summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-30ASoC: soc-cache: Warn on syncing any non-writable registersDimitris Papastamos
When syncing the cache, if the driver has given us a writable_register() callback, use it to check if we are syncing a non-writable register and if so warn the user. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: soc-cache: Fix indentation issuesDimitris Papastamos
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: Blackfin: push down SPORT settings from global variablesBarry Song
Now that we have multi-component support, take the time to unify the SPORT implementations a bit and make the setup dynamic. This kills off the global sport_handle which was shared across all the Blackfin machine drivers. The pin management aspect is off loaded to platform resources, and now multiple SPORTs can be instantiated simultaneously. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: Blackfin: standardize machine driver namesMike Frysinger
Some machine drivers were using "bf5xx-", others were using "bf5xx_", while others were using "bfin-". Further, some were using the same name in the transport layer which makes it hard to use different codecs at the same time. So standardize all of them to "bfin-" and make sure they are name spaced according to their driver name. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: Blackfin: drop "-codec" from codec namesMike Frysinger
The recent multi-component patch incorrectly added "-codec" suffixes to parts which are not MFD. Drop the suffix from the machine drivers too. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: Blackfin: add ad193x sysclk configurationScott Jiang
Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: SSM2602: convert to soc-cacheCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: ad1980: fix codec nameMike Frysinger
The codec name should not have a "-codec" suffix since this is not part of a MFD. This was incorrectly changed during the multi-component updated. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: ad193x: fix codec nameMike Frysinger
The codec name should not have a "-codec" suffix since this is not part of a MFD. This was incorrectly changed during the multi-component updated. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: ad73311: fix codec nameMike Frysinger
The codec name should not have a "-codec" suffix since this is not part of a MFD. This was incorrectly changed during the multi-component updated. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: SSM2602: fix codec nameMike Frysinger
The codec name should not have a "-codec" suffix since this is not part of a MFD. This was incorrectly changed during the multi-component updated. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: fix sorting order of codecs in kconfigMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-29ASoC: Remove -codec from WM8731 driver nameMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-29ASoC: Convert WM8731 to table based DAPM setupMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-29ASoC: Convert WM8903 to table based DAPM setupMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-29Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-03-29ASoC: Fix CODEC device name for CorgiMark Brown
Got typoed in the multi-component changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-26ASoC: ad73311: drop I2C requirementScott Jiang
The AD73311 codec does not use I2C, so don't require it in Kconfig. Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: ad193x: tweak style to match other codecsScott Jiang
Rename the snd_soc_control_type field from "bus_type" to "control_type", and drop the now unused "control_data" field. Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: Blackfin I2S: add 8-bit sample supportCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: Add snd_soc_codec_{readable,writable}_register()Dimitris Papastamos
Provide the top level ASoC core functions for indicating whether a given register is readable or writable. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: Add default snd_soc_default_writable_register() callbackDimitris Papastamos
By using struct snd_soc_reg_access for the read/write/vol attributes of the registers, we provide callbacks that automatically determine whether a given register is readable/writable or volatile. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: soc-cache: Return -ENOSYS instead of -EINVALDimitris Papastamos
These functions fail with -EINVAL if the corresponding callbacks are not implemented. Change them to return -ENOSYS as it is more appropriate for unimplemented callbacks. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: soc-cache: Factor-out the SPI write codeDimitris Papastamos
The handling of all snd_soc_x_y_spi_write() functions is similar. Create a separate function and update all callers to use it. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: soc-cache: Factor-out the hw_read() specific codeDimitris Papastamos
The handling of all snd_soc_x_y_read() functions is similar. Factor it out into a separate function and update all callers. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: soc-cache: Factor-out the hw_write() specific codeDimitris Papastamos
The handling of all snd_soc_x_y_write() functions is similar. Factor it out into a separate function and update all functions to use it. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: Add control_type in snd_soc_codecDimitris Papastamos
This is mainly used by the soc-cache code to easily determine the currently used underlying serial bus. Set SND_SOC_CUSTOM to 1 so we can distinguish it if it is not initialized or set. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: soc-cache: Introduce raw bulk write supportDimitris Papastamos
As it has become more common to have to write firmware or similar large chunks of data to the hardware, add a function to perform raw bulk writes that bypass the cache. This only handles volatile registers as we should avoid getting out of sync with the actual cache. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: soc-cache: Factor-out the I2C read codeDimitris Papastamos
The handling of all snd_soc_x_y_read_i2c() functions is similar. Make a generic I2C read function and update all callers to use it. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26ASoC: imx: remove superfluous code in imx-ssi.cWolfram Sang
Checking if IMX_SSI_DMA is set and then set it again is useless. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-26Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-03-26ASoC: imx: fix burstsize for DMAWolfram Sang
SSI counts in words, the DMA engine in bytes. (Wrong) factor got removed in bf974a0 (ASoC i.MX: switch to new DMA api). Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-26ASoC: imx: set watermarks for mx2-dmaWolfram Sang
They got accidently removed by f0fba2a (ASoC: multi-component - ASoC Multi-Component Support). Reintroduce them and get rid of the superfluous defines because the fiq-driver has its own hardcoded values. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-23ASoC: Explicitly say registerless widgets have no registerMark Brown
This stops code that handles widgets generically from attempting to access registers for these widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-22ASoC: Add WM8958 enhanced EQ supportMark Brown
DSP2 in the WM8958 can be used to support an upgraded EQ for use in demanding applications. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-22ASoC: Add WM8958 VSS supportMark Brown
With appropriate firmware the WM8958 can support Virtual Surround Sound or VSS, widening the stereo audio image for improved user experience. Enable support for this mode of operation when the appropriate firmware can be loaded at runtime. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-22ASoC: Refactor WM8958 DSP to support additional algorithmsMark Brown
In preparation for the addition of additional WM8958 algorithms reorganise the code to make it easier to add such support later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-22ASoC: Support download of WM8958 MBC firmwareMark Brown
Allow userspace to supply an update to the ROM firmware. The firmware request is non-blocking so userspace can load the firmware at its leisure without delaying startup, the driver will begin using the firmware the next time MBC is started after it has been supplied. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-22ASoC: Support !REGULATOR build for sgtl5000Mark Brown
The regulator is optional depending on board design. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Mark WM8958 DSP2 registers readableMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Handle startup sequencing of WM8958 DSP2 with deferred clockingMark Brown
The DSP2 startup requires that the clock be enable so if we've deferred clock startup we need to defer DSP2 startup Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Factor WM8958 DSP2 handling into separate fileMark Brown
DSP2 on the WM8958 has a default ROM which provides a multi-band compressor for enhanced performance on mobile devices but can also support runtime download of alternative firmware. In preparation for more exploiting this functionality refactor the code to split the handling of DSP2 into a separate file. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Treat WM8958 revision A as WM8994 revision DMark Brown
The first WM8958 revision requires similar treatment. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18ASoC: Remove bogus check for register validity in debugfs writeMark Brown
Since not all registers need to be cached and the cache is entirely optional anyway we shouldn't be checking that a register is in the cached range. If the register is invalid then the actual I/O code can determine that and report an error. Similarly, the step size can and should be enforced by the lower level code if it's important. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18Merge branch 'topic/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.39
2011-03-16Merge branch 'for-2.6.39' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2011-03-11ASoC: mini2440: Fix uda134x codec problem.Marek Belisko
ASoC audio for mini2440 platform in current kenrel doesn't work. First problem is samsung_asoc_dma device is missing in initialization. Next problem is with codec. Codec is initialized but never probed because no platform_device exist for codec driver. It leads to errors during codec binding to asoc dai. Next problem was platform data which was passed from board to asoc main driver but not passed to codec when called codec_soc_probe(). Following patch should fix issues. But not sure if in correct way. Please review. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-11ASoC: Fix spacing in MAX8950Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-11ASoC: PXA: Z2: Fix codec pin nameVasily Khoruzhick
MONO was renamed to MONO1. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-11ASoC: PXA: z2: Mute internal speaker when headphones are connectedVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v0.10.2 at 2024-09-18 05:25:46 (GMT)