summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci
AgeCommit message (Collapse)Author
2015-11-10Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Olof Johansson: "A handful of fixes that came in and didn't seem warranted to go in through the 4.3-rc cycle. - MAINTAINERS updates for one of the Broadcom platforms and lpc18xx - A couple of non-critical Davinci bugfixes - A fix to reset irq affinity for TI platforms (silences a warning at reboot)" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: update lpc18xx entry with more drivers soc: ti: reset irq affinity before freeing irq ARM: cns3xxx: pci: avoid potential stack overflow ARM: davinci: clock: Correct return values for API functions ARM: davinci: re-use %*ph specifier MAINTAINERS: add entry for the Broadcom Northstar Plus SoCs
2015-10-14ARM: davinci: Add dma_mask to eDMA devicesPeter Ujfalusi
The upcoming change to merge the arch/arm/common/edma.c into drivers/dma/edma.c will need this change when booting daVinci devices in no DT mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14ARM: davinci: Use platform_device_register_full() to create pdev for eDMAPeter Ujfalusi
Convert the eDMA platform device creation to use struct platform_device_info XXXXXX __initconst and platform_device_register_full() This will allow us to cleanly specify the dma_mask for the devices in an upcoming patch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14ARM: davinci/common: Convert edma driver to handle one eDMA instance per driverPeter Ujfalusi
Currently we have one device created to handle all (maximum 2) eDMAs in the system. With this change all eDMA instance will have it's own device/driver. This change is needed for further cleanups in the eDMA driver stack since the one device/driver to handle all eDMAs in the system was not flexible enough and prevents the upcoming work. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-07ARM: davinci: clock: Correct return values for API functionsPeter Ujfalusi
Fix the values returned by the publicly used functions. These function should return 0 when they are called with clk == NULL in similar manner as the clock API does to avoid different behavior in drivers used by daVinci and other architectures. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-10-07ARM: davinci: re-use %*ph specifierAndy Shevchenko
%*ph specifier allows to dump data in hex format using the pointer to a buffer. This is suitable to use here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-09-01Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New or improved SoC support: - add support for Atmel's SAMA5D2 SoC - add support for Freescale i.MX6UL - improved support for TI's DM814x platform - misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - clk fixes for TI DM814/816X + a bunch of other changes for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: rockchip: pm: Fix PTR_ERR() argument ARM: imx: mach-imx6ul: Fix allmodconfig build clk: ti: fix for definition movement ARM: uniphier: drop v7_invalidate_l1 call at secondary entry memory: kill off set_irq_flags usage rtc: snvs: select option REGMAP_MMIO ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE ARM: BCM: Enable ARM erratum 798181 for BRCMSTB ARM: OMAP2+: Fix power domain operations regression caused by 81xx ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend ARM: rockchip: set correct stabilization thresholds in suspend ARM: rockchip: rename osc_switch_to_32k variable ARM: imx6ul: add fec MAC refrence clock and phy fixup init ARM: imx6ul: add fec bits to GPR syscon definition rtc: mxc: add support of device tree dt-binding: document the binding for mxc rtc rtc: mxc: use a second rtc clock ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback soc: mediatek: Fix SCPSYS compilation ARM: at91/soc: add basic support for new sama5d2 SoC ...
2015-09-01Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A large cleanup branch this release, with a healthy 10k negative line delta. Most of this is removal of legacy (non-DT) support of shmobile platforms. There is also removal of two non-DT platforms on OMAP, and the plat-samsung directory is cleaned out by moving most of the previously shared-location-but-not-actually-shared files from there to the appropriate mach directories instead. There are other sets of changes in here as well: - Rob Herring removed use of set_irq_flags under all platforms and moved to genirq alternatives - a series of timer API conversions to set-state interface - ep93xx, nomadik and ux500 cleanups from Linus Walleij - __init annotation fixes from Nicolas Pitre + a bunch of other changes that all add up to a nice set of cleanups" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits) ARM/fb: ep93xx: switch framebuffer to use modedb only ARM: gemini: Setup timer3 as free running timer ARM: gemini: Use timer1 for clockevent ARM: gemini: Add missing register definitions for gemini timer ARM: ep93xx/timer: Migrate to new 'set-state' interface ARM: nomadik: push accelerometer down to boards ARM: nomadik: move l2x0 setup to device tree ARM: nomadik: selectively enable UART0 on boards ARM: nomadik: move hog code to use DT hogs ARM: shmobile: Fix mismerges ARM: ux500: simplify secondary CPU boot ARM: SAMSUNG: remove keypad-core header in plat-samsung ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx ARM: SAMSUNG: local onenand-core header in mach-s3c64xx ARM: SAMSUNG: local irq-uart header in mach-s3c64xx ARM: SAMSUNG: local backlight header in mach-s3c64xx ARM: SAMSUNG: local ata-core header in mach-s3c64xx ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx ARM: SAMSUNG: local spi-core header in mach-s3c24xx ARM: SAMSUNG: local nand-core header in mach-s3c24xx ...
2015-08-14ARM: davinci: Set proper SPI prescale limit valueFranklin S Cooper Jr
SPI Davinci driver has been updated to allow SOCs to specify their minimum prescale value. Update the various SOCs board files that use this driver with their proper prescaler limit. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-05ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake ↵Sudeep Holla
callback Commit 60f96b41f71d ("genirq: Add IRQCHIP_SKIP_SET_WAKE flag") introduced a new flag to skip the irq_set_wake callback in the irqchip core to avoid adding dummy irq_set_wake in the irqchip implementations. This patch removes the dummy callback and sets the IRQCHIP_SKIP_SET_WAKE flags. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28ARM: kill off set_irq_flags usageRob Herring
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Imre Kaloz <kaloz@openwrt.org> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28ARM: appropriate __init annotation for const dataNicolas Pitre
Init data marked const should be annotated with __initconst for correctness and not __initdata. In some cases the array gathering references to that data has to be marked const as well. This fixes LTO builds that otherwise fail with section mismatch errors. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-17ARM/davinci/time: Migrate to new 'set-state' interfaceViresh Kumar
Migrate davinci driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in set_mode(RESUME) and so .tick_resume() isn't implemented. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2015-06-26Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Kevin Hilman: "A relatively small setup of cleanups this time around, and similar to last time the bulk of it is removal of legacy board support: - OMAP: removal of legacy (non-DT) booting for several platforms - i.MX: remove some legacy board files" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits) ARM: fix EFM32 build breakage caused by cpu_resume_arm ARM: 8389/1: Add cpu_resume_arm() for firmwares that resume in ARM state ARM: v7 setup function should invalidate L1 cache mach-omap2: Remove use of deprecated marco, PTR_RET in devices.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c ARM: OMAP2+: Constify irq_domain_ops ARM: OMAP2+: use symbolic defines for console loglevels instead of numbers ARM: at91: remove useless Makefile.boot ARM: at91: remove at91rm9200_sdramc.h ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h ARM: at91/pm: use the atmel-mc syscon defines pcmcia: at91_cf: Use syscon to configure the MC/smc ARM: at91: declare the at91rm9200 memory controller as a syscon mfd: syscon: Add Atmel MC (Memory Controller) registers definition ARM: at91: drop sam9_smc.c ata: at91: use syscon to configure the smc ARM: ux500: delete static resource defines ARM: ux500: rename ux500_map_io ARM: ux500: look up PRCMU resource from DT ARM: ux500: kill off L2CC static map ...
2015-06-23Merge branch 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull clkdev updates from Russell King: "This series addresses some breakage in clkdev caused by a previous patch set from the clk tree which introduced per-user clk structures. This basically renamed the existing 'struct clk' to 'struct clk_hw', and introduced a new 'struct clk'. This change will break anyone using clk_add_alias() with the common clk code enabled. Thankfully, the intersection of users of clk_add_alias() and those using the common clk code is practically zero, but this is something which should be fixed to keep the code sane. The problem is that clk_add_alias() does this: r = clk_get(...); l = clkdev_alloc(r, ...); clk_put(...); which causes the alias to store a pointer to 'r', which has been freed. The original patch set tried to work around this problem incorrectly - at clk_get() time, it tried to convert the struct clk to a struct clk_hw, and then creating a new struct clk from that. Clearly, if the original struct clk has been freed, then we have a use-after-free bug. We have other places in the tree which do something similar, so this series also addresses those locations too. This series addresses this problem by converting clkdev to store and use the clk_hw pointer. This allows clk_get() to only have to create it's per-user struct clk from the clk_hw. We can also get to the desired clk_hw at clk_add_alias() or clk lookup creation time, when the struct clk is "alive". We also perform some cleanups of the code: - replacing looped calls to clkdev_add() with clkdev_add_table() - replacing open-coded lookup allocation (which should have been using clkdev_alloc()) and subsequent clkdev_add() with clkdev_create() - replacing open-coded clk_add_alias() with clk_add_alias()" * 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: clk: s2mps11: use clkdev_create() ASoC: migor: use clkdev_create() ARM: omap2: use clkdev_add_alias() ARM: omap2: use clkdev_create() ARM: orion: use clkdev_create() ARM: lpc32xx: convert to use clkdev_add_table() SH: use clkdev_add_table() clkdev: add clkdev_create() helper clkdev: const-ify connection id to clk_add_alias() clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h clkdev: drop __init from clkdev_add_table() clk: update clk API documentation to clarify clk_round_rate() clkdev: use clk_hw internally
2015-05-14ARM: Show proper respect for Heinrich Hertz by using the correct unit for ↵Russell King
frequency The SI unit of frequency is Hertz, named after Heinrich Hertz, and is given the symbol "Hz" to denote this. "hz" is not the unit of frequency, and is in fact meaningless. Fix arch/arm to correctly use "Hz", thereby acknowledging Heinrich Hertz' contribution to the modern world. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-12arm: davinci: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPSRajendra Nayak
USE_PM_CLK_RUNTIME_OPS is introduced so we don't repeat the same code to do runtime_suspend and runtime_resume across users of PM clocks. Use it to remove the boilerplate code. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-06clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.hRussell King
clk_add_alias() is provided by clkdev, and is not part of the clk API. Howver, it is prototyped in two locations: linux/clkdev.h and linux/clk.h. This is a mess. Get rid of the redundant and unnecessary version in linux/clk.h. Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-22Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As always, this tends to be one of our bigger branches. There are lots of updates this release, but not that many jumps out as something that needs more detailed coverage. Some of the highlights are: - DTs for the new Annapurna Labs Alpine platform - more graphics DT pieces falling into place on Exynos, bridges, clocks. - plenty of DT updates for Qualcomm platforms for various IP blocks - some churn on Tegra due to switch-over to tool-generated pinctrl data - misc fixes and updates for Atmel at91 platforms - various DT updates to add IP block support on Broadcom's Cygnus platforms - more updates for Renesas platforms as DT support is added for various IP blocks (IPMMU, display, audio, etc)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits) ARM: dts: alpine: add internal pci Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135." ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB ARM: dts: qcom: Add idle state device nodes for 8064 ARM: dts: qcom: Add idle states device nodes for 8084 ARM: dts: qcom: Add idle states device nodes for 8974/8074 ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs devicetree: bindings: Document qcom,idle-states devicetree: bindings: Update qcom,saw2 node bindings dt-bindings: Add #defines for MSM8916 clocks and resets arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974 arm: dts: qcom: Add LCC nodes arm: dts: qcom: Add TCSR support for MSM8960 arm: dts: qcom: Add TCSR support for MSM8660 arm: dts: qcom: Add TCSR support for IPQ8064 ...
2015-04-22Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "We've got a fairly large cleanup branch this time. The bulk of this is removal of non-DT platforms of several flavors: - Atmel at91 platforms go full-DT, with removal of remaining board-file based support - OMAP removes legacy board files for three more platforms - removal of non-DT mach-msm, newer Qualcomm platforms now live in mach-qcom - Freescale i.MX25 also removes non-DT platform support" Most of the rest of the changes here are fallout from the above, i.e. for example removal of drivers that now lack platforms, etc. * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits) mmc: Remove msm_sdcc driver gpio: Remove gpio-msm-v1 driver ARM: Remove mach-msm and associated ARM architecture code ARM: shmobile: cpuidle: Remove the pointless default driver ARM: davinci: dm646x: Add interrupt resource for McASPs ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x ARM: davinci: dm646x: Clean up the McASP DMA resources ARM: davinci: devices-da8xx: Add support for McASP2 on da830 ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request ARM: OMAP2+: Remove legacy support for omap3 TouchBook ARM: OMAP3: Remove legacy support for devkit8000 ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board ARM: shmobile: Consolidate the pm code for R-Car Gen2 ARM: shmobile: r8a7791: Correct SYSCIER value ARM: shmobile: r8a7790: Correct SYSCIER value ARM: at91: remove old setup ARM: at91: sama5d4: remove useless map_io ARM: at91: sama5 use SoC detection infrastructure ...
2015-03-24wlcore: remove wl12xx_platform_dataEliad Peller
Now that we have wlcore device-tree bindings in place (for both wl12xx and wl18xx), remove the legacy wl12xx_platform_data struct, and move its members into the platform device data (that is passed to wlcore) Davinci 850 is the only platform that still set the platform data in the legacy way (and doesn't have DT bindings), so remove the relevant code/Kconfig option from the board file (as suggested by Sekhar Nori) Since no one currently uses wlcore_spi, simply remove its platform data support (DT bindings will have to be added if someone actually needs it) Signed-off-by: Luciano Coelho <luca@coelho.fi> Signed-off-by: Eliad Peller <eliad@wizery.com> Tested-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-24wl12xx: use frequency instead of enumerations for pdata clocksLuciano Coelho
Instead of defining an enumeration with the FW specific values for the different clock rates, use the actual frequency instead. Also add a boolean to specify whether the clock is XTAL or not. Change all board files to reflect this. Signed-off-by: Luciano Coelho <luca@coelho.fi> [Eliad - small fixes, update board file changes] Signed-off-by: Eliad Peller <eliad@wizery.com> Tested-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-23ARM: cpuidle: Remove duplicate header inclusionDaniel Lezcano
The cpu_do_idle() function is always used by the cpuidle drivers. That led to have each driver including cpuidle.h and proc-fns.h, they are always paired. That makes a lot of duplicate headers inclusion. Instead of including both in each .c file, move the proc-fns.h header inclusion in the cpuidle.h header file directly, so we can save some line of code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-03-19wlcore: set irq_trigger in board files instead of hiding behind a quirkLuciano Coelho
The platform_quirk element in the platform data was used to change the way the IRQ is triggered. When set, the EDGE_IRQ quirk would change the irqflags used and treat edge trigger differently from the rest. Instead of hiding this irq flag setting behind the quirk, have the board files set the irq_trigger explicitly. This will allow us to use standard irq DT definitions later on. Signed-off-by: Luciano Coelho <luca@coelho.fi> [Eliad - rebase, add irq_trigger field and pass it, update board file changes] Signed-off-by: Eliad Peller <eliad@wizery.com> Tested-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-18ARM: davinci: dm646x: Add interrupt resource for McASPsPeter Ujfalusi
The interrupt can be used for error recovery. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-03-18ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646xPeter Ujfalusi
McASP1 TX interrupt is 30, not 32 on DM646x DMSoC. While at it remove the bogus AEMIF interrupt entry from dm646x_default_priorities[]. AEMIF interrupt on DM6467 is 60 not 30 and the entry for the correct interrupt number is already present in the same table. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [nsekhar@ti.com: remove bogus entry from dm646x_default_priorities[]] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-03-18ARM: davinci: dm646x: Clean up the McASP DMA resourcesPeter Ujfalusi
Add names to the DMA resources and remove the RX DMA dummy part for McASP1. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-03-18ARM: davinci: devices-da8xx: Add support for McASP2 on da830Peter Ujfalusi
da830 has three McASP blocks. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-03-18ARM: davinci: devices-da8xx: Clean up and correct the McASP device creationPeter Ujfalusi
Both DA830 and DA850 has McASP0 module, so do not restrict the use of McASP0 for da850 only. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-03-18ARM: davinci: devices-da8xx: Add interrupt resource to McASP structsPeter Ujfalusi
On da8xx McASP TX/RX interrupt requests are combined. The interrupt can be used for error recovery. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-03-18ARM: davinci: devices-da8xx: Add resource name for the McASP DMA requestPeter Ujfalusi
Add "tx" or "rx" as resource name for the DMA resources. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-02-19ARM: make of_device_ids constUwe Kleine-König
of_device_ids (i.e. compatible strings and the respective data) are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs in arch/arm as const, too. While at it also add some __initconst annotations. Acked-by: Jason Cooper <jason@lakedameon.net> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-18ARM: davinci: multi-soc kernels require AUTO_ZRELADDRArnd Bergmann
The davinci DA8xx and DMx families have incompatible zreladdr settings, and attempting to build a kernel with both enabled results in an error unless AUTO_ZRELADDR is set: multiple zreladdrs: 0xc0008000 0x80008000 This needs CONFIG_AUTO_ZRELADDR to be set This patch changes Kconfig to make the two families mutually exclusive when this is unset. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2015-02-18ARM: davinci: davinci_cfg_reg cannot be initArnd Bergmann
davinci_cfg_reg gets called from a lot of locations that might get called after the init section has been discarded, so the function itself must not be marked __init either. The kernel build currently warns about this with lots of messages like: WARNING: vmlinux.o(.text.unlikely+0x24c): Section mismatch in reference from the function dm365evm_mmc_configure() to the function .init.text:davinci_cfg_reg() The function dm365evm_mmc_configure() references the function __init davinci_cfg_reg(). This is often because dm365evm_mmc_configure lacks a __init annotation or the annotation of davinci_cfg_reg is wrong. This removes the extraneous __init_or_module annotation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2015-01-20ARM: davinci: Remove CDCE949 driverRickard Strandqvist
Remove driver CDCE949 because it is not used anywhere in kernel. It has remained unused for last 5 years. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> [nsekhar@ti.com: remove additional cdce949 support vestiges and minor updates to commit text] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-01-14ARM: davinci: serial.c: remove unused serial_read_reg()Rickard Strandqvist
Remove function serial_read_reg() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-12-19Merge tag 'pm+acpi-3.19-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ...
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-12ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere in the code under arch/arm/ (the defconfig files will be modified later). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-12-11Merge tag 'media/v3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Two new dvb frontend drivers: mn88472 and mn88473 - A new driver for some PCIe DVBSky cards - A new remote controller driver: meson-ir - One LIRC staging driver got rewritten and promoted to mainstream: igorplugusb - A new tuner driver (m88rs6000t) - The old omap2 media driver got removed from staging. This driver uses an old DMA API and it is likely broken on recent kernels. Nobody cared enough to fix it - Media bus format moved to a separate header, as DRM will also use the definitions there - mem2mem_testdev were renamed to vim2m, in order to use the same naming convention taken by the other virtual test driver (vivid) - Added a new driver for coda SoC (coda-jpeg) - The cx88 driver got converted to use videobuf2 core - Make DMABUF export buffer to work with DMA Scatter/Gather and Vmalloc cores - Lots of other fixes, improvements and cleanups on the drivers. * tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (384 commits) [media] mn88473: One function call less in mn88473_init() after error [media] mn88473: Remove uneeded check before release_firmware() [media] lirc_zilog: Deletion of unnecessary checks before vfree() [media] MAINTAINERS: Add myself as img-ir maintainer [media] img-ir: Don't set driver's module owner [media] img-ir: Depend on METAG or MIPS or COMPILE_TEST [media] img-ir/hw: Drop [un]register_decoder declarations [media] img-ir/hw: Fix potential deadlock stopping timer [media] img-ir/hw: Always read data to clear buffer [media] redrat3: ensure dma is setup properly [media] ddbridge: remove unneeded check before dvb_unregister_device() [media] si2157: One function call less in si2157_init() after error [media] tuners: remove uneeded checks before release_firmware() [media] arm: omap2: rx51-peripherals: fix build warning [media] stv090x: add an extra protetion against buffer overflow [media] stv090x: Remove an unreachable code [media] stv090x: Some whitespace cleanups [media] em28xx: checkpatch cleanup: whitespaces/new lines cleanups [media] si2168: add support for firmware files in new format [media] si2168: debug printout for firmware version ...
2014-12-11Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
2014-11-18ARM: davinci: Remove redundant castsRasmus Villemoes
These casts to char* are unnecessary and slightly confusing, since both operands actually have type const char*. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-11-18ARM: davinci: Use standard logging stylesJoe Perches
Convert printks to pr_<level> and pr_warning to pr_warn. Other miscellanea: o Coalesce formats o Realign arguments o Use %s, __func__ instead of embedded function names o Add pr_fmt to mityomapl138 and mux Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-11-14[media] platform: Make use of media_bus_format enumBoris BREZILLON
In order to have subsytem agnostic media bus format definitions we've moved media bus definition to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Reference new definitions in all platform drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-12cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logicDaniel Lezcano
The only place where the time is invalid is when the ACPI_CSTATE_FFH entry method is not set. Otherwise for all the drivers, the time can be correctly measured. Instead of duplicating the CPUIDLE_FLAG_TIME_VALID flag in all the drivers for all the states, just invert the logic by replacing it by the flag CPUIDLE_FLAG_TIME_INVALID, hence we can set this flag only for the acpi idle driver, remove the former flag from all the drivers and invert the logic with this flag in the different governor. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-20ARM: mach-davinci: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-08Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Arnd Bergmann: "As usual, this is the largest branch, though this time a little under half of the total changes with 307 individual non-merge changesets. The largest changes are the addition of new machines, in particular the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support for the old i.MX1 platform. Other changes include - at91: various sam9 and sama5 updates - exynos: much extended Peach Pi/Pit (Chromebook 2) support - keystone: new peripherals - meson: added DT for meson6 SoC - mvebu: new device support for Armada 370/375 - qcom: improved support for IPQ8064 and MSM8x60 - rockchip: much improved support for rk3288 - shmobile: lots of updates all over the place - sunxi: dts license change - sunxi: more a23 device support - vexpress: CLCD DT description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits) ARM: DTS: meson: update DTSI to add watchdog node ARM: dts: keystone-k2l: fix mdio io start address ARM: dts: keystone-k2e: fix mdio io start address ARM: dts: keystone-k2e: update usb1 node for dma properties ARM: dts: keystone: fix io range for usb_phy0 Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt" Revert "ARM: dts: hix5hd2: add wdg node" ARM: dts: add rk3288 i2s controller ARM: vexpress: Add CLCD Device Tree properties ARM: bcm2835: add I2S pinctrl to device tree ARM: meson: documentation: add bindings documentation ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS ARM: dts: mt6589: Change compatible string for GIC ARM: dts: mediatek: Add compatible property for aquaris5 ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk ARM: dts: mt6589: Fix typo in GIC unit address ARM: dts: Build dtb for Mediatek board ARM: dts: keystone: fix bindings for pcie and usb clock nodes ARM: dts: keystone: k2l: Fix chip selects for SPI devices ARM: dts: keystone: add dsp gpio controllers nodes ...
2014-08-26ARM: davinci: board-da850-evm: Add needed regulators for tlv320aic3106 codecPeter Ujfalusi
IOVDD: tps65070's dcdc2 AVDD and DRVDD: fixed regulator derived from 5V via TPS73701DCQ DVDD: fixed regulator derived from 5V via TPS73701DCQ This patch needed to be able to probe the audio codec. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-08-26ARM: davinci: board-da850-evm: Mark dcdc2 of TPS65070 as always_onPeter Ujfalusi
DCDC2 should not be turned off since it is powering the CPU among other things. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-08-26ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for mcasp0Peter Ujfalusi
Add OF_DEV_AUXDATA for mcasp to be able to use clocks. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>