67164b37f9296eab3b754e543e4e96a1c upstream. Reported as a Kaffeine bug: https://bugs.kde.org/show_bug.cgi?id=375811 The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On Kernel 4.9, the default is to not accept DMA on stack anymore on x86 architecture. On other architectures, this has been a requirement since Kernel 2.2. So, after this patch, this driver should likely work fine on all archs. Tested with USB ID 2040:5510: Hauppauge Windham Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23vfs: fix uninitialized flags in splice_to_pipe()Miklos Szeredi
commit 5a81e6a171cdbd1fa8bc1fdd80c23d3d71816fac upstream. Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the unused part of the pipe ring buffer. Previously splice_to_pipe() left the flags value alone, which could result in incorrect behavior. Uninitialized flags appears to have been there from the introduction of the splice syscall. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-18Linux 4.9.11Greg Kroah-Hartman
generated by cgit v0.10.2 at 2024-07-03 20:32:46 (GMT)