summaryrefslogtreecommitdiff
path: root/Documentation/virtual
AgeCommit message (Collapse)Author
2015-06-05KVM: x86: mark legacy PCI device assignment as deprecatedPaolo Bonzini
Follow up to commit e194bbdf362ba7d53cfd23ba24f1a7c90ef69a74. Suggested-by: Bandan Das <bsd@redhat.com> Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05KVM: x86: add SMM to the MMU role, support SMRAM address spacePaolo Bonzini
This is now very simple to do. The only interesting part is a simple trick to find the right memslot in gfn_to_rmap, retrieving the address space from the spte role word. The same trick is used in the auditing code. The comment on top of union kvm_mmu_page_role has been stale forever, so remove it. Speaking of stale code, remove pad_for_nice_hex_output too: it was splitting the "access" bitfield across two bytes and thus had effectively turned into pad_for_ugly_hex_output. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05KVM: implement multiple address spacesPaolo Bonzini
Only two ioctls have to be modified; the address space id is placed in the higher 16 bits of their slot id argument. As of this patch, no architecture defines more than one address space; x86 will be the first. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-04KVM: x86: API changes for SMM supportPaolo Bonzini
This patch includes changes to the external API for SMM support. Userspace can predicate the availability of the new fields and ioctls on a new capability, KVM_CAP_X86_SMM, which is added at the end of the patch series. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-19KVM: MMU: fix SMAP virtualizationXiao Guangrong
KVM may turn a user page to a kernel page when kernel writes a readonly user page if CR0.WP = 1. This shadow page entry will be reused after SMAP is enabled so that kernel is allowed to access this user page Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu once CR4.SMAP is updated Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-07KVM: x86: Support for disabling quirksNadav Amit
Introducing KVM_CAP_DISABLE_QUIRKS for disabling x86 quirks that were previous created in order to overcome QEMU issues. Those issue were mostly result of invalid VM BIOS. Currently there are two quirks that can be disabled: 1. KVM_QUIRK_LINT0_REENABLED - LINT0 was enabled after boot 2. KVM_QUIRK_CD_NW_CLEARED - CD and NW are cleared after boot These two issues are already resolved in recent releases of QEMU, and would therefore be disabled by QEMU. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1428879221-29996-1-git-send-email-namit@cs.technion.ac.il> [Report capability from KVM_CHECK_EXTENSION too. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-21KVM: PPC: Book3S HV: Add fast real-mode H_RANDOM implementation.Michael Ellerman
Some PowerNV systems include a hardware random-number generator. This HWRNG is present on POWER7+ and POWER8 chips and is capable of generating one 64-bit random number every microsecond. The random numbers are produced by sampling a set of 64 unstable high-frequency oscillators and are almost completely entropic. PAPR defines an H_RANDOM hypercall which guests can use to obtain one 64-bit random sample from the HWRNG. This adds a real-mode implementation of the H_RANDOM hypercall. This hypercall was implemented in real mode because the latency of reading the HWRNG is generally small compared to the latency of a guest exit and entry for all the threads in the same virtual core. Userspace can detect the presence of the HWRNG and the H_RANDOM implementation by querying the KVM_CAP_PPC_HWRNG capability. The H_RANDOM hypercall implementation will only be invoked when the guest does an H_RANDOM hypercall if userspace first enables the in-kernel H_RANDOM implementation using the KVM_CAP_PPC_ENABLE_HCALL capability. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-04-07Merge tag 'kvm-s390-next-20150331' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Features and fixes for 4.1 (kvm/next) 1. Assorted changes 1.1 allow more feature bits for the guest 1.2 Store breaking event address on program interrupts 2. Interrupt handling rework 2.1 Fix copy_to_user while holding a spinlock (cc stable) 2.2 Rework floating interrupts to follow the priorities 2.3 Allow to inject all local interrupts via new ioctl 2.4 allow to get/set the full local irq state, e.g. for migration and introspection
2015-04-07Merge tag 'kvm-arm-for-4.1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into 'kvm-next' KVM/ARM changes for v4.1: - fixes for live migration - irqfd support - kvm-io-bus & vgic rework to enable ioeventfd - page ageing for stage-2 translation - various cleanups
2015-03-31KVM: s390: migrate vcpu interrupt stateJens Freimann
This patch adds support to migrate vcpu interrupts. Two new vcpu ioctls are added which get/set the complete status of pending interrupts in one go. The ioctls are marked as available with the new capability KVM_CAP_S390_IRQ_STATE. We can not use a ONEREG, as the number of pending local interrupts is not constant and depends on the number of CPUs. To retrieve the interrupt state we add an ioctl KVM_S390_GET_IRQ_STATE. Its input parameter is a pointer to a struct kvm_s390_irq_state which has a buffer and length. For all currently pending interrupts, we copy a struct kvm_s390_irq into the buffer and pass it to userspace. To store interrupt state into a buffer provided by userspace, we add an ioctl KVM_S390_SET_IRQ_STATE. It passes a struct kvm_s390_irq_state into the kernel and injects all interrupts contained in the buffer. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-31KVM: s390: add ioctl to inject local interruptsJens Freimann
We have introduced struct kvm_s390_irq a while ago which allows to inject all kinds of interrupts as defined in the Principles of Operation. Add ioctl to inject interrupts with the extended struct kvm_s390_irq Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-31KVM: s390: fix get_all_floating_irqsJens Freimann
This fixes a bug introduced with commit c05c4186bbe4 ("KVM: s390: add floating irq controller"). get_all_floating_irqs() does copy_to_user() while holding a spin lock. Let's fix this by filling a temporary buffer first and copy it to userspace after giving up the lock. Cc: <stable@vger.kernel.org> # 3.18+: 69a8d4562638 KVM: s390: no need to hold... Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-27MIPS: KVM: Wire up MSA capabilityJames Hogan
Now that the code is in place for KVM to support MIPS SIMD Architecutre (MSA) in MIPS guests, wire up the new KVM_CAP_MIPS_MSA capability. For backwards compatibility, the capability must be explicitly enabled in order to detect or make use of MSA from the guest. The capability is not supported if the hardware supports MSA vector partitioning, since the extra support cannot be tested yet and it extends the state that the userland program would have to save. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
2015-03-27MIPS: KVM: Expose MSA registersJames Hogan
Add KVM register numbers for the MIPS SIMD Architecture (MSA) registers, and implement access to them with the KVM_GET_ONE_REG / KVM_SET_ONE_REG ioctls when the MSA capability is enabled (exposed in a later patch) and present in the guest according to its Config3.MSAP bit. The MSA vector registers use the same register numbers as the FPU registers except with a different size (128bits). Since MSA depends on Status.FR=1, these registers are inaccessible when Status.FR=0. These registers are returned as a single native endian 128bit value, rather than least significant half first with each 64-bit half native endian as the kernel uses internally. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
2015-03-27MIPS: KVM: Wire up FPU capabilityJames Hogan
Now that the code is in place for KVM to support FPU in MIPS KVM guests, wire up the new KVM_CAP_MIPS_FPU capability. For backwards compatibility, the capability must be explicitly enabled in order to detect or make use of the FPU from the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
2015-03-27MIPS: KVM: Expose FPU registersJames Hogan
Add KVM register numbers for the MIPS FPU registers, and implement access to them with the KVM_GET_ONE_REG / KVM_SET_ONE_REG ioctls when the FPU capability is enabled (exposed in a later patch) and present in the guest according to its Config1.FP bit. The registers are accessible in the current mode of the guest, with each sized access showing what the guest would see with an equivalent access, and like the architecture they may become UNPREDICTABLE if the FR mode is changed. When FR=0, odd doubles are inaccessible as they do not exist in that mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: linux-doc@vger.kernel.org
2015-03-27MIPS: KVM: Add Config4/5 and writing of Config registersJames Hogan
Add Config4 and Config5 co-processor 0 registers, and add capability to write the Config1, Config3, Config4, and Config5 registers using the KVM API. Only supported bits can be written, to minimise the chances of the guest being given a configuration from e.g. QEMU that is inconsistent with that being emulated, and as such the handling is in trap_emul.c as it may need to be different for VZ. Currently the only modification permitted is to make Config4 and Config5 exist via the M bits, but other bits will be added for FPU and MSA support in future patches. Care should be taken by userland not to change bits without fully handling the possible extra state that may then exist and which the guest may begin to use and depend on. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-27MIPS: KVM: Implement PRid CP0 register accessJames Hogan
Implement access to the guest Processor Identification CP0 register using the KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls. This allows the owning process to modify and read back the value that is exposed to the guest in this register. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-17KVM: s390: Create ioctl for Getting/Setting guest storage keysJason J. Herne
Provide the KVM_S390_GET_SKEYS and KVM_S390_SET_SKEYS ioctl which can be used to get/set guest storage keys. This functionality is needed for live migration of s390 guests that use storage keys. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-17KVM: s390: introduce post handlers for STSIEkaterina Tumanova
The Store System Information (STSI) instruction currently collects all information it relays to the caller in the kernel. Some information, however, is only available in user space. An example of this is the guest name: The kernel always sets "KVMGuest", but user space knows the actual guest name. This patch introduces a new exit, KVM_EXIT_S390_STSI, guarded by a capability that can be enabled by user space if it wants to be able to insert such data. User space will be provided with the target buffer and the requested STSI function code. Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-17KVM: s390: Add MEMOP ioctls for reading/writing guest memoryThomas Huth
On s390, we've got to make sure to hold the IPTE lock while accessing logical memory. So let's add an ioctl for reading and writing logical memory to provide this feature for userspace, too. The maximum transfer size of this call is limited to 64kB to prevent that the guest can trigger huge copy_from/to_user transfers. QEMU currently only requests up to one or two pages so far, so 16*4kB seems to be a reasonable limit here. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-14arm/arm64: KVM: export VCPU power state via MP_STATE ioctlAlex Bennée
To cleanly restore an SMP VM we need to ensure that the current pause state of each vcpu is correctly recorded. Things could get confused if the CPU starts running after migration restore completes when it was paused before it state was captured. We use the existing KVM_GET/SET_MP_STATE ioctl to do this. The arm/arm64 interface is a lot simpler as the only valid states are KVM_MP_STATE_RUNNABLE and KVM_MP_STATE_STOPPED. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12KVM: arm/arm64: add irqfd supportEric Auger
This patch enables irqfd on arm/arm64. Both irqfd and resamplefd are supported. Injection is implemented in vgic.c without routing. This patch enables CONFIG_HAVE_KVM_EVENTFD and CONFIG_HAVE_KVM_IRQFD. KVM_CAP_IRQFD is now advertised. KVM_CAP_IRQFD_RESAMPLE capability automatically is advertised as soon as CONFIG_HAVE_KVM_IRQFD is set. Irqfd injection is restricted to SPI. The rationale behind not supporting PPI irqfd injection is that any device using a PPI would be a private-to-the-CPU device (timer for instance), so its state would have to be context-switched along with the VCPU and would require in-kernel wiring anyhow. It is not a relevant use case for irqfds. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-06KVM: s390: Allocate and save/restore vector registersEric Farman
Define and allocate space for both the host and guest views of the vector registers for a given vcpu. The 32 vector registers occupy 128 bits each (512 bytes total), but architecturally are paired with 512 additional bytes of reserved space for future expansion. The kvm_sync_regs structs containing the registers are union'ed with 1024 bytes of padding in the common kvm_run struct. The addition of 1024 bytes of new register information clearly exceeds the existing union, so an expansion of that padding is required. When changing environments, we need to appropriately save and restore the vector registers viewed by both the host and guest, into and out of the sync_regs space. The floating point registers overlay the upper half of vector registers 0-15, so there's a bit of data duplication here that needs to be carefully avoided. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "OK, this has the big virtio 1.0 implementation, as specified by OASIS. On top of tht is the major rework of lguest, to use PCI and virtio 1.0, to double-check the implementation. Then comes the inevitable fixes and cleanups from that work" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits) virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice. virtio_net: unconditionally define struct virtio_net_hdr_v1. tools/lguest: don't use legacy definitions for net device in example launcher. virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined. tools/lguest: use common error macros in the example launcher. tools/lguest: give virtqueues names for better error messages tools/lguest: more documentation and checking of virtio 1.0 compliance. lguest: don't look in console features to find emerg_wr. tools/lguest: don't start devices until DRIVER_OK status set. tools/lguest: handle indirect partway through chain. tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: rename virtio_pci_cfg_cap field to match spec. tools/lguest: fix features_accepted logic in example launcher. tools/lguest: handle device reset correctly in example launcher. virtual: Documentation: simplify and generalize paravirt_ops.txt lguest: remove NOTIFY call and eventfd facility. lguest: remove NOTIFY facility from demonstration launcher. lguest: use the PCI console device's emerg_wr for early boot messages. lguest: always put console in PCI slot #1. ...
2015-02-13virtual: Documentation: simplify and generalize paravirt_ops.txtLuis R. Rodriguez
The general documentation we have for pv_ops is currenty present on the IA64 docs, but since this documentation covers IA64 xen enablement and IA64 Xen support got ripped out a while ago through commit d52eefb47 present since v3.14-rc1 lets just simplify, generalize and move the pv_ops documentation to a shared place. Cc: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Alok Kataria <akataria@vmware.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: virtualization@lists.linux-foundation.org Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: xen-devel@lists.xenproject.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-09KVM: s390: add cpu model supportMichael Mueller
This patch enables cpu model support in kvm/s390 via the vm attribute interface. During KVM initialization, the host properties cpuid, IBC value and the facility list are stored in the architecture specific cpu model structure. During vcpu setup, these properties are taken to initialize the related SIE state. This mechanism allows to adjust the properties from user space and thus to implement different selectable cpu models. This patch uses the IBC functionality to block instructions that have not been implemented at the requested CPU type and GA level compared to the full host capability. Userspace has to initialize the cpu model before vcpu creation. A cpu model change of running vcpus is not possible. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-23Merge tag 'kvm-s390-next-20150122' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next KVM: s390: fixes and features for kvm/next (3.20) 1. Generic - sparse warning (make function static) - optimize locking - bugfixes for interrupt injection - fix MVPG addressing modes 2. hrtimer/wakeup fun A recent change can cause KVM hangs if adjtime is used in the host. The hrtimer might wake up too early or too late. Too early is fatal as vcpu_block will see that the wakeup condition is not met and sleep again. This CPU might never wake up again. This series addresses this problem. adjclock slowing down the host clock will result in too late wakeups. This will require more work. In addition to that we also change the hrtimer from REALTIME to MONOTONIC to avoid similar problems with timedatectl set-time. 3. sigp rework We will move all "slow" sigps to QEMU (protected with a capability that can be enabled) to avoid several races between concurrent SIGP orders. 4. Optimize the shadow page table Provide an interface to announce the maximum guest size. The kernel will use that to make the pagetable 2,3,4 (or theoretically) 5 levels. 5. Provide an interface to set the guest TOD We now use two vm attributes instead of two oneregs, as oneregs are vcpu ioctl and we don't want to call them from other threads. 6. Protected key functions The real HMC allows to enable/disable protected key CPACF functions. Lets provide an implementation + an interface for QEMU to activate this the protected key instructions.
2015-01-23KVM: s390: forward most SIGP orders to user spaceDavid Hildenbrand
Most SIGP orders are handled partially in kernel and partially in user space. In order to: - Get a correct SIGP SET PREFIX handler that informs user space - Avoid race conditions between concurrently executed SIGP orders - Serialize SIGP orders per VCPU We need to handle all "slow" SIGP orders in user space. The remaining ones to be handled completely in kernel are: - SENSE - SENSE RUNNING - EXTERNAL CALL - EMERGENCY SIGNAL - CONDITIONAL EMERGENCY SIGNAL According to the PoP, they have to be fast. They can be executed without conflicting to the actions of other pending/concurrently executing orders (e.g. STOP vs. START). This patch introduces a new capability that will - when enabled - forward all but the mentioned SIGP orders to user space. The instruction counters in the kernel are still updated. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-23KVM: s390: new parameter for SIGP STOP irqsDavid Hildenbrand
In order to get rid of the action_flags and to properly migrate pending SIGP STOP irqs triggered e.g. by SIGP STOP AND STORE STATUS, we need to remember whether to store the status when stopping. For this reason, a new parameter (flags) for the SIGP STOP irq is introduced. These flags further define details of the requested STOP and can be easily migrated. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-23KVM: s390: Allow userspace to limit guest memory sizeDominik Dingel
With commit c6c956b80bdf ("KVM: s390/mm: support gmap page tables with less than 5 levels") we are able to define a limit for the guest memory size. As we round up the guest size in respect to the levels of page tables we get to guest limits of: 2048 MB, 4096 GB, 8192 TB and 16384 PB. We currently limit the guest size to 16 TB, which means we end up creating a page table structure supporting guest sizes up to 8192 TB. This patch introduces an interface that allows userspace to tune this limit. This may bring performance improvements for small guests. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-20arm/arm64: KVM: force alignment of VGIC dist/CPU/redist addressesAndre Przywara
Although the GIC architecture requires us to map the MMIO regions only at page aligned addresses, we currently do not enforce this from the kernel side. Restrict any vGICv2 regions to be 4K aligned and any GICv3 regions to be 64K aligned. Document this requirement. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20arm/arm64: KVM: allow userland to request a virtual GICv3Andre Przywara
With all of the GICv3 code in place now we allow userland to ask the kernel for using a virtual GICv3 in the guest. Also we provide the necessary support for guests setting the memory addresses for the virtual distributor and redistributors. This requires some userland code to make use of that feature and explicitly ask for a virtual GICv3. Document that KVM_CREATE_IRQCHIP only works for GICv2, but is considered legacy and using KVM_CREATE_DEVICE is preferred. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-11KVM: arm/arm64: vgic: add init entry to VGIC KVM deviceEric Auger
Since the advent of VGIC dynamic initialization, this latter is initialized quite late on the first vcpu run or "on-demand", when injecting an IRQ or when the guest sets its registers. This initialization could be initiated explicitly much earlier by the users-space, as soon as it has provided the requested dimensioning parameters. This patch adds a new entry to the VGIC KVM device that allows the user to manually request the VGIC init: - a new KVM_DEV_ARM_VGIC_GRP_CTRL group is introduced. - Its first attribute is KVM_DEV_ARM_VGIC_CTRL_INIT The rationale behind introducing a group is to be able to add other controls later on, if needed. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-15Merge tag 'kvm-arm-for-3.19-take2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD Second round of changes for KVM for arm/arm64 for v3.19; fixes reboot problems, clarifies VCPU init, and fixes a regression concerning the VGIC init flow. Conflicts: arch/ia64/kvm/kvm-ia64.c [deleted in HEAD and modified in kvmarm]
2014-12-13arm/arm64: KVM: Turn off vcpus on PSCI shutdown/rebootChristoffer Dall
When a vcpu calls SYSTEM_OFF or SYSTEM_RESET with PSCI v0.2, the vcpus should really be turned off for the VM adhering to the suggestions in the PSCI spec, and it's the sane thing to do. Also, clarify the behavior and expectations for exits to user space with the KVM_EXIT_SYSTEM_EVENT case. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13arm/arm64: KVM: Clarify KVM_ARM_VCPU_INIT ABIChristoffer Dall
It is not clear that this ioctl can be called multiple times for a given vcpu. Userspace already does this, so clarify the ABI. Also specify that userspace is expected to always make secondary and subsequent calls to the ioctl with the same parameters for the VCPU as the initial call (which userspace also already does). Add code to check that userspace doesn't violate that ABI in the future, and move the kvm_vcpu_set_target() function which is currently duplicated between the 32-bit and 64-bit versions in guest.c to a common static function in arm.c, shared between both architectures. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13arm/arm64: KVM: Correct KVM_ARM_VCPU_INIT power off optionChristoffer Dall
The implementation of KVM_ARM_VCPU_INIT is currently not doing what userspace expects, namely making sure that a vcpu which may have been turned off using PSCI is returned to its initial state, which would be powered on if userspace does not set the KVM_ARM_VCPU_POWER_OFF flag. Implement the expected functionality and clarify the ABI. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-11-20kvm: Documentation: remove ia64Tiejun Chen
kvm/ia64 is gone, clean up Documentation too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-07Merge tag 'kvm-s390-next-20141107' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes for kvm/next (3.19) and stable 1. We should flush TLBs for load control instruction emulation (stable) 2. A workaround for a compiler bug that renders ACCESS_ONCE broken (stable) 3. Fix program check handling for load control 4. Documentation Fix
2014-11-07KVM: fix vm device attribute documentationDominik Dingel
Documentation uses incorrect attribute names for some vm device attributes: fix this. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-11-03kvm: drop unsupported capabilities, fix documentationMichael S. Tsirkin
No kernel ever reported KVM_CAP_DEVICE_MSIX, KVM_CAP_DEVICE_MSI, KVM_CAP_DEVICE_ASSIGNMENT, KVM_CAP_DEVICE_DEASSIGNMENT. This makes the documentation wrong, and no application ever written to use these capabilities has a chance to work correctly. The only way to detect support is to try, and test errno for ENOTTY. That's unfortunate, but we can't fix the past. Document the actual semantics, and drop the definitions from the exported header to make it easier for application developers to note and fix the bug. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-03Documentation: virtual: kvm: correct one bit description in APF caseTiejun Chen
When commit 6adba5274206 (KVM: Let host know whether the guest can handle async PF in non-userspace context.) is introduced, actually bit 2 still is reserved and should be zero. Instead, bit 1 is 1 to indicate if asynchronous page faults can be injected when vcpu is in cpl == 0, and also please see this, in the file kvm_para.h, #define KVM_ASYNC_PF_SEND_ALWAYS (1 << 1). Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-27Merge tag 'kvm-arm-for-3.18' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next Changes for KVM for arm/arm64 for 3.18 This includes a bunch of changes: - Support read-only memory slots on arm/arm64 - Various changes to fix Sparse warnings - Correctly detect write vs. read Stage-2 faults - Various VGIC cleanups and fixes - Dynamic VGIC data strcuture sizing - Fix SGI set_clear_pend offset bug - Fix VTTBR_BADDR Mask - Correctly report the FSC on Stage-2 faults Conflicts: virt/kvm/eventfd.c [duplicate, different patch where the kvm-arm version broke x86. The kvm tree instead has the right one]
2014-09-22KVM: PPC: BOOKE: Add one_reg documentation of SPRG9 and DBSRBharat Bhushan
This was missed in respective one_reg implementation patch. Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-19arm/arm64: KVM: vgic: make number of irqs a configurable attributeMarc Zyngier
In order to make the number of interrupts configurable, use the new fancy device management API to add KVM_DEV_ARM_VGIC_GRP_NR_IRQS as a VGIC configurable attribute. Userspace can now specify the exact size of the GIC (by increments of 32 interrupts). Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-10KVM: fix api documentation of KVM_GET_EMULATED_CPUIDAlex Bennée
It looks like when this was initially merged it got accidentally included in the following section. I've just moved it back in the correct section and re-numbered it as other ioctls have been added since. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-10KVM: document KVM_SET_GUEST_DEBUG apiAlex Bennée
In preparation for working on the ARM implementation I noticed the debug interface was missing from the API document. I've pieced together the expected behaviour from the code and commit messages written it up as best I can. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-03kvm: fix potentially corrupt mmio cacheDavid Matlack
vcpu exits and memslot mutations can run concurrently as long as the vcpu does not aquire the slots mutex. Thus it is theoretically possible for memslots to change underneath a vcpu that is handling an exit. If we increment the memslot generation number again after synchronize_srcu_expedited(), vcpus can safely cache memslot generation without maintaining a single rcu_dereference through an entire vm exit. And much of the x86/kvm code does not maintain a single rcu_dereference of the current memslots during each exit. We can prevent the following case: vcpu (CPU 0) | thread (CPU 1) --------------------------------------------+-------------------------- 1 vm exit | 2 srcu_read_unlock(&kvm->srcu) | 3 decide to cache something based on | old memslots | 4 | change memslots | (increments generation) 5 | synchronize_srcu(&kvm->srcu); 6 retrieve generation # from new memslots | 7 tag cache with new memslot generation | 8 srcu_read_unlock(&kvm->srcu) | ... | <action based on cache occurs even | though the caching decision was based | on the old memslots> | ... | <action *continues* to occur until next | memslot generation change, which may | be never> | | By incrementing the generation after synchronizing with kvm->srcu readers, we ensure that the generation retrieved in (6) will become invalid soon after (8). Keeping the existing increment is not strictly necessary, but we do keep it and just move it for consistency from update_memslots to install_new_memslots. It invalidates old cached MMIOs immediately, instead of having to wait for the end of synchronize_srcu_expedited, which makes the code more clearly correct in case CPU 1 is preempted right after synchronize_srcu() returns. To avoid halving the generation space in SPTEs, always presume that the low bit of the generation is zero when reconstructing a generation number out of an SPTE. This effectively disables MMIO caching in SPTEs during the call to synchronize_srcu_expedited. Using the low bit this way is somewhat like a seqcount---where the protected thing is a cache, and instead of retrying we can simply punt if we observe the low bit to be 1. Cc: stable@vger.kernel.org Signed-off-by: David Matlack <dmatlack@google.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-25KVM: clarify the idea of kvm_dirty_regsDavid Hildenbrand
This patch clarifies that kvm_dirty_regs are just a hint to the kernel and that the kernel might just ignore some flags and sync the values (like done for acrs and gprs now). Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>