summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-04libcxgbi: Use flowi4's saddr in cxgbi_check_route().David S. Miller
Instead of rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04pptp: Use flowi4's daddr/saddr in pptp_xmit().David S. Miller
Instead of rt->rt_{src,dst} Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04ipv4: Make caller provide on-stack flow key to ip_route_output_ports().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04dccp: Use flowi4->saddr in dccp_v4_connect()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04ipv4: Renamt struct rtable's rt_tos to rt_key_tos.David S. Miller
To more accurately reflect that it is purely a routing cache lookup key and is used in no other context. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-04ipv4: Rework ipmr_rt_fib_lookup() flow key initialization.David S. Miller
Use information from the skb as much as possible, currently this means daddr, saddr, and TOS. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-03net/stmmac: Move "#include <linux/platform_device.h>" to linux/stmmac.hViresh KUMAR
stmmac.h uses struct platform_device and doesn't include <linux/platform_device.h>. Whereas drivers/net/stmmac/stmmac.h includes it, but doesn't directly use it. And so we get following compilation warning while using this file: warning: ‘struct platform_device’ declared inside parameter list This patch includes <linux/platform_device.h> in linux/stmmac.h and removes it from drivers/net/stmmac/stmmac.h Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-02net: dont hold rtnl mutex during netlink dump callbacksEric Dumazet
Four years ago, Patrick made a change to hold rtnl mutex during netlink dump callbacks. I believe it was a wrong move. This slows down concurrent dumps, making good old /proc/net/ files faster than rtnetlink in some situations. This occurred to me because one "ip link show dev ..." was _very_ slow on a workload adding/removing network devices in background. All dump callbacks are able to use RCU locking now, so this patch does roughly a revert of commits : 1c2d670f366 : [RTNETLINK]: Hold rtnl_mutex during netlink dump callbacks 6313c1e0992 : [RTNETLINK]: Remove unnecessary locking in dump callbacks This let writers fight for rtnl mutex and readers going full speed. It also takes care of phonet : phonet_route_get() is now called from rcu read section. I renamed it to phonet_route_get_rcu() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Remi Denis-Courmont <remi.denis-courmont@nokia.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-02Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-mergeDavid S. Miller
2011-05-02ipv4: Make sure flowi4->{saddr,daddr} are always set.David S. Miller
Slow path output route resolution always makes sure that ->{saddr,daddr} are set, and also if we trigger into IPSEC resolution we initialize them as well, because xfrm_lookup() expects them to be fully resolved. But if we hit the fast path and flowi4->flowi4_proto is zero, we won't do this initialization. Therefore, move the IPSEC path initialization to the route cache lookup fast path to make sure these are always set. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-01batman-adv: Make bat_priv->primary_if an rcu protected pointerMarek Lindner
The rcu protected macros rcu_dereference() and rcu_assign_pointer() for the bat_priv->primary_if need to be used, as well as spin/rcu locking. Otherwise we might end up using a primary_if pointer pointing to already freed memory. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-01batman-adv: fix gw_node_update() and gw_election()Antonio Quartulli
This is a regression from c4aac1ab9b973798163b34939b522f01e4d28ac9 - gw_node_update() doesn't add a new gw_node in case of empty curr_gw. This means that at the beginning no gw_node is added, leading to an empty gateway list. - gw_election() is terminating in case of curr_gw == NULL. It has to terminate in case of curr_gw != NULL Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-01batman-adv: Move definition of atomic_dec_not_zero() into main.hAntonio Quartulli
atomic_dec_not_zero() is very useful and it is currently defined multiple times. So it is possible to move it in main.h Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-01batman-adv: orig_hash_find() manages rcu_lock/unlock internallyAntonio Quartulli
orig_hash_find() manages rcu_lock/unlock internally and doesn't need to be surrounded by rcu_read_lock() / rcu_read_unlock() anymore Signed-off-by: Antonio Quartulli <ordex@autistici.org> Acked-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-29net/igb/e1000/e1000e: more robust ethtool duplex/speed configurationDavid Decotigny
This makes sure that one cannot request a 99Mbps full-duplex and get a 100Mbps half-duplex configuration in return due to the way the speed/duplex parameters are handled internally. Tested: e1000 works Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29tulip/de2104x: don't report different speeds depending on port typeDavid Decotigny
Initial driver reported different speeds depending on the port being used. This advertises the speed to be 10Mbps in any case, which is what it actually is on the wire. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29acenic: Fix using the specified speed when configuring NICDavid Decotigny
This tells the NIC to take the speed specified by ethtool into account when configuring the NIC, instead of keeping the previous speed. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ethtool: cosmetic: Use ethtool ethtool_cmd_speed APIDavid Decotigny
This updates the network drivers so that they don't access the ethtool_cmd::speed field directly, but use ethtool_cmd_speed() instead. For most of the drivers, these changes are purely cosmetic and don't fix any problem, such as for those 1GbE/10GbE drivers that indirectly call their own ethtool get_settings()/mii_ethtool_gset(). The changes are meant to enforce code consistency and provide robustness with future larger throughputs, at the expense of a few CPU cycles for each ethtool operation. All drivers compiled with make allyesconfig ion x86_64 have been updated. Tested: make allyesconfig on x86_64 + e1000e/bnx2x work Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ethtool: Use full 32 bit speed range in ethtool's set_settingsDavid Decotigny
This makes sure the ethtool's set_settings() callback of network drivers don't ignore the 16 most significant bits when ethtool calls their set_settings(). All drivers compiled with make allyesconfig on x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ethtool: Call ethtool's get/set_settings callbacks with cleaned dataDavid Decotigny
This makes sure that when a driver calls the ethtool's get/set_settings() callback of another driver, the data passed to it is clean. This guarantees that speed_hi will be zeroed correctly if the called callback doesn't explicitely set it: we are sure we don't get a corrupted speed from the underlying driver. We also take care of setting the cmd field appropriately (ETHTOOL_GSET/SSET). This applies to dev_ethtool_get_settings(), which now makes sure it sets up that ethtool command parameter correctly before passing it to drivers. This also means that whoever calls dev_ethtool_get_settings() does not have to clean the ethtool command parameter. This function also becomes an exported symbol instead of an inline. All drivers visible to make allyesconfig under x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ethtool: cosmetics: enforce const-ness in ethtool_cmd_speedDavid Decotigny
The 'ep' argument of ethtool_cmd_speed is not altered: advertise it in protoype. +Indentation fix. Also add comments to advise using the ethtool_cmd_speed API to get/set the link speed. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29qlcnic: Support for GBE port settingsSony Chacko
Enable setting speed and auto negotiation parameters for GbE ports. Hardware do not support half duplex setting currently. o Update driver version to 5.0.17. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29qlcnic: support rcv ring configuration through ethtoolSucheta Chakraborty
o Support ethtool command ETHTOOL_GCHANNELS and ETHTOOL_SCHANNELS. o Number of rcv rings configuration depend upon number of msix vector. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4, ipv6, bonding: Restore control over number of peer notificationsBen Hutchings
For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29pktgen: create num frags requestedamit salecha
Pktgen doesn't generate number of frags requested. Divide packet size by number of frags and fill that in every frags. Example: With packet size 1470, it generate only 11 frags. Initial frags get lenght 706, 353, 177....so on. Last frag get divided by 2. Now with this fix, each frags will get 78 bytes. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29bpf: depends on MODULESEric Dumazet
module_alloc() and module_free() are available only if CONFIG_MODULES=y Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Get route daddr from flow key in l2tp_ip_connect().David S. Miller
Now that output route lookups update the flow with destination address selection, we can fetch it from fl4->daddr instead of rt->rt_dst Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Get route daddr from flow key in tcp_v4_connect().David S. Miller
Now that output route lookups update the flow with destination address selection, we can fetch it from fl4->daddr instead of rt->rt_dst Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Get route daddr from flow key in inet_csk_route_req().David S. Miller
Now that output route lookups update the flow with destination address selection, we can fetch it from fl4->daddr instead of rt->rt_dst Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Get route daddr from flow key in ip4_datagram_connect().David S. Miller
Now that output route lookups update the flow with destination address selection, we can fetch it from fl4->daddr instead of rt->rt_dst Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Get route daddr from flow key in dccp_v4_connect().David S. Miller
Now that output route lookups update the flow with destination address selection, we can fetch it from fl4->daddr instead of rt->rt_dst Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Fetch route saddr from flow key in l2tp_ip_connect().David S. Miller
Now that output route lookups update the flow with source address selection, we can fetch it from fl4->saddr instead of rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Fetch route saddr from flow key in tcp_v4_connect().David S. Miller
Now that output route lookups update the flow with source address selection, we can fetch it from fl4->saddr instead of rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Fetch route saddr from flow key in ip4_datagram_connect().David S. Miller
Now that output route lookups update the flow with source address selection, we can fetch it from fl4->saddr instead of rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Fetch route saddr from flow key in inet_sk_reselect_saddr().David S. Miller
Now that output route lookups update the flow with source address selection, we can fetch it from fl4->saddr instead of rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Remove now superfluous code in ip_route_connect().David S. Miller
Now that output route lookups update the flow with source address et al. selections, the fl4->{saddr,daddr} assignments here are no longer necessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ipv4: Use caller's on-stack flowi as-is in output route lookups.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29net: Use non-zero allocations in dst_alloc().David S. Miller
Make dst_alloc() and it's users explicitly initialize the entire entry. The zero'ing done by kmem_cache_zalloc() was almost entirely redundant. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29net: Make dst_alloc() take more explicit initializations.David S. Miller
Now the dst->dev, dev->obsolete, and dst->flags values can be specified as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28l2tp: Fix inet_opt conversion.David S. Miller
We don't actually hold the socket lock at this point, so the rcu_dereference_protected() isn't' correct. Thanks to Eric Dumazet for pointing this out. Thankfully, we're only interested in fetching the faddr value if srr is enabled, so we can simply make this an RCU sequence and use plain rcu_dereference(). Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: ibmveth: force reconfiguring checksum settings on startupMichał Mirosław
Commit b9367bf3ee6d ("net: ibmveth: convert to hw_features") accidentally removed call to ibmveth_set_csum_offload() in ibmveth_probe(). Put the call back where it was, but with additional error checking provided by ibmveth_set_features(). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [sfr: dev -> netdev] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28qlcnic: fix memory leak in qlcnic_blink_led.Sucheta Chakraborty
o Memory allocated in ETHTOOL_ACTIVE mode, is not getting freed. So, in ETHTOOL_ID_INACTIVE mode, return after freeing allocated memory. o Using set bit instead of blink_down field, as it is also required in internal Loopback test and etc. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28tg3: Convert u32 flag,flg2,flg3 uses to bitmapJoe Perches
Using a bitmap instead of separate u32 flags allows a consistent, simpler and more extensible mechanism to determine capabilities. Convert bitmasks to enum. Add tg3_flag, tg3_flag_clear and tg3_flag_set. Convert the flag & bitmask tests. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: allow user to change NETIF_F_HIGHDMAMichał Mirosław
NETIF_F_HIGHDMA is like any other TX offloads, so allow user to toggle it. This is needed later for bridge and bonding convertsion to hw_features. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28bridge: convert br_features_recompute() to ndo_fix_featuresMichał Mirosław
Note: netdev_update_features() needs only rtnl_lock as br->port_list is only changed while holding it. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: fix netdev_increment_features()Michał Mirosław
Simplify and fix netdev_increment_features() to conform to what is stated in netdevice.h comments about NETIF_F_ONE_FOR_ALL. Include FCoE segmentation and VLAN-challedged flags in computation. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net:use help function of skb_checksum_start_offset to calculate offsetShan Wei
Although these are equivalent, but the skb_checksum_start_offset() is more readable. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28inet: add RCU protection to inet->optEric Dumazet
We lack proper synchronization to manipulate inet->opt ip_options Problem is ip_make_skb() calls ip_setup_cork() and ip_setup_cork() possibly makes a copy of ipc->opt (struct ip_options), without any protection against another thread manipulating inet->opt. Another thread can change inet->opt pointer and free old one under us. Use RCU to protect inet->opt (changed to inet->inet_opt). Instead of handling atomic refcounts, just copy ip_options when necessary, to avoid cache line dirtying. We cant insert an rcu_head in struct ip_options since its included in skb->cb[], so this patch is large because I had to introduce a new ip_options_rcu structure. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: filter: Just In Time compiler for x86-64Eric Dumazet
In order to speedup packet filtering, here is an implementation of a JIT compiler for x86_64 It is disabled by default, and must be enabled by the admin. echo 1 >/proc/sys/net/core/bpf_jit_enable It uses module_alloc() and module_free() to get memory in the 2GB text kernel range since we call helpers functions from the generated code. EAX : BPF A accumulator EBX : BPF X accumulator RDI : pointer to skb (first argument given to JIT function) RBP : frame pointer (even if CONFIG_FRAME_POINTER=n) r9d : skb->len - skb->data_len (headlen) r8 : skb->data To get a trace of generated code, use : echo 2 >/proc/sys/net/core/bpf_jit_enable Example of generated code : # tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24 flen=18 proglen=147 pass=3 image=ffffffffa00b5000 JIT code: ffffffffa00b5000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 60 JIT code: ffffffffa00b5010: 44 2b 4f 64 4c 8b 87 b8 00 00 00 be 0c 00 00 00 JIT code: ffffffffa00b5020: e8 24 7b f7 e0 3d 00 08 00 00 75 28 be 1a 00 00 JIT code: ffffffffa00b5030: 00 e8 fe 7a f7 e0 24 00 3d 00 14 a8 c0 74 49 be JIT code: ffffffffa00b5040: 1e 00 00 00 e8 eb 7a f7 e0 24 00 3d 00 14 a8 c0 JIT code: ffffffffa00b5050: 74 36 eb 3b 3d 06 08 00 00 74 07 3d 35 80 00 00 JIT code: ffffffffa00b5060: 75 2d be 1c 00 00 00 e8 c8 7a f7 e0 24 00 3d 00 JIT code: ffffffffa00b5070: 14 a8 c0 74 13 be 26 00 00 00 e8 b5 7a f7 e0 24 JIT code: ffffffffa00b5080: 00 3d 00 14 a8 c0 75 07 b8 ff ff 00 00 eb 02 31 JIT code: ffffffffa00b5090: c0 c9 c3 BPF program is 144 bytes long, so native program is almost same size ;) (000) ldh [12] (001) jeq #0x800 jt 2 jf 8 (002) ld [26] (003) and #0xffffff00 (004) jeq #0xc0a81400 jt 16 jf 5 (005) ld [30] (006) and #0xffffff00 (007) jeq #0xc0a81400 jt 16 jf 17 (008) jeq #0x806 jt 10 jf 9 (009) jeq #0x8035 jt 10 jf 17 (010) ld [28] (011) and #0xffffff00 (012) jeq #0xc0a81400 jt 16 jf 13 (013) ld [38] (014) and #0xffffff00 (015) jeq #0xc0a81400 jt 16 jf 17 (016) ret #65535 (017) ret #0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27ipv4: Kill RTO_CONN.David S. Miller
It's not used by anything in the kernel, and defined in net/route.h so never exported to userspace. Therefore we can safely remove it. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-09-20 04:28:02 (GMT)