summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-07net: refine {udp|tcp|sctp}_mem limitsEric Dumazet
Current tcp/udp/sctp global memory limits are not taking into account hugepages allocations, and allow 50% of ram to be used by buffers of a single protocol [ not counting space used by sockets / inodes ...] Lets use nr_free_buffer_pages() and allow a default of 1/8 of kernel ram per protocol, and a minimum of 128 pages. Heavy duty machines sysadmins probably need to tweak limits anyway. References: https://bugzilla.stlinux.com/show_bug.cgi?id=38032 Reported-by: starlight <starlight@binnacle.cx> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07vmxnet3: round down # of queues to power of twoShreyas Bhatewara
vmxnet3 device supports only power-of-two number of queues. The driver therefore needs to check this and rounds down the number of queues to the nearest power of two. Signed-off-by: Yong Wang <yongwang@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
2011-07-06net: sh_eth: fix the parameter for the ETHER of SH7757Yoshihiro Shimoda
If the driver didn't set this parameter on the ETHER, the CPU will encounter the "data address error" exception. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06net: sh_eth: fix cannot work half-duplex modeYoshihiro Shimoda
When link was down, the bit of DM in ECMR was always set. So, we could not use half-duplex mode on the controller. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06net: vlan: enable soft features regardless of underlying deviceShan Wei
If gso/gro feature of underlying device is turned off， then new created vlan device never can turn gso/gro on. Although underlying device don't support TSO, we still should use software segments for vlan device. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06vmxnet3: fix starving rx ring whenoc_skb kb failsShreyas Bhatewara
If the rx ring is completely empty, then the device may never fire an rx interrupt. Unfortunately, the rx interrupt is what triggers populating the rx ring with fresh buffers, so this will cause networking to lock up. This patch replenishes the skb in recv descriptor as soon as it is peeled off while processing rx completions. If the skb/buffer allocation fails, existing one is recycled and the packet in hand is dropped. This way none of the RX desc is ever left empty, thus avoiding starvation Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06bridge: Always flood broadcast packetsHerbert Xu
As is_multicast_ether_addr returns true on broadcast packets as well, we need to explicitly exclude broadcast packets so that they're always flooded. This wasn't an issue before as broadcast packets were considered to be an unregistered multicast group, which were always flooded. However, as we now only flood such packets to router ports, this is no longer acceptable. Reported-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05greth: greth_set_mac_add would corrupt the MAC address.Kristoffer Glembo
The MAC address was set using the signed char sockaddr->sa_addr field and thus the address could be corrupted through sign extension. Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05net: bind() fix error return on wrong address familyMarcus Meissner
Hi, Reinhard Max also pointed out that the error should EAFNOSUPPORT according to POSIX. The Linux manpages have it as EINVAL, some other OSes (Minix, HPUX, perhaps BSD) use EAFNOSUPPORT. Windows uses WSAEFAULT according to MSDN. Other protocols error values in their af bind() methods in current mainline git as far as a brief look shows: EAFNOSUPPORT: atm, appletalk, l2tp, llc, phonet, rxrpc EINVAL: ax25, bluetooth, decnet, econet, ieee802154, iucv, netlink, netrom, packet, rds, rose, unix, x25, No check?: can/raw, ipv6/raw, irda, l2tp/l2tp_ip Ciao, Marcus Signed-off-by: Marcus Meissner <meissner@suse.de> Cc: Reinhard Max <max@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04natsemi: silence dma-debug warningsFUJITA Tomonori
This silences dma-debug warnings: https://lkml.org/lkml/2011/6/30/341 ------------[ cut here ]------------ WARNING: at /home/jimc/projects/lx/linux-2.6/lib/dma-debug.c:820 check_unmap+0x1fe/0x56a() natsemi 0000:00:06.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000006ef0040] [map size=1538 bytes] [unmap size=1522 bytes] Modules linked in: pc8736x_gpio pc87360 hwmon_vid scx200_gpio nsc_gpio scx200_hrt scx200_acb i2c_core arc4 rtl8180 mac80211 eeprom_93cx6 cfg80211 pcspkr rfkill scx200 ide_gd_mod ide_pci_generic ohci_hcd usbcore sc1200 ide_core Pid: 870, comm: collector Not tainted 3.0.0-rc5-sk-00080-gca56a95 #1 Call Trace: [<c011a556>] warn_slowpath_common+0x4a/0x5f [<c02565cb>] ? check_unmap+0x1fe/0x56a [<c011a5cf>] warn_slowpath_fmt+0x26/0x2a [<c02565cb>] check_unmap+0x1fe/0x56a [<c0256aaa>] debug_dma_unmap_page+0x53/0x5b [<c029d6cd>] pci_unmap_single+0x4d/0x57 [<c029ea0a>] natsemi_poll+0x343/0x5ca [<c0116f41>] ? try_to_wake_up+0xea/0xfc [<c0122416>] ? spin_unlock_irq.clone.28+0x18/0x23 [<c02d4667>] net_rx_action+0x3f/0xe5 [<c011e35e>] __do_softirq+0x5b/0xd1 [<c011e303>] ? local_bh_enable+0xa/0xa <IRQ> [<c011e54b>] ? irq_exit+0x34/0x75 [<c01034b9>] ? do_IRQ+0x66/0x79 [<c034e869>] ? common_interrupt+0x29/0x30 [<c0115ed0>] ? finish_task_switch.clone.118+0x31/0x72 [<c034cb92>] ? schedule+0x3b2/0x3f1 [<c012f4b0>] ? hrtimer_start_range_ns+0x10/0x12 [<c012f4ce>] ? hrtimer_start_expires+0x1c/0x24 [<c034d5aa>] ? schedule_hrtimeout_range_clock+0x8e/0xb4 [<c012ed27>] ? update_rmtp+0x68/0x68 [<c034d5da>] ? schedule_hrtimeout_range+0xa/0xc [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c017b051>] ? do_select+0x488/0x4cd [<c0115ee2>] ? finish_task_switch.clone.118+0x43/0x72 [<c01157ad>] ? need_resched+0x14/0x1e [<c017a99e>] ? poll_freewait+0x74/0x74 [<c01157ad>] ? need_resched+0x14/0x1e [<c034cbc1>] ? schedule+0x3e1/0x3f1 [<c011e55e>] ? irq_exit+0x47/0x75 [<c01157ad>] ? need_resched+0x14/0x1e [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a [<c034dd1e>] ? need_resched+0x17/0x19 [<c024bc12>] ? put_dec_full+0x7b/0xaa [<c0240060>] ? blkdev_ioctl+0x434/0x618 [<c024bc70>] ? put_dec+0x2f/0x6d [<c024c6a5>] ? number.clone.1+0x10b/0x1d0 [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a [<c034dd1e>] ? need_resched+0x17/0x19 [<c024d046>] ? vsnprintf+0x225/0x264 [<c024cea0>] ? vsnprintf+0x7f/0x264 [<c018346f>] ? seq_printf+0x22/0x40 [<c01a2fcc>] ? do_task_stat+0x582/0x5a3 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c017b1b5>] ? core_sys_select+0x11f/0x1a3 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e [<c01a34a1>] ? proc_tgid_stat+0xd/0xf [<c012357c>] ? recalc_sigpending+0x32/0x35 [<c0123b9c>] ? __set_task_blocked+0x64/0x6a [<c011dfb0>] ? timespec_add_safe+0x24/0x48 [<c0123449>] ? spin_unlock_irq.clone.16+0x18/0x23 [<c017b3a1>] ? sys_pselect6+0xe5/0x13e [<c034dd65>] ? syscall_call+0x7/0xb [<c0340000>] ? rpc_clntdir_depopulate+0x26/0x30 ---[ end trace 180dcac41a50938b ]--- Reported-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: 8139too: Initial necessary vlan_features to support vlanShan Wei
Offload setting of vlan device requires vlan_features to be initialized. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02Fix call trace when interrupts are disabled while sleeping function kzalloc ↵Shyam Iyer
is called request_threaded irq will call kzalloc that can sleep. Initializing the flags variable outside of spin_lock_irqsave/restore in bnad_mbox_irq_alloc will avoid call traces like below. Jun 27 08:15:24 home-t710 kernel: [11735.634550] Brocade 10G Ethernet driver Jun 27 08:15:24 home-t710 kernel: [11735.634590] bnad_pci_probe : (0xffff880427f3d000, 0xffffffffa020f3e0) PCI Func : (2) Jun 27 08:15:24 home-t710 kernel: [11735.637677] bna 0000:82:00.2: PCI INT A -> GSI 66 (level, low) -> IRQ 66 Jun 27 08:15:24 home-t710 kernel: [11735.638290] bar0 mapped to ffffc90014980000, len 262144 Jun 27 08:15:24 home-t710 kernel: [11735.638732] BUG: sleeping function called from invalid context at mm/slub.c:847 Jun 27 08:15:24 home-t710 kernel: [11735.638736] in_atomic(): 0, irqs_disabled(): 1, pid: 11243, name: insmod Jun 27 08:15:24 home-t710 kernel: [11735.638740] Pid: 11243, comm: insmod Not tainted 3.0.0-rc4+ #6 Jun 27 08:15:24 home-t710 kernel: [11735.638743] Call Trace: Jun 27 08:15:24 home-t710 kernel: [11735.638755] [<ffffffff81046427>] __might_sleep+0xeb/0xf0 Jun 27 08:15:24 home-t710 kernel: [11735.638766] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638773] [<ffffffff8111201c>] kmem_cache_alloc_trace+0x43/0xd8 Jun 27 08:15:24 home-t710 kernel: [11735.638782] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638787] [<ffffffff810ab791>] request_threaded_irq+0xa1/0x113 Jun 27 08:15:24 home-t710 kernel: [11735.638798] [<ffffffffa020f0c0>] bnad_pci_probe+0x612/0x8e5 [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638807] [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638816] [<ffffffff81482ef4>] ? _raw_spin_unlock_irqrestore+0x17/0x19 Jun 27 08:15:24 home-t710 kernel: [11735.638822] [<ffffffff8124d17a>] local_pci_probe+0x44/0x75 Jun 27 08:15:24 home-t710 kernel: [11735.638826] [<ffffffff8124dc06>] pci_device_probe+0xd0/0xff Jun 27 08:15:24 home-t710 kernel: [11735.638832] [<ffffffff812ef8ab>] driver_probe_device+0x131/0x213 Jun 27 08:15:24 home-t710 kernel: [11735.638836] [<ffffffff812ef9e7>] __driver_attach+0x5a/0x7e Jun 27 08:15:24 home-t710 kernel: [11735.638840] [<ffffffff812ef98d>] ? driver_probe_device+0x213/0x213 Jun 27 08:15:24 home-t710 kernel: [11735.638844] [<ffffffff812ee933>] bus_for_each_dev+0x53/0x89 Jun 27 08:15:24 home-t710 kernel: [11735.638848] [<ffffffff812ef48a>] driver_attach+0x1e/0x20 Jun 27 08:15:24 home-t710 kernel: [11735.638852] [<ffffffff812ef0ae>] bus_add_driver+0xd1/0x224 Jun 27 08:15:24 home-t710 kernel: [11735.638858] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638862] [<ffffffff812efe57>] driver_register+0x98/0x105 Jun 27 08:15:24 home-t710 kernel: [11735.638866] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638871] [<ffffffff8124e4c9>] __pci_register_driver+0x56/0xc1 Jun 27 08:15:24 home-t710 kernel: [11735.638875] [<ffffffffa01b8000>] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638884] [<ffffffffa01b8040>] bnad_module_init+0x40/0x60 [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638892] [<ffffffff81002099>] do_one_initcall+0x7f/0x136 Jun 27 08:15:24 home-t710 kernel: [11735.638899] [<ffffffff8108608b>] sys_init_module+0x88/0x1d0 Jun 27 08:15:24 home-t710 kernel: [11735.638906] [<ffffffff81489682>] system_call_fastpath+0x16/0x1b Jun 27 08:15:24 home-t710 kernel: [11735.639642] bnad_pci_probe : (0xffff880427f3e000, 0xffffffffa020f3e0) PCI Func : (3) Jun 27 08:15:24 home-t710 kernel: [11735.639665] bna 0000:82:00.3: PCI INT A -> GSI 66 (level, low) -> IRQ 66 Jun 27 08:15:24 home-t710 kernel: [11735.639735] bar0 mapped to ffffc90014400000, len 262144 Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Acked-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02qlge:Version change to v1.00.00.29Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02qlge: Fix printk priority so chip fatal errors are always reported.Jitendra Kalsaria
Precedence of the printk should be at higher level so chip fatal errors are always reported. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02qlge:Fix crash caused by mailbox execution on wedged chip.Jitendra Kalsaria
When we are in a recover process from a chip fatal error, driver should skip over execution of mailbox commands during resetting chip. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02xfrm4: Don't call icmp_send on local errorSteffen Klassert
Calling icmp_send() on a local message size error leads to an incorrect update of the path mtu. So use ip_local_error() instead to notify the socket about the error. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02ipv4: Don't use ufo handling on later transformed packetsSteffen Klassert
We might call ip_ufo_append_data() for packets that will be IPsec transformed later. This function should be used just for real udp packets. So we check for rt->dst.header_len which is only nonzero on IPsec handling and call ip_ufo_append_data() just if rt->dst.header_len is zero. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02xfrm: Remove family arg from xfrm_bundle_okSteffen Klassert
The family arg is not used any more, so remove it. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02ipv6: Don't put artificial limit on routing table size.David S. Miller
IPV6, unlike IPV4, doesn't have a routing cache. Routing table entries, as well as clones made in response to route lookup requests, all live in the same table. And all of these things are together collected in the destination cache table for ipv6. This means that routing table entries count against the garbage collection limits, even though such entries cannot ever be reclaimed and are added explicitly by the administrator (rather than being created in response to lookups). Therefore it makes no sense to count ipv6 routing table entries against the GC limits. Add a DST_NOCOUNT destination cache entry flag, and skip the counting if it is set. Use this flag bit in ipv6 when adding routing table entries. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-02ipv6: Don't change dst->flags using assignments.David S. Miller
This blows away any flags already set in the entry. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-026pack,mkiss: fix lock inconsistencyArnd Bergmann
Lockdep found a locking inconsistency in the mkiss_close function: > kernel: [ INFO: inconsistent lock state ] > kernel: 2.6.39.1 #3 > kernel: --------------------------------- > kernel: inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. > kernel: ax25ipd/2813 [HC0[0]:SC0[0]:HE1:SE1] takes: > kernel: (disc_data_lock){+++?.-}, at: [<ffffffffa018552b>] mkiss_close+0x1b/0x90 [mkiss] > kernel: {IN-SOFTIRQ-R} state was registered at: The message hints that disc_data_lock is aquired with softirqs disabled, but does not itself disable softirqs, which can in rare circumstances lead to a deadlock. The same problem is present in the 6pack driver, this patch fixes both by using write_lock_bh instead of write_lock. Reported-by: Bernard F6BVP <f6bvp@free.fr> Tested-by: Bernard F6BVP <f6bvp@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ralf Baechle<ralf@linux-mips.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits) usbnet: Remove over-broad module alias from zaurus. MAINTAINERS: drop Michael from bfin_mac driver net/can: activate bit-timing calculation and netlink based drivers by default rionet: fix NULL pointer dereference in rionet_remove net+crypto: Use vmalloc for zlib inflate buffers. netfilter: Fix ip_route_me_harder triggering ip_rt_bug ipv4: Fix IPsec slowpath fragmentation problem ipv4: Fix packet size calculation in __ip_append_data cxgb3: skb_record_rx_queue now records the queue index relative to the net_device. bridge: Only flood unregistered groups to routers qlge: Add maintainer. MAINTAINERS: mark socketcan-core lists as subscribers-only MAINTAINERS: Remove Sven Eckelmann from BATMAN ADVANCED r8169: fix wrong register use. net/usb/kalmia: signedness bug in kalmia_bind() net/usb: kalmia: Various fixes for better support of non-x86 architectures. rtl8192cu: Fix missing firmware load udp/recvmsg: Clear MSG_TRUNC flag when starting over for a new packet ipv6/udp: Use the correct variable to determine non-blocking condition netconsole: fix build when CONFIG_NETCONSOLE_DYNAMIC is turned on ...
2011-06-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6: MAINTAINERS: update AVR32 and AT32AP maintainers
2011-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: update author email for at32ap700x_wdt watchdog: gef_wdt: fix MODULE_ALIAS watchdog: Intel SCU Watchdog: Fix build and remove duplicate code watchdog: mtx1-wdt: fix section mismatch watchdog: mtx1-wdt: fix GPIO toggling watchdog: mtx1-wdt: request gpio before using it watchdog: Handle multiple wm831x watchdogs being registered
2011-06-30Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: sh: use printk_ratelimited instead of printk_ratelimit sh: Fix up unmet dependency warnings with USB EHCI/OHCI selects. sh: fix the value of sh_dmae_slave_config in setup-sh7757 sh: fix the INTC vector for IRQ and IRL in setup-sh7757 sh: add to select the new configuration for USB EHCI/OHCI sh: add platform_device of EHCI/OHCI to setup-sh7757 sh: fix compile error using sh7757lcr_defconfig
2011-06-30Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: ARM: mach-shmobile: make a struct in board-ap4evb.c static ARM: mach-shmobile: ag5evm: consistently name sdhi info structures ARM: mach-shmobile: mackerel: change usbhs devices order
2011-06-30Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
2011-06-30MAINTAINERS: update AVR32 and AT32AP maintainersHans-Christian Egtvedt
This alters the maintenance of the AVR32 architecture and the AT32AP machine code to be shared between Haavard Skinnemoen and me. The status is also changed to maintained, as we no longer are being paid to look after this architecture. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Haavard Skinnemoen <hskinnemoen@gmail.com>
2011-06-30sh: use printk_ratelimited instead of printk_ratelimitPaul Mundt
Follows the powerpc change, for much the same rationale. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-30sh: Fix up unmet dependency warnings with USB EHCI/OHCI selects.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-30ARM: mach-shmobile: make a struct in board-ap4evb.c staticGuennadi Liakhovetski
struct soc_camera_link imx074_link in board-ap4evb.c doesn't have to be global. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-30Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: increase rom size for atrm method
2011-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix operator precedence in shared descriptor allocation
2011-06-30drm/radeon/kms: increase rom size for atrm methodAlex Deucher
The vbios rom is >64k on a lot of modern asics. Increase the fetch size for atrm to make sure we don't miss part of a larger rom. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-29crypto: caam - fix operator precedence in shared descriptor allocationKim Phillips
setkey allocates 16 bytes (CAAM_CMD_SZ * DESC_AEAD_SHARED_TEXT_LEN) shy of what is needed to store the shared descriptor, resulting in memory corruption. Fix this. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-29ath5k: fix memory leak when fewer than N_PD_CURVES are in useEugene A. Shatokhin
We would free the proper number of curves, but in the wrong slots, due to a missing level of indirection through the pdgain_idx table. It's simpler just to try to free all four slots, so do that. Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29ath9k: Fix suspend/resume when no interface is UPRajkumar Manoharan
When no interface has been brought up, the chip's power state continued as AWAKE. So during resume, the chip never been powered up. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29Merge branch 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86 emulator: fix %rip-relative addressing with immediate source operand
2011-06-29Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c/pca954x: Initialize the mux to disconnected state i2c-taos-evm: Fix log messages
2011-06-29Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: arch/powerpc: use printk_ratelimited instead of printk_ratelimit powerpc/rtas-rtc: remove sideeffects of printk_ratelimit powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfig powerpc/e500: fix breakage with fsl_rio_mcheck_exception powerpc/p1022ds: fix audio-related properties in the device tree powerpc/85xx: fix NAND_CMD_READID read bytes number
2011-06-29ahci: change 'masking port_map' printk to KERN_WARNING levelLinus Torvalds
It's not so much an error as a warning about normal Marvell crazines. So don't use KERN_ERR that ends up spamming the console even in quiet mode, it's not _that_ critical. Explained by Jeff: "Long explanation, it's a mess: Marvell took standard AHCI, and bastardized it to include a weird mode whereby PATA devices appear inside the AHCI DMA and interrupt infrastructure you're familiar with. So, PATA devices appear via pata_marvell driver, using basic legacy IDE programming interface. But SATA devices, which might also be attached to this chip, either work in under-performing mode or simply don't work at all (e.g. newer 6 Gbps devices or port multiplier attachments, NCQ, ...) On the other hand, 'ahci' driver loads and works with the chip's attached SATA devices quite beautifully, but is completely unable to drive any attached PATA devices, due to the Marvell-specific PATA-under-AHCI interface. The "masking port_map 0x7 -> 0x3" message is the ahci driver "hiding" the PATA port(s) from itself, making sure it will only drive the SATA ports it knows how to drive." Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-29usbnet: Remove over-broad module alias from zaurus.Dave Jones
This module and a bunch of dependancies are getting loaded on several of laptops I have (probably picking up the mobile broadband device), that have nothing to do with zaurus. Matching by class without any vendor/device pair isn't the right thing to do here, as it will prevent any other driver from correctly binding to it. (Or in the absense of a driver, will just waste time & memory by unnecessarily loading modules) Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29MAINTAINERS: drop Michael from bfin_mac driverMike Frysinger
We want people to just use the list now rather than hitting up people who are no longer responsible for it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29net/can: activate bit-timing calculation and netlink based drivers by defaultMarc Kleine-Budde
The two options "CAN bit-timing calculation" and "Platform CAN drivers with Netlink support" have a "default Y". In order to activate them by default, change to "default y". Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29rionet: fix NULL pointer dereference in rionet_removeYinglin Luan
Function rionet_remove initializes local variable 'ndev' to NULL and do nothing changes before the call to unregister_netdev(ndev), this could cause a NULL pointer dereference. Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Yinglin Luan <synmyth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29net+crypto: Use vmalloc for zlib inflate buffers.David S. Miller
They are 64K and result in order-4 allocations, even with SLUB. Therefore, just like we always have for the deflate buffers, use vmalloc. Reported-by: Martin Jackson <mjackson220.list@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29netfilter: Fix ip_route_me_harder triggering ip_rt_bugJulian Anastasov
Avoid creating input routes with ip_route_me_harder. It does not work for locally generated packets. Instead, restrict sockets to provide valid saddr for output route (or unicast saddr for transparent proxy). For other traffic allow saddr to be unicast or local but if callers forget to check saddr type use 0 for the output route. The resulting handling should be: - REJECT TCP: - in INPUT we can provide addr_type = RTN_LOCAL but better allow rejecting traffic delivered with local route (no IP address => use RTN_UNSPEC to allow also RTN_UNICAST). - FORWARD: RTN_UNSPEC => allow RTN_LOCAL/RTN_UNICAST saddr, add fix to ignore RTN_BROADCAST and RTN_MULTICAST - OUTPUT: RTN_UNSPEC - NAT, mangle, ip_queue, nf_ip_reroute: RTN_UNSPEC in LOCAL_OUT - IPVS: - use RTN_LOCAL in LOCAL_OUT and FORWARD after SNAT to restrict saddr to be local Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29i2c/pca954x: Initialize the mux to disconnected statePetri Gynther
pca954x power-on default is channel 0 connected. If multiple pca954x muxes are connected to the same physical I2C bus, the parent bus will see channel 0 devices behind both muxes by default. This is bad. Scenario: -- pca954x @ 0x70 -- ch 0 (I2C-bus-101) -- EEPROM @ 0x50 | I2C-bus-1 --- | -- pca954x @ 0x71 -- ch 0 (I2C-bus-111) -- EEPROM @ 0x50 1. Load I2C bus driver: creates I2C-bus-1 2. Load pca954x driver: creates virtual I2C-bus-101 and I2C-bus-111 3. Load eeprom driver 4. Try to read EEPROM @ 0x50 on I2C-bus-101. The transaction will also bleed onto I2C-bus-111 because pca954x @ 0x71 channel 0 is connected by default. Fix: Initialize pca954x to disconnected state in pca954x_probe() Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-06-29i2c-taos-evm: Fix log messagesJean Delvare
* Print all error and information messages even when debugging is disabled. * Don't use adapter device to log messages before it is ready. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
generated by cgit v0.10.2 at 2024-09-19 05:01:40 (GMT)