summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-05-29[ALSA] Suppress error messageTakashi Iwai
HDA Codec driver Suppressing the error message regarding no AFG. This is often harmless (e.g. probing a modem codec). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] make code staticAdrian Bunk
CA0106 driver,HDA Codec driver This patch makes needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Remove obsolete mixer controlTakashi Iwai
AC97 Codec Removed the obsolete mixer control for AD1985. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] usb-audio - avoid unnecessary double bufferingClemens Ladisch
USB generic driver When a USB packet boundary falls exactly on a buffer boundary, hwptr remains at the end of the buffer which causes an overflow in the next iteration and triggers double buffering although the next packet would actually be contiguous. This patch ensures that hwptr is always smaller than buffer_size. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - sanity-check sync feedback frequency valuesClemens Ladisch
USB generic driver Check that the synchronization feedback frequency values returned by the device are more or less near the nominal frequency. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] Rename pci_vendor/pci_device to pci_subvendor/pci_subdeviceTakashi Iwai
HDA Codec driver,HDA generic driver Renamed pci_vendor/pci_device fields to pci_subvendor/pci_subdevice. They are really PCI subsystem IDs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Add support of VIA VT8251/VT8237A HD-Audio controllersTakashi Iwai
Documentation,HDA Intel driver Added the support of VIA VT8251/VT8237A HD-Audio controllers. They are (almost) compatible with Intel ICH6/7. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Adding support for ATI IXP450 HD Audio device supportFrederick Li
Documentation,HDA Intel driver This patch changes the Intel HD Audio device driver to include the support of HD Audio device embedded in ATI south bridge IXP450. Because the design of ATI chipset follows intel HD Audio specification 1.0, the programming method is the same as that of intel HD Audio device exception one minor change which requires to enable snoop for DMA transport. There are 3 changes that have been made to hda_intel.c file. 1. Added device ID for ATI HD Audio device; 2. Increase maximum CODEC supported to 4; 3. Enable snoop during the driver initialization. Signed-off-by: Frederick Li <fli@ati.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Add test model for debugging ALC880 devicesTakashi Iwai
HDA Codec driver Added 'test' model for testing/debugging the devices with ALC880 codec. This model is built only when CONFIG_SND_DEBUG is set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Add ASUS Z71V supportTakashi Iwai
Documentation,HDA Codec driver Added the ASUS Z71V (or similar) laptop support. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Add position_fix module optionTakashi Iwai
Documentation,HDA Intel driver Added position_fix module option to HDA-intel driver for fixing up the DMA position (possibly hardware-) bugs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] maestro3: HP OmniBook HW volume button magicVille Syrjala
Maestro3 driver Some HP OmniBook laptops (500 and 6000 at least) require some GPIO magic before the HW volume buttons work. This patch makes them work mostly. Something is still missing to make them work perfectly. However I have been unable to figure out what exactly. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] maestro3: Add HW volume button supportVille Syrjala
Maestro3 driver Add support for hardware volume buttons. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] maestro3: Fix interrupt ack and disableVille Syrjala
Maestro3 driver Due to a typo interrupts were never actually acked or disabled. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] ARM AACI primecell driverRussell King
ARM,/arm/Makefile,ARM AACI PL041 driver Add support for the ARM AACI Primecell, which provides an AC'97 based interface. This driver only provides playback support. This has been extensively tested with an LM4549 AC'97 codec. Signed-off-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] ARM DMA subsystemRussell King
ARM DMA routines The patch below adds a convenient re-usable shim around the extended ARM DMA API, and is used by several ARM ALSA drivers. Signed-off-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] emu10k1 - add SB0060 to emu_chip_detailsMikael Magnusson
EMU10K1/EMU10K2 driver The following patch adds SB0060 to emu_chip_details. Signed-off-by: Mikael Magnusson <mikaelmagnusson@glocalnet.net> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-05-29[ALSA] usb-audio - bind to control interface instead of usb_deviceClemens Ladisch
USB generic driver Bind the device files to the (first) audio control interface instead of the entire USB device. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] ac97 - enable multichannel output on AD198x codecsClemens Ladisch
AC97 Codec The code for AD1980/AD1985/AD1986 codecs forgot to enable the code to switch the jack sharing bits on AD1888-compatible codecs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] ac97 - fix Mic jack sharing on AD1888 codecsClemens Ladisch
AC97 Codec The code for modifying the center/LFE disable bit on AD1888 codecs accidentally toggled the mute split bit instead. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - add a proc file for Audigy 2 NX jack statusClemens Ladisch
USB generic driver This patch adds a proc file for the SB Audigy 2 NX which shows the connection status of the various jacks. Unfortunately, no SPDIF input frequency (yet). Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - remove superfluous LIRC ioctlsClemens Ladisch
USB generic driver The ioctls for LIRC compatibility can be removed because the infrastructure and detection stuff is better done in user space. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - enable high speed (not) on Audigy 2 NXClemens Ladisch
USB generic driver The SB Audigy 2 NX needs a special boot-up command before it works in high speed mode. However, we don't actually enable it yet because high speed synchronization doesn't seem to work with this device. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] Fix snd-usb-audio dependency on snd-hwdep.James Courtier-Dutton
USB Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] cs4281 - fix DLLRDY not seen problemArnaud Patard
CS4281 driver Reset the FPDN bit of the EPPMC register if needed. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-05-29[ALSA] Increase capture buffer sizes.James Courtier-Dutton
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] Implement different capture sources.James Courtier-Dutton
EMU10K1/EMU10K2 driver e.g. When HD Capture source is set to SPDIF, setting HD Capture channel to 0 captures from CDROM digital input. setting HD Capture channel to 1 captures from SPDIF in. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] Support multiple capture rates on p16v.James Courtier-Dutton
EMU10K1/EMU10K2 driver The capture rate does in fact vary, but it only captures anything if the HD Capture source is set to I2S or AC97. I have not tested if the sound is actually captured from an physical input of some type or not. TODO: Get SPDIF capture working. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] Update A_SAMPLE_RATE register details.James Courtier-Dutton
EMU10K1/EMU10K2 driver Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-29[ALSA] usb-audio - set sample rate attribute on Audigy 2 NX endpointsClemens Ladisch
USB generic driver The SB Audigy 2 NX does not advertise the sample rate attribute in its endpoint descriptors although it supports it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - Audigy 2 NX blinkenlightsClemens Ladisch
USB generic driver Adds mixer controls for the CMSS/Dolby Digital/Power LEDs on the SB Audigy 2 NX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - make SB remote control device LIRC compatibleClemens Ladisch
USB generic driver Add ioctls to the Sound Blaster remote control hwdep device so that it can be used with LIRC. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - use only one packet in synchronization feedback URBsClemens Ladisch
USB generic driver Do not use more than one packet in synchronization feedback URBs because it would be pointless to send or receive more than one value at the same time. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - use proper interval between synchronization packetsClemens Ladisch
USB generic driver Add sanity checks when reading the bRefresh value, and actually use it for the synchronization packets instead of polling at 1000 Hz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - allow type 0 extension unitsClemens Ladisch
USB generic driver Extension units can have type 0, so do not ignore them when constructing mixer controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - cache vendor/product IDsClemens Ladisch
USB generic driver Cache the decoded values of idVendor/idProduct to get rid of most of those ugly le16_to_cpu() calls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - add Extigy/Audigy 2 NX remote control supportClemens Ladisch
ALSA Core,USB generic driver Add an hwdep interface that supports reading remote control data from Sound Blaster Extigy and Audigy 2 NX devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - add mixer control notificationsClemens Ladisch
USB generic driver Add support for the optional status interrupt endpoint in audio control interfaces, and translate USB status notifications into ALSA mixer control notifications. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - move mixer data into separate structClemens Ladisch
USB generic driver Move all data related to audio control interfaces into a separate struct local to usbmixer.c. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - reduce size of unitbitmap arrayClemens Ladisch
USB generic driver Unit/terminal IDs are 8-bit integers, so the unitbitmap variable does not need to be bigger than 256 bits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - restrict Audigy 2 NX frequencies to 48/96 kHzClemens Ladisch
USB generic driver On the SB Audigy 2 NX, frequency feedback doesn't quite work when playing at 44.1 kHz, so temporarily disable this frequency. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29ALSA CVS updateJaroslav Kysela
ALSA Version 1.0.9rc3 Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-05-29[ALSA] hdsp - solved big endian problemThomas Charbonnel
RME HDSP driver ppc firmware upload fix Signed-off-by: Thomas Charbonnel <thomas@undata.org> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-05-29[ALSA] ac97 - add the 'Mic Front Input Switch' control (ALC850)Sergey Vlasov
AC97 Codec Add the 'Mic Front Input Switch' control to the mixer for ALC850. Enabling this input is required for using the front panel microphone connector with ASUS A8V motherboard. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-05-29[ALSA] fix behaviour of ac97_enum_mixer elementsSergey Vlasov
AC97 Codec ac97_enum mixer elements (e.g., 'Capture Source') did not work because of wrong bitmask calculation in snd_ac97_get_enum_double() and snd_ac97_put_enum_double(). https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1072 Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2005-05-29[ALSA] usb-audio - remove superfluous parameterClemens Ladisch
USB generic driver,USB USX2Y This patch removes the superfluous driver parameter from the disconnect functions. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - add selector unit names override for Audigy 2 NXClemens Ladisch
USB generic driver Add a mechanism to specify source names of selector units, and add such names for the SB Audigy 2 NX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio - show exact synchronous frequency in proc fileClemens Ladisch
USB generic driver In the streamX proc file, show the exact number of samples per USB frame as 16.16 hexadecimal floating point value. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] usb-audio: add Audigy 2 NX control namesClemens Ladisch
USB generic driver Add a mixer control map for the SB Audigy 2 NX so that we get meaningful mixer control names. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-05-29[ALSA] Add dxs_support entry for MSI K8T Neo-FIS2RTakashi Iwai
VIA82xx driver Report by Ronny V. Vindenes <s864@ii.uib.no> Add dxs_support=5 for MSI K8T Neo-FIS2R. Signed-off-by: Takashi Iwai <tiwai@suse.de>