summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-01dmaengine: PL08x: use vchan's spinlockRussell King
Initialize the vchan struct, and use the provided spinlock rather than our own. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: convert to use virt-dma structsRussell King
Convert PL08x to use the virt-dma structures. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: rejig physical channel allocationRussell King
Rework the physical channel allocation mechanism to only allocate physical channels to virtual channels when they're about to be used. This eliminates all the complexity with holding channels while descriptors are being prepared, which is completely unnecessary. This also brings this driver to a state where the generic virtual DMA code can be used with this driver, and opens up the possibility of properly scheduling and prioritorising physical DMA channels to virtual DMA channels. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: start next descriptor from irq contextRussell King
Rather than waiting for the tasklet to run, we can start the next descriptor from interrupt context, as soon as we know that the previous descriptor has completed. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: split the pend_list in twoRussell King
Our behaviour wasn't correct; issue_pending is supposed to be called before any submitted descriptors are available for processing by the DMA engine. Split the pend_list in two, one for submitted descriptors and another list for issued descriptors. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: re-jig the starting of txdsRussell King
Rather than code the de-queue of the txd several times, move that into the start_txd function. Rename this to better illustrate what it's now doing, and call this function when starting a delayed memcpy(). Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: remove waiting descriptor pointerRussell King
As we no longer need to pass a descriptor to prep_phy_channel(), we don't need to keep track of the descriptor which is waiting for a channel to become available. So let's get rid of it. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: move DMA signal muxing into slave prepare codeRussell King
Move the DMA request muxing into the slave prepare code and txd release/completion code. This means we only hold the DMA request mux while there are descriptors waiting to be started or are in progress. This leaves txd->direction as a write-only variable; remove it. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: convert to a list of completed descriptorsRussell King
Convert PL08x to use a list of completed descriptors rather than merely relying upon a single pointer. This makes it possible to schedule the tasklet for other purposes, and makes our behaviour similar to virt-dma. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: track mux usage on a per-channel basis.Russell King
Keep track of the number of descriptors currently using a MUX setting on a per-channel basis. This allows us to know when we have descriptors queued somewhere which have been assigned a DMA request signal. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: move DMA signal muxing into pl08x_dma_chan structRussell King
Move the signal handling out of the physical channel structure into the virtual channel structure, where it should belong as it has more to do with the virtual channel than the physical one. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: split DMA signal muxing from channel allocRussell King
Split the DMA request mux signal handling from the physical channel allocation code. The physical channel has very little to do with the DMA request input which will be used, so these should be two separate operations. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: get rid of unnecessary checks in dma_slave_configRussell King
Get rid of the unnecessary checks in dma_slave_config utilizing the DMA direction. This allows us to move the computation of cctl to the prepare function. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: ignore 'direction' argument in dma_slave_configRussell King
Ignore the direction argument in dma_slave_config, and configure both directions independently. We still check that the configuration for the intended direction is valid; this check will eventually be dropped. This check is just for debugging at present. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: extract function to to generate cctl valuesRussell King
Extract the functionality from dma_slave_config to generate the cctl values for a given bus width and burst size. This allows us to use this elsewhere in the driver, namely the prepare functions. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: move the bus and increment selection to dma prepare functionRussell King
Move the bus and transfer increment selection to the DMA prepare function rather than the slave configuration function. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: get rid of device_fc in struct pl08x_dma_chanRussell King
As we now store the dma_slave_config in pl08x_dma_chan, we don't need to store this separately. Use the one in dma_slave_config directly. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: get src/dst addr direct from dma_slave_config structRussell King
Add a dma_slave_config struct to struct pl08x_dma_chan, and move the src_addr/dst_addr arguments into this struct. This is a step away from using the dma_slave_config's direction member. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: constify channel names and bus_id stringsRussell King
Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: move private data structures into amba-pl08x.cRussell King
Move the driver private data structures into the driver itself, rather than having them exposed to everyone in a header file. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01ARM: spear: update for PL08x dma engine changesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: clean up get_signal/put_signalRussell King
Try to avoid dereferencing the DMA engine's channel struct in these platform helpers; instead, pass a pointer to the channel data into get_signal(), and the returned signal number to put_signal(). Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: remove circular_buffer boolean from channel dataRussell King
Circular buffers are not handled in this way; we have a separate API call now to setup circular buffers. So lets not mislead people with this bool. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: remove redundant spinlockRussell King
The pl08x_driver_data spinlock is only ever initialized. Nothing else uses it. Let's get rid of it. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: fix missed dma_transfer_direction fixupRussell King
db8196df4 (dmaengine: move drivers to dma_transfer_direction) missed fixing up the "DMA_NONE" case. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: remove runtime PM supportRussell King
The runtime PM support conflicts with the generic AMBA bus PM, and also causes a potential deadlock with the PL011 driver as it results in interrupts being enabled beneath a spinlock. I don't presently see any solution to this other than by removing the runtime PM support entirely from the DMA engine driver. Alternative suggestions welcome. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: virt-dma: add support for cyclic DMA periodic callbacksRussell King
Add support for cyclic DMA's periodic callbacks. Drivers are expected to call vchan_cyclic_callback() when a period has completed, which will schedule the tasklet to make the callback into the driver. As callbacks are made from tasklet context, it is important to realise that we don't guarantee a callback for each completed period, but for N completed periods where N may be greater than one. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: virt-dma: vchan_find_desc()Russell King
Add a function to find a descriptor within the depths of the virtualized DMA channel support. Needed for tx_status functionality. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: split out virtual channel DMA support from sa11x0 driverRussell King
Split the virtual slave channel DMA support from the sa11x0 driver so this code can be shared with other slave DMA engine drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-30Linux 3.5-rc5Linus Torvalds
2012-06-30Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes. All are small, contained, targeted fixes for explicit problems -- mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and Samsung." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx6q: fix suspend regression caused by common clk migration ARM: OMAP4470: Fix OMAP4470 boot failure ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled ARM: shmobile: sh7372: bugfix: chclr_offset base ARM: shmobile: sh73a0: bugfix: SY-DMAC number ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
2012-06-30printk.c: fix kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in printk.c: use correct parameter name. Warning(kernel/printk.c:2429): No description found for parameter 'buf' Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-30linux/irq.h: fix kernel-doc warningRandy Dunlap
Fix kernel-doc warning. This struct member was removed in commit 875682648b89 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-30Merge branch 'v3.5-samsung-fixes-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
2012-06-30ARM: imx6q: fix suspend regression caused by common clk migrationShawn Guo
When moving to common clk framework, the imx6q clks rom and mmdc_ch1_axi get different on/off states than old clk driver, which breaks suspend function. There might be a better way to manage these clocks, but let's takes the old clk driver approach to fix the regression first. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-30Merge tag 'omap-fixes-for-v3.5-rc4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here's one more regression fix that I missed earlier, and a trivial fix to get omap4470 booting." * tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4470: Fix OMAP4470 boot failure ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
2012-06-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management patches from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: acpi_pad: fix power_saving thread deadlock ACPI video: Still use ACPI backlight control if _DOS doesn't exist ACPI, APEI, Avoid too much error reporting in runtime ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding ACPI: Remove one board specific WARN when ignoring timer overriding ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI ACPI sysfs.c strlen fix
2012-06-30Merge tag 'driver-core-3.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver Core fixes from Greg Kroah-Hartman: "Here is a number of printk() fixes, specifically a few reported by the crazy blog program that ships in SUSE releases (that's "boot log" and not "web log", it predates the general "blog" terminology by many years), and the restoration of the continuation line functionality reported by Stephen and others. Yes, the changes seem a bit big this late in the cycle, but I've been beating on them for a while now, and Stephen has even optimized it a bit, so all looks good to me. The other change in here is a Documentation update for the stable kernel rules describing how some distro patches should be backported, to hopefully drive a bit more response from the distros to the stable kernel releases. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: printk: Optimize if statement logic where newline exists printk: flush continuation lines immediately to console syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ Revert "printk: return -EINVAL if the message len is bigger than the buf size" printk: fix regression in SYSLOG_ACTION_CLEAR stable: Allow merging of backports for serious user-visible performance issues
2012-06-30Merge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', ↵Len Brown
'video-bugzilla-43168', 'bugzilla-40002' and 'bugfix-misc' into release bug fixes
2012-06-30acpi_pad: fix power_saving thread deadlockStuart Hayes
The acpi_pad driver can get stuck in destroy_power_saving_task() waiting for kthread_stop() to stop a power_saving thread. The problem is that the isolated_cpus_lock mutex is owned when destroy_power_saving_task() calls kthread_stop(), which waits for a power_saving thread to end, and the power_saving thread tries to acquire the isolated_cpus_lock when it calls round_robin_cpu(). This patch fixes the issue by making round_robin_cpu() use its own mutex. https://bugzilla.kernel.org/show_bug.cgi?id=42981 Cc: stable@vger.kernel.org Signed-off-by: Stuart Hayes <Stuart_Hayes@Dell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-30ACPI video: Still use ACPI backlight control if _DOS doesn't existZhang Rui
This fixes a regression in 3.4-rc1 caused by commit ea9f8856bd6d4ed45885b06a338f7362cd6c60e5 (ACPI video: Harden video bus adding.) Some platforms don't have _DOS control method, but the ACPI backlight still works. We should not invoke _DOS for these platforms. https://bugzilla.kernel.org/show_bug.cgi?id=43168 Cc: Igor Murzov <intergalactic.anonymous@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-30Merge tag 'pm-for-3.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael J. Wysocki: * Fix for a bug in async suspend error code path causing parents to wait forever for their children in case of a suspend error from Mandeep Singh Baines (-stable metarial). * Fix for a suspend regression related to earlier changes in the ACPI cpuidle driver from Deepthi Dharwar. * tag 'pm-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. PM / Sleep: Prevent waiting forever on asynchronous suspend after abort
2012-06-29printk: Optimize if statement logic where newline existsSteven Rostedt
In reviewing Kay's fix up patch: "printk: Have printk() never buffer its data", I found two if statements that could be combined and optimized. Put together the two 'cont.len && cont.owner == current' if statements into a single one, and check if we need to call cont_add(). This also removes the unneeded double cont_flush() calls. Link: http://lkml.kernel.org/r/1340869133.876.10.camel@mop Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-29Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a few powerpc fixes. Arguably some of this should have come to you earlier but I'm only just catching up after my medical leave. Mostly these fixes regressions, a couple are long standing bugs." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Fix software invalidate TCE powerpc: check_and_cede_processor() never cedes powerpc/ftrace: Do not trace restore_interrupts() powerpc: Fix Section mismatch warnings in prom_init.c ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt powerpc: Fix uninitialised error in numa.c powerpc: Fix BPF_JIT code to link with multiple TOCs
2012-06-29Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpufeature: Remove stray %s, add -w to mkcapflags.pl x86, cpufeature: Catch duplicate CPU feature strings x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERM x86: Fix kernel-doc warnings x86, compat: Use test_thread_flag(TIF_IA32) in compat signal delivery
2012-06-29Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull oprofile fixlet from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static array
2012-06-29Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fix from Ingo Molnar. Fixes a bug introduced in this merge window by commit b1420f1c ("Make rcu_barrier() less disruptive") * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Stop rcu_do_batch() from multiplexing the "count" variable
2012-06-29printk: flush continuation lines immediately to consoleKay Sievers
Continuation lines are buffered internally, intended to merge the chunked printk()s into a single record, and to isolate potentially racy continuation users from usual terminated line users. This though, has the effect that partial lines are not printed to the console in the moment they are emitted. In case the kernel crashes in the meantime, the potentially interesting printed information would never reach the consoles. Here we share the continuation buffer with the console copy logic, and partial lines are always immediately flushed to the available consoles. They are still buffered internally to improve the readability and integrity of the messages and minimize the amount of needed record headers to store. Signed-off-by: Kay Sievers <kay@vrfy.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-29powerpc/pseries: Fix software invalidate TCEMichael Neuling
The following added support for powernv but broke pseries/BML: 1f1616e powerpc/powernv: Add TCE SW invalidation support TCE_PCI_SW_INVAL was split into FREE and CREATE flags but the tests in the pseries code were not updated to reflect this. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: stable@kernel.org [v3.3+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-29powerpc: check_and_cede_processor() never cedesAnton Blanchard
Commit f948501b36c6 ("Make hard_irq_disable() actually hard-disable interrupts") caused check_and_cede_processor to stop working. ->irq_happened will never be zero right after a hard_irq_disable so the compiler removes the call to cede_processor completely. The bug was introduced back in the lazy interrupt handling rework of 3.4 but was hidden until recently because hard_irq_disable did nothing. This issue will eventually appear in 3.4 stable since the hard_irq_disable fix is marked stable, so mark this one for stable too. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v0.10.2 at 2024-09-03 00:36:20 (GMT)