summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-09-23cassini: use request_firmwareJaswinder Singh
Firmware blob looks like this... __le16 load_address unsigned char data[] [akpm@linux-foundation.org: include vmalloc.h] Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23net/atm/lec.c: drop code after returnJulia Lawall
The break after the return serves no purpose. Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23drivers/net/wan: Use DIV_ROUND_UPJulia Lawall
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23drivers/atm: Use DIV_ROUND_UPJulia Lawall
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. In the case of the file drivers/atm/eni.c, I am a little bit suspicious of the -1 at the end of the affected expression. Please check that that is what is wanted. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23hci_usb: replace mb with smp_mbMing Lei
smp_mb is enough for ordering memory operations among processors,and mb is more expensive than smp_mb for UP machine, so replace it with smp_mb(). Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23net: em_cmp.c use unaligned access helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23irda: follow lspci device/vendor styleBjorn Helgaas
Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23mISDN: misc timerdev fixesAndi Kleen
- Remove noop VFS stubs. The VFS does that on a NULL pointer anyways. - Fix timer handler prototype to be correct - Comment ugly SMP race I didn't fix. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23mISDN: annotate iomem pointer and add staticsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23mISDN: endian annotations for struct ztHarvey Harrison
Found two possible bugs where the z1 value was used directly without byteswapping. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23drivers/isdn/capi/kcapi.c: Adjust error handling code involving capi_ctr_putJulia Lawall
After calling capi_ctr_get, error handling code should call capi_ctr_put. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r@ expression x,E; statement S; position p1,p2,p3; @@ ( if ((x = capi_ctr_get@p1(...)) == NULL || ...) S | x = capi_ctr_get@p1(...) ... when != x if (x == NULL || ...) S ) <... if@p3 (...) { ... when != capi_ctr_put(x) when != if (x) { ... capi_ctr_put(x); ...} return@p2 ...; } ...> ( return x; | return 0; | x = E | E = x | capi_ctr_put(x) ) @exists@ position r.p1,r.p2,r.p3; expression x; int ret != 0; statement S; @@ * x = capi_ctr_get@p1(...) <... * if@p3 (...) S ...> * return@p2 \(NULL\|ret\); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23netfilter: xt_time gives a wrong monthday in a leap yearKaihui Luo
The function localtime_3 in xt_time.c gives a wrong monthday in a leap year after 28th 2. calculating monthday should use the array days_since_leapyear[] not days_since_year[] in a leap year. Signed-off-by: Kaihui Luo <kaih.luo@gmail.com> Acked-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22cxgb3: Use SKB list interfaces instead of home-grown implementation.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22bluetooth: hci_bcsp: Use SKB list interfaces instead of home-grown stuff.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22aoe: Use SKB interfaces for list management instead of home-grown stuff.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22net: Add new interfaces for SKB list light-weight init and splicing.David S. Miller
This will be used by subsequent changesets. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22atm: idt77252: Use generic SKB queue management instead of home-grown scheme.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22net: Remove __skb_insert() calls outside of skbuff internals.David S. Miller
This minor cleanup simplifies later changes which will convert struct sk_buff and friends over to using struct list_head. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: advertise MSS requested by userTom Quetchenbach
I'm trying to use the TCP_MAXSEG option to setsockopt() to set the MSS for both sides of a bidirectional connection. man tcp says: "If this option is set before connection establishment, it also changes the MSS value announced to the other end in the initial packet." However, the kernel only uses the MTU/route cache to set the advertised MSS. That means if I set the MSS to, say, 500 before calling connect(), I will send at most 500-byte packets, but I will still receive 1500-byte packets in reply. This is a bug, either in the kernel or the documentation. This patch (applies to latest net-2.6) reduces the advertised value to that requested by the user as long as setsockopt() is called before connect() or accept(). This seems like the behavior that one would expect as well as that which is documented. I've tried to make sure that things that depend on the advertised MSS are set correctly. Signed-off-by: Tom Quetchenbach <virtualphtn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21net: Use hton[sl]() instead of __constant_hton[sl]() where applicableArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21multiq: requeue should rewind the current_bandAlexander Duyck
Currently dequeueing a packet and requeueing the same packet will cause a different packet to be pulled on the next dequeue. This change forces requeue to rewind the current_band. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: back retransmit_high when it over-estimatedIlpo Järvinen
If lost skb is sacked, we might have nothing to retransmit as high as the retransmit_high is pointing to, so place it lower to avoid unnecessary walking. This is mainly for the case where high L'ed skbs gets sacked. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: don't clear lost_skb_hint when not necessaryIlpo Järvinen
Most importantly avoid doing it with cumulative ACK. However, since we have lost_cnt_hint in the picture as well needing adjustments, it's not as trivial as dealing with retransmit_skb_hint (and cannot be done in the all place we could trivially leave retransmit_skb_hint untouched). With the previous patch, this should mostly remove O(n^2) behavior while cumulative ACKs start flowing once rexmit after a lossy round-trip made it through. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: don't clear retransmit_skb_hint when not necessaryIlpo Järvinen
Most importantly avoid doing it with cumulative ACK. Not clearing means that we no longer need n^2 processing in resolution of each fast recovery. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: remove retransmit_skb_hint clearing from failureIlpo Järvinen
This doesn't much sense here afaict, probably never has. Since fragmenting and collapsing deal the hints by themselves, there should be very little reason for the rexmit loop to do that. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: reorganize retransmit code loopsIlpo Järvinen
Both loops are quite similar, so they can be combined with little effort. As a result, forward_skb_hint becomes obsolete as well. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: remove tp->lost_out guard to make joining diff nicerIlpo Järvinen
The validity of the retransmit_high must then be ensured if no L'ed skb exits! This makes a minor change to behavior, we now have to iterate the head to find out that the loop terminates. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: Reorganize skb tagbit checksIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: remove obsolete validity concernIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: add tcp_can_forward_retransmitIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: No need to clear retransmit_skb_hint when SACKingIlpo Järvinen
Because lost counter no longer requires tuning, this is trivial to remove (the tuning wouldn't have been too hard either) because no "new" retransmittable skb appeared below retransmit_skb_hint when SACKing for sure. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: Kill precaution that's very likely obsoleteIlpo Järvinen
I suspect it might have been related to the changed amount of lost skbs, which was counted by retransmit_cnt_hint that got changed. The place for this clearing was very illogical anyway, it should have been after the LOST-bit clearing loop to make any sense. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: convert retransmit_cnt_hint to seqnoIlpo Järvinen
Main benefit in this is that we can then freely point the retransmit_skb_hint to anywhere we want to because there's no longer need to know what would be the count changes involve, and since this is really used only as a terminator, unnecessary work is one time walk at most, and if some retransmissions are necessary after that point later on, the walk is not full waste of time anyway. Since retransmit_high must be kept valid, all lost markers must ensure that. Now I also have learned how those "holes" in the rexmittable skbs can appear, mtu probe does them. So I removed the misleading comment as well. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: add helper for lost bit togglingIlpo Järvinen
This useful because we'd need to verifying soon in many places which makes things slightly more complex than it used to be. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: move tcp_verify_retransmit_hintIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-21tcp: Partial hint clearing has again become meaninglessIlpo Järvinen
Ie., the difference between partial and all clearing doesn't exists anymore since the SACK optimizations got dropped by an sacktag rewrite. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-09-19qlge: Protect qlge_resume() with CONFIG_PMDavid S. Miller
Fixes the following build warning: drivers/net/qlge/qlge_main.c:3897: warning: ‘qlge_resume’ defined but not used Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19qlge: Fix warnings in debugging code.David S. Miller
drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_qdev’: drivers/net/qlge/qlge_dbg.c:369: warning: cast to pointer from integer of different size drivers/net/qlge/qlge_dbg.c:373: warning: cast to pointer from integer of different size drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_tx_ring’: drivers/net/qlge/qlge_dbg.c:457: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:461: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_rx_ring’: drivers/net/qlge/qlge_dbg.c:557: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:565: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:575: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:579: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:598: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ drivers/net/qlge/qlge_dbg.c:602: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’ Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19Merge branch 'new-drivers' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-09-19net: Fix build with ARCH=umDavid S. Miller
If UM is going to claim that it supports DMA by setting HAS_DMA, it should provide a dma_mapping_error() implementation. Based upon a report by Julius Volz. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18ISDN sockets: add missing lockdep stringsRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18bnx2: Remove timer_interval field from the bnx2 structureBenjamin Li
The timer_interval field is only assigned once, and never reassigned. We can safely replace all instances of the timer_interval with a constant value. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18bnx2: Remove name field from bnx2 structureBenjamin Li
The name of the board is only used during the initialization of the adapter. We can save the space of a pointer by not storing this information. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18bnx2: Update MODULE_DESCRIPTION to include the 5716Benjamin Li
Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18bnx2: In bnx2_set_mac_link() return void rather then intBenjamin Li
bnx2_set_mac_link() doesn't need to return any error codes. And all the callers don't check the return code. It is safe to change the return type to a void. Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-18qlge: New Qlogic 10Gb Ethernet Driver.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18jme: JMicron Gigabit Ethernet DriverGuo-Fu Tseng
Supporting JMC250, and JMC260. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Acked-and-tested-by: Ethan Hsiao <ethanhsiao@jmicron.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18enic: add Cisco 10G Ethernet NIC driverScott Feldman
Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v0.10.2 at 2024-11-09 16:59:47 (GMT)