summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-16drm/amdgpu: use post-decrement in error handlingRasmus Villemoes
We need to use post-decrement to get the pci_map_page undone also for i==0, and to avoid some very unpleasant behaviour if pci_map_page failed already at i==0. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-14Merge tag 'drm-intel-fixes-2016-02-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes i915 display fixes mostly. * tag 'drm-intel-fixes-2016-02-12' of git://anongit.freedesktop.org/drm-intel: drm/i915: fix error path in intel_setup_gmbus() drm/i915/skl: Fix typo in DPLL_CFGCR1 definition drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select() drm/i915: Pretend cursor is always on for ILK-style WM calculations (v2) drm/i915/dp: reduce missing TPS3 support errors to debug logging drm/i915/dp: abstract training pattern selection drm/i915/dsi: skip gpio element execution when not supported drm/i915/dsi: don't pass arbitrary data to sideband drm/i915/dsi: defend gpio table against out of bounds access drm/i915/bxt: Don't save/restore eDP panel power during suspend (v3) drm/i915: Allow i915_gem_object_get_page() on userptr as well
2016-02-10Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes radeon and amdgpu fixes for 4.5. Highlights: - powerplay fixes for amdgpu - race fixes in the sub-allocator in radeon and amdgpu - hibernate fix for amdgpu - fix a possible circular locking in userptr handling in amdgpu * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amdgpu: fix issue with overlapping userptrs drm/radeon: hold reference to fences in radeon_sa_bo_new drm/amdgpu: remove unnecessary forward declaration drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2) drm/amdgpu: fix s4 resume drm/amdgpu/cz: plumb pg flags through to powerplay drm/amdgpu/tonga: plumb pg flags through to powerplay drma/dmgpu: move cg and pg flags into shared headers drm/amdgpu: remove unused cg defines drm/amdgpu: add a cgs interface to fetch cg and pg flags drm/amd/powerplay/tonga: disable vce pg drm/amd/powerplay/tonga: disable uvd pg drm/amd/powerplay/cz: disable vce pg drm/amd/powerplay/cz: disable uvd pg drm/amdgpu: be consistent with uvd cg flags drm/amdgpu: clean up vce pg flags for cz/st drm/amdgpu: handle vce pg flags properly drm/amdgpu: handle uvd pg flags properly drm/amdgpu/dpm/ci: switch over to the common pcie caps interface drm/amdgpu/cik: don't mess with aspm if gpu is root bus ...
2016-02-10drm/amdgpu: fix issue with overlapping userptrsChristian König
Otherwise we could try to evict overlapping userptr BOs in get_user_pages(), leading to a possible circular locking dependency. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-10drm/radeon: hold reference to fences in radeon_sa_bo_newNicolai Hähnle
An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2016-02-10drm/amdgpu: remove unnecessary forward declarationNicolai Hähnle
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2016-02-10drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)Nicolai Hähnle
An arbitrary amount of time can pass between spin_unlock and fence_wait_any_timeout, so we need to ensure that nobody frees the fences from under us. A stress test (rapidly starting and killing hundreds of glxgears instances) ran into a deadlock in fence_wait_any_timeout after about an hour, and this race condition appears to be a plausible cause. v2: agd: rebase on upstream Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2016-02-10drm/amdgpu: fix s4 resumeFlora Cui
No need to re-init asic if it's already been initialized. Skip IB tests since kernel processes are frozen in thaw. Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-02-10drm/i915: fix error path in intel_setup_gmbus()Rasmus Villemoes
This fails to undo the setup for pin==0; moreover, something interesting happens if the setup failed already at pin==0. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Fixes: f899fc64cda8 ("drm/i915: use GMBUS to manage i2c links") Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-3-git-send-email-linux@rasmusvillemoes.dk (cherry picked from commit 2417c8c03f508841b85bf61acc91836b7b0e2560) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-10drm/i915/skl: Fix typo in DPLL_CFGCR1 definitionLyude
We accidentally point both cfgcr registers for the second shared DPLL to the same location in i915_reg.h. This results in a lot of hw pipe state mismatches whenever we try to do a modeset that requires allocating the DPLL to a CRTC: [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x80000168, found 0x000004a5) [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 108000, found 49500) [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 108000, found 49500) This usually ends up causing blank monitors, since the DPLL never can get set to the right clock. Fixes: 086f8e84a085 ("drm/i915: Prefix raw register defines with underscore") Signed-off-by: Lyude <cpaul@redhat.com> Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1454600601-21900-1-git-send-email-cpaul@redhat.com (cherry picked from commit da3b891b0fb88605bb2d16adaf1ef2a1f16403ba) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-10drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select()Lyude
We don't actually check for INTEL_OUTPUT_DP_MST at all in here, as a result we skip assigning a DPLL to any DP MST ports, which makes link training fail: [ 1442.933896] [drm:intel_power_well_enable] enabling DDI D power well [ 1442.933905] [drm:skl_set_power_well] Enabling DDI D power well [ 1442.933957] [drm:intel_mst_pre_enable_dp] 0 [ 1442.935474] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 1442.935477] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1442.935480] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1442.936190] [drm:intel_dp_set_signal_levels] Using signal levels 05000000 [ 1442.936193] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 1442.936195] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1442.936858] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1442.936862] [drm:intel_dp_set_signal_levels] Using vswing level 2 … [ 1442.998253] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up [ 1442.998512] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting After which the pipe state goes completely out of sync: [ 70.075596] [drm:check_crtc_state] [CRTC:25] [ 70.075696] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ddi_pll_sel (expected 0x00000000, found 0x00000001) [ 70.075747] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in shared_dpll (expected -1, found 0) [ 70.075798] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000021) [ 70.075840] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x80400173) [ 70.075884] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr2 (expected 0x00000000, found 0x000003a5) [ 70.075954] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 262750, found 72256) [ 70.075999] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 540000, found 148500) And if you're especially lucky, it keeps going downhill: [ 83.309256] Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler [ 83.309265] [ 83.309265] ================================= [ 83.309266] [ INFO: inconsistent lock state ] [ 83.309267] 4.5.0-rc1Lyude-Test #265 Not tainted [ 83.309267] --------------------------------- [ 83.309268] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 83.309270] Xorg/1194 [HC0[1]:SC0[0]:HE1:SE1] takes: [ 83.309293] (&(&dev_priv->uncore.lock)->rlock){?.-...}, at: [<ffffffffa02a6073>] gen9_write32+0x63/0x400 [i915] [ 83.309293] {IN-HARDIRQ-W} state was registered at: [ 83.309297] [<ffffffff810e84f4>] __lock_acquire+0x9c4/0x1d00 [ 83.309299] [<ffffffff810ea1be>] lock_acquire+0xce/0x1c0 [ 83.309302] [<ffffffff8177d936>] _raw_spin_lock_irqsave+0x56/0x90 [ 83.309321] [<ffffffffa02a5492>] gen9_read32+0x52/0x3d0 [i915] [ 83.309332] [<ffffffffa024beea>] gen8_irq_handler+0x27a/0x6a0 [i915] [ 83.309337] [<ffffffff810fdbc1>] handle_irq_event_percpu+0x41/0x300 [ 83.309339] [<ffffffff810fdeb9>] handle_irq_event+0x39/0x60 [ 83.309341] [<ffffffff811010b4>] handle_edge_irq+0x74/0x130 [ 83.309344] [<ffffffff81009073>] handle_irq+0x73/0x120 [ 83.309346] [<ffffffff817805f1>] do_IRQ+0x61/0x120 [ 83.309348] [<ffffffff8177e6d6>] ret_from_intr+0x0/0x20 [ 83.309351] [<ffffffff815f5105>] cpuidle_enter_state+0x105/0x330 [ 83.309353] [<ffffffff815f5367>] cpuidle_enter+0x17/0x20 [ 83.309356] [<ffffffff810dbe1a>] call_cpuidle+0x2a/0x50 [ 83.309358] [<ffffffff810dc1dd>] cpu_startup_entry+0x26d/0x3a0 [ 83.309360] [<ffffffff817701da>] rest_init+0x13a/0x140 [ 83.309363] [<ffffffff81f2af8e>] start_kernel+0x475/0x482 [ 83.309365] [<ffffffff81f2a315>] x86_64_start_reservations+0x2a/0x2c [ 83.309367] [<ffffffff81f2a452>] x86_64_start_kernel+0x13b/0x14a Fixes: 82d354370189 ("drm/i915/skl: Implementation of SKL DPLL programming") Signed-off-by: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1454428183-994-1-git-send-email-cpaul@redhat.com (cherry picked from commit 78385cb398748debb7ea2e36d6d2001830c172bc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-09drm/i915: Pretend cursor is always on for ILK-style WM calculations (v2)Matt Roper
Due to our lack of two-step watermark programming, our driver has historically pretended that the cursor plane is always on for the purpose of watermark calculations; this helps avoid serious flickering when the cursor turns off/on (e.g., when the user moves the mouse pointer to a different screen). That workaround was accidentally dropped as we started working toward atomic watermark updates. Since we still aren't quite there yet with two-stage updates, we need to resurrect the workaround and treat the cursor as always active. v2: Tweak cursor width calculations slightly to more closely match the logic we used before the atomic overhaul began. (Ville) Cc: simdev11@outlook.com Cc: manfred.kitzbichler@gmail.com Cc: drm-intel-fixes@lists.freedesktop.org Reported-by: simdev11@outlook.com Reported-by: manfred.kitzbichler@gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93892 Fixes: 43d59eda1 ("drm/i915: Eliminate usage of plane_wm_parameters from ILK-style WM code (v2)") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454479611-6804-1-git-send-email-matthew.d.roper@intel.com (cherry picked from commit b2435692dbb709d4c8ff3b2f2815c9b8423b72bb) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454958328-30129-1-git-send-email-matthew.d.roper@intel.com
2016-02-08drm/amdgpu/cz: plumb pg flags through to powerplayAlex Deucher
Enable vce and uvd pg based on single set of pg flags. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amdgpu/tonga: plumb pg flags through to powerplayAlex Deucher
Enable vce and uvd pg based on single set of pg flags. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drma/dmgpu: move cg and pg flags into shared headersAlex Deucher
So they can be used by powerplay. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amdgpu: remove unused cg definesAlex Deucher
Leftover from radeon. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amdgpu: add a cgs interface to fetch cg and pg flagsAlex Deucher
Needed to pass the cg and pg info to powerplay. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amd/powerplay/tonga: disable vce pgAlex Deucher
Not working reliably yet. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amd/powerplay/tonga: disable uvd pgAlex Deucher
Not working reliably yet. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amd/powerplay/cz: disable vce pgAlex Deucher
Not working reliably yet. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amd/powerplay/cz: disable uvd pgAlex Deucher
Not working reliably yet. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amdgpu: be consistent with uvd cg flagsAlex Deucher
Don't do anything if the uvd cg flags are not set. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amdgpu: clean up vce pg flags for cz/stAlex Deucher
It was already disabled elsewhere, make it offical. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amdgpu: handle vce pg flags properlyAlex Deucher
Don't attempt to start/stop the vce block if pg is disabled. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amdgpu: handle uvd pg flags properlyAlex Deucher
Don't attempt to start/stop the uvd block if pg is disabled. Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amdgpu/dpm/ci: switch over to the common pcie caps interfaceAlex Deucher
We already query this at driver init, so use that info. Also handles virtualization cases. Reviewed-by: monk liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amdgpu/cik: don't mess with aspm if gpu is root busAlex Deucher
Pcie registers may not be available in a virtualized environment. Reviewed-by: monk liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/amdgpu: add pcie cap module parameters (v2)Alex Deucher
Allows the user to force the supported pcie gen and lane config on both the asic and the chipset. Useful for debugging pcie problems and for virtualization where we may not be able to query the pcie bridge caps. Default to: gen: chipset 1/2, asic 1/2/3 lanes: 1/2/4/8/16 v2: fix bare metal case Reviewed-by: monk liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-08drm/i915/dp: reduce missing TPS3 support errors to debug loggingJani Nikula
Per spec, TPS3 support is mandatory for downstream devices that support HBR2. We've therefore logged errors on HBR2 without TPS3 since commit 1da7d7131c35cde83f1bab8ec732b57b69bef814 Author: Jani Nikula <jani.nikula@intel.com> Date: Thu Sep 3 11:16:08 2015 +0300 drm/i915: ignore link rate in TPS3 selection However, it seems there are real world devices out there that just aren't spec compliant, and still work at HBR2 using TPS2. So reduce the error message to debug logging. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92932 Fixes: 1da7d7131c35 ("drm/i915: ignore link rate in TPS3 selection") Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454667370-8001-2-git-send-email-jani.nikula@intel.com (cherry picked from commit bfcef5d2135ea1200ac1ea44661619ab8785c9f0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-08drm/i915/dp: abstract training pattern selectionJani Nikula
Make it cleaner to add more checks in the function. No functional changes. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org # dependency on the next patch Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454667370-8001-1-git-send-email-jani.nikula@intel.com (cherry picked from commit 23a5110dc619073b57d90c36eae383f51df03aac) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-08drm/i915/dsi: skip gpio element execution when not supportedJani Nikula
Skip v3 gpio element because the support is not there, and skip gpio element on non-vlv because the sideband code is vlv specific. v2: the gpio stuff is currently only supported on vlv (Ville) Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 2a33d93486f2 ("drm/i915/bios: add support for MIPI sequence block v3") Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454604767-2440-1-git-send-email-jani.nikula@intel.com (cherry picked from commit 96afef1d5adee8722549c8c2b788d656ea2ecf21) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-08drm/i915/dsi: don't pass arbitrary data to sidebandJani Nikula
Since sequence block v2 the second byte contains flags other than just pull up/down. Don't pass arbitrary data to the sideband interface. The rest may or may not work for sequence block v2, but there should be no harm done. Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/ebe3c2eee623afc4b3a134533b01f8d591d13f32.1454582914.git.jani.nikula@intel.com (cherry picked from commit 4e1c63e3761b84ec7d87c75b58bbc8bcf18e98ee) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-08drm/i915/dsi: defend gpio table against out of bounds accessJani Nikula
Do not blindly trust the VBT data used for indexing. Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/cc32d40c2b47f2d2151811855ac2c3dabab1d57d.1454582914.git.jani.nikula@intel.com (cherry picked from commit 5d2d0a12d3d08bf50434f0b5947bb73bac04b941) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-08drm/i915/bxt: Don't save/restore eDP panel power during suspend (v3)Matt Roper
Our attempts save/restore panel power state in i915_suspend.c are causing unclaimed register warnings on BXT since the registers for this platform differ from older platforms. The big hammer suspend/resume shouldn't be necessary for PP since the connector/encoder hooks should already handle this. In theory we could remove this for all platforms, but in practice it's likely that would cause some regressions since older platforms with LVDS may have incomplete PP handling. For now we'll leave the PCH save/restore alone and change the non-PCH branch to only operate on gen <= 4 so that BXT and future platforms aren't included. v2: Typo fix: s/||/&&/ v3: Change non-PCH condition to a gen <= 4 test rather than listing VLV/CHV/BXT as specific platforms to exclude; should be more future-proof as we add new platforms. (Daniel) Cc: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452102821-17190-1-git-send-email-matthew.d.roper@intel.com (cherry picked from commit e1ea07542352be468e901173c7a1beeee404d696) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-08drm/i915: Allow i915_gem_object_get_page() on userptr as wellChris Wilson
commit 033908aed5a596f6202c848c6bbc8a40fb1a8490 Author: Dave Gordon <david.s.gordon@intel.com> Date: Thu Dec 10 18:51:23 2015 +0000 drm/i915: mark GEM object pages dirty when mapped & written by the CPU introduced a check into i915_gem_object_get_dirty_pages() that returned a NULL pointer when called with a bad object, one that was not backed by shmemfs. This WARN was too strict as we can work on all struct page backed objects, and resulted in a WARN + GPF for existing userspace. In order to differentiate the various types of objects, add a new flags field to the i915_gem_object_ops struct to describe their capabilities, with the first flag being whether the object has struct pages. v2: Drop silly const before an integer in the structure declaration. Testcase: igt/gem_userptr_blits/relocations Reported-and-tested-by: Kristian Høgsberg Kristensen <krh@bitplanet.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Kristian Høgsberg Kristensen <krh@bitplanet.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Kristian Høgsberg Kristensen <krh@bitplanet.net> Tested-by: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 033908aed5a5 ("drm/i915: mark GEM object pages dirty when mapped & written by the CPU") Link: http://patchwork.freedesktop.org/patch/msgid/1453487551-16799-1-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit de4726649b6b1d7f3f02b2031ee99e067cb71e2d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-07Linux 4.5-rc3Linus Torvalds
2016-02-07Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "The first real batch of fixes for this release cycle, so there are a few more than usual. Most of these are fixes and tweaks to board support (DT bugfixes, etc). I've also picked up a couple of small cleanups that seemed innocent enough that there was little reason to wait (const/ __initconst and Kconfig deps). Quite a bit of the changes on OMAP were due to fixes to no longer write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but there were also other fixes. Kirkwood had a bunch of gpio fixes for some boards. OMAP had RTC fixes on OMAP5, and Nomadik had changes to MMC parameters in DT. All in all, mostly the usual mix of various fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: multi_v7_defconfig: enable DW_WATCHDOG ARM: nomadik: fix up SD/MMC DT settings ARM64: tegra: Add chosen node for tegra132 norrin ARM: realview: use "depends on" instead of "if" after prompt ARM: tango: use "depends on" instead of "if" after prompt ARM: tango: use const and __initconst for smp_operations ARM: realview: use const and __initconst for smp_operations bus: uniphier-system-bus: revive tristate prompt arm64: dts: Add missing DMA Abort interrupt to Juno bus: vexpress-config: Add missing of_node_put ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2 ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address ARM: dts: LogicPD Torpedo: Revert Duplicative Entries ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types ARM: dts: am4372: fix irq type for arm twd and global timer ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type ...
2016-02-07Merge branch 'mailbox-devel' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox fixes from Jassi Brar: - fix getting element from the pcc-channels array by simply indexing into it - prevent building mailbox-test driver for archs that don't have IOMEM * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Fix dependencies for !HAS_IOMEM archs mailbox: pcc: fix channel calculation in get_pcc_channel()
2016-02-07Merge tag 'usb-4.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes for 4.5-rc3. The usual, xhci fixes for reported issues, combined with some small gadget driver fixes, and a MAINTAINERS file update. All have been in linux-next with no reported issues" * tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: harden xhci_find_next_ext_cap against device removal xhci: Fix list corruption in urb dequeue at host removal usb: host: xhci-plat: fix NULL pointer in probe for device tree case usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms usb: xhci: set SSIC port unused only if xhci_suspend succeeds usb: xhci: add a quirk bit for ssic port unused usb: xhci: handle both SSIC ports in PME stuck quirk usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver. Revert "xhci: don't finish a TD if we get a short-transfer event mid TD" MAINTAINERS: fix my email address usb: dwc2: Fix probe problem on bcm2835 Revert "usb: dwc2: Move reset into dwc2_get_hwparams()" usb: musb: ux500: Fix NULL pointer dereference at system PM usb: phy: mxs: declare variable with initialized value usb: phy: msm: fix error handling in probe.
2016-02-07Merge tag 'staging-4.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some IIO and staging driver fixes for 4.5-rc3. All of them, except one, are for IIO drivers, and one is for a speakup driver fix caused by some earlier patches, to resolve a reported build failure" * tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: speakup: Fix allyesconfig build on mn10300 iio: dht11: Use boottime iio: ade7753: avoid uninitialized data iio: pressure: mpl115: fix temperature offset sign iio: imu: Fix dependencies for !HAS_IOMEM archs staging: iio: Fix dependencies for !HAS_IOMEM archs iio: adc: Fix dependencies for !HAS_IOMEM archs iio: inkern: fix a NULL dereference on error iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer. iio: light: acpi-als: Report data as processed iio: dac: mcp4725: set iio name property in sysfs iio: add HAS_IOMEM dependency to VF610_ADC iio: add IIO_TRIGGER dependency to STK8BA50 iio: proximity: lidar: correct return value iio-light: Use a signed return type for ltr501_match_samp_freq()
2016-02-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "22 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT radix-tree: fix oops after radix_tree_iter_retry MAINTAINERS: trim the file triggers for ABI/API dax: dirty inode only if required thp: make deferred_split_scan() work again mm: replace vma_lock_anon_vma with anon_vma_lock_read/write ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup um: asm/page.h: remove the pte_high member from struct pte_t mm, hugetlb: don't require CMA for runtime gigantic pages mm/hugetlb: fix gigantic page initialization/allocation mm: downgrade VM_BUG in isolate_lru_page() to warning mempolicy: do not try to queue pages from !vma_migratable() mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress vmstat: make vmstat_update deferrable mm, vmstat: make quiet_vmstat lighter mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT memblock: don't mark memblock_phys_mem_size() as __init dump_stack: avoid potential deadlocks mm: validate_mm browse_rb SMP race condition m32r: fix build failure due to SMP and MMU ...
2016-02-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "We have a few wire protocol compatibility fixes, ports of a few recent CRUSH mapping changes, and a couple error path fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: MOSDOpReply v7 encoding libceph: advertise support for TUNABLES5 crush: decode and initialize chooseleaf_stable crush: add chooseleaf_stable tunable crush: ensure take bucket value is valid crush: ensure bucket id is valid before indexing buckets array ceph: fix snap context leak in error path ceph: checking for IS_ERR instead of NULL
2016-02-06Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Fixes all over the place: - amdkfd: two static checker fixes - mst: a bunch of static checker and spec/hw interaction fixes - amdgpu: fix Iceland hw properly, and some fiji bugs, along with some write-combining fixes. - exynos: some regression fixes - adv7511: fix some EDID reading issues" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (38 commits) drm/dp/mst: deallocate payload on port destruction drm/dp/mst: Reverse order of MST enable and clearing VC payload table. drm/dp/mst: move GUID storage from mgr, port to only mst branch drm/dp/mst: change MST detection scheme drm/dp/mst: Calculate MST PBN with 31.32 fixed point drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil drm/mst: Add range check for max_payloads during init drm/mst: Don't ignore the MST PBN self-test result drm: fix missing reference counting decrease drm/amdgpu: disable uvd and vce clockgating on Fiji drm/amdgpu: remove exp hardware support from iceland drm/amdgpu: load MEC ucode manually on iceland drm/amdgpu: don't load MEC2 on topaz drm/amdgpu: drop topaz support from gmc8 module drm/amdgpu: pull topaz gmc bits into gmc_v7 drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above drm/amdgpu: iceland use CI based MC IP drm/amdgpu: move gmc7 support out of CIK dependency drm/amdgpu/gfx7: enable cp inst/reg error interrupts drm/amdgpu/gfx8: enable cp inst/reg error interrupts ...
2016-02-06Merge tag 'pm+acpi-4.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are: a fix for a recently introduced false-positive warnings about PM domain pointers being changed inappropriately (harmless but annoying), an MCH size workaround quirk for one more platform, a compiler warning fix (generic power domains framework), an ACPI LPSS (Intel SoCs) driver fixup and a cleanup of the ACPI CPPC core code. Specifics: - PM core fix to avoid false-positive warnings generated when the pm_domain field is cleared for a device that appears to be bound to a driver (Rafael Wysocki). - New MCH size workaround quirk for Intel Haswell-ULT (Josh Boyer). - Fix for an "unused function" compiler warning in the generic power domains framework (Ulf Hansson). - Fixup for the ACPI driver for Intel SoCs (acpi-lpss) to set the PM domain pointer of a device properly in one place that was overlooked by a recent PM core update (Andy Shevchenko). - Removal of a redundant function declaration in the ACPI CPPC core code (Timur Tabi)" * tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Avoid false-positive warnings in dev_pm_domain_set() PM / Domains: Silence compiler warning for an unused function ACPI / CPPC: remove redundant mbox_send_message() declaration ACPI / LPSS: set PM domain via helper setter PNP: Add Haswell-ULT to Intel MCH size workaround
2016-02-06epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUTJason Baron
In the current implementation of the EPOLLEXCLUSIVE flag (added for 4.5-rc1), if epoll waiters create different POLL* sets and register them as exclusive against the same target fd, the current implementation will stop waking any further waiters once it finds the first idle waiter. This means that waiters could miss wakeups in certain cases. For example, when we wake up a pipe for reading we do: wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if one epoll set or epfd is added to pipe p with POLLIN and a second set epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the wakeup since the current implementation will stop after it finds any intersection of events with a waiter that is blocked in epoll_wait(). We could potentially address this by requiring all epoll waiters that are added to p be required to pass the same set of POLL* events. IE the first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL* flags to be used by any other epfds that are added as EPOLLEXCLUSIVE. However, I think it might be somewhat confusing interface as we would have to reference count the number of users for that set, and so userspace would have to keep track of that count, or we would need a more involved interface. It also adds some shared state that we'd have store somewhere. I don't think anybody will want to bloat __wait_queue_head for this. I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE such that it can only be specified with EPOLLIN and/or EPOLLOUT. So that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop once we hit the first idle waiter that specifies the EPOLLIN bit, since any remaining waiters that only have 'POLLOUT' set wouldn't need to be woken. Likewise, we can do the same thing if 'POLLOUT' is in the wakeup bit set and not 'POLLIN'. If both 'POLLOUT' and 'POLLIN' are set in the wake bit set (there is at least one example of this I saw in fs/pipe.c), then we just wake the entire exclusive list. Having both 'POLLOUT' and 'POLLIN' both set should not be on any performance critical path, so I think that's ok (in fs/pipe.c its in pipe_release()). We also continue to include EPOLLERR and EPOLLHUP by default in any exclusive set. Thus, the user can specify EPOLLERR and/or EPOLLHUP but is not required to do so. Since epoll waiters may be interested in other events as well besides EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by doing a 'dup' call on the target fd and adding that as one normally would with EPOLL_CTL_ADD. Since I think that the POLLIN and POLLOUT events are what we are interest in balancing, I think that the 'dup' thing could perhaps be added to only one of the waiter threads. However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be sufficient for the majority of use-cases. Since EPOLLEXCLUSIVE is intended to be used with a target fd shared among multiple epfds, where between 1 and n of the epfds may receive an event, it does not satisfy the semantics of EPOLLONESHOT where only 1 epfd would get an event. Thus, it is not allowed to be specified in conjunction with EPOLLEXCLUSIVE. EPOLL_CTL_MOD is also not allowed if the fd was previously added as EPOLLEXCLUSIVE. It seems with the limited number of flags to not be as interesting, but this could be relaxed at some further point. Signed-off-by: Jason Baron <jbaron@akamai.com> Tested-by: Madars Vitolins <m@silodev.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-06radix-tree: fix oops after radix_tree_iter_retryKonstantin Khlebnikov
Helper radix_tree_iter_retry() resets next_index to the current index. In following radix_tree_next_slot current chunk size becomes zero. This isn't checked and it tries to dereference null pointer in slot. Tagged iterator is fine because retry happens only at slot 0 where tag bitmask in iter->tags is filled with single bit. Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup") Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-06MAINTAINERS: trim the file triggers for ABI/APIMichael Kerrisk (man-pages)
Commit ea8f8fc8631 ("MAINTAINERS: add linux-api for review of API/ABI changes") added file triggers for various paths that likely indicated API/ABI changes. However, catching all changes in Documentation/ABI/ and include/uapi/ produces a large volume of mail to linux-api, rather than only API/ABI changes. Drop those two entries, but leave include/linux/syscalls.h and kernel/sys_ni.c to catch syscall-related changes. [josh@joshtriplett.org: redid changelog] Signed-off-by: Michael Kerrisk <mtk.man-pages@gmail.com> Acked-by: Shuah khan <shuahkh@osg.samsung.com> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-06dax: dirty inode only if requiredDmitry Monakhov
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-06thp: make deferred_split_scan() work againKirill A. Shutemov
We need to iterate over split_queue, not local empty list to get anything split from the shrinker. Fixes: e3ae19535c66 ("thp: limit number of object to scan on deferred_split_scan()") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-06mm: replace vma_lock_anon_vma with anon_vma_lock_read/writeKonstantin Khlebnikov
Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if anon_vma appeared between lock and unlock. We have to check anon_vma first or call anon_vma_prepare() to be sure that it's here. There are only few users of these legacy helpers. Let's get rid of them. This patch fixes anon_vma lock imbalance in validate_mm(). Write lock isn't required here, read lock is enough. And reorders expand_downwards/expand_upwards: security_mmap_addr() and wrapping-around check don't have to be under anon vma lock. Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.com Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>