| Age | Commit message (Collapse) | Author |
|---|
|
There are various internal FPU state debugging checks that never
trigger in practice, but which are useful for FPU code development.
Separate these out into CONFIG_X86_DEBUG_FPU=y, and also add a
couple of new ones.
The size difference is about 0.5K of code on defconfig:
text data bss filename
15028906 2578816 1638400 vmlinux
15029430 2578816 1638400 vmlinux
( Keep this enabled by default until the new FPU code is debugged. )
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
I tried to simulate an ancient CPU via this option, and
found that it still has fxsr_opt enabled, confusing the
FPU code.
Make the 'nofxsr' option also clear FXSR_OPT flag.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This cleans up the call sites and the function a bit,
and also makes it more symmetric with the other high
level FPU state handling functions.
It's still only valid for the current task, as we copy
to the FPU registers of the current CPU.
No change in functionality.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Now that all the FPU init function call dependencies are
cleaned up we can propagate __init annotations deeper.
This shrinks the runtime size of the kernel a bit, and
also addresses a few section warnings.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So call setup_xstate_comp() from the xstate init code, not
from the generic fpu__init_system() code.
This allows us to remove the protytype from xstate.h as well.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Put MPX support into its separate high level structure, and
also replace the fixed YMM, LWP and MPX structures in
xregs_state with just reservations - their exact offsets
in the structure will depend on the CPU and no code actually
relies on those fields.
No change in functionality.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The current xstate code in setup_xstate_features() assumes that
the first zero bit means the end of xfeatures - but that is not
so, the SDM clearly states that an arbitrary set of xfeatures
might be enabled - and it is also clear from the description
of the compaction feature that holes are possible:
"13-6 Vol. 1MANAGING STATE USING THE XSAVE FEATURE SET
[...]
Compacted format. Each state component i (i ≥ 2) is located at a byte
offset from the base address of the XSAVE area based on the XCOMP_BV
field in the XSAVE header:
— If XCOMP_BV[i] = 0, state component i is not in the XSAVE area.
— If XCOMP_BV[i] = 1, the following items apply:
• If XCOMP_BV[j] = 0 for every j, 2 ≤ j < i, state component i is
located at a byte offset 576 from the base address of the XSAVE
area. (This item applies if i is the first bit set in bits 62:2 of
the XCOMP_BV; it implies that state component i is located at the
beginning of the extended region.)
• Otherwise, let j, 2 ≤ j < i, be the greatest value such that
XCOMP_BV[j] = 1. Then state component i is located at a byte offset
X from the location of state component j, where X is the number of
bytes required for state component j as enumerated in
CPUID.(EAX=0DH,ECX=j):EAX. (This item implies that state component i
immediately follows the preceding state component whose bit is set
in XCOMP_BV.)"
So don't assume that the first zero xfeatures bit means the end of
all xfeatures - iterate through all of them.
I'm not aware of hardware that triggers this currently.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
kernel_fpu_begin() is __kernel_fpu_begin() with a preempt_disable().
Move the kernel_fpu_begin() debugging check into __kernel_fpu_begin(),
so that users of __kernel_fpu_begin() may benefit from it as well.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Document all the structures that make up 'struct fpu'.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
comments
Improve the memory layout of 'struct fpu':
- change ->fpregs_active from 'int' to 'char' - it's just a single flag
and modern x86 CPUs can do efficient byte accesses.
- pack related fields closer to each other: often 'fpu->state' will not be
touched, while the other fields will - so pack them into a group.
Also add comments to each field, describing their purpose, and add
some background information about lazy restores.
Also fix an obsolete, lazy switching related comment in fpu_copy()'s description.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use these consistent names:
struct fregs_state # was: i387_fsave_struct
struct fxregs_state # was: i387_fxsave_struct
struct swregs_state # was: i387_soft_struct
struct xregs_state # was: xsave_struct
union fpregs_state # was: thread_xstate
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So much of fpu/core.c is the regset code, but it just obscures the generic
FPU state machine logic. Factor out the regset code into fpu/regset.c, where
it can be read in isolation.
This affects one API: fpu__activate_stopped() has to be made available
from the core to fpu/regset.c.
No change in functionality.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
fpu/xstate.c has a lot of generic FPU signal frame handling routines,
move them into a separate file: fpu/signal.c.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Standardize the naming of the various functions that copy register
content in specific FPU context formats:
copy_fxregs_to_kernel() # was: fpu_fxsave()
copy_xregs_to_kernel() # was: xsave_state()
copy_kernel_to_fregs() # was: frstor_checking()
copy_kernel_to_fxregs() # was: fxrstor_checking()
copy_kernel_to_xregs() # was: fpu_xrstor_checking()
copy_kernel_to_xregs_booting() # was: xrstor_state_booting()
copy_fregs_to_user() # was: fsave_user()
copy_fxregs_to_user() # was: fxsave_user()
copy_xregs_to_user() # was: xsave_user()
copy_user_to_fregs() # was: frstor_user()
copy_user_to_fxregs() # was: fxrstor_user()
copy_user_to_xregs() # was: xrestore_user()
copy_user_to_fpregs_zeroing() # was: restore_user_xstate()
Eliminate fpu_xrstor_checking(), because it was just a wrapper.
No change in functionality.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Move restore_init_xstate() next to its sole caller.
Also rename it to copy_init_fpstate_to_fpregs() and add
some comments about what it does.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So the handling of init_xstate_ctx has a layering violation: both
'struct xsave_struct' and 'union thread_xstate' have a
'struct i387_fxsave_struct' member:
xsave_struct::i387
thread_xstate::fxsave
The handling of init_xstate_ctx is generic, it is used on all
CPUs, with or without XSAVE instruction. So it's confusing how
the generic code passes around and handles an XSAVE specific
format.
What we really want is for init_xstate_ctx to be a proper
fpstate and we use its ::fxsave and ::xsave members, as
appropriate.
Since the xsave_struct::i387 and thread_xstate::fxsave aliases
each other this is not a functional problem.
So implement this, and move init_xstate_ctx to the generic FPU
code in the process.
Also, since init_xstate_ctx is not XSAVE specific anymore,
rename it to init_fpstate, and mark it __read_mostly,
because it's only modified once during bootup, and used
as a reference fpstate later on.
There's no change in functionality.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
fpstate_init() only uses fpu->state, so pass that in to it.
This enables the cleanup we will do in the next patch.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Harmonize the inconsistent naming of these related functions:
fpstate_init()
finit_soft_fpu() => fpstate_init_fsoft()
fx_finit() => fpstate_init_fxstate()
fx_finit() => fpstate_init_fstate() # split out
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Factor out the FPU error code handling code from traps.c and fpu/internal.h
and move them close to each other.
Also convert the helper functions to 'struct fpu *', which further simplifies
them.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove various boot quirks that came from the old code.
The new code is cleanly split up into per-system and per-cpu
init sequences, and system init functions are only called once.
Remove the run-once quirks.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Only a few places use the regset definitions, so factor them out.
Also fix related header dependency assumptions.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
handling functions
Most of the FPU does not use them, so split it out and include
them in signal.c and ia32_signal.c
Also fix header file dependency assumption in fpu/core.c.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Move them to their only user. This makes the code easier to read,
the header is less cluttered, and it also speeds up the build a bit.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With recent cleanups and fixes the fpu__reset() and fpu__clear()
functions have become almost identical in functionality: the only
difference is that fpu__reset() assumed that the fpstate
was already active in the eagerfpu case, while fpu__clear()
activated it if it was inactive.
This distinction almost never matters, the only case where such
fpstate activation happens if if the init thread (PID 1) gets exec()-ed
for the first time.
So keep fpu__clear() and change all fpu__reset() uses to
fpu__clear() to simpify the logic.
( In a later patch we'll further simplify fpu__clear() by making
sure that all contexts it is called on are already active. )
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Consolidate more signal frame related functions:
text data bss dec filename
14108070 2575280 1634304 18317654 vmlinux.before
14107944 2575344 1634304 18317592 vmlinux.after
Also, while moving it, rename alloc_mathframe() to fpu__alloc_mathframe().
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
restore_xstate_sig() is a misnomer: it's not limited to 'xstate' at all,
it is the high level 'restore FPU state from a signal frame' function
that works with all legacy FPU formats as well.
Rename it (and its helper) accordingly, and also move it to the
fpu__*() namespace.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Do it like all other high level FPU state handling functions: they
only know about struct fpu, not about the task.
(Also remove a dead prototype while at it.)
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The fpu__*() methods are closely related, but they are defined
in scattered places within the FPU code.
Concentrate them, and also uninline fpu__save(), fpu__drop()
and fpu__reset() to save about 5K of kernel text on 64-bit kernels:
text data bss dec filename
14113063 2575280 1634304 18322647 vmlinux.before
14108070 2575280 1634304 18317654 vmlinux.after
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
fpu_restore_checking() is a helper function of restore_fpu_checking(),
but this is not apparent from the naming.
Both copy fpstate contents to fpregs, while the fuller variant does
a full copy without leaking information.
So rename them to:
copy_fpstate_to_fpregs()
__copy_fpstate_to_fpregs()
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
drop_fpu() and fpu_reset_state() are similar in functionality
and in scope, yet this is not apparent from their names.
drop_fpu() deactivates FPU contents (both the fpregs and the fpstate),
but leaves register contents intact in the eager-FPU case, mostly as an
optimization. It disables fpregs in the lazy FPU case. The drop_fpu()
method can be used to destroy FPU state in an optimized way, when we
know that a new state will be loaded before user-space might see
any remains of the old FPU state:
- such as in sys_exit()'s exit_thread() where we know this task
won't execute any user-space instructions anymore and the
next context switch cleans up the FPU. The old FPU state
might still be around in the eagerfpu case but won't be
saved.
- in __restore_xstate_sig(), where we use drop_fpu() before
copying a new state into the fpstate and activating that one.
No user-pace instructions can execute between those steps.
- in sys_execve()'s fpu__clear(): there we use drop_fpu() in
the !eagerfpu case, where it's equivalent to a full reinit.
fpu_reset_state() is a stronger version of drop_fpu(): both in
the eagerfpu and the lazy-FPU case it guarantees that fpregs
are reinitialized to init state. This method is used in cases
where we need a full reset:
- handle_signal() uses fpu_reset_state() to reset the FPU state
to init before executing a user-space signal handler. While we
have already saved the original FPU state at this point, and
always restore the original state, the signal handling code
still has to do this reinit, because signals may interrupt
any user-space instruction, and the FPU might be in various
intermediate states (such as an unbalanced x87 stack) that is
not immediately usable for general C signal handler code.
- __restore_xstate_sig() uses fpu_reset_state() when the signal
frame has no FP context. Since the signal handler may have
modified the FPU state, it gets reset back to init state.
- in another branch __restore_xstate_sig() uses fpu_reset_state()
to handle a restoration error: when restore_user_xstate() fails
to restore FPU state and we might have inconsistent FPU data,
fpu_reset_state() is used to reset it back to a known good
state.
- __kernel_fpu_end() uses fpu_reset_state() in an error branch.
This is in a 'must not trigger' error branch, so on bug-free
kernels this never triggers.
- fpu__restore() uses fpu_reset_state() in an error path
as well: if the fpstate was set up with invalid FPU state
(via ptrace or via a signal handler), then it's reset back
to init state.
- likewise, the scheduler's switch_fpu_finish() uses it in a
restoration error path too.
Move both drop_fpu() and fpu_reset_state() to the fpu__*() namespace
and harmonize their naming with their function:
fpu__drop()
fpu__reset()
This clearly shows that both methods operate on the full state of the
FPU, just like fpu__restore().
Also add comments to explain what each function does.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
in xsave_state()
We'd like to use xsave_state() earlier, but its SYSTEM_BOOTING check
is too imprecise.
The real condition that xsave_state() would like to check is whether
alternative XSAVE instructions were patched into the kernel image
already.
Add such a (read-mostly) debug flag and use it in xsave_state().
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So prior to this fix:
c88d47480d30 ("x86/fpu: Always restore_xinit_state() when use_eager_cpu()")
we leaked FPU state across execve() boundaries on eagerfpu systems:
$ /host/home/mingo/dump-xmm-regs-exec
# XMM state before execve():
XMM0 : 000000000000dede
XMM1 : 000000000000dedf
XMM2 : 000000000000dee0
XMM3 : 000000000000dee1
XMM4 : 000000000000dee2
XMM5 : 000000000000dee3
XMM6 : 000000000000dee4
XMM7 : 000000000000dee5
XMM8 : 000000000000dee6
XMM9 : 000000000000dee7
XMM10: 000000000000dee8
XMM11: 000000000000dee9
XMM12: 000000000000deea
XMM13: 000000000000deeb
XMM14: 000000000000deec
XMM15: 000000000000deed
# XMM state after execve(), in the new task context:
XMM0 : 0000000000000000
XMM1 : 2f2f2f2f2f2f2f2f
XMM2 : 0000000000000000
XMM3 : 0000000000000000
XMM4 : 00000000000000ff
XMM5 : 00000000ff000000
XMM6 : 000000000000dee4
XMM7 : 000000000000dee5
XMM8 : 0000000000000000
XMM9 : 0000000000000000
XMM10: 0000000000000000
XMM11: 0000000000000000
XMM12: 0000000000000000
XMM13: 000000000000deeb
XMM14: 000000000000deec
XMM15: 000000000000deed
Better explain what this function is supposed to do and why.
Reviewed-by: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
FPU fpregs do not get initialized during bootup on secondary CPUs,
on non-xsave capable CPUs.
For example on one of my systems, the secondary CPU has this FPU
state on bootup:
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86/fpu ######################
x86/fpu # FPU register dump on CPU#1:
x86/fpu # ... CWD: ffff0040
x86/fpu # ... SWD: ffff0000
x86/fpu # ... TWD: ffff555a
x86/fpu # ... FIP: 00000000
x86/fpu # ... FCS: 00000000
x86/fpu # ... FOO: 00000000
x86/fpu # ... FOS: ffff0000
x86/fpu # ... FP0: 02 57 00 00 00 00 00 00 ff ff
x86/fpu # ... FP1: 1b e2 00 00 00 00 00 00 ff ff
x86/fpu # ... FP2: 00 00 00 00 00 00 00 00 00 00
x86/fpu # ... FP3: 00 00 00 00 00 00 00 00 00 00
x86/fpu # ... FP4: 00 00 00 00 00 00 00 00 00 00
x86/fpu # ... FP5: 00 00 00 00 00 00 00 00 00 00
x86/fpu # ... FP6: 00 00 00 00 00 00 00 00 00 00
x86/fpu # ... FP7: 00 00 00 00 00 00 00 00 00 00
x86/fpu # ... SW: dadadada
x86/fpu ######################
Note how CWD and TWD are off their usual init state (0x037f and 0xffff),
and how FP0 and FP1 has non-zero content.
This is normally not a problem, because any user-space FPU state
is initalized properly - but it can complicate the use of FPU
instructions in kernel code via kernel_fpu_begin()/end(): if
the FPU using code does not initialize registers itself, it
might generate spurious exceptions depending on which CPU it
executes on.
Fix this by initializing the x87 state via the FNINIT instruction.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rename this function in line with the new FPU nomenclature.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So this function still had ancient language about 'saving current
math information' - but we haven't been doing lazy FPU saves for
quite some time, we are doing lazy FPU restores.
Also remove IRQ13 related comment, which we don't support anymore
either.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Move the naming in line with existing names, so that we now have:
copy_fpregs_to_fpstate()
copy_fpstate_to_sigframe()
copy_fpregs_to_sigframe()
... where each function does what its name suggests.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Standardize the naming of save_xstate_sig() by renaming it to
copy_fpstate_to_sigframe(): this tells us at a glance that
the function copies an FPU fpstate to a signal frame.
This naming also follows the naming of copy_fpregs_to_fpstate().
Don't put 'xstate' into the name: since this is a generic name,
it's expected that the function is able to handle xstate frames
as well, beyond legacy frames.
xstate used to be the odd case in the x86 FPU code - now it's the
common case.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently fpstate_sanitize_xstate() has a task_struct input parameter,
but it only uses the fpu structure from it - so pass in a 'struct fpu'
pointer only and update all call sites.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove the extra layer of __fpstate_sanitize_xstate():
if (!use_xsaveopt())
return;
__fpstate_sanitize_xstate(tsk);
and move the check for use_xsaveopt() into fpstate_sanitize_xstate().
In general we optimize for the presence of CPU features, not for
the absence of them. Furthermore there's little point in this inlining,
as the call sites are not super hot code paths.
Doing this uninlining shrinks the code a bit:
text data bss dec hex filename
14108751 2573624 1634304 18316679 1177d87 vmlinux.before
14108627 2573624 1634304 18316555 1177d0b vmlinux.after
Also remove a pointless '!fx' check from fpstate_sanitize_xstate().
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So the sanitize_i387_state() function has the following purpose:
on CPUs that support optimized xstate saving instructions, an
FPU fpstate might end up having partially uninitialized data.
This function initializes that data.
Note that the function name is a misnomer and confusing on two levels,
not only is it not i387 specific at all, but it is the exact opposite:
it only matters on xstate CPUs.
So rename sanitize_i387_state() and __sanitize_i387_state() to
fpstate_sanitize_xstate() and __fpstate_sanitize_xstate(),
to clearly express the purpose and usage of the function.
We'll further clean up this function in the next patch.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Now that all FPU internals using drivers are converted to public APIs,
move xcr.h's definitions into fpu/internal.h and remove xcr.h.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This file only uses the public FPU APIs, so remove the xcr.h, fpu/xstate.h
and fpu/internal.h headers and add the fpu/api.h include.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use the new 'cpu_has_xfeatures()' function to query AVX CPU support.
This has the following advantages to the driver:
- Decouples the driver from FPU internals: it's now only using <asm/fpu/api.h>.
- Removes detection complexity from the driver, no more raw XGETBV instruction
- Shrinks the code a bit.
- Standardizes feature name error message printouts across drivers
There are also advantages to the x86 FPU code: once all drivers
are decoupled from internals we can move them out of common
headers and we'll also be able to remove xcr.h.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
checks
Use the new 'cpu_has_xfeatures()' function to query AVX CPU support.
This has the following advantages to the driver:
- Decouples the driver from FPU internals: it's now only using <asm/fpu/api.h>.
- Removes detection complexity from the driver, no more raw XGETBV instruction
- Shrinks the code a bit.
- Standardizes feature name error message printouts across drivers
There are also advantages to the x86 FPU code: once all drivers
are decoupled from internals we can move them out of common
headers and we'll also be able to remove xcr.h.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use the new 'cpu_has_xfeatures()' function to query AVX CPU support.
This has the following advantages to the driver:
- Decouples the driver from FPU internals: it's now only using <asm/fpu/api.h>.
- Removes detection complexity from the driver, no more raw XGETBV instruction
- Shrinks the code a bit.
- Standardizes feature name error message printouts across drivers
There are also advantages to the x86 FPU code: once all drivers
are decoupled from internals we can move them out of common
headers and we'll also be able to remove xcr.h.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
xfeature checks
Use the new 'cpu_has_xfeatures()' function to query AVX CPU support.
This has the following advantages to the driver:
- Decouples the driver from FPU internals: it's now only using <asm/fpu/api.h>.
- Removes detection complexity from the driver, no more raw XGETBV instruction
- Shrinks the code a bit.
- Standardizes feature name error message printouts across drivers
There are also advantages to the x86 FPU code: once all drivers
are decoupled from internals we can move them out of common
headers and we'll also be able to remove xcr.h.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use the new 'cpu_has_xfeatures()' function to query AVX CPU support.
This has the following advantages to the driver:
- Decouples the driver from FPU internals: it's now only using <asm/fpu/api.h>.
- Removes detection complexity from the driver, no more raw XGETBV instruction
- Shrinks the code a bit.
- Standardizes feature name error message printouts across drivers
There are also advantages to the x86 FPU code: once all drivers
are decoupled from internals we can move them out of common
headers and we'll also be able to remove xcr.h.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use the new 'cpu_has_xfeatures()' function to query AVX CPU support.
This has the following advantages to the driver:
- Decouples the driver from FPU internals: it's now only using <asm/fpu/api.h>.
- Removes detection complexity from the driver, no more raw XGETBV instruction
- Shrinks the code a bit.
- Standardizes feature name error message printouts across drivers
There are also advantages to the x86 FPU code: once all drivers
are decoupled from internals we can move them out of common
headers and we'll also be able to remove xcr.h.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use the new 'cpu_has_xfeatures()' function to query AVX CPU support.
This has the following advantages to the driver:
- Decouples the driver from FPU internals: it's now only using <asm/fpu/api.h>.
- Removes detection complexity from the driver, no more raw XGETBV instruction
- Shrinks the code a bit.
- Standardizes feature name error message printouts across drivers
There are also advantages to the x86 FPU code: once all drivers
are decoupled from internals we can move them out of common
headers and we'll also be able to remove xcr.h.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
xfeature checks
Use the new 'cpu_has_xfeatures()' function to query AVX CPU support.
This has the following advantages to the driver:
- Decouples the driver from FPU internals: it's now only using <asm/fpu/api.h>.
- Removes detection complexity from the driver, no more raw XGETBV instruction
- Shrinks the code a bit.
- Standardizes feature name error message printouts across drivers
There are also advantages to the x86 FPU code: once all drivers
are decoupled from internals we can move them out of common
headers and we'll also be able to remove xcr.h.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
