summaryrefslogtreecommitdiff
path: root/arch/arm64/Kconfig
AgeCommit message (Collapse)Author
2017-06-28Merge branch 'lsk/kdump/for-v4.9' into linux-linaro-lsk-v4.9Alex Shi
2017-06-08arm64: kdump: provide /proc/vmcore fileAKASHI Takahiro
Arch-specific functions are added to allow for implementing a crash dump file interface, /proc/vmcore, which can be viewed as a ELF file. A user space tool, like kexec-tools, is responsible for allocating a separate region for the core's ELF header within crash kdump kernel memory and filling it in when executing kexec_load(). Then, its location will be advertised to crash dump kernel via a new device-tree property, "linux,elfcorehdr", and crash dump kernel preserves the region for later use with reserve_elfcorehdr() at boot time. On crash dump kernel, /proc/vmcore will access the primary kernel's memory with copy_oldmem_page(), which feeds the data page-by-page by ioremap'ing it since it does not reside in linear mapping on crash dump kernel. Meanwhile, elfcorehdr_read() is simple as the region is always mapped. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: James Morse <james.morse@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-05-27arm64: Enable CONFIG_ARM64_SW_TTBR0_PANCatalin Marinas
This patch adds the Kconfig option to enable support for TTBR0 PAN emulation. The option is default off because of a slight performance hit when enabled, caused by the additional TTBR0_EL1 switching during user access operations or exception entry/exit code. Cc: Will Deacon <will.deacon@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> (cherry picked from commit ba42822af1c287f038aa550f3578c61c212a892e) Signed-off-by: Alex Shi <alex.shi@linaro.org>
2017-05-27arm64: split thread_info from task stackMark Rutland
This patch moves arm64's struct thread_info from the task stack into task_struct. This protects thread_info from corruption in the case of stack overflows, and makes its address harder to determine if stack addresses are leaked, making a number of attacks more difficult. Precise detection and handling of overflow is left for subsequent patches. Largely, this involves changing code to store the task_struct in sp_el0, and acquire the thread_info from the task struct. Core code now implements current_thread_info(), and as noted in <linux/sched.h> this relies on offsetof(task_struct, thread_info) == 0, enforced by core code. This change means that the 'tsk' register used in entry.S now points to a task_struct, rather than a thread_info as it used to. To make this clear, the TI_* field offsets are renamed to TSK_TI_*, with asm-offsets appropriately updated to account for the structural change. Userspace clobbers sp_el0, and we can no longer restore this from the stack. Instead, the current task is cached in a per-cpu variable that we can safely access from early assembly as interrupts are disabled (and we are thus not preemptible). Both secondary entry and idle are updated to stash the sp and task pointer separately. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: James Morse <james.morse@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> (cherry picked from commit c02433dd6de32f042cf3ffe476746b1115b8c096) Signed-off-by: Alex Shi <alex.shi@linaro.org>
2017-03-22irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065Shanker Donthineni
commit 90922a2d03d84de36bf8a9979d62580102f31a92 upstream. On Qualcomm Datacenter Technologies QDF2400 SoCs, the ITS hardware implementation uses 16Bytes for Interrupt Translation Entry (ITE), but reports an incorrect value of 8Bytes in GITS_TYPER.ITTE_size. It might cause kernel memory corruption depending on the number of MSI(x) that are configured and the amount of memory that has been allocated for ITEs in its_create_device(). This patch fixes the potential memory corruption by setting the correct ITE size to 16Bytes. Cc: stable@vger.kernel.org Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-17arm64: kaslr: keep modules close to the kernel when DYNAMIC_FTRACE=yArd Biesheuvel
The RANDOMIZE_MODULE_REGION_FULL Kconfig option allows KASLR to be configured in such a way that kernel modules and the core kernel are allocated completely independently, which implies that modules are likely to require branches via PLT entries to reach the core kernel. The dynamic ftrace code does not expect that, and assumes that it can patch module code to perform a relative branch to anywhere in the core kernel. This may result in errors such as branch_imm_common: offset out of range ------------[ cut here ]------------ WARNING: CPU: 3 PID: 196 at kernel/trace/ftrace.c:1995 ftrace_bug+0x220/0x2e8 Modules linked in: CPU: 3 PID: 196 Comm: systemd-udevd Not tainted 4.8.0-22-generic #24 Hardware name: AMD Seattle/Seattle, BIOS 10:34:40 Oct 6 2016 task: ffff8d1bef7dde80 task.stack: ffff8d1bef6b0000 PC is at ftrace_bug+0x220/0x2e8 LR is at ftrace_process_locs+0x330/0x430 So make RANDOMIZE_MODULE_REGION_FULL mutually exclusive with DYNAMIC_FTRACE at the Kconfig level. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-08atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVEVineet Gupta
This came to light when implementing native 64-bit atomics for ARCv2. The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE to check whether atomic64_dec_if_positive() is available. It seems it was needed when not every arch defined it. However as of current code the Kconfig option seems needless - for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a generic definition of API is present lib/atomic64.c - arches with native 64-bit atomics select it in arch/*/Kconfig and define the API in their headers So I see no point in keeping the Kconfig option Compile tested for: - blackfin (CONFIG_GENERIC_ATOMIC64) - x86 (!CONFIG_GENERIC_ATOMIC64) - ia64 Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.com Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ming Lin <ming.l@ssi.samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08arm64 Kconfig: select gigantic pageYisheng Xie
Arm64 supports gigantic pages after commit 084bd29810a5 ("ARM64: mm: HugeTLB support.") however, it can only be allocated at boottime and can't be freed. This patch selects ARCH_HAS_GIGANTIC_PAGE to make gigantic pages can be allocated and freed at runtime for arch arm64. Link: http://lkml.kernel.org/r/1475227569-63446-3-git-send-email-xieyisheng1@huawei.com Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-05Merge tag 'gpio-v4.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...
2016-10-04Merge tag 'tty-4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big tty and serial patch set for 4.9-rc1. It also includes some drivers/dma/ changes, as those were needed by some serial drivers, and they were all acked by the DMA maintainer. Also in here is the long-suffering ACPI SPCR patchset, which was passed around from maintainer to maintainer like a hot-potato. Seems I was the sucker^Wlucky one. All of those patches have been acked by the various subsystem maintainers as well. All of this has been in linux-next with no reported issues" * tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits) Revert "serial: pl011: add console matching function" MAINTAINERS: update entry for atmel_serial driver serial: pl011: add console matching function ARM64: ACPI: enable ACPI_SPCR_TABLE ACPI: parse SPCR and enable matching console of/serial: move earlycon early_param handling to serial Revert "drivers/tty: Explicitly pass current to show_stack" tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq nios2: dts: 10m50: Add tx-threshold parameter serial: 8250: Set Altera 16550 TX FIFO Threshold serial: 8250: of: Load TX FIFO Threshold from DT Documentation: dt: serial: Add TX FIFO threshold parameter drivers/tty: Explicitly pass current to show_stack serial: imx: Fix DCD reading serial: stm32: mark symbols static where possible serial: xuartps: Add some register initialisation to cdns_early_console_setup() serial: xuartps: Removed unwanted checks while reading the error conditions serial: xuartps: Rewrite the interrupt handling logic serial: stm32: use mapbase instead of membase for DMA tty/serial: atmel: fix fractional baud rate computation ...
2016-09-28ARM64: ACPI: enable ACPI_SPCR_TABLEAleksey Makarov
SBBR mentions SPCR as a mandatory ACPI table. So enable it for ARM64 Earlycon should be set up as early as possible. ACPI boot tables are mapped in arch/arm64/kernel/acpi.c:acpi_boot_table_init() that is called from setup_arch() and that's where we parse SPCR. So it has to be opted-in per-arch. When ACPI_SPCR_TABLE is defined initialization of DT earlycon is deferred until the DT/ACPI decision is done. Initialize DT earlycon if ACPI is disabled. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28arm64: Kconfig: remove SMP dependence for NUMAKefeng Wang
The arm64 forces CONFIG_SMP=y with commit 4b3dc9679cf7, no need to add SMP dependence for NUMA. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-26arm64: Kconfig: select OF/ACPI_NUMA under NUMA configKefeng Wang
Move OF_NUMA select under NUMA config, and select ACPI_NUMA when ACPI enabled. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-23arm/arm64: arch_timer: Use archdata to indicate vdso suitabilityScott Wood
Instead of comparing the name to a magic string, use archdata to explicitly communicate whether the arch timer is suitable for direct vdso access. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-13Merge tag 'v4.8-rc2' into develLinus Walleij
Linux 4.8-rc2
2016-09-09arm64/numa: support HAVE_SETUP_PER_CPU_AREAZhen Lei
To make each percpu area allocated from its local numa node. Without this patch, all percpu areas will be allocated from the node which cpu0 belongs to. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-31arm64: don't select PERF_USE_VMALLOC by defaultKim Phillips
Any arm64 based parts that have cache aliasing issues can set it manually. Apparently dragged in from ARM(32) defaults in commit 8c2c3df "arm64: Build infrastructure". Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-26arm64: errata: Pass --fix-cortex-a53-843419 to ld if workaround enabledWill Deacon
Cortex-A53 erratum 843419 is worked around by the linker, although it is a configure-time option to GCC as to whether ld is actually asked to apply the workaround or not. This patch ensures that we pass --fix-cortex-a53-843419 to the linker when both CONFIG_ARM64_ERRATUM_843419=y and the linker supports the option. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-26arm64: always enable DEBUG_RODATA and remove the Kconfig optionMark Rutland
Follow the example set by x86 in commit 9ccaf77cf05915f5 ("x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option"), and make these protections a fundamental security feature rather than an opt-in. This also results in a minor code simplification. For those rare cases when users wish to disable this protection (e.g. for debugging), this can be done by passing 'rodata=off' on the command line. As DEBUG_RODATA_ALIGN is only intended to address a performance/memory tradeoff, and does not affect correctness, this is left user-selectable. DEBUG_MODULE_RONX is also left user-selectable until the core code provides a boot-time option to disable the protection for debugging use-cases. Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-25arm64: hibernate: Support DEBUG_PAGEALLOCJames Morse
DEBUG_PAGEALLOC removes the valid bit of page table entries to prevent any access to unallocated memory. Hibernate uses this as a hint that those pages don't need to be saved/restored. This patch adds the kernel_page_present() function it uses. hibernate.c copies the resume kernel's linear map for use during restore. Add _copy_pte() to fill-in the holes made by DEBUG_PAGEALLOC in the resume kernel, so we can restore data the original kernel had at these addresses. Finally, DEBUG_PAGEALLOC means the linear-map alias of KERNEL_START to KERNEL_END may have holes in it, so we can't lazily clean this whole area to the PoC. Only clean the new mmuoff region, and the kernel/kvm idmaps. This reverts commit da24eb1f3f9e2c7b75c5f8c40d8e48e2c4789596. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-08Merge tag 'usercopy-v4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull usercopy protection from Kees Cook: "Tbhis implements HARDENED_USERCOPY verification of copy_to_user and copy_from_user bounds checking for most architectures on SLAB and SLUB" * tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: SLUB hardened usercopy support mm: SLAB hardened usercopy support s390/uaccess: Enable hardened usercopy sparc/uaccess: Enable hardened usercopy powerpc/uaccess: Enable hardened usercopy ia64/uaccess: Enable hardened usercopy arm64/uaccess: Enable hardened usercopy ARM: uaccess: Enable hardened usercopy x86/uaccess: Enable hardened usercopy mm: Hardened usercopy mm: Implement stack frame object validation mm: Add is_migrate_cma_page
2016-08-08arm64: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. Cc: Michael Büsch <m@bues.ch> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-02Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-08-02Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - GCC plugin support by Emese Revfy from grsecurity, with a fixup from Kees Cook. The plugins are meant to be used for static analysis of the kernel code. Two plugins are provided already. - reduction of the gcc commandline by Arnd Bergmann. - IS_ENABLED / IS_REACHABLE macro enhancements by Masahiro Yamada - bin2c fix by Michael Tautschnig - setlocalversion fix by Wolfram Sang * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: gcc-plugins: disable under COMPILE_TEST kbuild: Abort build on bad stack protector flag scripts: Fix size mismatch of kexec_purgatory_size kbuild: make samples depend on headers_install Kbuild: don't add obj tree in additional includes Kbuild: arch: look for generated headers in obtree Kbuild: always prefix objtree in LINUXINCLUDE Kbuild: avoid duplicate include path Kbuild: don't add ../../ to include path vmlinux.lds.h: replace config_enabled() with IS_ENABLED() kconfig.h: allow to use IS_{ENABLE,REACHABLE} in macro expansion kconfig.h: use already defined macros for IS_REACHABLE() define export.h: use __is_defined() to check if __KSYM_* is defined kconfig.h: use __is_defined() to check if MODULE is defined kbuild: setlocalversion: print error to STDERR Add sancov plugin Add Cyclomatic complexity GCC plugin GCC plugin infrastructure Shared library support
2016-08-01Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', ↵Bjorn Helgaas
'pci/pm' and 'pci/virtualization' into next * pci/aspm: PCI/ASPM: Remove redundant check of pcie_set_clkpm * pci/dpc: PCI: Remove DPC tristate module option PCI: Bind DPC to Root Ports as well as Downstream Ports PCI: Fix whitespace in struct dpc_dev PCI: Convert Downstream Port Containment driver to use devm_* functions * pci/hotplug: PCI: Allow additional bus numbers for hotplug bridges * pci/misc: PCI: Include <asm/dma.h> for isa_dma_bridge_buggy PCI: Make bus_attr_resource_alignment static MAINTAINERS: Add file patterns for PCI device tree bindings PCI: Fix comment typo * pci/msi: PCI/MSI: irqchip: Fix PCI_MSI dependencies * pci/pm: PCI: pciehp: Ignore interrupts during D3cold PCI: Document connection between pci_power_t and hardware PM capability PCI: Add runtime PM support for PCIe ports ACPI / hotplug / PCI: Runtime resume bridge before rescan PCI: Power on bridges before scanning new devices PCI: Put PCIe ports into D3 during suspend PCI: Don't clear d3cold_allowed for PCIe ports PCI / PM: Enforce type casting for pci_power_t * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9220 PCI: Add DMA alias quirk for Adaptec 3805 PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
2016-07-27Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Kexec support for arm64 - Kprobes support - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs - Trapping of user space cache maintenance operations and emulation in the kernel (CPU errata workaround) - Clean-up of the early page tables creation (kernel linear mapping, EFI run-time maps) to avoid splitting larger blocks (e.g. pmds) into smaller ones (e.g. ptes) - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime() - ARCH_HAS_KCOV enabled for arm64 - Optimise IP checksum helpers - SWIOTLB optimisation to only allocate/initialise the buffer if the available RAM is beyond the 32-bit mask - Properly handle the "nosmp" command line argument - Fix for the initialisation of the CPU debug state during early boot - vdso-offsets.h build dependency workaround - Build fix when RANDOMIZE_BASE is enabled with MODULES off * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits) arm64: arm: Fix-up the removal of the arm64 regs_query_register_name() prototype arm64: Only select ARM64_MODULE_PLTS if MODULES=y arm64: mm: run pgtable_page_ctor() on non-swapper translation table pages arm64: mm: make create_mapping_late() non-allocating arm64: Honor nosmp kernel command line option arm64: Fix incorrect per-cpu usage for boot CPU arm64: kprobes: Add KASAN instrumentation around stack accesses arm64: kprobes: Cleanup jprobe_return arm64: kprobes: Fix overflow when saving stack arm64: kprobes: WARN if attempting to step with PSTATE.D=1 arm64: debug: remove unused local_dbg_{enable, disable} macros arm64: debug: remove redundant spsr manipulation arm64: debug: unmask PSTATE.D earlier arm64: localise Image objcopy flags arm64: ptrace: remove extra define for CPSR's E bit kprobes: Add arm64 case in kprobe example module arm64: Add kernel return probes support (kretprobes) arm64: Add trampoline code for kretprobes arm64: kprobes instruction simulation support arm64: Treat all entry code as non-kprobe-able ...
2016-07-26arm64: Only select ARM64_MODULE_PLTS if MODULES=yCatalin Marinas
Selecting CONFIG_RANDOMIZE_BASE=y and CONFIG_MODULES=n fails to build the module PLTs support: CC arch/arm64/kernel/module-plts.o /work/Linux/linux-2.6-aarch64/arch/arm64/kernel/module-plts.c: In function ‘module_emit_plt_entry’: /work/Linux/linux-2.6-aarch64/arch/arm64/kernel/module-plts.c:32:49: error: dereferencing pointer to incomplete type ‘struct module’ This patch selects ARM64_MODULE_PLTS conditionally only if MODULES is enabled. Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> # 4.6+ Reported-by: Jeff Vander Stoep <jeffv@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-26arm64/uaccess: Enable hardened usercopyKees Cook
Enables CONFIG_HARDENED_USERCOPY checks on arm64. As done by KASAN in -next, renames the low-level functions to __arch_copy_*_user() so a static inline can do additional work before the copy. Signed-off-by: Kees Cook <keescook@chromium.org>
2016-07-21Merge branch 'for-next/kprobes' into for-next/coreCatalin Marinas
* kprobes: arm64: kprobes: Add KASAN instrumentation around stack accesses arm64: kprobes: Cleanup jprobe_return arm64: kprobes: Fix overflow when saving stack arm64: kprobes: WARN if attempting to step with PSTATE.D=1 kprobes: Add arm64 case in kprobe example module arm64: Add kernel return probes support (kretprobes) arm64: Add trampoline code for kretprobes arm64: kprobes instruction simulation support arm64: Treat all entry code as non-kprobe-able arm64: Blacklist non-kprobe-able symbol arm64: Kprobes with single stepping support arm64: add conditional instruction simulation support arm64: Add more test functions to insn.c arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature
2016-07-19arm64: Add kernel return probes support (kretprobes)Sandeepa Prabhu
The pre-handler of this special 'trampoline' kprobe executes the return probe handler functions and restores original return address in ELR_EL1. This way the saved pt_regs still hold the original register context to be carried back to the probed kernel function. Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com> Signed-off-by: David A. Long <dave.long@linaro.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-19arm64: Kprobes with single stepping supportSandeepa Prabhu
Add support for basic kernel probes(kprobes) and jump probes (jprobes) for ARM64. Kprobes utilizes software breakpoint and single step debug exceptions supported on ARM v8. A software breakpoint is placed at the probe address to trap the kernel execution into the kprobe handler. ARM v8 supports enabling single stepping before the break exception return (ERET), with next PC in exception return address (ELR_EL1). The kprobe handler prepares an executable memory slot for out-of-line execution with a copy of the original instruction being probed, and enables single stepping. The PC is set to the out-of-line slot address before the ERET. With this scheme, the instruction is executed with the exact same register context except for the PC (and DAIF) registers. Debug mask (PSTATE.D) is enabled only when single stepping a recursive kprobe, e.g.: during kprobes reenter so that probed instruction can be single stepped within the kprobe handler -exception- context. The recursion depth of kprobe is always 2, i.e. upon probe re-entry, any further re-entry is prevented by not calling handlers and the case counted as a missed kprobe). Single stepping from the x-o-l slot has a drawback for PC-relative accesses like branching and symbolic literals access as the offset from the new PC (slot address) may not be ensured to fit in the immediate value of the opcode. Such instructions need simulation, so reject probing them. Instructions generating exceptions or cpu mode change are rejected for probing. Exclusive load/store instructions are rejected too. Additionally, the code is checked to see if it is inside an exclusive load/store sequence (code from Pratyush). System instructions are mostly enabled for stepping, except MSR/MRS accesses to "DAIF" flags in PSTATE, which are not safe for probing. This also changes arch/arm64/include/asm/ptrace.h to use include/asm-generic/ptrace.h. Thanks to Steve Capper and Pratyush Anand for several suggested Changes. Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Pratyush Anand <panand@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-19arm64: Add HAVE_REGS_AND_STACK_ACCESS_API featureDavid A. Long
Add HAVE_REGS_AND_STACK_ACCESS_API feature for arm64, including supporting functions and defines. Signed-off-by: David A. Long <dave.long@linaro.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> [catalin.marinas@arm.com: Remove unused functions] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-27arm64/kexec: Add core kexec supportGeoff Levand
Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to the arm64 architecture that add support for the kexec re-boot mechanism (CONFIG_KEXEC) on arm64 platforms. Signed-off-by: Geoff Levand <geoff@infradead.org> Reviewed-by: James Morse <james.morse@arm.com> [catalin.marinas@arm.com: removed dead code following James Morse's comments] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-22Revert "arm64: Add support ARCH_SUPPORTS_INT128"Catalin Marinas
This reverts commit 6b14c517a2a866c8407e9864c1cd3fcc6fed55ab. The original patch and UBSAN+KASAN enabled causes Linux to fail to link with: lib/built-in.o: In function `get_signed_val': lib/ubsan.c:93: undefined reference to `__ashlti3' lib/ubsan.c:93: undefined reference to `__ashrti3' Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-21ACPI: ARM64: support for ACPI_TABLE_UPGRADEJon Masters
This patch adds support for ACPI_TABLE_UPGRADE for ARM64 To access initrd image we need to move initialization of linear mapping a bit earlier. The implementation of the feature acpi_table_upgrade() (drivers/acpi/tables.c) works with initrd data represented as an array in virtual memory. It uses some library utility to find the redefined tables in that array and iterates over it to copy the data to new allocated memory. So to access the initrd data via fixmap we need to rewrite it considerably. In x86 arch, kernel memory is already mapped by the time when acpi_table_upgrade() and acpi_boot_table_init() are called so I think that we can just move this mapping one function earlier too. Signed-off-by: Jon Masters <jcm@redhat.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-21arm64: allow building with kcov coverage on ARM64Alexander Potapenko
Add ARCH_HAS_KCOV to ARM64 config. To avoid potential crashes, disable instrumentation of the files in arch/arm64/kvm/hyp/*. Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-21arm64: Add support ARCH_SUPPORTS_INT128Kefeng Wang
The gcc support __SIZEOF_INT128__ and __int128 in arm64, thus, enable ARCH_SUPPORTS_INT128 to make mul_u64_u32_shr() a bit more efficient in scheduler. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15PCI/MSI: irqchip: Fix PCI_MSI dependenciesArnd Bergmann
The PCI_MSI symbol is used inconsistently throughout the tree, with some drivers using 'select' and others using 'depends on', or using conditional selects. This keeps causing problems; the latest one is a result of ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI driver without enabling MSI: warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI) drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type static struct msi_domain_info alpine_msix_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^ drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^~~~~~~~~~~~~~~~~~~~~~~~ There is little reason to enable PCI support for a platform that uses MSI but then leave MSI disabled at compile time. Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN. For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64, X86), enable it by default whenever MSI is enabled. [bhelgaas: changelog, omit crypto config change] Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-10ARM64: PCI: Support ACPI-based PCI host controllerTomasz Nowicki
Implement pci_acpi_scan_root() and other arch-specific calls so ARM64 can use ACPI to setup and enumerate PCI buses. Use memory-mapped configuration space information from either the ACPI _CBA method or the MCFG table and the ECAM library and generic ECAM config accessor ops. Implement acpi_pci_bus_find_domain_nr() to retrieve the domain number from the acpi_pci_root structure. Implement pcibios_add_bus() and pcibios_remove_bus() to call acpi_pci_add_bus() and acpi_pci_remove_bus() for ACPI slot management and other configuration. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-06-07GCC plugin infrastructureEmese Revfy
This patch allows to build the whole kernel with GCC plugins. It was ported from grsecurity/PaX. The infrastructure supports building out-of-tree modules and building in a separate directory. Cross-compilation is supported too. Currently the x86, arm, arm64 and uml architectures enable plugins. The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory there. The plugins compile with these options: * -fno-rtti: gcc is compiled with this option so the plugins must use it too * -fno-exceptions: this is inherited from gcc too * -fasynchronous-unwind-tables: this is inherited from gcc too * -ggdb: it is useful for debugging a plugin (better backtrace on internal errors) * -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h) * -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version variable, plugin-version.h) The infrastructure introduces a new Makefile target called gcc-plugins. It supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++). This script also checks the availability of the included headers in scripts/gcc-plugins/gcc-common.h. The gcc-common.h header contains frequently included headers for GCC plugins and it has a compatibility layer for the supported gcc versions. The gcc-generate-*-pass.h headers automatically generate the registration structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes. Note that 'make clean' keeps the *.so files (only the distclean or mrproper targets clean all) because they are needed for out-of-tree modules. Based on work created by the PaX Team. Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-06-03Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: - a few simple fixes for fallout from the recent gic-v3 changes - a workaround for a Cavium thunderX erratum - a bugfix for the pic32 irqchip to make external interrupts work proper - a missing return value in the generic IPI management code * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-pic32-evic: Fix bug with external interrupts. irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144 irqchip/gic-v3: Fix quiescence check in gic_enable_redist irqchip/gic-v3: Fix copy+paste mistakes in defines irqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask genirq: Fix missing return value in irq_destroy_ipi()
2016-06-03arm64: move {PAGE,CONT}_SHIFT into KconfigMark Rutland
In some cases (e.g. the awk for CONFIG_RANDOMIZE_TEXT_OFFSET) we would like to make use of PAGE_SHIFT outside of code that can include the usual header files. Add a new CONFIG_ARM64_PAGE_SHIFT for this, likewise with ARM64_CONT_SHIFT for consistency. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-02irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144Ganapatrao Kulkarni
The erratum fixes the hang of ITS SYNC command by avoiding inter node io and collections/cpu mapping on thunderx dual-socket platform. This fix is only applicable for Cavium's ThunderX dual-socket platform. Reviewed-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
2016-05-16bpf: split HAVE_BPF_JIT into cBPF and eBPF variantDaniel Borkmann
Split the HAVE_BPF_JIT into two for distinguishing cBPF and eBPF JITs. Current cBPF ones: # git grep -n HAVE_CBPF_JIT arch/ arch/arm/Kconfig:44: select HAVE_CBPF_JIT arch/mips/Kconfig:18: select HAVE_CBPF_JIT if !CPU_MICROMIPS arch/powerpc/Kconfig:129: select HAVE_CBPF_JIT arch/sparc/Kconfig:35: select HAVE_CBPF_JIT Current eBPF ones: # git grep -n HAVE_EBPF_JIT arch/ arch/arm64/Kconfig:61: select HAVE_EBPF_JIT arch/s390/Kconfig:126: select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES arch/x86/Kconfig:94: select HAVE_EBPF_JIT if X86_64 Later code also needs this facility to check for eBPF JITs. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28arm64: kconfig: drop CONFIG_RTC_LIB dependencyEzequiel Garcia
The rtc-lib dependency is not required, and seems it was just copy-pasted from ARM's Kconfig. If platform requires rtc-lib, they should select it individually. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-28arm64: make ARCH_SUPPORTS_DEBUG_PAGEALLOC depend on !HIBERNATIONWill Deacon
Selecting both DEBUG_PAGEALLOC and HIBERNATION results in a build failure: | kernel/built-in.o: In function `saveable_page': | memremap.c:(.text+0x100f90): undefined reference to `kernel_page_present' | kernel/built-in.o: In function `swsusp_save': | memremap.c:(.text+0x1026f0): undefined reference to `kernel_page_present' | make: *** [vmlinux] Error 1 James sayeth: "This is caused by DEBUG_PAGEALLOC, which clears the PTE_VALID bit from 'free' pages. Hibernate uses it as a hint that it shouldn't save/access that page. This function is used to test whether the PTE_VALID bit has been cleared by kernel_map_pages(), hibernate is the only user. Fixing this exposes a bigger problem with that configuration though: if the resume kernel has cut free pages out of the linear map, we copy this swiss-cheese view of memory, and try to use it to restore... We can fixup the copy of the linear map, but it then explodes in my lazy 'clean the whole kernel to PoC' after resume, as now both the kernel and linear map have holes in them." On closer inspection, the whole Kconfig machinery around DEBUG_PAGEALLOC, HIBERNATION, ARCH_SUPPORTS_DEBUG_PAGEALLOC and PAGE_POISONING looks like it might need some affection. In particular, DEBUG_ALLOC has: > depends on !HIBERNATION || ARCH_SUPPORTS_DEBUG_PAGEALLOC && !PPC && !SPARC which looks pretty fishy. For the moment, require ARCH_SUPPORTS_DEBUG_PAGEALLOC to depend on !HIBERNATION on arm64 and get allmodconfig building again. Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-28arm64: kernel: Add support for hibernate/suspend-to-diskJames Morse
Add support for hibernate/suspend-to-disk. Suspend borrows code from cpu_suspend() to write cpu state onto the stack, before calling swsusp_save() to save the memory image. Restore creates a set of temporary page tables, covering only the linear map, copies the restore code to a 'safe' page, then uses the copy to restore the memory image. The copied code executes in the lower half of the address space, and once complete, restores the original kernel's page tables. It then calls into cpu_resume(), and follows the normal cpu_suspend() path back into the suspend code. To restore a kernel using KASLR, the address of the page tables, and cpu_resume() are stored in the hibernate arch-header and the el2 vectors are pivotted via the 'safe' page in low memory. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Kevin Hilman <khilman@baylibre.com> # Tested on Juno R2 Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-20arm64: Kconfig: remove redundant HAVE_ARCH_TRANSPARENT_HUGEPAGE definitionYang Shi
HAVE_ARCH_TRANSPARENT_HUGEPAGE has been defined in arch/Kconfig already, the ARM64 version is identical with it and the default value is Y. So remove the redundant definition and just select it under CONFIG_ARM64. Signed-off-by: Yang Shi <yang.shi@linaro.org> [will: sort into alphabetical order whilst I'm resolving conflicts] Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-15arm64, mm, numa: Add NUMA balancing support for arm64.Ganapatrao Kulkarni
Enable NUMA balancing for arm64 platforms. Add pte, pmd protnone helpers for use by automatic NUMA balancing. Reviewed-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Will Deacon <will.deacon@arm.com>