summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-28Input: xpad - power off wireless 360 controllers on suspendCameron Gutman
When the USB wireless adapter is suspended, the controllers lose their connection. This causes them to start flashing their LED rings and searching for the wireless adapter again, wasting the controller's battery power. Instead, we will tell the controllers to power down when we suspend. This mirrors the behavior of the controllers when connected to the console itself and how the official Xbox One wireless adapter behaves on Windows. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-27Input: i8042 - break load dependency between atkbd/psmouse and i8042Dmitry Torokhov
As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we have a hard load dependency between i8042 and atkbd which prevents keyboard from working on Gen2 Hyper-V VMs. > hyperv_keyboard invokes serio_interrupt(), which needs a valid serio > driver like atkbd.c. atkbd.c depends on libps2.c because it invokes > ps2_command(). libps2.c depends on i8042.c because it invokes > i8042_check_port_owner(). As a result, hyperv_keyboard actually > depends on i8042.c. > > For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a > Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m > rather than =y, atkbd.ko can't load because i8042.ko can't load(due to > no i8042 device emulated) and finally hyperv_keyboard can't work and > the user can't input: https://bugs.archlinux.org/task/39820 > (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y) To break the dependency we move away from using i8042_check_port_owner() and instead allow serio port owner specify a mutex that clients should use to serialize PS/2 command stream. Reported-by: Mark Laws <mdl@60hz.org> Tested-by: Mark Laws <mdl@60hz.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-26Input: synaptics-rmi4 - do not check for NULL when calling of_node_put()Markus Elfring
The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-26Input: cros_ec_keyb - cleanup use of devDouglas Anderson
In cros_ec_keyb we stored "dev" in "struct cros_ec_keyb", but this was the EC's dev pointer and not the keyboard's. Let's clean this up to make it the keyboard's dev pointer. This could be useful in future patches but also has the nice effect of changing a few printouts to include the name of the keyboard device instead of the EC device, so we will see: [ 1.224648] cros-ec-keyb ff110000.spi:ec@0:keyboard-controller: valid_keys[00] = 0x14 instead of: [ 1.224505] cros-ec-spi spi0.0: valid_keys[00] = 0x14 Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-21Input: tty/vt/keyboard - use memdup_user()Muhammad Falak R Wani
Use memdup_user to duplicate a memory region from user-space to kernel-space, instead of open coding using kmalloc & copy_from_user. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19Input: pegasus_notetaker - set device mode in reset_resume() if in useMartin Kepplinger
Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19Input: pegasus_notetaker - cancel workqueue's work in suspend()Martin Kepplinger
Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19Input: pegasus_notetaker - fix usb_autopm calls to be balancedMartin Kepplinger
We should only "put" the interface if submitting URB or setting tablet mode in pegasus_open() fails, otherwise leave it to pegasus_close(). Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19Input: pegasus_notetaker - handle usb control msg errorsMartin Kepplinger
Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19Input: wacom_w8001 - handle errors from input_mt_init_slots()Ping Cheng
input_mt_init_slots() may fail and we should be handling failures properly. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19Input: wacom_w8001 - resolution wasn't set for ABS_MT_POSITION_X/YPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19Merge branch 'for-linus' into nextDmitry Torokhov
Sync up to bring in wacom_w8001 changes to avoid merge conflicts later.
2016-07-15Input: pixcir_ts - add support for axis inversion / swappingHans de Goede
Add support for axis inversion / swapping using the new touchscreen_parse_properties() and touchscreen_set_mt_pos() functionality. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-15Input: icn8318 - use of_touchscreen helpers for inverting / swapping axesHans de Goede
Use the touchscreen_parse_properties() and touchscreen_report_pos() to perform coordinates transformation, instead of DIY code, which results in a nice cleanup. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-15Input: edt-ft5x06 - add support for inverting / swapping axesHans de Goede
Add support for inverting / swapping axes using the new touchscreen_parse_properties() and touchscreen_report_pos() functionality. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-15Input: of_touchscreen - add support for inverted / swapped axesHans de Goede
Extend touchscreen_parse_properties() with support for the touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and add touchscreen_set_mt_pos() and touchscreen_report_pos() helper functions for storing coordinates into a input_mt_pos struct, or directly reporting them, taking these properties into account. This commit also modifies the existing callers of touchscreen_parse_properties() to pass in NULL for the new third argument, keeping the existing behavior. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-15Input: ts4800-ts - add missing of_node_put after calling of_parse_phandlePeter Chen
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in ↵Andrew Duggan
rmi_f11_rel_pos_report The size of relative data in F11 is already defined by RMI_F11_REL_BYTES. Use the define in rmi_f11_rel_pos_report() to be consistent. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - remove unneeded variableAndrew Duggan
Remove the data_base_addr_offset variable in rmi_f11_attention(). The f11 data is read as a single block so there is no need to store an offset to the data address. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - remove pointer to rmi_function in f12_dataAndrew Duggan
The pointer to struct rmi_function in f12_data is never set and was never used. The fn pointer is also stored in rmi_2d_sensor which is a member of f12_data. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - use of_get_child_by_name() to fix refcountAndrew Duggan
Calling of_find_node_by_name() assumes that the caller has incremented the refcount of the of_node being passed in. Currently, the caller is not incrementing the refcount of the of_node which results in the node being prematurely freed when of_find_node_by_name() calls of_node_put() on it. Instead use of_get_child_by_name() which does not call put on the of_node. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Revert "Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE"Dmitry Torokhov
This reverts commit 5f7e5445a2de848c66d2d80ba5479197e8287c33 because removal of input_mt_report_slot_state() means we no longer generate tracking IDs for the reported contacts. Cc: stable@vger.kernel.org Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Ping Cheng <pinglinux@gmail.com>
2016-07-14Input: synaptics-rmi4 - support regulator suppliesBjorn Andersson
Support the two supplies - vdd and vio - to make it possible to control power to the Synaptics chip. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: raydium_i2c_ts - check CRC of incoming packetsJeffrey Lin
Check CRC of incoming touch packets to ensure that we do not operate on corrupted data. Signed-off-by: Jeffrey Lin <jeffrey.lin@rad-ic.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: xen-kbdfront - prefer xenbus_write() over xenbus_printf() where possibleJan Beulich
... as being the simpler variant. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: fix a double word "is is" in include/linux/input.hMasanari Iida
This patch fix a double word "is is" found in in Documentation/DocBook/device-drivers.xml. It is because the file was created from comments in sources, so I have to fix the double words in include/linux/input.h Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-29Input: xpad - validate USB endpoint count during probeCameron Gutman
This prevents a malicious USB device from causing an oops. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-29Input: add SW_PEN_INSERTED defineDouglas Anderson
Some devices with a pen may have a switch that can be used to detect when the pen is inserted or removed to a slot on the device. Let's add a define to the input event codes so that everyone can be on the same page for what event we should generate when the pen is inserted or removed. In general the pen switch could be used by the software on the device to kick off any number of actions when the pen is inserted or removed. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-24Input: vmmouse - remove port reservationSinclair Yeh
The VMWare EFI BIOS will expose port 0x5658 as an ACPI resource. This causes the port to be reserved by the APCI module as the system comes up, making it unavailable to be reserved again by other drivers, thus preserving this VMWare port for special use in a VMWare guest. This port is designed to be shared among multiple VMWare services, such as the VMMOUSE. Because of this, VMMOUSE should not try to reserve this port on its own. The VMWare non-EFI BIOS does not do this to preserve compatibility with existing/legacy VMs. It is known that there is small chance a VM may be configured such that these ports get reserved by other non-VMWare devices, and if this ever happens, the result is undefined. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: <stable@vger.kernel.org> # 4.1- Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: add powerkey driver for HISI 65xx SoCJorge Ramirez-Ortiz
This driver provides a input driver for the power button on the HiSi 65xx SoC for boards like HiKey. This driver was originally by Zhiliang Xue <xuezhiliang@huawei.com> then basically rewritten by Jorge, but preserving the original module author credits. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> [jstultz: Reworked commit message, folded in other fixes/cleanups from Jorge, implemented some larger cleanups suggested by DmitryT] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: elantech - add more IC body types to the listDmitry Torokhov
The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and according to Elan both 11 and 12 are valid IC types and should be identified as hw_version 4. Reported-by: Patrick Lessard <Patrick.Lessard@cogeco.com> Tested-by: Patrick Lessard <Patrick.Lessard@cogeco.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: wacom_w8001 - ignore invalid pen data packetsPing Cheng
ThinkPad X60 Tablet PC (pen only device) sometime posts packets that are larger than W8001_PKTLEN_TPCPEN. Reported-by: Chris J Arges <christopherarges@gmail.com> Tested-by: Chris J Arges <christopherarges@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: wacom_w8001 - w8001_MAX_LENGTH should be 13Ping Cheng
Somehow the patch that added two-finger touch support forgot to update W8001_MAX_LENGTH from 11 to 13. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: apanel - spelling mistake - "skiping" -> "skipping"Colin Ian King
trivial fix to spelling mistake in pr_notice message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: ams_delta_serio - fix spelling mistake: "paritiy" -> "parity"Colin Ian King
trivial fix to spelling mistake in dev_warn message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: tegra-kbc - fix spelling mistake: "porperly" -> "properly"Colin Ian King
trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: regulator-haptic - fix spelling mistake: "dveice" -> "device"Colin Ian King
Trivial fix to spelling mistake Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-23Input: xpad - fix oops when attaching an unknown Xbox One gamepadCameron Gutman
Xbox One controllers have multiple interfaces which all have the same class, subclass, and protocol. One of the these interfaces has only a single endpoint. When Xpad attempts to bind to this interface, it causes an oops when trying initialize the output URB by trying to access the second endpoint's descriptor. This situation was avoided for known Xbox One devices by checking the XTYPE constant associated with the VID and PID tuple. However, this breaks when new or previously unknown Xbox One controllers are attached to the system. This change addresses the problem by deriving the XTYPE for Xbox One controllers based on the interface protocol before checking the interface number. Fixes: 1a48ff81b391 ("Input: xpad - add support for Xbox One controllers") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-19MAINTAINERS: add Pali Rohár as reviewer of ALPS PS/2 touchpad driverPali Rohár
Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-19Input: psmouse - use same format for secondary devices as for primaryPali Rohár
This patch changes name of secondary psmouse devices to mach format of primary device. Format of primary device is "protocol vendor name" and is set by function psmouse_switch_protocol() in file psmouse-base.c. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-19Merge branch 'cec-defines' into for-linusDmitry Torokhov
Let's bring in HDMI CEC defines to ease merging CEC support in the next merge window.
2016-06-18Input: add HDMI CEC specific keycodesKamil Debski
Add HDMI CEC specific keycodes to the keycodes definition. Signed-off-by: Kamil Debski <kamil@wypas.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-18Input: add BUS_CEC typeHans Verkuil
Inputs can come in over the HDMI CEC bus, so add a new type for this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-02Input: add Pegasus Notetaker tablet driverMartin Kepplinger
This adds a driver for the Pegasus Notetaker Pen. When connected, this uses the Pen as an input tablet. This device was sold in various different brandings, for example "Pegasus Mobile Notetaker M210", "Genie e-note The Notetaker", "Staedtler Digital ballpoint pen 990 01", "IRISnotes Express" or "NEWLink Digital Note Taker". Here's an example, so that you know what we are talking about: http://www.genie-online.de/genie-e-note-2/ https://pegatech.blogspot.com/ seems to be a remaining official resource. This device can also transfer saved (offline recorded handwritten) data and there are userspace programs that do this, see https://launchpad.net/m210 (Well, alternatively there are really fast scanners out there :) It's *really* fun to use as an input tablet though! So let's support this for everybody. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-01Input: xpad - fix rumble on Xbox One controllers with 2015 firmwareCameron Gutman
Xbox One controllers that shipped with or were upgraded to the 2015 firmware discard the current rumble packets we send. This patch changes the Xbox One rumble packet to a form that both the newer and older firmware will accept. It is based on changes made to support newer Xbox One controllers in the SteamOS brewmaster-4.1 kernel branch. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-01Input: ti_am335x_tsc - use variable name for sizeof() operatorAndrew F. Davis
Fix the code formatting to use the kernel preferred style of using the actual variables to determize the size using the sizeof() operator. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-01Input: update input_mt_report_pointer_emulation to support hoveringKT Liao
For devices that are incapable of reporting per-contact distance and can only report ABS_DISTANCE, just distance is not enough for upper layers of OS to determine whether contact is leaving the area or if it is continuing hovering, we need BTN_TOOL_FINGER for that: Contact State Inactive Hovering Active (far away) (inside hover area) (touching surface) BTN_TOUCH 0 0 1 BTN_TOOL_FINGER 0 1 1 ABS_DISTANCE N/A 1 0 Signed-off-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-01Input: raydium_i2c_ts - do not ignore EPROBE_DEFER from gpiod_get_optionalDmitry Torokhov
We should not be ignoring -EPROBE_DEFER reported by devm_gpiod_get_optional(), but report it as any other error to the upper layers. While we are at it simplify check for the presence of reset GPIO and instead of using IS_ERR_OR_NULL just use boolean. Also do not return -ENOMEM from suspend handler when the device in bootloader mode as that does not make sense and switch to -EBUSY instead. Reported-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-28Input: add Raydium I2C touchscreen driverJeffrey Lin
This adds support for Raydium I2C touch controllers compatible with RM32380. Signed-off-by: Jeffrey Lin <jeffrey.lin@rad-ic.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-27Input: pwm-beeper - fix - scheduling while atomicManfred Schlaegl
Pwm config may sleep so defer it using a worker. On a Freescale i.MX53 based board we ran into "BUG: scheduling while atomic" because input_inject_event locks interrupts, but imx_pwm_config_v2 sleeps. Tested on Freescale i.MX53 SoC with 4.6.0. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v0.10.2 at 2024-09-06 08:46:26 (GMT)