| Age | Commit message (Collapse) | Author |
|---|
|
This commit show additional information about rfkill state in debugfs based
on newly released documentation by Dell.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Make sure that all existing SMBIOS calls for wireless control are properly
documented. This commit also add new documentation released by Dell.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
I haven't touched the code in a long time, and I don't have access to
the hardware anymore to test any changes to this driver.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This fixes a several year old regression that I found while trying
to get the Yoga 3 11 to work. The ideapad_rfk_set function is meant
to send a command to the embedded controller through ACPI, but
as of c1f73658ed, it sends the index of the rfkill device instead
of the command, and ignores the opcode field.
This changes it back to the original behavior, which indeed
flips the rfkill state as seen in the debugfs interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c1f73658ed ("ideapad: pass ideapad_priv as argument (part 2)")
Cc: stable@vger.kernel.org # v2.6.38+
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Until now module dell-laptop registered rfkill device which used i8042
filter function for receiving HW switch rfkill events (handling special
keycode).
But for some dell laptops there is native ACPI driver dell-rbtn which can
receive rfkill events (without i8042 hooks).
So this patch will combine best from both sides. It will use native ACPI
driver dell-rbtn for receiving events and dell-laptop SMBIOS interface for
enabling or disabling radio devices. If ACPI driver or device will not be
available fallback to i8042 filter function will be used.
Patch also changes module_init() to late_initcall() to ensure that init
function will be called after initializing dell-rbtn.c driver.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch exports notifier functions so other modules can receive HW
switch events. By default when some module register notifier, dell-rbtn
driver automatically remove rfkill interfaces from system (it is expected
that other module will use events for other rfkill interface). This
behaviour can be changed with new module parameter "auto_remove_rfkill".
This patch is designed for dell-laptop module for receiving those events.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
[dvhart@linux.intel.com: Cleanup MODULE_PARM_DESC formatting and grammar]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This is an ACPI driver for Dell laptops which receive HW slider radio
switch or hotkey toggle wifi button events. It exports rfkill device
dell-rbtn (which provide correct hard rfkill state) or hotkey input device.
Alex Hung is author of original hotkey input device code.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: Alex Hung <alex.hung@canonical.com>
[fengguang.wu@intel.com: rbtn_ops can be static]
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
[dvhart@linux.intel.com: Correct multi-line comment formatting]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
acpi_video_unregister
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) and a broken_acpi_video quirk, whether or not
the acpi video bus event listener actually gets unregistered depends on
module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) samsung-laptop.ko gets loaded, calls acpi_video_unregister() causing
both the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) samsung-laptop.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) and a wmi_backlight_power quirk, whether or not
the acpi video bus event listener actually gets unregistered depends on
module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) asus-wmi.ko gets loaded, calls acpi_video_unregister() causing both
the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) asus-wmi.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Cc: acpi4asus-user@lists.sourceforge.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) whether or not the acpi video bus event listener
actually gets unregistered depends on module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) apple-gmux.ko gets loaded, calls acpi_video_unregister() causing both
the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) apple-gmux.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
pvpanic was not properly detected when _STA was missing.
ACPI 6.0 April 2015, 6.3.7 _STA (Status)
If a device object (including the processor object) does not have an
_STA object, then OSPM assumes that all of the above bits are set
(i.e., the device is present, enabled, shown in the UI, and
functioning).
Not adhering to the specification made pvpanic dormant under QEMU 2.3.
The original patch used acpi_bus_get_status_handle, which was not
being exported, so module build blew up; switch to acpi_bus_get_status
and use the status it populates.
Populated status is a bitfield so we can make the code self-documenting.
We do not check 'present' because 'enabled' has to be false in that case
by specification. Older QEMUs set 0xff to status and newer ones do 0xb.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[dvhart@linux.intel.com: Merge acpi_bug_get_status fix to avoid bisect breakage]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Lenovo G30-50 does not have a hardware wireless switch and wireless
is always blocked.
BugLink: https://bugs.launchpad.net/bugs/1397021
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Philippe Coval <philippe.coval@open.eurogiciel.org>
[dvhart@linux.intel.com: Reordered dmi id per Phillippe's later version]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch is partially based on Felipe Contrera's earlier patch, that
was discussed here: https://lkml.org/lkml/2013/10/8/800
Some problems of that patch are solved, now:
1) The main obstacle for the earlier patch seemed to be the use of
virt_to_phys, which is accepted, now
2) random memory corruption occurred on my notebook, thus DMA-able memory
is allocated now, which solves this problem
3) hwmon interface is used instead of the thermal interface, as a
hwmon device is already set up by this driver and seemed more
appropriate than the thermal interface
4) Calling the ACPI-functions was modularized thus it's possible to call
some multifunctions easily, now (by using
asus_wmi_evaluate_method_agfn).
Unfortunately the WMI doesn't support controlling both fans on
a dual-fan notebook because of an restriction in the acpi-method
"SFNS", that is callable through the wmi. If "SFNV" would be called
directly even dual fan configurations could be controlled, but not by using
wmi.
Speed readings only work on auto-mode, thus "-1" will be reported in
manual mode.
Additionally the speed readings are reported as hundreds of RPM thus
they are not too precise.
This patch is tested only on one notebook (N551JK) but a similar module,
that contained some code to try to control the second fan also, was
reported to work on an UX32VD, at least for the first fan.
As Felipe already mentioned the low-level functions are described here:
http://forum.notebookreview.com/threads/fan-control-on-asus-prime-ux31-ux31a-ux32a-ux32vd.705656/
Signed-off-by: Kast Bernd <kastbernd@gmx.de>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch adds a new file describing the sysfs entries for the
toshiba_haps driver.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch makes use of DEVICE_ATTR_{RW, WO} macros, simplifying
device attributes creation.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch simply replaces the use of sscanf with kstrtoint returning
the error code in case that something went bad.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch simply bumps the driver version to 0.22, as significant
changes were made to the driver, such as cleanups, updated events,
keymap handling, fixes and the bluetooth rfkill code removal.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch removes the check for TOS_FAILURE whenever we are using
the tci_raw function call, as that code is only returned by the
{hci, sci}_{read, write} functions and never by the tci_raw, and
thus making that check irrelevant.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch simply does some misc cleanup to comments, mainly
capitalizes some left over comments from a previous clean up and
adds some comments at the beginning of some feature function calls,
as well as some misc changes to some comments.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch simply renames the hci_{read, write}1 functions to
hci_{read, write}.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch removes the hci_{read, write}2 functions from the driver,
and the toshiba_hotkey_event_type_get function was adapted to use the
tci_raw function.
The hci_write2 function was only used by the bluetooth rfkill code,
but since its removal, it was causing build warnings, and the
hci_read2 function was only used by the toshiba_hotkey_event_type_get
function.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The function toshiba_bluetooth_status is currently printing the
status of the device whenever it is queried, but since the
introduction of the rfkill poll code, this value will get printed
everytime the poll occurs.
This patch removes the status message from the *_status function, and
adds a debug message to the *_sync_status function printing the
bluetooth device raw status, killswitch, plug and power states of the
device as well.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch adapts toshiba_bluetooth_enable, toshiba_bt_rfkill_notify
and toshiba_bt_resume functions to rfkill.
The *_enable function was cleaned from code that the rfkill code now
provides, and the other two functions were modified to update the rfkill
switch status, as they were only calling toshiba_bluetooth_enable.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch adds RFKill handler functions to the driver, allowing it
to register and update the rfkill switch status.
Also, a comment block was moved from the header to the poll function,
as it explains why we need to poll the killswitch on older devices.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch adds a struct named toshiba_bluetooth_dev, which will be
used to contain the acpi_device struct and bluetooth status booleans.
This struct will also be used by later patches to store the rfkill
struct as well.
Also, a helper function named toshiba_bluetooth_sync_status was added
to be also used by upcomming patches.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
This patch removes all bluetooth rfkill related code residing in
the toshiba_acpi driver.
Separate patches will add (and adapt) the code to toshiba_bluetooth
(where it belongs).
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
|
|
AMD CPUs don't reinitialize the SS descriptor on SYSRET, so SYSRET with
SS == 0 results in an invalid usermode state in which SS is apparently
equal to __USER_DS but causes #SS if used.
Work around the issue by setting SS to __KERNEL_DS __switch_to, thus
ensuring that SYSRET never happens with SS set to NULL.
This was exposed by a recent vDSO cleanup.
Fixes: e7d6eefaaa44 x86/vdso32/syscall.S: Do not load __USER32_DS to %ss
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull intel drm fixes from Dave Airlie.
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg
drm/i915: Workaround to avoid lite restore with HEAD==TAIL
drm/i915: cope with large i2c transfers
|
|
Pull intel iommu updates from David Woodhouse:
"This lays a little of the groundwork for upcoming Shared Virtual
Memory support — fixing some bogus #defines for capability bits and
adding the new ones, and starting to use the new wider page tables
where we can, in anticipation of actually filling in the new fields
therein.
It also allows graphics devices to be assigned to VM guests again.
This got broken in 3.17 by disallowing assignment of RMRR-afflicted
devices. Like USB, we do understand why there's an RMRR for graphics
devices — and unlike USB, it's actually sane. So we can make an
exception for graphics devices, just as we do USB controllers.
Finally, tone down the warning about the X2APIC_OPT_OUT bit, due to
persistent requests. X2APIC_OPT_OUT was added to the spec as a nasty
hack to allow broken BIOSes to forbid us from using X2APIC when they
do stupid and invasive things and would break if we did.
Someone noticed that since Windows doesn't have full IOMMU support for
DMA protection, setting the X2APIC_OPT_OUT bit made Windows avoid
initialising the IOMMU on the graphics unit altogether.
This means that it would be available for use in "driver mode", where
the IOMMU registers are made available through a BAR of the graphics
device and the graphics driver can do SVM all for itself.
So they started setting the X2APIC_OPT_OUT bit on *all* platforms with
SVM capabilities. And even the platforms which *might*, if the
planets had been aligned correctly, possibly have had SVM capability
but which in practice actually don't"
* git://git.infradead.org/intel-iommu:
iommu/vt-d: support extended root and context entries
iommu/vt-d: Add new extended capabilities from v2.3 VT-d specification
iommu/vt-d: Allow RMRR on graphics devices too
iommu/vt-d: Print x2apic opt out info instead of printing a warning
iommu/vt-d: kill bogus ecap_niotlb_iunits()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"This has a mixture of merge window cleanups and bugfixes"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: st: add include for pinctrl
i2c: mux: use proper dev when removing "channel-X" symlinks
i2c: digicolor: remove duplicate include
i2c: Mark adapter devices with pm_runtime_no_callbacks
i2c: pca-platform: fix broken email address
i2c: mxs: fix broken email address
i2c: rk3x: report number of messages transmitted
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Filipe hit two problems in my block group cache patches. We finalized
the fixes last week and ran through more tests"
* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: prevent list corruption during free space cache processing
Btrfs: fix inode cache writeout
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
three fixes for i915.
* tag 'drm-intel-next-fixes-2015-04-25' of git://anongit.freedesktop.org/drm-intel:
drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg
drm/i915: Workaround to avoid lite restore with HEAD==TAIL
drm/i915: cope with large i2c transfers
|
|
Pull NFS client updates from Trond Myklebust:
"Another set of mainly bugfixes and a couple of cleanups. No new
functionality in this round.
Highlights include:
Stable patches:
- Fix a regression in /proc/self/mountstats
- Fix the pNFS flexfiles O_DIRECT support
- Fix high load average due to callback thread sleeping
Bugfixes:
- Various patches to fix the pNFS layoutcommit support
- Do not cache pNFS deviceids unless server notifications are enabled
- Fix a SUNRPC transport reconnection regression
- make debugfs file creation failure non-fatal in SUNRPC
- Another fix for circular directory warnings on NFSv4 "junctioned"
mountpoints
- Fix locking around NFSv4.2 fallocate() support
- Truncating NFSv4 file opens should also sync O_DIRECT writes
- Prevent infinite loop in rpcrdma_ep_create()
Features:
- Various improvements to the RDMA transport code's handling of
memory registration
- Various code cleanups"
* tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (55 commits)
fs/nfs: fix new compiler warning about boolean in switch
nfs: Remove unneeded casts in nfs
NFS: Don't attempt to decode missing directory entries
Revert "nfs: replace nfs_add_stats with nfs_inc_stats when add one"
NFS: Rename idmap.c to nfs4idmap.c
NFS: Move nfs_idmap.h into fs/nfs/
NFS: Remove CONFIG_NFS_V4 checks from nfs_idmap.h
NFS: Add a stub for GETDEVICELIST
nfs: remove WARN_ON_ONCE from nfs_direct_good_bytes
nfs: fix DIO good bytes calculation
nfs: Fetch MOUNTED_ON_FILEID when updating an inode
sunrpc: make debugfs file creation failure non-fatal
nfs: fix high load average due to callback thread sleeping
NFS: Reduce time spent holding the i_mutex during fallocate()
NFS: Don't zap caches on fallocate()
xprtrdma: Make rpcrdma_{un}map_one() into inline functions
xprtrdma: Handle non-SEND completions via a callout
xprtrdma: Add "open" memreg op
xprtrdma: Add "destroy MRs" memreg op
xprtrdma: Add "reset MRs" memreg op
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"These are fixes mostly (intel_pstate, ACPI core, ACPI EC driver,
cpupower tool), a new CPU ID for the Intel RAPL driver and one
intel_pstate driver improvement that didn't make it to my previous
pull requests due to timing.
Specifics:
- Fix a build warning in the intel_pstate driver showing up in
non-SMP builds (Borislav Petkov)
- Change one of the intel_pstate's P-state selection parameters for
Baytrail and Cherrytrail CPUs to significantly improve performance
at the cost of a small increase in energy consumption (Kristen
Carlson Accardi)
- Fix a NULL pointer dereference in the ACPI EC driver due to an
unsafe list walk in the query handler removal routine (Chris
Bainbridge)
- Get rid of a false-positive lockdep warning in the ACPI container
hot-remove code (Rafael J Wysocki)
- Prevent the ACPI device enumeration code from creating device
objects of a wrong type in some cases (Rafael J Wysocki)
- Add Skylake processors support to the Intel RAPL power capping
driver (Brian Bian)
- Drop the stale MAINTAINERS entry for the ACPI dock driver that is
regarded as part of the ACPI core and maintained along with it now
(Chao Yu)
- Fix cpupower tool breakage caused by a library API change in libpci
3.3.0 (Lucas Stach)"
* tag 'pm+acpi-4.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / scan: Add a scan handler for PRP0001
ACPI / scan: Annotate physical_node_lock in acpi_scan_is_offline()
ACPI / EC: fix NULL pointer dereference in acpi_ec_remove_query_handler()
MAINTAINERS: remove maintainship entry of docking station driver
powercap / RAPL: Add support for Intel Skylake processors
cpufreq: intel_pstate: Fix an annoying !CONFIG_SMP warning
intel_pstate: Change the setpoint for Atom params
cpupower: fix breakage from libpci API change
|
|
Pull crypto fixes from Herbert Xu:
"This push fixes a build problem with img-hash under non-standard
configurations and a serious regression with sha512_ssse3 which can
lead to boot failures"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: img-hash - CRYPTO_DEV_IMGTEC_HASH should depend on HAS_DMA
crypto: x86/sha512_ssse3 - fixup for asm function prototype change
|
|
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"This series includes significant updates to the toshiba_acpi driver
and the reintroduction of the dell-laptop keyboard backlight additions
I had to revert previously. Also included are various fixes for
typos, warnings, correctness, and minor bugs.
Specifics:
dell-laptop:
- add support for keyboard backlight.
toshiba_acpi:
- adaptive keyboard, hotkey, USB sleep and charge, and backlight
updates. Update sysfs documentation.
toshiba_bluetooth:
- fix enabling/disabling loop on recent devices
apple-gmux:
- lock iGP IO to protect from vgaarb changes
other:
- Fix typos, clear gcc warnings, clarify pr_* messages, correct
return types, update MAINTAINERS"
* tag 'platform-drivers-x86-v4.1-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (25 commits)
toshiba_acpi: Do not register vendor backlight when acpi_video bl is available
MAINTAINERS: Add me on list of Dell laptop drivers
platform: x86: dell-laptop: Add support for keyboard backlight
Documentation/ABI: Update sysfs-driver-toshiba_acpi entry
toshiba_acpi: Fix pr_* messages from USB Sleep Functions
toshiba_acpi: Update and fix USB Sleep and Charge modes
wmi: Use bool function return values of true/false not 1/0
toshiba_bluetooth: Fix enabling/disabling loop on recent devices
toshiba_bluetooth: Clean up *_add function and disable BT device at removal
toshiba_bluetooth: Add three new functions to the driver
toshiba_acpi: Fix the enabling of the Special Functions
toshiba_acpi: Use the Hotkey Event Type function for keymap choosing
toshiba_acpi: Add Hotkey Event Type function and definitions
x86/wmi: delete unused wmi_data_lock mutex causing gcc warning
apple-gmux: lock iGP IO to protect from vgaarb changes
MAINTAINERS: Add missing Toshiba devices and add myself as maintainer
toshiba_acpi: Update events in toshiba_acpi_notify
intel-oaktrail: Fix trivial typo in comment
thinkpad_acpi: off by one in adaptive_keyboard_hotkey_notify_hotkey()
thinkpad_acpi: signedness bugs getting current_mode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform
Pull chrome platform updates from Olof Johansson:
"Here's a set of updates to the Chrome OS platform drivers for this
merge window.
Main new things this cycle is:
- Driver changes to expose the lightbar to users. With this, you can
make your own blinkenlights on Chromebook Pixels.
- Changes in the way that the atmel_mxt trackpads are probed. The
laptop driver is trying to be smart and not instantiate the devices
that don't answer to probe. For the trackpad that can come up in
two modes (bootloader or regular), this gets complicated since the
driver already knows how to handle the two modes including the
actual addresses used. So now the laptop driver needs to know more
too, instantiating the regular address even if the bootloader one
is the probe that passed.
- mfd driver improvements by Javier Martines Canillas, and a few
bugfixes from him, kbuild and myself"
* tag 'chrome-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
platform/chrome: chromeos_laptop - instantiate Atmel at primary address
platform/chrome: cros_ec_lpc - Depend on X86 || COMPILE_TEST
platform/chrome: cros_ec_lpc - Include linux/io.h header file
platform/chrome: fix platform_no_drv_owner.cocci warnings
platform/chrome: cros_ec_lightbar - fix duplicate const warning
platform/chrome: cros_ec_dev - fix Unknown escape '%' warning
platform/chrome: Expose Chrome OS Lightbar to users
platform/chrome: Create sysfs attributes for the ChromeOS EC
mfd: cros_ec: Instantiate ChromeOS EC character device
platform/chrome: Add Chrome OS EC userspace device interface
platform/chrome: Add cros_ec_lpc driver for x86 devices
mfd: cros_ec: Add char dev and virtual dev pointers
mfd: cros_ec: Use fixed size arrays to transfer data with the EC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
Pull arch/cris updates from Jesper Nilsson:
"Some much needed love for the CRIS-port.
There's a bunch of changes this time, giving the CRISv32 port a bit of
modern makeover with device-tree, irq domain and gpiolib support, and
more switchover to generic frameworks.
Some small fixes and removal of the theoretical SMP support brings up
the rear"
* tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
cris: fix integer overflow in ELF_ET_DYN_BASE
CRISv32: use GENERIC_SCHED_CLOCK
CRISv32: use MMIO clocksource
CRISv32: use generic clockevents
CRIS: use generic headers via Kbuild
CRIS: use generic cmpxchg.h
CRIS: use generic atomic.h
CRIS: use generic atomic bitops
CRISv10: remove redundant macros from system.h
CRIS: remove SMP code
CRISv32: don't enable irqs in INIT_THREAD
CRISv32: handle multiple signals
CRISv32: prevent bogus restarts on sigreturn
CRISv32: don't attempt syscall restart on irq exit
Add binding documentation for CRIS
CRIS: add Axis 88 board device tree
CRISv32: add device tree support
CRISv32: add irq domains support
CRIS: enable GPIOLIB
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc fixes from Michael Ellerman:
- fix for mm_dec_nr_pmds() from Scott.
- fixes for oopses seen with KVM + THP from Aneesh.
- build fixes from Aneesh & Shreyas.
* tag 'powerpc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc/mm: Fix build error with CONFIG_PPC_TRANSACTIONAL_MEM disabled
powerpc/kvm: Fix ppc64_defconfig + PPC_POWERNV=n build error
powerpc/mm/thp: Return pte address if we find trans_splitting.
powerpc/mm/thp: Make page table walk safe against thp split/collapse
KVM: PPC: Remove page table walk helpers
KVM: PPC: Use READ_ONCE when dereferencing pte_t pointer
powerpc/hugetlb: Call mm_dec_nr_pmds() in hugetlb_free_pmd_range()
|
|
Pull second batch of KVM changes from Paolo Bonzini:
"This mostly includes the PPC changes for 4.1, which this time cover
Book3S HV only (debugging aids, minor performance improvements and
some cleanups). But there are also bug fixes and small cleanups for
ARM, x86 and s390.
The task_migration_notifier revert and real fix is still pending
review, but I'll send it as soon as possible after -rc1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits)
KVM: arm/arm64: check IRQ number on userland injection
KVM: arm: irqfd: fix value returned by kvm_irq_map_gsi
KVM: VMX: Preserve host CR4.MCE value while in guest mode.
KVM: PPC: Book3S HV: Use msgsnd for signalling threads on POWER8
KVM: PPC: Book3S HV: Translate kvmhv_commence_exit to C
KVM: PPC: Book3S HV: Streamline guest entry and exit
KVM: PPC: Book3S HV: Use bitmap of active threads rather than count
KVM: PPC: Book3S HV: Use decrementer to wake napping threads
KVM: PPC: Book3S HV: Don't wake thread with no vcpu on guest IPI
KVM: PPC: Book3S HV: Get rid of vcore nap_count and n_woken
KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu
KVM: PPC: Book3S HV: Minor cleanups
KVM: PPC: Book3S HV: Simplify handling of VCPUs that need a VPA update
KVM: PPC: Book3S HV: Accumulate timing information for real-mode code
KVM: PPC: Book3S HV: Create debugfs file for each guest's HPT
KVM: PPC: Book3S HV: Add ICP real mode counters
KVM: PPC: Book3S HV: Move virtual mode ICP functions to real-mode
KVM: PPC: Book3S HV: Convert ICS mutex lock to spin lock
KVM: PPC: Book3S HV: Add guest->host real mode completion counters
KVM: PPC: Book3S HV: Add helpers for lock/unlock hpte
...
|
|
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The new Atmel MXT driver expects i2c client's address contain the
primary (main address) of the chip, and calculates the expected
bootloader address form the primary address. Unfortunately chrome_laptop
does probe the devices and if touchpad (or touchscreen, or both) comes
up in bootloader mode the i2c device gets instantiated with the
bootloader address which confuses the driver.
To work around this issue let's probe the primary address first. If the
device is not detected at the primary address we'll probe alternative
addresses as "dummy" devices. If any of them are found, destroy the
dummy client and instantiate client with proper name at primary address
still.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Calling unlazy_walk() in walk_component() and do_last() when we find
a symlink that needs to be followed doesn't acquire a reference to vfsmount.
That's fine when the symlink is on the same vfsmount as the parent directory
(which is almost always the case), but it's not always true - one _can_
manage to bind a symlink on top of something. And in such cases we end up
with excessive mntput().
Cc: stable@vger.kernel.org # since 2.6.39
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
I_DIO_WAKEUP is never directly used, but fix it up anyway.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
do_blockdev_direct_IO() increments and decrements the inode
->i_dio_count for each IO operation. It does this to protect against
truncate of a file. Block devices don't need this sort of protection.
For a capable multiqueue setup, this atomic int is the only shared
state between applications accessing the device for O_DIRECT, and it
presents a scaling wall for that. In my testing, as much as 30% of
system time is spent incrementing and decrementing this value. A mixed
read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with
better latencies too. Before:
clat percentiles (usec):
| 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34],
| 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35],
| 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80],
| 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155],
| 99.99th=[ 165]
After:
clat percentiles (usec):
| 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149],
| 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171],
| 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270],
| 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422],
| 99.99th=[ 438]
In other setups, Robert Elliott reported seeing good performance
improvements:
https://lkml.org/lkml/2015/4/3/557
The more applications accessing the device, the worse it gets.
Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells
do_blockdev_direct_IO() that it need not worry about incrementing
or decrementing the inode i_dio_count for this caller.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Elliott, Robert (Server Storage) <elliott@hp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Al Viro's IOV changes broke 9p readdir() because the new code
didn't abort the read when it returned nothing. The original
code checked if the combined error/length was <= 0 but in the
new code that accidentally got changed to just an error check.
Add back the return from the function when nothing is read.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: e1200fe68f20 ("9p: switch p9_client_read() to passing struct iov_iter *")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__btrfs_write_out_cache is holding the ctl->tree_lock while it prepares
a list of bitmaps to record in the free space cache. It was dropping
the lock while it worked on other components, which made a window for
free_bitmap() to free the bitmap struct without removing it from the
list.
This changes things to hold the lock the whole time, and also makes sure
we hold the lock during enospc cleanup.
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
commit a39f46df33c6 ("toshiba_acpi: Fix regression caused by backlight extra
check code") causes the backlight to no longer work on the Toshiba Z30,
reverting that commit fixes this but restores the original issue fixed
by that commit.
Looking at the toshiba_acpi backlight code for a fix for this I noticed that
the toshiba code is the only code under platform/x86 which unconditionally
registers a vendor acpi backlight interface, without checking for acpi_video
backlight support first.
This commit adds the necessary checks bringing toshiba_acpi in line with the
other drivers, and fixing the Z30 regression without needing to revert the
commit causing it.
Chances are that there will be some Toshiba models which have a non working
acpi-video implementation while the toshiba vendor backlight interface does
work, this commit adds an empty dmi_id table where such systems can be added,
this is identical to how other drivers handle such systems.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1206036
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=86521
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-and-tested-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
