summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-18net: correct off-by-one write allocations reportsEric Dumazet
commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. We need to take into account this offset when reporting sk_wmem_alloc to user, in PROC_FS files or various ioctls (SIOCOUTQ/TIOCOUTQ) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18via-velocity : fix no link detection on bootSéguier Régis
on boot, link is always up. Signed-off-by: Seguier Regis <rseguier@e-teleport.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18Net / e100: Fix suspend of devices that cannot be power managedRafael J. Wysocki
If the adapter is not power-manageable using either ACPI, or the native PCI PM interface, __e100_power_off() returns error code, which causes every attempt to suspend to fail, although it should return 0 in such a case. Fix this problem by ignoring the return value of pci_set_power_state() in __e100_power_off(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Andreas Mohr <andi@lisas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18TI DaVinci EMAC : Fix rmmod errorchaithrika@ti.com
clk_disable was called twice in the remove function. Correct this so that the driver module unloads without error. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18net: group address list and its countJiri Pirko
This patch is inspired by patch recently posted by Johannes Berg. Basically what my patch does is to group list and a count of addresses into newly introduced structure netdev_hw_addr_list. This brings us two benefits: 1) struct net_device becames a bit nicer. 2) in the future there will be a possibility to operate with lists independently on netdevices (with exporting right functions). I wanted to introduce this patch before I'll post a multicast lists conversion. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 4 +- drivers/net/e1000/e1000_main.c | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/mv643xx_eth.c | 2 +- drivers/net/niu.c | 4 +- drivers/net/virtio_net.c | 10 ++-- drivers/s390/net/qeth_l2_main.c | 2 +- include/linux/netdevice.h | 17 +++-- net/core/dev.c | 130 ++++++++++++++++++-------------------- 9 files changed, 89 insertions(+), 90 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18ipv4: Fix fib_trie rebalancing, part 2Jarek Poplawski
My previous patch, which explicitly delays freeing of tnodes by adding them to the list to flush them after the update is finished, isn't strict enough. It treats exceptionally tnodes without parent, assuming they are newly created, so "invisible" for the read side yet. But the top tnode doesn't have parent as well, so we have to exclude all exceptions (at least until a better way is found). Additionally we need to move rcu assignment of this node before flushing, so the return type of the trie_rebalance() function is changed. Reported-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18pkt_sched: Update drops stats in act_policeJarek Poplawski
Action police statistics could be misleading because drops are not shown when expected. With feedback from: Jamal Hadi Salim <hadi@cyberus.ca> Reported-by: Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sky2: version 1.23Stephen Hemminger
Version bump. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sky2: add GRO supportStephen Hemminger
Add support for generic receive offload. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sky2: skb recyclingStephen Hemminger
This patch implements skb recycling. It reclaims transmitted skb's for use in the receive ring. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sky2: reduce default transmit ringStephen Hemminger
Reduce the size of the driver transmit ring to reduce latency and allow qdisc to do better rate control. Also make it obvious what the minimum transmit ring allowed is and why. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sky2: receive counter updateStephen Hemminger
Since it is likely that there are multiple packets received per interrupt, only update the receive counters once after all packets are processed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sky2: fix shutdown synchronizationStephen Hemminger
The logic in sky2_down was incorrect. Receiver could report status after rx_stop was called. The steps need to be: * stop new frames from being transmitted * shut off transmit/receive logic * synchronize with NAPI to process status info about transmitter and receiver Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sky2: PCI irq issuesStephen Hemminger
Add some read's to avoid any PCI posting issues when controlling irq's. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sky2: more receive shutdownStephen Hemminger
Reset more parts of the receive path when device is take offline. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sky2: turn off pause during shutdownStephen Hemminger
This unblocks the chip if it is stuck in pause cycle during shutdown. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18r8169: do not bring device down when suspendingfrançois romieu
Stopping all activity through ChipCmd and blindly acking the irqs is neither nice nor completely needed: the transition to low-power mode does enough work and it apparently keeps the device in a sane state. Patch suggested by a fix for http://bugzilla.kernel.org/show_bug.cgi?id=9512 The rtl_shutdown path is kept unchanged so far. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Anders Eriksson <aeriksson@fastmail.fm> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18sis190: use an adequate phy list entry as a fallbackfrançois romieu
When sis190 driver is trying to get default phy, if it doesn't find home or lan phy, it falls back to the first phy in the phy list but list_entry() points to a bogus entry. list_first_entry() should be used instead. Signed-off-by: Arnaud Patard <apatard@mandriva.com> Acked-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18net/ucc_geth: Add SGMII support for UCC GETH driverHaiying Wang
-- derived from reverted commit 047584ce94108012288554a5f84585d792cc7f8f -- reworked by Grant Likely to play nice with commit: "net: Rework ucc_geth driver to use of_mdio infrastructure" (0b9da337dca972e7a4144e298ec3adb8f244d4a4) Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18Revert "net/ucc_geth: Add SGMII support for UEC GETH driver"Grant Likely
This reverts commit 047584ce94108012288554a5f84585d792cc7f8f. This patch meshes badly with "net: Rework ucc_geth driver to use of_mdio infrastructure" (0b9da337dca972e7a4144e298ec3adb8f244d4a4). Since most of the patch needs to be reworked, it is clearer to revert the patch and then apply the corrected version Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18skbuff: don't corrupt mac_header on skb expansionStephen Hemminger
The skb mac_header field is sometimes NULL (or ~0u) as a sentinel value. The places where skb is expanded add an offset which would change this flag into an invalid pointer (or offset). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18skbuff: skb_mac_header_was_set is always true on >32 bitStephen Hemminger
Looking at the crash in log_martians(), one suspect is that the check for mac header being set is not correct. The value of mac_header defaults to 0 on allocation, therefore skb_mac_header_was_set will always be true on platforms using NET_SKBUFF_USES_OFFSET. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17net: sk_wmem_alloc has initial value of one, not zeroEric Dumazet
commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. Some protocols check sk_wmem_alloc value to determine if a timer must delay socket deallocation. We must take care of the sk_wmem_alloc value being one instead of zero when no write allocations are pending. Reported by Ingo Molnar, and full diagnostic from David Miller. This patch introduces three helpers to get read/write allocations and a followup patch will use these helpers to report correct write allocations to user. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17phy_device: fix parameter name in kernel-docRandy Dunlap
Fix kernel-doc parameter name in phy_device.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17net: fix network drivers ndo_start_xmit() return valuesPatrick McHardy
Fix up remaining drivers returning a magic or an errno value from their ndo_start_xmit() functions that were missed in the first pass: - isdn_net: missed conversion - bpqether: missed conversion: skb is freed, so return NETDEV_TX_OK - hp100: intention appears to be to resubmit skb once resources are available, but due to no queue handling it is dropped for now. - lapbether: skb is freed, so return NETDEV_TX_OK Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17vxge: Enable SRIOV support in the driver.Sivakumar Subramani
- Enabled SRIOV support in the driver. - Call __vxge_hw_verify_pci_e_info() for the PF only. This function verifies the negotiated link width and current link speed in the Link Status Register (offset 12h) which are reserved fields for VFs as per the SRIOV specification, section 3.5.8. - Implemented David Miller's comment to remove the #ifdef CONFIG_PCI_IOV as these intefaces have NOP versions declared when the defintion is not set. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Rastapur Santosh <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17skbuff.h: fix skb_dst kernel-docRandy Dunlap
Fix kernel-doc warnings (missing + extra entries) in skbuff.h. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sonic: Fix build after ndo_start_xmit() changes.David S. Miller
Noticed by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16x25: Fix sleep from timer on socket destroy.David S. Miller
If socket destuction gets delayed to a timer, we try to lock_sock() from that timer which won't work. Use bh_lock_sock() in that case. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Ingo Molnar <mingo@elte.hu>
2009-06-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-06-16sky2: don't look for VPD sizeStephen Hemminger
The code to compute VPD size didn't handle some systems that use chip without VPD. Also some of the newer chips use some additional registers to store the actual size, and wasn't worth putting the additional complexity in, so just remove the code. No big loss since the code to set the VPD size was only a convenience so that utilities would not read the extra space past the end of the available VPD. Move the first PCI config read earlier to detect bad hardware where it returns all ones and refuse loading driver before furthur damage. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15mac80211: fix wext bssid/ssid settingJohannes Berg
When changing to a new BSSID or SSID, the code in ieee80211_set_disassoc() needs to have the old data still valid to be able to disconnect and clean up properly. Currently, however, the old data is thrown away before ieee80211_set_disassoc() is ever called, so fix that by calling the function _before_ the old data is overwritten. This is (one of) the issue(s) causing mac80211 to hold cfg80211's BSS structs forever, and them thus being returned in scan results after they're long gone. http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2015 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: process rx packet if we are waiting for CABGabor Juhos
If we are in PS mode, we have to process the received frame if the SC_OP_WAIT_FOR_CAB bit is set. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: prevent sleeping while we are waiting for CABGabor Juhos
We have to remain awake if the SC_OP_WAIT_FOR_CAB flag is set. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: restore power mode on error pathGabor Juhos
The ath9k_ps_{wakeup,restore} calls must be in balance. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15dell-laptop: fix rfkill conversionJohannes Berg
A polarity error snuck into the rfkill rewrite's dell-laptop conversion, fix it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15rfkill: improve docsJohannes Berg
Now that the dust has settled a bit, improve the docs on rfkill and include more information about /dev/rfkill. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15mac80211: disconnect when user changes channelJohannes Berg
If we do not disconnect when a channel switch is requested, we end up eventually detection beacon loss from the AP and then disconnecting, without ever really telling the AP, so we might just as well disconnect right away. Additionally, this fixes a problem with iwlwifi where the driver will clear some internal state on channel changes like this and then get confused when we actually go clear that state from mac80211. It may look like this patch drops the no-IBSS check, but that is already handled by cfg80211 in the wext handler it provides for IBSS (cfg80211_ibss_wext_siwfreq). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15mac80211: add queue debugfs fileJohannes Berg
I suspect that some driver bugs can cause queues to be stopped while they shouldn't be, but it's hard to find out whether that is the case or not without having any visible information about the queues. This adds a file to debugfs that allows us to see the queues' statuses. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: port to cfg80211 rfkillJohannes Berg
This ports the ath9k rfkill code to the new API offered by cfg80211 and thus removes a lot of useless stuff. ("With this series a kernel panic, which is a regression, during module unload disappears." -- Vasanthakumar Thiagarajan <vasanth@atheros.com> Other patches in the series: ath9k: Add helper to get ath9k specific current channel ath9k: Make sure we have current channel in ah_curchan before rf disable/enable -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Rodriguez <mcgrof@gmail.com> Tested-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: Make sure we have current channel in ah_curchan before rf disable/enableVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: Add helper to get ath9k specific current channelVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath5k: fix mesh beaconingNick Kossifidis
This patch is from Nick Kossifidis but he forgot to send it. It ensures that the beacon queue gets started in mesh mode as well, otherwise ath5k will not beacon in mesh point mode. At this time, we still need to issue a scan before mesh beaconing will work but that appears to be a separate problem. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi/iwl3945: fix suspend resume association bugAbhijeet Kolekar
Patch fixes the following bugs at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2005 http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2007 If we suspend with an association and then resumed, we need to synchronize the active rxon with staging rxon, else we will get an error when iwl_alive_start try to commit rxon and staging is set to channel 0. Before going to suspend staging and active rxon are in sync. After resuming from the suspend, iwl_mac_start is called and it clears the staging rxon. Patch fixes the bug by not clearing the staging rxon in iwl_mac_start. Patch also adds similar fix to 3945. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: check for channel location for 40MHzWey-Yi Guy
for both mixed and pure 40MHz, need to check for valid channel location. if the specified channel not allow the channel location requested (ABOVE, BELOW), then reject the Fat channel access This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1988 ("iwlwifi: checking for 40MHz mode" and "iwlwifi: check control channel for pure 40MHz" combine with this to address the above bug. -- JWL) Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: check control channel for pure 40MHzWey-Yi Guy
for pure 40MHz mode, set the control channel location if provided, but not like Mixed mode; if information is not provided, still allow 40MHz operation. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: checking for 40MHz modeWey-Yi Guy
when checking for 40MHz, compare ht_protection to IEEE80211_HT_OP_MODE_PROTECTION_20MHZ. ht_protection is not a bit-mask field Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: revamp bss_info_changedJohannes Berg
My earlier patch, "mac80211: unify config_interface and bss_info_changed" introduced a bug in iwlwifi where it will do some things incorrectly now when reassociating. Revamp iwl_bss_info_changed to fix that issue and make it easier to read. Also, while at it, add comments about things that it should do but currently doesn't. Finally, also improve the locking in the function. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15net/libertas: don't recursive spin lock in if_spi_e2h()Sebastian Andrzej Siewior
|BUG: spinlock recursion on CPU#0, lbs_spi_thread/1030 | lock: dee9a1bc, .magic: dead4ead, .owner: lbs_spi_thread/1030, .owner_cpu: 0 |Call Trace: |[deec3eb0] [c0007220] show_stack+0x4c/0x15c (unreliable) |[deec3ef0] [c0187720] spin_bug+0x9c/0xb0 |[deec3f10] [c0187890] _raw_spin_lock+0x54/0x148 |[deec3f40] [c02d260c] _spin_lock_irqsave+0x2c/0x44 |[deec3f60] [e8671800] lbs_queue_event+0x7c/0x130 [libertas] |[deec3f80] [e8725f04] lbs_spi_thread+0x538/0x58c [libertas_spi] |[deec3fe0] [c004f270] kthread+0x4c/0x88 |[deec3ff0] [c000f33c] kernel_thread+0x4c/0x68 if_spi_e2h() is grabbing ->driver_lock just while calling lbs_queue_event() which is grabbing the same lock. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15libertas: fix IEEE PS mode in GSPI driverAndrey Yurovsky
The card firmware does not set the Command Download Ready interrupt bit when IEEE PS mode is enabled, preventing the driver from sending commands (such as the command to exit IEEE PS mode) since there is no indication that the card is ready to accept commands. This patch works around the problem by using the the TX Download Ready bit in place of the Command Download Ready Bit while in IEEE PS mode. TX Download Ready is set in IEEE PS mode. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-11-10 16:20:59 (GMT)