summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-25spi/pl022: Devicetree support w/o platform dataRoland Stigge
Even with devicetree support, we needed platform data to provide some data, leading to mixed device tree and platform data. This patch makes it possible to provide all that information via device tree. Now, the data must be provided via platform data _or_ device tree completely. Only in case of DMA where a callback specification is necessary (dma_filter()), platform data is the only option. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-25spi/s3c64xx: Don't free controller_data on non-dt platformsSylwester Nawrocki
When s3c64xx-spi is instantiated from device tree an instance of struct s3c64xx_spi_csinfo is dynamically allocated in the driver. For non-dt platform it is passed from board code through spi_register_board_info(). On error path in s3c64xx_spi_setup() function there is an attempt to free this data struct s3c64xx_spi_csinfo object as it would have been allocated in the driver for both, dt and non-dt based platforms. This leads to following bug when gpio request fails: spi spi1.0: Failed to get /CS gpio [21]: -16 kernel BUG at mm/slub.c:3478! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Not tainted (3.6.0-rc5-00092-g9b0b493-dirty #6111) PC is at kfree+0x148/0x158 LR is at s3c64xx_spi_setup+0xac/0x290 pc : [<c00a513c>] lr : [<c0227014>] psr: 40000013 sp : ee043e10 ip : c032883c fp : c0481f7c r10: ee0abd80 r9 : 00000063 r8 : 00000000 r7 : ee129e78 r6 : ee104a00 r5 : fffffff0 r4 : c047bc64 r3 : 40000400 r2 : c047bc64 r1 : c04def60 r0 : 0004047b Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee0422f0) Stack: (0xee043e10 to 0xee044000) ... [<c00a513c>] (kfree+0x148/0x158) from [<c0227014>] (s3c64xx_spi_setup+0xac/0x290) [<c0227014>] (s3c64xx_spi_setup+0xac/0x290) from [<c02251a4>] (spi_setup+0x34/0x4c) [<c02251a4>] (spi_setup+0x34/0x4c) from [<c02258d0>] (spi_add_device+0x98/0x128) [<c02258d0>] (spi_add_device+0x98/0x128) from [<c02259d4>] (spi_new_device+0x74/0xa8) [<c02259d4>] (spi_new_device+0x74/0xa8) from [<c0225a2c>] (spi_match_master_to_boardinfo+0x24/0x44) [<c0225a2c>] (spi_match_master_to_boardinfo+0x24/0x44) from [<c0225b40>] (spi_register_master+0xf4/0x2a8) [<c0225b40>] (spi_register_master+0xf4/0x2a8) from [<c043fe0c>] (s3c64xx_spi_probe+0x34c/0x42c) [<c043fe0c>] (s3c64xx_spi_probe+0x34c/0x42c) from [<c01fc198>] (platform_drv_probe+0x18/0x1c) There should be no attempt to kfree controller_data when it was externally provided through the board code. Fix this by freeing controller_data only when dev->of_node is not null. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22spi: omap2-mcspi: add pinctrl supportMatt Porter
Adds pinctrl support to support OMAP platforms that boot from DT and rely on pinctrl support to set pinmuxes. Signed-off-by: Matt Porter <mporter@ti.com> Acked-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-20spi/pl022: adopt pinctrl supportPatrice Chotard
Amend the PL022 pin controller to optionally take a pin control handle and set the state of the pins to "default" on boot and runtime resume, and to "sleep" at runtime suspend. This way we will dynamically save power on the SPI busses, for example some electronic designs may be able to ground the pins when unused instead of pull-up. Some pin controllers may want to set the pins as wake-up sources when sleeping. Effect on platforms using the PL022 driver: - If the platform does not use pin control - no semantic effect, the pinctrl stubs will kick in and resolve the situation. - Platforms using this driver and have pin control but no function defined for the PL022 need to either supply a "default" function in their map or enable pinctrl dummies so the driver is satisfied. - Platforms using this driver with hogs for setting up the PL022 pin control - stop using hogs to take the pl022 pin control handle, let the driver handle this. I'be looked at some platforms that may be affected: - SPEAr: appears to define the proper functions in their device trees and not hogging them, so things should be smooth, the driver will simply start to take its pins. - Ux500: the proper function is defined and will be taken properly by the driver. New sleep states introduced by a separate patch to ux500 but no regression, since the default state is sufficient. - U300: old hog deleted as part of this patch. - LPC32xx: does not appear to be using pinctrl. - ARM Integrator IMPD1, RealView & Versatile: does not use pinctrl. Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12spi: omap2-mcspi: Cleanup the omap2_mcspi_txrx_dma functionShubhrajyoti D
Currently in omap2_mcspi_txrx_dma the tx and the rx support is interleaved. Make the rx related code in omap2_mcspi_rx_dma and the tx related code omap2_mcspi_tx_dma and call the functions. While at it remove the braces in the if statements which has only one line. Also fix ["foo * bar" to "foo *bar"] warn for the rx and tx variables. Only a cleanup no functional change. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-07spi/gpio: Fix stub for spi_gpio_probe_dt()Mark Brown
The gpio_ was missing from the name. Add a name for the parameter while we're at it since GCC warns. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05spi: spi-sh-hspi: drop frees of devm_ alloc'd dataJulia Lawall
devm free functions should not have to be explicitly used. A semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ ( * devm_kfree(...); | * devm_free_irq(...); | * devm_iounmap(...); | * devm_release_region(...); | * devm_release_mem_region(...); ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05spi/pl022: Fix chipselects pointer computationRoland Stigge
The new chip select handling via GPIO introduced a pointer computation bug: (int *) pl022 + sizeof(struct pl022) doesn't point to the data immediately after the actual struct pl022 (as was intended) but to a multiple of bytes after it because of the (int *) type. Replacing the kludgy pointer arithmetic with managed memory allocation for the chip selects. Reported-by: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05spi: spi-tle62x0: Use module_spi_driver macroSachin Kamat
module_spi_driver eliminates module_init and module_exit calls and makes the code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05spi: spi-gpio: Add DT bindingsDaniel Mack
This patch adds DT bindings to the spi-gpio driver and some documentation about how to use it. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-05spi: spi-gpio: store chipselect information in private structureDaniel Mack
The spi-gpio driver currently assumes the chipselect gpio number is stored in ->controller_data of the device's static board information. In devicetree environments, this information is unavailable and has to be derived from the DT node. This patch moves the gpio storage to the controller's private data so the DT bindings can easily build upon the driver. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27spi/s3c64xx: Drop extra calls to spi_master_get in suspend/remove functionsGuenter Roeck
Suspend and resume functions call spi_master_get() without matching spi_master_put(). The extra references are unnecessary and cause subsequent module unload attempts to fail. Drop the calls. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27spi/topcliff-pch: Fix device remove functionGuenter Roeck
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which results in device memory being freed. An extra call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Also, the device subsystem resets device driver data to NULL after the call to the remove function returns, so there is no need to do it here. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27spi/tegra: Fix device remove functionGuenter Roeck
The call to spi_unregister_master() in the device remove function frees device memory, and with it any device local data. However, device local data is still accessed after the call to spi_unregister_master(). Acquire a reference to the SPI master device and release it after cleanup is complete to solve the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27spi/stmp: Fix device remove functionGuenter Roeck
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which results in device memory being freed. The remove function accesses the freed memory after the call to spi_unregister_master(), _and_ it calls spi_master_put on the freed memory. Acquire a reference to the SPI master device and release it after cleanup is complete (with the existing spi_master_put) to solve the problem. Also, the device subsystem ensures that the remove function is only called once, and resets device driver data to NULL. Remove the respective check and drop the unnecessaary call to platform_set_drvdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-23spi/sc18is602: Return -EINVAL for probe failures due to I2C function mismatchGuenter Roeck
If the I2C bus master driver does not support the required functionality, the driver returns -ENODEV. This causes a silent probe failure without error message. Since the device has to be explicitly instantiated, and the user should know the correct bus, this event really reflects an error condition. Replace error return value with -EINVAL to trigger an error message showing that the probe function failed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/dt: DT bindings documentation: "num-cs" property for SPI controllersRoland Stigge
Several SPI controller drivers have defined differently named properties for the number of chip selects. Now adding "num-cs" as a reference name for new bindings. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/pl022: Add devicetree supportRoland Stigge
This patch adds device tree support to the spi-pl022 driver. Based on the initial patch by Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/pl022: Add chip select handling via GPIORoland Stigge
This patch adds the ability for the driver to control the chip select directly. This enables independence from cs_control callbacks. Configurable via platform_data, to be extended as DT in the following patch. Based on the initial patch by Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi: Master driver for NXP SC18IS602/603Guenter Roeck
This driver adds support for NXP SC18IS602/603 I2C to SPI bus bridge. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/mpc512x-psc: Avoid access to freed memory in device remove functionGuenter Roeck
The call to spi_unregister_master() in the device remove function frees device memory, and with it any device local data. However, device local data is still accessed after the call to spi_unregister_master(). Acquire a reference to the SPI master device and release it after cleanup is complete to solve the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/mpc52xx-psc: Avoid access to freed memory in device remove functionGuenter Roeck
The call to spi_unregister_master() in the device remove function frees device memory, and with it any device local data. However, device local data is still accessed after the call to spi_unregister_master(). Acquire a reference to the SPI master device and release it after cleanup is complete to solve the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/mpc52xx: Fix device remove functionGuenter Roeck
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which results in device memory being freed. An extra call to spi_master_put is unnecessary and results in an access to free memory. At the same time, since the call to spi_unregister_master results in device memory being freed, it must no longer be accessed afterwards. To fix both problems, call spi_master_get to get an extra reference to the device, and call spi_master_put only after the last access to device data. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/mpc52xx: Fix error handling in probe functionGuenter Roeck
The call to spi_master_put() is needed to free device memory. It must be called after spi_alloc_master, and must only be called after the device memory is no longer used. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/pl022: Fix device remove functionGuenter Roeck
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which results in device memory being freed. An extra call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi: omap2-mcspi: At remove dont use the runtime_autosuspend callsShubhrajyoti D
At remove we shouldnt be using the autosuspend timeout as we are calling pm_runtime_disable immediately after. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi: omap2-mcspi: Call pm_runtime_* functions directlyShubhrajyoti D
Call the pm_runtime functions directly making room for possible pm optimisations. Also the runtime functions aren't just about enabling and disabling of clocks though it does enable clocks also. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi: omap2-mcspi: Remove the macro MOD_REG_BITShubhrajyoti D
Remove the macro MOD_REG_BIT instead make the bit field modifications directly. This deletes a branch operation in cases where the the set is predecided. While at it optimise two sequential bit clear in one step. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22drivers/spi/spi-s3c24xx.c: fix error return codeJulia Lawall
Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-17spi: omap2-mcspi: Remove the call to platform_set_drvdata(pdev, NULL)Shubhrajyoti D
Remove the call of platform_set_drvdata(pdev, NULL) as they are not needed anymore. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-17spi: spi-altera: Use of_match_ptrTobias Klauser
Instead of having to define the match table to NULL if CONFIG_OF isn't set, use the of_match_ptr() macro which will do this for us. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-17spi: Refactor spi-orion to use SPI framework queue.Andrew Lunn
Replace the deprecated master->transfer with transfer_one_message() and allow the SPI subsystem handle all the queuing of messages. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-16Linux 3.6-rc2Linus Torvalds
2012-08-16autofs4 - fix get_next_positive_subdir()Ian Kent
Following a report of a crash during an automount expire I found that the locking in fs/autofs4/expire.c:get_next_positive_subdir() was wrong. Not only is the locking wrong but the function is more complex than it needs to be. The function is meant to calculate (and dget) the next entry in the list of directories contained in the root of an autofs mount point (an autofs indirect mount to be precise). The main problem was that the d_lock of the owner of the list was not being taken when walking the list, which lead to list corruption under load. The only other lock that needs to be taken is against the next dentry candidate so it can be checked for usability. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-16Merge tag 'vfio-for-v3.6-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fix from Alex Williamson: "Just a trivial patch to include vfio.h in the installed headers so we can complete userspace integration into QEMU." * tag 'vfio-for-v3.6-rc1' of git://github.com/awilliam/linux-vfio: vfio: Include vfio.h in installed headers
2012-08-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: verify all ioctl retry iov elements fuse: add missing INIT flag descriptions fuse: add missing INIT flags fuse: update attributes on aio_read fuse: invalidate inode mapping if mtime changes fuse: add FUSE_AUTO_INVAL_DATA init flag
2012-08-16Merge tag 'stable/for-linus-3.6-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fix from Konrad Rzeszutek Wilk: "Way back in v3.5 we added a mechanism to populate back pages that were released (they overlapped with MMIO regions), but neglected to reserve the proper amount of virtual space for extend_brk to work properly. Coincidentally some other commit aligned the _brk space to larger area so I didn't trigger this until it was run on a machine with more than 2GB of MMIO space." * On machines with large MMIO/PCI E820 spaces we fail to boot b/c we failed to pre-allocate large enough virtual space for extend_brk. * tag 'stable/for-linus-3.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back.
2012-08-16Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: intc: Handle domain association for sparseirq pre-allocated vectors. sh: sh7269: Fix LCD pinmux sh: dma: fix request_irq usage
2012-08-16MAINTAINERS: update address for Dan WilliamsDan Williams
Moved to djbw@fb.com Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Dan Williams <djbw@fb.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-16scripts/decodecode: Fixup trapping instruction markerBorislav Petkov
When dumping "Code: " sections from an oops, the trapping instruction %rip points to can be a string copy 2b:* f3 a5 rep movsl %ds:(%rsi),%es:(%rdi) and the line contain a bunch of ":". Current "cut" selects only the and the second field output looks funnily overlaid this: 2b:* f3 a5 rep movsl %ds <-- trapping instruction:(%rsi),%es:(%rdi Fix this by selecting the remaining fields too. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kbuild@vger.kernel.org Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-16Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull two slave-dmaengine fixes from Vinod Koul: "One fixes the correct use of clock API in imx driver and the other enables clock for tegra driver, which is used for other tegra driver conversion to dmanegine in -next." * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: enable/disable dma clock dma: imx-dma: Fix kernel crash due to missing clock conversion
2012-08-16Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull more drm fixes from Dave Airlie: "Just some intel and nouveau ones this time, intel has more edp panel fixes for macbooks and nouveau has a suspend/resume regression fix in there." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid drm/nve0/fifo: add support for the flip completion swmthd
2012-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull two sparc fixes from David S. Miller. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Be less verbose during vmemmap population. sparc64: do not clobber personality flags in sys_sparc64_personality()
2012-08-15Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel Vetter writes: "A few important fixers: - fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai) - make the retina mbp work (ignore bogus edp bpc value in vbt) - fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula) - fix an edp panel power sequence regression, fixes the new macbook air - apply the tlb invalidate w/a Otherwise we still have another gmbus regression (patches are awaiting tested-bys) and there's something odd going with some rare systems not entering rc6 often enough (and hence blowing through too much power). It seems to be a timing-related issue and can be mitigated by frobbing the magic tuning parameters. We're still working on that one. Also, we still have some fallout from the hw context support, but you can only hit that with mesa master." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid
2012-08-15sparc64: Be less verbose during vmemmap population.David S. Miller
On a 2-node machine with 256GB of ram we get 512 lines of console output, which is just too much. This mimicks Yinghai Lu's x86 commit c2b91e2eec9678dbda274e906cc32ea8f711da3b (x86_64/mm: check and print vmemmap allocation continuous) except that we aren't ever going to get contiguous block pointers in between calls so just print when the virtual address or node changes. This decreases the output by an order of 16. Also demote this to KERN_DEBUG. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14drm/i915: Apply post-sync write for pipe control invalidatesChris Wilson
When invalidating the TLBs it is documentated as requiring a post-sync write. Failure to do so seems to result in a GPU hang. Exposure to this hang on IVB seems to be a result of removing the extra stalls required for SNB pipecontrol workarounds: commit 6c6cf5aa9c583478b19e23149feaa92d01fb8c2d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 18:02:28 2012 +0100 drm/i915: Only apply the SNB pipe control w/a to gen6 Note: Manually switch the pipe_control cmd to 4 dwords to avoid a (silent) functional conflict with -next. This way will get a loud (but conflict with next (since the scratch_addr has been deleted there). Reported-and-tested-by: yex.tian@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322 Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: added note about merge conflict with -next.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14drm/i915: reorder edp disabling to fix ivb MacBook AirDaniel Vetter
eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671 Tested-by: Roberto Romer <sildurin@gmail.com> Tested-by: Daniel Wagner <wagi@monom.org> Tested-by: Keith Packard <keithp@keithp.com> Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Included are bug fixes and a patch to enable system call filtering with BPF." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/compat: fix mmap compat system calls s390/compat: fix compat wrappers for process_vm system calls s390: do not clobber personality flags in sys_32_personality() s390/seccomp: add support for system call filtering using BPF s390/sclp_sdias: Add missing break and "fall through" s390/mm: remove MAX_PHYSADDR_BITS define
2012-08-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Radeon and intel fixes mostly, one fix to the mgag200 driver to not hang on certain server variants." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits) drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios drm/mgag200: fix G200ER pll picking algorithm drm/edid: Fix potential memory leak in edid_load() drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB ...
generated by cgit v0.10.2 at 2024-09-24 00:07:19 (GMT)