summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-06net: fec: fix compile with CONFIG_M5272Nikita Yushchenko
Commit 80cca775cdc4 ("net: fec: cache statistics while device is down") introduced unconditional statistics-related actions. However, when driver is compiled with CONFIG_M5272, staticsics-related definitions do not exist, which results into build errors. Fix that by adding explicit handling of !defined(CONFIG_M5272) case. Fixes: 80cca775cdc4 ("net: fec: cache statistics while device is down") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06be2net: Add DEVSEC privilege to SET_HSW_CONFIG command.Venkat Duvvuru
OPCODE_COMMON_GET_FN_PRIVILEGES is returning only DEVSEC privilege (Unrestricted Administrative Privilege) for Lancer NIC functions. So, driver is failing SET_HSW_CONFIG command, as DEVSEC privilege was not set in the privilege bitmap. This patch fixes the problem by setting DEVSEC privilege in SET_HSW_CONFIG’s privilege bitmap. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06virtio-net: Fix DMA-from-the-stack in virtnet_set_mac_address()Andy Lutomirski
With CONFIG_VMAP_STACK=y, virtnet_set_mac_address() can be passed a pointer to the stack and it will OOPS. Copy the address to the heap to prevent the crash. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Reported-by: zbyszek@in.waw.pl Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06tcp: warn on bogus MSS and try to amend itMarcelo Ricardo Leitner
There have been some reports lately about TCP connection stalls caused by NIC drivers that aren't setting gso_size on aggregated packets on rx path. This causes TCP to assume that the MSS is actually the size of the aggregated packet, which is invalid. Although the proper fix is to be done at each driver, it's often hard and cumbersome for one to debug, come to such root cause and report/fix it. This patch amends this situation in two ways. First, it adds a warning on when this situation occurs, so it gives a hint to those trying to debug this. It also limit the maximum probed MSS to the adverised MSS, as it should never be any higher than that. The result is that the connection may not have the best performance ever but it shouldn't stall, and the admin will have a hint on what to look for. Tested with virtio by forcing gso_size to 0. v2: updated msg per David's suggestion v3: use skb_iif to find the interface and also log its name, per Eric Dumazet's suggestion. As the skb may be backlogged and the interface gone by then, we need to check if the number still has a meaning. v4: use helper tcp_gro_dev_warn() and avoid pr_warn_once inside __once, per David's suggestion Cc: Jonathan Maxwell <jmaxwell37@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06uapi glibc compat: fix outer guard of net device flags enumJonas Gorski
Fix a wrong condition preventing the higher net device flags IFF_LOWER_UP etc to be defined if net/if.h is included before linux/if.h. The comment makes it clear the intention was to allow partial definition with either parts. This fixes compilation of userspace programs trying to use IFF_LOWER_UP, IFF_DORMANT or IFF_ECHO. Fixes: 4a91cb61bb99 ("uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: stmmac: clear reset value of snps, wr_osr_lmt/snps, rd_osr_lmt before ↵Niklas Cassel
writing WR_OSR_LMT and RD_OSR_LMT have a reset value of 1. Since the reset value wasn't cleared before writing, the value in the register would be incorrect if specifying an uneven value for snps,wr_osr_lmt/snps,rd_osr_lmt. Zero is a valid value for the properties, since the databook specifies: maximum outstanding requests = WR_OSR_LMT + 1. We do not want to change the behavior for existing users when the property is missing. Therefore, default to 1 if the property is missing, since that is the same as the reset value. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06netlink: Do not schedule work from sk_destructHerbert Xu
It is wrong to schedule a work from sk_destruct using the socket as the memory reserve because the socket will be freed immediately after the return from sk_destruct. Instead we should do the deferral prior to sk_free. This patch does just that. Fixes: 707693c8a498 ("netlink: Call cb->done from a worker thread") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06uapi: export nf_log.hstephen hemminger
File is in uapi directory but not being copied on make install_headers Fixes commit 4ec9c8fbbc22 ("netfilter: nft_log: complete NFTA_LOG_FLAGS attr support"). Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06uapi: export tc_skbmod.hstephen hemminger
Fixes commit 735cffe5d800 ("net_sched: Introduce skbmod action") Not used by iproute2 but maybe in future. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: ep93xx_eth: Do not crash unloading moduleFlorian Fainelli
When we unload the ep93xx_eth, whether we have opened the network interface or not, we will either hit a kernel paging request error, or a simple NULL pointer de-reference because: - if ep93xx_open has been called, we have created a valid DMA mapping for ep->descs, when we call ep93xx_stop, we also call ep93xx_free_buffers, ep->descs now has a stale value - if ep93xx_open has not been called, we have a NULL pointer for ep->descs, so performing any operation against that address just won't work Fix this by adding a NULL pointer check for ep->descs which means that ep93xx_free_buffers() was able to successfully tear down the descriptors and free the DMA cookie as well. Fixes: 1d22e05df818 ("[PATCH] Cirrus Logic ep93xx ethernet driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05Merge branch 'bnx2x-fixes'David S. Miller
Yuval Mintz says: ==================== bnx2x: fixes series Two unrelated fixes for bnx2x - the first one is nice-to-have, while the other fixes fatal behaviour in older adapters. Please consider applying them to `net'. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05bnx2x: Prevent tunnel config for 577xxMintz, Yuval
Only the 578xx adapters are capable of configuring UDP ports for the purpose of tunnelling - doing the same on 577xx might lead to a firmware assertion. We're already not claiming support for any related feature for such devices, but we also need to prevent the configuration of the UDP ports to the device in this case. Fixes: f34fa14cc033 ("bnx2x: Add vxlan RSS support") Reported-by: Anikina Anna <anikina@gmail.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05bnx2x: Correct ringparam estimate when DOWNMintz, Yuval
Until interface is up [and assuming ringparams weren't explicitly configured] when queried for the size of its rings bnx2x would claim they're the maximal size by default. That is incorrect as by default the maximal number of buffers would be equally divided between the various rx rings. This prevents the user from actually setting the number of elements on each rx ring to be of maximal size prior to transitioning the interface into up state. To fix this, make a rough estimation about the number of buffers. It wouldn't always be accurate, but it would be much better than current estimation and would allow users to increase number of buffers during early initialization of the interface. Reported-by: Seymour, Shane <shane.seymour@hpe.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05isdn: hisax: set error code on failurePan Bian
In function hfc4s8s_probe(), the value of return variable err should be negative on failures. However, when the call to request_region() returns NULL, the value of err is 0. This patch fixes the bug, assigning "-EBUSY" to err on the path that request_region() fails. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188931 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: bnx2x: fix improper return valuePan Bian
Macro BNX2X_ALLOC_AND_SET(arr, lbl, func) calls kmalloc() to allocate memory, and jumps to label "lbl" if the allocation fails. Label "lbl" first cleans memory and then returns variable rc. Before calling the macro, the value of variable rc is 0. Because 0 means no error, the callers of bnx2x_init_firmware() may be misled. This patch fixes the bug, assigning "-ENOMEM" to rc before calling macro NX2X_ALLOC_AND_SET(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189141 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: ethernet: qlogic: set error code on failurePan Bian
When calling dma_mapping_error(), the value of return variable rc is 0. And when the call returns an unexpected value, rc is not set to a negative errno. Thus, it will return 0 on the error path, and its callers cannot detect the bug. This patch fixes the bug, assigning "-ENOMEM" to err. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189041 Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05atm: fix improper return valuePan Bian
It returns variable "error" when ioremap_nocache() returns a NULL pointer. The value of "error" is 0 then, which will mislead the callers to believe that there is no error. This patch fixes the bug, returning "-ENOMEM". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189021 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: irda: set error code on failuresPan Bian
When the calls to kzalloc() fail, the value of return variable ret may be 0. 0 means success in this context. This patch fixes the bug, assigning "-ENOMEM" to ret before calling kzalloc(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188971 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: caif: remove ineffective checkPan Bian
The check of the return value of sock_register() is ineffective. "if(!err)" seems to be a typo. It is better to propagate the error code to the callers of caif_sktinit_module(). This patch removes the check statment and directly returns the result of sock_register(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188751 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: ping: check minimum size on ICMP header lengthKees Cook
Prior to commit c0371da6047a ("put iov_iter into msghdr") in v3.19, there was no check that the iovec contained enough bytes for an ICMP header, and the read loop would walk across neighboring stack contents. Since the iov_iter conversion, bad arguments are noticed, but the returned error is EFAULT. Returning EINVAL is a clearer error and also solves the problem prior to v3.19. This was found using trinity with KASAN on v3.18: BUG: KASAN: stack-out-of-bounds in memcpy_fromiovec+0x60/0x114 at addr ffffffc071077da0 Read of size 8 by task trinity-c2/9623 page:ffffffbe034b9a08 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() page dumped because: kasan: bad access detected CPU: 0 PID: 9623 Comm: trinity-c2 Tainted: G BU 3.18.0-dirty #15 Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT) Call trace: [<ffffffc000209c98>] dump_backtrace+0x0/0x1ac arch/arm64/kernel/traps.c:90 [<ffffffc000209e54>] show_stack+0x10/0x1c arch/arm64/kernel/traps.c:171 [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffc000f18dc4>] dump_stack+0x7c/0xd0 lib/dump_stack.c:50 [< inline >] print_address_description mm/kasan/report.c:147 [< inline >] kasan_report_error mm/kasan/report.c:236 [<ffffffc000373dcc>] kasan_report+0x380/0x4b8 mm/kasan/report.c:259 [< inline >] check_memory_region mm/kasan/kasan.c:264 [<ffffffc00037352c>] __asan_load8+0x20/0x70 mm/kasan/kasan.c:507 [<ffffffc0005b9624>] memcpy_fromiovec+0x5c/0x114 lib/iovec.c:15 [< inline >] memcpy_from_msg include/linux/skbuff.h:2667 [<ffffffc000ddeba0>] ping_common_sendmsg+0x50/0x108 net/ipv4/ping.c:674 [<ffffffc000dded30>] ping_v4_sendmsg+0xd8/0x698 net/ipv4/ping.c:714 [<ffffffc000dc91dc>] inet_sendmsg+0xe0/0x12c net/ipv4/af_inet.c:749 [< inline >] __sock_sendmsg_nosec net/socket.c:624 [< inline >] __sock_sendmsg net/socket.c:632 [<ffffffc000cab61c>] sock_sendmsg+0x124/0x164 net/socket.c:643 [< inline >] SYSC_sendto net/socket.c:1797 [<ffffffc000cad270>] SyS_sendto+0x178/0x1d8 net/socket.c:1761 CVE-2016-8399 Reported-by: Qidan He <i@flanker017.me> Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05atm: lanai: set error code when ioremap failsPan Bian
In function lanai_dev_open(), when the call to ioremap() fails, the value of return variable result is 0. 0 means no error in this context. This patch fixes the bug, assigning "-ENOMEM" to result when ioremap() returns a NULL pointer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188791 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: usb: set error code when usb_alloc_urb failsPan Bian
In function lan78xx_probe(), variable ret takes the errno code on failures. However, when the call to usb_alloc_urb() fails, its value will keeps 0. 0 indicates success in the context, which is inconsistent with the execution result. This patch fixes the bug, assigning "-ENOMEM" to ret when usb_alloc_urb() returns a NULL pointer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188771 Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: bridge: set error code on failurePan Bian
Function br_sysfs_addbr() does not set error code when the call kobject_create_and_add() returns a NULL pointer. It may be better to return "-ENOMEM" when kobject_create_and_add() fails. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188781 Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: af_mpls.c add space before open parenthesisSuraj Deshmukh
Adding space after switch keyword before open parenthesis for readability purpose. This patch fixes the checkpatch.pl warning: space required before the open parenthesis '(' Signed-off-by: Suraj Deshmukh <surajssd009005@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05netdev: broadcom: propagate error codePan Bian
Function bnxt_hwrm_stat_ctx_alloc() always returns 0, even if the call to _hwrm_send_message() fails. It may be better to propagate the errors to the caller of bnxt_hwrm_stat_ctx_alloc(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188661 Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05Merge branch 'fib-suffix-length-fixes'David S. Miller
Alexander Duyck says: ==================== IPv4 FIB suffix length fixes In reviewing the patch from Robert Shearman and looking over the code I realized there were a few different bugs we were still carrying in the IPv4 FIB lookup code. These two patches are based off of Robert's original patch, but take things one step further by splitting them up to address two additional issues I found. So first have Robert's original patch which was addressing the fact that us calling update_suffix in resize is expensive when it is called per add. To address that I incorporated the core bit of the patch which was us dropping the update_suffix call from resize. The first patch in the series does a rename and fix on the push_suffix and pull_suffix code. Specifically we drop the need to pass a leaf and secondly we fix things so we pull the suffix as long as the value of the suffix in the node is dropping. The second patch addresses the original issue reported as well as optimizing the code for the fact that update_suffix is only really meant to go through and clean things up when we are decreasing a suffix. I had originally added code for it to somehow cause an increase, but if we push the suffix when a new leaf is added we only ever have to handle pulling down the suffix with update_suffix so I updated the code to reflect that. As far as side effects the only ones I think that will be obvious should be the fact that some routes may be able to be found earlier since before we relied on resize to update the suffix lengths, and now we are updating them before we add or remove the leaf. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05ipv4: Drop suffix update from resize codeAlexander Duyck
It has been reported that update_suffix can be expensive when it is called on a large node in which most of the suffix lengths are the same. The time required to add 200K entries had increased from around 3 seconds to almost 49 seconds. In order to address this we need to move the code for updating the suffix out of resize and instead just have it handled in the cases where we are pushing a node that increases the suffix length, or will decrease the suffix length. Fixes: 5405afd1a306 ("fib_trie: Add tracking value for suffix length") Reported-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Robert Shearman <rshearma@brocade.com> Tested-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05ipv4: Drop leaf from suffix pull/push functionsAlexander Duyck
It wasn't necessary to pass a leaf in when doing the suffix updates so just drop it. Instead just pass the suffix and work with that. Since we dropped the leaf there is no need to include that in the name so the names are updated to node_push_suffix and node_pull_suffix. Finally I noticed that the logic for pulling the suffix length back actually had some issues. Specifically it would stop prematurely if there was a longer suffix, but it was not as long as the original suffix. I updated the code to address that in node_pull_suffix. Fixes: 5405afd1a306 ("fib_trie: Add tracking value for suffix length") Suggested-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Robert Shearman <rshearma@brocade.com> Tested-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-04net: dcb: set error code on failuresPan Bian
In function dcbnl_cee_fill(), returns the value of variable err on errors. However, on some error paths (e.g. nla put fails), its value may be 0. It may be better to explicitly set a negative errno to variable err before returning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188881 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03Merge tag 'batadv-net-for-davem-20161202' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here is another batman-adv bugfix: - fix checking for failed allocation of TVLV blocks in TT local data, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This should be the last set of bugfixes for arm-soc in v4.9. None of these are critical regressions, but it would be nice to still get them merged. - On the Juno platform, the idle latency was described wrong, leading to suboptimal cpuidle tuning. - Also on the same platform, PCI I/O space was set up incorrectly and could not work. - On the sti platform, a syntactically incorrect DT entry caused warnings. - The newly added 'gr8' platform has somewhat confusing file names, which we rename for consistency" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions arm64: dts: juno: Correct PCI IO window ARM: dts: STiH407-family: fix i2c nodes ARM: gr8: Rename the DTSI and relevant DTS
2016-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Lots more phydev and probe error path leaks in various drivers by Johan Hovold. 2) Fix race in packet_set_ring(), from Philip Pettersson. 3) Use after free in dccp_invalid_packet(), from Eric Dumazet. 4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric Dumazet. 5) When tunneling between ipv4 and ipv6 we can be left with the wrong skb->protocol value as we enter the IPSEC engine and this causes all kinds of problems. Set it before the output path does any dst_output() calls, from Eli Cooper. 6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from Florian Fainelli. 7) Various netfilter nat bug fixes from FLorian Westphal. 8) Fix memory leak in ipvlan_link_new(), from Gao Feng. 9) Locking fixes, particularly wrt. socket lookups, in l2tp from Guillaume Nault. 10) Avoid invoking rhash teardowns in atomic context by moving netlink cb->done() dump completion from a worker thread. Fix from Herbert Xu. 11) Buffer refcount problems in tun and macvtap on errors, from Jason Wang. 12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user selects BBR. Fix from Julian Wollrath. 13) Fix deadlock in transmit path on altera TSE driver, from Lino Sanfilippo. 14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita Yushchenko. 15) tc_tunnel_key needs to be properly exported to userspace via uapi, fix from Roi Dayan. 16) rds_tcp_init_net() doesn't unregister notifier in error path, fix from Sowmini Varadhan. 17) Stale packet header pointer access after pskb_expand_head() in genenve driver, fix from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits) net: avoid signed overflows for SO_{SND|RCV}BUFFORCE geneve: avoid use-after-free of skb->data tipc: check minimum bearer MTU net: renesas: ravb: unintialized return value sh_eth: remove unchecked interrupts for RZ/A1 net: bcmgenet: Utilize correct struct device for all DMA operations NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040 cdc_ether: Fix handling connection notification ip6_offload: check segs for NULL in ipv6_gso_segment. RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()" ipv6: Set skb->protocol properly for local output ipv4: Set skb->protocol properly for local output packet: fix race condition in packet_set_ring net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks net: ethernet: stmmac: platform: fix outdated function header net: ethernet: stmmac: dwmac-meson8b: fix probe error path net: ethernet: stmmac: dwmac-generic: fix probe error path ...
2016-12-02net: avoid signed overflows for SO_{SND|RCV}BUFFORCEEric Dumazet
CAP_NET_ADMIN users should not be allowed to set negative sk_sndbuf or sk_rcvbuf values, as it can lead to various memory corruptions, crashes, OOM... Note that before commit 82981930125a ("net: cleanups in sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF and SO_RCVBUF were vulnerable. This needs to be backported to all known linux kernels. Again, many thanks to syzkaller team for discovering this gem. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02geneve: avoid use-after-free of skb->dataSabrina Dubroca
geneve{,6}_build_skb can end up doing a pskb_expand_head(), which makes the ip_hdr(skb) reference we stashed earlier stale. Since it's only needed as an argument to ip_tunnel_ecn_encap(), move this directly in the function call. Fixes: 08399efc6319 ("geneve: ensure ECN info is handled properly in all tx/rx paths") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02tipc: check minimum bearer MTUMichal Kubeček
Qian Zhang (张谦) reported a potential socket buffer overflow in tipc_msg_build() which is also known as CVE-2016-8632: due to insufficient checks, a buffer overflow can occur if MTU is too short for even tipc headers. As anyone can set device MTU in a user/net namespace, this issue can be abused by a regular user. As agreed in the discussion on Ben Hutchings' original patch, we should check the MTU at the moment a bearer is attached rather than for each processed packet. We also need to repeat the check when bearer MTU is adjusted to new device MTU. UDP case also needs a check to avoid overflow when calculating bearer MTU. Fixes: b97bf3fd8f6a ("[TIPC] Initial merge") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reported-by: Qian Zhang (张谦) <zhangqian-c@360.cn> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge tag 'linux-can-fixes-for-4.9-20161201' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-12-02 this is a pull request for net/master. There are two patches by Stephane Grosjean, who adds support for the new PCAN-USB X6 USB interface to the pcan_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: renesas: ravb: unintialized return valueDan Carpenter
We want to set the other "err" variable here so that we can return it later. My version of GCC misses this issue but I caught it with a static checker. Fixes: 9f70eb339f52 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02sh_eth: remove unchecked interrupts for RZ/A1Chris Brandt
When streaming a lot of data and the RZ/A1 can't keep up, some status bits will get set that are not being checked or cleared which cause the following messages and the Ethernet driver to stop working. This patch fixes that issue. irq 21: nobody cared (try booting with the "irqpoll" option) handlers: [<c036b71c>] sh_eth_interrupt Disabling IRQ #21 Fixes: db893473d313a4ad ("sh_eth: Add support for r7s72100") Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: bcmgenet: Utilize correct struct device for all DMA operationsFlorian Fainelli
__bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the same struct device during unmap that was used for the map operation, which makes DMA-API debugging warn about it. Fix this by always using &priv->pdev->dev throughout the driver, using an identical device reference for all map/unmap calls. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Fix up a couple of field names in the CREDITS fileLinus Torvalds
Ozgur Karatas reported that the very first entry in the CREDITS file had the wrong tag for name (M: instead of N: - it happened when moving the entry from the MAINTAINERS file, where 'M:' stands for "Maintainer"). And when I went looking, I found a couple of other cases of wrong tagging too. Reported-by: Ozgur Karatas <mueddib@yandex.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-02NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040Daniele Palmas
This patch adds support for PID 0x1040 of Telit LE922A. The qmi adapter requires to have DTR set for proper working, so QMI_WWAN_QUIRK_DTR has been enabled. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02cdc_ether: Fix handling connection notificationKristian Evensen
Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") introduced a work-around in usbnet_cdc_status() for devices that exported cdc carrier on twice on connect. Before the commit, this behavior caused the link state to be incorrect. It was assumed that all CDC Ethernet devices would either export this behavior, or send one off and then one on notification (which seems to be the default behavior). Unfortunately, it turns out multiple devices sends a connection notification multiple times per second (via an interrupt), even when connection state does not change. This has been observed with several different USB LAN dongles (at least), for example 13b1:0041 (Linksys). After bfe9b9d2df66, the link state has been set as down and then up for each notification. This has caused a flood of Netlink NEWLINK messages and syslog to be flooded with messages similar to: cdc_ether 2-1:2.0 eth1: kevent 12 may have been dropped This commit fixes the behavior by reverting usbnet_cdc_status() to how it was before bfe9b9d2df66. The work-around has been moved to a separate status-function which is only called when a known, affect device is detected. v1->v2: * Do not open-code netif_carrier_ok() (thanks Henning Schild). * Call netif_carrier_off() instead of usb_link_change(). This prevents calling schedule_work() twice without giving the work queue a chance to be processed (thanks Bjørn Mork). Fixes: bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") Reported-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02ip6_offload: check segs for NULL in ipv6_gso_segment.Artem Savkov
segs needs to be checked for being NULL in ipv6_gso_segment() before calling skb_shinfo(segs), otherwise kernel can run into a NULL-pointer dereference: [ 97.811262] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc [ 97.819112] IP: [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0 [ 97.825214] PGD 0 [ 97.827047] [ 97.828540] Oops: 0000 [#1] SMP [ 97.831678] Modules linked in: vhost_net vhost macvtap macvlan nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bridge stp llc snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd snd_hda_core edac_core snd_hwdep kvm_amd snd_seq kvm snd_seq_device snd_pcm irqbypass snd_timer ppdev parport_serial snd parport_pc k10temp pcspkr soundcore parport sp5100_tco shpchp sg wmi i2c_piix4 acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod cdrom sd_mod ata_generic pata_acpi amdkfd amd_iommu_v2 radeon broadcom bcm_phy_lib i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci serio_raw tg3 firewire_ohci libahci pata_atiixp drm ptp libata firewire_core pps_core i2c_core crc_itu_t fjes dm_mirror dm_region_hash dm_log dm_mod [ 97.927721] CPU: 1 PID: 3504 Comm: vhost-3495 Not tainted 4.9.0-7.el7.test.x86_64 #1 [ 97.935457] Hardware name: AMD Snook/Snook, BIOS ESK0726A 07/26/2010 [ 97.941806] task: ffff880129a1c080 task.stack: ffffc90001bcc000 [ 97.947720] RIP: 0010:[<ffffffff816e52f9>] [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0 [ 97.956251] RSP: 0018:ffff88012fc43a10 EFLAGS: 00010207 [ 97.961557] RAX: 0000000000000000 RBX: ffff8801292c8700 RCX: 0000000000000594 [ 97.968687] RDX: 0000000000000593 RSI: ffff880129a846c0 RDI: 0000000000240000 [ 97.975814] RBP: ffff88012fc43a68 R08: ffff880129a8404e R09: 0000000000000000 [ 97.982942] R10: 0000000000000000 R11: ffff880129a84076 R12: 00000020002949b3 [ 97.990070] R13: ffff88012a580000 R14: 0000000000000000 R15: ffff88012a580000 [ 97.997198] FS: 0000000000000000(0000) GS:ffff88012fc40000(0000) knlGS:0000000000000000 [ 98.005280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.011021] CR2: 00000000000000cc CR3: 0000000126c5d000 CR4: 00000000000006e0 [ 98.018149] Stack: [ 98.020157] 00000000ffffffff ffff88012fc43ac8 ffffffffa017ad0a 000000000000000e [ 98.027584] 0000001300000000 0000000077d59998 ffff8801292c8700 00000020002949b3 [ 98.035010] ffff88012a580000 0000000000000000 ffff88012a580000 ffff88012fc43a98 [ 98.042437] Call Trace: [ 98.044879] <IRQ> [ 98.046803] [<ffffffffa017ad0a>] ? tg3_start_xmit+0x84a/0xd60 [tg3] [ 98.053156] [<ffffffff815eeee0>] skb_mac_gso_segment+0xb0/0x130 [ 98.059158] [<ffffffff815eefd3>] __skb_gso_segment+0x73/0x110 [ 98.064985] [<ffffffff815ef40d>] validate_xmit_skb+0x12d/0x2b0 [ 98.070899] [<ffffffff815ef5d2>] validate_xmit_skb_list+0x42/0x70 [ 98.077073] [<ffffffff81618560>] sch_direct_xmit+0xd0/0x1b0 [ 98.082726] [<ffffffff815efd86>] __dev_queue_xmit+0x486/0x690 [ 98.088554] [<ffffffff8135c135>] ? cpumask_next_and+0x35/0x50 [ 98.094380] [<ffffffff815effa0>] dev_queue_xmit+0x10/0x20 [ 98.099863] [<ffffffffa09ce057>] br_dev_queue_push_xmit+0xa7/0x170 [bridge] [ 98.106907] [<ffffffffa09ce161>] br_forward_finish+0x41/0xc0 [bridge] [ 98.113430] [<ffffffff81627cf2>] ? nf_iterate+0x52/0x60 [ 98.118735] [<ffffffff81627d6b>] ? nf_hook_slow+0x6b/0xc0 [ 98.124216] [<ffffffffa09ce32c>] __br_forward+0x14c/0x1e0 [bridge] [ 98.130480] [<ffffffffa09ce120>] ? br_dev_queue_push_xmit+0x170/0x170 [bridge] [ 98.137785] [<ffffffffa09ce4bd>] br_forward+0x9d/0xb0 [bridge] [ 98.143701] [<ffffffffa09cfbb7>] br_handle_frame_finish+0x267/0x560 [bridge] [ 98.150834] [<ffffffffa09d0064>] br_handle_frame+0x174/0x2f0 [bridge] [ 98.157355] [<ffffffff8102fb89>] ? sched_clock+0x9/0x10 [ 98.162662] [<ffffffff810b63b2>] ? sched_clock_cpu+0x72/0xa0 [ 98.168403] [<ffffffff815eccf5>] __netif_receive_skb_core+0x1e5/0xa20 [ 98.174926] [<ffffffff813659f9>] ? timerqueue_add+0x59/0xb0 [ 98.180580] [<ffffffff815ed548>] __netif_receive_skb+0x18/0x60 [ 98.186494] [<ffffffff815ee625>] process_backlog+0x95/0x140 [ 98.192145] [<ffffffff815edccd>] net_rx_action+0x16d/0x380 [ 98.197713] [<ffffffff8170cff1>] __do_softirq+0xd1/0x283 [ 98.203106] [<ffffffff8170b2bc>] do_softirq_own_stack+0x1c/0x30 [ 98.209107] <EOI> [ 98.211029] [<ffffffff8108a5c0>] do_softirq+0x50/0x60 [ 98.216166] [<ffffffff815ec853>] netif_rx_ni+0x33/0x80 [ 98.221386] [<ffffffffa09eeff7>] tun_get_user+0x487/0x7f0 [tun] [ 98.227388] [<ffffffffa09ef3ab>] tun_sendmsg+0x4b/0x60 [tun] [ 98.233129] [<ffffffffa0b68932>] handle_tx+0x282/0x540 [vhost_net] [ 98.239392] [<ffffffffa0b68c25>] handle_tx_kick+0x15/0x20 [vhost_net] [ 98.245916] [<ffffffffa0abacfe>] vhost_worker+0x9e/0xf0 [vhost] [ 98.251919] [<ffffffffa0abac60>] ? vhost_umem_alloc+0x40/0x40 [vhost] [ 98.258440] [<ffffffff81003a47>] ? do_syscall_64+0x67/0x180 [ 98.264094] [<ffffffff810a44d9>] kthread+0xd9/0xf0 [ 98.268965] [<ffffffff810a4400>] ? kthread_park+0x60/0x60 [ 98.274444] [<ffffffff8170a4d5>] ret_from_fork+0x25/0x30 [ 98.279836] Code: 8b 93 d8 00 00 00 48 2b 93 d0 00 00 00 4c 89 e6 48 89 df 66 89 93 c2 00 00 00 ff 10 48 3d 00 f0 ff ff 49 89 c2 0f 87 52 01 00 00 <41> 8b 92 cc 00 00 00 48 8b 80 d0 00 00 00 44 0f b7 74 10 06 66 [ 98.299425] RIP [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0 [ 98.305612] RSP <ffff88012fc43a10> [ 98.309094] CR2: 00000000000000cc [ 98.312406] ---[ end trace 726a2c7a2d2d78d0 ]--- Signed-off-by: Artem Savkov <asavkov@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_netSowmini Varadhan
If some error is encountered in rds_tcp_init_net, make sure to unregister_netdevice_notifier(), else we could trigger a panic later on, when the modprobe from a netns fails. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"Eli Cooper
This reverts commit ae148b085876fa771d9ef2c05f85d4b4bf09ce0d ("ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"). skb->protocol is now set in __ip_local_out() and __ip6_local_out() before dst_output() is called. It is no longer necessary to do it for each tunnel. Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02ipv6: Set skb->protocol properly for local outputEli Cooper
When xfrm is applied to TSO/GSO packets, it follows this path: xfrm_output() -> xfrm_output_gso() -> skb_gso_segment() where skb_gso_segment() relies on skb->protocol to function properly. This patch sets skb->protocol to ETH_P_IPV6 before dst_output() is called, fixing a bug where GSO packets sent through an ipip6 tunnel are dropped when xfrm is involved. Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02ipv4: Set skb->protocol properly for local outputEli Cooper
When xfrm is applied to TSO/GSO packets, it follows this path: xfrm_output() -> xfrm_output_gso() -> skb_gso_segment() where skb_gso_segment() relies on skb->protocol to function properly. This patch sets skb->protocol to ETH_P_IP before dst_output() is called, fixing a bug where GSO packets sent through a sit tunnel are dropped when xfrm is involved. Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02packet: fix race condition in packet_set_ringPhilip Pettersson
When packet_set_ring creates a ring buffer it will initialize a struct timer_list if the packet version is TPACKET_V3. This value can then be raced by a different thread calling setsockopt to set the version to TPACKET_V1 before packet_set_ring has finished. This leads to a use-after-free on a function pointer in the struct timer_list when the socket is closed as the previously initialized timer will not be deleted. The bug is fixed by taking lock_sock(sk) in packet_setsockopt when changing the packet version while also taking the lock at the start of packet_set_ring. Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by: Philip Pettersson <philip.pettersson@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "All architectures avoid memory corruption in an error path. ARM prevents bogus acknowledgement of interrupts" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: use after free in kvm_ioctl_create_device() KVM: arm/arm64: vgic: Don't notify EOI for non-SPIs
2016-12-02Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Here is the revert for the regression of the i2c-octeon driver I mentioned last time. I wished for a bit more feedback, but all people working actively on it are in need of this patch, so here it goes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: octeon: thunderx: Limit register access retries"
generated by cgit v0.10.2 at 2024-07-26 00:29:02 (GMT)