summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-25gpio: Propagate all errors in devm_get_gpiod_from_child()Geert Uytterhoeven
devm_get_gpiod_from_child() tries several property suffixes to find a GPIO descriptor. If all suffixes fail and no probe deferral has been detected, it returns the error of the last try. However, if any but the last try fails with a real error (e.g. -EBUSY), this error is not propagated, and -ENOENT will be returned. This confuses drivers that e.g. want to detect if a GPIO is already in use. To fix this, change the loop logic to continue on -ENOENT, which indicates the property was not found and the next suffix should be tried, and propagate all other detected errors. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-23tools: gpio: Small updates for output formatMarkus Pargmann
Use %2d for the GPIO line number. This should align the results horziontally for most gpio chips. The GPIO label uses quotes for real values. For GPIO names this is currently missing. The patch adds the missing quote. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-22gpio: fixup line flags for userspace ABILinus Walleij
This fixes the wrongly indicated lines in the userspace ABI: test for the right BITS, do not treat bit numbers as bitmasks. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-20Revert "gpio: remove broken irq_to_gpio() interface"Linus Walleij
This reverts commit ee2204a37957daed80418ea8ffc4f5c3146fb8e7.
2016-02-20gpiolib: fix crash when gpiochip removedBamvor Jian Zhang
Commit cb464a88e1ed ("gpio: make the gpiochip a real device") call gpiochip_sysfs_unregister after the gpiochip is empty. It lead to the following crash: [ 163.503994] Unable to handle kernel NULL pointer dereference at virtual address 0000007c [...] [ 163.525394] [<ffffffc0003719a0>] gpiochip_sysfs_unregister+0x44/0xa4 [ 163.525611] [<ffffffc00036f6a0>] gpiochip_remove+0x24/0x154 [ 163.525861] [<ffffffbffc00f0a4>] mockup_gpio_remove+0x38/0x64 [gpio_mockup] [ 163.526101] [<ffffffc00042b4b4>] platform_drv_remove+0x24/0x64 [ 163.526313] [<ffffffc000429cc8>] __device_release_driver+0x7c/0xfc [ 163.526525] [<ffffffc000429e54>] driver_detach+0xbc/0xc0 [ 163.526700] [<ffffffc000429014>] bus_remove_driver+0x58/0xac [ 163.526883] [<ffffffc00042a4cc>] driver_unregister+0x2c/0x4c [ 163.527067] [<ffffffc00042b5c0>] platform_driver_unregister+0x10/0x18 [ 163.527284] [<ffffffbffc00f340>] mock_device_exit+0x10/0x38 [gpio_mockup] [ 163.527593] [<ffffffc00011cefc>] SyS_delete_module+0x1b8/0x1fc [ 163.527799] [<ffffffc000085d8c>] __sys_trace_return+0x0/0x4 [ 163.528049] Code: 940d74b4 f9019abf aa1303e0 940d7439 (7940fac0) [ 163.536273] ---[ end trace 3d1329be504af609 ]--- This patch fix this by changing the code back. Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19gpio: pisosr: add missing unlockSudip Mukherjee
If spi_read() fails then we just returned but we missed unlocking the mutex. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19gpio: X-Gene standby GPIO controller DTS bindingQuan Nguyen
Update description for X-Gene standby GPIO controller DTS binding to support GPIO line configuration as input, output or external IRQ pin. Signed-off-by: Y Vo <yvo@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19gpio: xgene: Enable X-Gene standby GPIO as interrupt controllerQuan Nguyen
Enable X-Gene standby GPIO controller as interrupt controller to provide its own resources. This avoids ambiguity where GIC interrupt resource is use as X-Gene standby GPIO interrupt resource in user driver. Signed-off-by: Y Vo <yvo@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19MIPS: txx9: rbtx4938: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: linux-mips@linux-mips.org Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19MIPS: txx9: iocled: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: linux-mips@linux-mips.org Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19MIPS: rb532: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: linux-mips@linux-mips.org Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19MIPS: txx9: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: linux-mips@linux-mips.org Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19MIPS: jz4740: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: linux-mips@linux-mips.org Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19MIPS: bcm63xx: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: linux-mips@linux-mips.org Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19MIPS: ar7: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: linux-mips@linux-mips.org Cc: Alban Bedel <albeu@free.fr> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19MIPS: alchemy: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: linux-mips@linux-mips.org Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19m68k: gpio: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19blackfin: extgpio: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: Steven Miao <realmz6@gmail.com> Cc: adi-buildroot-devel@lists.sourceforge.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19blackfin: gpio: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: Steven Miao <realmz6@gmail.com> Cc: adi-buildroot-devel@lists.sourceforge.net Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19ARM: plat-orion: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19ARM: w90x900: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19ARM: simpad: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19ARM: s3c24xx: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19ARM: ixp4xx: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19ARM: imx: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19ARM: gemini: switch to gpiochip_add_data()Linus Walleij
We're planning to remove the gpiochip_add() function to swith to gpiochip_add_data() with NULL for data argument. Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19ARM: scoop: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: arm@kernel.org Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19pinctrl: cygnus-gpio: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: bcm-kernel-feedback-list@broadcom.com Cc: Scott Branden <sbranden@broadcom.com> Cc: Jon Mason <jonmason@broadcom.com> Acked-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19gpio: add userspace ABI for GPIO line informationLinus Walleij
This adds a GPIO line ABI for getting name, label and a few select flags from the kernel. This hides the kernel internals and only tells userspace what it may need to know: the different in-kernel consumers are masked behind the flag "kernel" and that is all userspace needs to know. However electric characteristics like active low, open drain etc are reflected to userspace, as this is important information. We provide information on all lines on all chips, later on we will likely add a flag for the chardev consumer so we can filter and display only the lines userspace actually uses in e.g. lsgpio, but then we first need an ABI for userspace to grab and use (get/set/select direction) a GPIO line. Sample output from "lsgpio" on ux500: GPIO chip: gpiochip7, "8011e000.gpio", 32 GPIO lines line 0: unnamed unlabeled line 1: unnamed unlabeled (...) line 25: unnamed "SFH7741 Proximity Sensor" [kernel output open-drain] line 26: unnamed unlabeled (...) Tested-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19gpio: store reflect the label to userspaceLinus Walleij
The gpio_chip label is useful for userspace to understand what kind of GPIO chip it is dealing with. Let's store a copy of this label in the gpio_device, add it to the struct passed to userspace for GPIO_GET_CHIPINFO_IOCTL and modify lsgpio to show it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19gpio: tps65218: remove unused #includeLinus Walleij
Just as it says: after adding the proper interfaces to gpiolib, this is no longer needed. Suggested-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-18gpio: allow setting ARCH_NR_GPIOS from KconfigArnd Bergmann
The ARM version of asm/gpio.h basically just contains the same definitions as the gpiolib version, with the exception of ARCH_NR_GPIOS. This adds the option for overriding the constant through Kconfig to the architecture-independent header, so we can remove the ARM specific file later. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-18gpio: ks8695: remove irq_to_gpio functionArnd Bergmann
The ks8695 gpio driver has its own copy of the irq_to_gpio() function. This is completely unused in the mainline kernel after we converted all remaining users several years ago, so we can remove the definition as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-18gpio: remove broken irq_to_gpio() interfaceArnd Bergmann
gpiolib has removed the irq_to_gpio() API several years ago, but the global header still provided a non-working stub. To prevent new users of this broken function from showing up, let's remove the stubs as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-18MIPS: jz4740: Fix surviving instance of irq_to_gpio()Ralf Baechle
This is fallout from commit 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h"). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
2016-02-18gpio: use kzalloc to allocate gpio_deviceJosh Cartwright
The use of kmalloc() to allocate the gpio_device leaves the contained struct device object in an unknown state. Calling dev_set_name() on a struct device of unknown state can trigger the free() of an invalid pointer, as seen in the following backtrace (collected by Tony Lindgren): kfree kobject_set_name_vargs dev_set_name gpiochip_add_data omap_gpio_probe platform_drv_probe ... Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Reported-by: Michael Welling <mwelling@ieee.org> Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Michael Welling <mwelling@ieee.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Josh Cartwright <joshc@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-16gpio-mcp23s08: correctly handling failed allocationInsu Yun
Since devm_kzalloc can be failed in memory pressure, it needs to check and return -ENOMEM Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-16gpio: tps65218: Make tps65218_gpio_output set proper output levelAxel Lin
The .direction_output callback should set proper output level. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-16gpio: tpic2810: Make tpic2810_direction_output set proper output levelAxel Lin
The .direction_output callback should set proper output level. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-16gpio: create an API to detect open drain/source on linesLinus Walleij
My left hand merges code to privatize the descriptor handling while my right hand merges drivers that poke around and disrespect with the same gpiolib internals. So let's expose the proper APIs for drivers to ask the gpiolib core if a line is marked as open drain or open source and get some order around things so this driver compiles again. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Nicolas Saenz Julienne <nicolassaenzj@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15gpio: davinci: Fix possible NULL pointer deferenceNicholas Krause
This fixes a possible NULL pointer deference in the function, davinci_gpio_probe due to the function, gpio2regs being able to return a NULL pointer if it rans to get the registers for the gpio devices on a davinci board. Furthermore if this does arise return -ENXIO to signal callers that this case has arisen and avoiding setting the regs or other pointer values on the Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15gpio: Remove unused asm/gpio.h filesBjorn Helgaas
asm/gpio.h is included only by linux/gpio.h, and then only when the arch selects ARCH_HAVE_CUSTOM_GPIO_H. Only the following arches select it: arm avr32 blackfin m68k (COLDFIRE only) sh unicore32. Remove the unused asm/gpio.h files for the arches that do not select ARCH_HAVE_CUSTOM_GPIO_H. This is a follow-on to 7563bbf89d06 ("gpiolib/arches: Centralise bolierplate asm/gpio.h"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15gpio: Include linux/gpio.h instead of asm/gpio.hBjorn Helgaas
Most arches have an asm/gpio.h that merely includes linux/gpio.h. The others select ARCH_HAVE_CUSTOM_GPIO_H, and when that's selected, linux/gpio.h includes asm/gpio.h. Therefore, code should include linux/gpio.h instead of including asm/gpio.h directly. Remove includes of asm/gpio.h, adding an include of linux/gpio.h when necessary. This is a follow-on to 7563bbf89d06 ("gpiolib/arches: Centralise bolierplate asm/gpio.h"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15gpio: TS-4800: remove useless bgpio_init flagsJulien Grossholtz
No flags are required for bgpio_init in the TS-4800 gpio driver. This patch set zero instead. The driver will have the same behaviour since the & operator between the flags already resulted to zero. Fixes: 5041e791440a ("gpio: add TS-4800 fpga GPIO support") Signed-off-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15gpio: move the subdriver data pointer into gpio_deviceLinus Walleij
We move to manage this pointer under gpiolib control rather than leave it in the subdevice's gpio_chip. We can not NULL it after gpiochip_remove so at to keep things tight. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15gpio: move the pin ranges into gpio_deviceLinus Walleij
Instead of keeping this reference to the pin ranges in the client driver-supplied gpio_chip, move it to the internal gpio_device as the drivers have no need to inspect this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15pinctrl: sirf/atlas7: stop poking around in GPIO internalsLinus Walleij
This code is poking around in the gpio_chip:s internal structures to achieve some kind of pin to GPIO mappings. - It is wrong to poke around in these structs and the pinctrl maintainer was stupid to let it pass unnoticed, mea culpa. - The right interface to use is gpiochip_add_pin_range() - The code appears unused: the pin control part of the driver is not adding any ranges, so we're iterating over an empty list. Maybe it is poking around in some other pin controllers GPIO ranges, and that's just totally wrong, again use gpiochip_add_pin_range() and specify the right pin controller. Cc: Barry Song <baohua@kernel.org> Cc: Guoying Zhang <Guoying.Zhang@csr.com> Cc: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15gpio: ws16c48: Use devm_request_regionWilliam Breathitt Gray
By the time request_region is called in the WinSystems WS16C48 GPIO driver, a corresponding device structure has already been allocated. The devm_request_region function should be used to help simplify the cleanup code and reduce the possible points of failure. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15gpio: sch311x: Use devm_request_regionWilliam Breathitt Gray
By the time request_region is called in the SMSC SCH311x GPIO driver, a corresponding device structure has already been allocated. The devm_request_region function should be used to help simplify the cleanup code and reduce the possible points of failure. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15gpio: ich: Use devm_request_regionWilliam Breathitt Gray
By the time request_region is called in the Intel ICH series GPIO driver, a corresponding device structure has already been allocated. The devm_request_region function should be used to help simplify the cleanup code and reduce the possible points of failure. Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v0.10.2 at 2024-09-18 08:01:47 (GMT)