summaryrefslogtreecommitdiff
path: root/arch/arc
AgeCommit message (Collapse)Author
2017-02-14ARC: [arcompact] brown paper bag bug in unaligned access delay slot fixupVineet Gupta
commit a524c218bc94c705886a0e0fedeee45d1931da32 upstream. Reported-by: Jo-Philipp Wich <jo@mein.io> Fixes: 9aed02feae57bf7 ("ARC: [arcompact] handle unaligned access delay slot") Cc: linux-kernel@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-01ARC: [arcompact] handle unaligned access delay slot corner caseVineet Gupta
commit 9aed02feae57bf7a40cb04ea0e3017cb7a998db4 upstream. After emulating an unaligned access in delay slot of a branch, we pretend as the delay slot never happened - so return back to actual branch target (or next PC if branch was not taken). Curently we did this by handling STATUS32.DE, we also need to clear the BTA.T bit, which is disregarded when returning from original misaligned exception, but could cause weirdness if it took the interrupt return path (in case interrupt was acive too) One ARC700 customer ran into this when enabling unaligned access fixup for kernel mode accesses as well Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-01ARC: udelay: fix inline assembler by adding LP_COUNT to clobber listVineet Gupta
commit 36425cd67052e3becf325fd4d3ba5691791ef7e4 upstream. commit 3c7c7a2fc8811bc ("ARC: Don't use "+l" inline asm constraint") modified the inline assembly to setup LP_COUNT register manually and NOT rely on gcc to do it (with the +l inline assembler contraint hint, now being retired in the compiler) However the fix was flawed as we didn't add LP_COUNT to asm clobber list, meaning gcc doesn't know that LP_COUNT or zero-delay-loops are in action in the inline asm. This resulted in some fun - as nested ZOL loops were being generared | mov lp_count,250000 ;16 # tmp235, | lp .L__GCC__LP14 # <======= OUTER LOOP (gcc generated) | .L14: | ld r2, [r5] # MEM[(volatile u32 *)prephitmp_43], w | dmb 1 | breq r2, -1, @.L21 #, w,, | bbit0 r2,1,@.L13 # w,, | ld r4,[r7] ;25 # loops_per_jiffy, loops_per_jiffy | mpymu r3,r4,r6 #, loops_per_jiffy, tmp234 | | mov lp_count, r3 # <====== INNER LOOP (from inline asm) | lp 1f | nop | 1: | nop_s | .L__GCC__LP14: ; loop end, start is @.L14 #, This caused issues with drivers relying on sane behaviour of udelay friends. With LP_COUNT added to clobber list, gcc doesn't generate the outer loop in say above case. Addresses STAR 9001146134 Reported-by: Joao Pinto <jpinto@synopsys.com> Fixes: 3c7c7a2fc8811bc ("ARC: Don't use "+l" inline asm constraint") Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-26ARC: module: Fix !CONFIG_ARC_DW2_UNWIND buildsVineet Gupta
commit eb1357d942e5d96de6b4c20a8ffa55acf96233a2 upstream. commit d65283f7b695b5 added mod->arch.secstr under CONFIG_ARC_DW2_UNWIND, but used it unconditionally which broke builds when the option was disabled. Fix that by adjusting the #ifdef guard. And while at it add a missing guard (for unwinder) in module.c as well Reported-by: Waldemar Brodkorb <wbx@openadk.org> Fixes: d65283f7b695b5 ("ARC: module: elide loop to save reference to .eh_frame") Tested-by: Anton Kolesov <akolesov@synopsys.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> [abrodkin: provided fixlet to Kconfig per failure in allnoconfig build] Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09ARC: mm: arc700: Don't assume 2 colours for aliasing VIPT dcacheVineet Gupta
commit 08fe007968b2b45e831daf74899f79a54d73f773 upstream. An ARC700 customer reported linux boot crashes when upgrading to bigger L1 dcache (64K from 32K). Turns out they had an aliasing VIPT config and current code only assumed 2 colours, while theirs had 4. So default to 4 colours and complain if there are fewer. Ideally this needs to be a Kconfig option, but heck that's too much of hassle for a single user. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29ARC: mm: PAE40: Fix crash at munmapYuriy Kolerov
commit 1c3c90930392 broke PAE40. Macro pfn_pte(pfn, prot) creates paddr from pfn, but the page shift was getting truncated to 32 bits since we lost the proper cast to 64 bits (for PAE400 Instead of reverting that commit, use a better helper which is 32/64 bits safe just like ARM implementation. Fixes: 1c3c90930392 ("ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS") Cc: <stable@vger.kernel.org> #4.4+ Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> [vgupta: massaged changelog] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-28ARC: mm: IOC: Don't enable IOC by defaultVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-28ARC: Don't use "+l" inline asm constraintVineet Gupta
Apparenty this is coming in the way of gcc fix which inhibits the usage of LP_COUNT as a gpr. Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-12Merge tag 'arc-4.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - mmap handler for dma ops as generic handler no longer works for us [Alexey] - Fixes for EZChip platform [Noam] - Fix RTC clocksource driver build issue - ARC IRQ handling fixes [Yuriy] - Revert a recent makefile change which doesn't go well with oldish tools out in the wild * tag 'arc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core ARC: IRQ: Do not use hwirq as virq and vice versa ARC: [plat-eznps] set default baud for early console ARC: [plat-eznps] remove IPI clear from SMP operations Revert "ARC: build: retire old toggles" ARC: timer: rtc: implement read loop in "C" vs. inline asm ARC: change return value of userspace cmpxchg assist syscall arc: Implement arch-specific dma_map_ops.mmap ARC: [SMP] avoid overriding present cpumask ARC: Enable PERF_EVENTS in nSIM driven platforms
2016-11-11Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"Arnd Bergmann
Traditionally, we have always had warnings about uninitialized variables enabled, as this is part of -Wall, and generally a good idea [1], but it also always produced false positives, mainly because this is a variation of the halting problem and provably impossible to get right in all cases [2]. Various people have identified cases that are particularly bad for false positives, and in commit e74fc973b6e5 ("Turn off -Wmaybe-uninitialized when building with -Os"), I turned off the warning for any build that was done with CC_OPTIMIZE_FOR_SIZE. This drastically reduced the number of false positive warnings in the default build but unfortunately had the side effect of turning the warning off completely in 'allmodconfig' builds, which in turn led to a lot of warnings (both actual bugs, and remaining false positives) to go in unnoticed. With commit 877417e6ffb9 ("Kbuild: change CC_OPTIMIZE_FOR_SIZE definition") enabled the warning again for allmodconfig builds in v4.7 and in v4.8-rc1, I had finally managed to address all warnings I get in an ARM allmodconfig build and most other maybe-uninitialized warnings for ARM randconfig builds. However, commit 6e8d666e9253 ("Disable "maybe-uninitialized" warning globally") was merged at the same time and disabled it completely for all configurations, because of false-positive warnings on x86 that I had not addressed until then. This caused a lot of actual bugs to get merged into mainline, and I sent several dozen patches for these during the v4.9 development cycle. Most of these are actual bugs, some are for correct code that is safe because it is only called under external constraints that make it impossible to run into the case that gcc sees, and in a few cases gcc is just stupid and finds something that can obviously never happen. I have now done a few thousand randconfig builds on x86 and collected all patches that I needed to address every single warning I got (I can provide the combined patch for the other warnings if anyone is interested), so I hope we can get the warning back and let people catch the actual bugs earlier. This reverts the change to disable the warning completely and for now brings it back at the "make W=1" level, so we can get it merged into mainline without introducing false positives. A follow-up patch enables it on all levels unless some configuration option turns it off because of false-positives. Link: https://rusty.ozlabs.org/?p=232 [1] Link: https://gcc.gnu.org/wiki/Better_Uninitialized_Warnings [2] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-08ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination coreYuriy Kolerov
ARC linux uses 2 distribution modes for common interrupts: round robin mode (IDU_M_DISTRI_RR) and a simple destination mode (IDU_M_DISTRI_DEST). The first one is used when more than 1 cores may handle a common interrupt and the second one is used when only 1 core may handle a common interrupt. However idu_irq_set_affinity() always sets IDU_M_DISTRI_RR for all affinity values. But there is no sense in setting of such mode if only 1 core must handle a common interrupt. Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-08ARC: IRQ: Do not use hwirq as virq and vice versaYuriy Kolerov
This came up when reviewing code to address missing IRQ affinity setting in AXS103 platform and/or implementing hierarchical IRQ domains - smp_ipi_irq_setup() callers pass hwirq but in turn calls request_percpu_irq() which expects a linux virq. So invoke irq_find_mapping() to do the conversion (also explicitify this in code by renaming the args appropriately) - idu_of_init()/idu_cascade_isr() were similarly using linux virq where hwirq is expected, so do the conversion using irqd_to_hwirq() helper Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> [vgupta: made changelog a bit concise a bit] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-08ARC: [plat-eznps] set default baud for early consoleNoam Camus
For CONFIG_SERIAL_EARLYCON we need 800MHz for NPS SoC The early console driver uses BASE_BAUD and not using dtb. The default of 50MHz is NOT good for NPS SoC. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-08ARC: [plat-eznps] remove IPI clear from SMP operationsNoam Camus
Today we register to plat_smp_ops.clear() method which actually is acking the IPI. However this is already taking care by our irqchip driver specifically by the irq_chip.irq_eoi() method. This is perfect timing where it should be done and no special handling is needed at plat_smp_ops.clear(). Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-08Revert "ARC: build: retire old toggles"Vineet Gupta
This has caused a bunch of build failures at a few sites, with GNU 2015.12 and older as the assembler seems to need -mlock to be able to grok llock/scond instructions for ARC700 builds. different places since the older tools still seem to release of tools which most people are using seem to trip with the -mlock flag not being passed. This reverts commit c3005475889c7c730638f95d13be3360f0b33e98.
2016-11-07ARC: timer: rtc: implement read loop in "C" vs. inline asmVineet Gupta
The current code doesn't even compile as somehow the inline assembly can't see the register names defined as ARC_RTC_* I'm pretty sure It worked when I first got it merged, but the tools were definitely different then. So better to write this in "C" anyways. CC: stable@vger.kernel.org #4.2+ Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-07ARC: change return value of userspace cmpxchg assist syscallVineet Gupta
The original syscall only used to return errno to indicate if cmpxchg succeeded. It was not returning the "previous" value which typical cmpxchg callers are interested in to build their slowpaths or retry loops. Given user preemption in syscall return path etc, it is not wise to check this in userspace afterwards, but should be what kernel actually observed in the syscall. So change the syscall interface to always return the previous value and additionally set Z flag to indicate whether operation succeeded or not (just like ARM implementation when they used to have this syscall) The flag approach avoids having to put_user errno which is nice given the use case for this syscall cares mostly about the "previous" value. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-03arc: Implement arch-specific dma_map_ops.mmapAlexey Brodkin
We used to use generic implementation of dma_map_ops.mmap which is dma_common_mmap() but that only worked for simpler cached mappings when vaddr = paddr. If a driver requests uncached DMA buffer kernel maps it to virtual address so that MMU gets involved and page uncached status takes into account. In that case usage of dma_common_mmap() lead to mapping of vaddr to vaddr for user-space which is obviously wrong. For more detals please refer to verbose explanation here [1]. So here we implement our own version of mmap() which always deals with dma_addr and maps underlying memory to user-space properly (note that DMA buffer mapped to user-space is always uncached because there's no way to properly manage cache from user-space). [1] https://lkml.org/lkml/2016/10/26/973 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> #4.5+ Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-01ARC: [SMP] avoid overriding present cpumaskNoam Camus
At smp_prepare_cpus() we set present cpu mask as part of init for all CPUs at range [0-max_cpus]. This is done without checking if this mask is already being set. At platform of eznps this mask is already being initialized at smp_init_cpus() by using hook plat_smp_ops.init_early_smp(). So to avoid overriding of present cpu mask we check the number of bits which are set in this mask. At the begin only bit for boot CPU is set so if number of bits already set is no more than one we can be assure that there is no overriding of this mask. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-01ARC: Enable PERF_EVENTS in nSIM driven platformsAlexey Brodkin
Now when we have properly working performance counters in nSIM even with interrupt support (fix should be a part of upcoming nSIM engineering build 2016.12-005) we may enable perf support by default for all platforms that use nSIM for ARC cores simulation. Note 1: PCT node was missing for some reason in nsimosci.dts while all other nSIM-related .dts files already had PCT node for quite some time, so adding it now. Note 2: All defconfigs were regenerated with "make savedefconfig" which led to some clean-ups in nsimosci_hs_smp_defconfig: CONFIG_FRAMEBUFFER_CONSOLE=y was removed because it is automatically selected now by DRM. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARC: module: print pretty section namesVineet Gupta
Now that we have referece to section name string table in apply_relocate_add(), use it to - print the name of section being relocated - print symbol with NULL name (since it refers to a section) before | Section to fixup 7000a060 | ========================================================= | rela->r_off | rela->addend | sym->st_value | ADDR | VALUE | ========================================================= | 1c 0 7000e000 7000a07c 7000e000 [] | 40 0 7000a000 7000a0a0 7000a000 [] after | Section to fixup .eh_frame @7000a060 | ========================================================= | r_off r_add st_value ADDRESS VALUE | ========================================================= | 1c 0 7000e000 7000a07c 7000e000 [.init.text] | 40 0 7000a000 7000a0a0 7000a000 [.exit.text] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARC: module: elide loop to save reference to .eh_frameVineet Gupta
The loop was really needed in .debug_frame regime where wanted make it as SH_ALLOC so that apply_relocate_add() would process it. That's not needed for .eh_frame, so we check this in apply_relocate_add() which gets called for each section. Note that we need to save reference to "section name strings" section in module_frob_arch_sections() since apply_relocate_add() doesn't get that Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...Vineet Gupta
... given that we have perf counters abel to do the same thing non intrusively Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARC: build: retire old togglesVineet Gupta
These are really ancient toggles and tools no longer require them to be passed. This paves way for deprecating them in long run. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARC: boot log: refactor cpu name/release printingVineet Gupta
The motivation is to identify ARC750 vs. ARC770 (we currently print generic "ARC700"). A given ARC700 release could be 750 or 770, with same ARCNUM (or family identifier which is unfortunate). The existing arc_cpu_tbl[] kept a single concatenated string for core name and release which thus doesn't work for 750 vs. 770 identification. So split this into 2 tables, one with core names and other with release. And while we are at it, get rid of the range checking for family numbers. We just document the known to exist cores running Linux and ditch others. With this in place, we add detection of ARC750 which is - cores 0x33 and before - cores 0x34 and later with MMUv2 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARC: boot log: remove awkward space comma from MMU lineVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARC: boot log: don't assume SWAPE instruction supportVineet Gupta
This came to light when helping a customer with oldish ARC750 core who were getting instruction errors because of lack of SWAPE but boot log was incorrectly printing it as being present Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARC: boot log: refactor printing abt features not captured in BCRsVineet Gupta
On older arc700 cores, some of the features configured were not present in Build config registers. To print about them at boot, we just use the Kconfig option i.e. whether linux is built to use them or not. So yes this seems bogus, but what else can be done. Moreover if linux is booting with these enabled, then the Kconfig info is a good indicator anyways. Over time these "hacks" accumulated in read_arc_build_cfg_regs() as well as arc_cpu_mumbojumbo(). so refactor and move all of those in a single place: read_arc_build_cfg_regs(). This causes some code redcution too: | bloat-o-meter2 arch/arc/kernel/setup.o.0 arch/arc/kernel/setup.o.1 | add/remove: 0/0 grow/shrink: 2/1 up/down: 64/-132 (-68) | function old new delta | setup_processor 610 670 +60 | cpuinfo_arc700 76 80 +4 | arc_cpu_mumbojumbo 752 620 -132 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARCv2: boot log: print IOC exists as well as enabled statusVineet Gupta
Previously we would not print the case when IOC existed but was not enabled. And while at it, reduce one line off boot printing by consolidating the Peripheral address space and IO-Coherency which in a way applies to them Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-24ARCv2: IOC: use @ioc_enable not @ioc_exist where intendedVineet Gupta
if user disables IOC from debugger at startup (by clearing @ioc_enable), @ioc_exists is cleared too. This means boot prints don't capture the fact that IOC was present but disabled which could be misleading. So invert how we use @ioc_enable and @ioc_exists and make it more canonical. @ioc_exists represent whether hardware is present or not and stays same whether enabled or not. @ioc_enable is still user driven, but will be auto-disabled if IOC hardware is not present, i.e. if @ioc_exist=0. This is opposite to what we were doing before, but much clearer. This means @ioc_enable is now the "exported" toggle in rest of code such as dma mapping API. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-24ARC: syscall for userspace cmpxchg assistVineet Gupta
Older ARC700 cores (ARC750 specifically) lack instructions to implement atomic r-w-w. This is problematic for userspace libraries such as NPTL which need atomic primitives. So enable them by providing kernel assist. This is costly but really the only sane soluton (othern than tight spinning using the otherwise availiable atomic exchange EX instruciton). Good thing is there are only a few of these cores running Linux out in the wild. This only works on UP systems. Reviewed-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-19ARC: fix build warning in elf.hVineet Gupta
The cast valid since TASK_SIZE * 2 will never actually cause overflow. | CC fs/binfmt_elf.o | In file included from ../include/linux/elf.h:4:0, | from ../include/linux/module.h:15, | from ../fs/binfmt_elf.c:12: | ../fs/binfmt_elf.c: In function load_elf_binar: | ../arch/arc/include/asm/elf.h:57:29: warning: integer overflow in expression [-Woverflow] | #define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) | ^ | ../fs/binfmt_elf.c:921:16: note: in expansion of macro ELF_ET_DYN_BASE | load_bias = ELF_ET_DYN_BASE - vaddr; Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-19ARC: Adjust cpuinfo for non-continuous cpu idsNoam Camus
num_possible_cpus() returns how many CPUs may be present on system. However we want the highest possible CPU number. This may be differ in a sparsed possible CPUs map. Such map achived by OF for plat-eznps. For example if we have: possible cpus mask 0,3 Then: num_possible_cpus() is equal 2 while nr_cpu_ids is equal 4. Only for value 4 c_start() will provide correct cpuinfo at procfs. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-16ARC: [build] Support gz, lzma compressed uImageDaniel Mentz
Add support for lzma compressed uImage. Support for gzip was already available but could not be enabled because we were missing CONFIG_HAVE_KERNEL_GZIP in arch/arc/Kconfig. Signed-off-by: Daniel Mentz <danielmentz@google.com> Cc: linux-snps-arc@lists.infradead.org Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-16ARCv2: intc: untangle SMP, MCIP and IDUVineet Gupta
The IDU intc is technically part of MCIP (Multi-core IP) hence historically was only available in a SMP hardware build (and thus only in a SMP kernel build). Now that hardware restriction has been lifted, so a UP kernel needs to support it. This requires breaking mcip.c into parts which are strictly SMP (inter-core interrupts) and IDU which in reality is just another intc and thus has no bearing on SMP. This change allows IDU in UP builds and with a suitable device tree, we can have the cascaded intc system ARCv2 core intc <---> ARCv2 IDU intc <---> periperals Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-15Merge branch 'work.uaccess' into for-linusAl Viro
2016-10-08nmi_backtrace: generate one-line reports for idle cpusChris Metcalf
When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Tested-by: Petr Mladek <pmladek@suse.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07Merge tag 'pci-v4.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Summary of PCI changes for the v4.9 merge window: Enumeration: - microblaze: Add multidomain support for procfs (Bharat Kumar Gogada) Resource management: - Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie) - Ignore requested alignment for VF BARs (Yongji Xie) PCI device hotplug: - Make core explicitly non-modular (Paul Gortmaker) PCIe native device hotplug: - Rename pcie_isr() locals for clarity (Bjorn Helgaas) - Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas) - Remove unnecessary guard (Bjorn Helgaas) - Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas) - Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas) - Clear attention LED on device add (Keith Busch) - Allow exclusive userspace control of indicators (Keith Busch) - Process all hotplug events before looking for new ones (Mayurkumar Patel) - Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel) - Don't re-read Slot Status when handling surprise event (Mayurkumar Patel) - Make explicitly non-modular (Paul Gortmaker) Power management: - Afford direct-complete to devices with non-standard PM (Lukas Wunner) - Query platform firmware for device power state (Lukas Wunner) - Recognize D3cold in pci_update_current_state() (Lukas Wunner) - Avoid unnecessary resume after direct-complete (Lukas Wunner) - Make explicitly non-modular (Paul Gortmaker) Virtualization: - Mark Atheros AR9580 to avoid bus reset (Maik Broemme) - Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu) MSI: - Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto) AER: - Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas) - Remove aerdriver.forceload kernel parameter (Bjorn Helgaas) - Fix aer_probe() kernel-doc comment (Cao jin) - Add bus flag to skip source ID matching (Jon Derrick) - Avoid memory allocation in interrupt handling path (Jon Derrick) - Cache capability position (Keith Busch) - Make explicitly non-modular (Paul Gortmaker) - Remove duplicate AER severity translation (Tyler Baicar) - Send correct severity to calculate AER severity (Tyler Baicar) Precision Time Measurement: - Add Precision Time Measurement (PTM) support (Jonathan Yong) - Add PTM clock granularity information (Bjorn Helgaas) - Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas) Generic host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Make explicitly non-modular (Paul Gortmaker) Altera host bridge driver: - Remove redundant platform_get_resource() return value check (Bjorn Helgaas) - Poll for link training status after retraining the link (Ley Foon Tan) - Rework config accessors for use without a struct pci_bus (Ley Foon Tan) - Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan) - Make MSI explicitly non-modular (Paul Gortmaker) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) ARM Versatile host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Axis ARTPEC-6 host bridge driver: - Drop __init from artpec6_add_pcie_port() (Niklas Cassel) Freescale i.MX6 host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Intel VMD host bridge driver: - Add quirk for AER to ignore source ID (Jon Derrick) - Allocate IRQ lists with correct MSI-X count (Jon Derrick) - Convert to use pci_alloc_irq_vectors() API (Jon Derrick) - Eliminate vmd_vector member from list type (Jon Derrick) - Eliminate index member from IRQ list (Jon Derrick) - Synchronize with RCU freeing MSI IRQ descs (Keith Busch) - Request userspace control of PCIe hotplug indicators (Keith Busch) - Move VMD driver to drivers/pci/host (Keith Busch) Marvell Aardvark host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun) Microsoft Hyper-V host bridge driver: - Use zero-length array in struct pci_packet (Dexuan Cui) - Use pci_function_description[0] in struct definitions (Dexuan Cui) - Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui) - Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui) - Handle hv_pci_generic_compl() error case (Dexuan Cui) - Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun) NVIDIA Tegra host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Remove redundant _data suffix (Thierry Reding) - Use of_device_get_match_data() (Thierry Reding) Qualcomm host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Renesas R-Car host bridge driver: - Consolidate register space lookup and ioremap (Bjorn Helgaas) - Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven) - Add multi-MSI support (Grigory Kletsko) - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Fix some checkpatch warnings (Sergei Shtylyov) - Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov) Rockchip host bridge driver: - Add DT bindings for Rockchip PCIe controller (Shawn Lin) - Add Rockchip PCIe controller support (Shawn Lin) - Improve the deassert sequence of four reset pins (Shawn Lin) - Fix wrong transmitted FTS count (Shawn Lin) - Increase the Max Credit update interval (Rajat Jain) Samsung Exynos host bridge driver: - Make explicitly non-modular (Paul Gortmaker) ST Microelectronics SPEAr13xx host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Synopsys DesignWare host bridge driver: - Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas) - Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo) - Check LTSSM training bit before deciding link is up (Jisheng Zhang) - Move link wait definitions to .c file (Joao Pinto) - Wait for iATU enable (Joao Pinto) - Add iATU Unroll feature (Joao Pinto) - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) - Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand) - Remove redundant platform_get_resource() return value check (Wei Yongjun) TI DRA7xx host bridge driver: - Make explicitly non-modular (Paul Gortmaker) TI Keystone host bridge driver: - Propagate request_irq() failure (Wei Yongjun) Xilinx AXI host bridge driver: - Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada) - Clear interrupt register for invalid interrupt (Bharat Kumar Gogada) - Clear correct MSI set bit (Bharat Kumar Gogada) - Dispose of MSI virtual IRQ (Bharat Kumar Gogada) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) Xilinx NWL host bridge driver: - Expand error logging (Bharat Kumar Gogada) - Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada) - Make explicitly non-modular (Paul Gortmaker) Miscellaneous: - Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner) - portdrv: Make explicitly non-modular (Paul Gortmaker) - Make DPC explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits) x86/PCI: VMD: Move VMD driver to drivers/pci/host PCI: rockchip: Fix wrong transmitted FTS count PCI: rockchip: Improve the deassert sequence of four reset pins PCI: rockchip: Increase the Max Credit update interval PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot PCI/AER: Fix aer_probe() kernel-doc comment PCI: Ignore requested alignment for VF BARs PCI: Ignore requested alignment for PROBE_ONLY and fixed resources PCI: Avoid unnecessary resume after direct-complete PCI: Recognize D3cold in pci_update_current_state() PCI: Query platform firmware for device power state PCI: Afford direct-complete to devices with non-standard PM PCI/AER: Cache capability position PCI/AER: Avoid memory allocation in interrupt handling path x86/PCI: VMD: Request userspace control of PCIe hotplug indicators PCI: pciehp: Allow exclusive userspace control of indicators ACPI / APEI: Send correct severity to calculate AER severity PCI/AER: Remove duplicate AER severity translation x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs x86/PCI: VMD: Eliminate index member from IRQ list ...
2016-09-30ARC: [plat*] enables MODULE*Vineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARCv2: fix local_save_flagsVineet Gupta
Commit d9676fa152c83b ("ARCv2: Enable LOCKDEP"), changed local_save_flags() to not return raw STATUS32 but encoded in the form such that it could be fed directly to CLRI/SETI instructions. However the STATUS32.E[] was not captured correctly as it corresponds to bits [4:1] in the register and not [3:0] Fixes: d9676fa152c83b ("ARCv2: Enable LOCKDEP") Cc: Evgeny Voevodin <evgeny.voevodin@intel.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: CONFIG_NODES_SHIFT fix default valuesNoam Camus
Seem like values assigned as absolute number and not and shift value, i.e. should be 0 for one node (2^0) and 1 for couple of nodes (2^1) Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARCv2: intc: Use kflag if STATUS32.IE must be resetYuriy Kolerov
In the end of "arc_init_IRQ" STATUS32.IE flag is going to be affected by "flag" instruction but "flag" never touches IE flag on ARCv2. So "kflag" instruction must be used instead of "flag". Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Cc: stable@vger.kernel.org #4.2+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: .exit.* sections can be discarded in .eh_frame regimeVineet Gupta
We used to keep the .exit.* sections as linker would fail in final link due to references from .debug_frame which itself could not be discardrd due to the forced "write,alloc" attributes for it. | LD init/built-in.o | `.exit.text' referenced in section `.debug_frame' of arch/arc/built-in.o: defined in discarded section `.exit.text' of arch/arc/built-in.o | Makefile:949: recipe for target 'vmlinux' failed With .debug_frame now retired, this hack is no longer needed. kernel binary is now a little bit smaller as well. closes STAR 9000549913 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: dw2 unwind: enable cfi pseudo ops in string libVineet Gupta
This uses a new set of annoations viz. ENTRY_CFI/END_CFI to enabel cfi ops generation. Note that we didn't change the normal ENTRY/EXIT as we don't actually want unwind info in the trap/exception/interrutp handlers which use these, as unwinder then gets confused (it keeps recursing vs. stopping). Semantically these are leaf routines and unwinding should stop when it hits those routines. Before ------ 28.52% 1.19% 9929 hackbench libuClibc-1.0.17.so [.] __write_nocancel | ---__write_nocancel |--8.95%--EV_Trap | --8.25%--sys_write | |--3.93%--sock_write_iter ... |--2.62%--memset <==== [LEAF entry as no unwind info] ^^^^^^ After ----- 29.46% 1.24% 13622 hackbench libuClibc-1.0.17.so [.] __write_nocancel | ---__write_nocancel |--9.31%--EV_Trap | --8.62%--sys_write | |--4.17%--sock_write_iter ... |--6.19%--sys_write | --6.19%--sock_write_iter | unix_stream_sendmsg | |--1.62%--sock_alloc_send_pskb | |--0.89%--sock_def_readable | |--0.88%--_raw_spin_unlock_irqrestore | |--0.69%--memset | | ^^^^^^ <==== [now in proper callframe] | | | --0.52%--skb_copy_datagram_from_iter Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: dw2 unwind: add infrastructure for adding cfi pseudo ops to asmVineet Gupta
1. detect whether binutils supports the cfi pseudo ops 2. define conditional macros to generate the ops 3. define new ENTRY_CFI/END_CFI to annotate hand asm code. - Needed because we don't want to emit dwarf info in general ENTRY/END used by lowest level trap/exception/interrutp handlers as unwinder gets confused trying to unwind out of them. We want unwinder to instead stop when it hits onfo those routines - These provide minimal start/end cfi ops assuming routine doesn't touch stack memory/regs Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: entry: make ret_from_system_call local labelVineet Gupta
This essentially removes ENTRY() assembler annotation for this symbol since it didn't have a pairing END() This in ahead of introducing cfi pseudo ops in ENTRY/END which expects paired cfi_startproc/cfi_endproc | ../arch/arc/kernel/entry.S: Assembler messages: | ../arch/arc/kernel/entry.S:270: Error: previous CFI entry not closed (missing .cfi_endproc) | ../scripts/Makefile.build:326: recipe for target 'arch/arc/kernel/entry-arcv2.o' failed | make[4]: *** [arch/arc/kernel/entry-arcv2.o] Error 1 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: dw2 unwind: don't force dwarf 2Vineet Gupta
In .debug_frame based unwinding regime, we used to force -gdwarf-2 since kernel unwinder only claimed to handle dwarf 2. This changed since commit 6d0d506012c93d ("ARC: dw2 unwind: Don't bail for CIE.version != 1") which added some support beyond dwarf 2, atleast to handle CIE != 1 The ill-effect of -gdwarf-2 is that it forces generation of .debug_* sections, which bloats loadable modules .ko files. For the curious, this doesn't affect vmlinx binary since linker script discards .debug_* but same discard is not yet implemented for modules. So it seems we can drop the -gdwarf-2 toggle, which should not be needed anyways given that we now use .eh_frame based unwinding. I've verified using GNU 2016.09-engo10 that the actual unwind info is not different with or w/o this toggle - but the debug_* sections are gone for good. before ----- arc-linux-readelf -S q_proc.ko-unwinding-1-eh_frame-switch | grep debug [15] .debug_info PROGBITS 00000000 000300 00d08d 00 0 0 1 [16] .rela.debug_info RELA 00000000 0162a0 008844 0c I 29 15 4 [17] .debug_abbrev PROGBITS 00000000 00d38d 0005f8 00 0 0 1 [18] .debug_loc PROGBITS 00000000 00d985 000070 00 0 0 1 [19] .rela.debug_loc RELA 00000000 01eae4 0000c0 0c I 29 18 4 [20] .debug_aranges PROGBITS 00000000 00d9f5 000040 00 0 0 1 [21] .rela.debug_arang RELA 00000000 01eba4 000030 0c I 29 20 4 [22] .debug_ranges PROGBITS 00000000 00da35 000018 00 0 0 1 [23] .rela.debug_range RELA 00000000 01ebd4 000030 0c I 29 22 4 [24] .debug_line PROGBITS 00000000 00da4d 000b5b 00 0 0 1 [25] .rela.debug_line RELA 00000000 01ec04 0000cc 0c I 29 24 4 [26] .debug_str PROGBITS 00000000 00e5a8 007831 01 MS 0 0 1 after ---- Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: dw2 unwind: switch to .eh_frame based unwindingVineet Gupta
So finally after almost 8 years of dealing with .debug_frame, we are finally switching to .eh_frame. The reason being stripped kernel binaries had non-functional unwinder as .debug_frame was gone. Also, in general .eh_frame seems more common way of doing unwinding. This also folds a revert of f52e126cc747 ("ARC: unwind: ensure that .debug_frame is generated (vs. .eh_frame)") to ensure that we start getting .eh_frame Reported-by: Daniel Mentz <danielmentz@google.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: dw2 unwind: factor CIE specifics for .eh_frame/.debug_frameVineet Gupta
This paves way for switching to .eh_frame based unwindiing Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: module: support R_ARC_32_PCREL relocationVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>