summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
AgeCommit message (Collapse)Author
2011-09-15OMAP3+: voltage domain: move PMIC struct from vdd_info into struct voltagedomainKevin Hilman
Move structure containing PMIC configurable settings into struct voltagedomain. In the process, rename from omap_volt_pmic_info to omap_voltdm_pmic (_info suffix is not helpful.) No functional changes. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3+: VC: abstract out channel configurationKevin Hilman
VC channel configuration is programmed based on settings coming from the PMIC configuration. Currently, the VC channel to PMIC mapping is a simple one-to-one mapping. Whenever a VC channel parameter is configured (i2c slave addres, PMIC register address, on/ret/off command), the corresponding bits are enabled in the VC channel configuration register. If necessary, the programmability of channel configuration settings could be extended to board/PMIC files, however, because this patch changes the channel configuration to be programmed based on existing values from the PMIC settings, it may not be required. Also note that starting with OMAP4, where there are more than 2 channels, one channel is identified as the "default" channel. When any of the bits in the channel config for the other channels are zero, it means to use the default channel. The OMAP4 TRM (at least through NDA version Q) is wrong in describing which is the default channel. The default channel on OMAP4 is MPU, not CORE as decribed in the TRM. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3+: VC: move on/onlp/ret/off command configuration into common initKevin Hilman
Configuring the on/onlp/ret/off command values is common to OMAP3 & 4. Move from OMAP3-only init into common VC init. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3+: VC: cleanup voltage setup time configurationKevin Hilman
- add setup_time field to struct omap_vc_channel (init'd from PMIC data) - use VC/VP register access helper for read/modify/write - move VFSM structure from omap_vdd_info into struct voltagedomain - remove redunant _data suffix from VFSM structures and variables - remove voltsetup_shift, use ffs() on the mask value to find the shift Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3+: VC bypass: use fields from VC struct instead of PMIC infoKevin Hilman
The PMIC configurable variables should be isolated to VC initialization. The rest of the VC functions (like VC bypass) should use the i2c slave address and voltage register address fields from struct omap_vc_channel. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3+: VC: cleanup PMIC register address configurationKevin Hilman
- support both voltage register address and command register address for each VC channel - add fields for voltage register address (volra) and command register address (cmdra) to struct omap_vc_channel - use VC/VP register access read/modify/write helper - remove volra_shift field (use __ffs(mask) for shift value) - I2C addresses 10-bit, change size to u16 Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3+: VC: cleanup i2c slave address configurationKevin Hilman
- Add an i2c_slave_address field to the omap_vc_channel - use VC/VP read/modify/write helper instead of open-coding - remove smps_sa_shift, use __ffs(mask) for shift value - I2C addresses 10-bit, change size to u16 Special thanks to Shweta Gulati <shweta.gulati@ti.com> for suggesting the use of __ffs(x) instead of ffs(x) - 1. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3+: voltage: convert to PRM register access functionsKevin Hilman
Convert VC/VP register access to use PRM VC/VP accessor functions. In the process, move the read/write function pointers from vdd_info into struct voltagedomain. No functional changes. Additional cleanup: - remove prm_mod field from VC/VP data structures, the PRM register access functions know which PRM module to use. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: PRM: add register access functions for VC/VPKevin Hilman
On OMAP3+, the voltage controller (VC) and voltage processor (VP) are inside the PRM. Add some PRM helper functions for register access to these module registers. Thanks to Nishanth Menon for finding/fixing a sparse problem. Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3+ VP: replace transaction done check/clear with VP opsKevin Hilman
Replace the VP tranxdone check/clear with helper functions from the PRM layer. In the process, remove prm_irqst_* voltage structure fields for IRQ status checking which are no longer needed. Since these reads/writes of the IRQ status bits were the only PRM accesses that were not to VC/VP registers, this allows the rest of the register accesses in the VC/VP code to use VC/VP specific register access functions (done in the following patch.) Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: add PRM VP functions for checking/clearing VP TX done statusKevin Hilman
Add SoC specific PRM VP helper functions for checking and clearing the VP transaction done status. Longer term, these events should be handled by the forthcoming PRCM interrupt handler. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: VC: support PMICs with separate voltage and command registersKevin Hilman
The VC layer can support PMICs with separate voltage and command registers by putting the different registers in the PRM_VC_SMPS_VOL_RA and PRCM_VC_SMPS_CMD_RA registers respectively. The PMIC data must supply at least a voltage register address (volt_reg_addr). The command register address (cmd_reg_addr) is optional. If the PMIC data does not supply a separate command register address, the VC will use the voltage register address for both. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: voltage: split out voltage processor (VP) code into new layerKevin Hilman
This patch is primarily a move of VP specific code from voltage.c into its own code in vp.c and adds prototypes to vp.h No functional changes, except debugfs... VP debugfs moved to 'vp' subdir of <debugfs>/voltage/ and 'vp_' prefixes removed from all debugfs filenames. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: voltage: enable VC bypass scale method when VC is initializedKevin Hilman
VC is initialized first, set default scaling method to VC bypass. If/when VP is initialized, default scaling method will be changed to VP force-update. Enabling VC bypass as default as soon as VC is initialized allows for VC bypass scaling to work when no VP is configured/initialized for a given voltage domain. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: voltage: move VC into struct voltagedomain, misc. renamesKevin Hilman
Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman <khilman@ti.com> merge
2011-09-15OMAP2+: voltage: split voltage controller (VC) code into dedicated layerKevin Hilman
As part of the voltage layer cleanup, split out VC specific code into a dedicated VC layer. This patch primarily just moves VC code from voltage.c into vc.c, and adds prototypes to vc.h. No functional changes. For readability, each function was given a local 'vc' pointer: struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; and a global replace of s/vdd->vc_data/vc/ was done. Also vc_init was renamed to vc_init_channel to reflect that this is per-VC channel initializtion. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: voltage: keep track of powerdomains in each voltagedomainKevin Hilman
When a powerdomain is registered and it has an associated voltage domain, add the powerdomain to the voltagedomain using voltdm_add_pwrdm(). Also add voltagedomain iterator helper functions to iterate over all registered voltagedomains and all powerdomains associated with a voltagedomain. Modeled after a similar relationship between clockdomains and powerdomains. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: powerdomain: add voltage domain lookup during registerKevin Hilman
When a powerdomain is registered, lookup the voltage domain by name and keep a pointer to the containing voltagedomain in the powerdomain structure. Modeled after similar method between powerdomain and clockdomain layers. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP4: powerdomain data: add voltage domainsBenoit Cousson
Add voltage domain name to indicate which voltagedomain each powerdomain is in. The fixed voltage domain like ldo_wakeup for emu and wkup power domain is added too. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [khilman@ti.com]: renamed wakeup domain: s/ldo_wakeup/wakeup/ Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3: powerdomain data: add voltage domainsKevin Hilman
Add voltage domain name to indicate which voltagedomain each powerdomain is in. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2: add voltage domains and connect to powerdomainsKevin Hilman
Create basic voltagedomains for OMAP2 and associate OMAP2 powerdomains with the newly created voltage domains. While here, update copyright on powerdomain data to 2011. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: powerdomain: add voltagedomain to struct powerdomainKevin Hilman
Each powerdomain is associated with a voltage domain. Add an entry to struct powerdomain where the enclosing voltagedomain can be referenced. Modeled after similar relationship between clockdomains and powerdomains. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3+: voltage: add scalable flag to voltagedomainKevin Hilman
Add a 'bool scalable' flag to the struct powerdomain and set it for the scalable domains on OMAP3 and OMAP4. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3: voltagedomain data: add wakeup domainKevin Hilman
Add wakeup voltage domain so that the wakeup powerdomain can have an associated powerdomain. Note that the scalable flat is not set for the this voltagedomain, so it will not be fully initialized like scalable voltage domains. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP3: voltage: rename "mpu" voltagedomain to "mpu_iva"Kevin Hilman
This voltage domain (a.k.a. VDD1) contains both the MPU and the IVA, so rename appropriately. Also fixup any users of the "mpu" name to use "mpu_iva" Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: voltage: start towards a new voltagedomain layerKevin Hilman
Start cleaning up the voltage layer to have a voltage domain layer that resembles the structure of the existing clock and power domain layers. To that end: - move the 'struct voltagedomain' out of 'struct omap_vdd_info' to become the primary data structure. - convert any functions taking a pointer to struct omap_vdd_info into functions taking a struct voltagedomain pointer. - convert the register & initialize of voltage domains to look like that of powerdomains - convert omap_voltage_domain_lookup() to voltdm_lookup(), modeled after the current powerdomain and clockdomain lookup functions. - omap_voltage_late_init(): only configure VDD info when the vdd_info struct is non-NULL Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: voltage: move prm_irqst_reg from VP into voltage domainKevin Hilman
The prm_irqst_reg is not part of the VP. Move it up into the common voltage domain struct. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15OMAP2+: voltage: move PRCM mod offets into VC/VP structuresKevin Hilman
Eliminate need for global variables for the various PRM module offsets by making them part of the VP/VC common structures Eventually, these will likely be moved again, or more likely removed when VP/VC code is isolated, but for now just getting rid of them as global variabes so that the voltage domain initialization can be cleaned up. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-14OMAP: powerdomain: remove omap_chip bitmasksPaul Walmsley
At Tony's request, remove the omap_chip bitmasks from the powerdomain definitions. Instead, initialize powerdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Gražvydas Ignotas <notasas@gmail.com> found and reported a bug in a related patch that also applied to this patch - thanks Gražvydas. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Gražvydas Ignotas <notasas@gmail.com>
2011-09-14OMAP: powerdomain: split pwrdm_init() into two functionsPaul Walmsley
In preparation for OMAP_CHIP() removal, split pwrdm_init() into three functions. This allows some of them to be called multiple times: for example, pwrdm_register_pwrdms() can be called once to register powerdomains that are common to a group of SoCs, and once to register powerdomains that are specific to a single SoC. The appropriate order to call these functions - which is enforced by the code - is: 1. pwrdm_register_platform_funcs() 2. pwrdm_register_pwrdms() (can be called multiple times) 3. pwrdm_complete_init() Convert the OMAP2, 3, and 4 powerdomain init code to use these new functions. While here, improve documentation, and increase CodingStyle conformance by shortening some local variable names. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-09-14OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomainPaul Walmsley
At Tony's request, remove the omap_chip bitmasks from the clockdomain and clockdomain dependency definitions. Instead, initialize clockdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Tony Lindgren <tony@atomide.com> found a bug in a previous version of this patch - thanks Tony. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2011-09-14OMAP: clockdomain: split clkdm_init()Paul Walmsley
In preparation for OMAP_CHIP() removal, split clkdm_init() into four functions. This allows some of them to be called multiple times: for example, clkdm_register_clkdms() can be called once to register clockdomains that are common to a group of SoCs, and once to register clockdomains that are specific to a single SoC. The appropriate order to call these functions - which is enforced by the code - is: 1. clkdm_register_platform_funcs() 2. clkdm_register_clkdms() (can be called multiple times) 3. clkdm_register_autodeps() (optional; deprecated) 4. clkdm_complete_init() Convert the OMAP2, 3, and 4 clockdomain init code to use these new functions. While here, improve documentation, and increase CodingStyle conformance by shortening some local variable names. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-09-14OMAP3: id: remove duplicate code for testing SoC ES levelPaul Walmsley
omap3_cpuinfo() contains essentially duplicated code from omap3_check_revision(), just for the purpose of determining the chip ES level. Set the cpu_rev char array pointer in omap3_check_revision() instead, and drop the now-useless code from omap3_cpuinfo(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-14OMAP3: id: add fallthrough warning; fix some CodingStyle issuesPaul Walmsley
Emit a warning to the console in omap3_check_revision() if that code cannot determine what type of SoC the system is currently running on. Remove some extra whitespace, remove some duplicate code, and add an appropriate comment to a fallthrough case. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Hemant Pedanekar <hemantp@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-14OMAP3: id: use explicit omap_revision codes for 3505/3517 ES levelsPaul Walmsley
Use explicit revision codes for OMAP/AM 3505/3517 ES levels, as the rest of the OMAP2+ SoCs do in mach-omap2/cpu.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sanjeev Premi <premi@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-14OMAP3: id: remove useless strcpy()sPaul Walmsley
omap3_cpuinfo() is filled with useless strcpy() calls; remove them. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sanjeev Premi <premi@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-14OMAP3: id: remove identification codes that only correspond to marketing namesPaul Walmsley
The OMAP3505/AM3505 appears to be based on the same silicon as the OMAP3517/AM3517, with some features disabled via eFuse bits. Follow the same practice as OMAP3430 and identify these devices internally as part of the OMAP3517/AM3517 family. The OMAP3503/3515/3525/3530 chips appear to be based on the same silicon as the OMAP3430, with some features disabled via eFuse bits. Identify these devices internally as part of the OMAP3430 family. Remove the old OMAP35XX_CLASS, which actually covered two very different chip families. The OMAP3503/3515/3525/3530 chips will now be covered by OMAP343X_CLASS, since the silicon appears to be identical. For the OMAP3517/AM3517 family, create a new class, OMAP3517_CLASS. Thanks to Tony Lindgren <tony@atomide.com> for some help with the second revision of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sanjeev Premi <premi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-05Merge branches 'non_hwmod_compliant_fix_3.1rc', 'omap3_clock_fixes_3.1rc', ↵Paul Walmsley
'omap4_clock_fixes_3.1rc', 'missing_2430_musb_adds_terminator_fix_3.1rc' and 'pwrdm_clkdm_fixes_3.1rc' into prcm-fixes-a-3.1rc
2011-09-05OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[]Paul Walmsley
Add a missing array terminator to omap2430_usbhsotg_addrs[]. Without this terminator, the omap_hwmod resource building code runs off the end of the array, resulting in at least this error -- if not worse behavior: [ 0.578002] musb-omap2430: failed to claim resource 4 [ 0.583465] omap_device: musb-omap2430: build failed (-16) [ 0.589294] Could not build omap_device for musb-omap2430 usb_otg_hs This should have been part of commit 78183f3fdf76f422431a81852468be01b36db325 ("omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays") but was evidently missed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-08-22OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomainPaul Walmsley
The oscillator that supplies GPT12_FCLK and WDT1_FCLK exists in the WKUP powerdomain[1]. This resolves at least one boot-time warning: omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck. 1. _OMAP34xx Multimedia High Security (HS) Device Silicon Revision 3.1.x Security Addendum Version K (SWPU119K)_ Figure 3-29. August 2010.
2011-08-21OMAP4: clock: fix compile warningPaul Walmsley
Fix the following compile warning: arch/arm/mach-omap2/clock44xx_data.c: In function 'omap4xxx_clk_init': arch/arm/mach-omap2/clock44xx_data.c:3371:6: warning: 'cpu_clkflg' may be used uninitialized in this function The approach taken here is intended to work if omap4xxx_clk_init() is converted into an initcall. Thanks to Bjarne Steinsbo <bsteinsbo@gmail.com> for proposing another approach. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Bjarne Steinsbo <bsteinsbo@gmail.com>
2011-08-19OMAP4: clock: re-enable previous clockdomain enable/disable sequencePaul Walmsley
After commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the recommended PRCM module enable sequence"), device drivers for OMAP IP blocks that do not use runtime PM can cause oopses or kernel instability[1][2]. This is because those non-runtime PM drivers do not use the hwmod code, which implements the correct IP block enable and disable sequence. Several options for dealing with this problem have been proposed: 1. Add a new field to the OMAP struct clk to mark clocks that are currently used by non-runtime PM drivers. Modify the clock code to use the old clockdomain sequence for these marked clocks. As drivers are converted to use runtime PM, remove the annotation from the clocks. 2. Similar to #1, but associate the flag with the struct omap_clk instead. 3. Add IDLEST wait support to the OMAP4 clock code, similar to the way it is implemented for OMAP2/3, and enable it in each struct clk currently used by non-runtime PM drivers. As drivers are converted to use runtime PM, remove the annotation from the clocks. 4. Do nothing; leave the problem to those responsible for the unconverted drivers. 5. Re-enable clock-based clockdomain control in the OMAP4 clock code. This would revert back to the behavior of Linux 3.0, simply with a slightly longer module enable/disable latency. Unfortunately, no approach seemed particularly good. Options 1 through 3 seemed unwise due to the following reasons: A. The OMAP struct clks are intended primarily to describe hardware clock nodes, and the intention is that no driver-specific data should be stored there (applies to #1) B. The resulting patch would have been quite large for the -rc series (applies to #1, #2, #3) C. The patch would have been a new, yet temporary hack; and similar fixes have drawn negative comments in the recent past (see for example [3]) Option 4 is undesirable because commit 665d001338b494d6d62810aa99b4c0fa1a0884b9 ("OMAP2+: hwmod: Follow the recommended PRCM module enable sequence") has resulted in a less stable kernel; and kernel stability is more important than OMAP4 power management. Option 5 is the approach taken in this patch. This seemed to be the least intrusive approach for 3.1-rc. The approach in this patch was originally proposed by Ohad Ben-Cohen <ohad@wizery.com>. I'm simply writing the commit message and passing it along. ... Thanks to Luciano Coelho <coelho@ti.com> for reporting the problem. Thanks to Ohad Ben-Cohen <ohad@wizery.com> for tracking the problem down, generating a temporary workaround, and proposing a patch to deal with the problem. Thanks to Rajendra Nayak <rnayak@ti.com> for proposing another patch to deal with the problem. Thanks to Felipe Balbi <balbi@ti.com> for comments. 1. Coelho, Luciano <coelho@ti.com>. _Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda_. Tue, 09 Aug 2011 14:26:08 +0300. Posted to the <linux-omap@vger.kernel.org> mailing list. Available from (among others) http://www.spinics.net/linux/lists/linux-omap/msg55213.html 2. Munegowda, Keshava <keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd when booting 3.0.0-rc2 on panda_. Thu, 11 Aug 2011 13:51:05 +0530. Posted to the <linux-omap@vger.kernel.org> mailing list. Available from (among others) http://www.spinics.net/linux/lists/linux-omap/msg55371.html 3. King, Russell <linux@arm.linux.org.uk>. _Re: [PATCH 5/8] OMAP4: PM: TEMP: Prevent l3init from idling/force sleep_. Thu, 23 Jun 2011 16:22:49 +0100. Posted to the <linux-omap@vger.kernel.org> mailing list. Available from (among others) http://www.mail-archive.com/linux-omap@vger.kernel.org/msg51392.html Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Luciano Coelho <coelho@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-08-19OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain ↵Santosh Shilimkar
force wakeup While using clockdomain force wakeup method, not waiting for powerdomain to be effectively ON may end up locking the clockdomain FSM until a next wakeup event occurs. One such issue was seen on OMAP4430, where L4_PER was periodically getting stuck in in-transition state when transitioning from from OSWR to ON. This issue was reported and investigated by Patrick Titiano <p-titiano@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reported-by: Patrick Titiano <p-titiano@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: updated to apply; added transition wait on clkdm_deny_idle(); remove two superfluous pwrdm_wait_transition() calls] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-08-19OMAP: powerdomains: Make all powerdomain target states as ON at initRajendra Nayak
Program all powerdomain target state as ON; this is to prevent domains from hitting low power states (if bootloader has target states set to something other than ON) and potentially even losing context while PM is not fully initialized, which can cause the system to crash. The PM late init code can then program the desired target state for all the power domains. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [paul@pwsan.com: dropped comment typo hunk; fixed comment indent and moved to kerneldoc; moved code to pwrdm_init(); changed pwrdm_init() argument name to prevent clash; cleaned up patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-08-10omap: timer: Set dmtimer used as clocksource in autoreload modeHemant Pedanekar
If CONFIG_OMAP_32K_TIMER is not selected and dmtimer is used as clocksource, the timer stops counting once overflow occurs as it was not set in autoreload mode. This results into timekeeping failure: for example, 'sleep 1' at the shell after the timer counter overflow would hang. This patch sets up autoreload when starting the clocksource timer which fixes the above issue. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10OMAP3: am3517crane: remove NULL board_mux from board fileJohan Hovold
Since 7203f8a48bb63015ebe58a6f2a38aec1cb208b9d (arm: mach-omap2: remove NULL board_mux from board files) NULL board_mux is defined in mux.h. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10arm: mach-omap2: mux: use kstrdup()Thomas Meyer
Use kstrdup rather than duplicating its implementation The semantic patch that makes this output is available in scripts/coccinelle/api/kstrdup.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10Merge branch 'for_3.1/pm-fixes' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into fixes
2011-08-10OMAP: hwmod: fix build break on non-OMAP4 multi-OMAP2 buildsPaul Walmsley
Builds for multi-OMAP2 (e.g., OMAP2420 with OMAP2430) with CONFIG_ARCH_OMAP4=n fail with the following errors: arch/arm/mach-omap2/built-in.o: In function `_enable_module': arch/arm/mach-omap2/omap_hwmod.c:701: undefined reference to `omap4_cminst_module_enable' arch/arm/mach-omap2/built-in.o: In function `_disable_module': arch/arm/mach-omap2/omap_hwmod.c:726: undefined reference to `omap4_cminst_module_disable' arch/arm/mach-omap2/built-in.o: In function `_wait_target_disable': arch/arm/mach-omap2/omap_hwmod.c:1179: undefined reference to `omap4_cminst_wait_module_idle' This is probably due to the preprocessor directives in arch/arm/plat-omap/include/plat/cpu.h that convert some cpu_is_omap*() expressions from preprocessor directives into something that is only resolvable during runtime, if multiple OMAP2 build targets are selected. Thanks to Tony Lindgren <tony@atomide.com> for reporting. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only buildsPeter Ujfalusi
Commit b22f954 (OMAP4: Move common twl6030 configuration to twl-common) caused compile failures for code for OMAP arch which is not selected by the config. Fixes issues like: With CONFIG_ARCH_OMAP3=y and CONFIG_ARCH_OMAP4=n, I'm getting this: arch/arm/mach-omap2/built-in.o:(.data+0xf99c): undefined reference to `omap4430_phy_init' arch/arm/mach-omap2/built-in.o:(.data+0xf9a0): undefined reference to `omap4430_phy_exit' arch/arm/mach-omap2/built-in.o:(.data+0xf9a4): undefined reference to `omap4430_phy_power' arch/arm/mach-omap2/built-in.o:(.data+0xf9a8): undefined reference to `omap4430_phy_set_clk' arch/arm/mach-omap2/built-in.o:(.data+0xf9ac): undefined reference to `omap4430_phy_suspend' Fix the problem by moving the code to ifdef sections for omap3 and omap4. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v0.10.2 at 2024-11-10 03:09:44 (GMT)