summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-06mac80211_hwsim: add testmode code to stop/wake queuesJohannes Berg
This was useful for debugging the queue stop/wake issues and is pretty small so let's just put it in. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-06mac80211: fix crash with single-queue driversJohannes Berg
Larry (and some others I think) reported that with single-queue drivers mac80211 crashes when waking the queues. This happens because we allocate just a single queue for each virtual interface in case the driver doesn't have at least 4 queues, but the code stopping/waking the virtual interface queues wasn't taking this into account. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-06mac80211: always set in_reconfig=false on wakeupEliad Peller
If the interfaces were removed just before a restart work was started, open_count will be 0, and most of the reconfig work will be skipped, including the resetting of local->in_reconfig to false. Leaving local->inconfig = true will result in dropping any incoming packet. Fix it by always setting local->in_reconfig = false (even if there are no active interfaces). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-06mac80211: fix debugfs default key linksJohannes Berg
Due to the way the default key links are created, it happens that a link is left dangling: * both unicast/multicast links are created * unicast link is destroyed, and the links are updated * during this update, adding the multicast link again fails because it is present, destroying the debugfs pointer * removing the multicast link won't work as the pointer has been destroyed Fix this by always removing the links and then re-creating them if needed. Reported-by: Marek Lindner <lindner_marek@yahoo.de> Reported-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-05cfg80211: bitrate calculation for 60gVladimir Kondratiev
60g band uses different from .11n MCS scheme, so bitrate should be calculated differently Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-05{nl,cfg}80211: support high bitratesVladimir Kondratiev
Until now, a u16 value was used to represent bitrate value. With VHT bitrates this becomes too small. Introduce a new 32-bit bitrate attribute. nl80211 will report both the new and the old attribute, unless the bitrate doesn't fit into the old u16 attribute in which case only the new one will be reported. User space tools encouraged to prefer the 32-bit attribute, if available (since it won't be available on older kernels.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [reword commit message and comments a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-04cfg80211: fix locking regression in monitor channel trackingJohannes Berg
Michal's monitor channel tracking introduce a locking problem as it locked the rdev lock inside the netdev notifier which isn't allowed as we might already hold it if we get there by removing an interface that is up. Fix this by relying only on the RTNL to protect the interface counters, the RTNL is always held in these code paths anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-03mac80211: add TX prepare APIJohannes Berg
Some drivers require setup before being able to send management frames in managed mode, in particular in multi-channel cases. Introduce API to allow the drivers to do such setup while being able to sleep waiting for the setup to finish in the device. This isn't possible inside the TX call since that can't sleep. A future patch may also restructure the TX retry to wait for the driver to report the frame status, as suggested by Arik in http://mid.gmane.org/CA+XVXffKSEL6ZQPQ98x-zO-NL2=TNF1uN==mprRyUmAaRn254g@mail.gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-03mac80211_hwsim: fix NUM_BANDS usageJohannes Berg
Due to the recent change of NUM_BANDS from 2 to 3 hwsim broke. Fix the code by using the right constant but don't support bands other than 2.4 and 5 GHz. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-03mac80211: reduce IEEE80211_TX_MAX_RATESThomas Huehn
IEEE80211_TX_MAX_RATES can be reduced from 5 to 4 as there is no current hardware supporting a rate chain with 5 multi rate stages (mrr), so 4 mrr stages are sufficient. The memory that is freed within the ieee80211_tx_info struct will be used in the upcoming Transmission Power Control (TPC) implementation. Suggested-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02mac80211: remove tx_frags driver callbackJohannes Berg
The implementation of tx_frags is buggy due to not handling queue stop, and there's no driver implementing it so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02mac80211: include VHT capability IE in probe requestsMahesh Palivela
Insert the VHT capability IE into probe requests. Signed-off-by: Mahesh Palivela <maheshp@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02wireless: 60g protocol constantsVladimir Kondratiev
Provide various constants as defined by the 802.11ad: frame types, IE's, capability bits, action categories Introduce GCMP cipher, mandatory by 802.11ad Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02wireless: regulatory for 60gVladimir Kondratiev
Add regulatory rule for the 60g band Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02cfg80211: add 802.11ad (60gHz band) supportVladimir Kondratiev
Add enumerations for both cfg80211 and nl80211. This expands wiphy.bands etc. arrays. Extend channel <-> frequency translation to cover 60g band and modify the rate check logic since there are no legacy mandatory rates (only MCS is used.) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02mac80211: allow calling ieee80211_ap_probereq_get() during auth/assocEliad Peller
Drivers might need getting the probe request (e.g. in order to extract the ssid) even during auth/assoc. Make ieee80211_ap_probereq_get() support it by considering auth_data/assoc_data as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: respect iface combinations when starting operationMichal Kazior
devlist_mtx locking is changed to accomodate changes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: add channel checking for iface combinationsMichal Kazior
.connect cannot be handled since the driver scans and connects on its own. It is up to the driver then to refuse a connection (with -EBUSY for example). Non-fixed channel IBSSes always take a single channel resource. For example two non-fixed channel IBSSes always take up 2 num_different_channels, even if they operate on the same channel at a given point of time. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211/mac80211: remove .get_channelMichal Kazior
We do not need it anymore since cfg80211 tracks monitor channel and monitor channel type. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: set initial monitor channelMichal Kazior
Implements behaviour seen in mac80211. A running monitor always has a channel - even before .set_channel. This way we won't break current behaviour. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: track monitor channelMichal Kazior
Make it even more obvious we support single monitor channel. This will allow us to remove .get_channel. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: refuse to .set_monitor_channel when non-monitors are presentMichal Kazior
Having .set_monitor_channel work with non-monitor interfaces running would make interface combinations accounting ambiguous. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29mac80211: refactor virtual monitor codeMichal Kazior
Use cfg80211 the new .set_monitor_enabled instead of tracking it inside mac80211. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: track monitor interfaces countMichal Kazior
Implements .set_monitor_enabled(wiphy, enabled). Notifies driver upon change of interface layout. If only monitor interfaces become present it is called with 2nd argument being true. If non-monitor interface appears then 2nd argument is false. Driver is notified only upon change. This makes it more obvious about the fact that cfg80211 supports single monitor channel. Once we implement multi-channel we don't want to allow setting monitor channel while other interface types are running. Otherwise it would be ambiguous once we start considering num_different_channels. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: introduce cfg80211_get_chan_stateMichal Kazior
Helper function for finding out which channel is used by a given interface. An exclusive channel can be used only by a single interface. This is mainly for non-fixed channel IBSS handling. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: track ibss fixed channelMichal Kazior
IBSS may hop between channels. It is necessary to account this special case when considering interface combinations. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: add channel tracking for AP and meshMichal Kazior
We need to know which channel is used by a running AP and mesh for channel context accounting and finding matching/active interface combination. STA/IBSS have current_bss already which allows us to check which channel a vif is tuned to. Non-fixed channel IBSS can be handled with additional changes. Monitor mode is going to be handled differently. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: .stop_ap when interface is going downMichal Kazior
We'll need this for proper channel tracking (which is going to be needed for channel context accounting and finding matching/active interface combination). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: introduce cfg80211_stop_apMichal Kazior
This functionality will be reused when interface is going down. Avoids code duplication. Also adds missing wdev locking. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-28Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg
2012-06-28cfg80211: allow advertising VHT capabilitiesMahesh Palivela
Allow drivers to advertise their VHT capabilities and export them to userspace via nl80211. Signed-off-by: Mahesh Palivela <maheshp@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-28wireless: add VHT (802.11ac) definitionsMahesh Palivela
Add the VHT definitions to be used by drivers supporting it. Signed-off-by: Mahesh Palivela <maheshp@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-28mac80211: don't require associated->beacon_ies for psEliad Peller
beacon_ies is needed only in order to extract the dtim period. However, even if it's missing we can still enter ps with dtim=1 (which also happens if the TIM ie is invalid). Most drivers don't use conf.max_sleep_period/ps_dtim_period anyway, and this check prevents them from entering ps if they don't have beacon (but only probe response), even though the beacon is not needed at all. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-28mac80211: flush queues before deauth/disassocEliad Peller
On deauth/disassoc we tear down all BA sessions. These DELBA packets are sent on the appropriate TID, while deauth/disassoc is always sent on VO. This sometimes ends with the DELBA being sent after the deauth was already sent. Fix it by flushing all the pending frames before sending deauth/disassoc. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-28mac80211: don't expose ieee80211_add_srates_ie()Johannes Berg
This and ieee80211_add_ext_srates_ie() aren't exported, so can't be used by drivers anyway, but there's also no reason that they should be so make them private to mac80211 and use sdata instead of vif arguments. Acked-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-27ath9k: Fix compilation breakageSujith Manoharan
Wrap the MCI-work canceling with CONFIG_ATH9K_BTCOEX_SUPPORT. Reported-by: Emmanuel Benisty <benisty.e@gmail.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27brcmfmac: fix sparse warning introduced with checkdied patchArend van Spriel
The commit "brcmfmac: introduce checkdied debugfs functionality" also introduced a sparse warning: ..../brcmfmac/dhd_sdio.c:3147:45: sparse: cast to restricted __le32 This patch fixes this sparse warning. Reported-by: Fengguang Wu <wfg@linux.intel.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27brcmfmac: add BCM4334 supportFranky Lin
BCM4334 is a dualband a/b/g/n WiFi chip support 20MHz/40MHz channels. This patch adds support for its SDIO interface. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27brcmfmac: reduce allocations needed during nvram data downloadArend van Spriel
The nvram data is preprocessed before being sent to the device and just before sending an additional allocation was done that assured word alignment of the data. This has moved to the preprocessing step to reduce allocations and subsequent copying of the nvram data. Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27brcmfmac: use firmware data buffer directly for nvramFranky Lin
The nvram file could be parsed directly in the data buffer in the firmware structure passed by request_firmware function. This patch gets rid of the redundant memcpy. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27brcmfmac: move glom alignment setting to SDIO bus layerFranky Lin
txglomming alignment is a SDIO bus specific feature. It is more appropriate to place it in SDIO bus layer instead of common layer. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27brcmfmac: restrict dongle txglom disable to old SDIO coreFranky Lin
txglomming is a firmware feature for sdio bus interface. For SDIO device cores newer than revision 11, the default setting of firmware should be used instead of disabling it from the host side. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27brcmfmac: add support for bus specific data commandFranky Lin
brcmfmac need to support data command setting for dongle's bus core. A list must be placed at brcmf_bus structure before calling brcmf_bus_start in order to be sent by brcmf_c_preinit_dcmds. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27bcma: define some additional cores IDsRafał Miłecki
Some of them are BCM4706 specific AFAWK. Most of them was confirmed on Netgear WNDR450. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-27cfg80211: don't allow WoWLAN support without CONFIG_PMJohannes Berg
When CONFIG_PM is disabled, no device can possibly support WoWLAN since it can't go to sleep to start with. Due to this, mac80211 had even rejected the hardware registration. By making all the code and data for WoWLAN depend on CONFIG_PM we can promote this runtime error to a compile-time error. Add #ifdef around all WoWLAN code to remove it in systems that don't need it as they never suspend. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-26Merge branch 'wl12xx-next' into for-linvilleLuciano Coelho
2012-06-26ath9k_htc: Fix IDLE power saveSujith Manoharan
Remove the radio enable/disable stuff and fix the transition to FULL_SLEEP mode when the device is idle. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-26ath9k_htc: Use atomic operations for op_flagsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-26ath9k_htc: Change default listen interval to 1Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-26ath9k: Fix lockdep splatSujith Manoharan
Cancel the MCI work only when MCI is actually enabled. Fixes this: [96833.124051] Call Trace: [96833.124060] [<ffffffff810afaf8>] __lock_acquire+0x1518/0x1e40 [96833.124065] [<ffffffff810ad126>] ? mark_held_locks+0x86/0x110 [96833.124069] [<ffffffff810ad3ad>] ? trace_hardirqs_on+0xd/0x10 [96833.124073] [<ffffffff814464f0>] ? _raw_spin_unlock_irq+0x30/0x70 [96833.124078] [<ffffffff81072968>] ? wait_on_cpu_work+0x98/0xc0 [96833.124082] [<ffffffff810b0a11>] lock_acquire+0xa1/0x150 [96833.124085] [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0 [96833.124088] [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0 [96833.124092] [<ffffffff810729e2>] wait_on_work+0x52/0x120 [96833.124095] [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0 [96833.124099] [<ffffffff81063b3f>] ? del_timer+0x7f/0x110 [96833.124102] [<ffffffff81072c13>] __cancel_work_timer+0x83/0x130 [96833.124106] [<ffffffff81072cf0>] cancel_work_sync+0x10/0x20 [96833.124113] [<ffffffffa065b5cd>] __ath_cancel_work+0x4d/0x60 [ath9k] [96833.124119] [<ffffffffa065cf28>] ath9k_config+0x458/0x680 [ath9k] [96833.124125] [<ffffffffa065dd1e>] ? ath9k_flush+0x6e/0x1d0 [ath9k] [96833.124129] [<ffffffff8144394d>] ? __mutex_unlock_slowpath+0x10d/0x190 [96833.124146] [<ffffffffa056c7b5>] ieee80211_hw_config+0x135/0x2a0 [mac80211] [96833.124163] [<ffffffffa057ebbb>] ieee80211_do_open+0x67b/0xc50 [mac80211] [96833.124178] [<ffffffffa057f1fd>] ieee80211_open+0x6d/0x80 [mac80211] [96833.124183] [<ffffffff8137a44f>] __dev_open+0x9f/0xf0 [96833.124187] [<ffffffff8137a701>] __dev_change_flags+0xa1/0x180 [96833.124190] [<ffffffff8137a898>] dev_change_flags+0x28/0x70 [96833.124195] [<ffffffff813e1179>] devinet_ioctl+0x659/0x780 [96833.124199] [<ffffffff8137aea0>] ? dev_ioctl+0x210/0x6d0 [96833.124203] [<ffffffff813e1db5>] inet_ioctl+0x75/0x90 [96833.124208] [<ffffffff8135e0e0>] sock_do_ioctl+0x30/0x70 [96833.124211] [<ffffffff8135e3dd>] sock_ioctl+0x7d/0x2c0 [96833.124218] [<ffffffff81193c39>] do_vfs_ioctl+0x99/0x580 [96833.124222] [<ffffffff81447415>] ? sysret_check+0x22/0x5d [96833.124226] [<ffffffff811941b9>] sys_ioctl+0x99/0xa0 [96833.124230] [<ffffffff814473e9>] system_call_fastpath+0x16/0x1b Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-09-23 07:21:13 (GMT)