summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/clk-imx6sl.c
AgeCommit message (Collapse)Author
2014-06-17ARM: imx6sl: add missing enet clock for imx6slFugang Duan
There's a enet clock gate missing in clock tree, thus add it. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-30ARM: imx: factor device tree timer initializationGilles Chanteperdrix
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-03-05ARM: imx: avoid calling clk APIs in idle thread which may cause scheduleAnson Huang
As clk_pllv3_wait_lock will call usleep_range, and the clk APIs mutex lock may be held when CPU entering idle, so calling clk APIs must be avoided in cpu idle thread, this is to avoid reschedule warning in cpu idle, just access register directly to achieve that. bad: scheduling from the idle thread! CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc1+ #657 Backtrace: [<80012188>] (dump_backtrace) from [<8001246c>] (show_stack+0x18/0x1c) r6:808c0038 r5:00000000 r4:808e5a1c r3:00000000 [<80012454>] (show_stack) from [<8064b2ec>] (dump_stack+0x84/0x9c) [<8064b268>] (dump_stack) from [<80055ee0>] (dequeue_task_idle+0x20/0x30) r5:808bef40 r4:bf7dff40 [<80055ec0>] (dequeue_task_idle) from [<8004f028>] (dequeue_task+0x30/0x50) r4:bf7dff40 r3:80055ec0 [<8004eff8>] (dequeue_task) from [<800503c0>] (deactivate_task+0x30/0x34) r4:bf7dff40 [<80050390>] (deactivate_task) from [<8064d8e4>] (__schedule+0x2c8/0x5c0) [<8064d61c>] (__schedule) from [<8064dc14>] (schedule+0x38/0x88) r10:80912964 r9:808c1e50 r8:808c0038 r7:808cbf30 r6:80e128ec r5:60000093 r4:80912968 [<8064dbdc>] (schedule) from [<8064dfec>] (schedule_preempt_disabled+0x10/0x14) [<8064dfdc>] (schedule_preempt_disabled) from [<8064ebc0>] (mutex_lock_nested+0x1c0/0x3c0) [<8064ea00>] (mutex_lock_nested) from [<804ae71c>] (clk_prepare_lock+0x44/0xe4) r10:806554cc r9:bf7df1bc r8:808cf4f8 r7:808cf544 r6:bf7df1b8 r5:808c0010 r4:80e69750 [<804ae6d8>] (clk_prepare_lock) from [<804af214>] (clk_get_rate+0x14/0x64) r6:bf7df1b8 r5:00000002 r4:bf017000 r3:80922ad0 [<804af200>] (clk_get_rate) from [<80025d30>] (imx6sl_set_wait_clk+0x18/0x20) r5:00000002 r4:00000001 [<80025d18>] (imx6sl_set_wait_clk) from [<80023454>] (imx6sl_enter_wait+0x20/0x48) [<80023434>] (imx6sl_enter_wait) from [<80477c24>] (cpuidle_enter_state+0x44/0xfc) r4:3c386e48 r3:80023434 [<80477be0>] (cpuidle_enter_state) from [<80477dd8>] (cpuidle_idle_call+0xfc/0x160) r8:808cf4f8 r7:00000001 r6:80e69534 r5:00000000 r4:bf7df1b8 [<80477cdc>] (cpuidle_idle_call) from [<8000f61c>] (arch_cpu_idle+0x10/0x50) r9:808c0000 r8:00000000 r7:80921a89 r6:808c8938 r5:808c899c r4:808c0000 [<8000f60c>] (arch_cpu_idle) from [<8006fa94>] (cpu_startup_entry+0x108/0x160) [<8006f98c>] (cpu_startup_entry) from [<806452ac>] (rest_init+0xb4/0xdc) r7:808afae0 [<806451f8>] (rest_init) from [<8086fb58>] (start_kernel+0x328/0x38c) r6:ffffffff r5:808c8880 r4:808c8a30 [<8086f830>] (start_kernel) from [<80008074>] (0x80008074) Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add always-on clock array for i.mx6sl to maintain correct usecountAnson Huang
IPG, ARM and MMDC's clock should be enabled during kernel boot up, so we need to maintain their usecount, otherwise, they may be disabled unexpectedly if their children's clock are turned off, and caused their parent PLLs also get disabled, which is incorrect. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: clk-imx6sl: Suppress duplicate const sparse warningLiu Ying
There should be no duplicate const specifiers for those static constant character string arrays defined for clock mux options. Also, the arrays are only taken as the 5th argument for the imx_clk_mux() function, which is in the type of 'const char **parents'. So, let's remove the 2nd const specifier right after 'char'. This patch fixes these sparse warnings: arch/arm/mach-imx/clk-imx6sl.c:21:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:22:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:23:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:24:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:25:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:26:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:27:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:28:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:29:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:30:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:31:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:32:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:33:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:34:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:35:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:36:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:37:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:38:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:39:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:40:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:41:25: warning: duplicate const Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: add cpuidle support for i.mx6slAnson Huang
Add cpuidle support for i.MX6SL, currently only support two cpuidle levels(ARM wfi and WAIT mode), and add software workaround for WAIT mode errata as below: ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken during WAIT mode entry process could cause cache memory corruption. Software workaround: To prevent this issue from occurring, software should ensure that the ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before entering WAIT mode. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-03-05ARM: imx: AHB rate must be set to 132MHz on i.mx6slAnson Huang
The reset value of AHB divider is 3, so current AHB rate is 99MHz which is not correct for kernel, need to ensure AHB rate is 132MHz in clk driver, as ipg is sourcing from AHB, and it should be 66MHz by default. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-10ARM: imx6: Initialize low-power mode early againPhilipp Zabel
Since commit 9e8147bb5ec5d1dda2141da70f96b98985a306cb "ARM: imx6q: move low-power code out of clock driver" the kernel fails to boot on i.MX6Q/D if preemption is enabled (CONFIG_PREEMPT=y). The kernel just hangs before the console comes up. The above commit moved the initalization of the low-power mode setting (enabling clocked WAIT states), which was introduced in commit 83ae20981ae924c37d02a42c829155fc3851260c "ARM: imx: correct low-power mode setting", from imx6q_clks_init to imx6q_pm_init. Now it is called much later, after all cores are enabled. This patch moves the low-power mode initialization back to imx6q_clks_init again (and to imx6sl_clks_init). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-31ARM: imx6sl: Add missing spba clock to clock treeNicolin Chen
We are missing spba clock in imx6sl's clock tree, thus add it. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-31ARM: imx6sl: Add missing pll4_audio_div to the clock treeNicolin Chen
There's a dividor for pll4_audio clock missing in clock tree, thus add it. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-31ARM: imx6: Derive spdif clock from pll3_pfd3_454mNicolin Chen
SPDIF can derive a TX clock for playback from one of its clock sources -- spdif root clock to match its supporting sample rates. So this patch set the spdif root clock's parent to pll3_pfd3_454m since the pll3_pfd3_454m can approximately meet its sample rate requirement. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-31ARM: imx: rename IMX6SL_CLK_CLK_END to IMX6SL_CLK_ENDShawn Guo
The macro name IMX6SL_CLK_CLK_END is a little insane. Rename it to IMX6SL_CLK_END. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-21ARM: imx: enable suspend for imx6slShawn Guo
The imx6sl low power mode implementation inherits imx6q/dl one, and pm-imx6q.c can just work for imx6sl with some minor updates. Let's enable imx6sl suspend support by reusing pm-imx6q.c and use cpu_is_imxXX() to handle the those minor differences between imx6sl and imx6q/dl. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: imx6: change some clocks to fixup clocksLiu Ying
All the clocks controlled by the register 'CCM Serial Clock Multiplexer Register 1' should be fixup clocks. This patch changes those clocks from basic multiplexer or divider clocks to fixup clocks. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx6: use common of_clk_init() call to initialize clocksShawn Guo
Instead of explicitly calling clock initialization functions, we can declare the functions with CLK_OF_DECLARE() and then call common of_clk_init() to have them invoked properly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17ARM: imx: add clock support for imx6slShawn Guo
Add clock support for i.MX6 SoloLite. It uses the dtc marco support to define all clock IDs in imx6sl-clock.h, which will be included by both clock driver and device tree sources, so that the data will stay sync all the time between kernel and DT. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v0.10.2 at 2024-07-22 01:31:15 (GMT)