summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci/serial.c
AgeCommit message (Collapse)Author
2015-01-14ARM: davinci: serial.c: remove unused serial_read_reg()Rickard Strandqvist
Remove function serial_read_reg() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-21ARM: davinci: serial: remove davinci_serial_setup_clk()Manjunathappa, Prakash
Get rid of davinci_serial_setup_clk() since its not called from multiple places now. Instead initialize clock in davinci_serial_init() itself. This also helps get rid of "serial_dev" member of struct davinci_soc_info. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Suggested-by: Sekhar Nori <nsekhar@ti.com> [nsekhar@ti.com: split removal of davinci_serial_setup_clk() into a separate patch.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-21ARM: davinci: serial: get rid of davinci_uart_configManjunathappa, Prakash
"struct davinci_uart_config" was introduced to specify UART ports brought out or enabled on the board. But none of the boards use it for that purpose and we are not going to add anymore board files, so remove the structure. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Suggested-by: Sekhar Nori <nsekhar@ti.com> [nsekhar@ti.com: split patch to remove davinci_serial_setup_clk() changes.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-07-22ARM: davinci: uart: move to devid based clk_getManjunathappa, Prakash
For modules having single clock, clk_get should be done with dev_id. But current davinci implementation handles multiple instances of the UART devices with single platform_device_register. Hence clk_get is based on con_id rather than dev_id, this is not correct. Do platform_device_register for each instance and clk_get on dev_id. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> [nsekhar@ti.com: actually stop using con_id in clk_get(), squash the patch adding OF aux data into this one] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-27ARM: davinci: serial: provide API to initialze UART clocksSekhar Nori
Provide an API to initialize a UART clock. Refactor existing davinci_serial_init() to separate out the part which enables the clock. This will later be used to help DA850 DT boot support. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-24ARM: davinci: convert platform code to use clk_prepare/clk_unpreparem-karicheri2@ti.com
As a first step towards migrating davinci platforms to use common clock framework, replace all instances of clk_enable() with clk_prepare_enable() and clk_disable() with clk_disable_unprepare(). Until the platform is switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just adds a might_sleep() call and would work without any issues. This will make it easy later to switch to common clk based implementation of clk driver from DaVinci specific driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2010-05-06Davinci: serial - conditional reset via pwremuCyril Chemparathy
With this patch, AR7 type uart ports are not reset via pwremu registers. This allows davinci_serial_init() reuse on tnetv107x soc. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06Davinci: serial - use ioremap()Cyril Chemparathy
This patch implements davinci serial cleanups towards having this code reusable on tnetv107x. The change reuses the platform data membase field to hold the remapped space. By disabling the UPF_IOREMAP flag in the platform data, we prevent the 8250 driver from repeating the ioremap. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06Davinci: serial - remove unnecessary defineCyril Chemparathy
The uart pdata array is already terminated by a zero flag field. This patch reuses this terminator and eliminates DAVINCI_MAX_NR_UARTS definition. This way, future platforms can have different number of uarts initialized via davinci_serial_init(). Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25DaVinci: remove unneeded #include'sSergei Shtylyov
There have accumulated quite a lot of them after the code reorganizations... In several cases I had to replace #include <linux/dma-mapping.h> which wasn't needed directly but happened to #include <linux/err.h> which was needed. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28davinci: Move serial platform_device into SoC-specific filesMark A. Greer
Currently, there is one set of platform_device and platform_data structures for all DaVinci SoCs. The differences in the data between the various SoCs is handled by davinci_serial_init() by checking the SoC type. However, as new SoCs appear, this routine will become more & more cluttered. To clean up the routine and make it easier to add support for new SoCs, move the platform_device and platform_data structures into the SoC-specific code and use the SoC infrastructure to provide access to the data. In the process, fix a bug where the wrong irq is used for uart2 of the dm646x. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-27davinci: serial: generalize for more SoCsKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11[ARM] 4303/3: base kernel support for TI DaVinciKevin Hilman
Add base kernel support for the TI DaVinci platform. This patch only includes interrupts, timers, CPU identification, serial support and basic power and sleep controller init. More drivers to come. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>