summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-11net: pktgen: fix null ptr deref in skb allocationJohn Fastabend
Fix possible null pointer dereference that may occur when calling skb_reserve() on a null skb. Fixes: 879c7220e82 ("net: pktgen: Observe needed_headroom of the device") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11Merge branch 'renesas-eth-fixes'David S. Miller
Sergei Shtylyov says: ==================== Fix some dubious code in the Renesas Ethernet drivers Here's a set of 2 patches against DaveM's 'net.git' repo. While initializing EMAC the code tries to respect the duplex mode both programmed into ECMR and stored in its own private data -- this just can't be right. [1/2] ravb: stop reading ECMR in ravb_emac_init() [2/2] sh_eth: stop reading ECMR in sh_eth_dev_init() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11sh_eth: stop reading ECMR in sh_eth_dev_init()Sergei Shtylyov
The code in sh_eth_dev_init() twiddling the ECMR bits always looked a bit strange to me: if one intends to respect 'mdp->duplex', why save old value of the ECMR.DM bit? As all the other bits are zeroed anyway, we don't really need to read ECMR before writing to it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11ravb: stop reading ECMR in ravb_emac_init()Sergei Shtylyov
The code in ravb_emac_init() twiddling the ECMR bits always looked a bit strange to me: if one intends to respect 'priv->duplex', why save old value of the ECMR.DM bit? As all the other bits are zeroed anyway, we don't really need to read ECMR before writing to it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11sched,cls_flower: set key address type when presentJamal Hadi Salim
only when user space passes the addresses should we consider their presence Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11tcp_yeah: don't set ssthresh below 2Neal Cardwell
For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno and CUBIC, per RFC 5681 (equation 4). tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh value if the intended reduction is as big or bigger than the current cwnd. Congestion control modules should never return a zero or negative ssthresh. A zero ssthresh generally results in a zero cwnd, causing the connection to stall. A negative ssthresh value will be interpreted as a u32 and will set a target cwnd for PRR near 4 billion. Oleksandr Natalenko reported that a system using tcp_yeah with ECN could see a warning about a prior_cwnd of 0 in tcp_cwnd_reduction(). Testing verified that this was due to tcp_yeah_ssthresh() misbehaving in this way. Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11sctp: fix use-after-free in pr_debug statementMarcelo Ricardo Leitner
Dmitry Vyukov reported a use-after-free in the code expanded by the macro debug_post_sfx, which is caused by the use of the asoc pointer after it was freed within sctp_side_effect() scope. This patch fixes it by allowing sctp_side_effect to clear that asoc pointer when the TCB is freed. As Vlad explained, we also have to cover the SCTP_DISPOSITION_ABORT case because it will trigger DELETE_TCB too on that same loop. Also, there were places issuing SCTP_CMD_INIT_FAILED and ASSOC_FAILED but returning SCTP_DISPOSITION_CONSUME, which would fool the scheme above. Fix it by returning SCTP_DISPOSITION_ABORT instead. The macro is already prepared to handle such NULL pointer. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11mlxsw: spectrum: Add FDB lock to prevent session interleavingIdo Schimmel
Dumping the FDB (invoked with a process context) or handling FDB notifications (polled periodicly in delayed work) might each entail multiple EMAD transcations due to the number of entries. While we only allow one EMAD transaction at a time, there is nothing stopping the dump and notification processing sessions from interleaving. However, this is forbidden by the hardware, so we need to make sure only one of these sessions can run at a time. Solve this by adding a mutex ('fdb_lock'), as both kernel threads can sleep while waiting for the response EMAD. Fixes: 56ade8fe3f ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11unix: properly account for FDs passed over unix socketswilly tarreau
It is possible for a process to allocate and accumulate far more FDs than the process' limit by sending them over a unix socket then closing them to keep the process' fd count low. This change addresses this problem by keeping track of the number of FDs in flight per user and preventing non-privileged processes from having more FDs in flight than their configured FD limit. Reported-by: socketpair@gmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11ipv6: tcp: add rcu locking in tcp_v6_send_synack()Eric Dumazet
When first SYNACK is sent, we already hold rcu_read_lock(), but this is not true if a SYNACK is retransmitted, as a timer (soft) interrupt does not hold rcu_read_lock() Fixes: 45f6fad84cc30 ("ipv6: add complete rcu protection around np->opt") Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net: sctp: prevent writes to cookie_hmac_alg from accessing invalid memorySasha Levin
proc_dostring() needs an initialized destination string, while the one provided in proc_sctp_do_hmac_alg() contains stack garbage. Thus, writing to cookie_hmac_alg would strlen() that garbage and end up accessing invalid memory. Fixes: 3c68198e7 ("sctp: Make hmac algorithm selection for cookie generation dynamic") Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net: qmi_wwan: Add SIMCom 7230EKristian Evensen
SIMCom 7230E is a QMI LTE module with support for most "normal" bands. Manual testing has showed that only interface five works. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10udp: restrict offloads to one namespaceHannes Frederic Sowa
udp tunnel offloads tend to aggregate datagrams based on inner headers. gro engine gets notified by tunnel implementations about possible offloads. The match is solely based on the port number. Imagine a tunnel bound to port 53, the offloading will look into all DNS packets and tries to aggregate them based on the inner data found within. This could lead to data corruption and malformed DNS packets. While this patch minimizes the problem and helps an administrator to find the issue by querying ip tunnel/fou, a better way would be to match on the specific destination ip address so if a user space socket is bound to the same address it will conflict. Cc: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10vxlan: fix test which detect duplicate vxlan ifaceNicolas Dichtel
When a vxlan interface is created, the driver checks that there is not another vxlan interface with the same properties. To do this, it checks the existing vxlan udp socket. Since commit 1c51a9159dde, the creation of the vxlan socket is done only when the interface is set up, thus it breaks that test. Example: $ ip l a vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip l a vxlan11 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip -br l | grep vxlan vxlan10 DOWN f2:55:1c:6a:fb:00 <BROADCAST,MULTICAST> vxlan11 DOWN 7a:cb:b9:38:59:0d <BROADCAST,MULTICAST> Instead of checking sockets, let's loop over the vxlan iface list. Fixes: 1c51a9159dde ("vxlan: fix race caused by dropping rtnl_unlock") Reported-by: Thomas Faivre <thomas.faivre@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10cdc-acm: fix NULL pointer referenceOliver Neukum
The union descriptor must be checked. Its usage was conditional before the parser was introduced. This is important, because many RNDIS device, which also use the common parser, have bogus extra descriptors. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: Vasily Galkin <galkin-vv@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09r8152: fix the wake eventhayeswang
When the autosuspend is enabled and occurs before system suspend, we should wake the device before running system syspend. Then, we could change the wake event for system suspend. Otherwise, the device would resume the system when receiving any packet. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09phy: micrel: Fix finding PHY properties in MAC node for KSZ9031.Roosen Henri
Commit 651df2183543 ("phy: micrel: Fix finding PHY properties in MAC node.") only fixes finding PHY properties in MAC node for KSZ9021. This commit applies the same fix for KSZ9031. Fixes: 8b63ec1837fa ("phylib: Make PHYs children of their MDIO bus, not the bus' parent.") Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Henri Roosen <henri.roosen@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== Included change: - Fix invalid read while copying bat_iv.bcast_own by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08irda: toim3232-sir: delete some dead codeDan Carpenter
I noticed this code because it has a typo in the module_param(), the "trs" at the end of "toim3232fliptrs" should be "rts". But it's dead code so instead of fixing it, I just deleted it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08isdn: act200: fix MODULE_PARM_DESC() typoDan Carpenter
There is no "membase", it was "act_port" that was intended. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: lan78xx: Fix to write to OTP(One Time Programmable) per magic number.Woojung.Huh@microchip.com
This patch fixes a bug writing to EEPROM in lan78xx_ethtool_set_eeprom() when asked to write to OTP. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07batman-adv: Fix invalid read while copying bat_iv.bcast_ownSven Eckelmann
batadv_iv_ogm_orig_del_if removes a part of the bcast_own which previously belonged to the now removed interface. This is done by copying all data which comes before the removed interface and then appending all the data which comes after the removed interface. The address calculation for the position of the data which comes after the removed interface assumed that the bat_iv.bcast_own is a pointer to a single byte datatype. But it is a pointer to unsigned long and thus the calculated position was wrong off factor sizeof(unsigned long). Fixes: 83a8342678a0 ("more basic routing code added (forwarding packets / bitarray added)") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "As usual, there are a couple straggler bug fixes: 1) qlcnic_alloc_mbx_args() error returns are not checked in qlcnic driver. Fix from Insu Yun. 2) SKB refcounting bug in connector, from Florian Westphal. 3) vrf_get_saddr() has to propagate fib_lookup() errors to it's callers, from David Ahern. 4) Fix AF_UNIX splice/bind deadlock, from Rainer Weikusat. 5) qdisc_rcu_free() fails to free the per-cpu qstats. Fix from John Fastabend. 6) vmxnet3 driver passes wrong page to dma_map_page(), fix from Shrikrishna Khare. 7) Don't allow zero cwnd in tcp_cwnd_reduction(), from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: fix zero cwnd in tcp_cwnd_reduction Driver: Vmxnet3: Fix regression caused by 5738a09 net: qmi_wwan: Add WeTelecom-WPD600N mkiss: fix scribble on freed memory net: possible use after free in dst_release net: sched: fix missing free per cpu on qstats ARM: net: bpf: fix zero right shift 6pack: fix free memory scribbles net: filter: make JITs zero A for SKF_AD_ALU_XOR_X bridge: Only call /sbin/bridge-stp for the initial network namespace af_unix: Fix splice-bind deadlock net: Propagate lookup failure in l3mdev_get_saddr to caller r8152: add reset_resume function connector: bump skb->users before callback invocation cxgb4: correctly handling failed allocation qlcnic: correctly handle qlcnic_alloc_mbx_args
2016-01-06tcp: fix zero cwnd in tcp_cwnd_reductionYuchung Cheng
Patch 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") introduced a bug that cwnd may become 0 when both inflight and sndcnt are 0 (cwnd = inflight + sndcnt). This may lead to a div-by-zero if the connection starts another cwnd reduction phase by setting tp->prior_cwnd to the current cwnd (0) in tcp_init_cwnd_reduction(). To prevent this we skip PRR operation when nothing is acked or sacked. Then cwnd must be positive in all cases as long as ssthresh is positive: 1) The proportional reduction mode inflight > ssthresh > 0 2) The reduction bound mode a) inflight == ssthresh > 0 b) inflight < ssthresh sndcnt > 0 since newly_acked_sacked > 0 and inflight < ssthresh Therefore in all cases inflight and sndcnt can not both be 0. We check invalid tp->prior_cwnd to avoid potential div0 bugs. In reality this bug is triggered only with a sequence of less common events. For example, the connection is terminating an ECN-triggered cwnd reduction with an inflight 0, then it receives reordered/old ACKs or DSACKs from prior transmission (which acks nothing). Or the connection is in fast recovery stage that marks everything lost, but fails to retransmit due to local issues, then receives data packets from other end which acks nothing. Fixes: 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06Driver: Vmxnet3: Fix regression caused by 5738a09Shrikrishna Khare
Reported-by: Bingkuo Liu <bingkuol@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: qmi_wwan: Add WeTelecom-WPD600NKristian Evensen
The WeTelecom-WPD600N is an LTE module that, in addition to supporting most "normal" bands, also supports LTE over 450MHz. Manual testing showed that only interface number three replies to QMI messages. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mkiss: fix scribble on freed memoryAlan
commit d79f16c046086f4fe0d42184a458e187464eb83e fixed a user triggerable scribble on free memory but added a new one which allows the user to scribble even more and user controlled data into freed space. As with 6pack we need to halt the queue before we free the buffers, because the transmit logic is not protected by the semaphore. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: possible use after free in dst_releaseFrancesco Ruggeri
dst_release should not access dst->flags after decrementing __refcnt to 0. The dst_entry may be in dst_busy_list and dst_gc_task may dst_destroy it before dst_release gets a chance to access dst->flags. Fixes: d69bbf88c8d0 ("net: fix a race in dst_release()") Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst") Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: sched: fix missing free per cpu on qstatsJohn Fastabend
When a qdisc is using per cpu stats (currently just the ingress qdisc) only the bstats are being freed. This also free's the qstats. Fixes: b0ab6f92752b9f9d8 ("net: sched: enable per cpu qstats") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06ARM: net: bpf: fix zero right shiftRabin Vincent
The LSR instruction cannot be used to perform a zero right shift since a 0 as the immediate value (imm5) in the LSR instruction encoding means that a shift of 32 is perfomed. See DecodeIMMShift() in the ARM ARM. Make the JIT skip generation of the LSR if a zero-shift is requested. This was found using american fuzzy lop. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-066pack: fix free memory scribblesOne Thousand Gnomes
commit acf673a3187edf72068ee2f92f4dc47d66baed47 fixed a user triggerable free memory scribble but in doing so replaced it with a different one that allows the user to control the data and scribble even more. sixpack_close is called by the tty layer in tty context. The tty context is protected by sp_get() and sp_put(). However network layer activity via sp_xmit() is not protected this way. We must therefore stop the queue otherwise the user gets to dump a buffer mostly of their choice into freed kernel pages. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: filter: make JITs zero A for SKF_AD_ALU_XOR_XRabin Vincent
The SKF_AD_ALU_XOR_X ancillary is not like the other ancillary data instructions since it XORs A with X while all the others replace A with some loaded value. All the BPF JITs fail to clear A if this is used as the first instruction in a filter. This was found using american fuzzy lop. Add a helper to determine if A needs to be cleared given the first instruction in a filter, and use this in the JITs. Except for ARM, the rest have only been compile-tested. Fixes: 3480593131e0 ("net: filter: get rid of BPF_S_* enum") Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05bridge: Only call /sbin/bridge-stp for the initial network namespaceHannes Frederic Sowa
[I stole this patch from Eric Biederman. He wrote:] > There is no defined mechanism to pass network namespace information > into /sbin/bridge-stp therefore don't even try to invoke it except > for bridge devices in the initial network namespace. > > It is possible for unprivileged users to cause /sbin/bridge-stp to be > invoked for any network device name which if /sbin/bridge-stp does not > guard against unreasonable arguments or being invoked twice on the > same network device could cause problems. [Hannes: changed patch using netns_eq] Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05Merge tag 'trace-v4.4-rc4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Two more fixes: 1. The recordmcount change had an output that used sprintf() (incorrectly) when it should have been a fprintf() to stderr. 2. The printk_formats file could crash if someone added a trace_printk() in the core kernel, and also added one in a module. This does not affect production kernels. Only kernels where developers add trace_printk() for debugging can crash" * tag 'trace-v4.4-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix setting of start_index in find_next() ftrace/scripts: Fix incorrect use of sprintf in recordmcount
2016-01-05Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull tile bugfix from Chris Metcalf: "This fixes a bug that Sudip's buildbot found for tilepro allmodconfig. I've tagged it for stable only back to 3.19, which was when most of the other affected architectures added their support for working around this issue" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: provide CONFIG_PAGE_SIZE_64KB etc for tilepro
2016-01-05tile: provide CONFIG_PAGE_SIZE_64KB etc for tileproChris Metcalf
This allows the build system to know that it can't attempt to configure the Lustre virtual block device, for example, when tilepro is using 64KB pages (as it does by default). The tilegx build already provided those symbols. Previously we required that the tilepro hypervisor be rebuilt with a different hardcoded page size in its headers, and then Linux be rebuilt using the updated hypervisor header. Now we allow each of the hypervisor and Linux to be built independently. We still check at boot time to ensure that the page size provided by the hypervisor matches what Linux expects. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: stable@vger.kernel.org [3.19+]
2016-01-05af_unix: Fix splice-bind deadlockRainer Weikusat
On 2015/11/06, Dmitry Vyukov reported a deadlock involving the splice system call and AF_UNIX sockets, http://lists.openwall.net/netdev/2015/11/06/24 The situation was analyzed as (a while ago) A: socketpair() B: splice() from a pipe to /mnt/regular_file does sb_start_write() on /mnt C: try to freeze /mnt wait for B to finish with /mnt A: bind() try to bind our socket to /mnt/new_socket_name lock our socket, see it not bound yet decide that it needs to create something in /mnt try to do sb_start_write() on /mnt, block (it's waiting for C). D: splice() from the same pipe to our socket lock the pipe, see that socket is connected try to lock the socket, block waiting for A B: get around to actually feeding a chunk from pipe to file, try to lock the pipe. Deadlock. on 2015/11/10 by Al Viro, http://lists.openwall.net/netdev/2015/11/10/4 The patch fixes this by removing the kern_path_create related code from unix_mknod and executing it as part of unix_bind prior acquiring the readlock of the socket in question. This means that A (as used above) will sb_start_write on /mnt before it acquires the readlock, hence, it won't indirectly block B which first did a sb_start_write and then waited for a thread trying to acquire the readlock. Consequently, A being blocked by C waiting for B won't cause a deadlock anymore (effectively, both A and B acquire two locks in opposite order in the situation described above). Dmitry Vyukov(<dvyukov@google.com>) tested the original patch. Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05net: Propagate lookup failure in l3mdev_get_saddr to callerDavid Ahern
Commands run in a vrf context are not failing as expected on a route lookup: root@kenny:~# ip ro ls table vrf-red unreachable default root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 ping: Warning: source address might be selected on device other than vrf-red. PING 10.100.1.254 (10.100.1.254) from 0.0.0.0 vrf-red: 56(84) bytes of data. --- 10.100.1.254 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 999ms Since the vrf table does not have a route for 10.100.1.254 the ping should have failed. The saddr lookup causes a full VRF table lookup. Propogating a lookup failure to the user allows the command to fail as expected: root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 connect: No route to host Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05r8152: add reset_resume functionhayeswang
When the reset_resume() is called, the flag of SELECTIVE_SUSPEND should be cleared and reinitialize the device, whether the SELECTIVE_SUSPEND is set or not. If reset_resume() is called, it means the power supply is cut or the device is reset. That is, the device wouldn't be in runtime suspend state and the reinitialization is necessary. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05connector: bump skb->users before callback invocationFlorian Westphal
Dmitry reports memleak with syskaller program. Problem is that connector bumps skb usecount but might not invoke callback. So move skb_get to where we invoke the callback. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04cxgb4: correctly handling failed allocationInsu Yun
Since t4_alloc_mem can be failed in memory pressure, if not properly handled, NULL dereference could be happened. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04qlcnic: correctly handle qlcnic_alloc_mbx_argsInsu Yun
Since qlcnic_alloc_mbx_args can be failed, return value should be checked. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04tracing: Fix setting of start_index in find_next()Qiu Peiyang
When we do cat /sys/kernel/debug/tracing/printk_formats, we hit kernel panic at t_show. general protection fault: 0000 [#1] PREEMPT SMP CPU: 0 PID: 2957 Comm: sh Tainted: G W O 3.14.55-x86_64-01062-gd4acdc7 #2 RIP: 0010:[<ffffffff811375b2>] [<ffffffff811375b2>] t_show+0x22/0xe0 RSP: 0000:ffff88002b4ebe80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 RDX: 0000000000000004 RSI: ffffffff81fd26a6 RDI: ffff880032f9f7b1 RBP: ffff88002b4ebe98 R08: 0000000000001000 R09: 000000000000ffec R10: 0000000000000000 R11: 000000000000000f R12: ffff880004d9b6c0 R13: 7365725f6d706400 R14: ffff880004d9b6c0 R15: ffffffff82020570 FS: 0000000000000000(0000) GS:ffff88003aa00000(0063) knlGS:00000000f776bc40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000f6c02ff0 CR3: 000000002c2b3000 CR4: 00000000001007f0 Call Trace: [<ffffffff811dc076>] seq_read+0x2f6/0x3e0 [<ffffffff811b749b>] vfs_read+0x9b/0x160 [<ffffffff811b7f69>] SyS_read+0x49/0xb0 [<ffffffff81a3a4b9>] ia32_do_call+0x13/0x13 ---[ end trace 5bd9eb630614861e ]--- Kernel panic - not syncing: Fatal exception When the first time find_next calls find_next_mod_format, it should iterate the trace_bprintk_fmt_list to find the first print format of the module. However in current code, start_index is smaller than *pos at first, and code will not iterate the list. Latter container_of will get the wrong address with former v, which will cause mod_fmt be a meaningless object and so is the returned mod_fmt->fmt. This patch will fix it by correcting the start_index. After fixed, when the first time calls find_next_mod_format, start_index will be equal to *pos, and code will iterate the trace_bprintk_fmt_list to get the right module printk format, so is the returned mod_fmt->fmt. Link: http://lkml.kernel.org/r/5684B900.9000309@intel.com Cc: stable@vger.kernel.org # 3.12+ Fixes: 102c9323c35a8 "tracing: Add __tracepoint_string() to export string pointers" Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-01-04ftrace/scripts: Fix incorrect use of sprintf in recordmcountColin Ian King
Fix build warning: scripts/recordmcount.c:589:4: warning: format not a string literal and no format arguments [-Wformat-security] sprintf("%s: failed\n", file); Fixes: a50bd43935586 ("ftrace/scripts: Have recordmcount copy the object file") Link: http://lkml.kernel.org/r/1451516801-16951-1-git-send-email-colin.king@canonical.com Cc: Li Bin <huawei.libin@huawei.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org # 2.6.37+ Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-01-03Linux 4.4-rc8Linus Torvalds
2016-01-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS build fix from Ralf Baechle: "Fix a makefile issue resulting in build breakage with older binutils. This has sat in -next for a few days, testers and buildbot are happy with it, too though if you are going for another -rc that'd certainly help ironing out a few more issues" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: VDSO: Fix build error with binutils 2.24 and earlier
2016-01-03Merge tag 'drm-intel-fixes-2016-01-02' of ↵Linus Torvalds
git://anongit.freedesktop.org/drm-intel Pull i915 drm fixes from Jani Nikula: "Two display fixes still for v4.4. The new year's resolution is to start using signed tags per Linus' request. This one is still unsigned; I want to fix this up in our maintainer scripts instead of doing it one-off" * tag 'drm-intel-fixes-2016-01-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: increase the tries for HDMI hotplug live status checking drm/i915: Unbreak check_digital_port_conflicts()
2015-12-31Merge tag 'pci-v4.4-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI bugfix from Bjorn Helgaas: "Here's another fix for v4.4. This fixes 32-bit config reads for the HiSilicon driver. Obviously the driver is completely broken without this fix (apparently it actually was tested internally, but got broken somehow in the process of upstreaming it). Summary: HiSilicon host bridge driver Fix 32-bit config reads (Dongdong Liu)" * tag 'pci-v4.4-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: hisi: Fix hisi_pcie_cfg_read() 32-bit reads
2015-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Just some missing syscall wire ups" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Wire up mlock2 system call. sparc: Add all necessary direct socket system calls.
2015-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Prevent XFRM per-cpu counter updates for one namespace from being applied to another namespace. Fix from DanS treetman. 2) Fix RCU de-reference in iwl_mvm_get_key_sta_id(), from Johannes Berg. 3) Remove ethernet header assumption in nft_do_chain_netdev(), from Pablo Neira Ayuso. 4) Fix cpsw PHY ident with multiple slaves and fixed-phy, from Pascal Speck. 5) Fix use after free in sixpack_close and mkiss_close. 6) Fix VXLAN fw assertion on bnx2x, from Yuval Mintz. 7) natsemi doesn't check for DMA mapping errors, from Alexey Khoroshilov. 8) Fix inverted test in ip6addrlbl_get(), from ANdrey Ryabinin. 9) Missing initialization of needed_headroom in geneve tunnel driver, from Paolo Abeni. 10) Fix conntrack template leak in openvswitch, from Joe Stringer. 11) Mission initialization of wq->flags in sock_alloc_inode(), from Nicolai Stange. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close net, socket, socket_wq: fix missing initialization of flags drivers: net: cpsw: fix error return code openvswitch: Fix template leak in error cases. sctp: label accepted/peeled off sockets sctp: use GFP_USER for user-controlled kmalloc qlcnic: fix a loop exit condition better net: cdc_ncm: avoid changing RX/TX buffers on MTU changes geneve: initialize needed_headroom ipv6: honor ifindex in case we receive ll addresses in router advertisements addrconf: always initialize sysctl table data ipv6/addrlabel: fix ip6addrlbl_get() switchdev: bridge: Pass ageing time as clock_t instead of jiffies sh_eth: fix 16-bit descriptor field access endianness too veth: don’t modify ip_summed; doing so treats packets with bad checksums as good. net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband Card net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband Card natsemi: add checks for dma mapping errors rhashtable: Kill harmless RCU warning in rhashtable_walk_init openvswitch: correct encoding of set tunnel action attributes ...
generated by cgit v0.10.2 at 2024-11-11 20:49:59 (GMT)