summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2017-12-12Merge branch 'linux-4.9-nxp' into linux-4.9 on Dec. 12, 2017Xie Xiaobo
Signed-off-by: Xiaobo Xie <xiaobo.xie@nxp.com>
2017-12-12clk: qoriq: add more divider clocks supportYuantian Tang
More divider clocks are needed for IP use. So enlarge the PLL divider array to accommodate more divider clocks. Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
2017-12-12Merge branch 'linux-4.9-nxp' into linux-4.9 on Dec. 8, 2017Xie Xiaobo
Signed-off-by: Xiaobo Xie <xiaobo.xie@nxp.com>
2017-12-12Merge Linaro linux 4.9.62 into linux-4.9Xie Xiaobo
Signed-off-by: Xiaobo Xie <xiaobo.xie@nxp.com>
2017-12-12PCI: layerscape: Add support for ls1088aHou Zhiqiang
Add support for ls1088a. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Minghuan Lian <minghuan.Lian@nxp.com>
2017-12-12usb: dwc3: workaround: disable device-initiated U1/U2Ran Wang
Issue: When the USB controller is configured as a USB device mode, the device initiates low power when an ACK is pending for a data packet (DP). When operating in SuperSpeed mode and when the internal condition for low power (u1/u2) is satisfied, the device initiates u1/u2 even though it has just received a DPH of the DP header (DPH). This causes the link to enter and exit low power before the device sends an ACK for the DP. This behavior can cause a transaction timeout on the host for the DP. Impact: Depending on the host transaction timeout value, the host may timeout on the transaction and the host retries the transfer. If the same issue happens again, this could result in the host resetting the device and re-enumerating. Workaround: Disable USB_DCTL (InitU1Ena, InitU2Ena) bits. As a result,the device does not initiate lowpower requests; however, it can still accept low-power requests from the host/hub and enter low power. Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2017-12-12irqchip/ls-scfg-msi: add LS1012a MSI supportHou Zhiqiang
The ls1012a implement only 1 msi controller, and it is the same as ls1043a. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2017-12-12net: fsl_ppfe: dts binding for ppfeCalvin Johnson
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
2017-11-16 Merge tag 'v4.9.62' into linux-linaro-lsk-v4.9Alex Shi
This is the 4.9.62 stable release
2017-11-15dt-bindings: Add vendor prefix for LEGODavid Lechner
[ Upstream commit 7dcc31e2e68a386a29070384b51683ece80982bf ] Add a vendor prefix for LEGO Systems A/S Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15dt-bindings: Add LEGO MINDSTORMS EV3 compatible specificationDavid Lechner
[ Upstream commit 21078ab174c99885ca83a5c32db0d33b1617745e ] This adds the board level device tree specification for LEGO MINDSTORMS EV3 Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15dt-bindings: clockgen: Add compatible string for LS1012AHarninder Rai
[ Upstream commit 73447f68d7b2bc1df870da88b0e21d2bc1afc025 ] Signed-off-by: Harninder Rai <harninder.rai@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-09 Merge tag 'v4.9.61' into linux-linaro-lsk-v4.9Alex Shi
This is the 4.9.61 stable release
2017-11-08clocksource/drivers/arm_arch_timer: Add dt binding for hisilicon-161010101 ↵Ding Tianhong
erratum [ Upstream commit 729e55225b1f6225ee7a2a358d5141a3264627c4 ] This erratum describes a bug in logic outside the core, so MIDR can't be used to identify its presence, and reading an SoC-specific revision register from common arch timer code would be awkward. So, describe it in the device tree. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-09Merge remote-tracking branch 'lts/linux-4.9.y' into linux-linaro-lsk-v4.9Alex Shi
2017-10-08iio: adc: hx711: Add DT binding for avia,hx711Andreas Klinger
[ Upstream commit ff1293f67734da68e23fecb6ecdae7112b8c43f9 ] Add DT bindings for avia,hx711 Add vendor avia to vendor list Signed-off-by: Andreas Klinger <ak@it-klinger.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08drm: bridge: add DT bindings for TI ths8135Bartosz Golaszewski
[ Upstream commit 2e644be30fcc08c736f66b60f4898d274d4873ab ] THS8135 is a configurable video DAC. Add DT bindings for this chip. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481623759-12786-3-git-send-email-bgolaszewski@baylibre.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05crypto: caam: add caam-dma node to SEC4.0 device tree bindingRadu Alexe
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
2017-09-28PCI: layerscape: Add support for ls1012aHou Zhiqiang
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2017-09-28dt-bindings: clockgen: Add compatible string for LS1012AHarninder Rai
Signed-off-by: Harninder Rai <harninder.rai@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-25iommu: Implement reserved_regions iommu-group sysfs fileEric Auger
A new iommu-group sysfs attribute file is introduced. It contains the list of reserved regions for the iommu-group. Each reserved region is described on a separate line: - first field is the start IOVA address, - second is the end IOVA address, - third is the type. Signed-off-by: Eric Auger <eric.auger@redhat.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-09-25iommu/arm-smmu: Add global SMR masking propertyRobin Murphy
The current SMR masking support using a 2-cell iommu-specifier is primarily intended to handle individual masters with large and/or complex Stream ID assignments; it quickly gets a bit clunky in other SMR use-cases where we just want to consistently mask out the same part of every Stream ID (e.g. for MMU-500 configurations where the appended TBU number gets in the way unnecessarily). Let's add a new property to allow a single global mask value to better fit the latter situation. Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Nipun Gupta <nipun.gupta@nxp.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-09-25add restool ioctl entry to DocumentationIoana Ciornei
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
2017-09-25dma: fsl-dma: add qdma command queue modejiaheng.fan
The patch is used for add the qdma command queue support. Both qDMA source data and destination data can be either contiguous or non-contiguous using one or more scatter/gather tables. Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
2017-09-25dt-bindings: net: Add Cortina device tree bindingsBogdan Purcareata
Add device tree description info for Cortina 10G phy devices. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25PCI: layerscape: Add support for ls2088aHou Zhiqiang
commit 71ca9d68e282482f4e67cebac2b287b9f11d826a [dwc -> host] Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Integrated-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
2017-09-25PCI: layerscape: Add LS1046a supportMingkai Hu
commit 1d77040bde2d21dc7db575d4b43c1da24c94cca1 [context adjustment] Add support for the LS1046a PCIe controller. This device has a different LUT_DBG offset, so add "lut_dbg" to ls_pcie_drvdata to describe this difference. [bhelgaas: changelog, remove now-unused PCIE_LUT_DBG] Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
2017-09-25pci:add support aer/pme interrupts with none MSI/MSI-X/INTx modePo Liu
[pcie part] On some platforms, root port doesn't support MSI/MSI-X/INTx in RC mode. When chip support the aer/pme interrupts with none MSI/MSI-X/INTx mode, maybe there is interrupt line for aer pme etc. Search the interrupt number in the fdt file. Then fixup the dev->irq with it. Signed-off-by: Po Liu <po.liu@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
2017-09-25irqchip/ls-scfg-msi: add LS1043a v1.1 MSI supportMinghuan Lian
A MSI controller of LS1043a v1.0 only includes one MSIR and is assigned one GIC interrupt. In order to support affinity, LS1043a v1.1 MSI is assigned 4 MSIRs and 4 GIC interrupts. But the MSIR has the different offset and only supports 8 MSIs. The bits between variable bit_start and bit_end in structure ls_scfg_msir are used to show 8 MSI interrupts. msir_irqs and msir_base are added to describe the difference of MSI between LS1043a v1.1 and other SoCs. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2017-09-25irqchip/ls-scfg-msi: fix typo of MSI compatible stringsMinghuan Lian
The patch is to fix typo of the Layerscape SCFG MSI dts compatible strings. "1" is replaced by "l". Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2017-09-25crypto: caam - add support for iMX6ULMarcus Folkesson
i.MX6UL does only require three clocks to enable CAAM module. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-07 Merge tag 'v4.9.41' into linux-linaro-lsk-v4.9Alex Shi
This is the 4.9.41 stable release
2017-08-07dt-bindings: input: Specify the interrupt number of TPS65217 power buttonMilo Kim
[ Upstream commit 820381572fc015baa4f5744f5d4583ec0c0f1b82 ] Specify the power button interrupt number which is from the datasheet. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-07dt-bindings: power/supply: Update TPS65217 propertiesMilo Kim
[ Upstream commit 81d7358d7038dd1001547950087e5b0641732f3f ] Add interrupt specifiers for USB and AC charger input. Interrupt numbers are from the datasheet. Fix wrong property for compatible string. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-14Docs: dt: add fsl-mc iommu-map device-tree bindingNipun Gupta
The existing IOMMU bindings cannot be used to specify the relationship between fsl-mc devices and IOMMUs. This patch adds a generic binding for mapping fsl-mc devices to IOMMUs, using iommu-map property. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
2017-07-14staging: fsl-mc: add sysfs ABI docStuart Yoder
define the bind/unbind sysfs interfaces for the fsl-mc bus Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-14USB3/DWC3: Add property "snps,dma-snooping" to enable snoopingChangming Huang
Some DWC3 platform has DMA snooping feature. Therefore, add property "snps,dma-snooping" to enable it. Signed-off-by: Changming Huang <jerry.huang@nxp.com>
2017-07-14USB3: DWC3: Add property snps incr burst type adjustment for INCR burst typeChangming Huang
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
2017-07-14arm64: dts: ls1046a: add MSI dts nodeMinghuan Lian
LS1046a includes 3 MSI controllers. Each controller supports 128 interrupts. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2017-07-14dt-bindings: arm: Add entry for FSL LS1088A RDB, QDS boardsHarninder Rai
Signed-off-by: Harninder Rai <harninder.rai@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-14dt-bindings: Add compatible for LS2088A QDS and RDB boardAbhimanyu Saini
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-14Documentation: DT: add LS1012A compatible for SCFG and DCFGHarninder Rai
Signed-off-by: Harninder Rai <harninder.rai@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-14Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boardsHarninder Rai
Signed-off-by: Harninder Rai <harninder.rai@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-14Documentation: DT: Add entry for QorIQ LS1046A-QDS boardShaohui Xie
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-14Documentation: DT: Add entry for QorIQ LS1046A-RDB boardShaohui Xie
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-14dt-bindings: fsl: add LS1043A/LS1046A/LS2080A compatible for SCFG and DCFGShaohui Xie
SCFG and DCFG are SoC-specific devices can be found on SoCs like LS1021A, LS1043A and LS1046A, this patch updates bindings for SCFG and DCFG to reflect more SoCs. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-14dt-bindings: fsl: Add LS1043A/LS1046A/LS2080A SoC compatible stringsShaohui Xie
Adds SoC compatible for LS1043A and LS2080A which are supported, and for LS1046A which is going to be supported. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-12 Merge tag 'v4.9.36' into linux-linaro-lsk-v4.9Alex Shi
This is the 4.9.36 stable release
2017-07-05net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface typesKaricheri, Muralidharan
[ Upstream commit 34c55cf2fc75f8bf6ba87df321038c064cf2d426 ] Currently dp83867 driver returns error if phy interface type PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID. Fix this by checking also the interface type if a particular delay value is missing in the phy dt bindings. Also update the DT document accordingly. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05Documentation: devicetree: change the mediatek ethernet compatible stringJohn Crispin
[ Upstream commit 61976fff20f92aceecc3670f6168bfc57a79e047 ] When the binding was defined, I was not aware that mt2701 was an earlier version of the SoC. For sake of consistency, the ethernet driver should use mt2701 inside the compat string as this is the earliest SoC with the ethernet core. The ethernet driver is currently of no real use until we finish and upstream the DSA driver. There are no users of this binding yet. It should be safe to fix this now before it is too late and we need to provide backward compatibility for the mt7623-eth compat string. Reported-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: John Crispin <john@phrozen.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v0.10.2 at 2024-05-18 20:43:20 (GMT)