summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-13V4L/DVB (9173): S2API: Remove the hardcoded command limit during validationSteven Toth
This means that when developers add new commands then they'll be see the DTV_MAX_COMMAND define and will be more likely to modify it, without having to modify the command validation code. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the ↵Darron Broad
legacy API. Fixes switching from S2API to legacy where legacy params given to S2API aware demods are cached ones and not those implied in the legacy API. It was found (on an S2API aware demod at least) that after using an S2API aware application and then switching to a legacy application that prior S2API params were in effect were legacy has only implied values. This fixes this. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API.Darron Broad
Quick fix to stop an OOPS if illegal commands are dumped in S2API. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the ↵Darron Broad
cx24116 demod. Add some sanity checking to data input via S2API to the cx24116 demod. This patch is valid for both s2-mfe and s2. It was found when testing KAFFEINE with S2API support that invalid modulation modes amongst other parameters were being delivered to the demod. In order to debug this sanity checking has been added. An example session would involve kaffeine setting QAM_AUTO when querying DVB-T, then later when trying to tune to DVB-S this cached value would be presented in error. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams.Laurent Pinchart
This adds required quirks for the Compaq Presario B1200 and Acer Travelmate 7720 integrated webcams. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9168): Add support for MSI TV@nywhere Plus remoteBrian Rogers
The IR controller has a couple quirks. It won't respond until some other device on the bus is probed. To work around that, probe 0x50 first. Then, since it won't respond to a zero-byte read, probe with a one-byte read. Signed-off-by: Brian Rogers <brian_rogers@comcast.net> [mchehab.redhat.com: Fix merge conflicts and remove an unused var] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB: v4l2-dev: remove duplicated #includeHuang Weiyi
Removed duplicated include "media/cx2341x.h" in drivers/media/video/cx23885/cx23885-417.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9166): ivtv - Fix potential race condition in yuv handlerIan Armstrong
Modified yuv register update handling to remove a potential race condition which could occur with the first video frame. Also removed a forced yuv position update, since changing the source video dimensions or interlace settings doesn't affect the frame already being displayed. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9165): ivtv: V4L2_FBUF_FLAG_OVERLAY status fixIan Armstrong
When the framebuffer format was queried via VIDIOC_G_FBUF, V4L2_FBUF_FLAG_OVERLAY would only be correctly returned for certain screen depths. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9164): ivtvfb: a small cosmetic changeIan Armstrong
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9163): ivtvfb: fix sparse warnings and improve write functionIan Armstrong
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9162): ivtv: fix raw/sliced VBI mixupHans Verkuil
The service_set field was used in saa7115 and cx25840 to determine whether raw or sliced VBI was desired. This is incorrect since it is perfectly valid to select sliced VBI with a service_set of 0. Instead these drivers should checked on VIDIOC_S_FMT whether the type field matches the raw or sliced VBI type. Updated ivtv accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9160): v4l: remove vidioc_enum_fmt_vbi_capHans Verkuil
Remove the vidioc_enum_fmt_vbi_cap ops: it was scheduled for removal in 2.6.28 since the v4l2 specification says that V4L2_BUF_TYPE_VBI_CAPTURE should not support VIDIOC_ENUM_FMT. It's also pretty pointless. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9159): saa5249: fix compile errorsHans Verkuil
Add missing include. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9157): cx18/ivtv: add 'PCI:' prefix to bus_info.Hans Verkuil
Suggested by Martin Dauskardt. This is conform what the other drivers do. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9155): em28xx-dvb: dvb_init() code factorizationThierry MERLE
In dvb_init(), case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_KWORLD_DVB_310U: can be put in the same case than EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 since they do the same thing. Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9152): radio-zoltrix: Add checking for frequencyAlexey Klimov
This patch adds printk messages, adds checking if frequency is set, adds return -EINVAL in right places in zoltrix-radio. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9151): dsbr100: Add returns and fix codingstyle for vidioc_s_ctrlAlexey Klimov
Added return -EBUSY and fixed codingstyle issue Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9149): hvr950q: led feedback based on snrMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9147): af9015: Add USB ID for MSI DIGIVOX mini IIIHerbert Graeber
- Add USB ID for MSI DIGIVOX mini III (1462:8807) Signed-off-by: Herbert Graeber <herbert@graeber-clan.de> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9146): af901x: fix some compiler errors and warningsAntti Palosaari
- cast firmware data to u8 - remove cpu_to_le16 from switch-case label Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9145): af901x: clean-upAntti Palosaari
- remove unnecessary #undef's Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9144): af9015: enable Maxlinear mxl5005s tuner RSSIAntti Palosaari
- enable Maxlinear mxl5005s tuner RSSI Thaks to Jose Alberto for finding this setting. Thanks-to: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9143): af9015: fix wrong GPIOAntti Palosaari
- fix wrong GPIO that causes 2nd FE not to work ater warmboot Thanks to Andrew Williams <andrew.williams@joratech.com> for reporting this. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9141): anysee: support for Anysee E30 Combo PlusAntti Palosaari
- add module parameter for selecting DVB-T / DVB-C mode Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9140): anysee: unlock I2C-mutex in error caseAntti Palosaari
- unlock I2C-mutex also in error case Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9129): zoran: move zoran sources into a zoran subdirectoryHans Verkuil
Prevent the zoran driver sources from cluttering the video directory. This changeset only moves the drivers and it does not fix any of the checkpatch warnings/errors to keep the changeset clean. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9135): cx88 Dvico FusionHDTV ProTim Farrington
Well, one thing you encouraged me to do was re-test some of my cards which contained the xc3028-zarlink combo. Which led me to test a Dvico FusionHDTV Pro. Almost a year ago, Chris Pascoe did a patch for this which can be found at his ~pascoe/xc-test at Linuxtv. This worked very well, however that was using his version of firmware. Alas, someone attempted to use this and patch v4l-dvb, and messed it up. So I've fixed it. I enclose the patch against today's tree (containing your latest tuner-xc2028.c patch). The card now works very well, well with DVB-T anyway. Signed-off-by: Tim Farrington <timf@iinet.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9133): v4l: disconnect kernel number from minorHans Verkuil
The v4l core creates four different video devices (video, vbi, radio, vtx) and each has its own range of minor numbers. However, modern devices keep increasing the number of devices that they need so a maximum of 64 video devices will not be enough in the future. In addition this scheme makes it very hard to add new device types. This patch disconnects the kernel number allocation (e.g. video0, video1, etc.) from the actual minor number (just pick the first free minor). This allows for much more flexibility in the future. However, it does require the use of udev. For those who cannot use udev a new CONFIG option was created that changes the allocation scheme back to the old behavior. Thanks to Greg KH for suggesting this approach during the 2008 LPC. In addition, several bugs were fixed in the ivtv and cx18 drivers: these drivers try to allocate specific kernel numbers but that scheme contained a bug which caused what should have been e.g. video17 to appear as e.g. video2. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9132): cx18: Fix warning message for DMA done notification for ↵Andy Walls
inactive stream. cx18: Fix warning message for DMA done notification for inactive stream. The warning message would always gripe that the radio stream was to blame, which was misleading and wrong (/dev/radioN nodes never transfer data). Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9131): cx18: Add entries for the Leadtek PVR2100 and Toshiba Qosmio ↵Andy Walls
DVB-T/Analog cx18: Add entries for the Leadtek PVR2100 and Toshiba Qosmio DVB-T/Analog capture cards. Both cards are hybrids cards, but no digital capture functionality has been added yet. These entries are a first guess at the card entries to get analog working, given the information available. Terry Wu <terrywu at leadtek.com.tw> provided a pointer to information for the PVR2100. Martin Juhl <mj at casalogic.dk>, an owner of the Toshiba DVB-T/Analog tuner card, provided the DDR timing information from his Windows inf file. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9126): gspca: Fix some compilation warnings in m5602.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9125): gspca: Big rewrite of t613 driverJean-Francois Moine
- separate functions for bridge and sensor exchanges - delays added after some exchanges - other sensor type Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9124): gspca: Bad name of the tv8532 subdriver in Kconfig.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9123): gspca: Add some lost controls to the s5k83a sensor.Erik Andren
Signed-off-by: Erik Andren <erik.andren@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9122): gspca: Bad name of the sunplus subdriver in Kconfig.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9121): gspca: Add the subdriver finepix in Kconfig and Makefile.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9120): gspca: sd_desc->start returns a value and static functions ↵Jean-Francois Moine
in m5602. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9119): gspca: Don't destroy the URBs on disconnect.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9118): gspca: Set the vertical flip at streamon time in sonixj.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9116): USB: remove info() macro from usb media driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Cc: Douglas Landgraf <dougsland@gmail.com> Cc: Mike Isely <isely@pobox.com> Cc: Thierry Merle <thierry.merle@free.fr> Cc: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9114): dib0700: fix bad assignment of dib0700_xc5000_tuner_callback ↵Devin Heitmueller
after return call Put callback definition before function return and cleanup callback: Fix a bug where the xc5000 callback was being set *after* the return call (essentially resulting in dead code). Also cleanup the callback function to detect unknown commands. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8904): cx88: add missing unlock_kernelHans Verkuil
sparse found an unbalanced BKL usage. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9113): saa7134: fixes for the Asus Tiger Revision 1.00Hermann Pitton
In opposite to the P7131 Dual this early OEM card has a male radio antenna connector and also no remote. We currently switch the DVB-T RF feed to the radio input, like on the P7131 with female radio connector used also for DVB-T and should improve this. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9111): cx18: Up the version to 1.0.1Andy Walls
cx18: Up the version to 1.0.1. This will make it easy to tell if retries of MMIO access are implemented or not in trouble reports. First course of action for I2C and other initialization problem reports will be to have user upgrade to v1.0.1 of driver. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9110): cx18: Add default behavior of checking and retrying PCI MMIO ↵Andy Walls
accesses cx18: Add default behavior of checking and retrying PCI MMIO accesses. The concept of checking and retrying PCI MMIO accesses for better reliability in older motherboards was suggested by Steve Toth <stoth@linuxtv.org>. This change implements MMIO retries and the retry_mmio module parameter that is enabled by default. Limited experiments have shown this is more reliable than the mmio_ndelay parameter. mmio_ndelay has insignificant effect with retries enabled. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9108): cinergyT2: add remote key repeat featureThierry MERLE
Implement key repeat feature for the cinergyT2 remote controller. Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9107): Alternative version of Terratec Cinergy T2 driverTomi Orava
Alternative version of the Terratec Cinergy T2 driver that uses the dvb framework. Signed-off-by: Tomi Orava <tomimo@ncircle.nullnet.fi> Signed-off-by: Thierry MERLE <thierry.merle@free.fr> [mchehab@redhat.com: fix dvb Makefile] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9105): correct Makefile symbol for stv0288 frontendJanne Grunau
Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9101): radio-mr800: Add driver for AverMedia MR 800 USB FM radio ↵Alexey Klimov
devices This patch creates a new usb-radio driver, radio-mr800.c, that supports the AverMedia MR 800 USB FM radio devices. This device plugs into both the USB and an analog audio input, so this thing only deals with initialization and frequency setting, the audio data has to be handled by a sound driver. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v0.10.2 at 2024-11-12 02:35:29 (GMT)